Factor in the presence of a `.gnu.attributes' section at the end of the
respective dumps:
Disassembly of section .gnu.attributes:
0000000000000000 <.gnu.attributes>:
0: 41000000 bc0f 4 <__dso_displacement+0x4>
4: 0f676e75 jal d9db9d4 <__dso_displacement+0xd9db9d4>
8: 00010000 sll zero,at,0x0
c: 00070401 0x70401
and also ignore any trailing output with the IRIX variant of n64 GOT
relocation tests, like already done with the Linux and the embedded
ones, removing:
FAIL: MIPS ELF got reloc n64
FAIL: MIPS ELF xgot reloc n64
LD testsuite regressions with the `mips-sgi-irix6' target.
ld/
* testsuite/ld-mips-elf/elf-rel-got-n64.d: Add `#pass' at the
end.
* testsuite/ld-mips-elf/elf-rel-xgot-n64.d: Likewise.
Correct a MIPS/BFD linker issue with dynamic symbol and corresponding
GOT entry values being redirected to lazy binding stubs where the stubs
section has been discarded by assigning to the `/DISCARD/' output
section in the linker script used. The issue manifests itself by the
values entered being relative to the absolute section, which is what any
discarded sections are internally assigned in the linker.
For the `stub-dynsym-2.s' piece of code included as a test case with
this change this issue results in the dynamic symbol table and the GOT
looking like:
Symbol table '.dynsym' contains 3 entries:
Num: Value Size Type Bind Vis Ndx Name
0: 00000000 0 NOTYPE LOCAL DEFAULT UND
1: 00000010 0 FUNC GLOBAL DEFAULT UND bar
2: 00000000 0 FUNC GLOBAL DEFAULT UND foo
Primary GOT:
Canonical gp value: 00097ff0
Reserved entries:
Address Access Initial Purpose
00090000 -32752(gp) 00000000 Lazy resolver
00090004 -32748(gp) 80000000 Module pointer (GNU extension)
Global entries:
Address Access Initial Sym.Val. Type Ndx Name
00090008 -32744(gp) 00000010 00000010 FUNC UND bar
0009000c -32740(gp) 00000000 00000000 FUNC UND foo
if assembled to regular MIPS code, or:
Symbol table '.dynsym' contains 3 entries:
Num: Value Size Type Bind Vis Ndx Name
0: 00000000 0 NOTYPE LOCAL DEFAULT UND
1: 0000000d 0 FUNC GLOBAL DEFAULT UND bar
2: 00000001 0 FUNC GLOBAL DEFAULT UND foo
Primary GOT:
Canonical gp value: 00097ff0
Reserved entries:
Address Access Initial Purpose
00090000 -32752(gp) 00000000 Lazy resolver
00090004 -32748(gp) 80000000 Module pointer (GNU extension)
Global entries:
Address Access Initial Sym.Val. Type Ndx Name
00090008 -32744(gp) 0000000d 0000000d FUNC UND bar
0009000c -32740(gp) 00000001 00000001 FUNC UND foo
if assembled to microMIPS code. Symbol values and GOT entries record
the offset into the inexistent stubs section and the ISA bit rather than
zero, which would be the case if a lazy binding stub was not used for
other reasons, such as the value of the symbol being taken for a purpose
other than making a function call (e.g. an R_MIPS_GOT16 relocation).
Correct the issue by refraining from redirecting symbols to lazy binding
stubs if the stubs section is going to be discarded.
bfd/
* elfxx-mips.c (_bfd_mips_elf_adjust_dynamic_symbol): Don't set
`->needs_lazy_stub' if the stubs output section is the absolute
section.
ld/
* testsuite/ld-mips-elf/stub-dynsym-2.dd: New test.
* testsuite/ld-mips-elf/stub-dynsym-2.gd: New test.
* testsuite/ld-mips-elf/stub-dynsym-2.sd: New test.
* testsuite/ld-mips-elf/stub-dynsym-discard-2.gd: New test.
* testsuite/ld-mips-elf/stub-dynsym-discard-2.sd: New test.
* testsuite/ld-mips-elf/stub-dynsym-micromips-2.dd: New test.
* testsuite/ld-mips-elf/stub-dynsym-micromips-2.gd: New test.
* testsuite/ld-mips-elf/stub-dynsym-micromips-2.sd: New test.
