The initial motivation for this commit was to allow thread or inferior
specific breakpoints to only be inserted within the appropriate
inferior's program-space. The benefit of this is that inferiors for
which the breakpoint does not apply will no longer need to stop, and
then resume, for such breakpoints. This commit does not make this
change, but is a refactor to allow this to happen in a later commit.
The problem we currently have is that when a thread-specific (or
inferior-specific) breakpoint is created, the thread (or inferior)
number is only parsed by calling find_condition_and_thread_for_sals.
This function is only called for non-pending breakpoints, and requires
that we know the locations at which the breakpoint will be placed (for
expression checking in case the breakpoint is also conditional).
A consequence of this is that by the time we figure out the breakpoint
is thread-specific we have already looked up locations in all program
spaces. This feels wasteful -- if we knew the thread-id earlier then
we could reduce the work GDB does by only looking up locations within
the program space for which the breakpoint applies.
Another consequence of how find_condition_and_thread_for_sals is
called is that pending breakpoints don't currently know they are
thread-specific, nor even that they are conditional! Additionally, by
delaying parsing the thread-id, pending breakpoints can be created for
non-existent threads, this is different to how non-pending
breakpoints are handled, so I can do this:
$ gdb -q ./gdb/testsuite/outputs/gdb.multi/pending-bp/pending-bp
Reading symbols from ./gdb/testsuite/outputs/gdb.multi/pending-bp/pending-bp...
(gdb) break foo thread 99
Function "foo" not defined.
Make breakpoint pending on future shared library load? (y or [n]) y
Breakpoint 1 (foo thread 99) pending.
(gdb) r
Starting program: /tmp/gdb/testsuite/outputs/gdb.multi/pending-bp/pending-bp
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib64/libthread_db.so.1".
Error in re-setting breakpoint 1: Unknown thread 99.
[Inferior 1 (process 3329749) exited normally]
(gdb)
GDB only checked the validity of 'thread 99' at the point the 'foo'
location became non-pending. In contrast, if I try this:
$ gdb -q ./gdb/testsuite/outputs/gdb.multi/pending-bp/pending-bp
Reading symbols from ./gdb/testsuite/outputs/gdb.multi/pending-bp/pending-bp...
(gdb) break main thread 99
Unknown thread 99.
(gdb)
GDB immediately checks if 'thread 99' exists. I think inconsistencies
like this are confusing, and should be fixed if possible.
In this commit the create_breakpoint function is updated so that the
extra_string, which contains the thread, inferior, task, and/or
condition information, is parsed immediately, even for pending
breakpoints.
Obviously, the condition still can't be validated until the breakpoint
becomes non-pending, but the thread, inferior, and task information
can be pulled from the extra-string, and can be validated early on,
even for pending breakpoints. The -force-condition flag is also
parsed as part of this early parsing change.
There are a couple of benefits to doing this:
1. Printing of breakpoints is more consistent now. Consider creating
a conditional breakpoint before this commit:
(gdb) set breakpoint pending on
(gdb) break pendingfunc if (0)
Function "pendingfunc" not defined.
Breakpoint 1 (pendingfunc if (0)) pending.
(gdb) break main if (0)
Breakpoint 2 at 0x401198: file /tmp/hello.c, line 18.
(gdb) info breakpoints
Num Type Disp Enb Address What
1 breakpoint keep y <PENDING> pendingfunc if (0)
2 breakpoint keep y 0x0000000000401198 in main at /tmp/hello.c:18
stop only if (0)
(gdb)
And after this commit:
(gdb) set breakpoint pending on
(gdb) break pendingfunc if (0)
Function "pendingfunc" not defined.
Breakpoint 1 (pendingfunc) pending.
(gdb) break main if (0)
Breakpoint 2 at 0x401198: file /home/andrew/tmp/hello.c, line 18.
(gdb) info breakpoints
Num Type Disp Enb Address What
1 breakpoint keep y <PENDING> pendingfunc
stop only if (0)
2 breakpoint keep y 0x0000000000401198 in main at /home/andrew/tmp/hello.c:18
stop only if (0)
(gdb)
Notice that the display of the condition is now the same for the
pending and non-pending breakpoints.
The same is true for the thread, inferior, or task information in
thread, inferior, or task specific breakpoints; this information is
displayed on its own line rather than being part of the 'What'
field.
2. We can check that the thread exists as soon as the pending
breakpoint is created. Currently there is a weird difference
between pending and non-pending breakpoints when creating a
thread-specific breakpoint.
A pending thread-specific breakpoint only checks its thread when it
becomes non-pending, at which point the thread the breakpoint was
intended for might have exited. Here's the behaviour before this
commit:
(gdb) set breakpoint pending on
(gdb) break foo thread 2
Function "foo" not defined.
Breakpoint 2 (foo thread 2) pending.
(gdb) c
Continuing.
[Thread 0x7ffff7c56700 (LWP 2948835) exited]
Error in re-setting breakpoint 2: Unknown thread 2.
[Inferior 1 (process 2948832) exited normally]
(gdb)
Notice the 'Error in re-setting breakpoint 2: Unknown thread 2.'
line, this was triggered when GDB tried to make the breakpoint
non-pending, and GDB discovers that the thread no longer exists.
Compare that to the behaviour after this commit:
(gdb) set breakpoint pending on
(gdb) break foo thread 2
Function "foo" not defined.
Breakpoint 2 (foo) pending.
(gdb) c
Continuing.
[Thread 0x7ffff7c56700 (LWP 2949243) exited]
Thread-specific breakpoint 2 deleted - thread 2 no longer in the thread list.
[Inferior 1 (process 2949240) exited normally]
(gdb)
Now the behaviour for pending breakpoints is identical to
non-pending breakpoints, the thread specific breakpoint is removed
as soon as the thread the breakpoint is associated with exits.
There is an additional change; when the pending breakpoint is
created prior to this patch we see this line:
Breakpoint 2 (foo thread 2) pending.
While after this patch we get this line:
Breakpoint 2 (foo) pending.
Notice that 'thread 2' has disappeared. This might look like a
regression, but I don't think it is. That we said 'thread 2'
before was just a consequence of the lazy parsing of the breakpoint
specification, while with this patch GDB understands, and has
parsed away the 'thread 2' bit of the spec. If folk think the old
information was useful then this would be trivial to add back in
code_breakpoint::say_where.
As a result of this commit the breakpoints 'extra_string' field is now
only used by bp_dprintf type breakpoints to hold the printf format and
arguments. This string should always be empty for other breakpoint
types. This allows some cleanup in print_breakpoint_location.
In code_breakpoint::code_breakpoint I've changed an error case into an
assert. This is because the error is now handled earlier in
create_breakpoint. As a result we know that by this point, the
extra_string will always be nullptr for anything other than a
bp_dprintf style breakpoint.
