Fix commit 647d4de92e ("Test undefined symbols in shared libraries")
and remove "undefined symbols in shared lib (dyn reloc)" test failures
for MIPS and S+core targets.
This test assumes 3 dynamic relocation entries, however the respective
psABIs define an extra single dummy *_NONE relocation at the beginning
of the dynamic relocation table, which results in test output like the
following for MIPS:
Relocation section '.rel.dyn' at offset 0x33c contains 4 entries:
Offset Info Type Sym.Value Sym. Name
00000000 00000000 R_MIPS_NONE
00010364 00000903 R_MIPS_REL32 00000000 undef_pfun
00010360 00000a03 R_MIPS_REL32 00000000 undef_data
00010368 00000b03 R_MIPS_REL32 00000000 undef_notype
and S+core:
Relocation section '.rel.dyn' at offset 0x274 contains 4 entries:
Offset Info Type Sym.Value Sym. Name
00000000 00000000 R_SCORE_NONE
5ffe0464 00000e12 R_SCORE_REL32 00000000 undef_notype
5ffe045c 00000f12 R_SCORE_REL32 00000000 undef_data
5ffe0460 00001012 R_SCORE_REL32 00000000 undef_pfun
targets respectively, and also n64 MIPS targets pad relocation triplets
they use with extra *_NONE relocations, resulting in output like this:
Relocation section '.rel.dyn' at offset 0x4c0 contains 4 entries:
Offset Info Type Sym. Value Sym. Name
000000000000 000000000000 R_MIPS_NONE
Type2: R_MIPS_NONE
Type3: R_MIPS_NONE
000000010508 000900001203 R_MIPS_REL32 0000000000000000 undef_pfun
Type2: R_MIPS_64
Type3: R_MIPS_NONE
000000010500 000a00001203 R_MIPS_REL32 0000000000000000 undef_data
Type2: R_MIPS_64
Type3: R_MIPS_NONE
000000010510 000b00001203 R_MIPS_REL32 0000000000000000 undef_notype
Type2: R_MIPS_64
Type3: R_MIPS_NONE
Expect the right number of *_NONE relocations then, and adjust the total
number of relocations expected accordingly.
ld/
* testsuite/ld-undefined/undefined.exp: Correct the dyn reloc
test for MIPS and S+core targets.
PowerPC64 .cfi directives use DW_EH_PE_sdata4 encoding for .eh_frame,
so there is no real reason why .eh_frame should be 8 byte aligned.
gas/
* config/tc-ppc.h (EH_FRAME_ALIGNMENT): Define.
ld/
* testsuite/ld-powerpc/tlsopt5.wf: Update for reduced alignment.
Complement commit 26eebcf553 ("Update OpenBSD/mips64 support"),
<https://sourceware.org/ml/binutils/2005-04/msg00382.html>, which added
OpenBSD/mips64 support to GAS, and also add it to LD, avoiding a build
failure at the configuration stage, like:
*** ld does not support target mips64-unknown-openbsd
*** see ld/configure.tgt for supported targets
make[1]: *** [configure-ld] Error 1
As per OS support only include n64 MIPS emulations, and use the
traditional ones, matching the choice already made with the addition of
GAS support.
ld/
* configure.tgt <mips64el-*-openbsd*, mips64-*-openbsd*>: New
targets.
With -PIE on x86-64, we get
0x000000006ffffffb (FLAGS_1) Flags: GLOBAUDIT PIE
We should allow additional bits in DT_FLAGS_1.
PR ld/22139
* testsuite/ld-elf/globalaudit.rd: Allow additional bits in
DT_FLAGS_1.
bfd/
PR ld/22135
* elf32-i386.c (elf_i386_convert_load_reloc): Add an argument
to indicate if conversion is performed.
(elf_i386_check_relocs): Cache section contents and relocations
if conversion is performed.
* elf64-x86-64.c (elf_x86_64_check_relocs): Cache section
contents and relocations if conversion is performed.
ld/
PR ld/22135
* testsuite/ld-i386/i386.exp: Run pr22135.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-i386/pr22135.d: New file.
* testsuite/ld-i386/pr22135.s: Likewise.
* testsuite/ld-x86-64/pr22135.d: Likewise.
* testsuite/ld-x86-64/pr22135.s: Likewise.
