bfd/
* config.bfd (powerpcle-*-rtems*): Do not mark as removed.
(arm-*-rtems*): Move to (arm*-*-eabi*).
(i[3-7]86-*-rtems*): Move to (i[3-7]86-*-elf*).
(m68-*-rtems*): Move to (m68*-*-elf*).
ld/
* configure.tgt (arm-*-rtems*): Move to (arm*-*-eabi*).
(bfin-*-rtems*): Move to (bfin*-*-elf*).
(i[3-7]86-*-rtems*): Move to (i[3-7]86*-*-elf*).
(m68*-*-rtems*): Move to (m68*-*-elf*).
(mips*-*-rtems*): Move to (mips*-*-elf*).
(or1k*-*-rtems*): Move to (or1k*-*-elf*).
(powerpc*-*-rtems*): Move to (powerpc*-*-elf*).
(sparc*-*-rtems*): Move to (sparc*-*-elf*).
(sparc64*-*-rtems*): Move to (sparc64*-*-elf*).
Correct a bug in Solaris 2 linker emulation code triggered by a test
introduced with commit 81ff47b3a5 ("PR ld/20828: Fix linker script
symbols wrongly forced local with section GC") and only create implicit
version nodes if versioning is actually introduced with a version script
(or VERSION command) rather than only global vs local symbol visibility
selected, fixing an:
ld: anonymous version tag cannot be combined with other version tags
linker error produced whenever a version script (or VERSION command) is
used that does not assign symbol versions, such as:
{ global: foo; bar; local: *; };
and consequently removing a:
FAIL: PR ld/20828 dynamic symbols with section GC (version script)
test suite failure with the `x86_64-solaris2' target.
ld/
* emultempl/solaris2.em (elf_solaris2_before_allocation): Do not
add implicit version nodes if an anonymous version tag is being
used.
This patch fixes a number of issues with powerpc dynamic relocations.
1) Both ppc and ppc64 were emitting more dynamic symbols and
relocations than necessary, due to not supporting static linker
resolution of tls_index entries for __tls_get_addr_opt. This meant
that any @got@tlsgd or @got@tlsld reloc needed to make their symbols
dynamic and generate dptmod and dtprel relocs for the dynamic linker.
That would have been passable, but what happened was that practically
all @got relocations resulted in their symbols being made dynamic and
dynamic relocations emitted against the GOT entries. (Mostly visible
on ppc32 executables since ppc64 gcc really only uses @got style
relocs for TLS.)
2) The PowerOpen syntax was not supported with __tls_get_addr_opt.
DTPMOD/DTPREL relocs on tls_index TOC entries did not use the trick of
forcing dynamic symbols and relocations so those entries always
resulted in the full __tls_get_addr processing. gcc doesn't use the
PowerOpen syntax for TLS, and normally such code would be optimized to
TLS IE or LE so the impact of missing this support was minimal.
3) In an executable, relocations against GNU indirect functions always
used the value of their PLT stub. While this is correct, it is
better in some cases to use a dynamic relocation. An extra dynamic
relocation can mean that calls via function pointers need not bounce
through the PLT stub at runtime.
The patch also tidies the PLT handling code in ppc32
allocate_dynrelocs. Allocating PLT entries after other dynamic relocs
allows the PLT loop to omit special handling for undefined weak
symbols, and that in turn allows the loop to be simplified.
bfd/
* elf32-ppc.c (ppc_elf_adjust_dynamic_symbol): Merge two cases
where dynamic relocs are preferable. Allow ifunc too.
(ensure_undefweak_dynamic): New function.
(allocate_dynrelocs): Use it here. Move plt handling last and
don't make symbols dynamic, simplifying loop. Only make undef
weak symbols with GOT entries dynamic. Correct condition
for GOT relocs. Handle dynamic relocs on ifuncs. Correct
comments. Remove goto.
(ppc_elf_relocate_section): Correct test for using dynamic
symbol on GOT relocs. Rearrange test for emitting GOT relocs
to suit. Set up explicit tls_index entries and implicit GOT
tls_index entries resolvable at link time for
__tls_get_addr_opt. Simplify test to clear mem for prelink.
* elf64-ppc.c (allocate_got): Correct condition for GOT relocs.
(ensure_undefweak_dynamic): New function.
(allocate_dynrelocs): Use it here. Only make undef weak symbols
with GOT entries dynamic. Remove unnecessary test of
WILL_CALL_FINISH_DYNAMIC_SYMBOL in PLT handling.
(ppc64_elf_relocate_section): Correct test for using dynamic
symbol on GOT relocs. Rearrange test for emitting GOT relocs
to suit. Set up explicit tls_index entries and implicit GOT
tls_index entries resolvable at link time for __tls_get_addr_opt.
