Also fix a place where %lld was wrongly used to print a dwarf_vma.
* configure.ac: Check for long long and sizes of long long and long.
* elfcomm.h (HOST_WIDEST_INT): Test HAVE_LONG_LONG in place of
__STDC_VERSION__ and __GNUC__.
* strings.c (print_strings): Likewise.
* dwarf.c (DWARF_VMA_FMT, DWARF_VMA_FMT_LONG): Likewise.
(read_debug_line_header): Use dwarf_vmatoa to print warning.
* configure: Regenerate.
* config.in: Regenerate.
PR binutils/17512
* objdump.c (display_any_bfd): Avoid infinite loop closing and
opening the same archive again and again.
* archive64.c (bfd_elf64_archive_slurp_armap): Add range checks.
* libbfd.c (safe_read_leb128): New function.
* libbfd-in.h (safe_read_leb128): Add prototype.
* libbfd.h: Regenerate.
* elf-attrs.c (_bfd_elf_parse_attributes): Use safe_read_leb128.
Check for an over-long subsection length.
* elf.c (elf_parse_notes): Check that the namedata is long enough
for the string comparison that is about to be performed.
(elf_read_notes): Zero-terminate the note buffer.
PR binutils/17531
* dwarf.c (display_debug_frames): Check for a negative
augmentation data length.
(display_gdb_index): Check for invalid offsets.
* elfcomm.c (process_archive_index_and_symbols): Check for an
index number that overflows when multiplied by the ar index size.
* readelf.c (dump_ia64_unwind): Add range checks.
(slurp_ia64_unwind_table): Change to a boolean function. Add
range checks.
(process_version_sections): Add range checks.
(get_symbol_version_string): Add check for missing section
headers.
PR binutils/17512
* objdump.c (free_debug_section): Reset the compress_status as
well.
* compress.c (bfd_get_full_section_contents): Fail if there are no
section contents available when the compress_status is
COMPRESS_SECTION_DONE.
* libbfd.c (bfd_malloc): Refuse to allocate a negative size.
(bfd_malloc2): Use bfd_malloc.
(bfd_realloc): Refuse to reallocate a negative size.
(bfd_realloc2): Use bfd_realloc.
(bfd_realloc_or_free): Use bfd_realloc.
(bfd_zmalloc): Use bfd_malloc.
(bfd_zmalloc): Use bfd_malloc2.
* opncls.c (bfd_alloc): Refuse to allocate a negative size.
PR binutils/17512
* dwarf.h (struct dwarf_section): Add user_data field.
* dwarf.c (frame_need_space): Check for an over large register
number.
(display_debug_frames): Check the return value from
frame_need_space. Check for a CFA expression that is so long the
start address wraps around.
(debug_displays): Initialise the user_data field.
* objdump.c (load_specific_debug_section): Save the BFD section
pointer in the user_data field of the dwarf_section structure.
(free_debug_section): Update BFD section data when freeing section
contents.
* readelf.c (load_specific_debug_section): Initialise the
user_data field.
* archive.c (do_slurp_coff_armap): Add range checks to prevent
running off the end of the string table.
* compress.c (bfd_get_full_section_contents): Return a NULL
pointer for zero sized sections. Do not attempt to copy a buffer
onto itself.
* elf-attrs.c (_bfd_elf_parse_attributes): Check for an empty
header. Add range checks to avoid running off the end of the
section.
* elf.c (bfd_elf_get_str_section): Seek before allocating so that
if the seek fails, no memory is allocated.
(bfd_elf_string_from_elf_section): Do not allocate a string from a
non string section. It only leads to trouble later on.
(_bfd_elf_print_private_bfd_data): Check for there being too
little external dynamic data.
(bfd_section_from_shdr): Replace assertion with a failure mode.
(bfd_section_from_shdr): When walking a loaded group section use
the internal structure size, not the external size. Check for the
group section being empty.
* elf32-i386.c (elf_i386_rtype_to_howto): Replace assertion with a
failure mode.
* elfcode.h (elf_slurp_reloc_table): Likewise.
* reloc.c (bfd_perform_relocation): Avoid seg-fault if the howto
parameter is NULL.
PR binutils/17531
* dwarf.c (process_cu_tu_index): Check for an out of range row
index.
* elfcomm.c (adjust_relative_path): Change name_len parameter to
an unsigned long. Check for path length overflow.
(process_archive_index_and_symbols): Check for invalid header
size.
(setup_archive): Add checks for invalid archives.