This changes the PowerPC64 --plt-align option to perform the usual
alignment of code as suggested by its name, as well as the previous
behaviour of padding so as to reduce boundary crossing. The old
behaviour is had by using a negative parameter.
The default is also changed to align plt stub code by default to 32
byte boundaries, the point being to get better bctr branch prediction
on power8 and power9 hardware.
bfd/
* elf64-ppp.c (plt_stub_pad): Handle positive and negative
plt_stub_align.
ld/
* ld.texinfo (--plt-align): Describe new behaviour of option.
* emultempl/ppc64elf.em (params): Default plt_stub_align to 5.
* testsuite/ld-powerpc/powerpc.exp: Pass --no-plt-align for
selected tests.
* testsuite/ld-powerpc/relbrlt.d: Pass --no-plt-align.
* testsuite/ld-powerpc/elfv2so.d: Adjust expected output.
After _bfd_i386_elf_convert_load and _bfd_x86_64_elf_convert_load are
removed, elf_i386_convert_load_reloc and elf_x86_64_convert_load_reloc
see __ehdr_start as an undefined symbol when they are called from
check_relocs to convert GOT relocations against local symbols. But
__ehdr_start will be defined as a hidden symbol by linker at the later
stage if it is referenced. This patch marks __ehdr_start as a defined
local symbol at the start of check_relocs if it is referenced and not
defined.
bfd/
PR ld/22115
* elf32-i386.c (elf_i386_convert_load_reloc): Check linker_def.
Don't use UNDEFINED_WEAK_RESOLVED_TO_ZERO.
* elf64-x86-64.c (elf_x86_64_convert_load_reloc): Check
linker_def. Don't use UNDEFINED_WEAK_RESOLVED_TO_ZERO.
* elfxx-x86.c (_bfd_x86_elf_link_check_relocs): Set local_ref
and linker_def on __ehdr_start if it is referenced and not
defined.
(_bfd_x86_elf_link_symbol_references_local): Also set local_ref
and return TRUE when building executable, if a symbol has
non-GOT/non-PLT relocations in text section or there is no
dynamic linker.
* elfxx-x86.h (elf_x86_link_hash_entry): Add linker_def.
ld/
PR ld/22115
* ld-i386/i386.exp: Run PR ld/22115 tests,
* ld/testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-i386/pr22115-1.s: New file.
* testsuite/ld-i386/pr22115-1a.d: Likewise.
* testsuite/ld-i386/pr22115-1b.d: Likewise.
* testsuite/ld-i386/pr22115-1c.d: Likewise.
* testsuite/ld-i386/pr22115-1d.d: Likewise.
* testsuite/ld-x86-64/pr22115-1.s: Likewise.
* testsuite/ld-x86-64/pr22115-1a-x32.d: Likewise.
* testsuite/ld-x86-64/pr22115-1a.d: Likewise.
* testsuite/ld-x86-64/pr22115-1b-x32.d: Likewise.
* testsuite/ld-x86-64/pr22115-1b.d: Likewise.
* testsuite/ld-x86-64/pr22115-1c-x32.d: Likewise.
* testsuite/ld-x86-64/pr22115-1c.d: Likewise.
* testsuite/ld-x86-64/pr22115-1d-x32.d: Likewise.
* testsuite/ld-x86-64/pr22115-1d.d: Likewise.
Add R_X86_64_converted_reloc_bit to relocation type to indicate if a
relocation is converted from a GOTPCREL relocation. Linker now generates
failed to convert GOTPCREL relocation; relink with --no-relax
for all cases, including relocations against local symbols.
bfd/
* elf64-x86-64.c (R_X86_64_converted_reloc_bit): New.
(elf_x86_64_info_to_howto): Get the real relocation type by
masking out R_X86_64_converted_reloc_bit.
(elf_x86_64_check_tls_transition): Get the real relocation type
by masking out R_X86_64_converted_reloc_bit.
(elf_x86_64_convert_load_reloc): Set R_X86_64_converted_reloc_bit
instead of setting converted_reloc.
(elf_x86_64_relocate_section): Check R_X86_64_converted_reloc_bit
instead of converted_reloc. Get the real relocation type by
masking out R_X86_64_converted_reloc_bit.
(elf_x86_64_link_setup_gnu_properties): Verify that the value of
R_X86_64_converted_reloc_bit is valid.
* elfxx-x86.h (converted_reloc): Removed.
ld/
* testsuite/ld-x86-64/pr19609-2a.d: Updated.
