When running a 32-bit ARM inferior with a 32-bit ARM GDB on a 64-bit
AArch64 host, only VFP registers (NT_ARM_VFP) are available. The FPA
registers (NT_PRFPREG) are not available so GDB must not request them, as
this will fail with -EINVAL. This is most noticeably exposed when running
"generate-core-file":
(gdb) generate-core-file myprog.core
Unable to fetch the floating point registers.: Invalid argument.
ptrace(PTRACE_GETREGSET, 27642, NT_FPREGSET, 0xffcc67f0) = -1 EINVAL (Invalid argument)
gdb/ChangeLog:
2017-01-27 Kees Cook <keescook@google.com>
* gdb/arm-linux-nat.c (arm_linux_fetch_inferior_registers): Call
fetch_fpregs if target has fpa registers.
(arm_linux_store_inferior_registers): Call store_fpregs if target
has fpa registers.
With my debug build of Python (--with-pydebug), many tests fails because
of the same issue. Python scripts are loaded by the tests using this
pattern:
(gdb) python exec (open ('file.py').read ())
This causes Python to output this warning:
__main__:1: ResourceWarning: unclosed file <_io.TextIOWrapper name='file.py' mode='r' encoding='ANSI_X3.4-1968'>
and the test to fail because of that extra output. Instead of using the
open + read + exec trick which leaks the file and causes the warning,
why not just source the files?
(gdb) source file.py
This patch changes this, and standardizes the test names of the tests I
touched to "load python file" (some of them were empty, others were
overly complicated).
gdb/testsuite/ChangeLog:
* gdb.python/py-bad-printers.exp: Load python file using "source".
* gdb.python/py-events.exp: Likewise.
* gdb.python/py-evsignal.exp: Likewise.
* gdb.python/py-evthreads.exp: Likewise.
* gdb.python/py-frame-args.exp: Likewise.
* gdb.python/py-framefilter-invalidarg.exp: Likewise.
* gdb.python/py-framefilter-mi.exp: Likewise.
* gdb.python/py-framefilter.exp: Likewise.
* gdb.python/py-mi.exp: Likewise.
* gdb.python/py-pp-maint.exp: Likewise.
* gdb.python/py-pp-registration.exp: Likewise.
* gdb.python/py-prettyprint.exp: Likewise.
(run_lang_tests): Likewise.
* gdb.python/py-typeprint.exp: Likewise.
Exercising aarch64-elf with a custom debug stub i noticed a few failures in
both gdb.base/breakpoint-in-ro-region.exp and gdb.base/memattr.exp:
FAIL: gdb.base/breakpoint-in-ro-region.exp: create read-only mem region covering main
FAIL: gdb.base/breakpoint-in-ro-region.exp: writing to read-only memory fails
FAIL: gdb.base/breakpoint-in-ro-region.exp: inserting software breakpoint in read-only memory fails
FAIL: gdb.base/memattr.exp: create mem region 1
FAIL: gdb.base/memattr.exp: create mem region 2
FAIL: gdb.base/memattr.exp: create mem region 3
FAIL: gdb.base/memattr.exp: create mem region 4
FAIL: gdb.base/memattr.exp: create mem region 5
FAIL: gdb.base/memattr.exp: info mem (1)
FAIL: gdb.base/memattr.exp: mem1 cannot be read
FAIL: gdb.base/memattr.exp: mem2 cannot be written
FAIL: gdb.base/memattr.exp: mem2 can be read
FAIL: gdb.base/memattr.exp: disable mem 1
FAIL: gdb.base/memattr.exp: mem 1 was disabled
FAIL: gdb.base/memattr.exp: enable mem 1
FAIL: gdb.base/memattr.exp: mem 1 was enabled
FAIL: gdb.base/memattr.exp: disable mem 2 4
FAIL: gdb.base/memattr.exp: mem 2 and 4 were disabled
FAIL: gdb.base/memattr.exp: enable mem 2-4
FAIL: gdb.base/memattr.exp: mem 2-4 were enabled
FAIL: gdb.base/memattr.exp: mem 1 to 5 were disabled
FAIL: gdb.base/memattr.exp: mem 1 to 5 were enabled
FAIL: gdb.base/memattr.exp: delete mem 1
FAIL: gdb.base/memattr.exp: mem 1 was deleted
FAIL: gdb.base/memattr.exp: delete mem 2 4
FAIL: gdb.base/memattr.exp: mem 2 and 4 were deleted
FAIL: gdb.base/memattr.exp: mem 2-4 were deleted
These failures don't show up with gdbserver or native gdb on Linux because
they don't export any memory maps, therefore the vector of memory regions is
empty.
Outside of that scenario, we can't guarantee the absence of memory regions
reported by the target upon a connection. In our particular target, we
provide a memory map and the memory regions vector ceases to be empty.
With a non-empty memory regions vector, manipulating memory regions will cause
gdb to be more verbose and output text. For example:
memattr.c:require_user_regions
/* Otherwise, let the user know how to get back. */
if (from_tty)
warning (_("Switching to manual control of memory regions; use "
"\"mem auto\" to fetch regions from the target again."));
memattr.c:create_mem_region
if ((lo >= n->lo && (lo < n->hi || n->hi == 0))
|| (hi > n->lo && (hi <= n->hi || n->hi == 0))
|| (lo <= n->lo && ((hi >= n->hi && n->hi != 0) || hi == 0)))
{
printf_unfiltered (_("overlapping memory region\n"));
return;
}
In my particular case i got both of the above messages.
In order to fix this, i've moved the delete_memory proc from
gdb.base/memattr.exp to a new file lib/memory.exp and made lib/gdb.exp
load that file.
For both gdb.base/breakpoint-in-ro-region.exp and gdb.base/memattr.exp the
patch clears all existing memory regions after running to main. That way we
are guaranteed to have a clean state for memory regions so the tests can
exercise whatever they want and have an expected output pattern.
Regression checked on x86-64/Ubuntu 16.04.
gdb/testsuite/ChangeLog:
2017-01-26 Luis Machado <lgustavo@codesourcery.com>
* lib/memory.exp: New file.
* lib/gdb.exp: Load memory.exp.
* gdb.base/memattr.exp (delete_memory): Move proc to
lib/memory.exp and rename to delete_memory_regions.
Replace delete_memory with delete_memory_regions.
Cleanup memory regions before tests.
* gdb.base/breakpoint-in-ro-region.exp: Cleanup memory regions
before tests.
