* readelf.c (warn): New function - like elfcomm.c version but only
produces output if warnings are enabled.
(struct options): Add --lint and --enable-checks.
(usage): Add entry for --lint.
(parse_args): Handle -L. If checks are enabled but no dumps have
been selected then enable all dumps.
(process_section_headers): Replace long if-then-else sequence with
a switch. Add warning messages for empty SHT_REL, SHT_RELA and
SHT_PROGBITS sections.
(process_file): Do not complain if the file is an archive and lint
mode has been enabled.
* elfcomm.c (error): Make the function weak.
(warn): Likewise.
* NEWS: Mention the new feature.
* doc/binutils.texi: Document the new feature.
* dwarf.h (report_leb_status): Add file name and line number
parameters. Include them in the diagnostic output.
(READ_ULEB): Pass file and line number to report_leb_status.
(READ_SLEB): Likewise.
* dwarf.c (read_and_print_leb128): Pass file and line number to
report_leb_status.
* testsuite/binutils-all/readelf.exp: Add test of new feature.
* testsuite/binutils-all/zero-sec.s: New test source file.
* testsuite/binutils-all/zero-sec.r: Expected output from new
test.
PR 25611
PR 25614
* dwarf.h (DWARF2_Internal_LineInfo): Add li_address_size and
li_segment_size fields.
* dwarf.c (read_debug_line_header): Record the address size and
segment selector size values (if present) in the lineinfo
structure.
(display_formatted_table): Warn if the format count is empty but
the table itself is not empty.
Display the format count and entry count at the start of the table
dump.
(display_debug_lines_raw): Display the address size and segement
selector size fields, if present.
* testsuite/binutils-all/dw5.W: Update expected output.
gas * dwarf2dbg.c (DWARF2_FILE_TIME_NAME): Default to -1.
(DWARF2_FILE_SIZE_NAME): Default to -1.
(DWARF2_LINE_VERSION): Default to the current dwarf level or 3,
whichever is higher.
(DWARF2_LINE_MAX_OPS_PER_INSN): Provide a default value of 1.
(NUM_MD5_BYTES): Define.
(struct file entry): Add md5 field.
(get_filenum): Delete and replace with...
(get_basename): New function.
(get_directory_table_entry): New function.
(allocate_filenum): New function.
(allocate_filename_to_slot): New function.
(dwarf2_where): Use new functions.
(dwarf2_directive_filename): Add support for extended .file
pseudo-op.
(dwarf2_directive_loc): Allow the use of file number zero with
DWARF 5 or higher.
(out_file_list): Rename to...
(out_dir_and_file_list): Add DWARF 5 support.
(out_debug_line): Emit extra values into the section header for
DWARF 5.
(out_debug_str): Allow for file 0 to be used with DWARF 5.
* doc/as.texi (.file): Update the description of this pseudo-op.
* testsuite/gas/elf-dwarf-5-file0.s: Add more lines.
* testsuite/gas/elf-dwarf-5-file0.d: Update expected dump output.
* testsuite/gas/lns/lns-diag-1.l: Update expected error message.
* NEWS: Mention the new feature.
According to the riscv privilege spec, some CSR are only valid when rv32 or
the specific extension is set. We extend the DECLARE_CSR and DECLARE_CSR_ALIAS
to record more informaton we need, and then check whether the CSR is valid
according to these information. We report warning message when the CSR is
invalid, so we have a choice between error and warning by --fatal-warnings
option. Also, a --no-warn/-W option is used to turn the warnings off, if
people don't want the warnings.
gas/
* config/tc-riscv.c (enum riscv_csr_class): New enum. Used to decide
whether or not this CSR is legal in the current ISA string.
(struct riscv_csr_extra): New structure to hold all extra information
of CSR.
(riscv_init_csr_hash): New function. According to the DECLARE_CSR and
DECLARE_CSR_ALIAS, insert CSR extra information into csr_extra_hash.
Call hash_reg_name to insert CSR address into reg_names_hash.
(md_begin): Call riscv_init_csr_hashes for each DECLARE_CSR.
(reg_csr_lookup_internal, riscv_csr_class_check): New functions.
Decide whether the CSR is valid according to the csr_extra_hash.
(init_opcode_hash): Update 'if (hash_error != NULL)' as hash_error is
not a boolean. This is same as riscv_init_csr_hash, so keep the
consistent usage.
* testsuite/gas/riscv/csr-dw-regnums.d: Add -march=rv32if option.
* testsuite/gas/riscv/priv-reg.d: Add f-ext by -march option.
* testsuite/gas/riscv/priv-reg-fail-fext.d: New testcase. The source
file is `priv-reg.s`, and the ISA is rv32i without f-ext, so the
f-ext CSR are not allowed.
* testsuite/gas/riscv/priv-reg-fail-fext.l: Likewise.
* testsuite/gas/riscv/priv-reg-fail-rv32-only.d: New testcase. The
source file is `priv-reg.s`, and the ISA is rv64if, so the
rv32-only CSR are not allowed.
* testsuite/gas/riscv/priv-reg-fail-rv32-only.l: Likewise.
include/
* opcode/riscv-opc.h: Extend DECLARE_CSR and DECLARE_CSR_ALIAS to
record riscv_csr_class.
opcodes/
* riscv-dis.c (print_insn_args): Updated since the DECLARE_CSR is changed.
gdb/
* riscv-tdep.c: Updated since the DECLARE_CSR is changed.
* riscv-tdep.h: Likewise.
* features/riscv/rebuild-csr-xml.sh: Generate the 64bit-csr.xml without
rv32-only CSR.
* features/riscv/64bit-csr.xml: Regernated.
binutils/
* dwarf.c: Updated since the DECLARE_CSR is changed.
debuginfod is a lightweight web service that indexes ELF/DWARF
debugging resources by build-id and serves them over HTTP. This patch
enables objdump and readelf to query debuginfod servers when they are
otherwise not able to find separate debug files. Binutils can be built
with debuginfod using the --with-debuginfod configure option. This
requires that libdebuginfod be installed and found at configure time.
debuginfod is packaged with elfutils, starting with version 0.178. For
more information see https://sourceware.org/elfutils/.
toplevel* config/debuginfod.m4: New file. Add macro AC_DEBUGINFOD. Adds
new configure option --with-debuginfod.
* configure: Regenerate.
* configure.ac: Call AC_DEBUGINFOD.
binutils* Makefile.am (readelf_LDADD, objdump_LDADD): Add libdebuginfod.
* Makefile.in: Regenerate.
* NEWS: Update.
* config.in: Regenerate.
* configure: Regenerate.
* configure.ac: Call AC_DEBUGINFOD.
* doc/Makefile.in: Regenerate.
* doc/binutils.texi: Add section on using binutils
with debuginfod.
* dwarf.c (debuginfod_fetch_separate_debug_info): New function.
Query debuginfod servers for the target debug file.
(load_separate_debug_info): Call
debuginfod_fetch_separate_debug_info if configured with
debuginfod.
(load_separate_debug_files): Add file argument to
load_separate_debug_info calls.
* dwarf.h (get_build_id): Add declaration.
* objdump.c (get_build_id): New function. Get build-id of file.
* readelf.c (get_build_id): Likewise.
* testsuite/binutils-all/debuginfod.exp: New tests.
* testsuite/binutils-all/linkdebug.s: Add .note.gnu.build-id
section.
This patch catches and reports errors when reading leb128 values,
addressing a FIXME in read_leb128.
* dwarf.h (read_leb128): Update prototype.
(report_leb_status): New inline function.
(SKIP_ULEB, SKIP_SLEB, READ_ULEB, READ_SLEB): Define.
* dwarf.c: Use above macros throughout file. Formatting.
(read_leb128): Reorder params. Add status return param.
Don't stop reading until finding terminator or end of data.
Detect loss of significant bits. Sign extend only on
terminating byte.
(read_sleb128, read_uleb128): Delete functions.
(SKIP_ULEB, SKIP_SLEB, READ_ULEB, READ_SLEB): Delete macros.
(read_and_print_leb128): Rewrite.
(process_extended_line_op): Return a size_t. Use size_t vars.
Adjust to suit new macros. Add proper name size to "data" when
processing DW_LNE_define_file.
(process_abbrev_section): Adjust to suit new macros.
(decode_location_expression, skip_attr_bytes): Likewise.
(get_type_signedness): Likewise.