Simplify expression to clear mem for prelink.
ld/
* testsuite/ld-powerpc/tlsexe.r: Update for fewer dynamic relocs
and symbols.
* testsuite/ld-powerpc/tlsexe.d: Likewise.
* testsuite/ld-powerpc/tlsexe.g: Likewise.
bfd * elfnn-aarch64.c: Fix relaxations for ILP32 mode.
ld * testsuite/ld-aarch64/aarch64-elf.exp: Run new tests.
* testsuite/ld-aarch64/tls-desc-ie-ilp32.d: New test.
* testsuite/ld-aarch64/tls-relax-all-ilp32.d: New test.
* testsuite/ld-aarch64/tls-relax-gd-le-ilp32.d: New test.
* testsuite/ld-aarch64/tls-relax-gdesc-le-2-ilp32.d: New test.
* testsuite/ld-aarch64/tls-relax-gdesc-le-ilp32.d: New test.
* testsuite/ld-aarch64/tls-relax-ie-le-2-ilp32.d: New test.
* testsuite/ld-aarch64/tls-relax-ie-le-3-ilp32.d: New test.
* testsuite/ld-aarch64/tls-relax-ie-le-ilp32.d: New test.
* testsuite/ld-aarch64/tls-tiny-desc-ie-ilp32.d: New test.
* testsuite/ld-aarch64/tls-tiny-desc-le-ilp32.d: New test.
* testsuite/ld-aarch64/tls-tiny-gd-ie-ilp32.d: New test.
* testsuite/ld-aarch64/tls-tiny-gd-le-ilp32.d: New test.
Complement commit 81ff47b3a5 ("PR ld/20828: Fix linker script symbols
wrongly forced local with section GC") and add `.plt' to the list of
output sections created, fixing:
FAIL: PR ld/20828 dynamic symbols with section GC (auxiliary shared library)
FAIL: PR ld/20828 dynamic symbols with section GC (plain)
FAIL: PR ld/20828 dynamic symbols with section GC (version script)
failures with `riscv32-elf', `riscv32-linux', `riscv64-elf' and
`riscv64-linux' targets caused by LD crashing in the absence of such a
section.
ld/
PR ld/20828
* testsuite/ld-elf/pr20828.ld: Add `.plt'.
Complement commit 81ff47b3a5 ("PR ld/20828: Fix linker script symbols
wrongly forced local with section GC") and remove the leading underscore
from `_fdata' and `_edata' symbols used in tests, fixing a:
FAIL: PR ld/20828 dynamic symbols with section GC (version script)
failure with targets such as: `bfin-elf', `bfin-uclinux', `metag-elf',
`metag-linux' `mn10300-elf', `sh-elf', `sh64-elf', and possibly other
ones, that have `_' set (with `elf_symbol_leading_char') as the leading
character for symbols. As from commit 93252b1cf4 ("bfd/ld: handle ABI
prefixes in version scripts") these targets strip the leading underscore
before applying version script rules, because the (default) syntax for
symbol names is that of the C language rather than their low-level
symbol table encoding.
ld/
PR ld/20828
* testsuite/ld-elf/pr20828.ld: Rename `_fdata' and `_edata' to
`fdata' and `edata' respectively.
* testsuite/ld-elf/pr20828.ver: Adjust accordingly.
* testsuite/ld-elf/pr20828-a.sd: Likewise.
* testsuite/ld-elf/pr20828-b.sd: Likewise.
* testsuite/ld-elf/pr20828-c.sd: Likewise.
Complement commit 81ff47b3a5 ("PR ld/20828: Fix linker script symbols
wrongly forced local with section GC") and make tests check for the
presence of global `_fdata' and `_edata' symbols separately, removing
any dependency on symbol table ordering for tests to succeed and
removing:
FAIL: PR ld/20828 dynamic symbols with section GC (auxiliary shared library)
FAIL: PR ld/20828 dynamic symbols with section GC (plain)
failures with the `x86_64-solaris2' target, which has additional
intervening entries:
Symbol table '.dynsym' contains 6 entries:
Num: Value Size Type Bind Vis Ndx Name
0: 0000000000000000 0 NOTYPE LOCAL DEFAULT UND
1: 0000000000000000 0 NOTYPE GLOBAL DEFAULT 1 _fdata
2: 0000000000000000 0 OBJECT GLOBAL DEFAULT 1 _DYNAMIC
3: 0000000000000000 0 OBJECT GLOBAL DEFAULT ABS _PROCEDURE_LINKAGE_TABLE_
4: 0000000000000000 0 NOTYPE GLOBAL DEFAULT 1 _edata
5: 00000000000001b8 0 OBJECT GLOBAL DEFAULT 4 _GLOBAL_OFFSET_TABLE_
Rename dump pattern files accordingly for consistency.
ld/
PR ld/20828
* testsuite/ld-elf/pr20828-1.sd: Remove test.