The all-architectures-1.exp test case currently yields 66 FAILs on s390x,
because the "set architecture" command fails each time when attempting to
switch to "cris", "crisv32", or "cris:common_v10_v32". Actually, the
command would succeed if the endianness had been set to "little" before.
Instead, the test case sets the endianness to "auto", which results in
"big" on s390x.
So on x86_64:
(gdb) set endian auto
The target endianness is set automatically (currently little endian)
(gdb) set architecture cris
warning: A handler for the OS ABI "AIX" is not built into this configuration
of GDB. Attempting to continue with the default cris settings.
The target architecture is assumed to be cris
But on s390x:
(gdb) set endian auto
The target endianness is set automatically (currently big endian)
(gdb) set architecture cris
Architecture `cris' not recognized.
See also the test results for s390x and ppc64be:
https://sourceware.org/ml/gdb-testers/2016-q4/msg05150.htmlhttps://sourceware.org/ml/gdb-testers/2016-q4/msg05713.html
Indeed, cris_gdbarch_init in cris-tdep.c returns a failure unless the
user-specified endianness is "little". Other architectures usually ignore
the user-specified endianness and return a valid gdbarch anyhow, even if
they can not really cope with the given endianness.
This patch removes the check in cris-tdep.c and forces little-endian byte
order instead.
gdb/ChangeLog:
* cris-tdep.c (cris_gdbarch_init): Remove check for
info.byte_order and force it to BFD_ENDIAN_LITTLE.
Changes in v2:
- Renamed arch-specific files to insn-reverse-<arch>.c.
- Adjusted according to reviews.
This patch prepares things for an upcoming testcase for record/replay support
on x86. As is, gdb.reverse/insn-reverse.c is divided into sections guarded by
a few #if blocks, and right now it only handles arm/aarch64.
If we move forward with requiring more tests for record/replay on different
architectures, i think this has the potential to become cluttered with a lot
of differing arch-specific code in the same file.
I've broken up the main file into other files with arch-specific bits
(insn-reverse-<arch>.c). The main file will hold the generic pieces that will
take care of calling the tests.
The arch-specific c files are then included at the top of the generic c file.
I've also added a generic initialize function since we need to run pre-test
checks on x86 to make sure the rdrand/rdseed instructions are supported,
otherwise we will run into a SIGILL.
The arch-specific files will implement their own initialize function with
whatever makes sense. Right now the aarch64 and arm files have an empty
initialization function.
Does this look reasonable?
gdb/testsuite/ChangeLog:
2017-01-26 Luis Machado <lgustavo@codesourcery.com>
* gdb.reverse/insn-reverse.c: Move arm and aarch64 code to their own
files.
(initialize): New function conditionally defined.
(testcases): Move within conditional block.
(main): Call initialize.
* gdb.reverse/insn-reverse-aarch64.c: New file, based on aarch64 bits
of gdb.reverse/insn-reverse.c.
* gdb.reverse/insn-reverse-arm.c: New file, based on arm bits of
gdb.reverse/insn-reverse.c.
When loading a core without an executable like so:
$ gdb --core core
for example often the gdbarch won't contain the
iterate_over_regset_sections method. For example on ARM.
This will generate a call to get_core_register_section with a NULL regset
like at corelow.c:628
get_core_register_section (regcache, NULL, ".reg", 0, 0, "general-purpose", 1);
However a check for REGSET_VARIABLE_SIZE in get_core_register_section
assumes that regset is != NULL thus leading to a crash with this backtrace:
(gdb) bt
#0 0x000000000065907b in get_core_register_section
(regcache=regcache@entry=0x2c26260, regset=regset@entry=0x0,
name=name@entry=0xdbf7b2 ".reg", min_size=min_size@entry=0,
which=which@entry=0, human_name=human_name@entry=0xdbac28
"general-purpose", required=1)
at ../../gdb/corelow.c:542
#1 0x0000000000659b70 in get_core_registers (ops=<optimized out>,
regcache=0x2c26260, regno=<optimized out>) at ../../gdb/corelow.c:628
#2 0x000000000076e5fb in target_fetch_registers
(regcache=regcache@entry=0x2c26260, regno=regno@entry=15)
at ../../gdb/target.c:3590
Note that commit: f962539ad2 ("Warn if core file register
section is larger than expected") introduced this issue.
Thus releases > 7.8.2 are affected.
Also, this would have been caught by gdb.base/corefile.exp but the
problem is that this triggers only if the core dump is missing some data
so that it's not recognized as a linux core dump, or it's not a linux core
dump and the core file register section is larger than expected.
So if you just create a core and read it on linux with ARM the osabi is
detected properly and iterate_over_regset_sections is present and so the
problem is not triggered.
Thus creating a linux test for this with a crafted core that meets the
problem requirements is non-trivial.
This patch fixes this crash by adding a check for regset existence before
running the condition.
gdb/ChangeLog:
* corelow.c (get_core_register_section): Check for regset
existence before checking for REGSET_VARIABLE_SIZE.
Hi,
GDB calls some APIs from opcodes to do disassembly and provide some
call backs. This model makes troubles on C++ exception unwinding,
because GDB is a C++ program, and opcodes is still compiled as C.
As we can see, frame #10 and #12 are C++, while #frame 11 is C,
#10 0x0000000000544228 in memory_error (err=TARGET_XFER_E_IO, memaddr=<optimized out>) at ../../binutils-gdb/gdb/corefile.c:237
#11 0x00000000006b0a54 in print_insn_aarch64 (pc=0, info=0xffffffffeeb0) at ../../binutils-gdb/opcodes/aarch64-dis.c:3185
#12 0x0000000000553590 in gdb_pretty_print_insn (gdbarch=gdbarch@entry=0xbbceb0, uiout=uiout@entry=0xbc73d0, di=di@entry=0xffffffffeeb0,
insn=0xffffffffed40, insn@entry=0xffffffffed90, flags=flags@entry=0,
C++ exception unwinder can't go across frame #11 unless it has
unwind table. However, C program on many architectures doesn't
have it in default. As a result, GDB aborts, which is described
in PR 20939.
This is not the first time we see this kind of problem. We've
had a commit 89525768cd
"Propagate GDB/C++ exceptions across readline using sj/lj-based TRY/CATCH".
We can fix the disassembly bug in a similar way, this is the option one.