* testsuite/ld-mips-elf/stub-dynsym-micromips-insn32-2.dd: New
test.
* testsuite/ld-mips-elf/stub-dynsym-micromips-insn32-2.gd: New
test.
* testsuite/ld-mips-elf/stub-dynsym-micromips-insn32-2.sd: New
test.
* testsuite/ld-mips-elf/stub-dynsym-2.ld: New test linker
script.
* testsuite/ld-mips-elf/stub-dynsym-discard-2.ld: New test
linker script.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
Switch to use add_setshow_zuinteger_unlimited_cmd for some of the
control variables in remote.c. The variables
hardware-watchpoint-limit, hardware-breakpoint-limit, and
hardware-watchpoint-length-limit are all changed. For example, a user
will now see this:
(gdb) show remote hardware-breakpoint-limit
The maximum number of target hardware breakpoints is unlimited.
Instead of this:
(gdb) show remote hardware-breakpoint-limit
The maximum number of target hardware breakpoints is -1.
And can do this:
(gdb) set remote hardware-breakpoint-limit unlimited
However, previously any negative value implied "unlimited", now only
-1, or the text "unlimited" can be used for unlimited. Any other
negative value will give an error about invalid input. This is a
small change in the user interface, but, hopefully, this will not
cause too many problems.
I've also added show functions for these three variables to allow for
internationalisation.
gdb/ChangeLog:
* remote.c (show_hardware_watchpoint_limit): New function.
(show_hardware_watchpoint_length_limit): New function.
(show_hardware_breakpoint_limit): New function.
(_initialize_remote): Use add_setshow_zuinteger_unlimited_cmd
where appropriate, update help text.
gdb/doc/ChangeLog:
* gdb.texinfo (Remote Configuration): Update descriptions for
set/show of hardware-watchpoint-limit, hardware-breakpoint-limit,
and hardware-watchpoint-length-limit variables.
Bring the LD implementation of `run_dump_test' in line with its binutils
and GAS counterparts and report the UNSUPPORTED status for tests the run
of which has been prevented by means of one or more of `target',
`alltargets' and `notarget' tags. Define `skip', `anyskip' and `noskip'
tags, which do not report anything for tests that are not run.
The rationale behind this is that we want to have unsupported tests
reported to ensure that they have actually been attempted and have not
been accidentally suppressed. Then tests which have target-specific
variants that cannot be expressed with a single .d file can make use of
the newly added tags to silently suppress the uninteresting variants.
ld/
* testsuite/lib/ld-lib.exp (run_dump_test): Call `unsupported'
if the target being tested has been excluded by means of one or
more of `target', `alltargets' and `notarget' tags. Add support
for `skip', `anyskip' and `noskip' tags.
Bring the LD implementation of `run_dump_test' in line with its binutils
and GAS counterparts and use the intended test name, from the `name' tag
if set, for test status reporting as soon as it is available.
ld/
* testsuite/lib/ld-lib.exp (run_dump_test): Move the setting of
`testname' earlier on and use it for test status reporting.
Remove `-Wshadow' compilation errors:
cc1: warnings being treated as errors
.../opcodes/s12z-dis.c: In function 'lea_reg_xys_opr':
.../opcodes/s12z-dis.c:814: error: declaration of 'reg' shadows a global declaration
.../opcodes/s12z-dis.c:783: error: shadowed declaration is here
.../opcodes/s12z-dis.c: In function 'lea_reg_xys':
.../opcodes/s12z-dis.c:843: error: declaration of 'reg' shadows a global declaration
.../opcodes/s12z-dis.c:783: error: shadowed declaration is here
.../opcodes/s12z-dis.c: In function 'print_insn_loop_primitive':
.../opcodes/s12z-dis.c:2206: error: declaration of 'reg' shadows a global declaration
.../opcodes/s12z-dis.c:783: error: shadowed declaration is here
which for versions of GCC before 4.8 prevent support for S12Z targets
from being built. See also GCC PR c/53066.
opcodes/
* s12z-dis.c (lea_reg_xys_opr): Rename `reg' local variable to
`reg_xys'.
(lea_reg_xys): Likewise.
(print_insn_loop_primitive): Rename `reg' local variable to
`reg_dxy'.
In the gdb.base/examine-backward.exp test script, we check to see if
address zero is readable, and then read memory first forward from
address zero, and then backward from address zero.
