gas/testsuite/
PR binutils/13571
* gas/i386/i386.exp: Run i386-intel and x86_64-intel.
* gas/i386/i386-intel.d: New file.
* gas/i386/x86_64-intel.d: Likewise.
opcodes/
PR binutils/13571
* i386-dis.c (MOD_0FC3): New.
(PREFIX_0FC3): Renamed to ...
(PREFIX_MOD_0_0FC3): This.
(dis386_twobyte): Replace PREFIX_0FC3 with MOD_0FC3.
(prefix_table): Replace Ma with Ev on movntiS.
(mod_table): Add MOD_0FC3.
opcodes * arm-dis.c (print_insn_coprocessor): Added support for quarter
float bitfield format.
(coprocessor_opcodes): Changed VFP vmov reg,immediate to use new
quarter float bitfield format.
tests * gas/arm/vfpv3-const-conv.d: Update expected result due to change
of comment for vmov reg,immediate with VFP coprocessor.
Back in the day support for these processors was added, we probably
didn't want to waste PPC_OPCODE bits on minor variations. I've had a
complaint that disassembly of mfspr/mtspr was wrong for power8. This
patch fixes that problem.
Note that since -m860/-m850/-m821 are new gas options enabling the
mpc8xx specific mfspr/mtspr variants it is possible that this change
will break some mpc8xx assembly code. ie. you might need to modify
makefiles to pass -m860 to gas.
include/opcode/
* ppc.h (PPC_OPCODE_750, PPC_OPCODE_7450, PPC_OPCODE_860): Define.
opcodes/
* ppc-opc.c (PPC750, PPC7450, PPC860): Define using PPC_OPCODE_*.
* ppc-dis.c (ppc_opts): Add 821, 850 and 860 entries. Add
PPC_OPCODE_7450 to 7450 entry. Add PPC_OPCODE_750 to 750cl entry.
gas/
* config/tc-ppc.c (md_show_usage): Add -m821, -m850, -m860.
* doc/c-ppc.texi (PowerPC-Opts): Likewise.
gas/testsuite/
* gas/ppc/titan.d: Correct mfmcsrr0 disassembly.
ISA 2.07 added a new category called Elemental Memory Barriers that modifies
the sync instruction to accept an additional operand ESYNC. Edmar added
support for this insruction varient here:
https://sourceware.org/ml/binutils/2012-02/msg00221.html
Looking at this closer, I see that the insert_ls() function is misnamed
(since it's attached to the ESYNC operand, not the LS operand) but more
importantly, it is silently modifying the LS operand value behind the
users back when the LS operand is either invalid or is incompatible with
the new ESYNC operand. The ISA 2.07 doc has an Assembler Note that clearly
states that assemblers that support the ESYNC operand should report all
invalid uses of LS and ESYNC. This patch changes the assembler to
error out on invalid and incompatible operand usage.
opcodes/
* ppc-opc.c (insert_ls): Test for invalid LS operands.
(insert_esync): New function.
(LS, WC): Use insert_ls.
(ESYNC): Use insert_esync.
gas/testsuite/
* gas/ppc/e6500.s <sync>: Fix invalid test.
* gas/ppc/e6500.d: Likewise.
include * dis-asm.h (struct disassemble_info): Add stop_vma field.
binuti * objdump.c (disassemble_bytes): Set the stop_vma field in the
disassemble_info structure when disassembling code sections with
-d.
* doc/binutils.texi (objdump): Document the discrepancy between -d
and -D.
opcodes * dis-buf.c (buffer_read_memory): Fail is stop_vma is set and the
requested region lies beyond it.
* bfin-dis.c (print_insn_bfin): Ignore sysop instructions when
looking for 32-bit insns.
* mcore-dis.c (print_insn_mcore): Disable stop_vma when reading
data.
* sh-dis.c (print_insn_sh): Likewise.
* tic6x-dis.c (print_insn_tic6x): Disable stop_vma when reading
blocks of instructions.
* vax-dis.c (print_insn_vax): Check that the requested address
does not clash with the stop_vma.
tests * gas/arm/backslash-at.s: Add extra .byte directives so that the
foo symbol does not appear to point half way through an
instruction.
* gas/arm/backslash-at.d: Update expected disassembly.
* gas/i386/ilp32/x86-64-opcode-inval-intel.d: Likewise.
* gas/i386/ilp32/x86-64-opcode-inval.d: Likewise.
* gas/i386/x86-64-opcode-inval-intel.d: Likewise.
* gas/i386/x86-64-opcode-inval.d: Likewise.
ISA 2.07 (ie, POWER8) added the rfebb instruction which takes one operand
with the value of either a 0 or 1. It also defines an extended mnemonic
with no operands (ie, "rfebb") that is supposed to be equivalent to "rfebb 1".
I implemented rfebb's lone operand with PPC_OPERAND_OPTIONAL, but the
problem is, optional operands that are ommitted always default to the
value 0, which is wrong in this case. I have added support for allowing
non-zero default values by adding an additional flag PPC_OPERAND_OPTIONAL_VALUE
that specifies that the default operand value to be used is stored in the
SHIFT field of the operand field immediately following this one.
This fixes the rfebb issue. I also fixed the mftb and mfcr instructions
so they use the same mechanism. This allows us to flag invalid uses of
mfcr where we explicitly pass in a zero FXM value, like the use in a2.[sd].
include/opcode/
* ppc.h (PPC_OPERAND_OPTIONAL_VALUE): New.
(ppc_optional_operand_value): New inline function.
opcodes/
* ppc-dis.h (skip_optional_operands): Use ppc_optional_operand_value.
* ppc-opc.c (FXM4): Add non-zero optional value.
(TBR): Likewise.
(SXL): Likewise.
(insert_fxm): Handle new default operand value.
(extract_fxm): Likewise.
(insert_tbr): Likewise.
(extract_tbr): Likewise.
gas/
* config/tc-ppc.c (md_assemble): Use ppc_optional_operand_value.
Allow for optional operands without insert functions.
gas/testsuite/
* gas/ppc/power8.d: Fixup rfebb test results.
* gas/ppc/a2.s: Fix invalid mfcr test.
* gas/ppc/a2.d: Likewise.
In the commit that added PowerPC Pair Singles, Ben accidentally removed
a comment and re-added an unused MTMSRD_L macro Alan had recently deleted.
This was probably just an oversite when he was refreshing his patch to
trunk.
opcodes/
* ppc-opc.c: Add comment accidentally removed by old commit.
(MTMSRD_L): Delete.
The ARMv8.1 architecture introduced the Privileged Access Never extension. This
adds a processor state field PSTATE.PAN which can be accessed using the MRS/MSR
instructions.
This patch adds support for the PAN architecture feature and processor state
field to libopcode.
include/opcode
2015-06-01 Matthew Wahab <matthew.wahab@arm.com>
* aarch64.h (AARCH64_FEATURE_PAN): New.
(aarch64_sys_reg_supported_p): Declare.
(aarch64_pstatefield_supported_p): Declare.
opcodes/
2015-06-01 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-opc.c (F_ARCHEXT): New.
(aarch64_sys_regs): Add "pan".
(aarch64_sys_reg_supported_p): New.
(aarch64_pstatefields): Add "pan".
(aarch64_pstatefield_supported_p): New.
As pointed out before, the documentation mandates the rounding mode to
follow the GPR, so disassembler should produce output accordingly.
gas/testsuite/
2015-06-01 Jan Beulich <jbeulich@suse.com>
* gas/i386/avx512f.s: Adjust operand order for Intel syntax
vcvt{,u}si2ss.
* gas/i386/x86-64-avx512f.s: Adjust operand order for Intel
syntax vcvt{,u}si2s{d,s}.
opcodes/
2015-06-01 Jan Beulich <jbeulich@suse.com>
* i386-dis.c (print_insn): Swap rounding mode specifier and
general purpose register in Intel mode.
As pointed out before, the documentation mandates the rounding mode to
follow the GPR, so gas should accept such input. As the brojen code got
released already we sadly will need to continue to also accept the
badly ordered operands.
gas/testsuite/
2015-06-01 Jan Beulich <jbeulich@suse.com>
* gas/i386/avx512f-intel.d: Adjust expectations on operand order.
* gas/i386/evex-lig256-intel.d: Likewise.
* gas/i386/evex-lig512-intel.d: Likewise.
* gas/i386/x86-64-avx512f-intel.d: Likewise.
* gas/i386/x86-64-evex-lig256-intel.d: Likewise.
* gas/i386/x86-64-evex-lig512-intel.d: Likewise.
opcodes/
2015-06-01 Jan Beulich <jbeulich@suse.com>
* i386-opc.tbl: New IntelSyntax entries for vcvt{,u}si2s{d,s}.
* i386-tbl.h: Regenerate.
AMD64 spec and Intel64 spec differ in direct unconditional branches in
64-bit mode. AMD64 supports direct unconditional branches with 16-bit
offset via the data size prefix, which truncates RIP to 16 bits, while
the data size prefix is ignored by Intel64.
This patch adds -mamd64/-mintel64 option to x86-64 assembler and
-Mamd64/-Mintel64 option to x86-64 disassembler. The most permissive
ISA, which is AMD64, is the default.