(read_and_display_attr_value): Likewise. Consolidate block code.
(process_debug_info): Adjust to suit new macros.
(display_formatted_table, display_debug_lines_raw): Likewise.
(display_debug_lines_decoded): Likewise. Properly check for end
of DW_LNS_extended_op.
(display_debug_macinfo): Adjust to suit new macros.
(get_line_filename_and_dirname, display_debug_macro): Likewise.
(display_view_pair_list): Likewise. Don't back off when hitting
end of data.
(display_loc_list): Adjust to suit new macros.
(display_loclists_list, display_loc_list_dwo): Likewise.
(display_debug_rnglists_list, read_cie): Likewise.
(display_debug_frames): Likewise.
* readelf.c: Use new ULEB macros throughout file.
(read_uleb128): Delete.
(decode_arm_unwind_bytecode): Use read_leb128.
(decode_tic6x_unwind_bytecode): Likewise.
(display_tag_value): Adjust to suit new macros.
(display_arc_attribute, display_arm_attribute): Likewise.
(display_gnu_attribute, display_power_gnu_attribute): Likewise.
(display_s390_gnu_attribute, display_sparc_gnu_attribute): Likewise.
(display_mips_gnu_attribute, display_tic6x_attribute): Likewise.
(display_msp430x_attribute, display_msp430_gnu_attribute): Likewise.
(display_riscv_attribute, process_attributes): Likewise.
This commit gives DWARF register numbers to the RISC-V CSRs inline
with the RISC-V ELF specification here:
https://github.com/riscv/riscv-elf-psabi-doc/blob/master/riscv-elf.md
The CSRs are defined being numbered from 4096 to 8191.
This adds support to the assembler, required in order to reference
CSRs in, for example .cfi directives.
I have then extended dwarf.c in order to support printing CSR names in
the dumped DWARF output. As the CSR name space is quite large and
only sparsely populated, I have provided a new function to perform
RISC-V DWARF register name lookup which uses a switch statement rather
than the table base approach that other architectures use.
Any CSR that does not have a known name will return a name based on
'csr%d' with the %d being replaced by the offset of the CSR from 4096.
gas/ChangeLog:
* config/tc-riscv.c (tc_riscv_regname_to_dw2regnum): Lookup CSR
names too.
* testsuite/gas/riscv/csr-dw-regnums.d: New file.
* testsuite/gas/riscv/csr-dw-regnums.s: New file.
binutils/ChangeLog:
* dwarf.c (regname_internal_riscv): New function.
(init_dwarf_regnames_riscv): Use new function.
Change-Id: I3f70bc24fa8b3c75744e6775eeeb87db70c7ecfb
Add a layer of indirection for DWARF register name lookup by
introducing a function pointer. Right now all targets use the same
table based implementation that they always have, however, this will
change in a later commit.
binutils/ChangeLog:
* dwarf.c (typedef dwarf_regname_lookup_ftype): New typedef.
(dwarf_regnames_lookup_func): New static global.
(init_dwarf_regnames_i386): Set dwarf_regnames_lookup_func.
(init_dwarf_regnames_iamcu): Likewise.
(init_dwarf_regnames_x86_64): Likewise.
(init_dwarf_regnames_aarch64): Likewise.
(init_dwarf_regnames_s390): Likewise.
(init_dwarf_regnames_riscv): Likewise.
(init_dwarf_regnames_by_elf_machine_code): Reset
dwarf_regnames_lookup_func to NULL.
(init_dwarf_regnames_by_bfd_arch_and_mach): Likewise.
(regname_internal_by_table_only): New function.
(regname): Make use of dwarf_regnames_lookup_func.
Change-Id: Ibbff61c0abea32927f35c9e478793039ab8bb57d
The architecture specific register name initialisation routines no
longer need to be externally visible, so make them static.
binutils/ChangeLog:
* dwarf.c (init_dwarf_regnames_i386): Make static.
(init_dwarf_regnames_iamcu): Make static.
(init_dwarf_regnames_x86_64): Make static.
(init_dwarf_regnames_aarch64): Make static.
(init_dwarf_regnames_s390): Make static.
(init_dwarf_regnames_riscv): Make static.
* dwarf.h (init_dwarf_regnames_i386): Delete declaration.
(init_dwarf_regnames_iamcu): Delete declaration.
(init_dwarf_regnames_x86_64): Delete declaration.
(init_dwarf_regnames_aarch64): Delete declaration.
(init_dwarf_regnames_s390): Delete declaration.
(init_dwarf_regnames_riscv): Delete declaration.
Change-Id: I9e350f76f98f46e9e3dd88d502f2a2a83e44cb36
Adds a new API function init_dwarf_regnames_by_bfd_arch_and_mach to
initialise the register name state from a BFD architecture and machine
type.
There should be no user visible changes after this commit.
binutils/ChangeLog:
* dwarf.c (init_dwarf_regnames_by_bfd_arch_and_mach): New
function.
* dwarf.h (init_dwarf_regnames_by_bfd_arch_and_mach): Declare.
* objdump.c (dump_dwarf): Call new function instead of calling
specific initialization routines. Restrucure so that eh_addr_size
is still calculated correctly.
Change-Id: I346d665d2079a18ec4d04bd41893d0e9dc05e4b3
As part of a process to change how dwarf.c figures out the correct
name for a register I wanted to clean up how we initialise the
register name tracking state.
As part of this I rename init_dwarf_regnames to
init_dwarf_regnames_by_elf_machine_code, later commits will add a
different entry point to initialise the register name state.
There should be no user visible changes after this commit.
binutils/ChangeLog:
* dwarf.c (init_dwarf_regnames): Renamed to...
(init_dwarf_regnames_by_elf_machine_code): ...this.
* dwarf.h (init_dwarf_regnames): Renamed to...
(init_dwarf_regnames_by_elf_machine_code): ...this.
* readelf.c (process_file_header): Update call to use new name.
Change-Id: Ic8d2ef5fb62a8590ecd8cbb7e6258e11c6263594
Currently if a target has a large ( > 1024 ) number of registers then
we get a warning when dumping the DWARF whenever a register over the
1024 limit is referenced, this occurs in dwarf.c:frame_need_space.
This check was initially introduced to guard against corrupted DWARF
referencing stupidly large numbers of registers.
The frame_need_space function already has a check in place so that, if
a target specifies a set of known DWARF register names then we must
only reference a register within this set, it is only after this check
that we check for the 1024 limit.
What this means is that if a target DOES NOT define a set of known
register names and if we reference more than 1024 registers
frame_need_space will give a warning.
If a target DOES define a set of known registers and there are more
than 1024 defined registers, and we try to reference a register beyond
1024 we will again get an error.
This second case feels wrong to me. My thinking is that if a target
defines a set of registers then it is not unreasonable to assume the
tools can cope with that number of registers. And so, if the target
defines 2000 named DWARF registers, frame_need_space should allow
access to all of these registers.
If a target does not define a set of named registers then the 1024
limit should remain. This is pretty arbitrary, but we do need to have
some limit in place I think, so for now that seems as good as any.
This is an entirely theoretical fix - there are no targets that define
such large numbers of registers, but while experimenting with adding
support for RISC-V CSRs I ran into this issue and felt like it was a
good improvement.
binutils/ChangeLog:
* dwarf.c (frame_need_space): Compare dwarf_regnames_count against
0, and only warn about large numbers of registers if the number is
more than the dwarf_regnames_count.
Change-Id: Ifac1a999ff0677676e81ee373c4c044b6a700827
Pointer comparisons after adding an offset just don't work to catch
overflow when the offset is a larger type than the pointer.
PR 25018
* dwarf.c (get_type_signedness): Delete ineffective pointer
comparison check. Properly range check uvalue offset on
recursive call.
(read_and_display_attr_value): Range check uvalue offset before
calling get_type_signedness.
I don't see a need to calculate "ptr = start + uvalue" then compare
"ptr" with "start" and "end". Given "start <= end" on entry, the
"uvalue" comparison with "max_uvalue" ought to be sufficient to ensure
"start + uvalue" is bounded by "start" and "end" regardless of the
size of pointers and the unsigned dwarf_vma integer type.
* dwarf.c (check_uvalue): Remove unnecessary pointer checks.
PR 24829
* dwarf.c (check_uvalue): New function. Ensures that a block's
size is valid.
(read_and_display_attr_value): Use check_value when processsing
DW_FORM_block<n> attributes.