The problem is, being able to read address zero does not guarantee
that you'll be able to read from the other end of the address space,
and the test probably shouldn't assume that is the case.
This patch updates the test script so that even if address zero is
known non-readable, we still run the tests, the tests in question are
mostly about, can GDB calculate the correct address to read from, we
can confirm this even if the final read ultimately fails. We also no
longer assume that if address zero is readable, then the other end of
the address space will be readable.
One further change is that, when we examined the memory at address
zero, the regexp used to match the address expected that the zero
address would have two '0' digits as the least significant digits. As
GDB strips leading zeros from addresses this was causing the test to
fail. I've reduced the zero address to a single 0 digit.
gdb/testsuite/ChangeLog:
* gdb.base/examine-backward.exp: Still run tests around address
0x0, even if address 0x0 is not readable. Update the pattern for
matching address 0x0 in expected output.
Neither XM_CDEPS nor NAT_CLIBS are defined anywhere, so remove the
uses.
gdb/ChangeLog
2018-07-09 Tom Tromey <tom@tromey.com>
* Makefile.in (CDEPS): Don't mention XM_CDEPS.
(CLIBS): Don't mention NAT_CLIBS.
Nothing defines XM_ADD_FILES, TM_ADD_FILES, or NAT_ADD_FILES any more,
so consequently ADD_FILES and ADD_DEPS are no longer needed. So, this
removes them.
gdb/ChangeLog
2018-07-09 Tom Tromey <tom@tromey.com>
* Makefile.in (ADD_FILES, ADD_DEPS): Remove.
(LIBGDB_OBS, clean mostlyclean): Update.
(gdb$(EXEEXT), insight$(EXEEXT)): Update.
This minimizes the "make" output from the yacc and lex rules,
following the same technique as the rest of the Makefile.
The lex rule had a special case to deal with the situation where flex
is not available. I don't think this is needed, so I removed it. If
flex is truly unavailable, the person building gdb can simply "touch"
the output file.
gdb/ChangeLog
2018-07-09 Tom Tromey <tom@tromey.com>
* Makefile.in (%.c: %.y): Use ECHO_YACC.
(%.c: %.l): Use ECHO_LEX. Just fail if flex not available.
* silent-rules.mk (ECHO_YACC, ECHO_LEX): New variables.
exec.c ws handled specially in COMMON_OBS, but there doesn't seem to
be a reason for this. This changes the Makefile to treat exec.c as an
ordinary source file.
gdb/ChangeLog
2018-07-09 Tom Tromey <tom@tromey.com>
* Makefile.in (ALLDEPFILES): Remove exec.c.
(COMMON_OBS): Remove exec.o.
(COMMON_SFILES): Add exec.c.
I don't think anyone uses lint any more, so this removes the support
for it from the Makefile.
gdb/ChangeLog
2018-07-09 Tom Tromey <tom@tromey.com>
* Makefile.in (LINT, LINTFLAGS, LINTFILES, lint): Remove.
This introduces a stamp file for version.c, preventing unnecessary
version.o rebuilds.
gdb/ChangeLog
2018-07-09 Tom Tromey <tom@tromey.com>
* Makefile.in (clean mostlyclean): Remove stamp-version.
(version.c): Depend on stamp-version.
(stamp-version): New rule, from version.c rule.
This introduces a stamp file for init.c. This prevents constant
rebuilds of init.o, by arranging for init.c to only be modified when
its contents change. (FWIW this is a standard idiom in use by
Automake and by gdb itself for many years.)
gdb/ChangeLog
2018-07-09 Tom Tromey <tom@tromey.com>
* Makefile.in (init.c): Depend on stamp-init.
(stamp-init): New rule, from init.c rule.
(clean mostlyclean): Remove stamp-init.
This simplifies the INIT_FILES variable. COMMON_OBS includes
CONFIG_OBS and SUBDIR_GCC_COMPILE_OBS, so there's no need to reference
CONFIG_OBS or SUBDIR_GCC_COMPILE_SRCS there. Once this is done, it it
clear that duplicates can't occur, so remove the duplicate-removing
code as well.
gdb/ChangeLog
2018-07-09 Tom Tromey <tom@tromey.com>
* Makefile.in (INIT_FILES): Remove CONFIG_SRCS,
SUBDIR_GCC_COMPILE_SRCS.
