I think "set debugvarobj" has the wrong name.
It ought to be "set debug varobj", like gdb's other debug settings.
This patch makes the change.
I chose not to install deprecated aliases, since this is only a debug
setting; but if someone feels strongly about it I will add them.
Built and regtested on x86-64 Fedora 20.
2014-04-29 Tom Tromey <tromey@redhat.com>
* varobj.c (_initialize_varobj): Rename to "set debug varobj" and
"show debug varobj".
2014-04-29 Tom Tromey <tromey@redhat.com>
* gdb.texinfo (Debugging Output): Rename to "set debug varobj" and
"show debug varobj".
* msp430-sim.c (sim_open): Do not allocate memory over the
hardware multiply registers.
(get_op): Add support for reads from the hardware multiply
registers.
(put_op): Add support for writes to the hardware multiply
registers.
(msp430_step_once): Add support for the RETI instruction used by
the CPUX architecture.
This adds support for the load-link/store-conditional
l.lwa/l.swa atomic instructions.
The support is added in such way, that the cpu description not
only describes the mnemonics, but also the functionality.
A couple of fixes to typos in nearby/related code are also snuck
into this.
cpu/
* or1korbis.cpu (h-atomic-reserve): New hardware.
(h-atomic-address): Likewise.
(insn-opcode): Add opcodes for LWA and SWA.
(atomic-reserve): New operand.
(atomic-address): Likewise.
(l-lwa, l-swa): New instructions.
(l-lbs): Fix typo in comment.
(store-insn): Clear atomic reserve on store to atomic-address.
Fix register names in fmt field.
opcodes/
* or1k-desc.c: Regenerated.
* or1k-desc.h: Likewise.
* or1k-opc.c: Likewise.
* or1k-opc.h: Likewise.
* or1k-opinst.c: Likewise.
R_XTENSA_DIFF relocation offsets are in fact signed. Treat them as such.
Add testcase that examines ld behaviour on R_XTENSA_DIFF relocation
changing sign during relaxation.
2014-05-02 Volodymyr Arbatov <arbatov@cadence.com>
David Weatherford <weath@cadence.com>
Max Filippov <jcmvbkbc@gmail.com>
bfd/
* elf32-xtensa.c (relax_section): treat R_XTENSA_DIFF* relocations as
signed.
gas/
* config/tc-xtensa.c (md_apply_fix): mark BFD_RELOC_XTENSA_DIFF*
fixups as signed.
ld/testsuite/
* ld-xtensa/diff_overflow.exp, * ld-xtensa/diff_overflow1.s,
* ld-xtensa/diff_overflow2.s: Add test for DIFF* relocation
signedness and overflow checking.
gdb/Changelog:
* aarch64-tdep.c (aarch64_software_single_step): New function.
(aarch64_gdbarch_init): Handle single stepping of atomic sequences
with aarch64_software_single_step.
gdb/testsuite/ChangeLog:
* gdb.arch/aarch64-atomic-inst.c: New file.
* gdb.arch/aarch64-atomic-inst.exp: New file.
This patch firstly adds support for mips32r3 mips32r5, mips64r3
and mips64r5. Secondly it adds support for the eretnc instruction.
ChangeLog:
bfd/
* aoutx.h (NAME (aout, machine_type)): Add mips32r3, mips64r3,
mips32r5 and mips64r5.
* archures.c (bfd_architecture): Likewise.
* bfd-in2.h (bfd_architecture): Likewise.
* cpu-mips.c (arch_info_struct): Likewise.
* elfxx-mips.c (mips_set_isa_flags): Likewise.
gas/
* tc-mips.c (ISA_SUPPORTS_MIPS16E): Add mips32r3, mips32r5, mips64r3
and mips64r5.
(ISA_HAS_64BIT_FPRS): Likewise.
(ISA_HAS_ROR): Likewise.
(ISA_HAS_ODD_SINGLE_FPR): Likewise.
(ISA_HAS_MXHC1): Likewise.
(hilo_interlocks): Likewise.
(md_longopts): Likewise.