Given 32-bit pointers and a 64-bit bfd_size_type, it is relatively
easy to construct a value of augmentation_data_len (eg. 0x100000000)
that won't fail pointer checks but will print without bounds.
PR 24898
* dwarf.c (display_debug_frames): Use the read_cie check and error
for augmentation data length.
PR 24798
* dwarf.c (process_cu_tu_index): Avoid integer overflow on 64-bit
systems by casting ncols and nslots expressions to size_t. Display
number of columns and slots before giving up due to buffer overflow.
Use %u to display unsigned ints. Perform more pointer wrap tests.
PR 24818
* objdump.c (is_relocateable): Delete.
(load_specific_debug_section): Test the abfd for relocations
directly, rather than relying upon is_relocateable.
(dump_dwarf): Delete initlialization of is_relocateable.
The SVE DRAWF register names are missing from binutils, this may cause objdump
and readelf to ignore certain DRAWF output as the registers are unknown (most
notably CIEs).
This patch adds the registers in accordance to the "DWARF for ARM(r) 64-bit
Architecture (AARch64) with SVE support" documentation [1].
[1] https://developer.arm.com/docs/100985/latest/dwarf-for-the-arm-64-bit-architecture-aarch64-with-sve-support
binutils/ChangeLog:
* dwarf.c (dwarf_regnames_aarch64): Add SVE registers.
* testsuite/binutils-all/aarch64/sve-dwarf-registers.d: New test.
* testsuite/binutils-all/aarch64/sve-dwarf-registers.s: New test.
* objdump.c (sym_ok): New function.
(find_symbol_for_address): Use new function.
(disassemble_section): Compare sections by name, not pointer.
(dump_dwarf): Move code to initialise byte_get pointer and iterate
over separate debug files from here to ...
(dump_bfd): ... here. Add parameter indicating that a separate
debug info file is being dumped. For main file, pull in the
symbol tables from all separate debug info files.
(display_object): Update call to dump_bfd.
* doc/binutils.texi: Document extened behaviour of the
--dwarf=follow-links option.
* NEWS: Mention this new feature.
* testsuite/binutils-all/objdump.WK2: Update expected output.
* testsuite/binutils-all/objdump.exp (test_follow_debuglink): Add
options and dump file parameters.
Add extra test.
* testsuite/binutils-all/objdump.WK3: New file.
* testsuite/binutils-all/readelf.exp: Change expected output for
readelf -wKis test.
* testsuite/binutils-all/readelf.wKis: New file.
PR 23843
* dwarf.h (struct separate_info): New structure for containing
information on separate debug info files.
* dwarf.c (struct dwo_info): New structure for containing dwo
links.
(first_dwo_info): Chain of dwo_info structures.
(first_separate_file): Chain of separate_info structures.
(separate_debug_file, separate_debug_filename): Delete.
(fetch_alt_indirect_string): Scan all separate debug info files
for the requested string.
(add_dwo_info): New function.
(add_dwo_name): New function.
(add_dwo_dir): New function.
(add_dwo_id: New function.
(free_dwo_info): New function.
(read_and_display_attr_value): Store DWO data using the new
functions.
(load_debug_section_with_follow): If necessary, scan the list of
separate debug info files for the requested section.
(add_separate_debug_file): New function.
(load_separate_debug_info): Call add_separate_debug_file to store
the information on the newly loaded file.
(load_dwo_file): Likewise.
(load_separate_debif_file): Rename to load_separate_debug_files.
Change return type to boolean. If following links then attempt to
load all separate debug info files, not just the first one.
(free_debug_memory): Release memory in dwo_info and separate_info
chains.
* objdump.c (dump_dwarf): Iterate over all loaded debg info files.
* readelf.c (process_object): Likewise.
* doc/debug.options.texi: Update descriptions of links and
follow-links options.
* testsuite/binutils-all/objdump.WK2: Update expected output.
* testsuite/binutils-all/readelf.k2: Likewise.
* NEWS: Announce the new feature.
binutils/
* dwarf.c (display_debug_lines_decoded): Add display of is_stmt.
* testsuite/binutils-all/dw5.W: Deal with the consequences.
* testsuite/binutils-all/objdump.WL: Deal with the consequences.
As indicated by the subject, this patch adds support for the DWARF
expression opcode DW_OP_GNU_variable_value to readelf.
It's pretty much a copy/paste of DW_OP_call_ref with the obvious name
changes for the printf statements. The FIXME comment comes from that
copy/paste.
binutils/ChangeLog:
* dwarf.c (decode_location_expresion): Add case for
DW_OP_GNU_variable_value.
* objcopy.c (add_specific_symbols): Free buffer on exit.
(add_redefine_syms_file): Close file handle on exit.
(copy_object): Close file handle on early exit.
Free buffer on early exit.
Free gaps buffers once they are no longer needed.
* dwarf.c (display_debug_frames): Free allocated memory on exit.
(load_separate_debug_info): Free allocate memory on early exit.
I happened to notice that objdump was not printing "Rust" when showing
the DW_AT_language for a CU:
<10> DW_AT_language : 28 (Unknown: 1c)
This patch adds all the new language constants from DWARF 5 to
binutils/dwarf.c.
2018-04-06 Tom Tromey <tom@tromey.com>
* dwarf.c (read_and_display_attr_value): Add missing DW_LANG
constants from DWARF 5.
Adds a register name table for RiscV so that objdump and readelf can
both use better register names.
binutils/ChangeLog:
* dwarf.c (dwarf_regnames_riscv): New register name table.
(init_dwarf_regnames_riscv): New function.
(init_dwarf_regnames): Add call to initialise RiscV register
names.
* dwarf.h (init_dwarf_regnames_riscv): Declare.
* objdump.c (dump_dwarf): Add call to initialise RiscV register
names.
PR 22532
* dwarf.c (read_and_display_attr_value): Add attributes that might
use the DW_FORM_exprloc form, and if so, display the decoded
location expression list.
This fixed the build with GCC 4.2:
cc1: warnings being treated as errors
binutils-gdb/binutils/dwarf.c: In function ‘load_separate_debug_info’:
binutils-gdb/binutils/dwarf.c:9650: warning: declaration of ‘link’ shadows a global declaration
/usr/include/unistd.h:757: warning: shadowed declaration is here
* dwarf.c (load_separate_debug_info): Rename argument name from
link to xlink.
* dwarf.c (dwo_name, dwo_dir, dwo_id, dwo_id_len): New variables.
(read_and_display_attr_value): Record dwo variables if requested.
(display_augmentation_data): Rename to display_data and make
generic.
(load_dwo_file): New function. Loads a separate dwarf object
file.
(load_separate_debug_file): Add reporting and loading of separate
dwarf objet files.
* readelf.c (process_section_headers): Add do_debug_links to list
of flags requiring a debug dump.
(display_debug_section): Tidy up code.
* doc/debug.options.texi: Add note that dwo links will also be
followed.
* testsuite/binutils-all/debuglink.s: Tidy code.
* testsuite/binutils-all/dwo.s: New test file.
* testsuite/binutils-all/readelf.wk2: New file - expected output
from readelf.
* testsuite/binutils-all/readelf.exp: Run the new test.
Hi Guys,
I am applying the rather large patch attached to this email to enhance
the readelf and objdump programs so that they now have the ability to
follow links to separate debug info files. (As requested by PR
15152). So for example whereas before we had this output:
$ readelf -wi main.exe
Contents of the .debug_info section:
[...]
<15> DW_AT_comp_dir : (alt indirect string, offset: 0x30c)
[...]
With the new option enabled we get:
$ readelf -wiK main.exe
main.exe: Found separate debug info file: dwz.debug
Contents of the .debug_info section (loaded from main.exe):
[...]
<15> DW_AT_comp_dir : (alt indirect string, offset: 0x30c) /home/nickc/Downloads/dwzm
[...]
The link following feature also means that we can get two lots of
output if the same section exists in both the main file and the
separate debug info file:
$ readelf -wiK main.exe
main.exe: Found separate debug info file: dwz.debug
Contents of the .debug_info section (loaded from main.exe):
[...]
Contents of the .debug_info section (loaded from dwz.debug):
[...]