The init.c build rule has a few sed expressions that aren't necessary
any more. This removes them.
gdb/ChangeLog
2018-07-09 Tom Tromey <tom@tromey.com>
* Makefile.in (init.c): Remove some unused sed rules.
The TSOBS variable doesn't seem to serve a useful purpose in
gdb/Makefile.in, so remove it.
gdb/ChangeLog
2018-07-09 Tom Tromey <tom@tromey.com>
* Makefile.in (TSOBS): Remove.
(INIT_FILES): Update.
(LIBGDB_OBS): Update.
(COMMON_SFILES): Add inflow.c.
(SFILES): Remove inflow.c.
Use changequote to match "i[3-7]86-*-linux-*", instead of
"i3-786-*-linux-*".
PR ld/23388
* configure.ac: Use changequote for "i[3-7]86-*-linux-*".
* configure: Regenerated.
With config.sub now properly returning m68hc12-unknown-elf rather than
m68hc12-unknown-none, more ELF tests run. This patch enables
STB_GNU_UNIQUE processing fixing some testsuite failures that probably
no m68hc12 user cares about, and removes some XPASSes.
bfd/
* elf32-m68hc1x.c (elf32_m68hc11_post_process_headers): Call
_bfd_elf_post_process_headers.
ld/
* testsuite/ld-discard/extern.d: Remove m68hc12 xfail.
* testsuite/ld-discard/start.d: Likewise.
* testsuite/ld-discard/static.d: Likewise.
In case params.thumb_entry_symbol has its default NULL value, using it
to print a warning in gld${EMULATION_NAME}_finish results in a crash.
Use h->root.string instead which either points to
params.thumb_entry_symbol name or to entry_symbol name.
2018-07-09 Christophe Lyon <christophe.lyon@linaro.org>
* emultempl/armelf.em (gld${EMULATION_NAME}_finish): Use the right
symbol name in case of warning.
Change-Id: Iec61a833c0ad538b1440bf326ba67834c314dd63
------------------------------------------------------------------------------
(gdb) help save gdb-index
Save a gdb-index file.
Usage: save gdb-index [-dwarf-5] DIRECTORY
No options create one file with .gdb-index extension for pre-DWARF-5
compatible .gdb_index section. With -dwarf-5 creates two files with
extension .debug_names and .debug_str for DWARF-5 .debug_names section.
------------------------------------------------------------------------------
But gdb-add-index command provided no way how to pass the -dwarf-5 option.
gdb/ChangeLog
2018-07-07 Jan Kratochvil <jan.kratochvil@redhat.com>
* contrib/gdb-add-index.sh ($dwarf5): New, use it.
Resolved reference to a weak undefined symbol in PIE must not have
a dynamic relative relocation against itself, otherwise the value of a
reference will be changed from 0 to the base of executable, breaking
code like the following:
void weak_function (void);
if (weak_function)
weak_function ();
This fixes tests for PR ld/22269 and a number of PIE tests in xtensa gcc
testsuite.
bfd/
2018-07-06 Max Filippov <jcmvbkbc@gmail.com>
* elf32-xtensa.c (elf_xtensa_allocate_dynrelocs): Don't allocate
space for dynamic relocation for undefined weak symbol.
(elf_xtensa_relocate_section): Don't emit R_XTENSA_RELATIVE
relocation for undefined weak symbols.
(shrink_dynamic_reloc_sections): Don't shrink dynamic relocation
section for relocations against undefined weak symbols.
The NT_ARM_SVE section is documented here:
https://github.com/torvalds/linux/blob/master/Documentation/arm64/sve.txt
* A NT_ARM_SVE note will be added to each coredump for each thread of the
dumped process. The contents will be equivalent to the data that would have
been read if a PTRACE_GETREGSET of NT_ARM_SVE were executed for each thread
when the coredump was generated.
* elf.c (elfcore_grok_aarch_sve): New function.
(elfcore_grok_note): Check for Aarch64 SVE.
(elfcore_write_aarch_sve): New function.
(elfcore_write_register_note): Check for Aarch64 SVE.
* elf-bfd.h(elfcore_grok_aarch_sve): New declaration.
The disassembly mask for ldarh incorrectly didn't mask out bit 20 which
is part of the SBO part of the instruction and shouldn't be considered input.
This fixes the wrong bit fixing the disassembly of instructions to
ldarh and makes the behavior consistent.
opcodes/
PR binutils/23242
* aarch64-tbl.h (ldarh): Fix disassembly mask.