* testsuite/ld-elf/pr20828-a.sd: New test.
* testsuite/ld-elf/pr20828-2a.sd: Rename test to...
* testsuite/ld-elf/pr20828-b.sd: ... this.
* testsuite/ld-elf/pr20828-2b.sd: Rename test to...
* testsuite/ld-elf/pr20828-c.sd: ... this.
* testsuite/ld-elf/shared.exp: Adjust accordingly.
ld/
* testsuite/lib/ld-lib.exp (run_ld_link_exec_tests): Append
board_cflags as gcc is used as linker driver.
* testsuite/ld-unique/unique.exp: Likewise
bfd/
* elfnn-aarch64.c (elf_aarch64_hash_symbol): New function.
(elf_backend_hash_symbol): Define.
ld/
* testsuite/ld-aarch64/aarch64-elf.exp (aarch64elflinktests): New tests.
* testsuite/ld-aarch64/func-in-so.s: New test source file.
* testsuite/ld-aarch64/func-sym-hash-opt.s: Likewise.
* testsuite/ld-aarch64/func-sym-hash-opt.d: New expected test result.
When displaying the section headers table using objdump (-h), the column
containing the section header name is currently fixed at 13 characters.
A section name that is longer than 13 characters will overflow the
column causing the table to become miss-aligned.
In this commit I change the behaviour so that _in wide mode_ (-w -h) the
section name column is dynamically resized to fit the longest section
name we plan to display. In wide mode the column still retains a
minimum width of 13 characters.
In non-wide more the behaviour is completely unchanged.
While I was changing the dump_headers function I have unified the two
printf lines that handled the different address widths into a single
printf, the address width is now passed into printf using the '*' field
width format character.
binutils/ChangeLog:
* objdump.c (dump_section_header): Extract max section name length
from data parameter, use this when formatting output.
(find_longest_section_name): New function.
(dump_headers): Calculate longest section name when in wide mode,
reformat to unify printing of header line.
ld/ChangeLog:
* testsuite/ld-elf/eh-frame-hdr.d: Update expected results.
Complement commit 9acc85a62e ("Use dynrelro for symbols in relro
sections too").
ld/
PR ld/20995
* testsuite/ld-elf/elf.exp: Set GAS flags correctly for the
`mips*-*-*' target and `pr20995' and `pr20995-2' tests.
Fix a generic ELF linker regression introduced with a chain of changes
made to unused input section garbage collection:
- commit 1a766c6843 ("Also hide symbols without PLT nor GOT
references."),
<https://sourceware.org/ml/binutils/2011-09/msg00076.html>,
- commit 1d5316ab67 ("PR ld/13177: garbage collector retains zombie
references to external libraries"),
<https://sourceware.org/ml/binutils/2011-10/msg00161.html>,
- commit 6673f753c0 ("Fix PR 12772, garbage collection of dynamic
syms"), <https://sourceware.org/ml/binutils/2011-12/msg00077.html>,
causing the garbage collection of unused symbols present in a DSO
involved in a link to make identically named symbols ordinarily defined
(i.e. not hidden or PROVIDEd) by a linker script local, even though the
latter symbols are supposed to be global as if no DSO defined them as
well.
This is because linker script assignments are processed very late as
`lang_process' proceeds, down in the call to `ldemul_before_allocation',
which is made after the call to `lang_gc_sections' to do input section
garbage collecting. Consequently if unused, then any such DSO-defined
symbol has already been garbage-collected and internally marked local.
It would ordinarily be removed from dynamic symbol table output, however
a linker script assignment correctly replaces its original definition
with the new one and enters it into the dynamic symbol table produced as
it is supposed to be exported. The original local marking is however
retained making the symbol local in the dynamic symbol table and
therefore not available externally. This also causes a sorting problem
with the MIPS target, which does not expect non-section local dynamic
symbols to be output and produces an invalid binary.
Fix the problem then, by removing the `forced_local' marking for the
offending case and add suitable test cases. First to verify that unused
symbols ordinarily defined with linker script assignments remain
exported in the context of input section garbage collection whether or
not a DSO defining identically named symbols is present in the link.
Second that a linker version script still correctly retains or removes
such symbols as requested.
bfd/
PR ld/20828
* elflink.c (bfd_elf_record_link_assignment): Clear any
`forced_local' marking for DSO symbols that are not being
provided.
ld/
PR ld/20828
* testsuite/ld-elf/pr20828-1.sd: New test.
* testsuite/ld-elf/pr20828-2a.sd: New test.
* testsuite/ld-elf/pr20828-2b.sd: New test.
* testsuite/ld-elf/pr20828.ld: New test linker script.