Since opcodes is built with gdb, we fix this problem in a different
way as we did for the same issue with readline. Instead of throwing
exception in dis_asm_memory_error, we record the failed memory
address, and throw exception when GDB returns from opcodes disassemblers.
gdb:
2017-01-26 Yao Qi <yao.qi@linaro.org>
Pedro Alves <palves@redhat.com>
PR gdb/20939
* disasm.c (gdb_disassembler::dis_asm_memory_error): Don't
call memory_error, save memaddr instead.
(gdb_disassembler::print_insn): If gdbarch_print_insn returns
negative, cal memory_error.
* disasm.h (gdb_disassembler) <m_err_memaddr>: New field.
gdb/testsuite:
2017-01-26 Yao Qi <yao.qi@linaro.org>
* gdb.base/all-architectures.exp.in (do_arch_tests): Test
disassemble on address 0.
This patch adds a unit test about memory error occurs on reading
memory, and check MEMORY_ERROR exception is always thrown.
gdb:
2017-01-26 Yao Qi <yao.qi@linaro.org>
* disasm-selftests.c (memory_error_test): New function.
(_initialize_disasm_selftests): Register memory_error_test.
This patch adds one unit test, which disassemble one instruction for
every gdbarch if available. The test needs one valid instruction of
each gdbarch, and most of them are got from breakpoint instruction.
For the rest gdbarch whose breakpoint instruction isn't a valid
instruction, I copy one instruction from the gas/testsuite/gas/
directory.
I get the valid instruction of most gdbarch except ia64, mep, mips,
tic6x, and xtensa. People familiar with these arch should be easy
to extend the test.
In order to achieve "do the unit test for every gdbarch", I add
selftest-arch.[c,h], so that we can register a function pointer,
which has one argument gdbarch. selftest.c will iterate over all
gdbarches to call the registered function pointer.
gdb:
2017-01-26 Yao Qi <yao.qi@linaro.org>
* Makefile.in (SFILES): Add disasm-selftests.c and
selftest-arch.c.
(COMMON_OBS): Add disasm-selftests.o and selftest-arch.o.
* disasm-selftests.c: New file.
* selftest-arch.c: New file.
* selftest-arch.h: New file.
opcodes/mep-dis.c:mep_print_insn has already had the code to
handle the case when info->section is NULL,
/* Picking the right ISA bitmask for the current context is tricky. */
if (info->section)
{
}
else /* sid or gdb */
{
}
so that we can still cal print_insn_mep even section can't be found.
On the other hand, user can disassemble an arbitrary address which
doesn't map to any section at all.
gdb:
2017-01-26 Yao Qi <yao.qi@linaro.org>
* mep-tdep.c (mep_gdb_print_insn): Set info->arch
to bfd_arch_mep. Don't return 0 if section is not
found. Call print_insn_mep.
This patch addes class gdb_disassembler, and refactor
code to use it. The gdb_disassembler object is saved
in disassember_info.application_data. However,
disassember_info.application_data is already used by
gdb for arm, mips spu, and scm-disasm. In arm and mips,
.application_data is gdbarch, but we can still get gdbarch
from gdb_disassember.
The use of application_data in spu is a little bit
complicated. It creates its own disassemble_info, and
save spu_dis_asm_data in .application_data. This will
overwrite the pointer to gdb_disassembler, so we need
to find another place to save spu_dis_asm_data. I
extend disassemble_info, and put "id" there.
gdb:
2017-01-26 Pedro Alves <palves@redhat.com>
Yao Qi <yao.qi@linaro.org>
* arm-tdep.c: Include "disasm.h".
(gdb_print_insn_arm): Update code to get gdbarch.
* disasm.c (dis_asm_read_memory): Change it to
gdb_disassembler::dis_asm_read_memory.
(dis_asm_memory_error): Likewise.
(dis_asm_print_address): Likewise.
(gdb_pretty_print_insn): Change it to
gdb_disassembler::pretty_print_insn.
(dump_insns): Add one argument gdb_disassemlber. All
callers updated.
(do_mixed_source_and_assembly_deprecated): Likewise.
(do_mixed_source_and_assembly): Likewise.
(do_assembly_only): Likewise.
(gdb_disassembler::gdb_disassembler): New.
(gdb_disassembler::print_insn): New.
* disasm.h (class gdb_disassembler): New.
(gdb_pretty_print_insn): Remove declaration.
(gdb_disassemble_info): Likewise.
* guile/scm-disasm.c (class gdbscm_disassembler): New.
(gdbscm_disasm_read_memory_worker): Update.
(gdbscm_disasm_read_memory): Update.
(gdbscm_disasm_memory_error): Remove.
(gdbscm_disasm_print_address): Remove.
(gdbscm_disassembler::gdbscm_disassembler): New.
(gdbscm_print_insn_from_port): Update.
* mips-tdep.c: Include disasm.h.
(gdb_print_insn_mips): Update code to get gdbarch.
* record-btrace.c (btrace_insn_history): Update.
* spu-tdep.c: Include disasm.h.
(struct spu_dis_asm_data): Remove.
(struct spu_dis_asm_info): New.
(spu_dis_asm_print_address): Use spu_dis_asm_info to get
SPU id.
(gdb_print_insn_spu): Cast disassemble_info to
spu_dis_asm_info.
This patch adds a new function null_stream, which returns a null
stream. The null stream can be used in multiple places. It is
used in gdb_insn_length, and the following patches will use it too.
gdb:
2017-01-26 Yao Qi <yao.qi@linaro.org>
* disasm.c (do_ui_file_delete): Delete.
(gdb_insn_length): Move code creating stream to ...
* utils.c (null_stream): ... here. New function.
* utils.h (null_stream): Declare.
This patch adds a DW_OP_implicit_value in dwarf assembler, and uses
dwarf assembler in implptr-64bit.exp. Using dwarf assembler in
implptr-64bit.exp exposes some limitations in dwarf assembler,
- some variables are not evaluated in the caller's context, so we
can not pass variable to assembler, like this
Dwarf::assemble $asm_file {
cu {
version $dwarf_version
addr_size $addr_size
is_64 $is_64
} {
}
and
{DW_AT_type :$struct_label "DW_FORM_ref$ref_addr_size"}
this limitation is fixed by adding "uplevel" and "subst".
- dwarf assembler doesn't emit DW_FORM_ref_addr for label referencing.
this limitation is fixed by adding a new character "%",
{ type %$int_label }
this means we want to emit DW_FORM_ref_addr for label referencing.
- we can't set the form of label referencing offset in dwarf assembler.
Nowadays, dwarf assembler guesses the form of labels, which is
DW_FORM_ref4. However, in implptr-64bit.exp, both DW_FORM_ref4
and DW_FORM_ref8 is used (see REF_ADDR in implptr-64bit.S). This
patch adds the flexibility of setting the form of label reference.