GDB can add an option, similar to
(gdb) help set disassembly-flavor
Set the disassembly flavor.
The valid values are "att" and "intel", and the default value is "att".
to select which ISA to disassemble.
binutils/
PR binutis/18386
* doc/binutils.texi: Document -Mamd64 and -Mintel64.
gas/
PR binutis/18386
* config/tc-i386.c (OPTION_MAMD64): New.
(OPTION_MINTEL64): Likewise.
(md_longopts): Add -mamd64 and -mintel64.
(md_parse_option): Handle OPTION_MAMD64 and OPTION_MINTEL64.
(md_show_usage): Add -mamd64 and -mintel64.
* doc/c-i386.texi: Document -mamd64 and -mintel64.
gas/testsuite/
PR binutis/18386
* gas/i386/i386.exp: Run x86-64-branch-2 and x86-64-branch-3.
* gas/i386/x86-64-branch.d: Also pass -Mintel64 to objdump.
* gas/i386/ilp32/x86-64-branch.d: Likewise.
* gas/i386/x86-64-branch-2.d: New file.
* gas/i386/x86-64-branch-2.s: Likewise.
* gas/i386/x86-64-branch-3.l: Likewise.
* gas/i386/x86-64-branch-3.s: Likewise.
ld/testsuite/
PR binutis/18386
* ld-x86-64/tlsgdesc.dd: Also pass -Mintel64 to objdump.
* ld-x86-64/tlspic.dd: Likewise.
* ld-x86-64/x86-64.exp (x86_64tests): Also pass -Mintel64 to
objdump for tlspic.dd and tlsgdesc.dd.
opcodes/
PR binutis/18386
* i386-dis.c: Add comments for '@'.
(x86_64_table): Use '@' on call/jmp for X86_64_E8/X86_64_E9.
(enum x86_64_isa): New.
(isa64): Likewise.
(print_i386_disassembler_options): Add amd64 and intel64.
(print_insn): Handle amd64 and intel64.
(putop): Handle '@'.
(OP_J): Don't ignore the operand size prefix for AMD64 in 64-bit.
* i386-gen.c (cpu_flags): Add CpuAMD64 and CpuIntel64.
* i386-opc.h (AMD64): New.
(CpuIntel64): Likewise.
(i386_cpu_flags): Add cpuamd64 and cpuintel64.
* i386-opc.tbl: Add direct call/jmp with Disp16|Disp32 for AMD64.
Mark direct call/jmp without Disp16|Disp32 as Intel64.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
Remove the wait instructions for server processors, since they were never
implemented. Also add the extra operands added to the tlbie and slbia
instructions with ISA 2.06 and ISA 2.05 respectively.
binutils/
* MAINTAINERS: Add myself as PPC maintainer.
opcodes/
* ppc-opc.c (IH) New define.
(powerpc_opcodes) <wait>: Do not enable for POWER7.
<tlbie>: Add RS operand for POWER7.
<slbia>: Add IH operand for POWER6.
gas/testsuite/
* gas/ppc/power4.d: Add a slbia test.
* gas/ppc/power4.s: Likewise.
* gas/ppc/power6.d: Add slbia and tlbie tests.
* gas/ppc/power6.s: Likewise.
* gas/ppc/power7.d: Remove wait tests. Add a tlbie test.
* gas/ppc/power7.s: Likewise.
Disp16 and Disp32 aren't supported by direct branches in 64-bit mode.
This patch removes them from 64-bit direct branches.
* opcodes/i386-opc.tbl (call): Remove Disp16|Disp32 from 64-bit
direct branch.
(jmp): Likewise.
* i386-tbl.h: Regenerated.
* ppc-opc.c (DCBT_EO): New define.
(powerpc_opcodes) <lbarx>: Enable for POWER8 and later.
<lharx>: Likewise.
<stbcx.>: Likewise.
<sthcx.>: Likewise.
<waitrsv>: Do not enable for POWER7 and later.
<waitimpl>: Likewise.
<dcbt>: Default to the two operand form of the instruction for all
"old" cpus. For "new" cpus, use the operand ordering that matches
whether the cpu is server or embedded.
<dcbtst>: Likewise.
gas/testsuite/
* gas/ppc/a2.s: Fixup test case due to dcbt/dcbtst embedded operand
ordering change.
* gas/ppc/a2.d: Likewise.
* gas/ppc/476.d: Likewise.
* gas/ppc/booke.s: Remove invalid 3 operand dcbt tests.
* gas/ppc/booke.d: Likewise.
* gas/ppc/power7.s: Remove lbarx, lharx, stbcx., sthcx., waitrsv
and waitimpl tests.
* gas/ppc/power7.d: Likewise.
Certain conversion operations as well as vfpclassp{d,s} are ambiguous
when the input operand is in memory and no broadcast is being used.
While in Intel mode this gets resolved by printing suitable operand
size modifiers, AT&T mode need mnemonic suffixes to be added.
gas/testsuite/
2015-04-23 Jan Beulich <jbeulich@suse.com>
* gas/i386/avx512dq.d: Add 'z' suffix to vfpclassp{d,s} non-
register, non-broadcast cases.
* gas/i386/x86-64-avx512dq.d: Likewise.
* gas/i386/avx512dq_vl.d: Add 'x' and 'y' suffixes to
vcvt{,u}qq2ps and vfpclassp{d,s} non-register, non-broadcast
cases.
* gas/i386/x86-64-avx512dq_vl.d: Likewise.
* gas/i386/avx512f_vl.d: Add 'x' and 'y' suffixes to
vcvt{,t}pd2{,u}dq and vcvtpd2ps non-register, non-broadcast
cases.
* gas/i386/x86-64-avx512f_vl.d: Likewise.
opcodes/
2015-04-23 Jan Beulich <jbeulich@suse.com>
* i386-dis.c (putop): Extend "XY" handling to AVX512. Handle "XZ".
* i386-dis-evex.h.c (vcvtpd2ps, vcvtqq2ps, vcvttpd2udq,
vcvtpd2udq, vcvtuqq2ps, vcvttpd2dq, vcvtpd2dq): Add %XY.
(vfpclasspd, vfpclassps): Add %XZ.
This patch puts rdrand and rdseed in prefix_table so that invalid
prefixes for rdrand and rdseed are handled properly.
gas/testsuite/
PR binutils/17898
* gas/i386/prefix.s: Add rdrand/rdseed prefix tests.
* gas/i386/prefix.d: Updated.
opcodes/
PR binutils/17898
* i386-dis.c (PREFIX_0FC7_REG_6): Renamed to ...
(PREFIX_MOD_0_0FC7_REG_6): This.
(PREFIX_MOD_3_0FC7_REG_6): New.
(PREFIX_MOD_3_0FC7_REG_7): Likewise.
(prefix_table): Replace PREFIX_0FC7_REG_6 with
PREFIX_MOD_0_0FC7_REG_6. Add PREFIX_MOD_3_0FC7_REG_6 and
PREFIX_MOD_3_0FC7_REG_7.
(mod_table): Replace PREFIX_0FC7_REG_6 with
PREFIX_MOD_0_0FC7_REG_6. Use PREFIX_MOD_3_0FC7_REG_6 and
PREFIX_MOD_3_0FC7_REG_7.
2015-04-15 Renlin Li <renlin.li@arm.com>
opcodes/:
* arm-dis.c (thumb32_opcodes): Define 'D' format control code,
use it for ssat and ssat16.
(print_insn_thumb32): Add handle case for 'D' control code.
gas/testsuite/:
* gas/arm/arch7em.d: Adjust required ssat and ssat16 immediate field.
* gas/arm/thumb32.d: Likewise.
The gdb TUI is calling gdb_print_insn() (which calls
disassemble_init_powerpc()) enough to show up high in profiles. As
suggested by Alan, only initialise if the indices are empty.
opcodes/ChangeLog:
2015-03-25 Anton Blanchard <anton@samba.org>
* ppc-dis.c (disassemble_init_powerpc): Only initialise
powerpc_opcd_indices and vle_opcd_indices once.
opcodes/
* mips-opc.c (decode_mips_operand): Fix constraint issues
with u and y operands.
gas/testsuite/
* gas/mips/mips.exp: Added branch constraints testcase.
* gas/mips/r6-branch-constraints.s: New test.
* gas/mips/r6-branch-constraints.l: New test.
2015-03-03 Jiong Wang <jiong.wang@arm.com>
opcode/
* arm-dis.c (arm_symbol_is_valid): Skip ARM private symbols.
binutils/testsuite/
* binutils-all/arm/rvct_symbol.s: New testcase.
* binutils-all/arm/objdump.exp: Run it.
These are sufficient to link an --enable-targets=all GDB build in C++
mode, on x86_64 Fedora 20.
include/opcode/
2015-02-19 Pedro Alves <palves@redhat.com>
* cgen.h [__cplusplus]: Wrap in extern "C".
* msp430-decode.h [__cplusplus]: Likewise.
* nios2.h [__cplusplus]: Likewise.
* rl78.h [__cplusplus]: Likewise.
* rx.h [__cplusplus]: Likewise.