* testsuite/ld-elf/pr20828.ver: New test version script.
* testsuite/ld-elf/pr20828.s: New test source.
* testsuite/ld-elf/shared.exp: Run the new test.
Correct a regression from commit 8614eeee67 ("Traditional MIPS
patches"), <https://sourceware.org/ml/binutils/2000-07/msg00018.html>,
which caused symbols in linkonce or what is these days known as comdat
sections to be treated as external for the purpose of PIC relocation
generation even if their binding remains STB_LOCAL. This in turn
disabled GOT16/LO16 relocation pairing with references to such symbols,
as no complementing LO16 relocation is expected for external GOT16
references in the o32 ABI, which ultimately leads to link errors, e.g.:
ld: comdat-reloc.o: Can't find matching LO16 reloc against `foo' for R_MIPS_GOT16 at 0x24 in section `.text.bar[bar]'
as with the LD test case included with this change.
Revert the special case for symbols in comdat sections then, making code
actually match `adjust_reloc_syms' as indicated in its explanatory
comment, and adjust calling code accordingly. Also bring back the
corresponding description of what now is `s_is_linkonce', lost with
commit 5f0fe04bc5 ("Improved MIPS16/MIPS32 code intermixing for
gas."), <https://www.sourceware.org/ml/binutils/2006-07/msg00039.html>.
gas/
PR gas/20649
* config/tc-mips.c (pic_need_relax): Don't check for linkonce
symbols, remove the `segtype' parameter.
(mips_frob_file, md_estimate_size_before_relax): Adjust
accordingly.
(s_is_linkonce): Add an explanatory comment.
* testsuite/gas/mips/comdat-reloc.d: New test.
* testsuite/gas/mips/comdat-reloc.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new test.
ld/
PR gas/20649
* testsuite/ld-mips-elf/mips-elf.exp: Add PIC comdat GOT16/LO16
relocation pairing link test.
Also generate unwind info for the .plt.bnd section. Sine it is the same
as unwind info for the .plt.got section, we use unwind info for the
.plt.got section to cover the the .plt.bnd section.
bfd/
PR ld/21038
* elf64-x86-64.c (elf_x86_64_link_hash_table): Add
plt_bnd_eh_frame.
(elf_x86_64_check_relocs): Create .eh_frame section for the
.plt.bnd section.
(elf_x86_64_size_dynamic_sections): Allocate and initialize
.eh_frame section for the .plt.bnd section.
(elf_x86_64_finish_dynamic_sections): Adjust .eh_frame section
for the .plt.bnd section.
ld/
PR ld/21038
* testsuite/ld-x86-64/pr21038b.d: Updated.
* testsuite/ld-x86-64/pr21038c.d: New file.
* testsuite/ld-x86-64/pr21038c.s: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run pr21038c.
bfd * config.bfd: Add entries for i686-redox and x86_64-redox.
gas * configure.tgt: Add entry for i386-redox.
ld * configure.tgt: Add entries for x86-redox and x86_64-redox.
This patch places .plt.got section after .plt section for x32.
* emulparams/elf32_x86_64.sh (TINY_READONLY_SECTION): New.
* testsuite/ld-x86-64/pr20830.d: Renamed to ...
* testsuite/ld-x86-64/pr20830a.d: This. Updated.
* testsuite/ld-x86-64/pr20830b.d: New file.
* testsuite/ld-x86-64/x86-64.exp: Rename pr20830 to pr20830a.
Run pr20830b.
When there are both PLT and GOT references to the same function symbol,
linker combines GOTPLT and GOT slots into a single GOT slot and create
an entry in .plt.got section for PLT access via the GOT slot. This
patch adds unwind info for .plt.got section.
bfd/
PR ld/20830
* elf32-i386.c (elf_i386_eh_frame_plt_got): New.
(PLT_GOT_FDE_LENGTH): Likewise.
(elf_i386_plt_layout): Add eh_frame_plt_got and
eh_frame_plt_got_size.
(elf_i386_plt): Updated.
(elf_i386_link_hash_table): Add plt_got_eh_frame.
(elf_i386_check_relocs): Create .eh_frame section for .plt.got.
(elf_i386_size_dynamic_sections): Allocate and initialize
.eh_frame section for .plt.got.
(elf_i386_finish_dynamic_sections): Adjust .eh_frame section for
.plt.got.
(elf_i386_nacl_plt): Add FIXME for eh_frame_plt_got and
eh_frame_plt_got_size.
* elf64-x86-64.c (elf_x86_64_eh_frame_plt_got): New.
(PLT_GOT_FDE_LENGTH): Likewise.
(elf_x86_64_backend_data): Add eh_frame_plt_got and
eh_frame_plt_got_size.
(elf_x86_64_arch_bed): Updated.