(get_archive_member_name): Add range checks.
* elfcomm.h (adjust_relative_path): Update prototyoe.
* readelf.c (process_archive): Add range checks.
PR binutils/17531
* readelf.c (get_data): Move excessive length check to earlier on
in the function and allow for wraparound in the arithmetic.
(get_32bit_elf_symbols): Terminate early if the section size is
zero. Check for an invalid sh_entsize. Check for an index
section with an invalid size.
(get_64bit_elf_symbols): Likewise.
(process_section_groups): Check for an invalid sh_entsize.
PR binutils/17512
* dwarf.c (display_block): Do nothing if the block starts after
the end of the buffer.
(read_and_display_attr_value): Add range checks.
(struct Frame_Chunk): Make the ncols and ra fields unsigned.
(frame_need_space): Test for an ncols of zero.
(read_cie): Fail if the augmentation data extends off the end of
the buffer.
(display_debug_frames): Add checks for read_cie failing. Add
range checks.
* coff-h8300.c (rtype2howto): Replace abort with returning a NULL
value.
* coff-h8500.c (rtype2howto): Likewise.
* coff-tic30.c (rtype2howto): Likewise.
* coff-z80.c (rtype2howto): Likewise.
* coff-z8k.c (rtype2howto): Likewise.
* coff-ia64.c (RTYPE2HOWTO): Always return a valid howto.
* coff-m68k.c (m68k_rtype2howto): Return a NULL howto if none
could be found.
* coff-mcore.c (RTYPE2HOWTO): Add range checking.
* coff-w65.c (rtype2howto): Likewise.
* coff-we32k.c (RTYPE2HOWTO): Likewise.
* pe-mips.c (RTYPE2HOWTO): Likewise.
* coff-x86_64.c (coff_amd64_reloc): Likewise. Replace abort with
an error return.
* coffcode.h (coff_slurp_reloc_table): Allow the rel parameter to
be unused.
* coffgen.c (make_a_section_from_file): Check the length of a
section name before testing to see if it is a debug section name.
(coff_object_p): Zero out any uninitialised bytes in the opt
header.
* ecoff.c (_bfd_ecoff_slurp_symbolic_info): Test for the raw
source being empty when there are values to be processed.
(_bfd_ecoff_slurp_symbol_table): Add range check.
* mach-o.c (bfd_mach_o_canonicalize_one_reloc): Likewise.
(bfd_mach_o_mangle_sections): Move test for too many sections to
before the allocation of the section table.
(bfd_mach_o_read_symtab_strtab): If the read fails, free the
memory and nullify the symbol pointer.
* reloc.c (bfd_generic_get_relocated_section_contents): Add
handling of a bfd_reloc_notsupported return value.
* versados.c (EDATA): Add range checking.
(get_record): Likewise.
(process_otr): Check for contents being available before updating
them.
(versados_canonicalize_reloc): Add range check.
Both readelf/objdump know how to get symbol version string for dynamic
symbols. This patch extracts this functionality into a separate
function and uses it to add symbol version string to versioned symbol
names when dumping dynamic relocations.
bfd/
PR binutils/16496
* elf-bfd.h (bfd_elf_get_symbol_version_string): New.
* elf.c (bfd_elf_get_symbol_version_string): New. Extracted
from bfd_elf_print_symbol.
(bfd_elf_print_symbol): Use it.
binutils/
PR binutils/16496
* objdump.c (objdump_print_symname): Call
bfd_elf_get_symbol_version_string to get ELF symbol version
string. Append version string if needed.
* readelf.c (versioned_symbol_info): New enum.
(get_symbol_version_string): New. Extracted from
process_symbol_table.
(dump_relocations): Add a new argument to indicate if dynamic
symbol table is used. Use get_symbol_version_string to get
symbol version string for dynamic symbol. Append version string
if needed.
(process_relocs): Updated dump_relocations call.
(process_symbol_table): Use get_symbol_version_string.
ld/testsuite/
PR binutils/16496
* ld-cris/weakref3.d: Add symbol version string to versioned
symbol names in dynamic relocation.
* ld-cris/weakref4.d: Likewise.
* ld-elfvers/vers24.rd: Likewise.
* ld-elf/pr16496a.c: New file.
* ld-elf/pr16496a.map: Likewise.
* ld-elf/pr16496b.c: Likewise.
* ld-elf/pr16496b.od: Likewise.
* ld-elf/shared.exp (build_tests): Add libpr16496a.so and
libpr16496b.so tests.