* tilegx.h [__cplusplus]: Likewise.
opcodes/
2015-02-19 Pedro Alves <palves@redhat.com>
* microblaze-dis.h [__cplusplus]: Wrap in extern "C".
Building GDB as a C++ program, we see:
In file included from gdb/microblaze-tdep.c:37:0:
gdb/../opcodes/../opcodes/microblaze-opcm.h: At global scope:
gdb/../opcodes/../opcodes/microblaze-opcm.h:32:51: error: expected identifier before ‘or’ token
ncget, ncput, muli, bslli, bsrai, bsrli, mului, or, and, xor,
^
gdb/../opcodes/../opcodes/microblaze-opcm.h:32:51: error: expected ‘}’ before ‘or’ token
gdb/../opcodes/../opcodes/microblaze-opcm.h:32:51: error: expected unqualified-id before ‘or’ token
gdb/../opcodes/../opcodes/microblaze-opcm.h:60:1: error: expected declaration before ‘}’ token
};
^
opcodes/ChangeLog:
2015-02-10 Pedro Alves <palves@redhat.com>
Tom Tromey <tromey@redhat.com>
* microblaze-opcm.h (or, and, xor): Rename to microblaze_or,
microblaze_and, microblaze_xor.
* microblaze-opc.h (opcodes): Adjust.
- 32 128 bit vector registers (overlapping with the existing 16 64 bit
floating point registers)
- vector double instructions
- vector integer instructions
- scalar vector instructions (allowing to have more floating point
registers for scalar operations)
- vector string instructions
gas/ChangeLog:
* config/tc-s390.c (struct pd_reg): Remove.
(pre_defined_registers): Remove.
(REG_NAME_CNT): Remove.
(reg_name_search): Calculate the register number instead of doing
a lookup.
(register_name, tc_s390_regname_to_dw2regnum): Adopt to the new
reg_name_search signature.
(s390_parse_cpu): Support the new arch string z13.
(s390_insert_operand): Support for vector registers with the extra
field for the fifth bit of each vector register operand.
(md_gather_operand): Adjust to the new handling of optional
parameters.
* doc/as.texinfo: Document the z13 cpu string.
gas/testsuite/ChangeLog:
* gas/s390/esa-g5.d: Add a variant without the optional operand.
* gas/s390/esa-g5.s: Likewise.
* gas/s390/esa-z9-109.d: Likewise.
* gas/s390/esa-z9-109.s: Likewise.
* gas/s390/zarch-z9-109.d: Likewise.
* gas/s390/zarch-z9-109.s: Likewise.
* gas/s390/zarch-z10.d: For variants with a zero optional argument
it is not dumped by objdump anymore.
* gas/s390/zarch-zEC12.d: Likewise.
* gas/s390/zarch-z13.d: New file.
* gas/s390/zarch-z13.s: New file.
* gas/s390/s390.exp: Run the test for the z13 files.
include/opcode/ChangeLog:
* s390.h (s390_opcode_cpu_val): Add S390_OPCODE_Z13.
ld/testsuite/ChangeLog:
* ld-s390/tlsbin.dd: The nopr register operand is optional and not
printed if 0 anymore.
opcodes/ChangeLog:
* s390-dis.c (s390_extract_operand): Support vector register
operands.
(s390_print_insn_with_opcode): Support new operands types and add
new handling of optional operands.
* s390-mkopc.c (s390_opcode_mode_val, s390_opcode_cpu_val): Remove
and include opcode/s390.h instead.
(struct op_struct): New field `flags'.
(insertOpcode, insertExpandedMnemonic): New parameter `flags'.
(dumpTable): Dump flags.
(main): Parse flags from the s390-opc.txt file. Add z13 as cpu
string.
* s390-opc.c: Add new operands types, instruction formats, and
instruction masks.
(s390_opformats): Add new formats for .insn.
* s390-opc.txt: Add new instructions.
opcodes/
* mips-opc.c (mips_builtin_opcodes): Add JALRC alias for JIALC.
Remove the operand from NAL.
gas/testsuite/
* gas/mips/r6.s: Test JALRC and NAL
* gas/mips/r6-n32.d: Add expected output for JALRC and NAL.
* gas/mips/r6-n64.d: Likewise.
* gas/mips/r6.d: Likewise.
On further reading of ISA manual it appears gas should have been
treating mftb and mftbu as extended mnemonics for mfspr, for ISA 2.03
and later.
opcodes/
* ppc-opc.c (powerpc_opcodes): Make mftb* generate mfspr for
power4 and later.
gas/testsuite/
* gas/ppc/a2.d: Update for mftb change.
* gas/ppc/476.d: Likewise.
mftb is marked phased out in the architecture manual, but we can keep
it as an extended mnemonic for mftbl.
* ppc-opc.c (powerpc_opcodes <mftb>): Don't deprecate for power7.
(TB): Delete.
(insert_tbr, extract_tbr): Validate tbr number.
binutils:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* readelf.c (print_mips_isa_ext): Print the value of Octeon3.
gas:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* config/tc-mips.c (CPU_IS_OCTEON): Handle CPU_OCTEON3.
(mips_cpu_info_table): Octeon3 enables virt ase.
* doc/c-mips.texi: Document octeon3 as an acceptable value for
-march=.
gas/testsuite:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* gas/mips/mips.exp: Add support for Octeon3 architecture.
Also add in support for running Octeon3 tests.
* gas/mips/octeon3.d: New test.
* gas/mips/octeon3.s: New test source.
opcodes:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* mips-dis.c (mips_arch_choices): Add octeon3.
* mips-opc.c (IOCT): Include INSN_OCTEON3.
(IOCT2): Likewise.
(IOCT3): New define.
(IVIRT): New define.
(mips_builtin_opcodes): Add dmfgc0, dmtgc0, hypcall, mfgc0, mtgc0,
tlbinv, tlbinvf, tlbgr, tlbgwi, tlbginv, tlbginvf, tlbgwr, tlbgp, tlti
IVIRT instructions.
Extend mtm0, mtm1, mtm2, mtp0, mtp1, mtp2 instructions to take another
operand for IOCT3.
bfd:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* archures.c: Add octeon3 for mips target.
* bfd-in2.h: Regenerate.
* bfd/cpu-mips.c: Define I_mipsocteon3.
nfo_struct): Add octeon3 support.
* bfd/elfxx-mips.c: (_bfd_elf_mips_mach): Add support for
octeon3.
(mips_set_isa_flags): Add support for octeon3.
(bfd_mips_isa_ext): Add bfd_mach_mips_octeon3.
(mips_mach_extensions): Make bfd_mach_mips_octeon3 an
extension of bfd_mach_mips_octeon2.
(print_mips_isa_ext): Print the value of Octeon3.
This patch annotates the following SPARC instructions as VIS3B
instructions: ldx *, %efsr, fpadd64, fpsub64, fpcmpule8, fpcmpune8,
fpcmpugt8, fpcmpueq8. It also improves the documentation of the VIS3B
capability in several headers.
Tested in sparc64-unknown-linux-gnu and sparc-unknown-linux-gnu.
No visible regressions.
opcodes/ChangeLog:
2014-10-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* sparc-opc.c (sparc-opcodes): Annotate several instructions with
the HWCAP2_VIS3B hwcap.
include/opcodes/ChangeLog:
2014-10-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* sparc.h (HWCAP2_VIS3B): Documentation improved.
include/elf/ChangeLog:
2014-10-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* sparc.h (ELF_SPARC_HWCAP2_VIS3B): Documentation improved.
This patch fixes the hwcap entries in `sparc-opcodes' (which were
incorrectly located in the flags field) for the following
instructions:
wr r,r,%sys_tick
wr r,i,%sys_tick
wr r,r,%sys_tick_cmpr
wr r,i,%sys_tick_cmpr
edge8n edge8ln edge16n edge16ln edge32n edge32ln
bmask bshuffle siam
Tested in sparc-unknown-linux-gnu and sparc64-unknown-linux-gnu.
No visible regressions.
opcodes/ChangeLog:
2014-10-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* sparc-opc.c (sparc-opcodes): Fix several misplaced hwcap
entries.
First, add nds32 audio ISA extension including opcodes and registers.
Second, redesign the disassemble implement.
The original disassemble decode instruction opcode using switch-case.
It is hard to synchronize when adding new instructions.
Therefore, the new implement reuses nds32_opcodes to dump the instructions.
bfd/
* aoutx.h (NAME (aout, machine_type)): Add mips32r6 and mips64r6.
* archures.c (bfd_architecture): Likewise.
* bfd-in2.h (bfd_architecture): Likewise.
(bfd_reloc_code_real): Add relocs BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3 and
BFD_RELOC_MIPS_19_PCREL_S2.
* cpu-mips.c (arch_info_struct): Add mips32r6 and mips64r6.
* elf32-mips.c: Define relocs R_MIPS_PC21_S2, R_MIPS_PC26_S2
R_MIPS_PC18_S3, R_MIPS_PC19_S2, R_MIPS_PCHI16 and R_MIPS_PCLO16.
(mips_reloc_map): Add entries for BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
* elf64-mips.c: Define REL, and RELA relocations R_MIPS_PC21_S2,
R_MIPS_PC26_S2, R_MIPS_PC18_S3, R_MIPS_PC19_S2, R_MIPS_PCHI16
and R_MIPS_PCLO16.