(elf_x86_64_bnd_arch_bed): Add FIXME for eh_frame_plt_got and
eh_frame_plt_got_size.
(elf_x86_64_nacl_arch_bed): Likewise.
(elf_x86_64_link_hash_table): Add plt_got_eh_frame.
(elf_x86_64_check_relocs): Create .eh_frame section for .plt.got.
(elf_x86_64_size_dynamic_sections): Allocate and initialize
.eh_frame section for .plt.got.
(elf_x86_64_finish_dynamic_sections): Adjust .eh_frame section
for .plt.got.
ld/
PR ld/20830
* testsuite/ld-i386/i386.exp: Run pr20830.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-i386/pr20830.d: New file.
* testsuite/ld-i386/pr20830.s: Likewise.
* testsuite/ld-x86-64/pr20830.d: Likewise.
* testsuite/ld-x86-64/pr20830.s: Likewise.
Since linker tests were changed to use $CC, instead of $LD, we need
to pass -Wl,-R,tmpdir and -Wl,--as-needed to $CC.
* testsuite/ld-i386/i386.exp: Pass -Wl,-R,tmpdir to GCC driver.
* testsuite/ld-i386/tls.exp: Likewise.
The arc700 nps variant uses some specific named sections to
facilitate its CMEM based instructions, which operate on memory
regions fixed at specific addresses.
This commit adds the arclinux_nps emulation, which is based on the
arclinux emulation. The new emulation uses the OTHER_SECTIONS
variable in the emulation parameters script to provide symbols
mapping to various locations in the CMEM space on nps.
The accompanying test ensures that all symbols are provided at the
correct address in the linker script.
ld/ChangeLog:
* Makefile.am: Add earclinux_nps.c target and add to
ALL_EMULATION_SOURCES.
* Makefile.in: Likewise, regenerated.
* configure.tgt: Add arclinux_nps as an extra emulation for
arc*-*-elf* and arc*-*-linux*.
* emulparams/arc-nps.sh: New file.
* emulparams/arclinux_nps.sh: New file.
* testsuite/ld-arc/arclinux-nps.d,
* testsuite/ld-arc/arclinux-nps.s: New test.
This was added so compressed loads could have smaller offsets for
accessing the data section, but the result was that writable sections
ended up in INITIAL_READONLY_SECTIONS. This is a bad idea. The fix is
to just remove this micro-optimization.
Thanks to Alan Morda for finding the problem!
ld/ChangeLog
2017-01-09 Palmer Dabbelt <palmer@dabbelt.com>
Kito Cheng <kito.cheng@gmail.com>
* emulparams/elf32lriscv-defs.sh (INITIAL_READONLY_SECTIONS):
Removed.
(SDATA_START_SYMBOLS): Likewise.
I noticed that PRU LD is broken when BFD is configured
with --enable-targets=all. This patch fixes it, and takes the
opportunity to clean the epruelf.c dependencies.
* Makefile.am (ALL_EMULATION_SOURCES): Add epruelf.c.
(epruelf.c): Remove unneeded dependencies.
* Makefile.in: Regenerate
Signed-off-by: Dimitar Dimitrov <dimitar@dinux.eu>
Needed for cross-builds without --sysroot, where USE_LIBPATH isn't
set. See elf32.em after_open. Perhap ld ought to look at -rpath in
this case?
* testsuite/ld-elf/shared.exp: Add -rpath-link and -no-as-needed
to various tests.
* testsuite/ld-elfweak/elfweak.exp: Likewise.
* testsuite/ld-elfvers/vers.exp (vers19): Fix -rpath-link option.
Removing the [isnative] check requires that we test for a C compiler.
* testsuite/ld-elf/elf.exp: Check that $CC exists before C tests.
* testsuite/ld-pie/pie.exp: Likewise.
* testsuite/ld-plugin/lto.exp: Likewise.
Many of the ld tests are not run for cross builds, in some cases
because the test needs to run a newly linked executable, and in others
simply because it was easier to write the test for native only. Even
when a test needs to run, it's good to compile and link to exercise
the linker. So that's what this patch does. I've also rid us of
the old ld_link procedure with all the HOSTING_CRT0 etc. setup. It's
much simpler to just link with $CC.
This does mean that a cross build with cross-compiler installed but
no cross C-library will give lots of failures. If that turns out to
be too annoying, I guess we can write a tcl procedure to detect it and
not run all the extra tests.
* Makefile.am (bootstrap): Delete rule.
(ld-partial, ld1, ld1-full, ld2, ld3): Likewise.
(HOSTING_CRT0, HOSTING_SCRT0): Don't define.
(HOSTING_LIBS, HOSTING_SLIBS, HOSTING_EMU): Likewise.