The patch also adds the ability to display the contents of debuglink
sections:
$ readelf -wk main.exe
Contents of the .gnu_debugaltlink section:
Separate debug info file: dwz.debug
Build-ID (0x14 bytes):
c4 a8 89 8d 64 cf 70 8a 35 68 21 f2 ed 24 45 3e 18 7a 7a 93
Naturally there are long versions of these options (=follow-links and
=links). The documentation has been updated as well, and since both
readelf and objdump use the same set of debug display options, I have
moved the text into a separate file. There are also a couple of new
binutils tests to exercise the new behaviour.
There are a couple of missing features in the current patch however,
although I do intend to address them in follow up submissions:
Firstly the code does not check the build-id inside separate debug
info files when it is searching for a file specified by a
.gnu_debugaltlink section. It just assumes that if the file is there,
then it contains the information being sought.
Secondly I have not checked the DWARF-5 version of these link
features, so there will probably be code to add there.
Thirdly I have only implemented link following for the
DW_FORM_GNU_strp_alt format. Other alternate formats (eg
DW_FORM_GNU_ref_alt) have yet to be implemented.
Lastly, whilst implementing this feature I found it necessary to move
some of the global variables used by readelf (eg section_headers) into
a structure that can be passed around. I have moved all of the global
variables that were necessary to get the patch working, but I need to
complete the operation and move the remaining, file-specific variables
(eg dynamic_strings).
Cheers
Nick
binutils PR 15152
* dwarf.h (enum dwarf_section_display_enum): Add gnu_debuglink,
gnu_debugaltlink and separate_debug_str.
(struct dwarf_section): Add filename field.
Add prototypes for load_separate_debug_file, close_debug_file and
open_debug_file.
* dwarf.c (do_debug_links): New.
(do_follow_links): New.
(separate_debug_file, separate_debug_filename): New.
(fetch_alt_indirect_string): New function. Retrieves a string
from the debug string table in the separate debug info file.
(read_and_display_attr_value): Use it with DW_FORM_GNU_strp_alt.
(load_debug_section_with_follow): New function. Like
load_debug_section, but if the first attempt fails, then tries
again in the separate debug info file.
(introduce): New function.
(process_debug_info): Use load_debug_section_with_follow and
introduce.
(load_debug_info): Likewise.
(display_debug_lines_raw): Likewise.
(display_debug_lines_decoded): Likewise.
(display_debug_macinfo): Likewise.
(display_debug_macro): Likewise.
(display_debug_abbrev): Likewise.
(display_debug_loc): Likewise.
(display_debug_str): Likewise.
(display_debug_aranges): Likewise.
(display_debug_addr); Likewise.
(display_debug_frames): Likewise.
(display_gdb_index): Likewise.
(process_cu_tu_index): Likewise.
(load_cu_tu_indexes): Likewise.
(display_debug_links): New function. Displays the contents of a
.gnu_debuglink or .gnu_debugaltlink section.
(calc_gnu_debuglink_ctc32):New function. Calculates a CRC32
value.
(check_gnu_debuglink): New function. Checks the CRC of a
potential separate debug info file.
(parse_gnu_debuglink): New function. Reads a CRC value out of a
.gnu_debuglink section.
(check_gnu_debugaltlink): New function.
(parse_gnu_debugaltlink): New function. Reads the build-id value
out of a .gnu_debugaltlink section.
(load_separate_debug_info): New function. Finds and loads a
separate debug info file.
(load_separate_debug_file): New function. Attempts to find and
follow a link to a separate debug info file.
(free_debug_memory): Free the separate debug info file
information.
(opts_table): Add "follow-links" and "links".
(dwarf_select_sections_by_letters): Add "k" and "K".
(debug_displays): Reformat. Add .gnu-debuglink and
.gnu_debugaltlink.
Add an extra entry for .debug_str in a separate debug info file.
* doc/binutils.texi: Move description of debug dump features
common to both readelf and objdump into...
* objdump.c (usage): Add -Wk and -WK.
(load_specific_debug_section): Initialise the filename field in
the dwarf_section structure.
(close_debug_file): New function.
(open_debug_file): New function.
(dump_dwarf): Load and dump the separate debug info sections.
* readelf.c (struct filedata): New structure. Contains various
variables that used to be global:
(current_file_size, string_table, string_table_length, elf_header)
(section_headers, program_headers, dump_sects, num_dump_sects):
Move into filedata structure.
(cmdline): New global variable. Contains list of sections to dump
by number, as specified on the command line.
Add filedata parameter to most functions.
(load_debug_section): Load the string table if it has not already
been retrieved.
(close_file): New function.
(close_debug_file): New function.
(open_file): New function.
(open_debug_file): New function.
(process_object): Process sections in any separate debug info files.
* doc/debug.options.texi: New file. Add description of =links and
=follow-links options.
* NEWS: Mention the new feature.
* elfcomm.c: Have the byte gte functions take a const pointer.
* elfcomm.h: Update prototypes.
* testsuite/binutils-all/dw5.W: Update expected output.
* testsuite/binutils-all/objdump.WL: Update expected output.
* testsuite/binutils-all/objdump.exp: Add test of -WK and -Wk.
* testsuite/binutils-all/readelf.exp: Add test of -wK and -wk.
* testsuite/binutils-all/readelf.k: New file.
* testsuite/binutils-all/objdump.Wk: New file.
* testsuite/binutils-all/objdump.WK2: New file.
* testsuite/binutils-all/linkdebug.s: New file.
* testsuite/binutils-all/debuglink.s: New file.
gas * testsuite/gas/avr/large-debug-line-table.d: Update expected
output.
* testsuite/gas/elf/dwarf2-11.d: Likewise.
* testsuite/gas/elf/dwarf2-12.d: Likewise.
* testsuite/gas/elf/dwarf2-13.d: Likewise.
* testsuite/gas/elf/dwarf2-14.d: Likewise.
* testsuite/gas/elf/dwarf2-15.d: Likewise.
* testsuite/gas/elf/dwarf2-16.d: Likewise.
* testsuite/gas/elf/dwarf2-17.d: Likewise.
* testsuite/gas/elf/dwarf2-18.d: Likewise.
* testsuite/gas/elf/dwarf2-5.d: Likewise.
* testsuite/gas/elf/dwarf2-6.d: Likewise.
* testsuite/gas/elf/dwarf2-7.d: Likewise.
ld * testsuite/ld-avr/gc-section-debugline.d: Update expected
output.
PR 22386
* dwarf.c (read_cie): Use bfd_size_type for
augmentation_data_len.
(display_augmentation_data): New function.
(display_debug_frames): Use it.
Check for integer overflow when testing augmentation_data_len.
When displaying the .debug_frame section, the register numbers in the
DW_CFA_def_cfa* statements are read as signed numbers. I have come
across a target that has register 121, encoded as 0x79 in unsigned LEB128.
Interpreting this as signed results in -7, which makes readelf display
"r-7".
The DWARF5 standard (6.4.2.2) states that the register numbers should be
treated as unsigned LEB128.
Simply replacing READ_SLEB with READ_ULEB resulted in warnings like
these:
/home/emaisin/src/binutils-gdb/binutils/dwarf.c: In function ‘display_debug_frames’:
/home/emaisin/src/binutils-gdb/binutils/dwarf.c:355:17: error: comparison between signed and unsigned integer expressions [-Werror=sign-compare]
if ((var) != _val) \
^
/home/emaisin/src/binutils-gdb/binutils/dwarf.c:7866:8: note: in expansion of macro ‘READ_ULEB’
READ_ULEB (fc->cfa_reg);
^
... so I also changed Frame_Chunk::cfa_reg to an unsigned int.
binutils/ChangeLog:
* dwarf.c (struct Frame_Chunk) <cfa_reg>: Change type to
unsigned int.
(display_debug_frames): Read CFA reg as an unsigned number.
This patch tidies DWARF header checks, consolidating the "negative"
checks (which are really overflow checks) with the section size
check. In a number of cases this also ensures that small negative
lengths are caught. For instance
hdrptr = start + arange.ar_length + initial_length_size;
if (hdrptr < start || hdrptr > end)
does not detect ar_length in the range [-initial_length_size,-1].
* dwarf.c (process_debug_info): Consolidate header length checks.
(display_debug_pubnames_worker): Use "start" to read header.
Properly check header length and report errors earlier.
Simplify loop printing pubnames.
(get_line_filename_and_dirname): Catch small negative "length"
values.
(display_debug_aranges): Likewise. Report header errors
earlier using standardized message.
(display_debug_names): Likewise.
Pointer comparisons have traps for the unwary. After adding a large
unknown value to "start", the test "start < end" depends on where
"start" is originally in memory.