(mips_reloc_map): Add entries for BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
* elfn32-mips.c: Likewise.
* elfxx-mips.c (MIPSR6_P): New define.
(mipsr6_exec_plt_entry): New array.
(hi16_reloc_p): Add support for R_MIPS_PCHI16.
(lo16_reloc_p): Add support for R_MIPS_PCLO16.
(aligned_pcrel_reloc_p): New function.
(mips_elf_relocation_needs_la25_stub): Add support for relocs:
R_MIPS_PC21_S2 and R_MIPS_PC26_S2.
(mips_elf_calculate_relocation): Add support for relocs:
R_MIPS_PC21_S2, R_MIPS_PC26_S2, R_MIPS_PC18_S3, R_MIPS_PC19_S2,
R_MIPS_PCHI16 and R_MIPS_PCLO16.
(_bfd_elf_mips_mach): Add support for mips32r6 and mips64r6.
(mips_elf_add_lo16_rel_addend): Add support for R_MIPS_PCHI16.
(_bfd_mips_elf_check_relocs): Add support for relocs:
R_MIPS_PC21_S2 and R_MIPS_PC26_S2.
(_bfd_mips_elf_relocate_section): Add a check for unaligned
pc relative relocs.
(_bfd_mips_elf_finish_dynamic_symbol): Add support for MIPS r6
plt entry.
(mips_set_isa_flags): Add support for mips32r6 and mips64r6.
(_bfd_mips_elf_print_private_bfd_data): Likewise.
(mips_32bit_flags_p): Add support for mips32r6.
* libbfd.h (bfd_reloc_code_real_names): Add entries for
BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2,
BFD_RELOC_MIPS_18_PCREL_S3 and BFD_RELOC_MIPS_19_PCREL_S2.
* reloc.c: Document relocs BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3 and
BFD_RELOC_MIPS_19_PCREL_S2.
binutils/
* readelf.c (get_machine_flags): Add support for mips32r6 and
mips64r6.
elfcpp/
* mips.h (E_MIPS_ARCH_32R6, E_MIPS_ARCH_64R6): New enum constants.
gas/
* config/tc-mips.c (mips_nan2008): New static global.
(mips_flag_nan2008): Removed.
(LL_SC_FMT): New define.
(COP12_FMT): Updated.
(ISA_IS_R6): New define.
(ISA_HAS_64BIT_REGS): Add mips64r6.
(ISA_HAS_DROR): Likewise.
(ISA_HAS_64BIT_FPRS): Add mips32r6 and mips64r6.
(ISA_HAS_ROR): Likewise.
(ISA_HAS_ODD_SINGLE_FPR): Likewise.
(ISA_HAS_MXHC1): Likewise.
(hilo_interlocks): Likewise.
(md_longopts): Likewise.
(ISA_HAS_LEGACY_NAN): New define.
(options): Add OPTION_MIPS32R6 and OPTION_MIPS64R6.
(mips_ase): Add field rem_rev.
(mips_ases): Updated to add which ISA an ASE was removed in.
(mips_isa_rev): Add support for mips32r6 and mips64r6.
(mips_check_isa_supports_ase): Add support to check if an ASE
has been removed in the specified MIPS ISA revision.
(validate_mips_insn): Skip '-' character.
(macro_build): Likewise.
(mips_check_options): Prevent R6 working with fp32, mips16,
micromips, or branch relaxation.
(file_mips_check_options): Set R6 floating point registers to
64 bit. Also deal with the nan2008 option.
(limited_pcrel_reloc_p): Add relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
(operand_reg_mask): Add support for OP_SAME_RS_RT, OP_CHECK_PREV
and OP_NON_ZERO_REG.
(match_check_prev_operand): New static function.
(match_same_rs_rt_operand): New static function.
(match_non_zero_reg_operand): New static function.
(match_operand): Added entries for: OP_SAME_RS_RT, OP_CHECK_PREV
and OP_NON_ZERO_REG.
(insns_between): Added case to deal with forbidden slots.
(append_insn): Added support for relocs: BFD_RELOC_MIPS_21_PCREL_S2
and BFD_RELOC_MIPS_26_PCREL_S2.
(match_insn): Add support for operands -A, -B, +' and +". Also
skip '-' character.
(mips_percent_op): Add entries for %pcrel_hi and %pcrel_lo.
(md_parse_option): Add support for mips32r6 and mips64r6. Also
update the nan option handling.
(md_pcrel_from): Add cases for relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2.
(mips_force_relocation): Prevent forced relaxation for MIPS r6.
(md_apply_fix): Add support for relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
(s_mipsset): Add support for mips32r6 and mips64r6.
(s_nan): Update to support the new nan2008 framework.
(tc_gen_reloc): Add relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
(mips_elf_final_processing): Updated to use the mips_nan2008.
(mips_cpu_info_table): Add entries for mips32r6 and mips64r6.
(macro): Enable ldc2, sdc2, ll, lld, swc2, sc, scd, cache, pref
macros for R6.
(mips_fix_adjustable): Make PC relative R6 relocations relative
to the symbol and not the section.
* configure.ac: Add support for mips32r6 and mips64r6.
* configure: Regenerate.
* doc/c-mips.texi: Document the -mips32r6 and -mips64r6 command line
options.
* doc/as.texinfo: Likewise.
gas/testsuite/
* gas/mips/24k-triple-stores-1.s: If testing for r6 prevent
non-supported instructions from being tested.
* gas/mips/24k-triple-stores-2.s: Likewise.
* gas/mips/24k-triple-stores-3.s: Likewise.
* gas/mips/24k-triple-stores-6.s: Likewise.
* gas/mips/beq.s: Likewise.
* gas/mips/eva.s: Likewise.
* gas/mips/ld-zero-3.s: Likewise.
* gas/mips/mips32-cp2.s: Likewise.
* gas/mips/mips32.s: Likewise.
* gas/mips/mips4.s: Likewise.
* gas/mips/add.s: Don't test the add instructions if r6, and
add padding.
* gas/mips/add.d: Check for a triple dot not a nop at the end of the
disassembly output.
* gas/mips/micromips@add.d: Likewise.
* gas/mips/mipsr6@24k-branch-delay-1.d: New file.
* gas/mips/mipsr6@24k-triple-stores-1.d: New file.
* gas/mips/mipsr6@24k-triple-stores-2-llsc.d: New file.
* gas/mips/mipsr6@24k-triple-stores-2.d: New file.
* gas/mips/mipsr6@24k-triple-stores-3.d: New file.
* gas/mips/mipsr6@24k-triple-stores-6.d: New file.
* gas/mips/mipsr6@add.d: New file.
* gas/mips/mipsr6@attr-gnu-4-1-msingle-float.l: New file.
* gas/mips/mipsr6@attr-gnu-4-1-msingle-float.s: New file.
* gas/mips/mipsr6@attr-gnu-4-1-msoft-float.l: New file.
* gas/mips/mipsr6@attr-gnu-4-1-msoft-float.s: New file.
* gas/mips/mipsr6@attr-gnu-4-2-mdouble-float.l: New file.
* gas/mips/mipsr6@attr-gnu-4-2-mdouble-float.s: New file.
* gas/mips/mipsr6@beq.d: New file.
* gas/mips/mipsr6@bge.d: New file.
* gas/mips/mipsr6@bgeu.d: New file.
* gas/mips/mipsr6@blt.d: New file.
* gas/mips/mipsr6@bltu.d: New file.
* gas/mips/mipsr6@branch-misc-1.d: New file.
* gas/mips/mipsr6@branch-misc-2-64.d: New file.
* gas/mips/mipsr6@branch-misc-2pic-64.d: New file.
* gas/mips/mipsr6@branch-misc-4-64.d: New file.
* gas/mips/mipsr6@cache.d: New file.
* gas/mips/mipsr6@eva.d: New file.
* gas/mips/mipsr6@jal-svr4pic-noreorder.d: New file.
* gas/mips/mipsr6@jal-svr4pic.d: New file.
* gas/mips/mipsr6@ld-zero-2.d: New file.
* gas/mips/mipsr6@ld-zero-3.d: New file.
* gas/mips/mipsr6@loc-swap-dis.d: New file.
* gas/mips/mipsr6@mips32-cp2.d: New file.
* gas/mips/mipsr6@mips32-imm.d: New file.
* gas/mips/mipsr6@mips32.d: New file.
* gas/mips/mipsr6@mips32r2.d: New file.
* gas/mips/mipsr6@mips4-fp.d: New file.
* gas/mips/mipsr6@mips4-fp.l: New file.
* gas/mips/mipsr6@mips4-fp.s: New file.
* gas/mips/mipsr6@mips4.d: New file.
* gas/mips/mipsr6@mips5-fp.d: New file.
* gas/mips/mipsr6@mips5-fp.l: New file.
* gas/mips/mipsr6@mips5-fp.s: New file.
* gas/mips/mipsr6@mips64.d: New file.
* gas/mips/mipsr6@msa-branch.d: New file.
* gas/mips/mipsr6@msa.d: New file.
* gas/mips/mipsr6@pref.d: New file.