(ISA_HAS_64BIT_REGS): Add mips64r3 and mips64r5.
(ISA_HAS_DROR): Likewise.
(options): Add OPTION_MIPS32R3, OPTION_MIPS32R5, OPTION_MIPS64R3, and
OPTION_MIPS64R5.
(mips_isa_rev): Add support for mips32r3, mips32r5, mips64r3 and
mips64r5.
(md_parse_option): Likewise.
(s_mipsset): Likewise.
(mips_cpu_info_table): Add entries for mips32r3, mips32r5, mips64r3
and mips64r5. Also change p5600 entry to be mips32r5.
* configure.in: Add support for mips32r3, mips32r5, mips64r3 and
mips64r5.
* configure: Regenerate.
* doc/c-mips.texi: Document the -mips32r3, -mips32r5, -mips64r3 and
-mips64r5 command line options.
* doc/as.texinfo: Likewise.
gas/testsuite/
* gas/mips/mips.exp: Add MIPS32r5 tests. Also add the mips32r3,
mips32r5, mips64r3 and mips64r5 isas to the testsuite.
* gas/mips/r5.s: New test.
* gas/mips/r5.d: Likewise.
include/opcode/
* mips.h (INSN_ISA_MASK): Updated.
(INSN_ISA32R3): New define.
(INSN_ISA32R5): New define.
(INSN_ISA64R3): New define.
(INSN_ISA64R5): New define.
(INSN_ISA64, INSN_ISA64R2, INSN_ISA3_32, INSN_ISA3_32R2, INSN_ISA4_32
INSN_ISA4_32R2, INSN_ISA5_32R2): Renumbered.
(mips_isa_table): Add entries for mips32r3, mips32r5, mips64r3 and
mips64r5.
(INSN_UPTO32R3): New define.
(INSN_UPTO32R5): New define.
(INSN_UPTO64R3): New define.
(INSN_UPTO64R5): New define.
(ISA_MIPS32R3): New define.
(ISA_MIPS32R5): New define.
(ISA_MIPS64R3): New define.
(ISA_MIPS64R5): New define.
(CPU_MIPS32R3): New define.
(CPU_MIPS32R5): New define.
(CPU_MIPS64R3): New define.
(CPU_MIPS64R5): New define.
opcodes/
* mips-opc.c (mips_builtin_opcodes): Add MIPS32r5 eretnc instruction.
(I34): New define.
(I36): New define.
(I66): New define.
(I68): New define.
* mips-dis.c (mips_arch_choices): Add mips32r3, mips32r5, mips64r3 and
mips64r5.
(parse_mips_dis_option): Update MSA and virtualization support to
allow mips64r3 and mips64r5.
This fixes an issue with Mark Shinwell's "Rearrange MIPS INSN* masks" patch
(https://sourceware.org/ml/binutils/2007-11/msg00231.html). In the patch
the pref instruction had its membership flags changed from I4|I32|G3 to
I4_32|G3. Unfortunately G3 was defined as being I4, which made the actual
expanded flags as: I4|I32|I4 and therefore the membership flags should have
been I4_32. Since the patch was committed G3 was redefined to be I4|EE. This
fix just removes I4 from G3 making the expanded membership flags for pref as
I4_32|EE.
ChangeLog:
opcodes/
* mips-opc.c (G3): Remove I4.
Hi,
I recently see the fail in dwzbuildid.exp below on some targets,
(gdb) print the_int
No symbol "the_int" in current context.