* configure.ac (HOSTING_CRT0, HOSTING_SCRT0): Don't define.
(HOSTING_LIBS, HOSTING_SLIBS): Likewise.
* configure.host (HOSTING_CRT0, HOSTING_LIBS): Don't define.
* Makefile.in: Regenerate.
* configure: Regenerate.
* testsuite/config/default.exp (get_link_files): Delete.
(HOSTING_CRT0, HOSTING_SCRT0, HOSTING_LIBS, HOSTING_SLIBS): Don't
define.
(ld_simple_link): Delete.
* testsuite/lib/ld-lib.exp (default_ld_link): Delete
(default_ld_simple_link): Rename to default_ld_link.
(ld_simple_link_defsyms): Rename to ld_link_defsyms.
(run_ld_link_tests): Use ld_link, not ld_simple_link.
(run_cc_link_tests): Likewise.
(run_ld_link_exec_tests): Use $CC or $CXX to link, not $ld.
Don't run exe when not native, and return unsupported.
* testsuite/ld-bootstrap/bootstrap.exp: Create gccld1 etc. dirs.
Link ld1 etc. using $CC.
* testsuite/ld-cdtest/cdtest.exp: Link cdtest using $CC.
* testsuite/ld-checks/checks.exp: Use ld_link, not ld_simple_link.
* testsuite/ld-cygwin/exe-export.exp: Likewise.
* testsuite/ld-elf/binutils.exp: Likewise.
* testsuite/ld-elf/eh-group.exp: Likewise.
* testsuite/ld-elf/exclude.exp: Likewise.
* testsuite/ld-elf/frame.exp: Likewise.
* testsuite/ld-elf/sec-to-seg.exp: Likewise.
* testsuite/ld-elf/tls_common.exp: Likewise.
* testsuite/ld-elfcomm/elfcomm.exp: Likewise.
* testsuite/ld-fastcall/fastcall.exp: Likewise.
* testsuite/ld-gc/gc.exp: Likewise.
* testsuite/ld-ifunc/binutils.exp: Likewise.
* testsuite/ld-mep/mep.exp: Likewise.
* testsuite/ld-mips-elf/mips-elf-flags.exp: Likewise.
* testsuite/ld-mn10300/mn10300.exp: Likewise.
* testsuite/ld-nios2/nios2.exp: Likewise.
* testsuite/ld-pe/pe-compile.exp: Likewise.
* testsuite/ld-pe/pe-run.exp: Likewise.
* testsuite/ld-pe/pe-run2.exp: Likewise.
* testsuite/ld-plugin/plugin.exp: Likewise.
* testsuite/ld-scripts/align.exp: Likewise.
* testsuite/ld-scripts/alignof.exp: Likewise.
* testsuite/ld-scripts/assert.exp: Likewise.
* testsuite/ld-scripts/defined.exp: Likewise.
* testsuite/ld-scripts/extern.exp: Likewise.
* testsuite/ld-scripts/log2.exp: Likewise.
* testsuite/ld-scripts/map-address.exp: Likewise.
* testsuite/ld-scripts/phdrs.exp: Likewise.
* testsuite/ld-scripts/phdrs2.exp: Likewise.
* testsuite/ld-scripts/script.exp: Likewise.
* testsuite/ld-scripts/section-flags.exp: Likewise.
* testsuite/ld-scripts/sizeof.exp: Likewise.
* testsuite/ld-scripts/sysroot-prefix.exp: Likewise.
* testsuite/ld-scripts/weak.exp: Likewise.
* testsuite/ld-selective/selective.exp: Likewise.
* testsuite/ld-sh/sh.exp: Likewise.
* testsuite/ld-sh/sh64/relax.exp: Likewise.
* testsuite/ld-sh/sh64/relfail.exp: Likewise.
* testsuite/ld-srec/srec.exp: Likewise.
* testsuite/ld-tic6x/tic6x.exp: Likewise.
* testsuite/ld-undefined/weak-undef.exp: Likewise.
* testsuite/ld-versados/versados.exp: Likewise.
* testsuite/ld-x86-64/dwarfreloc.exp: Likewise.
* testsuite/ld-xtensa/coalesce.exp: Likewise.
* testsuite/ld-xtensa/diff_overflow.exp: Likewise.
* testsuite/ld-xtensa/lcall.exp: Likewise.
* testsuite/ld-elf/audit.exp: Run non-native too.
* testsuite/ld-elf/compress.exp: Likewise. Replace ld options with
gcc -Wl, options.
* testsuite/ld-elf/dwarf.exp: Run non-native too. Use ld_link,
not ld_simple_link. Add -Wl,--no-as-needed to some tests.
* testsuite/ld-elf/elf.exp: Run non-native too. Formatting.