PR binutils/17512
* dwarf.c (get_encoded_value): Check for an encoded size of 0.
(display_debug_lines_raw): Check for an invalid line range value.
(display_debug_frames): Check for corrupt augmentation data.
* coffgen.c (coff_get_normalized_symtab): Check for an excessive
number of auxillary entries.
* ieee.c (next_byte): Convert to a function. Return FALSE if the
next byte is beyond the end of the buffer.
(parse_int): Test the return value of next_byte.
(parse_expression): Convert to boolean. Return FALSE if the
parsing failed. Test the return value of next_byte.
(ieee_seek): Convert to a function. Return FALSE if the seek goes
beyond the end of the buffer.
(ieee_slurp_external_symbols): Test the return value of ieee_seek
and next_byte.
(ieee_slurp_sections): Convert to boolean. Return FALSE if the
operation failed. Test the return value of ieee_seek and
next_byte.
(ieee_archive_p): Test the return value of ieee_seek and
next_byte.
(do_one): Likewise.
(ieee_slurp_section_data): Likewise.
(ieee_object_p): Likewise. Store the size of the buffer in the
total_amt field in the header.
* libieee.h (common_header_type): Add amt field.
* mach-o.c (bfd_mach_o_canonicalize_one_reloc): Check that the
reloc's value is within range.
(bfd_mach_o_read_symtab_symbols): Nullify the symbols field if the
operation fails.
* pei-x86_64.c (pex64_xdata_print_uwd_codes): Replace abort with
an error message.
(pex64_dump_xdata): Check for buffer overflows.
* versados.c (process_otr): Check that the section exists before
taking its size.
(versados_object_p): Make sure that enough data was read for the
header to be checked.
* vms-alpha.c (vms_get_remaining_object_record): Change
read_so_far parameter to an unsigned int. Check that the amount
read is in range.
This is the updated version using uintptr_t as Alan Modra suggested.
2014-11-18 Jan-Benedict Glaw <jbglaw@lug-owl.de>
* dwarf.c (process_extended_line_op): Fix signedness warning.
PR binutils/17512
* peXXIgen.c (pe_print_pdata): Fail if the section's virtual size
is larger than its real size.
(rsrc_print_section): Fix off-by-one error checking for overflow.
* pei-x86_64.c (pex64_bfd_print_pdata): Handle empty unwind
sections.
* dwarf.c (get_encoded_value): Warn and return if the encoded
value is more than 64-bits long.
(SAFE_BYTE_GET): Do not attempt to read more than 64-bits.
(process_extended_line_op): Add more range checks.
(decode_location_expression): Use the return value from
display_block. Add more range checks.
(read_debug_line_header): Add range check.
(display_debug_lines_raw): Add range checks.
(display_debug_frames): Silently skip multiple zero terminators.
Add range checks.
(process_cu_tu_index): Check for non-existant or empty sections.
Use SAFE_BYTE_GET instead of byte_get.
PR binutils/17531
* readelf.c (get_unwind_section_word): Skip reloc processing if
there are no relocs associated with the section.
(decode_tic6x_unwind_bytecode): Warn and return if the stack
pointer adjustment falls off the end of the buffer.
PR binutils/17512
* dwarf.c (get_encoded_value): Add an 'end' parameter. Change the
'data' parameter to a double pointer and return the updated value.
(decode_location_expression): Update call to get_encoded_value.
(frame_need_space): Handle the case where one or both of the
mallocs fails.
(read_cie): Initialise the cie pointer, even if the read fails.
(display_debug_frames): Warn if the calculated block_end is before
the start of the block. Break the loop if the CIE could not be
read. Update call to get_encoded_value. Warn if the read CFA
expressions are too big.
* ieee.c (ieee_archive_p) Skip processing if no bytes are read at
all.
(ieee_object_p): Likewise.
PR binutils/17531
* readelf.c (process_version_sections): If the read of the version
def information fails, make sure that the external verdef data is
not used.
(get_dynamic_data): Do not attempt to allocate memory for more
dynamic data than there is in the file. If the read fails, free
the allocated buffer.
(process_symbol_table): Do not print dynamic information if we
were unable to read the dynamic symbol table.
(print_gnu_note): Do not print the note if the descsz is too
small.
PR binutils/17512
* dwarf.c (read_and_display_attr_value): Check that we do not read
past end.
(display_debug_pubnames_worker): Add range checks.
(process_debug_info): Check for invalid pointer sizes.
(display_loc_list): Likewise.