The previous constraints were based on information already in opcodes and it
seems that a few of them were wrong. I have now hand verified the ones changed
by the previous patch and corrected where needed.
This prevents a warning to be issued when one shouldn't be.
opcodes/
PR binutils/23369
* aarch64-opc.c (aarch64_sys_regs): Make read/write csselr_el1,
vsesr_el2, osdtrrx_el1, osdtrtx_el1, pmsidr_el1.
gas/testsuite/
PR binutils/23369
* gas/aarch64/msr.d (csselr_el1,
vsesr_el2, osdtrrx_el1, osdtrtx_el1, pmsidr_el1): New.
* gas/aarch64/msr.s: Likewise.
The test associated with the source file
gdb.base/share-env-with-gdbserver.c relies on calling malloc and free
within the inferior from GDB. However, as the test source itself
makes no use of these functions, there's no requirement that they be
linked into the test executable.
This commit adds a dummy call to malloc and free to ensure they are
linked into the test executable.
gdb/testsuite/ChangeLog:
* gdb.base/share-env-with-gdbserver.c (main): Add call to
malloc/free.
Fixes a number of build errors like the following
.../elf32-arm.c: In function 'elf32_arm_nabi_write_core_note':
.../elf32-arm.c:2177: error: #pragma GCC diagnostic not allowed inside functions
.../elf32-arm.c:2186: error: #pragma GCC diagnostic not allowed inside functions
See the comment in diagnostics.h.
include/
* diagnostics.h: Comment on macro usage.
bfd/
* elf32-arm.c (elf32_arm_nabi_write_core_note): Don't use
DIAGNOTIC_PUSH and DIAGNOSTIC_POP unconditionally.
* elf32-ppc.c (ppc_elf_write_core_note): Likewise.
* elf32-s390.c (elf_s390_write_core_note): Likewise.
* elf64-ppc.c (ppc64_elf_write_core_note): Likewise.
* elf64-s390.c (elf_s390_write_core_note): Likewise.
* elfxx-aarch64.c (_bfd_aarch64_elf_write_core_note): Likewise.
This patch silences this warning:
/Users/simark/src/binutils-gdb/gdb/darwin-nat.c:839:10: error: 'syscall' is deprecated: first deprecated in macOS 10.12 - syscall(2) is unsupported; please switch to a supported interface. For SYS_kdebug_trace use kdebug_signpost(). [-Werror,-Wdeprecated-declarations]
res = syscall (SYS___pthread_kill, thread->gdb_port, nsignal);
^
/usr/include/unistd.h:745:6: note: 'syscall' has been explicitly marked deprecated here
int syscall(int, ...);
^
The comment of the new pthread_kill function explains why we use the
syscall function directly.
include/ChangeLog:
* diagnostics.h (DIAGNOSTIC_IGNORE_DEPRECATED_DECLARATIONS):
Define for clang.
gdb/ChangeLog:
* darwin-nat.c (darwin_pthread_kill): New function.
(darwin_resume_thread): Use darwin_pthread_kill.
bfd/
* config.bfd (riscv32*-*-*): Renamed from riscv32-*-*.
(riscv64*-*-*): Likewise.
(riscv-*-*): Add as an alias for riscv32*-*-*.
ld/
* configure.tgt (riscv-*-*): Add as an alias for riscv32*-*-*.
Replace two remaining spelled-out calls to `[istarget mips*-*-linux*]'
in `mips-elf.exp' with $linux_gnu, which is equivalent.
ld/
* testsuite/ld-mips-elf/mips-elf.exp: Replace remaining calls to
`[istarget mips*-*-linux*]' with $linux_gnu.
There is no need to generate x86 ISA properties with empty bits in
linker output.
bfd/
PR ld/23372
* elfxx-x86.c (_bfd_x86_elf_merge_gnu_properties): Remove x86
ISA properties with empty bits.
ld/
PR ld/23372
* testsuite/ld-i386/i386.exp: Run pr23372a and pr23372b.
* testsuite/ld-i386/pr23372a.d: New file.
* testsuite/ld-i386/pr23372a.s: Likewise.
* testsuite/ld-i386/pr23372b.d: Likewise.
* testsuite/ld-i386/pr23372b.s: Likewise.