The find_condition_and_thread_for_sals function is now no longer
needed, this was previously doing the delayed splitting of the extra
string into thread, task, and condition, but this is now all done in
create_breakpoint, so find_condition_and_thread_for_sals can be
deleted, and the code that calls this in
code_breakpoint::location_spec_to_sals can be removed. With this
update this code would only ever be reached for bp_dprintf style
breakpoints, and in these cases the extra_string should not contain
anything other than format and args.
The most interesting changes are all in create_breakpoint and in the
new file break-cond-parse.c. We have a new block of code early on in
create_breakpoint that is responsible for splitting the extra_string
into its component parts by calling create_breakpoint_parse_arg_string
a function in the new break-cond-parse.c file. This means that some
of the later code can be simplified a little.
The new break-cond-parse.c file implements the splitting up the
extra_string and finding all the parts, as well as some self-tests for
the new function.
Finally, now we know all the breakpoint details, these can be stored
within the breakpoint object if we end up creating a deferred
breakpoint. Additionally, if we are creating a deferred bp_dprintf we
can parse the extra_string to build the printf command.
The implementation here aims to maintain backwards compatibility as
much as possible, this means that:
1. We support abbreviations of 'thread', 'task', and 'inferior' in
some places on the breakpoint line. The handling of abbreviations
has (before this patch) been a little weird, so this works:
(gdb) break *main th 1
And creates a breakpoint at '*main' for thread 1 only, while this
does not work:
(gdb) break main th 1
In this case GDB will try to find the symbol 'main th 1'. This
weirdness exists before and after this patch.
2. The handling of '-force-condition' is odd, if this flag appears
immediately after a condition then it will be treated as part of the
condition, e.g.:
(gdb) break main if 0 -force-condition
No symbol "force" in current context.
But we are fine with these alternatives:
(gdb) break main if 0 thread 1 -force-condition
(gdb) break main -force-condition if 0
Again, this is just a quirk of how the breakpoint line used to be
parsed, but I've maintained this for backward compatibility. During
review it was suggested that -force-condition should become an
actual breakpoint flag (i.e. only valid after the 'break' command
but before the function name), and I don't think that would be a
terrible idea, however, that's not currently a trivial change, and I
think should be done as a separate piece of work. For now, this
patch just maintains the current behaviour.
The implementation works by first splitting the breakpoint condition
string (everything after the location specification) into a list of
tokens, each token has a type and a value. (e.g. we have a THREAD
token where the value is the thread-id string). The list of tokens is
validated, and in some cases, tokens are merged. Then the values are
extracted from the remaining token list.
Consider this breakpoint command:
(gdb) break main thread 1 if argc == 2
The condition string passed to create_breakpoint_parse_arg_string is
going to be 'thread 1 if argc == 2', which is then split into the
tokens:
{ THREAD: "1" } { CONDITION: "argc == 2" }
The thread-id (1) and the condition string 'argc == 2' are extracted
from these tokens and returns back to create_breakpoint.
Now consider this breakpoint command:
(gdb) break some_function if ( some_var == thread )
Here the user wants a breakpoint if 'some_var' is equal to the
variable 'thread'. However, when this is initially parsed we will
find these tokens:
{ CONDITION: "( some_var == " } { THREAD: ")" }
This is a consequence of how we have to try and figure out the
contents of the 'if' condition without actually parsing the
expression; parsing the expression requires that we know the location
in order to lookup the variables by name, and this can't be done for
pending breakpoints (their location isn't known yet), and one of the
points of this work is that we extract things like thread-id for
pending breakpoints.
And so, it is in this case that token merging takes place. We check
if the value of a token appearing immediately after the CONDITION
token looks valid. In this case, does ')' look like a valid
thread-id. Clearly, in this case ')' does not, and so me merge the
THREAD token into the condition token, giving:
{ CONDITION: "( some_var == thread )" }
Which is what we want.
I'm sure that we might still be able to come up with some edge cases
where the parser makes the wrong choice. I think long term the best
way to work around these would be to move the thread, inferior, task,
and -force-condition flags to be "real" command options for the break
command. I am looking into doing this, but can't guarantee if/when
that work would be completed, so this patch should be reviewed assume
that the work will never arrive (though I hope it will).
Reviewed-By: Eli Zaretskii <eliz@gnu.org>
Remove the support for the QNX Neutrino OS (tdep and native bits). This
has been unmaintained for years, and we don't have a way to see if it
works (or even builds, for the native parts). Without somebody actively
maintaining it, this is just a burden for developers, especially that
this port does a few weird unique things that require reasoning about
when doing big change.
Support for GDBserver was removed in 2020, commit 613f149a90
("gdbserver: remove support for Neutrino").
Change-Id: I4e25ec26ab06636629adebd02ceb161ee31c232d
Approved-by: Kevin Buettner <kevinb@redhat.com>
This commit moves aarch64_linux_memtag_matches_p,
aarch64_linux_set_memtags, aarch64_linux_get_memtag, and
aarch64_linux_memtag_to_string hooks (plus the aarch64_mte_get_atag
function used by them), along with the setting of the memtag granule
size, from aarch64-linux-tdep.c to aarch64-tdep.c, making MTE available
on baremetal targets. Since the aarch64-linux-tdep.c layer inherits
these hooks from aarch64-tdep.c, there is no effective change for
aarch64-linux targets.
Helpers used both by aarch64-tdep.c and by aarch64-linux-tdep.c were
moved from arch/aarch64-mte-linux.{c,h} to new arch/aarch64-mte.{c,h}
files.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Tested-By: Luis Machado <luis.machado@arm.com>
Approved-By: Luis Machado <luis.machado@arm.com>
Reviewed-By: Eli Zaretskii <eliz@gnu.org>
LoongArch defines hardware watchpoint functions for load/store
operations. After the software configures the watchpoints for
load/store, the processor hardware will monitor the access
addresses of the load/store operations and trigger watchpoint
exception when the watchpoint setting conditions are met.
After this patch, watch/rwatch/awatch command are supported. Refer to the
following document for hardware watchpoint.
https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#control-and-status-registers-related-to-watchpoints
A simple test is as follows:
lihui@bogon:~$ cat test.c
#include <stdio.h>
int a = 0;
int main()
{
printf("start test\n");
a = 1;
printf("a = %d\n", a);
printf("end test\n");
return 0;
}
lihui@bogon:~$ gcc -g test.c -o test
without this patch:
lihui@bogon:~$ gdb test
...
(gdb) start
...
Temporary breakpoint 1, main () at test.c:5
5 printf("start test\n");
(gdb) awatch a
Target does not support this type of hardware watchpoint.
...
with this patch:
lihui@bogon:~$ gdb test
...
(gdb) start
...