* testsuite/ld-x86-64/pr19609-2b.d: Likewise.
* testsuite/ld-x86-64/pr19609-4a.d: Likewise.
* testsuite/ld-x86-64/pr19609-4c.d: Likewise.
When GOTPCREL relocation conversion leads to relocation overflow, we
may get a mysterious linker message, like
relocation truncated to fit: R_X86_64_32S against symbol `foo'
This patch changes the linker message to
failed to convert GOTPCREL relocation; relink with --no-relax
bfd/
* elf64-x86-64.c (elf_x86_64_convert_load_reloc): Remove the sec
argument. Don't check relocation overflow. Avoid relocation
overflow if --no-relax is used. Set converted_reloc on symbol
if a GOTPCREL relocation is converted.
(elf_x86_64_relocate_section): Issue a fatal error and suggest
--no-relax if GOTPCREL relocation conversion leads to relocation
overflow.
* elfxx-x86.h (elf_x86_link_hash_entry): Add converted_reloc.
ld/
* testsuite/ld-x86-64/pr19609-4e.d: Updated.
* testsuite/ld-x86-64/pr19609-6a.d: Likewise.
We need to set tlsdesc_plt for x86-64 if GOT_TLS_GDESC_P is true when
allocating dynamic relocations so that _bfd_x86_elf_size_dynamic_sections
will generate TLSDESC_PLT and TLSDESC_GOT in x86-64 output.
bfd/
PR ld/22071
* elfxx-x86.c (elf_x86_allocate_dynrelocs): Set tlsdesc_plt
for x86-64 if GOT_TLS_GDESC_P is true.
ld/
PR ld/22071
* testsuite/ld-x86-64/pr22071.d: New file.
* testsuite/ld-x86-64/pr22071.s: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run pr22071.
ld ought to be more clever about where it puts LTO recompiled objects.
Ideally the recompiled objects ought to be ordered to the same place
their IR objects were, and files extracted from archives on the second
pass ought to go in the same place as they would if extracted on the
first pass. This patch addresses the archive problem. Without this
fix, objects extracted from archives might be placed after the crt
files intended to go at the end of an executable or shared library,
possibly causing exception handling failures.
* ldlang.h (lang_input_statement_type): Expand comments.
(LANG_FOR_EACH_INPUT_STATEMENT): Rewrite without casts.
* ldlang.c (lang_for_each_input_file): Likewise.
(load_symbols): Set usrdata for archives.
(find_rescan_insertion): New function.
(lang_process): Trim off and reinsert entries added to file chain
when rescanning archives for LTO.
* ldmain.c (add_archive_element): Set my_archive input_statement
next pointer to last element added.
The machinery to do this was there, but not enabled if the terminator
was the only thing in the section.
bfd/
* elf-eh-frame.c (_bfd_elf_parse_eh_frame): Don't exit early
for a section containing just a terminator. Allow multiple
terminators at end of section.
* elflink.c (bfd_elf_discard_info): Iterate over .eh_frame
sections when not adding alignment. Assert on terminator in
the middle of FDEs.
ld/
* testsuite/ld-elf/eh3.d: Update.
* testsuite/ld-elf/eh4.d: Update.
Complement commit 5b5f4e6f8c ("ld: Early detection of orphans we know
will be discarded") and add `.MIPS.options' to the list of sections
discarded with orphan tests, removing failures like:
./ld-new: error: unplaced orphan section `.MIPS.options' from `tmpdir/orphan-11.o'.
FAIL: ld-elf/orphan-11
and:
./ld-new: error: unplaced orphan section `.MIPS.options' from `tmpdir/orphan-12.o'.
FAIL: ld-elf/orphan-12
from n64 MIPS testing.
ld/
* testsuite/ld-elf/orphan-11.ld: Also discard `.MIPS.options'
sections.
Fix a bug in commit a6ebf6169a ("MIPS: Convert cross-mode BAL to
JALX") and in BFD linker relaxation correct the microMIPS interpretation
of the branch offset, which is supposed to be shifted by 1 bit, rather
than 2 as in the regular MIPS case.
bfd/
* elfxx-mips.c (mips_elf_perform_relocation): Correct microMIPS
branch offset interpretation.
gas/
* testsuite/gas/mips/branch-addend-micromips.d: New test.