(gdb) FAIL: gdb.dwarf2/dwzbuildid.exp: mismatch: print the_int
Looks the pattern expects to see "No symbol table is loaded", which
is emitted in c-exp.y,
variable: name_not_typename
....
if (msymbol.minsym != NULL)
write_exp_msymbol (pstate, msymbol);
else if (!have_full_symbols () && !have_partial_symbols ())
error (_("No symbol table is loaded. Use the \"file\" command."));
else
error (_("No symbol \"%s\" in current context."),
copy_name ($1.stoken));
it is expected to have no full symbols nor partial symbols, but something
brings full symbols or partial symbols in. I added "maint info symtabs"
and "maint info psymtabs" in dwzbuildid.exp, and it shows symbols are from
ld.so, which has debug information. Then, I reproduce the fail like this,
$ make check RUNTESTFLAGS="CFLAGS_FOR_TARGET='-Wl,-rpath=${glibc_build}:${glibc_build}/math -Wl,--dynamic-linker=${glibc_build}/elf/ld.so' dwzbuildid.exp"
${glibc_build} is the glibc build tree. Debug information is not striped,
so the test fail. However, if I strip debug information from libc.so, libm.so
and ld.so. The test passes.
This patch is to relax the pattern to match the both cases that glibc build
has and has not debug information.
gdb/testsuite:
2014-05-07 Yao Qi <yao@codesourcery.com>
* gdb.dwarf2/dwzbuildid.exp: Match output "No symbol "the_int" in
current context" too.
is no PLT.
gold/
PR gold/16900
* i386.cc (Output_data_got_plt_i386): New class.
(Output_data_plt_i386::Output_data_plt_i386): Change type of got_plt
parameter. Change all callers.
(Output_data_plt_i386::layout_): Remove.
(Output_data_plt_i386::got_plt_): Change type.
(Target_i386::got_plt_): Change type. Change all references.
(Target_i386::got_section): Create instance of new class.
(Output_data_got_plt_i386::do_write): New function.
* x86_64.cc (Output_data_got_plt_x86_64): New class.
(Output_data_plt_x86_64::Output_data_plt_x86_64): Change type of got_plt
parameter. Change all callers.
(Output_data_plt_x86_64::layout_): Remove.
(Output_data_plt_x86_64::got_plt_): Change type.
(Target_x86_64::got_plt_): Change type. Change all references.
(Target_x86_64::got_section): Create instance of new class.
(Output_data_got_plt_x86_64::do_write): New function.
(Output_data_plt_x86_64::do_write): Don't write reserved words in GOT.
(Target_x86_64<size>::init_got_plt_for_update): Create instance of new
class.
* elfxx-mips.h (elfxx-mips.h): Declare.
* elfxx-mips.c (mips_elf_merge_obj_attributes): Use it to report
Tag_GNU_MIPS_ABI_FP mismatches.
(_bfd_mips_fp_abi_string): New function.
This patch updates multiple opcode prefix processing:
1. Always print prefix together with bad opcode.
2. Since the last seen segment register prefix is active, we only print
the active segment register in the memory operand.
3. The 0xf2 and 0xf3 prefixes take precedence over the 0x66 prefix as the
opcode prefix. Also the last of the 0xf2 and 0xf3 prefixes wins.
4. Ignore invalid 0xf2/0xf3 prefixes if they aren't mandatory.
gas/testsuite/
PR binutils/16893
* gas/i386/katmai.d: Expect "gs" as prefix.
* gas/i386/long-1.s: Replace movapd with movss.
* gas/i386/x86-64-long-1.s: Likewise.
* gas/i386/long-1-intel.d: Updated.
* gas/i386/long-1.d: Likewise.
* gas/i386/x86-64-long-1-intel.d: Likewise.
* gas/i386/x86-64-long-1.d: Likewise.
* gas/i386/prefix.s: Add tests for multiple 0x66, 0x67, 0xf0,
0xf2 and 0xf3 prefixes.
* gas/i386/prefix.d: Updated.
opcodes/
PR binutils/16893
* i386-dis.c (twobyte_has_mandatory_prefix): New variable.
(end_codep): Likewise.
(mandatory_prefix): Likewise.
(active_seg_prefix): Likewise.
(ckprefix): Set active_seg_prefix to the active segment register
prefix.
(seg_prefix): Removed.
(get_valid_dis386): Use the last of PREFIX_REPNZ and PREFIX_REPZ
for prefix index. Ignore the index if it is invalid and the
mandatory prefix isn't required.