Both of them below are valid,
{DW_AT_type :$struct_label}
{DW_AT_type :$struct_label DW_FORM_ref8}
the former form is the default DW_FORM_ref4.
I compared the .debug_info of objects without and with this patch
applied. There is no changes except abbrev numbers.
gdb/testsuite:
2017-01-25 Andreas Arnez <arnez@linux.vnet.ibm.com>
Yao Qi <yao.qi@linaro.org>
* gdb.dwarf2/implptr-64bit.exp: Use dwarf assembler.
* gdb.dwarf2/implptr-64bit.S: Remove.
* lib/dwarf.exp (Dwarf): Handle character "%". Evaluate some
variables in caller's context. Add DW_OP_implicit_value.
DW_OP_GNU_implicit_pointer refers to a DIE with an offset of different
sizes in different dwarf versions. In v2, the size is the pointer size,
while in v3 and above, it is the ref_addr size. This patch fixes
dwarf assembler to emit the correct size of offset. We've already fixed
this size issue in gdb,
https://sourceware.org/ml/gdb-patches/2011-09/msg00451.html
gdb/testsuite:
2017-01-25 Yao Qi <yao.qi@linaro.org>
* lib/dwarf.exp (Dwarf::_location): Handle
DW_OP_GNU_implicit_pointer with proper size.
Since the reference to the Inferior Python object is managed by
gdbpy_ref (RAII), we can return directly from the loop. It's just a
leftover from the cleanups era.
gdb/ChangeLog:
* python/py-inferior.c (find_thread_object): Return directly
from the loop. Remove "found" variable.
When the gdbpy_ref objects get destroyed, they call Py_DECREF to
decrement the reference counter of the python object they hold a
reference to. Any time we call into the Python API, we should be
holding the GIL. The gdbpy_enter object does that for us in an
RAII-fashion.
However, if gdbpy_enter is declared after a gdbpy_ref object in a
function, gdbpy_enter's destructor will be called (and the GIL will be
released) before gdbpy_ref's destructor is called. Therefore, we will
end up calling Py_DECREF without holding the GIL.
This became obvious with Python 3.6, where memory management functions
have asserts to make sure that the GIL is held. This was exposed by
tests py-as-string.exp, py-function.exp and py-xmethods. For example:
(gdb) p $_as_string(enum_valid)
Fatal Python error: Python memory allocator called without holding the GIL
Current thread 0x00007f7f7b21c780 (most recent call first):
[1] 18678 abort (core dumped) ./gdb -nx testsuite/outputs/gdb.python/py-as-string/py-as-string
#0 0x00007ffff618bc37 in raise () from /lib/x86_64-linux-gnu/libc.so.6
#1 0x00007ffff618f028 in abort () from /lib/x86_64-linux-gnu/libc.so.6
#2 0x00007ffff6b104d6 in Py_FatalError (msg=msg@entry=0x7ffff6ba15b8 "Python memory allocator called without holding the GIL") at Python/pylifecycle.c:1457
#3 0x00007ffff6a37a68 in _PyMem_DebugCheckGIL () at Objects/obmalloc.c:1972
#4 0x00007ffff6a3804e in _PyMem_DebugFree (ctx=0x7ffff6e65290 <_PyMem_Debug+48>, ptr=0x24f8830) at Objects/obmalloc.c:1994
#5 0x00007ffff6a38e1d in PyMem_Free (ptr=<optimized out>) at Objects/obmalloc.c:442
#6 0x00007ffff6b866c6 in _PyFaulthandler_Fini () at ./Modules/faulthandler.c:1369
#7 0x00007ffff6b104bd in Py_FatalError (msg=msg@entry=0x7ffff6ba15b8 "Python memory allocator called without holding the GIL") at Python/pylifecycle.c:1431
#8 0x00007ffff6a37a68 in _PyMem_DebugCheckGIL () at Objects/obmalloc.c:1972
#9 0x00007ffff6a3804e in _PyMem_DebugFree (ctx=0x7ffff6e652c0 <_PyMem_Debug+96>, ptr=0x7ffff46b6040) at Objects/obmalloc.c:1994
#10 0x00007ffff6a38f55 in PyObject_Free (ptr=<optimized out>) at Objects/obmalloc.c:503
#11 0x00007ffff6a5f27e in unicode_dealloc (unicode=unicode@entry=0x7ffff46b6040) at Objects/unicodeobject.c:1794
#12 0x00007ffff6a352a9 in _Py_Dealloc (op=0x7ffff46b6040) at Objects/object.c:1786
#13 0x000000000063f28b in gdb_Py_DECREF (op=0x7ffff46b6040) at /home/emaisin/src/binutils-gdb/gdb/python/python-internal.h:192
#14 0x000000000063fa33 in gdbpy_ref_policy::decref (ptr=0x7ffff46b6040) at /home/emaisin/src/binutils-gdb/gdb/python/py-ref.h:35
#15 0x000000000063fa77 in gdb::ref_ptr<_object, gdbpy_ref_policy>::~ref_ptr (this=0x7fffffffcdf0, __in_chrg=<optimized out>) at /home/emaisin/src/binutils-gdb/gdb/common/gdb_ref_ptr.h:91
#16 0x000000000064d8b8 in fnpy_call (gdbarch=0x2b50010, language=0x115d2c0 <c_language_defn>, cookie=0x7ffff46b7468, argc=1, argv=0x7fffffffcf48)
at /home/emaisin/src/binutils-gdb/gdb/python/py-function.c:145
The fix is to place the gdbpy_enter first in the function. I also
cleaned up the comments a bit and removed the unnecessary initialization
of the value variable.
gdb/ChangeLog:
* python/py-function.c (fnpy_call): Reorder declarations to have
the gdbpy_enter object declared first.
* python/py-xmethods.c (gdbpy_get_xmethod_arg_types): Likewise.
New in v2:
- Define PyMem_RawMalloc as PyMem_Malloc for Python < 3.4 and use
PyMem_RawMalloc in the code.
Since Python 3.4, the callback installed in PyOS_ReadlineFunctionPointer
should return a value allocated with PyMem_RawMalloc instead of
PyMem_Malloc. The reason is that PyMem_Malloc must be called with the
Python Global Interpreter Lock (GIL) held, which is not the case in the
context where this function is called. PyMem_RawMalloc was introduced
for cases like this.