PR 22239
* dwarf.c (read_cie): Don't compare "start" and "end" pointers
after adding a possibly wild length to "start", compare the length
to the difference of the pointers instead. Remove now redundant
"negative" length test.
Preprocessor tokens like DWARF_VMA_FMT and BFD_VMA_FMT are not
understood by gettext, and cause the translation string to be
truncated. Even if it were not truncated, we wouldn't want a value
that changes depending on host or configure options to be put in a
translation string.
PR 21732
* dwarf.c (READ_ULEB): Don't use DWARF_VMA_FMT in translated string.
(READ_SLEB): Likewise.
* readelf.c (bfd_vmatoa): New function.
(get_data, get_dynamic_data): Use it for printing error messages.
When dumping location lists, also dump locview lists that may be
interspersed with them, and bring view pairs next to the corresponding
location list entries.
This patch supports DW_AT_GNU_locviews as a separate attribute for
DWARF4- loc_lists and split (dwo) loclists, as well as DWARF5
loclists.
It also supports, in DWARF5 loclists, the proposed
DW_LLE_GNU_view_pair loclist entry type proposed for DWARF6.
The tests use 32-bit DWARF, even on 64-bit targets, resolving offsets
to constants so as to reduce the risk that relocations be created for
them, or that the offsets be rejected as nonconstants.
The patch also adds an xfail to an unrelated test, namely dw5, so that
no unexpected fails remain on nds32*-elf, one of the tested targets.
Reviewed-by: Alan Modra <amodra@gmail.com>
for include/ChangeLog
* dwarf2.def (DW_AT_GNU_locviews): New.
* dwarf2.h (enum dwarf_location_list_entry_type): Add
DW_LLE_GNU_view_pair.
(DW_LLE_view_pair): Define.
for binutils/ChangeLog
* dwarf.h (debug_info): Add loc_views and num_loc_views.
* dwarf.c (vm1): New constant.
(print_dwarf_view): New function.
(read_and_display_attr_value): Support DW_AT_GNU_locviews.
(process_debug_info): Keep num_loc_offsets and num_loc_views
in sync.
(display_view_pair_list): New function.
(display_loc_list_dwo): Take vstart_ptr; update it. Dump
location view pairs before the range they apply to, when a
viewlist augments the loc list.
(display_loc_list): Likewise. Check view numbers in range
tests.
(display_loclists_list): Likewise. Handle view pair entries,
and warn on trailing ones.
(loc_views): New variable.
(loc_offsets_compar): Compare loc_views if loc_offsets are the
same.
(display_debug_loc): Check and sort loc_views too. Accept
loc_view as expected_start. Skip if lists and views are the
same. Dump locview list separately in order, and pass the
locview list base to each list dump function. Warn and skip
overlap and hole checking if we find loclists and locviews to
not be adjacent.
* testsuite/binutils-all/locview-1.s: New.
* testsuite/binutils-all/readelf.locview-1: New.
* testsuite/binutils-all/locview-2.s: New.
* testsuite/binutils-all/readelf.locview-2: New.
* testsuite/binutils-all/readelf.exp: Run new tests. Fix
option spelling in pr18374 fail message. XFAIL dw5 test on
nds32*-elf.
bfd * elf32-xtensa.c (elf_xtensa_get_plt_section): Increase length of
plt_name buffer.
(elf_xtensa_get_gotplt_section): Increase length of got_name
buffer.
* mach-o-arm.c (bfd_mach_o_arm_canonicalize_one_reloc): Add a
default return of FALSE.
* mach-o-i386.c (bfd_mach_o_i386_canonicalize_one_reloc): Add a
default return of FALSE.
binutils * dwarf.c (dwarf_vmatoa_1): Do not pass a NULL string pointer to
sprintf.
* srconv.c (walk_tree_type): Initialise the spare field of the
IT_dty structure.
gas * config/tc-pru.c (md_assemble): Add continue statement after
handling 'E' operand character.
* config/tc-v850.c (md_assemble): Initialise the 'insn' variable.
Fix GCC 4.2 warnings like:
cc1: warnings being treated as errors
binutils-gdb/bfd/dwarf2.c:1844: warning: declaration of ‘time’ shadows a global declaration
/usr/include/time.h:187: warning: shadowed declaration is here
binutils-gdb/bfd/dwarf2.c: In function ‘line_info_add_file_name’:
binutils-gdb/bfd/dwarf2.c:1854: warning: declaration of ‘time’ shadows a global declaration
/usr/include/time.h:187: warning: shadowed declaration is here
bfd/
* dwarf2.c (line_info_add_include_dir_stub): Replace time with
xtime.
(line_info_add_file_name): Likewise.
(decode_line_info): Likewise.
binutils/
* dwarf.c (display_debug_names): Replace index with xindex.
Use DWARF_VMA_FMT to report error to work for both 32-bit and 64-bit
builds.
* dwarf.c (READ_ULEB): Use DWARF_VMA_FMT to report error.
(READ_SLEB): Likewise.
PR binutils/21648
* dwarf.c (LEB): Rename to SKIP_ULEB and READ_ULEB. Add check for
reading a value that is too big for the containing variable.
(SLEB): Rename to SKIP_SLEB and READ_SLEB. Add similar check.
Replace uses of LEB and SLEB with appropriate new macro.
(display_debug_frames): Use an unsigned int for the 'reg'
variable. Use a signed long for the 'l' variable.
PR binutils/21438
* dwarf.c (process_extended_line_op): Do not assume that the
string extracted from the section is NUL terminated.
(fetch_indirect_string): If the string retrieved from the section
is not NUL terminated, return an error message.
(fetch_indirect_line_string): Likewise.
(fetch_indexed_string): Likewise.
binutils/
2017-02-27 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix compilation with GCC 4.4.7.
* dwarf.c (display_loclists_list, display_debug_rnglists_list):
Initialize begin and end.
binutils/
2017-02-23 Jan Kratochvil <jan.kratochvil@redhat.com>
* dwarf.c (decode_location_expression): Support DW_OP_implicit_pointer,
DW_OP_const_type, DW_OP_regval_type, DW_OP_deref_type, DW_OP_convert
and DW_OP_reinterpret.
(read_and_display_attr_value): Support DW_AT_call_value,
DW_AT_call_data_value, DW_AT_call_target and
DW_AT_call_target_clobbered.
binutils/
2017-02-23 Jan Kratochvil <jan.kratochvil@redhat.com>
* dwarf.c (fetch_indirect_line_string): New function.
(abbrev_attr): New field implicit_const.
(add_abbrev_attr): New parameter implicit_const.
(process_abbrev_section): Support DW_FORM_implicit_const.
(decode_location_expression): Support DW_OP_entry_value.
(read_and_display_attr_value): Add parameter implicit_const. Support
DW_FORM_line_strp and DW_FORM_implicit_const.
(read_and_display_attr): Add parameter implicit_const.
(process_debug_info): Support line_str and DWARF-5.
(read_debug_line_header): Support DWARF-5.
(display_formatted_table): New function.
(display_debug_lines_raw): New parameter file. Support DWARF-5.
(display_debug_lines_decoded): New parameter fileptr. Support DWARF-5.
(display_debug_lines): Pass file parameter.
(display_debug_macro): Update read_and_display_attr_value caller.
(display_debug_abbrev): Support DW_FORM_implicit_const.
(display_loclists_list): New function.
(display_loc_list): Support .debug_loclists.
(display_debug_ranges_list): New function from display_debug_ranges.
(display_debug_rnglists_list): New function.
(display_debug_ranges): Support .debug_rnglists.
(debug_displays): Add .debug_line_str, .debug_loclists and
.debug_rnglists.
* dwarf.h: Include dwarf2.h
(DWARF2_Internal_LineInfo): Add li_offset_size.
(DWARF2_Internal_CompUnit): Add cu_unit_type.
(enum dwarf_section_display_enum): Add line_str.
* readelf.c (process_section_headers): Add rnglists and loclists.
binutils/
2017-02-23 Jan Kratochvil <jan.kratochvil@redhat.com>
* dwarf.c (display_loc_list): Use dwarf_vma for offset, base_address
and off.
(display_loc_list_dwo): Use dwarf_vma for offset.
(display_debug_loc): Use dwarf_vma for offset, base_address.
(struct range_entry, range_entry_compar): Use dwarf_vma for
ranges_offset.