(display_loc_list_dwo): Likewise.
(display_debug_ranges): Likewise.
(display_debug_aranges): Check for invalid address size.
(read_cie): Add range checks. Replace call strchr with while loop.
* objdump.c (dump_dwarf): Replace abort with a warning message.
(print_section_stabs): Improve range checks.
* rdcoff.c (coff_get_slot): Use long for indx parameter type.
Add check for an excesively large index.
* rddbg.c (read_section_stabs_debugging_info): Zero terminate the
string table. Avoid walking off the end of the stabs data.
* stabs.c (parse_stab_string): Add check for a NULL name.
PR binutils/17512
* coffcode.h (coff_slurp_line_table): Set the line number of
corrupt entries to -1.
(coff_slurp_symbol_table): Alway initialise the value of the
symbol.
* coffgen.c (coff_print_symbol): Check that the combined pointer
is valid.
(coff_print_symbol): Do not print negative line numbers.
* peXXigen.c (pe_print_idata): Add range checking displaying
member names.
PR binutils/17531
* binutils/readelf.c (dynamic_nent): Change type to size_t.
(slurp_rela_relocs): Use size_t type for nrelas.
(slurp_rel_relocs): Likewise.
(get_program_headers): Improve out of memory error message.
(get_32bit_section_headers): Likewise.
(get_32bit_section_headers): Likewise.
(get_64bit_section_headers): Likewise.
(get_32bit_elf_symbols): Likewise.
(get_64bit_elf_symbols): Likewise.
(process_section_groups): Likewise.
(get_32bit_dynamic_section): Likewise.
(get_64bit_dynamic_section): Likewise.
(process_dynamic_section): Likewise.
(process_version_sections): Likewise.
(get_symbol_index_type): Likewise.
(process_mips_specific): Likewise.
(process_corefile_note_segment): Likewise.
(process_version_sections): Use size_t type for total.
(get_dynamic_data): Change type of number parameter to size_t.
Improve out of memory error messages.
(process_symbol_table): Change type of nbuckets and nchains to
size_t. Skip processing of sections headers if there are none.
Improve out of memory error messages.
PR binutils/17531
* (ia64_process_unwind): Replace assertion with an error message.
Add range checking for group section indicies.
(hppa_process_unwind): Replace assertion with an error message.
(process_syminfo): Likewise.
(decode_arm_unwind_bytecode): Add range checking.
(dump_section_as_strings): Add more string range checking.
(display_tag_value): Likewise.
(display_arm_attribute): Likewise.
(display_gnu_attribute): Likewise.
(display_tic6x_attribute): Likewise.
(display_msp430x_attribute): Likewise.
PR binutils/17531
* readelf.c (get_data): Avoid allocating memory when we know that
the read will fail.
(find_section_by_type): New function.
(get_unwind_section_word): Check for invalid symbol indicies.
Check for invalid reloc types.
(get_32bit_dynamic_section): Add range checks.
(get_64bit_dynamic_section): Add range checks.
(process_dynamic_section): Check for a corrupt time value.
(process_symbol_table): Add range checks.
(dump_section_as_strings): Add string length range checks.
(display_tag_value): Likewise.
(display_arm_attribute): Likewise.
(display_gnu_attribute): Likewise.
(display_tic6x_attribute): Likewise.
(display_msp430x_attribute): Likewise.
(process_mips_specific): Add range check.
PR binutils/17552, binutils/17533
* bucomm.c (is_valid_archive_path): New function. Returns false
for absolute pathnames and pathnames that include /../.
* bucomm.h (is_valid_archive_path): Add prototype.
* ar.c (extract_file): Use new function to check for valid
pathnames when extracting files from an archive.
* objcopy.c (copy_archive): Likewise.
* doc/binutils.texi: Update documentation to mention the
limitation on pathname of archive members.
PR binutils/15731
* readelf.c (printable_section_name): New function.
(printable_section_name_from_index): New function.
(dump_relocations): Use new function.
(process_program_headers, get_32bit_elf_symbols,
(get_64bit_elf_symbols, process_section_headers,
(process_section_groups, process_relocs, ia64_process_unwind,
(hppa_process_unwind, get_unwind_section_word, decode_arm_unwind,
(arm_process_unwind, process_version_sections,
(process_symbol_table, apply_relocations, get_section_contents,
(dump_section_as_strings, dump_section_as_bytes,
(display_debug_section, process_attributes, process_mips_specific,
(process_mips_specific process_gnu_liblist): Likewise.