In Python 3.6, it looks like they added an assert to verify that
PyMem_Malloc was not called without the GIL. The consequence is that
typing anything in the python-interactive mode of gdb crashes the
process. The same behavior was observed with the official package on
Arch Linux as well as with a manual Python build on Ubuntu 14.04.
This is what is shown with a debug build of Python 3.6 (the error with a
non-debug build is far less clear):
(gdb) pi
>>> print(1)
Fatal Python error: Python memory allocator called without holding the GIL
Current thread 0x00007f1459af8780 (most recent call first):
[1] 21326 abort ./gdb
and the backtrace:
#0 0x00007ffff618bc37 in raise () from /lib/x86_64-linux-gnu/libc.so.6
#1 0x00007ffff618f028 in abort () from /lib/x86_64-linux-gnu/libc.so.6
#2 0x00007ffff6b104d6 in Py_FatalError (msg=msg@entry=0x7ffff6ba15b8 "Python memory allocator called without holding the GIL") at Python/pylifecycle.c:1457
#3 0x00007ffff6a37a68 in _PyMem_DebugCheckGIL () at Objects/obmalloc.c:1972
#4 0x00007ffff6a3804e in _PyMem_DebugFree (ctx=0x7ffff6e65290 <_PyMem_Debug+48>, ptr=0x24f8830) at Objects/obmalloc.c:1994
#5 0x00007ffff6a38e1d in PyMem_Free (ptr=<optimized out>) at Objects/obmalloc.c:442
#6 0x00007ffff6b866c6 in _PyFaulthandler_Fini () at ./Modules/faulthandler.c:1369
#7 0x00007ffff6b104bd in Py_FatalError (msg=msg@entry=0x7ffff6ba15b8 "Python memory allocator called without holding the GIL") at Python/pylifecycle.c:1431
#8 0x00007ffff6a37a68 in _PyMem_DebugCheckGIL () at Objects/obmalloc.c:1972
#9 0x00007ffff6a37aa3 in _PyMem_DebugMalloc (ctx=0x7ffff6e65290 <_PyMem_Debug+48>, nbytes=5) at Objects/obmalloc.c:1980
#10 0x00007ffff6a38d91 in PyMem_Malloc (size=<optimized out>) at Objects/obmalloc.c:418
#11 0x000000000064dbe2 in gdbpy_readline_wrapper (sys_stdin=0x7ffff6514640 <_IO_2_1_stdin_>, sys_stdout=0x7ffff6514400 <_IO_2_1_stdout_>, prompt=0x7ffff4d4f7d0 ">>> ")
at /home/emaisin/src/binutils-gdb/gdb/python/py-gdb-readline.c:75
The documentation is very clear about it [1] and it was also mentioned
in the "What's New In Python 3.4" page [2].
[1] https://docs.python.org/3/c-api/veryhigh.html#c.PyOS_ReadlineFunctionPointer
[2] https://docs.python.org/3/whatsnew/3.4.html#changes-in-the-c-api
gdb/ChangeLog:
* python/python-internal.h (PyMem_RawMalloc): Define for
Python < 3.4.
* python/py-gdb-readline.c (gdbpy_readline_wrapper): Use
PyMem_RawMalloc instead of PyMem_Malloc.
Some leftover uppercase test names in py-xmethods.exp. The patch also
replaces two "continue" calls with untested calls to make things a bit more
clear.
gdb/testsuite/ChangeLog:
2017-01-20 Luis Machado <lgustavo@codesourcery.com>
* gdb.python/py-xmethods.exp: Fix test names starting with lowercase
and add untested calls.
I noticed gdb.python/python.exp failing on aarch64-elf like so:
FAIL: gdb.python/python.exp: Test decode_line func1 line number
This particular test expects the line number for func1 to be 19, hardcoded.
In my aarch64-elf tests gdb thinks func1 is at line 20, making the test fail.
The following patch addresses this by reading the line number information from
GDB and comparing it against the python decoded symtab information.
gdb/testsuite/ChangeLog:
2017-01-20 Luis Machado <lgustavo@codesourcery.com>
* gdb.python/python.exp: Check line number against what GDB thinks
the line number is for func1.
Changes in v4:
- Replaced phex call with hex_string.
Changes in v3:
- Addressed comments by Pedro.
- Output of memory region size now in hex format.
- Misc formatting fixups.
- Addressed Simon's comments on formatting.
- Adjusted command text in the manual entry.
- Fixed up ChangeLog.
- Renamed flash_erase_all_command to flash_erase_command.
Changes in v2:
- Added NEWS entry.
- Fixed long lines.
- Address printing with paddress.
Years ago we contributed flash programming patches upstream. The following
patch is a leftover one that complements that functionality by adding a new
command to erase all reported flash memory blocks.
The command is most useful when we're dealing with flash-enabled targets
(mostly bare-metal) and we need to reset the board for some reason.
The wiping out of flash memory regions should help the target come up with a
known clean state from which the user can load a new image and resume
debugging. It is convenient enough to do this from the debugger, and there is
also an MI command to expose this functionality to the IDE's.
gdb/doc/ChangeLog:
2017-01-20 Mike Wrighton <mike_wrighton@codesourcery.com>
Luis Machado <lgustavo@codesourcery.com>
* gdb.texinfo (-target-flash-erase): New MI command description.
(flash-erase): New CLI command description.
gdb/ChangeLog:
2017-01-20 Mike Wrighton <mike_wrighton@codesourcery.com>
Luis Machado <lgustavo@codesourcery.com>
* NEWS (New commands): Mention flash-erase.
(New MI commands): Mention target-flash-erase.
* mi/mi-cmds.c (mi_cmd_target_flash_erase): Add target-flash-erase MI
command.
* mi/mi-cmds.h (mi_cmd_target_flash_erase): New declaration.
* mi/mi-main.c (mi_cmd_target_flash_erase): New function.
* target.c (flash_erase_command): New function.
(initialize_targets): Add new flash-erase command.
* target.h (flash_erase_command): New declaration.
The following change replaced an include of gregset.h by
an include of <sys/procfs.h>:
commit 39b2247157
Date: Thu Aug 11 12:01:22 2016 +0100
Subject: Fix fallout from gdb/20413's fix
(x32: linux_ptrace_test_ret_to_nx: Cannot PTRACE_PEEKUSER)
Unfortunately, this broke gdbserver on Android, because that file
does not exist on this platform. This patch fixes the issue by
conditionalizing its include with HAVE_SYS_PROCFS_H (which we check
both in gdb/configure and gdbserver/configure).
gdb/ChangeLog:
* nat/linux-ptrace.c: Only include <sys/procfs.h> if
HAVE_SYS_PROCFS_H is defined.