(display_debug_ranges): Use dwarf_vma for ranges_offset, offset and
base_address.
PR binutils/21156
* dwarf.c (cu_tu_indexes_read): Move into...
(load_cu_tu_indexes): ... here. Change the variable into
tri-state. Change the function into boolean, returning
false if the indicies could not be loaded.
(find_cu_tu_set): Return NULL if the indicies could not be
loaded.
On S/390 we see quite often registers marked as "bad register" in the
readelf --debug-dump=frames or objdump -Wf output.
00000000 0000000000000014 00000000 CIE
Version: 1
Augmentation: "zR"
Code alignment factor: 1
Data alignment factor: -8
Return address column: 14
Augmentation data: 1b
DW_CFA_def_cfa: r15 ofs 160
DW_CFA_nop
DW_CFA_nop
DW_CFA_nop
...
00000050 000000000000001c 00000054 FDE cie=00000000 pc=0000000080000e58..0000000080000e84
DW_CFA_advance_loc: 6 to 0000000080000e5e
DW_CFA_offset: r14 at cfa-48
DW_CFA_offset: r15 at cfa-40
DW_CFA_advance_loc: 6 to 0000000080000e64
DW_CFA_def_cfa_offset: 320
DW_CFA_advance_loc: 18 to 0000000080000e76
DW_CFA_restore: bad register: r15 <------
DW_CFA_restore: r14
DW_CFA_def_cfa_offset: 160
This is triggered by this check in display_debug_frames (dwarf.c):
case DW_CFA_restore:
if (opa >= (unsigned int) cie->ncols
|| opa >= (unsigned int) fc->ncols)
reg_prefix = bad_reg;
cie->ncols is number of registers referenced in the CIE which is 15 due
to r14 being given as return address column. So for the CFA_restore of
r15 a "bad register" is being printed while the same rule on r14 is ok.
The reason for this check is to prevent wild memory accesses when
reading input with corrupted register values while accessing the
col_type/col_offset arrays. However in that case r15 is a perfectly
valid register. It just happens not to be mentioned in the CIE. Hence
restoring the CIE rule for r15 should end up with the default rule which
is DW_CFA_undefined.
This probably wasn't observed on other platforms because they either do
not use CFA_restore (x86-64) or do not issue CFA_restore on registers
with a higher number than the return address column.
binutils/ChangeLog:
2016-09-29 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* dwarf.c (frame_display_row): Fix formatting of return address
register column.
(display_debug_frames): Ignore invalid indices into
cie->col_type/cie->col_offset arrays and default to
DW_CF_undefined instead.
This patch adds support for .cfi_val_offset GAS pseudo command which
maps to DW_CFA_val_offset and DW_CFA_val_offset_sf.
gas/ChangeLog:
2016-09-29 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* doc/as.texinfo: Add docu for .cfi_val_offset.
* dw2gencfi.c (cfi_add_CFA_val_offset): New function.
(dot_cfi): Add case for DW_CFA_val_offset.
(output_cfi_insn): Likewise.
(cfi_pseudo_table): Add entry for cfi_val_offset.
* dw2gencfi.h: Add prototype for cfi_add_CFA_val_offset.
* testsuite/gas/cfi/cfi-common-8.d: New test.
* testsuite/gas/cfi/cfi-common-8.s: New test.
* testsuite/gas/cfi/cfi.exp: Run cfi-common-8 testcase.
binutils/ChangeLog:
2016-09-29 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* dwarf.c (display_debug_frames): Adjust output line.
PR binutils/20440
* dwarf.c (display_debug_lines_decoded): Add checks for running
off the end of the section when populating the directory table and
file table.
(frame_display_row): Set max_regs equal to ncols.
(load_specific_debug_section): If the section is compressed, but
it is not big enough to hold a compression header then warn and
return 0.
PR 19872
bfd * dwarf2.c (parse_comp_unit): Skip warning about unrecognised
version number if the version is zero.
bin * dwarf.c (display_debug_aranges): Skip warning about unrecognised
version number if the version is zero.
When the DWARF address size is 32-bit, but the host machine is 64-bit,
objdump fails to spot base addresses specified in the .debug_ranges and
.debug_loc lists.
As an example, here is the output when dumping an example .debug_ranges
section with the pre-patched objdump:
Contents of the .debug_ranges section:
Offset Begin End
00000000 ffffffff 00000004 (start > end)
00000000 00000000 00000004
00000000 ffffffff 00000008 (start > end)
00000000 00000000 00000004
00000000 <End of list>
And this is what the same section looks like when dumped with the
patched version of objdump:
Contents of the .debug_ranges section:
Offset Begin End
00000000 ffffffff 00000004 (base address)
00000000 00000004 00000008
00000000 ffffffff 00000008 (base address)
00000000 00000008 0000000c
00000000 <End of list>
binutils/ChangeLog:
* dwarf.c (is_max_address): New function.
(display_loc_list): Remove out of date comment, use
is_max_address.
(display_debug_ranges): Likewise.
binutils/testsuite/ChangeLog:
* binutils-all/objdump.exp: Add test for .debug_ranges decode.
* binutils-all/dw2-ranges.S: New file.
* binutils-all/dw2-ranges.W: New file.
This patch fixes all occurences of left-shifting negative constants in C code
which is undefined by the C standard.
binutils/ChangeLog:
* dwarf.c (read_leb128): Fix left shift of negative value.
PR binutils/18374
bin * dwarf.h (struct dwarf_section): Add reloc_info and num_relocs
fields.
(struct dwarf_section_display): Change bitfield to boolean.
(reloc_at): Add prototype.
* dwarf.c (display_loc_list): Ignore list terminators if there are
relocs against them.
(display_debug_loc): Issue a warning if there are relocs against
the .debug_loc section.
(display_displays): Initialise reloc_info and num_relocs fields.
* objdump.c (load_specific_debug_section): Initialise reloc_info
and num_relocs fields.
(reloc_at): New function.
* readelf.c (is_32bit_abs_reloc): Add IA64's R_IA64_DIS32LSB
reloc.
(reloc_at): New function.
(apply_relocations): Add relocs_return and num_relocs_return
parameters. Fill them in with the loaded relocs if non-NULL.
(dump_section_as_bytes): Update call to apply_relocations.
(load_specific_debug_section): Initialise reloc_info and
num_relocs fields.
tests * binutils-all/pr18374.s: New test file.
* binutils-all/readelf.exp: Assemble and run the new test.
* binutils-all/readelf.pr18374: Expected output from readelf.
PR binutils/17512
* dwarf.c (display_debug_loc): Pacify the undefined behaviour
sanitizer by simplifying address difference calculation.
(struct Frame_Chunk): Change type of cfa_offset to dwarf_vma in
order to avoid arithmetic overflows.
(frame_display_row): Cast cfa_offset before printing it.
(display_debug_frames): Likewise.
Check for an unexpected segment size.
Chnage type of 'l' local to dwarf_vma and cast it back to an int
when printing.
(process_cu_tu_index): Tighten check for an invalid ncols value.
* readelf.c (process_corefile_note_segment): Check for
inote.descdata extending beyond the end of the section.
(process_v850_notes): Likewise.
PR binutils/17531
* dwarf.c (display_debug_aranges): Add check for an excessive
ar_length value.
(process_cu_tu_index): Check for a row * columns sum being too
large.
PR binutils/17531
* dwarf.c (display_debug_pubnames_worker): Work around compiler
bug checking address ranges.
(display_debug_frames): Likewise.
(display_gdb_index): Likewise.
(process_cu_tu_index): Add range check on the ncols value.
PR binutils/17531
* dwarf.c (display_debug_pubnames_worker): Use dwarf_vma type for
offset.
* readelf.c (dump_relocations): Handle printing offsets which are
MIN_INT.
(process_corefile_note_segment): Add range check of the namesz
field.
PR binutils/17531
* dwarf.c (process_debug_info): Zero the debug information array
since correct initialisation cannot be relied upon.
(process_cu_tu_index): Improve range checks.
PR binutils/17512
* dwarf.c (eh_addr_size): Use an unsigned type.
(size_of_encoded_value): Return an unsigned type.
(read_leb128): Break if the shift becomes too big.
(process_extended_line_op): Do not read the address if the length
is too long.
(read_cie): Warn and fail if the pointer size or segment size are
too big.
* dwarf.h (DWARF2_External_LineInfo): Delete unused and incorrect
structure definition.