* gas/mips/mipsr6@relax-swap3.d: New file.
* gas/mips/r6-64-n32.d: New file.
* gas/mips/r6-64-n64.d: New file.
* gas/mips/r6-64-removed.l: New file.
* gas/mips/r6-64-removed.s: New file.
* gas/mips/r6-64.s: New file.
* gas/mips/r6-attr-none-double.d: New file.
* gas/mips/r6-n32.d: New file.
* gas/mips/r6-n64.d: New file.
* gas/mips/r6-removed.l: New file.
* gas/mips/r6-removed.s: New file.
* gas/mips/r6.d: New file.
* gas/mips/r6.s: New file.
* gas/mips/mipsr6@mips32-dsp.d: New file.
* gas/mips/mipsr6@mips32-dspr2.d: New file.
* gas/mips/mipsr6@mips32r2-ill.l: New file.
* gas/mips/mipsr6@mips32r2-ill.s: New file.
* gas/mips/cache.s: Add r6 instruction varients.
* gas/mips/mips.exp: Add support for the mips32r6 and mips64r6
architectures. Also prevent non r6 supported tests from running.
Finally, add in support for running the new r6 tests.
(run_dump_test_arch): Add support for mipsr6 tests.
(run_list_test_arch): Add support for using files of the
form arch@testname.l .
include/elf/
* mips.h: Add relocs: R_MIPS_PC21_S2, R_MIPS_PC26_S2, R_MIPS_PC18_S3,
R_MIPS_PC19_S2, R_MIPS_PCHI16 and R_MIPS_PCLO16.
(E_MIPS_ARCH_32R6): New define.
(E_MIPS_ARCH_64R6): New define.
include/opcode/
* mips.h (mips_operand_type): Add new entries: OP_SAME_RS_RT,
OP_CHECK_PREV and OP_NON_ZERO_REG. Add descriptions for the MIPS R6
instruction arguments: -a, -b, -d, -s, -t, -u, -v, -w, -x, -y, -A, -B,
+I, +O, +R, +:, +\, +", +;
(mips_check_prev_operand): New struct.
(INSN2_FORBIDDEN_SLOT): New define.
(INSN_ISA32R6): New define.
(INSN_ISA64R6): New define.
(INSN_UPTO32R6): New define.
(INSN_UPTO64R6): New define.
(mips_isa_table): Add INSN_UPTO32R6 and INSN_UPTO64R6.
(ISA_MIPS32R6): New define.
(ISA_MIPS64R6): New define.
(CPU_MIPS32R6): New define.
(CPU_MIPS64R6): New define.
(cpu_is_member): Add cases for CPU_MIPS32R6, and CPU_MIPS64R6.
ld/
* ldmain.c (get_emulation): Add support for -mips32r6 and -mips64r6.
opcodes/
* mips-dis.c (mips_arch_choices): Add entries for mips32r6 and
mips64r6.
(parse_mips_dis_option): Allow MSA and virtualization support for
mips64r6.
(mips_print_arg_state): Add fields dest_regno and seen_dest.
(mips_seen_register): New function.
(print_insn_arg): Refactored code to use mips_seen_register
function. Add support for OP_SAME_RS_RT, OP_CHECK_PREV and
OP_NON_ZERO_REG. Changed OP_REPEAT_DEST_REG case to print out
the register rather than aborting.
(print_insn_args): Add length argument. Add code to correctly
calculate the instruction address for pc relative instructions.
(validate_insn_args): New static function.
(print_insn_mips): Prevent jalx disassembling for r6. Use
validate_insn_args.
(print_insn_micromips): Use validate_insn_args.
all the arguments are valid.
* mips-formats.h (PREV_CHECK): New define.
* mips-opc.c (decode_mips_operand): Add support for -a, -b, -d, -s,
-t, -u, -v, -w, -x, -y, -A, -B, +I, +O, +R, +:, +\, +", +;
(RD_pc): New define.
(FS): New define.
(I37): New define.
(I69): New define.
(mips_builtin_opcodes): Add MIPS R6 instructions. Exclude recoded
MIPS R6 instructions from MIPS R2 instructions.
This change moves the microMIPS 10-bit uninterpreted immediate code
embedded at bits 25..16 in the SYSCALL, WAIT, SDBBP and HYPCALL
instructions from `B' over to `+J' which is the operand code used in
the standard MIPS instruction set for a similar code embedded at bits
20..11, currently used by HYPCALL only in that set.
opcodes/
* micromips-opc.c (decode_micromips_operand): Rename `B' to `+J'.
(micromips_opcodes): Use "+J" in place of "B" for "hypcall",
"sdbbp", "syscall" and "wait".
include/opcode/
* mips.h: Document the move of `MICROMIPSOP_*_CODE10' from `B'
over to `+J'.
2014-08-21 Nathan Sidwell <nathan@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
opcodes/
* arm-dis.c (print_arm_address): Negate the GPR-relative offset
returned if the U bit is set.
2014-08-21 Paul Brook <paul@codesourcery.com>
gas/testsuite/
* gas/arm/arch7a-mp.d: Adjust according to `print_arm_address'
offset fix.
* gas/arm/arch7r-mp.d: Likewise.
The 48-bit LI instruction encoding has been removed from the microMIPS
ISA and no implementation ever made that included it.
* micromips-opc.c (micromips_opcodes): Remove #ifdef-ed out
48-bit "li" encoding.
readability and also fixes some minor issues.
S/390: Split disassembler routine into smaller functions
S/390: Fix disassembler's treatment of signed/unsigned operands
S/390: Fix off-by-one error in disassembler initialization
S/390: Simplify opcode search loop in disassembler
S/390: Drop function pointer dereferences in disassembler
S/390: Various minor simplifications in disassembler
These multiple if statements can be condensed down into a single if
statement and an array of strings.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The variables used to track insn state should be pushed down into the
private_data structure to avoid pollution across calls.
This also happens to fix the output when hitting comments/invalid insns
which needs to tweak a gas test.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
If the user gives us an unaligned PC, then dump an error as such.
Otherwise if you try to disassemble at an odd address, the output
will look weird (it'll read one byte earlier).
This can be seen in one of the gas tests where data is in the middle
of .text, so move the data to .data like it should be in the first place.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The current code ignores memory read errors which isn't a great idea.
So add a helper function which takes care of error checking and update
the code to use that.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
gas/
* config/tc-mips.c: Rename INSN_LOAD_COPROC_DELAY to INSN_LOAD_COPROC
and INSN_COPROC_MOVE_DELAY to INSN_COPROC_MOVE throughout.
include/opcode/
* mips.h (INSN_LOAD_COPROC_DELAY): Rename to...
(INSN_LOAD_COPROC): New define.
(INSN_COPROC_MOVE_DELAY): Rename to...
(INSN_COPROC_MOVE): New define.
opcodes/
* micromips-opc.c (COD): Rename throughout to...
(CM): New define, update to use INSN_COPROC_MOVE.
(LCD): Rename throughout to...
(LC): New define, update to use INSN_LOAD_COPROC.
* mips-opc.c: Likewise.
Even though the opcodes were defined for these instructions,
the actual instruction definitions were lacking.
cpu/
* or1korbis.cpu (l-msync, l-psync, l-csync): New instructions.
opcodes/
* or1k-desc.c, * or1k-desc.h, * or1k-opc.c, * or1k-opc.h,
* or1k-opinst.c: Regenerate.
This removes usage of the obsolete AC_INIT and AM_INIT_AUTOMAKE in all
binutils configure.in files. The BFD version is now in bfd/version.m4
rather than bfd/configure.in, which allows automake to automatically
track this dependency.
bfd/
* version.m4: New file.
* configure.in: Include version.m4.
(AC_INIT): Update.
* Makefile.am (RELEASE): Delete.
(bfdver.h): Depend on development.sh, use instead of RELEASE.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
opcodes/
* configure.in: Include bfd/version.m4.
(AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
(BFD_VERSION): Delete.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
* configure: Regenerate.
* Makefile.in: Regenerate.
binutils/
* configure.in: Include bfd/version.m4.
(AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
(BFD_VERSION): Delete.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
* configure: Regenerate.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
gas/
* configure.in: Include bfd/version.m4.
(AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
(BFD_VERSION): Delete.
* configure.com: Get bfd version from bfd/version.m4.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
* configure: Regenerate.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
gprof/
* configure.in: Include bfd/version.m4.
(AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
(BFD_VERSION): Delete.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
* configure: Regenerate.
* Makefile.in: Regenerate.
ld/
* configure.in: Include bfd/version.m4.
(AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
(BFD_VERSION): Delete.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
* configure: Regenerate.
* Makefile.in: Regenerate.
* archures.c: add avrtiny architecture for avr target.
* bfd-in2.h: Regenerate.
* cpu-avr.c (arch_info_struct): add avrtiny arch info.
* elf32-avr.c (elf_avr_howto_table): new relocation R_AVR_LDS_STS_16
added for 16 bit LDS/STS instruction of avrtiny arch.
(avr_reloc_map): reloc R_AVR_LDS_STS_16 is mapped to
BFD_RELOC_AVR_LDS_STS_16.
(bfd_elf_avr_final_write_processing): select machine number avrtiny arch.