(print_insn): Set mandatory_prefix if the PREFIX_XXX prefix is
mandatory. Don't set PREFIX_REPZ/PREFIX_REPNZ/PREFIX_LOCK bits
in used_prefixes here. Don't print unused prefixes. Check
active_seg_prefix for the active segment register prefix.
Restore the DFLAG bit in sizeflag if the data size prefix is
unused. Check the unused mandatory PREFIX_XXX prefixes
(append_seg): Only print the segment register which gets used.
(OP_E_memory): Check active_seg_prefix for the segment register
prefix.
(OP_OFF): Likewise.
(OP_OFF64): Likewise.
(OP_DSreg): Set active_seg_prefix to PREFIX_DS if it is unset.
2014-05-05 Keith Seitz <keiths@redhat.com>
* linespec.c (linespec_parse_basic): Run cleanups if a convenience
variable or history value is successfully parsed.
2014-05-05 Keith Seitz <keiths@redhat.com>
* gdb.linespec/ls-dollar.exp: Add test for linespec
file:convenience_variable.
In gdb.trace/unavailable.exp, an action is defined to collect
struct_b.struct_a.array[2] and struct_b.struct_a.array[100],
struct StructB
{
int d, ef;
StructA struct_a;
int s:1;
static StructA static_struct_a;
const char *string;
};
and the other files are not collected.
When GDB examine traceframe collected by the action, "struct_b" is
unavailable completely, which is wrong.
(gdb) p struct_b
$1 = <unavailable>
When GDB reads 'struct_b', it will request to read memory at struct_b's address
of length LEN. Since struct_b.d is not collected, no 'M' block
includes the first part of the desired range, so tfile_xfer_partial returns
TARGET_XFER_UNAVAILABLE and GDB thinks the whole requested range is unavailable.
In order to fix this problem, in the iteration to 'M' blocks, we record the
lowest address of blocks within the request range. If it has, the requested
range isn't unavailable completely. This applies to ctf too. With this patch
applied, the result looks good and fails in unavailable.exp is fixed.
(gdb) p struct_b
$1 = {d = <unavailable>, ef = <unavailable>, struct_a = {a = <unavailable>, b = <unavailable>, array = {<unavailable>,
<unavailable>, -1431655766, <unavailable> <repeats 97 times>, -1431655766, <unavailable> <repeats 9899 times>}, ptr = <unavailable>, bitfield = <unavailable>}, s = <unavailable>, static static_struct_a = {a = <unavailable>, b = <unavailable>, array = {<unavailable> <repeats 10000 times>}, ptr = <unavailable>,
bitfield = <unavailable>}, string = <unavailable>}
gdb:
2014-05-05 Yao Qi <yao@codesourcery.com>
Pedro Alves <palves@redhat.com>
* tracefile-tfile.c (tfile_xfer_partial): Record the lowest
address of blocks that intersects the requested range. Trim
LEN up to LOW_ADDR_AVAILABLE if read from executable read-only
sections.
* ctf.c (ctf_xfer_partial): Likewise.
gdb/testsuite:
2014-05-05 Yao Qi <yao@codesourcery.com>
* gdb.trace/unavailable.exp (gdb_collect_args_test): Save
traceframes into tfile and ctf trace files. Read data from
trace file and test collected data.
(gdb_collect_locals_test): Likewise.
(gdb_unavailable_registers_test): Likewise.
(gdb_unavailable_floats): Likewise.
(gdb_collect_globals_test): Likewise.
(top-level): Append "ctf" to trace_file_targets if GDB
supports.
When I run refactored unavailable.exp, I find
command display behaves a little different on live inferior and on
examining traceframes. In live inferior, when command "display argc"
is typed, the value of "argc" is shown.
(gdb) display argc
1: argc = 1 '\001'
however, on tfile target, when command "display argc" is typed, the
value of "argc" is not shown.
(gdb) tfind
Found trace frame 0, tracepoint 1
at ../../../../git/gdb/testsuite/gdb.trace/unavailable.cc:198
198 i = (int) argc + argi + argf + argd + argstruct.memberi + argarray[1];
(gdb) display argc
I also notice that on "core" target, the value of "argc" isn't shown
either. This difference is caused by the code below in printcmd.c:display_command,
if (from_tty && target_has_execution)
do_one_display (new);
Looks the value of each display is shown if the target has execution.