Tested by rebuilding gdbserver on arm-android and GNU/Linux.
2017-01-18 Alan Hayward <alan.hayward@arm.com>
* remote.c (struct cached_reg): Change data into a pointer.
* (stop_reply_dtr): Free data pointers before deleting vector.
(process_stop_reply): Likewise.
(remote_parse_stop_reply): Allocate space for data
gdb/ChangeLog:
2017-01-16 Ivo Raisr <ivo.raisr@oracle.com>
Split real and pseudo registers.
* sparc-tdep.h (SPARC_CORE_REGISTERS): New macro.
(sparc32_pseudo_regnum): New enum.
* sparc64-tdep.h (sparc64_pseudo_regnum): New enum.
* sparc-tdep.c (SPARC32_FPU_REGISTERS): New macro.
(SPARC32_CP0_REGISTERS): New macro.
(sparc32_pseudo_register_name): New function.
(sparc32_register_name): Use sparc32_pseudo_register_name.
(sparc32_pseudo_register_type): New function.
(sparc32_register_type): Use sparc32_pseudo_register_type.
(sparc32_pseudo_register_read, sparc32_pseudo_register_write): Handle
pseudo register numbers.
* sparc64-tdep.c SPARC64_FPU_REGISTERS): New macro.
(SPARC64_CP0_REGISTERS): New macro.
(sparc64_pseudo_register_name): New function.
(sparc64_register_name): Use sparc64_pseudo_register_name.
(sparc64_pseudo_register_type): New function.
(sparc64_register_type): Use sparc64_pseudo_register_type.
(sparc64_pseudo_register_read, sparc64_pseudo_register_write): Handle
pseudo register numbers.
(sparc64_store_floating_fields, sparc64_extract_floating_fields,
sparc64_store_arguments): Handle pseudo register numbers.
If we turn "remote debug" on and GDB does some vFile operations,
a lot of things will be printed in the screen, which makes
"remote debug" useless.
This patch changes the code that we only print 512 chars in max in
debugging messages, like this,
Sending packet: $qXfer:features:read:target.xml:0,fff#7d...Packet received: l<?xml version="1.0"?>\n<!-- Copyright (C) 2010-2016 Free Software Foundation, Inc.\n\n Copying and distribution of this file, with or without modification,\n are permitted in any medium without royalty provided the copyright\n notice and this notice are preserved. -->\n\n<!-- AMD64 with AVX - Includes Linux-only special "register". -->\n\n<!DOCTYPE target SYSTEM "gdb-target.dtd">\n<target>\n <architecture>i386:x86-64</architecture>\n <osabi>GNU/Linux</osabi>\n <xi:include href="64bit-core.xml"/>\n <xi:[14 bytes omitted]
Sending packet: $qXfer:auxv:read::0,1000#6b...Packet received: l!\000\000\000\000\000\000\000\000d\000\000\000\000\000\000\000\003\000\000\000\000\000\000\000@\000@\000\000\000\000\000\004\000\000\000\000\000\000\0008\000\000\000\000\000\000\000\005\000\000\000\000\000\000\000\t\000\000\000\000\000\000\000\a\000\000\000\000\000\000\000\177\000\000\b\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\t\000\000\000\000\000\000\000\000\004@\000\000\000\000\000\013\000\000\000\000\000\000\003\000\000\000\000\000\000\f\000\000\000\000\000\000\003\000\000\000\000\000\000\r\000\000\000\000\000\000\003\000\000\000\000\000\000\016\000\000\000\000\000\000\003\000\000\000\000\000\000\027\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\031\000\000\000\000\000\000\177\000\000\037\000\000\000\000\000\000\000\000\017\000\000\000\000\000\000\00\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000[582 bytes omitted]
gdb:
2017-01-13 Yao Qi <yao.qi@linaro.org>
* remote.c (REMOTE_DEBUG_MAX_CHAR): New macro.
(putpkt_binary): Print only REMOTE_DEBUG_MAX_CHAR chars in debug
output.
(getpkt_or_notif_sane_1): Likewise.
If I run 'make check-headers', I get these errors,
....
In file included from ../../binutils-gdb/gdb/common/common-defs.h:78:0,
from ../../binutils-gdb/gdb/defs.h:28,
from <command-line>:0:
../../binutils-gdb/gdb/common/common-utils.h:23:18: fatal error: string: No such file or directory
#include <string>
^
because we still parse headers as c file with a c compiler, which is no
longer true after we moved to C++. This patch changes it to use C++
compiler and parse headers as c++ headers.
gdb:
2017-01-13 Yao Qi <yao.qi@linaro.org>
* Makefile.in (checker-headers): Use CXX and CXX_DIALET instead
of CC. Pass "-x c++-header" instead of "-x c".
I find this comment counter intuitive, and it probably predates the
always-target-async change. AFAIK, remote will always be async, unless
the user explicitly prevents it with "maint set target-async off".
gdb/ChangeLog:
* remote.c (remote_can_async_p): Update comment.
I think this comment is outdated. Nowadays, linux-nat is always async,
unless the user has explictly turned it off with
"maint set target-async off".
gdb/ChangeLog:
* linux-nat.c (linux_nat_can_async_p): Update comment.
By inspecting the serial_add_interface calls, I found that the serial
interface names that we have today are:
- hardwire
- terminal
- pipe
- tcp
- event
The calls to serial_interface_lookup with any other names are most
likely leftovers which can be removed since these serial interfaces
don't exist anymore. The commits that removed the "pc" and "parallel"
interfaces are respectively:
cb2a4ac5da
and
e386d4d2fb
gdb/ChangeLog:
* serial.c (serial_open): Forget about "pc" and "lpt" serial interface.
This adds a constructor and destructor to demangle_parse_info, and
then changes all the users to use them. This removes
make_cleanup_cp_demangled_name_parse_free and its single use.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-type.c (typy_legacy_template_argument): Update.
* cp-support.h (struct demangle_parse_info) (demangle_parse_info,
~demangle_parse_info): Declare new members.
(cp_demangled_name_to_comp): Return unique_ptr.
(cp_demangled_name_parse_free)
(make_cleanup_cp_demangled_name_parse_free)
(cp_new_demangle_parse_info): Remove.
* cp-support.c (do_demangled_name_parse_free_cleanup)
(make_cleanup_cp_demangled_name_parse_free): Remove.