* testsuite/ld-i386/pr23372c.s: Likewise.
* testsuite/ld-x86-64/pr23372a-x32.d: Likewise.
* testsuite/ld-x86-64/pr23372a.d: Likewise.
* testsuite/ld-x86-64/pr23372a.s: Likewise.
* testsuite/ld-x86-64/pr23372b-x32.d: Likewise.
* testsuite/ld-x86-64/pr23372b.d: Likewise.
* testsuite/ld-x86-64/pr23372b.s: Likewise.
* testsuite/ld-x86-64/pr23372c.s: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run pr23372a, pr23372a-x32,
pr23372b and pr23372b-x32.
When doing a combined build with the gcc and binutils-gdb repos, I run into
this build error in gdb:
...
gdb/macroexp.c: \
In function ‘void get_next_token_for_substitution(macro_buffer*, \
macro_buffer*, char**, macro_buffer*, char**, int*, bool*)’:
gdb/macroexp.c:925:17: error: \
implicitly-declared ‘constexpr macro_buffer& \
macro_buffer::operator=(const macro_buffer&)’ is deprecated \
[-Werror=deprecated-copy]
*token = *lookahead;
...
Wdeprecated-copy is a new gcc warning added after gcc 8.
This patch fixes the build error by adding an explicit copy operator to the
macro_buffer class. I've added asserts to ensure that both the dest and src
of the copy are shared, in other words, neither is owner of the text pointer.
I've run the gdb testsuite on x86_64-linux and the asserts did not trigger.
2018-07-05 Tom de Vries <tdevries@suse.de>
* macroexp.c (macro_buffer) <operator=>: New member function.
And report the two input files that are incompatible rather than
reporting that an input file is incompatible with the output.
bfd/
* elf-bfd.h (_bfd_elf_ppc_merge_fp_attributes): Update prototype.
* elf32-ppc.c (_bfd_elf_ppc_merge_fp_attributes): Return error
on mismatch. Remove "warning: " from messages. Track last bfd
used to set tags.
(ppc_elf_merge_obj_attributes): Likewise. Handle status from
_bfd_elf_ppc_merge_fp_attributes.
* elf64-ppc.c (ppc64_elf_merge_private_bfd_data): Handle status
from _bfd_elf_ppc_merge_fp_attributes.
ld/
* testsuite/ld-powerpc/attr-gnu-4-12.d: Update expected output.
* testsuite/ld-powerpc/attr-gnu-4-13.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-21.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-23.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-31.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-32.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-8-23.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-12-21.d: Likewise.
Commit a50c11c666 was intended to use exit_inferior in
darwin_attach_pid, but I accidentally pushed the wrong version of the
patch. This fixes the problem.
gdb/ChangeLog
2018-07-04 Tom Tromey <tom@tromey.com>
* darwin-nat.c (darwin_attach_pid): Use exit_inferior.
This patch gets rid of this warning on macOS:
CXX main.o
/Users/simark/src/binutils-gdb/gdb/main.c:492:27: error: 'sbrk' is deprecated [-Werror,-Wdeprecated-declarations]
lim_at_start = (char *) sbrk (0);
^
/usr/include/unistd.h:585:1: note: 'sbrk' has been explicitly marked deprecated here
__deprecated __WATCHOS_PROHIBITED __TVOS_PROHIBITED
^
/usr/include/sys/cdefs.h:176:37: note: expanded from macro '__deprecated'
#define __deprecated __attribute__((deprecated))
^
sbrk on macOS is not useful for our purposes, since sbrk(0) always
returns the same value. From what I read, brk/sbrk on macOS is just an
emulation, it always returns a pointer in a 4MB section reserved for
that.
So instead of letting users use "maint set per-command space on" and
print silly results, I think we should just disable that feature for
this platform (as we do for platforms that don't have sbrk).
I defined a HAVE_USEFUL_SBRK macro and used that instead of HAVE_SBRK.
gdb/ChangeLog:
* common/common-defs.h (HAVE_USEFUL_SBRK): Define.
* main.c: Use HAVE_USEFUL_SBRK instead of HAVE_SBRK.
* maint.c: Likewise.
* top.c: Likewise.
Now that the GDB 8.2 branch has been created, we can
bump the version number.
gdb/ChangeLog:
GDB 8.2 branch created (1b919490e8):
* version.in: Bump version to 8.2.50.DATE-git.