Source code archaeology doesn't tell much about this requirement.
However, if we type command "display" then on "core" or "tfile"
target, the value of "argc" is still displayed,
for "core" target,
(gdb) display argc
(gdb) display
1: argc = 1 '\001'
for "tfile" target,
(gdb) display argc
(gdb) display
1: argc = <unavailable>
I feel that it is not necessary to have such "target has execution"
requirement to show the value of new created display. Auto-display is
a feature to show the value of expression frequently, has nothing to
do with whether target has execution or not. On the other hand, GDB
has the requirement for new created display, but command "display" can
still show them, this is an inconsistency, which should be fixed.
This patch is to remove the checking to target_has_execution from the
condition.
gdb:
2014-05-05 Yao Qi <yao@codesourcery.com>
* printcmd.c (display_command): Remove the check to
target_has_execution.
This patch moves traceframe checking code out of traceframe generation,
so that we can generation traceframe once, and do the checking in multiple
times (with target remote, tfile and ctf respectively). This is a
pure refactor, not functional changes in unavailable.exp.
gdb/testsuite:
2014-05-05 Yao Qi <yao@codesourcery.com>
* gdb.trace/unavailable.exp (gdb_collect_args_test): Move some
code to ...
(gdb_collect_args_test_1): ... it. New proc.
(gdb_collect_locals_test): Move some code to ...
(gdb_collect_locals_test_1): ... it. New proc.
(gdb_unavailable_registers_test): Move some code to ...
(gdb_unavailable_registers_test_1): ... it. New proc.
(gdb_unavailable_floats): Move some code to ...
(gdb_unavailable_floats_1): ... it. New proc.
This commit is actually an update to make the parser in
gdb/stap-probe.c be aware of all the possible prefixes that a probe
argument can have. According to the section "Argument Format" in:
<https://sourceware.org/systemtap/wiki/UserSpaceProbeImplementation>
The bitness of the arguments can be 8, 16, 32 or 64 bits, signed or
unsigned. Currently GDB recognizes only 32 and 64-bit arguments.
This commit extends this. It also provides a testcase, only for
x86_64 systems.
gdb/
2014-05-02 Sergio Durigan Junior <sergiodj@redhat.com>
* stap-probe.c (enum stap_arg_bitness): New enums to represent 8
and 16-bit signed and unsigned arguments. Update comment.
(stap_parse_probe_arguments): Extend code to handle such
arguments. Use warning instead of complaint to notify about
unrecognized bitness.
gdb/testsuite/
2014-05-02 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.arch/amd64-stap-optional-prefix.S (main): Add several
probes to test for bitness recognition.
* gdb.arch/amd64-stap-optional-prefix.exp
(test_probe_value_without_reg): New procedure.
Add code to test for different kinds of bitness.
This commit fixes PR breakpoints/16889, which is about a bug that
triggers when GDB tries to parse probes whose arguments do not contain
the initial (and optional) "N@" part. For reference sake, the de
facto format is described here:
<https://sourceware.org/systemtap/wiki/UserSpaceProbeImplementation>
Anyway, this PR actually uncovered two bugs (related) that were
happening while parsing the arguments. The first one was that the
parser *was* catching *some* arguments that were missing the "N@"
part, but it wasn't correctly setting the argument's type. This was
causing a NULL pointer being dereferenced, ouch...
The second bug uncovered was that the parser was not catching all of
the cases for a probe which did not provide the "N@" part. The fix
for that was to simplify the check that the code was making to
identify non-prefixed probes. The code is simpler and easier to read
now.
I am also providing a testcase for this bug, only for x86_64
architectures.
gdb/
2014-05-02 Sergio Durigan Junior <sergiodj@redhat.com>
PR breakpoints/16889
* stap-probe.c (stap_parse_probe_arguments): Simplify
check for non-prefixed probes (i.e., probes whose
arguments do not start with "N@"). Always set the
argument type to a sane value.
gdb/testsuite/
2014-05-02 Sergio Durigan Junior <sergiodj@redhat.com>
PR breakpoints/16889
* gdb.arch/amd64-stap-optional-prefix.S: New file.