Temporary breakpoint 1, main () at test.c:5
5 printf("start test\n");
(gdb) awatch a
Hardware access (read/write) watchpoint 2: a
(gdb) c
Continuing.
start test
Hardware access (read/write) watchpoint 2: a
Old value = 0
New value = 1
main () at test.c:7
7 printf("a = %d\n", a);
(gdb) c
Continuing.
Hardware access (read/write) watchpoint 2: a
Value = 1
0x00000001200006e0 in main () at test.c:7
7 printf("a = %d\n", a);
(gdb) c
Continuing.
a = 1
end test
[Inferior 1 (process 22250) exited normally]
Signed-off-by: Hui Li <lihui@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
This commit builds on the previous series of commits to share the
target description caching code between GDB and gdbserver for
x86/Linux targets.
The objective of this commit is to move the four functions (2 each of)
i386_linux_read_description and amd64_linux_read_description into the
gdb/arch/ directory and combine them so we have just a single copy of
each. Then GDB, gdbserver, and the in-process-agent (IPA) will link
against these shared functions.
One curiosity with this patch is the function
x86_linux_post_init_tdesc. On the gdbserver side the two functions
amd64_linux_read_description and i386_linux_read_description have some
functionality that is not present on the GDB side, there is some
additional configuration that is performed as each target description
is created, to setup the expedited registers.
To support this I've added the function x86_linux_post_init_tdesc.
This function is called from the two *_linux_read_description
functions, but is implemented separately for GDB and gdbserver.
An alternative approach that avoids adding x86_linux_post_init_tdesc
would be to have x86_linux_tdesc_for_tid return a non-const target
description, then in x86_target::low_arch_setup we could inspect the
target description to figure out if it is 64-bit or not, and modify
the target description as needed. In the end I think that adding the
x86_linux_post_init_tdesc function is the simpler solution.
The contents of gdbserver/linux-x86-low.cc have moved to
gdb/arch/x86-linux-tdesc-features.c, and gdbserver/linux-x86-tdesc.h
has moved to gdb/arch/x86-linux-tdesc-features.h, this change leads to
some updates in the #includes in the gdbserver/ directory.
This commit also changes how target descriptions are cached.
Previously both GDB and gdbserver used static C-style arrays to act as
the tdesc cache. This was fine, except for two problems. Either the
C-style arrays would need to be placed in x86-linux-tdesc-features.c,
which would allow us to use the x86_linux_*_tdesc_count_1() functions
to size the arrays for us, or we'd need to hard code the array sizes
using separate #defines, which we'd then have to keep in sync with the
rest of the code in x86-linux-tdesc-features.c.
Given both of these problems I decided a better solution would be to
just switch to using a std::unordered_map to act as the cache. This
will resize automatically, and we can use the xcr0 value as the key.
At first inspection, using xcr0 might seem to be a problem; after all
the {i386,amd64}_create_target_description functions take more than
just the xcr0 value. However, this patch is only for x86/Linux
targets, and for x86/Linux all of the other flags passed to the tdesc
creation functions have constant values and so are irrelevant when we
consider tdesc caching.
For testing I've done the following:
- Built on x86-64 GNU/Linux for all targets, and just for the native
target,
- Build on i386 GNU/Linux for all targets, and just for the native
target,
- Build on a 64-bit, non-x86 GNU/Linux for all targets, just for the
native target, and for targets x86_64-*-linux and i386-*-linux.
Approved-By: Felix Willgerodt <felix.willgerodt@intel.com>
This commit is part of a series to share more of the x86 target
description creation code between GDB and gdbserver.
Unlike previous commits which were mostly refactoring, this commit is
the first that makes a real change, though that change should mostly
be for gdbserver; I've largely adopted the "GDB" way of doing things
for gdbserver, and this fixes a real gdbserver bug.
On a x86-64 Linux target, running the test:
gdb.server/connect-with-no-symbol-file.exp
results in two core files being created. Both of these core files are
from the inferior process, created after gdbserver has detached.
In this test a gdbserver process is started and then, after gdbserver
has started, but before GDB attaches, we either delete the inferior
executable, or change its permissions so it can't be read. Only after
doing this do we attempt to connect with GDB.
As GDB connects to gdbserver, gdbserver attempts to figure out the
target description so that it can send the description to GDB, this
involves a call to x86_linux_read_description.
In x86_linux_read_description one of the first things we do is try to
figure out if the process is 32-bit or 64-bit. To do this we look up
the executable via the thread-id, and then attempt to read the
architecture size from the executable. This isn't going to work if
the executable has been deleted, or is no longer readable.
And so, as we can't read the executable, we default to an i386 target
and use an i386 target description.
A consequence of using an i386 target description is that addresses
are assumed to be 32-bits. Here's an example session that shows the
problems this causes. This is run on an x86-64 machine, and the test
binary (xx.x) is a standard 64-bit x86-64 binary:
shell_1$ gdbserver --once localhost :54321 /tmp/xx.x
shell_2$ gdb -q
(gdb) set sysroot
(gdb) shell chmod 000 /tmp/xx.x
(gdb) target remote :54321
Remote debugging using :54321
warning: /tmp/xx.x: Permission denied.
0xf7fd3110 in ?? ()
(gdb) show architecture
The target architecture is set to "auto" (currently "i386").
(gdb) p/x $pc
$1 = 0xf7fd3110
(gdb) info proc mappings
process 2412639
Mapped address spaces:
Start Addr End Addr Size Offset Perms objfile
0x400000 0x401000 0x1000 0x0 r--p /tmp/xx.x
0x401000 0x402000 0x1000 0x1000 r-xp /tmp/xx.x
0x402000 0x403000 0x1000 0x2000 r--p /tmp/xx.x
0x403000 0x405000 0x2000 0x2000 rw-p /tmp/xx.x
0xf7fcb000 0xf7fcf000 0x4000 0x0 r--p [vvar]
0xf7fcf000 0xf7fd1000 0x2000 0x0 r-xp [vdso]
0xf7fd1000 0xf7fd3000 0x2000 0x0 r--p /usr/lib64/ld-2.30.so
0xf7fd3000 0xf7ff3000 0x20000 0x2000 r-xp /usr/lib64/ld-2.30.so
0xf7ff3000 0xf7ffb000 0x8000 0x22000 r--p /usr/lib64/ld-2.30.so
0xf7ffc000 0xf7ffe000 0x2000 0x2a000 rw-p /usr/lib64/ld-2.30.so
0xf7ffe000 0xf7fff000 0x1000 0x0 rw-p
0xfffda000 0xfffff000 0x25000 0x0 rw-p [stack]
0xff600000 0xff601000 0x1000 0x0 r-xp [vsyscall]
(gdb) info inferiors
Num Description Connection Executable
* 1 process 2412639 1 (remote :54321)
(gdb) shell cat /proc/2412639/maps
00400000-00401000 r--p 00000000 fd:03 45907133 /tmp/xx.x
00401000-00402000 r-xp 00001000 fd:03 45907133 /tmp/xx.x
00402000-00403000 r--p 00002000 fd:03 45907133 /tmp/xx.x
00403000-00405000 rw-p 00002000 fd:03 45907133 /tmp/xx.x
7ffff7fcb000-7ffff7fcf000 r--p 00000000 00:00 0 [vvar]
7ffff7fcf000-7ffff7fd1000 r-xp 00000000 00:00 0 [vdso]
7ffff7fd1000-7ffff7fd3000 r--p 00000000 fd:00 143904 /usr/lib64/ld-2.30.so
7ffff7fd3000-7ffff7ff3000 r-xp 00002000 fd:00 143904 /usr/lib64/ld-2.30.so
7ffff7ff3000-7ffff7ffb000 r--p 00022000 fd:00 143904 /usr/lib64/ld-2.30.so
7ffff7ffc000-7ffff7ffe000 rw-p 0002a000 fd:00 143904 /usr/lib64/ld-2.30.so
7ffff7ffe000-7ffff7fff000 rw-p 00000000 00:00 0
7ffffffda000-7ffffffff000 rw-p 00000000 00:00 0 [stack]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
(gdb)
Notice the difference between the mappings reported via GDB and those
reported directly from the kernel via /proc/PID/maps, the addresses of
every mapping is clamped to 32-bits for GDB, while the kernel reports
real 64-bit addresses.