* testsuite/ld-elf/indirect.exp: Run non-native too. Add
-Wl,--no-as-needed to most tests.
* testsuite/ld-elf/shared.exp: Run non-native too. Use braces
to simplify quoting. Set run_tests using [list] rather than
brace assignment to expand $extralibs. Add -Wl,--no-as-needed
to many test. Prefix ld options with -Wl,.
(mix_pic_and_non_pic): Don't run exe if not native.
* testsuite/ld-elf/wrap.exp: Run non-native too. Add
-Wl,--no-as-needed and prefix ld options with -Wl,.
* testsuite/ld-elfvers/vers.exp: Run non-native too. Use ld_link,
not ld_simple_link.
* testsuite/ld-elfvsb/elfvsb.exp: Likewise.
(visibility_test): Don't run exe if not native.
* testsuite/ld-elfweak/elfweak.exp: Run non-native too. Use ld_link,
not ld_simple_link.
(build_exec): Don't run exe if not native.
* testsuite/ld-ifunc/ifunc.exp: Run non-native too. Use ld_link,
not ld_simple_link. Link using $CC. Add -Wl,--no-as-needed
to some tests and prefix ld options with -Wl,. Expect GNU
for hppa-linux even when no ifuncs. Delete cleanup.
* testsuite/ld-pie/pie.exp: Run non-native too.
* testsuite/ld-plugin/lto.exp: Likewise.
* testsuite/ld-shared/shared.exp: Likewise. Use ld_link,
not ld_simple_link.
(shared_test): Don't run exe if not native.
* testsuite/ld-size/size.exp: Run non-native too. Add
-Wl,--no-as-needed to some tests. Prefix ld options with -Wl,.
* testsuite/ld-unique/unique.exp: Run non-native too. Use ld_link,
not ld_simple_link. Link using $CC. Add -Wl,--no-as-needed
to some tests and prefix ld options with -Wl,. Expect GNU
for hppa-linux even when no unique syms. Delete cleanup.
* testsuite/ld-x86-64/tls.exp: Add -Wl,--no-as-needed to some
tests and prefix ld options with -Wl,.
* testsuite/ld-x86-64/x86-64.exp: Use ld_link, not ld_simple_link.
Add -Wl,--no-as-needed to some tests. Prefix ld options with -Wl,.
Leading dashes from an LD error message confuse send_log, because the
string is taken to be an option.
This patch fixes the following DejaGnu error:
--defsym:1: undefined symbol `foo2' referenced in expression
failed with: <--defsym:1: undefined symbol `foo2' referenced in expression>, no expected output
ERROR: tcl error sourcing .../ld/testsuite/ld-gc/gc.exp.
ERROR: usage: send [args] string
while executing
"send_log "$comp_output\n""
(procedure "run_dump_test" line 376)
* testsuite/lib/ld-lib.exp (run_dump_test): Pass -- to send_log.
Signed-off-by: Dimitar Dimitrov <dimitar@dinux.eu>
PR ld/20995
bfd/
* elflink.c (elf_link_add_object_symbols): Mark relro sections
in dynamic objects SEC_READONLY.
ld/
* testsuite/ld-elf/pr20995c.s: New test file.
* testsuite/ld-elf/pr20995-2so.r: Likewise.
* testsuite/ld-elf/elf.exp: Run it.
Variables defined in shared libraries are copied into an executable's
.bss section when code in the executable is non-PIC and thus would
require dynamic text relocations to access the variable directly in
the shared library. Recent x86 toolchains also copy variables into
the executable to gain a small speed improvement.
The problem is that if the variable was originally read-only, the copy
in .bss is writable, potentially opening a security hole. This patch
cures that problem by putting the copy in a section that becomes
read-only after ld.so relocation, provided -z relro is in force.
The patch also fixes a microblaze linker segfault on attempting to
use dynamic bss variables.
bfd/
PR ld/20995
* elf-bfd.h (struct elf_link_hash_table): Add sdynrelro and
sreldynrelro.
(struct elf_backend_data): Add want_dynrelro.
* elfxx-target.h (elf_backend_want_dynrelro): Define.
(elfNN_bed): Update initializer.
* elflink.c (_bfd_elf_create_dynamic_sections): Create
sdynrelro and sreldynrelro sections.
* elf32-arm.c (elf32_arm_adjust_dynamic_symbol): Place variables
copied into the executable from read-only sections into sdynrelro.
(elf32_arm_size_dynamic_sections): Handle sdynrelro.
(elf32_arm_finish_dynamic_symbol): Select sreldynrelro for
dynamic relocs in sdynrelro.
(elf_backend_want_dynrelro): Define.