* gdb.arch/amd64-stap-optional-prefix.exp: Likewise.
* gas/i386/opcode-intel.d: Undo the last change.
* gas/i386/opcode-suffix.d: Likewise.
* gas/i386/opcode.d: Likewise.
* gas/i386/opcode.s: Likewise.
* gas/i386/prefix.s: Add test for fwait with prefix.
* gas/i386/prefix.d: Updated.
sigsetjmp/siglongjmp without saving the signal mask is faster than
setjmp/longjmp on systems where the signal mask is saved. This patch
uses sigsetjmp/siglongjmp without saving the signal mask if possible.
PR binutils/16886
* config.in: Regenerated.
* configure: Likewise.
* configure.in: Check if sigsetjmp is available.
* h8500-dis.c (private): Replace jmp_buf with OPCODES_SIGJMP_BUF.
(fetch_data): Replace longjmp with OPCODES_SIGLONGJMP.
(print_insn_h8500): Replace setjmp with OPCODES_SIGSETJMP.
* i386-dis.c (dis_private): Replace jmp_buf with OPCODES_SIGJMP_BUF.
(fetch_data): Replace longjmp with OPCODES_SIGLONGJMP.
(print_insn): Replace setjmp with OPCODES_SIGSETJMP.
* ns32k-dis.c (private): Replace jmp_buf with OPCODES_SIGJMP_BUF.
(fetch_data): Replace longjmp with OPCODES_SIGLONGJMP.
(print_insn_ns32k): Replace setjmp with OPCODES_SIGSETJMP.
* sysdep.h (OPCODES_SIGJMP_BUF): New macro.
(OPCODES_SIGSETJMP): Likewise.
(OPCODES_SIGLONGJMP): Likewise.
* vax-dis.c (private): Replace jmp_buf with OPCODES_SIGJMP_BUF.
(fetch_data): Replace longjmp with OPCODES_SIGLONGJMP.
(print_insn_vax): Replace setjmp with OPCODES_SIGSETJMP.
* xtensa-dis.c (dis_private): Replace jmp_buf with
OPCODES_SIGJMP_BUF.
(fetch_data): Replace longjmp with OPCODES_SIGLONGJMP.
(print_insn_xtensa): Replace setjmp with OPCODES_SIGSETJMP.
* z8k-dis.c(instr_data_s): Replace jmp_buf with OPCODES_SIGJMP_BUF.
(fetch_data): Replace longjmp with OPCODES_SIGLONGJMP.
(print_insn_z8k): Replace setjmp with OPCODES_SIGSETJMP.
In a test I was writting, I needed a procedure that would connect to
the target, and do "load", or equivalent.
Years ago, boards would override gdb_load to implement that. Then
gdb_reload was added, and gdb_load was relaxed to allow boards avoid
the spawing and connecting to the target. This sped up gdbserver
testing. See
https://www.sourceware.org/ml/gdb-patches/2007-02/msg00318.html.
To actually spawn the target and load the executable on the target
side, gdb_reload was born:
# gdb_reload -- load a file into the target. Called before "running",
# either the first time or after already starting the program once,
# for remote targets. Most files that override gdb_load should now
# override this instead.
proc gdb_reload { } {
# For the benefit of existing configurations, default to gdb_load.
# Specifying no file defaults to the executable currently being
# debugged.
return [gdb_load ""]
}
Note the comment about specifying no file. Indeed looking at
config/sid.exp, or config/monitor.exp, we see examples of that.
However, the default gdb_load itself doesn't handle the case of no
file specified. When passed no file, it just calls gdb_file_cmd with
no file either, which ends up invocing the "file" command with no
argument, which means unloading the file and its symbols... That
means calling gdb_reload when testing against native targets is
broken. We don't see that today because the only call to gdb_reload
that exists today is guarded by target_info exists
gdb,do_reload_on_run.