(elf32_avr_object_p): set machine number for avrtiny arch.
* libbfd.h: Regenerate.
* reloc.c: Add documentation for BFD_RELOC_AVR_LDS_STS_16 reloc.
* config/tc-avr.c (mcu_types): Add avrtiny arch.
Add avrtiny arch devices attiny4, attiny5, attiny9, attiny10, attiny20
and attiny40.
(md_show_usage): Add avrtiny arch in usage message.
(avr_operand): validate and issue error for invalid register for avrtiny.
add new reloc exp for 16 bit lds/sts instruction.
(md_apply_fix): check 16 bit lds/sts operand for out of range and encode.
(md_assemble): check ISA for arch and issue diagnostic.
* include/elf/avr.h (E_AVR_MACH_AVRTINY): define avrtiny machine number.
(R_AVR_LDS_STS_16): define 16 bit lds/sts reloc number.
* include/opcode/avr.h (AVR_ISA_TINY): define avrtiny specific ISA.
(AVR_ISA_2xxxa): define ISA without LPM.
(AVR_ISA_AVRTINY): define avrtiny arch ISA.
Add doc for contraint used in 16 bit lds/sts.
Adjust ISA group for icall, ijmp, pop and push.
Add 16 bit lds/sts encoding and update 32 bit lds/sts constraints.
* opcodes/avr-dis.c (avr_operand): Handle constraint j for 16 bit lds/sts.
(print_insn_avr): do not select opcode if insn ISA is avrtiny and machine
is not avrtiny.
* Makefile.am (ALL_EMULATION_SOURCES): add avrtiny emulation source.
(eavrtiny.c): add rules for avrtiny emulation source.
* Makefile.in: Regenerate.
* configure.tgt: Add avrtiny to avr target emulations.
* scripttempl/avrtiny.sc: New file.
linker script template for avrtiny arch.
* emulparams/avrtiny.sh: New file.
emulation parameters for avrtiny arch.
There are legitimate reasons to allow a signed value in a cmpli insn
field, for example to test for a "stw r1,lock@sdarel(r13)" instruction
in user code, a kernel might use
subis r3,r3,STW_R1_0R13@ha # subtract off high part
cmplwi r3,lock@sdarel # is low part accessing lock?
Since the lock@sdarel may take a range of -32768 to 32767,
the allowed range of cmpli immediate must be at least [-32768,65535].
bfd/
* elf32-ppc.c (ppc_elf_relocate_section): Treat field of cmpli
insn as a bitfield; Use complain_overflow_bitfield.
* elf64-ppc.c (ppc64_elf_relocate_section): Likewise.
opcodes/
* ppc-opc.c (UISIGNOPT): Define and use with cmpli.
gas/
* config/tc-ppc.c (ppc_insert_operand): Handle PPC_OPERAND_SIGNOPT
on unsigned fields. Comment on PPC_OPERAND_SIGNOPT signed fields
in 64-bit mode.
gold/
* powerpc.cc (relocate): Treat field of cmpli insn as a bitfield.
The goal of this patch is to provide an easy way to make
--disable-werror the default when building binutils, or the parts
of binutils that need to get built when building GDB. In development
mode, we want to continue making -Werror the default with GCC.
But, when making releases, I think we want to make it as easy as
possible for regular users to successfully build from sources.
GDB already has this kind of feature to turn -Werror as well as
the use of the libmcheck library. As GDB Release Manager, I take
advantage of it to turn those off after having cut the branch.
I'd like to be able to do the same for the binutils bits. And
perhaps Tristan will want to do the same for his releases too
(not sure, binutils builders might be a little savvier than GDB
builders).
This patch introduces a new file, called development.sh, which
just sets a variable called $development. In our development branches
(Eg. "master"), it's set to true. But setting it to false would allow
us to change the default behavior of various development-related
features to be turned off; in this case, it turns off the use of
-Werror by default (use --enable-werror to turn it back on).
bfd/ChangeLog:
* development.sh: New file.
* warning.m4 (AM_BINUTILS_WARNINGS): Source bfd/development.sh.
Make -Werror the default with GCC only if DEVELOPMENT is true.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add
$(srcdir)/development.sh.
* Makefile.in, configure: Regenerate.
binutils/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
gas/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
gold/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): New.
* Makefile.in, configure: Regenerate.
gprof/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
ld/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
opcodes/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
gdb/ChangeLog:
* development.sh: Delete.
* Makefile.in (config.status): Adjust dependency on development.sh.
* configure.ac: Adjust development.sh source call.
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
* configure.ac: Adjust development.sh source call.
* Makefile.in (config.status): Adjust dependency on development.sh.
* configure: Regenerate.
Tested on x86_64-linux by building two ways: One with DEVELOPMENT
set to true, and one with DEVELOPMENT set to false. In the first
case, I could see the use of -Werror, while it disappeared in
the second case.
This adds support for the load-link/store-conditional
l.lwa/l.swa atomic instructions.
The support is added in such way, that the cpu description not
only describes the mnemonics, but also the functionality.
A couple of fixes to typos in nearby/related code are also snuck
into this.
cpu/
* or1korbis.cpu (h-atomic-reserve): New hardware.
(h-atomic-address): Likewise.
(insn-opcode): Add opcodes for LWA and SWA.
(atomic-reserve): New operand.
(atomic-address): Likewise.
(l-lwa, l-swa): New instructions.
(l-lbs): Fix typo in comment.
(store-insn): Clear atomic reserve on store to atomic-address.
Fix register names in fmt field.
opcodes/
* or1k-desc.c: Regenerated.
* or1k-desc.h: Likewise.
* or1k-opc.c: Likewise.
* or1k-opc.h: Likewise.
* or1k-opinst.c: Likewise.
This patch firstly adds support for mips32r3 mips32r5, mips64r3
and mips64r5. Secondly it adds support for the eretnc instruction.
ChangeLog:
bfd/
* aoutx.h (NAME (aout, machine_type)): Add mips32r3, mips64r3,
mips32r5 and mips64r5.
* archures.c (bfd_architecture): Likewise.
* bfd-in2.h (bfd_architecture): Likewise.
* cpu-mips.c (arch_info_struct): Likewise.
* elfxx-mips.c (mips_set_isa_flags): Likewise.
gas/
* tc-mips.c (ISA_SUPPORTS_MIPS16E): Add mips32r3, mips32r5, mips64r3
and mips64r5.
(ISA_HAS_64BIT_FPRS): Likewise.
(ISA_HAS_ROR): Likewise.
(ISA_HAS_ODD_SINGLE_FPR): Likewise.
(ISA_HAS_MXHC1): Likewise.
(hilo_interlocks): Likewise.
(md_longopts): Likewise.
(ISA_HAS_64BIT_REGS): Add mips64r3 and mips64r5.
(ISA_HAS_DROR): Likewise.
(options): Add OPTION_MIPS32R3, OPTION_MIPS32R5, OPTION_MIPS64R3, and
OPTION_MIPS64R5.
(mips_isa_rev): Add support for mips32r3, mips32r5, mips64r3 and
mips64r5.
(md_parse_option): Likewise.
(s_mipsset): Likewise.
(mips_cpu_info_table): Add entries for mips32r3, mips32r5, mips64r3
and mips64r5. Also change p5600 entry to be mips32r5.
* configure.in: Add support for mips32r3, mips32r5, mips64r3 and
mips64r5.
* configure: Regenerate.
* doc/c-mips.texi: Document the -mips32r3, -mips32r5, -mips64r3 and
-mips64r5 command line options.
* doc/as.texinfo: Likewise.
gas/testsuite/
* gas/mips/mips.exp: Add MIPS32r5 tests. Also add the mips32r3,
mips32r5, mips64r3 and mips64r5 isas to the testsuite.
* gas/mips/r5.s: New test.
* gas/mips/r5.d: Likewise.
include/opcode/
* mips.h (INSN_ISA_MASK): Updated.
(INSN_ISA32R3): New define.
(INSN_ISA32R5): New define.
(INSN_ISA64R3): New define.
(INSN_ISA64R5): New define.
(INSN_ISA64, INSN_ISA64R2, INSN_ISA3_32, INSN_ISA3_32R2, INSN_ISA4_32
INSN_ISA4_32R2, INSN_ISA5_32R2): Renumbered.
(mips_isa_table): Add entries for mips32r3, mips32r5, mips64r3 and
mips64r5.
(INSN_UPTO32R3): New define.
(INSN_UPTO32R5): New define.
(INSN_UPTO64R3): New define.
(INSN_UPTO64R5): New define.
(ISA_MIPS32R3): New define.
(ISA_MIPS32R5): New define.
(ISA_MIPS64R3): New define.
(ISA_MIPS64R5): New define.
(CPU_MIPS32R3): New define.
(CPU_MIPS32R5): New define.
(CPU_MIPS64R3): New define.
(CPU_MIPS64R5): New define.
opcodes/
* mips-opc.c (mips_builtin_opcodes): Add MIPS32r5 eretnc instruction.
(I34): New define.
(I36): New define.
(I66): New define.
(I68): New define.
* mips-dis.c (mips_arch_choices): Add mips32r3, mips32r5, mips64r3 and
mips64r5.