* testsuite/gas/mips/branch-addend-micromips-n32.d: New test.
* testsuite/gas/mips/branch-addend-micromips-n64.d: New test.
* testsuite/gas/mips/branch-addend-micromips.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* testsuite/ld-mips-elf/bal-jalx-addend-micromips.d: New test.
* testsuite/ld-mips-elf/bal-jalx-addend-micromips-n32.d: New
test.
* testsuite/ld-mips-elf/bal-jalx-addend-micromips-n64.d: New
test.
* testsuite/ld-mips-elf/bal-jalx-local-micromips.d: New test.
* testsuite/ld-mips-elf/bal-jalx-local-micromips-n32.d: New
test.
* testsuite/ld-mips-elf/bal-jalx-local-micromips-n64.d: New
test.
* testsuite/ld-mips-elf/bal-jalx-pic-micromips.d: New test.
* testsuite/ld-mips-elf/bal-jalx-pic-micromips-n32.d: New test.
* testsuite/ld-mips-elf/bal-jalx-pic-micromips-n64.d: New test.
* testsuite/ld-mips-elf/bal-jalx-pic-ignore-micromips.d: New
test.
* testsuite/ld-mips-elf/bal-jalx-pic-ignore-micromips-n32.d: New
test.
* testsuite/ld-mips-elf/bal-jalx-pic-ignore-micromips-n64.d: New
test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
In the TLS GD/LD to LE optimization, ld replaces a sequence like
addi 3,2,x@got@tlsgd R_PPC64_GOT_TLSGD16 x
bl __tls_get_addr(x@tlsgd) R_PPC64_TLSGD x
R_PPC64_REL24 __tls_get_addr
nop
with
addis 3,13,x@tprel@ha R_PPC64_TPREL16_HA x
addi 3,3,x@tprel@l R_PPC64_TPREL16_LO x
nop
When the tprel offset is small, this can be further optimized to
nop
addi 3,13,x@tprel
nop
bfd/
* elf64-ppc.c (struct ppc_link_hash_table): Add do_tls_opt.
(ppc64_elf_tls_optimize): Set it.
(ppc64_elf_relocate_section): Nop addis on TPREL16_HA, and convert
insn on TPREL16_LO and TPREL16_LO_DS relocs to use r13 when
addis would add zero.
* elf32-ppc.c (struct ppc_elf_link_hash_table): Add do_tls_opt.
(ppc_elf_tls_optimize): Set it.
(ppc_elf_relocate_section): Nop addis on TPREL16_HA, and convert
insn on TPREL16_LO relocs to use r2 when addis would add zero.
gold/
* powerpc.cc (Target_powerpc::Relocate::relocate): Nop addis on
TPREL16_HA, and convert insn on TPREL16_LO and TPREL16_LO_DS
relocs to use r2/r13 when addis would add zero.
ld/
* testsuite/ld-powerpc/tls.s: Add calls with tls markers.
* testsuite/ld-powerpc/tls32.s: Likewise.
* testsuite/ld-powerpc/powerpc.exp: Run tls marker tests.
* testsuite/ld-powerpc/tls.d: Adjust for TPREL16_HA/LO optimization.
* testsuite/ld-powerpc/tlsexe.d: Likewise.
* testsuite/ld-powerpc/tlsexetoc.d: Likewise.
* testsuite/ld-powerpc/tlsld.d: Likewise.
* testsuite/ld-powerpc/tlsmark.d: Likewise.
* testsuite/ld-powerpc/tlsopt4.d: Likewise.
* testsuite/ld-powerpc/tlstoc.d: Likewise.
There isn't a good reason for ld.bfd to behave differently from gold
in the code generated by TLS GD/LD to LE optimization.
bfd/
* elf64-ppc.c (ppc64_elf_relocate_section): When optimizing
__tls_get_addr call sequences to LE, don't move the addi down
to the nop. Replace the bl with addi and leave the nop alone.
ld/
* testsuite/ld-powerpc/tls.d: Update.
* testsuite/ld-powerpc/tlsexe.d: Update.
* testsuite/ld-powerpc/tlsexetoc.d: Update.
* testsuite/ld-powerpc/tlsld.d: Update.
* testsuite/ld-powerpc/tlsmark.d: Update.
* testsuite/ld-powerpc/tlsopt4.d: Update.
* testsuite/ld-powerpc/tlstoc.d: Update.