The native-extended-gdbserver.exp board is likewise broken here. When
[gdb_load ""] is called, the board sets the remote exec-file to "" ...
Tested on x86_64 Fedora 17, native, remote gdbserver and
extended-remote gdbserver.
testsuite/
2014-05-01 Pedro Alves <palves@redhat.com>
* lib/gdb.exp (gdb_load): Extend comment. Skip calling
gdb_file_cmd if no file is specified.
* boards/native-extended-gdbserver.exp (gdb_load): Use the
last_loaded_file to set the remote exec-file.
of address.
(mmo_write_chunk): When handling data remainder, assert that
previous remaining data is flushed.
(mmo_write_loc_chunk): Only look for trailing and leading zeros
when dealing with an aligned VMA and for aligned lengths. Don't skip
the last 32-bit-word of zeros.
(mmo_write_loc_chunk): Emit an error if the VMA is not aligned.
(mmo_scan) <case LOP_QUOTE>: Move re-alignment of vma before
emitting data, not after updating it.
<case LOP_LOC>: Call mmo_decide_section with aligned vma.
When connecting to a remote system, we use the compare-sections
command to verify that the box is running the code that we think it is
running. Since the system is up and running and *NOT* 'freshly
downloaded without yet executing anything', read-write sections, of
course, differ from what they were in the executable file.
Comparing read-write sections takes time and more importantly the
MIS-MATCHED output is confusing to some users.
The compare-sections command compares all loadable sections including
read-write sections. This patch gives the user the option to compare
just the loadable read-only sections.
gdb/
2014-05-01 David Taylor <dtaylor@emc.com>
* remote.c (compare_sections_command): Add -r option to compare
all loadable read-only sections.
gdb/doc/
2014-05-01 David Taylor <dtaylor@emc.com>
* gdb.texinfo (compare-sections): Document the new -r (read-only)
option.
0x9b (fwait) is both an instruction and an opcode prefix. When 0x9b is
treated as an instruction, we need to handle any prefixes before it.
This patch handles it properly.
gas/testsuite/
PR binutils/16891
* gas/i386/opcode.s: Add test for fwait with prefix.
* gas/i386/opcode-intel.d: Updated.
* gas/i386/opcode-suffix.d: Likewise.
* gas/i386/opcode.d: Likewise.
opcodes/
PR binutils/16891
* i386-dis.c (print_insn): Handle prefixes before fwait.
This adds a variant of local-remote-host-notty.exp that forces
pseudo-tty allocation, so that readline/editing is enabled.
$ ssh localhost gdb -q
(gdb) show editing
Editing of command lines as they are typed is off.
(gdb)
vs:
$ ssh -t localhost gdb -q
(gdb) show editing
Editing of command lines as they are typed is on.
We now get, e.g.:
Running ../../../src/gdb/testsuite/gdb.base/filesym.exp ...
PASS: gdb.base/filesym.exp: complete on "filesy"
PASS: gdb.base/filesym.exp: completion list for "filesym"
PASS: gdb.base/filesym.exp: set breakpoint at filesym
gdb/testsuite/
2014-05-01 Pedro Alves <palves@redhat.com>
* boards/local-remote-host.exp: New file.
When testing with this board, stdin is not a tty, and so
readline/editing is disabled:
$ ssh localhost gdb -q
(gdb) show editing
Editing of command lines as they are typed is off.
(gdb)
Rename the file, to make room for a version of this board that forces a pseudo-tty.
gdb/testsuite/
2014-05-01 Pedro Alves <palves@redhat.com>
* boards/local-remote-host.exp: Rename to ...
* boards/local-remote-host-notty.exp: ... this.
thought that an uncompressed .debug_str section was compressed.
* compress.c (bfd_is_section_compressed): When checking the
.debug_str section, also check the fifth byte in the section is
not part of a string.
* binutils-all/debug_str.s: New test.
* binutils-all/debug_str.d: New test control file.
* binutils-all/compress.exp: Run debug_str test.