(parse_mips_dis_option): Update MSA and virtualization support to
allow mips64r3 and mips64r5.
This fixes an issue with Mark Shinwell's "Rearrange MIPS INSN* masks" patch
(https://sourceware.org/ml/binutils/2007-11/msg00231.html). In the patch
the pref instruction had its membership flags changed from I4|I32|G3 to
I4_32|G3. Unfortunately G3 was defined as being I4, which made the actual
expanded flags as: I4|I32|I4 and therefore the membership flags should have
been I4_32. Since the patch was committed G3 was redefined to be I4|EE. This
fix just removes I4 from G3 making the expanded membership flags for pref as
I4_32|EE.
ChangeLog:
opcodes/
* mips-opc.c (G3): Remove I4.
This patch updates multiple opcode prefix processing:
1. Always print prefix together with bad opcode.
2. Since the last seen segment register prefix is active, we only print
the active segment register in the memory operand.
3. The 0xf2 and 0xf3 prefixes take precedence over the 0x66 prefix as the
opcode prefix. Also the last of the 0xf2 and 0xf3 prefixes wins.
4. Ignore invalid 0xf2/0xf3 prefixes if they aren't mandatory.
gas/testsuite/
PR binutils/16893
* gas/i386/katmai.d: Expect "gs" as prefix.
* gas/i386/long-1.s: Replace movapd with movss.
* gas/i386/x86-64-long-1.s: Likewise.
* gas/i386/long-1-intel.d: Updated.
* gas/i386/long-1.d: Likewise.
* gas/i386/x86-64-long-1-intel.d: Likewise.
* gas/i386/x86-64-long-1.d: Likewise.
* gas/i386/prefix.s: Add tests for multiple 0x66, 0x67, 0xf0,
0xf2 and 0xf3 prefixes.
* gas/i386/prefix.d: Updated.
opcodes/
PR binutils/16893
* i386-dis.c (twobyte_has_mandatory_prefix): New variable.
(end_codep): Likewise.
(mandatory_prefix): Likewise.
(active_seg_prefix): Likewise.
(ckprefix): Set active_seg_prefix to the active segment register
prefix.
(seg_prefix): Removed.
(get_valid_dis386): Use the last of PREFIX_REPNZ and PREFIX_REPZ
for prefix index. Ignore the index if it is invalid and the
mandatory prefix isn't required.
(print_insn): Set mandatory_prefix if the PREFIX_XXX prefix is
mandatory. Don't set PREFIX_REPZ/PREFIX_REPNZ/PREFIX_LOCK bits
in used_prefixes here. Don't print unused prefixes. Check
active_seg_prefix for the active segment register prefix.
Restore the DFLAG bit in sizeflag if the data size prefix is
unused. Check the unused mandatory PREFIX_XXX prefixes
(append_seg): Only print the segment register which gets used.
(OP_E_memory): Check active_seg_prefix for the segment register
prefix.
(OP_OFF): Likewise.
(OP_OFF64): Likewise.
(OP_DSreg): Set active_seg_prefix to PREFIX_DS if it is unset.
sigsetjmp/siglongjmp without saving the signal mask is faster than
setjmp/longjmp on systems where the signal mask is saved. This patch
uses sigsetjmp/siglongjmp without saving the signal mask if possible.
PR binutils/16886
* config.in: Regenerated.
* configure: Likewise.
* configure.in: Check if sigsetjmp is available.
* h8500-dis.c (private): Replace jmp_buf with OPCODES_SIGJMP_BUF.
(fetch_data): Replace longjmp with OPCODES_SIGLONGJMP.
(print_insn_h8500): Replace setjmp with OPCODES_SIGSETJMP.
* i386-dis.c (dis_private): Replace jmp_buf with OPCODES_SIGJMP_BUF.
(fetch_data): Replace longjmp with OPCODES_SIGLONGJMP.
(print_insn): Replace setjmp with OPCODES_SIGSETJMP.
* ns32k-dis.c (private): Replace jmp_buf with OPCODES_SIGJMP_BUF.
(fetch_data): Replace longjmp with OPCODES_SIGLONGJMP.
(print_insn_ns32k): Replace setjmp with OPCODES_SIGSETJMP.
* sysdep.h (OPCODES_SIGJMP_BUF): New macro.
(OPCODES_SIGSETJMP): Likewise.
(OPCODES_SIGLONGJMP): Likewise.
* vax-dis.c (private): Replace jmp_buf with OPCODES_SIGJMP_BUF.
(fetch_data): Replace longjmp with OPCODES_SIGLONGJMP.
(print_insn_vax): Replace setjmp with OPCODES_SIGSETJMP.
* xtensa-dis.c (dis_private): Replace jmp_buf with
OPCODES_SIGJMP_BUF.
(fetch_data): Replace longjmp with OPCODES_SIGLONGJMP.
(print_insn_xtensa): Replace setjmp with OPCODES_SIGSETJMP.
* z8k-dis.c(instr_data_s): Replace jmp_buf with OPCODES_SIGJMP_BUF.
(fetch_data): Replace longjmp with OPCODES_SIGLONGJMP.
(print_insn_z8k): Replace setjmp with OPCODES_SIGSETJMP.
0x9b (fwait) is both an instruction and an opcode prefix. When 0x9b is
treated as an instruction, we need to handle any prefixes before it.
This patch handles it properly.
gas/testsuite/
PR binutils/16891
* gas/i386/opcode.s: Add test for fwait with prefix.
* gas/i386/opcode-intel.d: Updated.
* gas/i386/opcode-suffix.d: Likewise.
* gas/i386/opcode.d: Likewise.
opcodes/
PR binutils/16891
* i386-dis.c (print_insn): Handle prefixes before fwait.
ChangeLog:
binutils/
* doc/binutils.texi: Document the disassemble MIPS XPA instructions
command line option.
gas/
* config/tc-mips.c (options): Add OPTION_XPA and OPTION_NO_XPA.
(md_longopts): Add xpa and no-xpa command line options.
(mips_ases): Add MIPS XPA ASE.
(mips_cpu_info_table): Update p5600 entry to allow the XPA ASE.
* doc/as.texinfo: Document the MIPS XPA command line options.
* doc/c-mips.texi: Document the MIPS XPA command line options,
and assembler directives.
gas/testsuite/
* gas/mips/mips.exp: Add xpa tests.
* gas/mips/xpa.s: New test.
* gas/mips/xpa.d: Likewise.
include/
* opcode/mips.h (ASE_XPA): New define.
opcodes/
* mips-dis.c (mips_arch_choices): Update mips32r2 and mips64r2
to allow the MIPS XPA ASE.
(parse_mips_dis_option): Process the -Mxpa option.
* mips-opc.c (XPA): New define.
(mips_builtin_opcodes): Add MIPS XPA instructions and move the
locations of the ctc0 and cfc0 instructions.
For gathers with indices larger than elements (e. g.)
vpgatherqd ymm6{k1}, ZMMWORD PTR [ebp+zmm7*8-123]
We currently treat memory size as a size of index register, while it is
actually should be size of destination register:
vpgatherqd ymm6{k1}, YMMWORD PTR [ebp+zmm7*8-123]
This patch fixes it.
opcodes/
* i386-opc.tbl: Change memory size for vgatherpf0qps, vgatherpf1qps,
vscatterpf0qps, vscatterpf1qps, vgatherqps, vpgatherqd, vpscatterqd,
vscatterqps.
* i386-tbl.h: Regenerate.
gas/testsuite/
* gas/i386/avx512pf-intel.d: Change memory size for vgatherpf0qps,
vgatherpf1qps, vscatterpf0qps, vscatterpf1qps.
* gas/i386/avx512pf.s: Ditto.
* gas/i386/x86-64-avx512pf-intel.d: Ditto.
* gas/i386/x86-64-avx512pf.s: Ditto.
* gas/i386/avx512f-intel.d: Change memory size for vgatherqps,
vpgatherqd, vpscatterqd, vscatterqps.
* gas/i386/avx512f.s: Ditto.
* gas/i386/x86-64-avx512f-intel.d: Ditto.
* gas/i386/x86-64-avx512f.s: Ditto.
and %hstick_enable to the Sparc assembler.
* config/tc-sparc.c (hpriv_reg_table): Added entries for
%hstick_offset and %hstick_enable.
* doc/c-sparc.texi (Sparc-Regs): Document the %hstick_offset and
%hstick_enable hyperprivileged registers.
* sparc-dis.c (v9_hpriv_reg_names): Names for %hstick_offset and
%hstick_enable added.
* gas/sparc/rdhpr.s: Test rd %hstick_offset and %hstick_enable.
* gas/sparc/rdhpr.d: Likewise.
* gas/sparc/wrhpr.s: Test wr %hstick_offset and %hstick_enable.
* gas/sparc/wrhpr.d: Likewise.
* rx-decode.opc (bwl): Allow for bogus instructions with a size
field of 3.
(sbwl, ubwl, SCALE): Likewise.
* rx-decode.c: Regenerate.
* gas/rx/mov.d: Update expected disassembly.
2014-02-04 Heiher <r@hev.cc>
* elfxx-mips.c (mips_set_isa_flags): Use E_MIPS_ARCH_64R2 for
Loongson-3A.