Notice also that the $pc value is a 32-bit value. It appears to be
within one of the mappings reported by GDB, but is outside any of the
mappings reported from the kernel.
And this is where the problem arises. When gdbserver detaches from
the inferior we pass the inferior the address from which it should
resume. Due to the 32/64 bit confusion we tell the inferior to resume
from the 32-bit $pc value, which is not within any valid mapping, and
so, as soon as the inferior resumes, it segfaults.
If we look at how GDB (not gdbserver) figures out its target
description then we see an interesting difference. GDB doesn't try to
read the executable. Instead GDB uses ptrace to query the thread's
state, and uses this to figure out the if the thread is 32 or 64 bit.
If we update gdbserver to do it the "GDB" way then the above problem
is resolved, gdbserver now sees the process as 64-bit, and when we
detach from the inferior we give it the correct 64-bit address, and
the inferior no longer segfaults.
Now, I could just update the gdbserver code, but better, I think, to
share one copy of the code between GDB and gdbserver in gdb/nat/.
That is what this commit does.
The cores of x86_linux_read_description from gdbserver and
x86_linux_nat_target::read_description from GDB are moved into a new
file gdb/nat/x86-linux-tdesc.c and combined into a single function
x86_linux_tdesc_for_tid which is called from each location.
This new function does things mostly the GDB way, some changes are
needed to allow for the sharing; we now take some pointers for where
the shared code can cache the xcr0 and xsave layout values.
Another thing to note about this commit is how the functions
i386_linux_read_description and amd64_linux_read_description are
handled. For now I've left these function as implemented separately
in GDB and gdbserver. I've moved the declarations of these functions
into gdb/arch/{i386,amd64}-linux-tdesc.h, but the implementations are
left where they are.
A later commit in this series will make these functions shared too,
but doing this is not trivial, so I've left that for a separate
commit. Merging the declarations as I've done here ensures that
everyone implements the function to the same API, and once these
functions are shared (in a later commit) we'll want a shared
declaration anyway.
Reviewed-By: Felix Willgerodt <felix.willgerodt@intel.com>
Acked-By: John Baldwin <jhb@FreeBSD.org>
The have_ptrace_getfpxregs global tracks whether GDB or gdbserver is
running on a kernel that supports the GETFPXREGS ptrace request.
Currently this global is declared twice (once in GDB and once in
gdbserver), I think it makes sense to move this global into the nat/
directory, and have a single declaration and definition.
While moving this variable I have converted it to a tribool, as that
was what it really was, if even used the same numbering as the tribool
enum (-1, 0, 1). Where have_ptrace_getfpxregs was used I have updated
in the obvious way.
However, while making this change I noticed what I think is a bug in
x86_linux_nat_target::read_description and x86_linux_read_description,
both of these functions can be called multiple times, but in both
cases we only end up calling i386_linux_read_description the first
time through in the event that PTRACE_GETFPXREGS is not supported.
This is because initially have_ptrace_getfpxregs will be
TRIBOOL_UNKNOWN, but after the ptrace call fails we set
have_ptrace_getfpxregs to TRIBOOL_FALSE. The next time we attempt to
read the target description we'll skip the ptrace call, and so skip
the call to i386_linux_read_description.
I've not tried to address this preexisting bug in this commit, this is
purely a refactor, there should be no user visible changes after this
commit. In later commits I'll merge the gdbserver and GDB code
together into the nat/ directory, and after that I'll try to address
this bug.
Reviewed-By: Felix Willgerodt <felix.willgerodt@intel.com>
When building in a fresh directory we'll see some output like this:
/bin/sh ../../src/gdb/../mkinstalldirs arch/.deps
mkdir -p -- arch/.deps
/bin/sh ../../src/gdb/../mkinstalldirs cli/.deps
mkdir -p -- cli/.deps
/bin/sh ../../src/gdb/../mkinstalldirs dwarf2/.deps
mkdir -p -- dwarf2/.deps
... etc ...
this commit uses silent-rules.mk to silence this output, now we'll
see:
GEN arch/.deps
GEN cli/.deps
GEN dwarf2/.deps
... etc ...
The recipe that currently generates these directories uses
mkinstalldirs, as I mention in commit 032e5e0c0c, mkinstalldirs
is deprecated and 'install-sh -d' should be used instead. This
silences the 'mkdir -p -- ...' part of the output.
There should be no change in what is actually built after this commit.
Approved-By: Tom Tromey <tom@tromey.com>
If you add an initialization function to a .y file, it will not show
up in init.c, because if the yacc output is in the build tree, it
won't be found.
This patch changes the Makefile to be more robust in this situation.
This removes the current test 'main' from cp-name-parser.y. There
aren't any tests using this, and nowadays it would be better as a unit
test.
Approved-By: John Baldwin <jhb@FreeBSD.org>
Make target check//% is the gdb variant of a similar gcc make target [1].
When running tests using check//%:
...
$ cd build/gdb
$ make check//unix/{-fPIE/-pie,-fno-PIE/-no-pie} -j2 TESTS=gdb.server/*.exp
...
we get:
...
$ cat build/gdb/testsuite.unix.-fPIE.-pie/cache/portnum
2427
$ cat build/gdb/testsuite.unix.-fno-PIE.-no-pie/cache/portnum
2423
...
The problem is that there are two portnum files used in parallel.