* elf32-hppa.c (elf32_hppa_adjust_dynamic_symbol)
(elf32_hppa_size_dynamic_sections, elf32_hppa_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elf32-i386.c (elf_i386_adjust_dynamic_symbol)
(elf_i386_size_dynamic_sections, elf_i386_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elf32-metag.c (elf_metag_adjust_dynamic_symbol)
(elf_metag_size_dynamic_sections, elf_metag_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elf32-microblaze.c (microblaze_elf_adjust_dynamic_symbol)
(microblaze_elf_size_dynamic_sections)
(microblaze_elf_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elf32-nios2.c (nios2_elf32_finish_dynamic_symbol)
(nios2_elf32_adjust_dynamic_symbol)
(nios2_elf32_size_dynamic_sections)
(elf_backend_want_dynrelro): As above.
* elf32-or1k.c (or1k_elf_finish_dynamic_symbol)
(or1k_elf_adjust_dynamic_symbol, or1k_elf_size_dynamic_sections)
(elf_backend_want_dynrelro): As above.
* elf32-ppc.c (ppc_elf_adjust_dynamic_symbol)
(ppc_elf_size_dynamic_sections, ppc_elf_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elf32-s390.c (elf_s390_adjust_dynamic_symbol)
(elf_s390_size_dynamic_sections, elf_s390_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elf32-tic6x.c (elf32_tic6x_adjust_dynamic_symbol)
(elf32_tic6x_size_dynamic_sections)
(elf32_tic6x_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elf32-tilepro.c (tilepro_elf_adjust_dynamic_symbol)
(tilepro_elf_size_dynamic_sections)
(tilepro_elf_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elf64-ppc.c (ppc64_elf_adjust_dynamic_symbol)
(ppc64_elf_size_dynamic_sections, ppc64_elf_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elf64-s390.c (elf_s390_adjust_dynamic_symbol)
(elf_s390_size_dynamic_sections, elf_s390_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elf64-x86-64.c (elf_x86_64_adjust_dynamic_symbol)
(elf_x86_64_size_dynamic_sections)
(elf_x86_64_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elfnn-aarch64.c (elfNN_aarch64_adjust_dynamic_symbol)
(elfNN_aarch64_size_dynamic_sections)
(elfNN_aarch64_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elfnn-riscv.c (riscv_elf_adjust_dynamic_symbol)
(riscv_elf_size_dynamic_sections, riscv_elf_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elfxx-mips.c (_bfd_mips_elf_adjust_dynamic_symbol)
(_bfd_mips_elf_size_dynamic_sections)
(_bfd_mips_vxworks_finish_dynamic_symbol): As above.
* elfxx-sparc.c (_bfd_sparc_elf_adjust_dynamic_symbol)
(_bfd_sparc_elf_size_dynamic_sections)
(_bfd_sparc_elf_finish_dynamic_symbol): As above.
* elfxx-tilegx.c (tilegx_elf_adjust_dynamic_symbol)
(tilegx_elf_size_dynamic_sections)
(tilegx_elf_finish_dynamic_symbol): As above.
* elf32-mips.c (elf_backend_want_dynrelro): Define.
* elf64-mips.c (elf_backend_want_dynrelro): Define.
* elf32-sparc.c (elf_backend_want_dynrelro): Define.
* elf64-sparc.c (elf_backend_want_dynrelro): Define.
* elf32-tilegx.c (elf_backend_want_dynrelro): Define.
* elf64-tilegx.c (elf_backend_want_dynrelro): Define.
* elf32-microblaze.c (microblaze_elf_adjust_dynamic_symbol): Tidy.
(microblaze_elf_size_dynamic_sections): Handle sdynbss.
* elf32-nios2.c (nios2_elf32_size_dynamic_sections): Make use
of linker shortcuts to dynamic sections rather than comparing
names. Correctly set "got" flag.
ld/
PR ld/20995
* testsuite/ld-arm/farcall-mixed-app-v5.d: Update to suit changed
stub hash table traversal caused by section id increment. Accept
the previous output too.
* testsuite/ld-arm/farcall-mixed-app.d: Likewise.
* testsuite/ld-arm/farcall-mixed-lib-v4t.d: Likewise.
* testsuite/ld-arm/farcall-mixed-lib.d: Likewise.
* testsuite/ld-elf/pr20995a.s, * testsuite/ld-elf/pr20995b.s,
* testsuite/ld-elf/pr20995.r: New test.
* testsuite/ld-elf/elf.exp: Run it.
The only target that renames .bss is tic6x, turning .bss into .far,
and .sbss into .bss. .dynbss is not renamed to .dynfar by BFD.
* scripttempl/elf.sc: Don't use $BSS_NAME in .dynbss.
We don't want to report a test failure as a tcl error.
* testsuite/ld-scripts/sysroot-prefix.exp (sysroot_prefix_test_setup):
Call perror rather than error on "as" or "ar" failures.