(DWARF2_External_PubNames): Likewise.
(DWARF2_External_CompUnit): Likewise.
(DWARF2_External_ARange): Likewise.
(DWARF2_Internal_LineInfo): Use dwarf_vma type for
li_prologue_length.
(eh_addr_size): Update prototype.
* coffcode.h (styp_to_sec_flags): Use an unsigned long type to
hold the flag bits.
* peXXigen.c (pe_print_reloc): Use unsigned types to hold the
size and number of relocs.
(pe_print_debugdata): Use a 32-bit aligned buffer to store the
codeview record.
* versados.c (process_otr): Check the esdid value before using it
to access the EDATA.
DWARFv5 defines and GCC5 may output two new DW_LANG constants for the
Fortran 2003 and Fortran 2008 standards. Handle and display both in
binutils.
binutils/ChangeLog:
* dwarf.c (read_and_display_attr_value): Handle DW_LANG_Fortran03
and DW_LANG_Fortran08.
include/ChangeLog:
* dwarf2.h: Add DW_LANG_Fortran03 and DW_LANG_Fortran08.
http://dwarfstd.org/ShowIssue.php?issue=141121.1
PR binutils/17512
* dwarf.c (display_debug_frames): Fix range checks to work on
32-bit binaries complied on a 64-bit host.
* peXXigen.c (rsrc_print_resource_entries): Add range check for
addresses that wrap around the address space.
(rsrc_parse_entry): Likewise.
PR binutils/17531
* dwarf.c (read_and_display_attr_value): Test for a block length
being so long that it wraps around to before the start of the block.
(process_debug_info): Test for section_begin wrapping around to
before the start of the section.
(display_gdb_index): Test for num_cus being so large that the end
address wraps around to before the start of the section.
(process_cu_tu_index): Test for j being so large that the section
index pool wraps around to before the start of the section.
PR binutils/17531
* dwarf.c (process_debug_info): Add range check.
(display_debug_pubnames_worker): Likewise.
(display_gdb_index): Fix range check.
(process_cu_tu_index): Add range check.
* readelf.c (get_data): Change parameter types from size_t to
bfd_size_type. Add checks for loss of accuracy when casting from
bfd_size_type to size_t.
(get_dynamic_data): Likewise.
(process_section_groups): Limit number of error messages.
abbrev_base is independent of abbrev_size. We should use abbrev_base +
abbrev_size to check abbrev section size.
* dwarf.c (process_debug_info): Properly check abbrev size.
PR binutils/17531
* dwarf.c (process_debug_info): Check for abbrev_base being larger
than the section size.
(process_cu_tu_index): Use xcalloc2 to allocate the CU and TU
arrays.
(xcalloc2): New function. Like xcalloc, but checks for overflow.
* dwarf.h (xcalloc2): Prototype.
PR binutils/17531
* dwarf.c (alloc_num_debug_info_entries): New variable.
(process_debug_info): Set it. Use it to avoid displaying
attributes for which there is no info.
(display_debug_abbrev): Check that the debug_info_entry index is
valid before using it.
(display_loc_list_dwo): Likewise.
(process_cu_tu_index): Add range check for an overlarge dw_sect
value.
(free_debug_memory): Reset alloc_num_debug_info_entries.
* readelf.c (slurp_ia64_unwind_table): Warn if the reloc could not
be indentified.
(dynamic_section_mips_val): Warn if the timestamp is invalid.
(print_mips_got_entry): Add a data_end parameter. Warn if a read
would go beyond the end of the data, and return an error value.
(process_mips_specific): Do not read options from beyond the end
of the section.
Correct code to display optional data at the end of an option.
Warn if there are too many GOT symbols.
Update calls to print_mips_got_entry, and handle error returns.
PR binutils/17531
* dwarf.c (decode_location_expression): Check for an out of range
value for a DW_OP_GNU_entry_value expression.
(display_debug_lines_raw): Check for a partial
.debug_line. section being encountered without a prior, full
.debug.line section.
(display_debug_lines_decoded): Likewise. Also check for
li_line_range being zero.
(display_debug_pubnames_worker): Check for an invalid pn_length
field.
(read_cie): Add range checks.
* elfcomm.c (setup_archive): Check for a negative longnames_size.
Also fix a place where %lld was wrongly used to print a dwarf_vma.
* configure.ac: Check for long long and sizes of long long and long.
* elfcomm.h (HOST_WIDEST_INT): Test HAVE_LONG_LONG in place of
__STDC_VERSION__ and __GNUC__.
* strings.c (print_strings): Likewise.
* dwarf.c (DWARF_VMA_FMT, DWARF_VMA_FMT_LONG): Likewise.
(read_debug_line_header): Use dwarf_vmatoa to print warning.
* configure: Regenerate.
* config.in: Regenerate.
PR binutils/17531
* dwarf.c (display_debug_frames): Check for a negative
augmentation data length.
(display_gdb_index): Check for invalid offsets.
* elfcomm.c (process_archive_index_and_symbols): Check for an
index number that overflows when multiplied by the ar index size.
* readelf.c (dump_ia64_unwind): Add range checks.
(slurp_ia64_unwind_table): Change to a boolean function. Add
range checks.
(process_version_sections): Add range checks.
(get_symbol_version_string): Add check for missing section
headers.
PR binutils/17512
* dwarf.h (struct dwarf_section): Add user_data field.
* dwarf.c (frame_need_space): Check for an over large register
number.
(display_debug_frames): Check the return value from
frame_need_space. Check for a CFA expression that is so long the
start address wraps around.
(debug_displays): Initialise the user_data field.
* objdump.c (load_specific_debug_section): Save the BFD section
pointer in the user_data field of the dwarf_section structure.
(free_debug_section): Update BFD section data when freeing section
contents.
* readelf.c (load_specific_debug_section): Initialise the
user_data field.
* archive.c (do_slurp_coff_armap): Add range checks to prevent
running off the end of the string table.
* compress.c (bfd_get_full_section_contents): Return a NULL
pointer for zero sized sections. Do not attempt to copy a buffer
onto itself.
* elf-attrs.c (_bfd_elf_parse_attributes): Check for an empty
header. Add range checks to avoid running off the end of the
section.
* elf.c (bfd_elf_get_str_section): Seek before allocating so that
if the seek fails, no memory is allocated.
(bfd_elf_string_from_elf_section): Do not allocate a string from a
non string section. It only leads to trouble later on.
(_bfd_elf_print_private_bfd_data): Check for there being too
little external dynamic data.
(bfd_section_from_shdr): Replace assertion with a failure mode.
(bfd_section_from_shdr): When walking a loaded group section use
the internal structure size, not the external size. Check for the
group section being empty.
* elf32-i386.c (elf_i386_rtype_to_howto): Replace assertion with a
failure mode.
* elfcode.h (elf_slurp_reloc_table): Likewise.
* reloc.c (bfd_perform_relocation): Avoid seg-fault if the howto
parameter is NULL.
PR binutils/17531
* dwarf.c (process_cu_tu_index): Check for an out of range row
index.
* elfcomm.c (adjust_relative_path): Change name_len parameter to
an unsigned long. Check for path length overflow.
(process_archive_index_and_symbols): Check for invalid header
size.
(setup_archive): Add checks for invalid archives.
(get_archive_member_name): Add range checks.
* elfcomm.h (adjust_relative_path): Update prototyoe.
* readelf.c (process_archive): Add range checks.
PR binutils/17512
* dwarf.c (display_block): Do nothing if the block starts after
the end of the buffer.
(read_and_display_attr_value): Add range checks.
(struct Frame_Chunk): Make the ncols and ra fields unsigned.
(frame_need_space): Test for an ncols of zero.
(read_cie): Fail if the augmentation data extends off the end of
the buffer.
(display_debug_frames): Add checks for read_cie failing. Add
range checks.
* coff-h8300.c (rtype2howto): Replace abort with returning a NULL
value.
* coff-h8500.c (rtype2howto): Likewise.
* coff-tic30.c (rtype2howto): Likewise.
* coff-z80.c (rtype2howto): Likewise.
* coff-z8k.c (rtype2howto): Likewise.
* coff-ia64.c (RTYPE2HOWTO): Always return a valid howto.
* coff-m68k.c (m68k_rtype2howto): Return a NULL howto if none
could be found.
* coff-mcore.c (RTYPE2HOWTO): Add range checking.