(inspect_type, cp_canonicalize_string_full)
(cp_canonicalize_string): Update.
(mangled_name_to_comp): Change return type.
(cp_class_name_from_physname, method_name_from_physname)
(cp_func_name, cp_remove_params): Update.
* cp-name-parser.y (demangle_parse_info): New constructor, from
cp_new_demangle_parse_info.
(~demangle_parse_info): New destructor, from
cp_demangled_name_parse_free.
(cp_merge_demangle_parse_infos): Update.
(cp_demangled_name_to_comp): Change return type.
This replaces a cleanup in execute_gdb_command with an instance of
std::string.
Testing showed that this originally missed a cleanup that was returned
by prevent_dont_repeat. This version of the patch changes
prevent_dont_repeat to return a scoped_restore rather than a cleanup.
2017-01-10 Tom Tromey <tom@tromey.com>
* top.c (prevent_dont_repeat): Change return type.
* python/python.c (execute_gdb_command): Use std::string.
Update.
* guile/guile.c (gdbscm_execute_gdb_command): Update.
* command.h (prevent_dont_repeat): Change return type.
* breakpoint.c (bpstat_do_actions_1): Update.
This changes dwarf2_evaluate_loc_desc_full to use scoped_value_mark.
Note that this function previously called do_cleanup using the same
cleanup multiple times. I had thought this was buggy, but re-reading
make_my_cleanup2 indicates that it is not. Nevertheless it is
surprising, and at least one of the calls (the one that is completely
removed in this patch) seems to have been done under the assumption
that it would still have some effect.
2017-01-10 Tom Tromey <tom@tromey.com>
* value.h (scoped_value_mark::~scoped_value_mark): Call
free_to_mark.
(scoped_value_mark::free_to_mark): New method.
* dwarf2loc.c (dwarf2_evaluate_loc_desc_full): Use
scoped_value_mark.
This adds a scoped_value_mark class, that records the value mark in
the constructor and then calls value_free_to_mark in the destructor.
It then updates various spots in gdb to use this class, rather than a
cleanup.
It would be better overall to replace "struct value *" with a
shared_ptr, maybe eliminating the need for this class (watchpoints
would perhaps need some new mechanism as well). However, that's
difficult to do.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-value.c (valpy_dereference, valpy_referenced_value)
(valpy_reference_value, valpy_const_value, valpy_get_address)
(valpy_get_dynamic_type, valpy_lazy_string, valpy_do_cast)
(valpy_getitem, valpy_call, valpy_binop_throw, valpy_negative)
(valpy_absolute, valpy_richcompare_throw): Use scoped_value_mark.
* dwarf2loc.c (dwarf2_loc_desc_get_symbol_read_needs): Use
scoped_value_mark.
* dwarf2-frame.c (execute_stack_op): Use scoped_value_mark.
* value.h (scoped_value_mark): New class.
This removes make_cleanup_discard_psymtabs in favor of a new class.
2017-01-10 Tom Tromey <tom@tromey.com>
* dwarf2read.c (dwarf2_build_psymtabs): Use psymtab_discarder.
* psympriv.h (make_cleanup_discard_psymtabs): Don't declare.
* psymtab.c (discard_psymtabs_upto): Remove.
(make_cleanup_discard_psymtabs): Remove.
(struct psymtab_state): Remove.
This introduces a new class, gdb::unlinker, that unlinks a file in the
destructor. The user of this class has the option to preserve the
file instead, by calling the "keep" method.
This patch then changes the spots in gdb that use unlink in a cleanup
to use this class instead. In one spot I went ahead and removed all
the cleanups from the function.
This fixes one latent bug -- do_bfd_delete_cleanup could refer to
freed memory, by decref'ing the BFD before using its filename.
2017-01-10 Tom Tromey <tom@tromey.com>
* record-full.c (record_full_save_cleanups): Remove.
(record_full_save): Use gdb::unlinker.
* gcore.c (do_bfd_delete_cleanup): Remove.
(gcore_command): Use gdb::unlinker, unique_xmalloc_ptr. Remove
cleanups.
* dwarf2read.c (unlink_if_set): Remove.
(write_psymtabs_to_index): Use gdb::unlinker.
* common/gdb_unlinker.h: New file.
This introduces a new specialization of gdb::ref_ptr that can be used
to manage BFD reference counts. Then it changes most places in gdb to
use this new class, rather than explicit reference-counting or
cleanups. This patch removes make_cleanup_bfd_unref.
If you look you will see a couple of spots using "release" where a use
of gdb_bfd_ref_ptr would be cleaner. These will be fixed in the next
patch.
I think this patch fixes some latent bugs. For example, it seems to
me that previously objfpy_add_separate_debug_file leaked a BFD.
I'm not 100% certain that the macho_symfile_read_all_oso change is
correct. The existing code here is hard for me to follow. One goal
of this sort of automated reference counting, though, is to make it
more difficult to make logic errors; so hopefully the code is clear
now.
2017-01-10 Tom Tromey <tom@tromey.com>
* windows-tdep.c (windows_xfer_shared_library): Update.
* windows-nat.c (windows_make_so): Update.
* utils.h (make_cleanup_bfd_unref): Remove.
* utils.c (do_bfd_close_cleanup, make_cleanup_bfd_unref): Remove.
* symfile.h (symfile_bfd_open)
(find_separate_debug_file_in_section): Return gdb_bfd_ref_ptr.
* symfile.c (read_symbols, symbol_file_add)
(separate_debug_file_exists): Update.
(symfile_bfd_open): Return gdb_bfd_ref_ptr.
(generic_load, reread_symbols): Update.
* symfile-mem.c (symbol_file_add_from_memory): Update.
* spu-linux-nat.c (spu_bfd_open): Return gdb_bfd_ref_ptr.
(spu_symbol_file_add_from_memory): Update.
* solist.h (struct target_so_ops) <bfd_open>: Return
gdb_bfd_ref_ptr.
(solib_bfd_fopen, solib_bfd_open): Return gdb_bfd_ref_ptr.
* solib.c (solib_bfd_fopen, solib_bfd_open): Return
gdb_bfd_ref_ptr.
(solib_map_sections, reload_shared_libraries_1): Update.
* solib-svr4.c (enable_break): Update.
* solib-spu.c (spu_bfd_fopen): Return gdb_bfd_ref_ptr.
* solib-frv.c (enable_break2): Update.
* solib-dsbt.c (enable_break): Update.
* solib-darwin.c (gdb_bfd_mach_o_fat_extract): Return
gdb_bfd_ref_ptr.