Fix this by:
- creating a common lockdir build/gdb/testsuite.lockdir for make target
check//%,
- passing this down to the runtests invocations using variable GDB_LOCK_DIR,
and
- using GDB_LOCK_DIR in lock_dir.
Tested on aarch64-linux.
Approved-By: Tom Tromey <tom@tromey.com>
PR testsuite/31632
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=31632
[1] https://gcc.gnu.org/install/test.html
Most files including gdbcmd.h currently rely on it to access things
actually declared in cli/cli-cmds.h (setlist, showlist, etc). To make
things easy, replace all includes of gdbcmd.h with includes of
cli/cli-cmds.h. This might lead to some unused includes of
cli/cli-cmds.h, but it's harmless, and much faster than going through
the 170 or so files by hand.
Change-Id: I11f884d4d616c12c05f395c98bbc2892950fb00f
Approved-By: Tom Tromey <tom@tromey.com>
Move the declarations out of defs.h, and the implementations out of
findvar.c.
I opted for a new file, because this functionality of converting
integers to bytes and vice-versa seems a bit to generic to live in
findvar.c.
Change-Id: I524858fca33901ee2150c582bac16042148d2251
Approved-By: John Baldwin <jhb@FreeBSD.org>
For some reason install-dvi is missing although other targets of the
same family are present. This looks like an oversight.
This enables calling 'make install-dvi' from the top-level build
directory.
Fix what looks like another oversight: include 'pdf' in 'all-doc' in
gdb/doc/Makefile.in.
Approved-By: Luis Machado <luis.machado@arm.com>
Tested-By: Luis Machado <luis.machado@arm.com>
The targets that use config.status to regenerate themselves don't
currently follow the silent rules that the rest of GDB's Makefile
does. For example, touch the gdb/gcore.in file and then 'make all' in
the gdb/ directory prints:
/bin/sh config.status gcore
config.status: creating gcore
In this commit I make use of the silent-rules.mk mechanism for these
targets, now we get:
GEN gcore
Which matches the rest of our Makefile. Obviously, if you pass 'V=1'
to the build then you'll get the old output back.
There's no change in what is generated after this commit.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
I noticed that for the build targets jit-reader.h, gcore, gdb-gdb.py,
and gdb-gdb.gdb the rules all use the config.status script, but don't
have a dependency on the config.status target. This means we might
fail to regenerate these targets in a case where config.status, or one
of its dependencies changes.
Two other targets that use config.status do correctly have a
dependency on config.status.
Fixed in this commit by adding the missing dependencies.
There should be no changes in _what_ is generated after this commit.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
I noticed something weird, the rule for the config.status target looks
like this:
config.status: $(srcdir)/configure configure.nat configure.tgt configure.host ../bfd/development.sh
$(SHELL) config.status --recheck
What bothered me is that 'configure' is specified as being in
$(srcdir), while all of the other files are not, even though those
files are in the same $(srcdir) as the configure script.
However, I tried touching one of those files, and the config.status
rule does trigger!
This is thanks to the VPATH variable, which is set to $(srcdir), so
make looks in $(srcdir) for any dependencies.
However, this inconsistency bothers me. Better, I think, to add the
$(srcdir) prefix to each of these files.
I also spotted that the configure script also includes the files
../bfd/config.bfd, yet that is missing from the include list, so in
this commit I plan to add this as a dependency.
The configure script also pulls in two TCL and TK related files:
. ${TCL_BIN_DIR}/tclConfig.sh
. ${TK_BIN_DIR}/tkConfig.sh
However, I don't think ${TCL_BIN_DIR} and ${TK_BIN_DIR} are currently
visible in GDB's Makefile, so I'm not planning to add these
dependencies at this time.
In this commit I add a new variable config_status_deps which holds the
list of all the dependencies for config.status, with the $(srcdir)
prefix included, and then I use this in the config.status rule.
After this commit config.status will regenerate if config.bfd changes,
which it wouldn't before, but nothing else changes.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
The gcore script is initially generated by the configure process, just
like gdb-gdb.gdb and gdb-gdb.py. However if the gdb/gcore.in input
source is modified then 'make all' in the gdb/ directory does not
regenerate the gcore script.
This is different than the gdb-gdb.gdb and gdb-gdb.py files, if their
input is updated then 'make all' will regenerate these files.
The difference is that for gdb-gdb.* there is an explicit dependency
between the 'all' target and the generated file, this dependency is
missing for gcore.
This commit adds the dependency. Now, if gcore.in is changed, running
'make all' will regenerate the gcore script.
There is no change in _what_ is generated after this commit.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
The motivation for this change is for analysis tools and IDEs to be
better at analyzing header files on their own.
There are some definitions and includes we want to occur at the very
beginning of all translation units. The way we currently do that is by
requiring all source files (.c and .cc files) to include one of defs.h
(for gdb), server.h (for gdbserver) of common-defs.h (for gdbsupport and
shared source files). These special header files define and include
everything that needs to be included at the very beginning. Other
header files are written in a way that assume that these special
"prologue" header files have already been included.
My problem with that is that my editor (clangd-based) provides a very
bad experience when editing header files. Since clangd doesn't know
that one of defs.h/server.h/common-defs.h was included already, a lot of
things are flagged as errors. For instance, CORE_ADDR is not known.
It's possible to edit the files in this state, but a lot of the power of
the editor is unavailable.
My proposal to help with this is to include those things we always want
to be there using the compilers' `-include` option. Tom Tromey said
that the current approach might exist because not all compilers used to
have an option like this. But I believe that it's safe to assume they
do today.
With this change, clangd picks up the -include option from the compile
command, and is able to analyze the header file correctly, as it sees
all that stuff included or defined by that -include option. That works
because when editing a header file, clangd tries to get the compilation
flags from a source file that includes said header file.
This change is a bit self-serving, because it addresses one of my
frustrations when editing header files, but it might help others too.
I'd be curious to know if others encounter the same kinds of problems
when editing header files. Also, even if the change is not necessary by
any means, I think the solution of using -include for stuff we always
want to be there is more elegant than the current solution.
Even with this -include flag, many header files currently don't include
what they use, but rather depend on files included before them. This
will still cause errors when editing them, but it should be easily
fixable by adding the appropriate include. There's no rush to do so, as
long as the code still compiles, it's just a convenience thing.
The changes are:
- Add the appropriate `-include` option to the various Makefiles.
- There is one particularity for gdbserver's Makefile: we do not want
to include server.h when building `gdbreplay.o`, as `gdbreplay.cc`
doesn't include it. So we can't simply put the `-include` in
`INTERNAL_CFLAGS`. Add the `-include server.h` option to the
`COMPILE` and `IPAGENT_COMPILE` variables, and added a special rule
to compile `gdbreplay.o` with `-include gdbsupport/common-defs.h`.