We shpouldn't generate copy relocation to resolve reference to protected
data symbol defined in shared object with the NO_COPY_ON_PROTECTED
property. This patch adds a bit to elf_obj_tdata as well as
elf_i386_link_hash_entry and elf_x86_64_link_hash_entry to track the bfd
with the NO_COPY_ON_PROTECTED property as well as protected symbol
defined in shared object. extern_protected_data is set to FALSE if any
input relocatable file contains the NO_COPY_ON_PROTECTED property.
bfd/
PR ld/21997
* elf-bfd.h (elf_obj_tdata): Use ENUM_BITFIELD on object_id,
dyn_lib_class and has_gnu_symbols. Change bad_symtab to bitfield.
Add a has_no_copy_on_protected bitfield.
(elf_has_no_copy_on_protected): New.
* elf-properties.c (_bfd_elf_parse_gnu_properties): Set
elf_has_no_copy_on_protected for GNU_PROPERTY_NO_COPY_ON_PROTECTED.
(elf_merge_gnu_property_list): Likewise.
(_bfd_elf_link_setup_gnu_properties): Set extern_protected_data
to FALSE for elf_has_no_copy_on_protected.
* elf32-i386.c (SYMBOL_NO_COPYRELOC): New.
(elf_i386_link_hash_entry): Add def_protected.
(elf_i386_adjust_dynamic_symbol): Also check SYMBOL_NO_COPYRELOC
when checking info->nocopyreloc.
(elf_i386_link_setup_gnu_properties): Don't set
extern_protected_data here.
(elf_i386_merge_symbol_attribute): New function.
(elf_backend_merge_symbol_attribute): New.
* elf64-x86-64.c (SYMBOL_NO_COPYRELOC): New.
(elf_x86_64_link_hash_entry): Add def_protected.
(elf_x86_64_need_pic): Report protected symbol for def_protected.
(elf_x86_64_adjust_dynamic_symbol): Also check SYMBOL_NO_COPYRELOC
when checking info->nocopyreloc.
(elf_x86_64_relocate_section): Also check for R_X86_64_PC32
relocation run-time overflow and unresolvable R_X86_64_32S
relocation against protected data symbol defined in shared object
with GNU_PROPERTY_NO_COPY_ON_PROTECTED.
(elf_x86_64_link_setup_gnu_properties): Don't set
extern_protected_data here.
(elf_x86_64_merge_symbol_attribute): New function.
(elf_backend_merge_symbol_attribute): New.
ld/
PR ld/21997
* testsuite/ld-i386/i386.exp: Run PR ld/21997 tests.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-i386/pr21997-1a.S: New file.
* testsuite/ld-i386/pr21997-1b.c: Likewise.
* testsuite/ld-i386/pr21997-1c.S: Likewise.
* testsuite/ld-x86-64/pr21997-1a.S: Likewise.
* testsuite/ld-x86-64/pr21997-1a.err: Likewise.
* testsuite/ld-x86-64/pr21997-1b.c: Likewise.
* testsuite/ld-x86-64/pr21997-1b.err: Likewise.
* testsuite/ld-x86-64/pr21997-1c.c: Likewise.
Replace regexp with string match to workaround dejagnu 1.4.4 which
complains:
ERROR: bad switch "-fPIE": must be -all, -about, -indices, -inline, -expanded, -line, -linestop, -lineanchor, -nocase, -start, or --
* testsuite/ld-i386/i386.exp (undefined_weak): Replace regexp
with string match.
* testsuite/ld-x86-64/x86-64.exp (undefined_weak): Likewise.
Run pr22001-1b on x32 since R_X86_64_32S relocation can be turned into
dynamic R_X86_64_32 relocation which won't overflow on x32.
* testsuite/ld-x86-64/x86-64.exp: Run pr22001-1b on x32.
On x86-64, when -z nocopyreloc is used to build executable, relocations
may overflow at run-time or may not be resolved without PIC. This patch
checks these conditions and issues an error with suggestion for -fPIC.
bfd/
PR ld/22001
* elf64-x86-64.c (elf_x86_64_relocate_section): Check for
R_X86_64_PC32 relocation run-time overflow and unresolvable
R_X86_64_32S relocation with -z nocopyreloc.
ld/
PR ld/22001
* testsuite/ld-i386/i386.exp: Run -z nocopyreloc tests.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* ld/testsuite/ld-i386/pr22001-1a.c: New file.