(get_unwind_section_word): Check for a missing symbol table.
Replace aborts with error messages.
(arm_process_unwind): Check for a missing string table.
(process_attributes): Check for an attribute length that is too
small.
(process_mips_specific): Check for a corrupt GOT symbol offset.
PR binutils/17531
(get_32bit_program_headers): Verify program header entry size
before reading in the program headers.
(get_64bit_program_headers): Likewise.
(get_unwind_section_word): Do nothing if no section was provided.
Fail if the offset is outside of the section.
(print_dynamic_symbol): Catch out of range symbol indicies.
(process_mips_specific): Likewise.
(process_attributes): Make sure that there is enough space left in
the section before attempting to read the length of the next
attribute.
PR binutils/17531
* readelf.c (get_data): If the reason parameter is null, do not
print any error messages.
(get_32bit_section_headers): Verify section header entry size
before reading in the section headers.
(get_64bit_section_headers): Likewise.
(process_section_headers): Pass FALSE to get_section_headers.
(get_file_header): Pass TRUE to get_section_headers.
(process_dynamic_section): Change an assert to an error message.
(process_symbol_table): Handle corrupt histograms.
PR binutils/17512
* objdump.c (slurp_symtab): Fail gracefully if the table could not
be read.
(dump_relocs_in_section): Likewise.
* aoutx.h (slurp_symbol_table): Check that computed table size is
not bigger than the file from which is it being read.
(slurp_reloc_table): Likewise.
* coffcode.h (coff_slurp_line_table): Remove unneeded local
'warned'. Do not try to print the details of a symbol with an
invalid index.
* coffgen.c (make_a_sectiobn_from_file): Check computed string
index against length of string table.
(bfd_coff_internal_syment_name): Check read in string offset
against length of string table.
(build_debug_section): Return a pointer to the section used.
(_bfd_coff_read_string_table): Store the length of the string
table in the coff_tdata structure.
(bfd_coff_free_symbols): Set the length of the string table to
zero when it is freed.
(coff_get_normalized_symtab): Check offsets against string table
or data table lengths as appropriate.
* cofflink.c (_bfd_coff_link_input_bfd): Check offset against
length of string table.
* compress.c (bfd_get_full_section_contents): Check computed size
against the size of the file.
* libcoff-in.h (obj_coff_strings_len): Define.
(struct coff_tdata): Add strings_len field.
* libcoff.h: Regenerate.
* peXXigen.c (pe_print_debugdata): Do not attempt to print the
data if the debug section is too small.
* xcofflink.c (xcoff_link_input_bfd): Check offset against
length of string table.
binutils:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* readelf.c (print_mips_isa_ext): Print the value of Octeon3.
gas:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* config/tc-mips.c (CPU_IS_OCTEON): Handle CPU_OCTEON3.
(mips_cpu_info_table): Octeon3 enables virt ase.
* doc/c-mips.texi: Document octeon3 as an acceptable value for
-march=.
gas/testsuite:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* gas/mips/mips.exp: Add support for Octeon3 architecture.
Also add in support for running Octeon3 tests.
* gas/mips/octeon3.d: New test.
* gas/mips/octeon3.s: New test source.
opcodes:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* mips-dis.c (mips_arch_choices): Add octeon3.
* mips-opc.c (IOCT): Include INSN_OCTEON3.
(IOCT2): Likewise.
(IOCT3): New define.
(IVIRT): New define.
(mips_builtin_opcodes): Add dmfgc0, dmtgc0, hypcall, mfgc0, mtgc0,
tlbinv, tlbinvf, tlbgr, tlbgwi, tlbginv, tlbginvf, tlbgwr, tlbgp, tlti
IVIRT instructions.
Extend mtm0, mtm1, mtm2, mtp0, mtp1, mtp2 instructions to take another
operand for IOCT3.
bfd:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* archures.c: Add octeon3 for mips target.
* bfd-in2.h: Regenerate.
* bfd/cpu-mips.c: Define I_mipsocteon3.
nfo_struct): Add octeon3 support.
* bfd/elfxx-mips.c: (_bfd_elf_mips_mach): Add support for
octeon3.
(mips_set_isa_flags): Add support for octeon3.
(bfd_mips_isa_ext): Add bfd_mach_mips_octeon3.
(mips_mach_extensions): Make bfd_mach_mips_octeon3 an
extension of bfd_mach_mips_octeon2.
(print_mips_isa_ext): Print the value of Octeon3.