(darwin_solib_get_all_image_info_addr_at_init): Update.
(darwin_bfd_open): Return gdb_bfd_ref_ptr.
* solib-aix.c (solib_aix_bfd_open): Return gdb_bfd_ref_ptr.
* record-full.c (record_full_save): Update.
* python/py-objfile.c (objfpy_add_separate_debug_file): Update.
* procfs.c (insert_dbx_link_bpt_in_file): Update.
* minidebug.c (find_separate_debug_file_in_section): Return
gdb_bfd_ref_ptr.
* machoread.c (macho_add_oso_symfile): Change abfd to
gdb_bfd_ref_ptr.
(macho_symfile_read_all_oso): Update.
(macho_check_dsym): Return gdb_bfd_ref_ptr.
(macho_symfile_read): Update.
* jit.c (bfd_open_from_target_memory): Return gdb_bfd_ref_ptr.
(jit_bfd_try_read_symtab): Update.
* gdb_bfd.h (gdb_bfd_open, gdb_bfd_fopen, gdb_bfd_openr)
(gdb_bfd_openw, gdb_bfd_openr_iovec)
(gdb_bfd_openr_next_archived_file, gdb_bfd_fdopenr): Return
gdb_bfd_ref_ptr.
(gdb_bfd_ref_policy): New struct.
(gdb_bfd_ref_ptr): New typedef.
* gdb_bfd.c (gdb_bfd_open, gdb_bfd_fopen, gdb_bfd_openr)
(gdb_bfd_openw, gdb_bfd_openr_iovec)
(gdb_bfd_openr_next_archived_file, gdb_bfd_fdopenr): Return
gdb_bfd_ref_ptr.
* gcore.h (create_gcore_bfd): Return gdb_bfd_ref_ptr.
* gcore.c (create_gcore_bfd): Return gdb_bfd_ref_ptr.
(gcore_command): Update.
* exec.c (exec_file_attach): Update.
* elfread.c (elf_symfile_read): Update.
* dwarf2read.c (dwarf2_get_dwz_file): Update.
(try_open_dwop_file, open_dwo_file): Return gdb_bfd_ref_ptr.
(open_and_init_dwo_file): Update.
(open_dwp_file): Return gdb_bfd_ref_ptr.
(open_and_init_dwp_file): Update.
* corelow.c (core_open): Update.
* compile/compile-object-load.c (compile_object_load): Update.
* common/gdb_ref_ptr.h (ref_ptr::operator->): New operator.
* coffread.c (coff_symfile_read): Update.
* cli/cli-dump.c (bfd_openr_or_error, bfd_openw_or_error): Return
gdb_bfd_ref_ptr. Rename.
(dump_bfd_file, restore_command): Update.
* build-id.h (build_id_to_debug_bfd): Return gdb_bfd_ref_ptr.
* build-id.c (build_id_to_debug_bfd): Return gdb_bfd_ref_ptr.
(find_separate_debug_file_by_buildid): Update.
This adds a new gdb_ref_ptr.h, that implements a reference-counting
smart pointer class, where the user of the class supplies a
reference-counting policy object.
This class will be used in the next patch, which changes most explicit
BFD reference counts to use this new type. Meanwhile, this patch
changes gdbpy_ref to be a specialization of this new class.
This change required adding new nullptr_t overloads some operators in
gdb_ref_ptr.h. I suspect this was needed because some Python header
redefines NULL, but I'm not certain.
2017-01-10 Tom Tromey <tom@tromey.com>
* common/gdb_ref_ptr.h: New file.
* python/py-ref.h (struct gdbpy_ref_policy): New.
(gdbpy_ref): Now a typedef.
This removes make_cleanup_htab_delete in favor of destructors,
building on an earlier patch that added the htab_up typedef.
Testing revealed that more cleanup-removal work was needed in
dwarf2loc.c, so this version of the patch changes code there to use
unordered_set and vector, removing some more cleanups.
2017-01-10 Tom Tromey <tom@tromey.com>
* utils.h (make_cleanup_htab_delete): Don't declare.
* utils.c (do_htab_delete_cleanup, make_cleanup_htab_delete):
Remove.
* linespec.c (decode_compound_collector): Add constructor,
destructor.
(lookup_prefix_sym): Remove cleanup.
(symtab_collector): Add constructor, destructor.
(collect_symtabs_from_filename): Remove cleanup.
* disasm.c (do_mixed_source_and_assembly): Use htab_up.
* compile/compile-c-symbols.c (generate_c_for_variable_locations):
Use htab_up.
* gnu-v3-abi.c (gnuv3_print_vtable): Use htab_up.
* dwarf2read.c (dw2_expand_symtabs_matching)
(dw2_map_symbol_filenames, dwarf_decode_macros)
(write_psymtabs_to_index): Use htab_up.
* dwarf2loc.c (func_verify_no_selftailcall)
(call_site_find_chain_1, func_verify_no_selftailcall)
(chain_candidate, call_site_find_chain_1): Use std::unordered_set,
std::vector, gdb::unique_xmalloc_ptr.
(call_sitep): Remove typedef.
(dwarf2_locexpr_baton_eval): Remove unused variable.
make_cleanup_py_decref and make_cleanup_py_xdecref are now unused, so
this patch removes themm. Future Python changes should use gdbpy_ref
instead.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/python-internal.h (make_cleanup_py_decref)
(make_cleanup_py_xdecref): Don't declare.
* python/py-utils.c (py_decref, make_cleanup_py_decref)
(py_xdecref, make_cleanup_py_xdecref): Remove.
This changes some spots in py-framefilter.c to use gdbpy_ref rather
than make_cleanup_py_decref or make_cleanup_py_xdecref.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-framefilter.c (py_mi_print_variables): Use gdbpy_ref.
(py_print_locals, enumerate_locals, py_print_args): Use gdbpy_ref.
This changes enumerate_args to use gdbpy_ref, and gets rid of many
gotos.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-framefilter.c (enumerate_args): Use gdbpy_ref.
This changes more places in py-utils.c to use gdbpy_ref.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-utils.c (unicode_to_encoded_string)
(python_string_to_target_string)
(python_string_to_target_python_string)
(python_string_to_host_string, gdbpy_obj_to_string)
(get_addr_from_python): Use gdbpy_ref.
This changes pyuw_object_attribute_to_pointer to use gdbpy_ref.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-unwind.c (pyuw_object_attribute_to_pointer): Use
gdbpy_ref.