- Remove the `-include` option from the `check-headers` rule in
gdb/Makefile.in, since it is already included in `INTERNAL_CFLAGS`.
Change-Id: If3e345d00a9fc42336322f1d8286687d22134340
Approved-By: Pedro Alves <pedro@palves.net>
Remove `INTERNAL_CFLAGS_BASE` and `INTERNAL_WARN_CFLAGS`, inline their
contents in `INTERNAL_CFLAGS`. Not functional changes expected.
Change-Id: I6a09794835ca2cfd4a88a3e9f2e627c8f5bd569f
Approved-By: Pedro Alves <pedro@palves.net>
Reformat some variables definitions. I think it makes them easier to
read, and it also makes diffs clearer.
Change-Id: I82f63ba0e6d0fe268eb1f1ad5ab22c3cd016ab02
Approved-By: Pedro Alves <pedro@palves.net>
This commit is part of a series to share more of the x86 target
description creation code between GDB and gdbserver.
Unlike previous commits which were mostly refactoring, this commit is
the first that makes a real change, though that change should mostly
be for gdbserver; I've largely adopted the "GDB" way of doing things
for gdbserver, and this fixes a real gdbserver bug.
On a x86-64 Linux target, running the test:
gdb.server/connect-with-no-symbol-file.exp
results in two core files being created. Both of these core files are
from the inferior process, created after gdbserver has detached.
In this test a gdbserver process is started and then, after gdbserver
has started, but before GDB attaches, we either delete the inferior
executable, or change its permissions so it can't be read. Only after
doing this do we attempt to connect with GDB.
As GDB connects to gdbserver, gdbserver attempts to figure out the
target description so that it can send the description to GDB, this
involves a call to x86_linux_read_description.
In x86_linux_read_description one of the first things we do is try to
figure out if the process is 32-bit or 64-bit. To do this we look up
the executable via the thread-id, and then attempt to read the
architecture size from the executable. This isn't going to work if
the executable has been deleted, or is no longer readable.
And so, as we can't read the executable, we default to an i386 target
and use an i386 target description.
A consequence of using an i386 target description is that addresses
are assumed to be 32-bits. Here's an example session that shows the
problems this causes. This is run on an x86-64 machine, and the test
binary (xx.x) is a standard 64-bit x86-64 binary:
shell_1$ gdbserver --once localhost :54321 /tmp/xx.x
shell_2$ gdb -q
(gdb) set sysroot
(gdb) shell chmod 000 /tmp/xx.x
(gdb) target remote :54321
Remote debugging using :54321
warning: /tmp/xx.x: Permission denied.
0xf7fd3110 in ?? ()
(gdb) show architecture
The target architecture is set to "auto" (currently "i386").
(gdb) p/x $pc
$1 = 0xf7fd3110
(gdb) info proc mappings
process 2412639
Mapped address spaces:
Start Addr End Addr Size Offset Perms objfile
0x400000 0x401000 0x1000 0x0 r--p /tmp/xx.x
0x401000 0x402000 0x1000 0x1000 r-xp /tmp/xx.x
0x402000 0x403000 0x1000 0x2000 r--p /tmp/xx.x
0x403000 0x405000 0x2000 0x2000 rw-p /tmp/xx.x
0xf7fcb000 0xf7fcf000 0x4000 0x0 r--p [vvar]
0xf7fcf000 0xf7fd1000 0x2000 0x0 r-xp [vdso]
0xf7fd1000 0xf7fd3000 0x2000 0x0 r--p /usr/lib64/ld-2.30.so
0xf7fd3000 0xf7ff3000 0x20000 0x2000 r-xp /usr/lib64/ld-2.30.so
0xf7ff3000 0xf7ffb000 0x8000 0x22000 r--p /usr/lib64/ld-2.30.so
0xf7ffc000 0xf7ffe000 0x2000 0x2a000 rw-p /usr/lib64/ld-2.30.so
0xf7ffe000 0xf7fff000 0x1000 0x0 rw-p
0xfffda000 0xfffff000 0x25000 0x0 rw-p [stack]
0xff600000 0xff601000 0x1000 0x0 r-xp [vsyscall]
(gdb) info inferiors
Num Description Connection Executable
* 1 process 2412639 1 (remote :54321)
(gdb) shell cat /proc/2412639/maps
00400000-00401000 r--p 00000000 fd:03 45907133 /tmp/xx.x
00401000-00402000 r-xp 00001000 fd:03 45907133 /tmp/xx.x
00402000-00403000 r--p 00002000 fd:03 45907133 /tmp/xx.x
00403000-00405000 rw-p 00002000 fd:03 45907133 /tmp/xx.x
7ffff7fcb000-7ffff7fcf000 r--p 00000000 00:00 0 [vvar]
7ffff7fcf000-7ffff7fd1000 r-xp 00000000 00:00 0 [vdso]
7ffff7fd1000-7ffff7fd3000 r--p 00000000 fd:00 143904 /usr/lib64/ld-2.30.so
7ffff7fd3000-7ffff7ff3000 r-xp 00002000 fd:00 143904 /usr/lib64/ld-2.30.so
7ffff7ff3000-7ffff7ffb000 r--p 00022000 fd:00 143904 /usr/lib64/ld-2.30.so
7ffff7ffc000-7ffff7ffe000 rw-p 0002a000 fd:00 143904 /usr/lib64/ld-2.30.so
7ffff7ffe000-7ffff7fff000 rw-p 00000000 00:00 0
7ffffffda000-7ffffffff000 rw-p 00000000 00:00 0 [stack]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
(gdb)
Notice the difference between the mappings reported via GDB and those
reported directly from the kernel via /proc/PID/maps, the addresses of
every mapping is clamped to 32-bits for GDB, while the kernel reports
real 64-bit addresses.
Notice also that the $pc value is a 32-bit value. It appears to be
within one of the mappings reported by GDB, but is outside any of the
mappings reported from the kernel.
And this is where the problem arises. When gdbserver detaches from
the inferior we pass the inferior the address from which it should
resume. Due to the 32/64 bit confusion we tell the inferior to resume
from the 32-bit $pc value, which is not within any valid mapping, and
so, as soon as the inferior resumes, it segfaults.
If we look at how GDB (not gdbserver) figures out its target
description then we see an interesting difference. GDB doesn't try to
read the executable. Instead GDB uses ptrace to query the thread's
state, and uses this to figure out the if the thread is 32 or 64 bit.
If we update gdbserver to do it the "GDB" way then the above problem
is resolved, gdbserver now sees the process as 64-bit, and when we
detach from the inferior we give it the correct 64-bit address, and
the inferior no longer segfaults.
Now, I could just update the gdbserver code, but better, I think, to
share one copy of the code between GDB and gdbserver in gdb/nat/.
That is what this commit does.