* ld/testsuite/ld-i386/pr22001-1b.c: Likewise.
* ld/testsuite/ld-i386/pr22001-1c.S: Likewise.
* ld/testsuite/ld-x86-64/pr22001-1a.c: Likewise.
* ld/testsuite/ld-x86-64/pr22001-1a.err: Likewise.
* ld/testsuite/ld-x86-64/pr22001-1b.c: Likewise.
* ld/testsuite/ld-x86-64/pr22001-1b.err: Likewise.
* ld/testsuite/ld-x86-64/pr22001-1c.c: Likewise.
When processing an orphan section we first call lang_place_orphans, this
function handles a few sections for which the behaviour is known COMMON
sections, or sections marked as SEC_EXCLUDE.
Any orphans that are not handled in lang_place_orphans are passed on to
ldlang_place_orphan, this is where we decide where to put the orphan,
and then call lang_add_section to perform the actual orphan placement.
We previously had a larger set of checks at the start of the function
lang_add_section to discard some sections that we _knew_ should not be
added into the output file, this was where .group sections (in a final
link) and .debug* sections (with --strip-debug) were dropped.
The problem with dropping these sections at the lang_add_section stage
is that a user might also be using --orphan-handling=error to prevent
orphans. If they are then they should not be get errors about sections
that we know will be discarded, and which are not mentioned in the
linker script.
The solution proposed in this patch is to move the "will this section be
discarded" check into a separate function, and use this in
lang_place_orphans to have the early discard phase discard sections that
we know should not be included in the output file.
ld/ChangeLog:
PR 21961
* ldlang.c (lang_discard_section_p): New function.
(lang_add_section): Checks moved out into new function, which is
now called.
(lang_place_orphans): Call lang_discard_section_p instead of
duplicating some of the checks from lang_add_section.
* testsuite/ld-elf/orphan-11.d: New file.
* testsuite/ld-elf/orphan-11.ld: New file.
* testsuite/ld-elf/orphan-11.s: New file.
* testsuite/ld-elf/orphan-12.d: New file.
* testsuite/ld-elf/orphan-12.s: New file.
git commit 46434633f9 said
Make undefined symbols in allocate_dynrelocs dynamic
..if they have dynamic relocs. An undefined symbol in a PIC object
that finds no definition ought to become dynamic in order to support
--allow-shlib-undefined, but there is nothing in the generic ELF
linker code to do this if the reference isn't via the GOT or PLT. (An
initialized function pointer is an example.) So it falls to backend
code to ensure the symbol is made dynamic.
The above isn't true. Undefined symbols are indeed made dynamic for
shared libraries. Undefined symbols are not automatically made
dynamic in executables, and it was the PIE case that triggered an
internal consistency assertion on powerpc64. I guess I could have
jumped the other way when fixing PR21988, and not created a dynamic
reloc. Either way, it doesn't matter a great deal. We're going to
get an error on strong undefined symbols in an executable anyway, and
broken binaries if you try to use --unresolved-symbols=ignore-all to
disable the error.
* testsuite/ld-undefined/fundef.s: New test.
* testsuite/ld-undefined/undefined.exp: Test that undefined
symbols in shared libraries are made dynamic.
Add '\' before -- to workaround dejagnu 1.4.4 which complains:
ERROR: bad switch "--no-define-common may not be used without -shared":...
* testsuite/ld-elf/pr21903c.d: Add '\' before --.
* testsuite/ld-elf/pr21903d.d: Likewise.
* testsuite/ld-elf/pr21903e.d: Likewise.
-fPIC may be needed to compile PIE or PDE objects, not just shared
object.
bfd/
* elf64-x86-64.c (elf_x86_64_need_pic): Add an argument for
bfd_link_info. Report shared, PIE or PDE object based on
bfd_link_info.
(elf_x86_64_check_relocs): Update elf_x86_64_need_pic call.
(elf_x86_64_relocate_section): Likewise.
ld/
* testsuite/ld-x86-64/pie2.d: Updated.
* testsuite/ld-x86-64/pr19719.d: Likewise.
* testsuite/ld-x86-64/pr19807-2a.d: Likewise.
* testsuite/ld-x86-64/pr19969.d: Likewise.