* coff-w65.c (rtype2howto): Likewise.
* coff-we32k.c (RTYPE2HOWTO): Likewise.
* pe-mips.c (RTYPE2HOWTO): Likewise.
* coff-x86_64.c (coff_amd64_reloc): Likewise. Replace abort with
an error return.
* coffcode.h (coff_slurp_reloc_table): Allow the rel parameter to
be unused.
* coffgen.c (make_a_section_from_file): Check the length of a
section name before testing to see if it is a debug section name.
(coff_object_p): Zero out any uninitialised bytes in the opt
header.
* ecoff.c (_bfd_ecoff_slurp_symbolic_info): Test for the raw
source being empty when there are values to be processed.
(_bfd_ecoff_slurp_symbol_table): Add range check.
* mach-o.c (bfd_mach_o_canonicalize_one_reloc): Likewise.
(bfd_mach_o_mangle_sections): Move test for too many sections to
before the allocation of the section table.
(bfd_mach_o_read_symtab_strtab): If the read fails, free the
memory and nullify the symbol pointer.
* reloc.c (bfd_generic_get_relocated_section_contents): Add
handling of a bfd_reloc_notsupported return value.
* versados.c (EDATA): Add range checking.
(get_record): Likewise.
(process_otr): Check for contents being available before updating
them.
(versados_canonicalize_reloc): Add range check.
PR binutils/17512
* dwarf.c (get_encoded_value): Check for an encoded size of 0.
(display_debug_lines_raw): Check for an invalid line range value.
(display_debug_frames): Check for corrupt augmentation data.
* coffgen.c (coff_get_normalized_symtab): Check for an excessive
number of auxillary entries.
* ieee.c (next_byte): Convert to a function. Return FALSE if the
next byte is beyond the end of the buffer.
(parse_int): Test the return value of next_byte.
(parse_expression): Convert to boolean. Return FALSE if the
parsing failed. Test the return value of next_byte.
(ieee_seek): Convert to a function. Return FALSE if the seek goes
beyond the end of the buffer.
(ieee_slurp_external_symbols): Test the return value of ieee_seek
and next_byte.
(ieee_slurp_sections): Convert to boolean. Return FALSE if the
operation failed. Test the return value of ieee_seek and
next_byte.
(ieee_archive_p): Test the return value of ieee_seek and
next_byte.
(do_one): Likewise.
(ieee_slurp_section_data): Likewise.
(ieee_object_p): Likewise. Store the size of the buffer in the
total_amt field in the header.
* libieee.h (common_header_type): Add amt field.
* mach-o.c (bfd_mach_o_canonicalize_one_reloc): Check that the
reloc's value is within range.
(bfd_mach_o_read_symtab_symbols): Nullify the symbols field if the
operation fails.
* pei-x86_64.c (pex64_xdata_print_uwd_codes): Replace abort with
an error message.
(pex64_dump_xdata): Check for buffer overflows.
* versados.c (process_otr): Check that the section exists before
taking its size.
(versados_object_p): Make sure that enough data was read for the
header to be checked.
* vms-alpha.c (vms_get_remaining_object_record): Change
read_so_far parameter to an unsigned int. Check that the amount
read is in range.
This is the updated version using uintptr_t as Alan Modra suggested.
2014-11-18 Jan-Benedict Glaw <jbglaw@lug-owl.de>
* dwarf.c (process_extended_line_op): Fix signedness warning.
PR binutils/17512
* peXXIgen.c (pe_print_pdata): Fail if the section's virtual size
is larger than its real size.
(rsrc_print_section): Fix off-by-one error checking for overflow.
* pei-x86_64.c (pex64_bfd_print_pdata): Handle empty unwind
sections.
* dwarf.c (get_encoded_value): Warn and return if the encoded
value is more than 64-bits long.
(SAFE_BYTE_GET): Do not attempt to read more than 64-bits.
(process_extended_line_op): Add more range checks.
(decode_location_expression): Use the return value from
display_block. Add more range checks.
(read_debug_line_header): Add range check.
(display_debug_lines_raw): Add range checks.
(display_debug_frames): Silently skip multiple zero terminators.
Add range checks.
(process_cu_tu_index): Check for non-existant or empty sections.
Use SAFE_BYTE_GET instead of byte_get.
PR binutils/17512
* dwarf.c (get_encoded_value): Add an 'end' parameter. Change the
'data' parameter to a double pointer and return the updated value.
(decode_location_expression): Update call to get_encoded_value.
(frame_need_space): Handle the case where one or both of the
mallocs fails.
(read_cie): Initialise the cie pointer, even if the read fails.
(display_debug_frames): Warn if the calculated block_end is before
the start of the block. Break the loop if the CIE could not be
read. Update call to get_encoded_value. Warn if the read CFA
expressions are too big.
* ieee.c (ieee_archive_p) Skip processing if no bytes are read at
all.
(ieee_object_p): Likewise.
PR binutils/17512
* dwarf.c (read_and_display_attr_value): Check that we do not read
past end.
(display_debug_pubnames_worker): Add range checks.
(process_debug_info): Check for invalid pointer sizes.
(display_loc_list): Likewise.
(display_loc_list_dwo): Likewise.
(display_debug_ranges): Likewise.
(display_debug_aranges): Check for invalid address size.
(read_cie): Add range checks. Replace call strchr with while loop.
* objdump.c (dump_dwarf): Replace abort with a warning message.
(print_section_stabs): Improve range checks.
* rdcoff.c (coff_get_slot): Use long for indx parameter type.
Add check for an excesively large index.
* rddbg.c (read_section_stabs_debugging_info): Zero terminate the
string table. Avoid walking off the end of the stabs data.
* stabs.c (parse_stab_string): Add check for a NULL name.
PR binutils/17512
* coffcode.h (coff_slurp_line_table): Set the line number of
corrupt entries to -1.
(coff_slurp_symbol_table): Alway initialise the value of the
symbol.
* coffgen.c (coff_print_symbol): Check that the combined pointer
is valid.
(coff_print_symbol): Do not print negative line numbers.
* peXXigen.c (pe_print_idata): Add range checking displaying
member names.
The linker side of pr16563 was fixed with commit 18cd5bce, but
unfortunately people continue to use older linkers with -flto. This
means we have binaries with working .eh_frame that can't be dumped by
readelf, and I'm seeing internal IBM bug reports about this fact.
PR 16563
* dwarf.c (GET): Remove semicolon.
(read_cie): New function, extracted from..
(display_debug_frames): ..here. Correctly handle signed offset
from FDE to CIE in .eh_frame. Decode forward referenced CIEs too.
When a DW_FORM_flag_present attribute comes at the very end of a
debug section, readelf complains about a corrupt attribute
because it's checking to make sure there's at least one byte of
data remaining. This patch suppresses the check when the form
is DW_FORM_flag_present.
2014-02-11 Cary Coutant <ccoutant@google.com>
* binutils/dwarf.c (read_and_display_attr_value): Don't warn
for zero-length attribute value.
I happened to run readelf on an ELF file created by Guile. readelf
complained about invalid values for DW_FORM_strp. At first I assumed
this was just a Guile bug, but eu-readelf did the right thing, so I
looked a bit deeper.
I came across some old Mach-O code to bias some offsets by section
addresses. Guile, unlike many ELF writers, sets the address for the
various DWARF-related sections, causing this unusual code to be run.
This code came from an old commit:
2005-09-30 H.J. Lu <hongjiu.lu@intel.com>
* dwarf.c (fetch_indirect_string): Adjust for section address.
(process_debug_info): Likewise.
(display_debug_loc): Likewise.
(display_debug_ranges): Likewise.
* objdump.c (mach_o_dwarf_sections): New.
(generic_dwarf_sections): Likewise.
(check_mach_o_dwarf): Likewise.
(dump_dwarf): Call check_mach_o_dwarf.
However it was partially reverted here:
https://sourceware.org/ml/binutils/2008-11/msg00134.html
This patch just completes the reversion.
Built and regtested on x86-64 Fedora 18. I also ran the resulting
readelf against the Guile-created object with success.
I have no way of testing this on Mach-O, so your feedback is
solicited.
2013-12-19 Tom Tromey <tromey@redhat.com>
* dwarf.c (fetch_indirect_string): Don't bias by section address.
(fetch_indexed_string): Likewise.
(process_debug_info): Likewise.
(display_debug_loc): Likewise.
(display_debug_ranges): Likewise.