The cores of x86_linux_read_description from gdbserver and
x86_linux_nat_target::read_description from GDB are moved into a new
file gdb/nat/x86-linux-tdesc.c and combined into a single function
x86_linux_tdesc_for_tid which is called from each location.
This new function does things the GDB way, the only changes are to
allow for the sharing; we now have a callback function to call the
first time that the xcr0 state is read, this allows for GDB and
gdbserver to perform their own initialisation as needed, and
additionally, the new function takes a pointer for where to cache the
xcr0 value, this isn't needed for this commit, but will be useful in a
later commit where gdbserver will want to read this cached xcr0
value.
Another thing to note about this commit is how the functions
i386_linux_read_description and amd64_linux_read_description are
handled. For now I've left these function as implemented separately
in GDB and gdbserver. I've moved the declarations of these functions
into gdb/nat/x86-linux-tdesc.h, but the implementations are left as
separate.
A later commit in this series will make these functions shared too,
but doing this is not trivial, so I've left that for a separate
commit. Merging the declarations as I've done here ensures that
everyone implements the function to the same API, and once these
functions are shared (in a later commit) we'll want a shared
declaration anyway.
Approved-By: John Baldwin <jhb@FreeBSD.org>
The other day on irc, we were discussing the "m_line" hack in
tui-out.c, and I mentioned that it would be nice to replace this with
a new ui_out_flag.
Later, I looked at ui_out_flag and found:
ui_source_list = (1 << 0),
... and sure enough, this is tested already.
This patch removes tui-out.[ch] and changes the TUI to use an ordinary
cli-out object without this flag set.
As far as I can tell, this doesn't affect behavior at all -- the TUI
tests all pass, and interactively I tried switching stack frames,
"list", etc, and it all seems to work.
New in v2: fixed the problem pointed out by Keith, and added a test
case for that scenario.
Reviewed-By: Andrew Burgess <aburgess@redhat.com>
aclocal picks up the relevant include paths from AC_CONFIG_MACRO_DIRS in
configure.ac, so there's no need to pass `-I ../config` here.
Passing `-I ../config` is actually annoying, because it makes the output
different between when the update is triggered by the maintainer mode
and when aclocal or autoreconf is ran with no special flags. The
difference in the output is due to the order of include paths being
different.
Change-Id: I2c963876516570842f20b4a6a470867e7a941006
Approved-By: Tom Tromey <tom@tromey.com>
This commit is the result of the following actions:
- Running gdb/copyright.py to update all of the copyright headers to
include 2024,
- Manually updating a few files the copyright.py script told me to
update, these files had copyright headers embedded within the
file,
- Regenerating gdbsupport/Makefile.in to refresh it's copyright
date,
- Using grep to find other files that still mentioned 2023. If
these files were updated last year from 2022 to 2023 then I've
updated them this year to 2024.
I'm sure I've probably missed some dates. Feel free to fix them up as
you spot them.
The TUI status line is called the "status" window in the
documentation, but not in the source. There, the relevant files are
named "tui-stack", which to me makes it sound like they have something
to do with backtraces. This patch renames them to "tui-status".
The gdb/testsuite/README file documents GDB_DEBUG and GDBSERVER_DEBUG
flags, which can be passed to make in order to enable debugging within
GDB or gdbserver respectively.
However, when I do:
make check-gdb GDB_DEBUG=infrun
I don't see the corresponding debug feature within GDB being enabled.
Nor does:
make check-gdb GDBSERVER_DEBUG=debug \
RUNTESTFLAGS="--target_board=native-extended-gdbserver"
Appear to enable gdbserver debugging.
I tracked this down to the GDB_DEBUG and GDBSERVER_DEBUG flags being
missing from the TARGET_FLAGS_TO_PASS variable in gdb/Makefile. This
variable already contains lots of testing related flags, like
RUNTESTFLAGS and TESTS, so I think it makes sense to add GDB_DEBUG and
GDBSERVER_DEBUG here too.
With this done, this debug feature is now working as expected.
Approved-By: Tom Tromey <tom@tromey.com>
The make-check-all.sh script (gdb/testsuite/make-check-all.sh) is
great, it makes it super easy to run some test(s) using all the
available board files.
This commit aims to make this script even easier to access by adding a
check-all-boards target to the GDB Makefile. This new target checks
for (and requires) a number of environment variables, so the target
should be used like this:
make check-all-boards GDB_TARGET_USERNAME=remote-target \
GDB_HOST_USERNAME=remote-host \
TESTS="gdb.base/break.exp"
Where GDB_TARGET_USERNAME and GDB_HOST_USERNAME are the user names
that should be passed to the make-check-all.sh --target-user and
--host-user command line options respectively.
My personal intention is to set these variables in my environment, so
all I'll need to do is:
make check-all-boards TESTS="gdb.base/break.exp"
The make rule always passes --keep-results to the make-check-all.sh
script, as I find that the most useful. It's super frustrating to run
the tests and realise you forgot that option and the results have been
discarded.
Now that all places using gdb::string_view have been updated to use
std::string_view, this patch drops the gdb::string_view implementation
and the tests which came with it.
As this drops the unittests/string_view-selftests.c, this also
implicitly solves PR build/23676, as pointed-out by Tom Tromey.
Change-Id: Idf5479b09e0ac536917b3f0e13aca48424b90df0
Approved-By: Tom Tromey <tom@tromey.com>
Approved-By: Pedro Alves <pedro@palves.net>
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=23676
The previous patch migrated all the uses of gdb::optional to use
std::optional instead, so gdb::optional can be removed entirely
as well as the self-tests which came with it.
Change-Id: I96ecd67b850b01be10ef00eb85a78ac647d5adc7
Approved-By: Tom Tromey <tom@tromey.com>
Approved-By: Pedro Alves <pedro@palves.net>
In the interest of shrinking dwarf2/read.c a little more, this patch
moves the code that deciphers .debug_aranges into a new file.
Reviewed-By: Guinevere Larsen <blarsen@redhat.com>
The SME (Scalable Matrix Extension) [1] exposes a new matrix register ZA with
variable sizes. It also exposes a new mode called streaming mode.
Similarly to SVE, the ZA register size is dictated by a vector length, but the
SME vector length is called streaming vetor length. The total size for
ZA in a given moment is svl x svl.
In streaming mode, the SVE registers have their sizes based on svl rather than
the regular vector length (vl).
The feature detection is controlled by the HWCAP2_SME bit, but actual support
should be validated by attempting a ptrace call for one of the new register
sets: NT_ARM_ZA and NT_ARM_SSVE.
Due to its large size, the ZA register is exposed as a vector of bytes, but we
introduce a number of pseudo-registers that gives various different views
into the ZA contents. These can be arranged in a couple categories: tiles and
tile slices.
Tiles are matrices the same size or smaller than ZA. Tile slices are vectors
which map to ZA's rows/columns in different ways.