When GNU_PROPERTY_NO_COPY_ON_PROTECTED is set, it indicates that there
are no copy relocations against protected data symbols. When linker
sees GNU_PROPERTY_NO_COPY_ON_PROTECTED on any input relocatable file,
it sets extern_protected_data to FALSE.
bfd/
* elf32-i386.c (elf_i386_link_setup_gnu_properties): Set
extern_protected_data to FALSE if GNU_PROPERTY_NO_COPY_ON_PROTECTED
is set on any input relocatable file.
* elf64-x86-64.c (elf_x86_64_link_setup_gnu_properties): Likewise.
ld/
* testsuite/ld-i386/i386.exp: Run protected7.
* testsuite/ld-i386/protected7.d: New file.
* testsuite/ld-i386/protected7.s: Likewise.
* testsuite/ld-x86-64/protected8.d: Likewise.
* testsuite/ld-x86-64/protected8.s: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run protected8.
Until all .eh_frame sections have been edited we don't know their
sizes. So it isn't possible to properly decide whether a non-empty
.eh_frame section follows a given section until editing is complete.
bfd/
PR 21441
* elf-eh-frame.c (_bfd_elf_discard_section_eh_frame): Don't add
alignment padding here.
* elflink.c (bfd_elf_discard_info): Add .eh_frame padding here
in a reverse pass over sections.
ld/
PR 21441
* testsuite/ld-x86-64/pr21038a.d: Adjust.
* testsuite/ld-x86-64/pr21038a-now.d: Adjust.
OUTPUT_FORMAT in linker script of PR ld/21884 tests is needed to trigger
PR ld/21884. Restore linker scripts and add nacl versions of the same
tests.
* testsuite/ld-i386/i386.exp: Run pr21884-nacl.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-i386/pr21884.d: Don't run on nacl targets.
* testsuite/ld-x86-64/pr21884.d: Likewise.
* testsuite/ld-i386/pr21884.t: Revert the last change.
* testsuite/ld-x86-64/pr21884.t: Likewise.
* testsuite/ld-i386/pr21884-nacl.d: New file.
* testsuite/ld-i386/pr21884-nacl.t: Likewise.
* testsuite/ld-x86-64/pr21884-nacl.d: Likewise.
* testsuite/ld-x86-64/pr21884-nacl.t: Likewise.
OUTPUT_FORMAT in the script results in "./ld-new: target elf32-i386
not found" and similarly for the x86_64 test.
* testsuite/ld-i386/pr21884.t: Remove unneeded format, arch and entry.
* testsuite/ld-x86-64/pr21884.t: Likewise.
* emultempl/elf32.em (handle_option): Accept the -z globalaudit
command line option.
* lexsup.c (elf_static_list_options): Add -z globalaudit.
* ld.texinfo: Document the support for the new command line
option.
* NEWS: Mention the new feature.
* testsuite/ld-elf/audit.exp: Add a test of the -z globalaudit
command line option.
* testsuite/ld-elf/globalaudit.rd: New file: Expected output from
readelf.
* scripttempl/pep.sc: Enclose __CTOR_LIST__, ___CTOR_LIST__,
__DTOR_LIST__ and ___DTOR_LIST__ in PROVIDE statements so that
they can be overrridden by crt input files.
* scripttempl/pe.sc: Likewise.
When --enable-shared is used, ./ld-new may be a shell script and the
real linker is .libs/ld-new. We should check .libs/ld-new first.
* testsuite/config/default.exp (LD_CLASS): Check .libs/ld-new
for linker first.
PR ld/17618 test requires 64-bit linker to run. Set LD_CLASS to "64bit"
for 64-bit ELF linker and run PR ld/17618 test only if $LD_CLASS is
"64bit". More checks can be added to support 64-bit linkers in non-ELF
format.
* testsuite/config/default.exp (LD_CLASS): New. Set to "64bit"
for 64-bit ELF linker.
* testsuite/ld-x86-64/pr17618.d (#notarget): Removed.
* testsuite/ld-x86-64/x86-64.exp: Run pr17618 only for 64-bit
linker.
Require GCC 5 or above for 3 x86 tests which fail with GCC 4.9.3.
PR ld/21924
* testsuite/ld-i386/i386.exp: Require GCC 5 or above for
"weakundef1 with PIE" test.
* testsuite/ld-x86-64/tls.exp: Require GCC 5 or above for
"tlsdesc1" and "tlsdesc1 with PIE" tests.