A new dynamic target description is provided containing the ZA register, the SVG
register and the SVCR register. The size of ZA, like the SVE vector registers,
is based on the vector length register SVG (VG for SVE).
This patch enables SME register support for gdb.
[1] https://community.arm.com/arm-community-blogs/b/architectures-and-processors-blog/posts/scalable-matrix-extension-armv9-a-architecture
Co-Authored-By: Ezra Sitorus <ezra.sitorus@arm.com>
Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
In preparation to the SME support patches, rename the SVE-specific files to
something a bit more meaningful that can be shared with the SME code.
In this case, I've renamed the "sve" in the names to "scalable".
No functional changes.
Regression-tested on aarch64-linux Ubuntu 22.04/20.04.
Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
psympriv.h was intended for use by code that created partial symbols.
Now that no generic code needs psymtab.h any more, psympriv.h can be
merged into psymtab.h.
When building gdb with -O2 -flto on openSUSE Tumbleweed (using bison 3.8.2) I
run into:
...
ada-exp.c.tmp:653: warning: type 'yysymbol_kind_t' violates the C++ One \
Definition Rule [-Wodr]
c-exp.c.tmp:398: note: an enum with different value name is defined in \
another translation unit
ada-exp.c.tmp:660: note: name 'YYSYMBOL_NULL_PTR' differs from name \
'YYSYMBOL_COMPLEX_INT' defined in another translation unit
c-exp.c.tmp:405: note: mismatching definition
...
Fix this by renaming to ada_exp_yysymbol_kind_t and likewise for other .y
files.
Tested on x86_64-linux.
PR build/22395
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=22395
When building gdb with -O2 -flto I run into:
...
ada-exp.c.tmp:576:7: error: type ‘union YYSTYPE’ violates the C++ One \
Definition Rule [-Werror=odr]
...
Fix this by renaming to ada_exp_YYSTYPE and likewise for other .y files.
Likewise for yyalloc.
Tested on x86_64-linux. Also tested with byacc rather than bison on
suggestion of Tom Tromey.
Approved-By: Tom Tromey <tom@tromey.com>
PR build/22395
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=22395
This reverts commit 02601231fd.
This commit was a refactoring to remove an xrealloc and simplify
utils.[ch]. However, it has a flaw -- it mishandles a substitution
like "$datadir/subdir".
I am backing out the patch in the interests of fixing the regression
before GDB 14. It can be reinstated (with modifications) later if we
like.
Regression tested on x86-64 Fedora 36.
This adds a new Python function, gdb.execute_mi, that can be used to
invoke an MI command but get the output as a Python object, rather
than a string. This is done by implementing a new ui_out subclass
that builds a Python object.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=11688
Reviewed-By: Eli Zaretskii <eliz@gnu.org>
Ada can import C APIs and also export Ada constructs to C via Pragma
Import and Pragma Export. This patch adds support for these to gdb,
by arranging to either defer some aspects of a symbol to the
underlying C symbol (for Import) or by introducing a second symbol
(for Export). A somewhat tricky approach is needed, both because gdb
doesn't generally handle symbol aliasing, and because Ada treats
symbol names in an unusual way (as compared to the rest of gdb).
This simplifies auto_load_expand_dir_vars to first split the string,
then do any needed substitutions. This was suggested by Simon, and is
much simpler than the current approach.
Then this patch also removes substitute_path_component, as it is no
longer called. This is nice because it helps with the long term goal
of removing utils.h.
Regression tested on x86-64 Fedora 36.
I'd like to move some things so they become methods on struct ui. But
first, I think that struct ui and the related things are big enough to
deserve their own file, instead of being scattered through top.{c,h} and
event-top.c.
Change-Id: I15594269ace61fd76ef80a7b58f51ff3ab6979bc
Some systems may install binutils headers into a system location
(e.g. /usr/local/include on FreeBSD) which may also include headers
for other external packages used by GDB such as zlib or zstd. If a
system include path such as /usr/local/include is added before local
include paths to directories within a clone or release tarball, then
headers from the external binutils package are used which can result
in build failures if the external binutils package is out of sync with
the version of GDB being built.
To fix, sort the include paths in INTERNAL_CFLAGS_BASE to add CFLAGS
for "local" componenets before external components.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30214
Reviewed-By: Tom Tromey <tom@tromey.com>
The recent work to have gdb link via libtool means that there are a
couple more generated files in the build directory that should be
removed by "distclean".
Note that gdb can't really fully implement distclean due to the desire
to put certain generated files into the distribution. Still, it can
get pretty close.
I noticed that the --disable-gdbmi option was broken for almost a year
(since 740b42ceb7 "gdb/python/mi: create MI commands using python").
The problem today is the python/py-cmd.c file. It is included in the
build if Python support is enabled, and it calls into some MI functions
(e.g. insert_mi_cmd_entry). If MI support is disabled, we get some
undefined symbols like:
mold: error: undefined symbol: insert_mi_cmd_entry(std::unique_ptr<mi_command, std::default_delete<mi_command> >)
>>> referenced by py-micmd.c
>>> python/py-micmd.o:(micmdpy_install_command(micmdpy_object*))
The python/py-cmd.c file should be included in the build if both Python
and MI support are enabled. It is not a case we support today, but it
could be done with a bit more configure code. However, I think we
should just remove the --disable-gdbmi option, and just include MI
support unconditionally.
Tom Tromey proposed a while ago to remove this option, but it ended
staying:
https://inbox.sourceware.org/gdb-patches/20180628172132.28843-1-tom@tromey.com/
However, there was no strong opposition to remove it. The argument was
just "bah, it doesn't hurt anybody".
But given today's case, I would rather remove complexity rather than add
some. I couldn't find anybody caring deeply for that option, and it's
not like MI adds any external dependency. It's just a bit more code.
Removing the option will not break anybody using --disable-gdbmi (it can
be found in many build scripts [1]), since we don't flag invalid
configure flags.
So, remove the option from configure.ac, and adjust Makefile.in
accordingly to always include the MI objects in the build.
[1] https://github.com/search?q=%22--disable-gdbmi%22&type=code
Change-Id: Ifcaa8c9fc4abc6fa686ed5fd984598644f745240
Approved-By: Tom Tromey <tom@tromey.com>
Commit 18b4d0736b ("gdb: initial support for ROCm platform (AMDGPU)
debugging") missed adding these header files to the HFILES_NO_SRCDIR
list in the Makefile. Fix that now.
Change-Id: Ifd387096aef3d147b51aefa2037da5bf6373ea64
Move everything related to reading .debug_names from read.c to
read-debug-names.c. The only entry point exposed by
read-debug-names.{c,h} is dwarf2_read_debug_names.
Change-Id: I18b23f3c7a61b14abc3a46e4bf559bc2d078e8bc
Approved-By: Tom Tromey <tom@tromey.com>