(mips_mach_extensions): Make bfd_mach_mips_loongson_3a an
extension of bfd_mach_mipsisa64r2.
opcodes/
2014-02-04 Heiher <r@hev.cc>
* mips-dis.c (mips_arch_choices): Usee ISA_MIPS64R2 for Loongson-3A.
gas/
2014-02-04 Heiher <r@hev.cc>
* config/tc-mips.c (mips_cpu_info_table): Use ISA_MIPS64R2 for
Loongson-3A.
We currently support version of vcvtps2ph with sae and only 1 register operand.
This version is encoded as if missing operand was equal to ymm0.
I didn't found any references to this variant in
http://download-software.intel.com/sites/default/files/managed/50/1a/319433-018.pdf
This patch removes it.
opcodes/
* i386-opc.tbl: Remove wrong variant of vcvtps2ph
* i386-tbl.h: Regenerate.
binutils/
* version.c (print_version): Update copyright year to 2014.
gas/
* as.c (parse_args): Update copyright year to 2014.
gold/
* version.cc (print_version): Update copyright year to 2014.
ld/
* ldver.c (ldversion): Update copyright year to 2014.
opcodes/
* i386-gen.c (process_copyright): Update copyright year to 2014.
Add two more as test files for user special and system register.
Fix typo.
2013-12-17 Kuan-Lin Chen <kuanlinchentw@gmail.com>
* gas/nds32/nds32.exp: Add system and user special register tests.
* gas/nds32/sys-reg.s: New test.
* gas/nds32/sys-reg.d: Likewise.
* gas/nds32/usr-spe-reg.s: Likewise.
* gas/nds32/usr-spe-reg.d: Likewise.
* gas/nds32/alu-2.d: Delete the new blank line at EOF.
* gas/nds32/br-1.d: Likewise.
* gas/nds32/br-2.d: Likewise.
* gas/nds32/ji-jr.d: Likewise.
* gas/nds32/lsi.d: Likewise.
* nds32-dis.c (sr_map): Add system register table for disassembling.
(usr_map): Fix typo.
* nds32-asm.c (keyword_sr): Add embedded debug registers.
2013-12-16 Andrew Bennett <andrew.bennett@imgtec.com>
gas/testsuite/gas/mips/
* mips.exp: Add CP1 register name tests.
* cp1-names-mips32.d: New test.
* cp1-names-mips32r2.d: New test.
* cp1-names-mips64.d: New test.
* cp1-names-mips64r2.d: New test.
* cp1-names-numeric.d: New test.
* cp1-names-r3000.d: New test.
* cp1-names-r4000.d: New test.
* cp1-names-sb1.d: New test.
* cp1-names.s: New test.
* micromips-insn32.d: Add the correct symbolic names for the CP1
registers.
* micromips-noinsn32.d: Likewise.
* micromips-trap.d: Likewise.
* micromips.d: Likewise.
opcodes/
* mips-dis.c: Add mips_cp1_names pointer.
(mips_cp1_names_numeric): New array.
(mips_cp1_names_mips3264): New array.
(mips_arch_choice): Add cp1_names.
(mips_arch_choices): Add relevant cp1 register name array to each of
the elements.
(set_default_mips_dis_options): Add support for setting up the
mips_cp1_names pointer.
(parse_mips_dis_option): Add support for the cp1-names command line
variable. Also setup the mips_cp1_names pointer.
(print_reg): Print out name of the cp1 register.
The element index range for the following MIPS MSA instructions: sldi, splati,
copy_s, copy_u, insert and insve is 1 bit too large. This patch fixes this issue.
ChangeLog:
gas/testsuite/gas/mips/
* msa.s: Reduced maximum element index range for sldi, splati,
copy_s, copy_u, insert and insve instructions.
* msa64.s: Likewise.
* micromips@msa.d: Likewise.
* micromips@msa64.d: Likewise.
* msa.d: Likewise.
* msa64.d: Likewise.
include/opcode/
* mips.h: Updated description of +o, +u, +v and +w for MIPS and
microMIPS.
opcodes/
* micromips-opc.c (decode_micromips_operand): Reduced range of +o, +u,
+v and +w.
(micromips_opcodes): Reduced element index range for sldi, splati,
copy_s, copy_u, insert and insve instructions.
* opcodes/mips-opc.c (decode_mips_operand): Reduced range of +o, +u,
+v and +w.
(mips_builtin_opcodes): Reduced element index range for sldi, splati,
copy_s, copy_u, insert and insve instructions.
* config/tc-aarch64.c (set_other_error): New function.
(parse_sys_reg): Add new parameter 'sys_reg' and if non-NULL set
the variable to which it points with 'o'.
(parse_operands): Update; check for write to read-only system
registers or read from write-only ones.
gas/testsuite/
* gas/aarch64/diagnostic.s: Add tests.
* gas/aarch64/diagnostic.l: Update.
* gas/aarch64/tracereg-illegal.d: New file.
* gas/aarch64/tracereg-illegal.l: Ditto.
* gas/aarch64/tracereg-illegal.s: Ditto.
* gas/aarch64/tracereg.d: Ditto.
* gas/aarch64/tracereg.s: Ditto.
include/opcode
* aarch64.h (aarch64_sys_reg_readonly_p): New declaration.
(aarch64_sys_reg_writeonly_p): Ditto.
opcodes/
* aarch64-opc.c (CPENT): New define.
(F_READONLY, F_WRITEONLY): Likewise.
(aarch64_sys_regs): Add trace unit registers.
(aarch64_sys_reg_readonly_p): New function.
(aarch64_sys_reg_writeonly_p): Ditto.
* config/tc-aarch64.c (parse_sys_reg): Update to use aarch64_sys_reg;
call aarch64_sys_reg_deprecated_p and warn about the deprecated
system registers.
gas/testsuite/
* gas/aarch64/deprecated.d: New file.
* gas/aarch64/deprecated.l: New file.
* gas/aarch64/deprecated.s: New file.
* gas/aarch64/sysreg-1.s: Add tests.
* gas/aarch64/sysreg-1.d: Add tests.
include/opcode/
* aarch64.h (aarch64_sys_reg): New typedef.
(aarch64_sys_regs): Change to define with the new type.
(aarch64_sys_reg_deprecated_p): Declare.
opcodes/
* aarch64-opc.c (F_DEPRECATED): New macro.
(aarch64_sys_regs): Update; flag "spsr_svc" and "spsr_hyp" with
F_DEPRECATED.
(aarch64_print_operand): Call aarch64_sys_reg_deprecated_p on
AARCH64_OPND_SYSREG.
Currently the disassembler for s390 (by default) assumes that a 31-bit
binary was compiled in "ESA" mode -- and then only disassembles a
limited opcode set. The change upgrades the default to the full "zarch"
opcode set even for 31-bit binaries.
opcodes/
* s390-dis.c (init_disasm): Default to full 'zarch' opcode
availability even for 31-bit programs.
opcodes/
* nios2-opc.c (nios2_builtin_reg): Use "sstatus" rather than "ba"
as the primary name of r30.
gas/
* config/tc-nios2.c (nios2_consume_arg): Make the "ba" warning
also test/refer to "sstatus". Reformat the warning message.
gas/testsuite/
* gas/nios2/warn_nobreak.l: Update text of warning messages.
* gas/nios2/registers.s: Use "sstatus" rather than "ba"
as the primary name of r30.
* gas/nios2/registers.d: Likewise.
* cr16-opc.c (REG): Cast NAME to 'reg' enum type to suppress
possible compiler warnings when the union's initializer is
actually meant for the 'preg' enum typed member.
* crx-opc.c (REG): Likewise.
2013-10-08 Jan Beulich <jbeulich@suse.com>
* i386-opc.tbl (invlpg): Use Anysize instead of Unspecified.
(clflush): Use Anysize instead of Byte|Unspecified.
(prefetch*): Likewise.
* i386-tbl.h: Re-generate.
* config/tc-arm.c (T16_32_TAB): Add _udf.
(do_t_udf): New function.
(insns): Add "udf".
* gas/arm/udf-bad.s: New file.
* gas/arm/udf-bad.d: New file.
* gas/arm/udf-bad.l: New file.
* gas/arm/udf.s: New file.
* gas/arm/udf.d: New file.
* gas/arm/udf.l: New file.
* arm-dis.c (arm_opcodes): Add udf.
(thumb_opcodes): Use "udf" mnemonic rather than UNDEFINED_INSTRUCTION.
(thumb32_opcodes): Add udf.w.
(print_insn_thumb32): Handle %H as the thumb32_opcodes comment says.
* s390-opc.txt: Fix description for fiebra, fidbra, and fixbra.
For the load fp integer instructions only the suppression flag was
new with z196 version.
immediate is not suitable for the 32-bit ABI.
* gas/aarch64/illegal.s: Add illegal constant for logical
operation.
* gas/aarch64/illegal.l: Add expected error message.
* mips.h (M_DEXT, M_DINS): Delete.
opcodes/
* micromips-opc.c (micromips_opcodes): Replace "dext" and "dins"
macro entries with "dextm", "dextu", "dinsm" and "dinsu" aliases.
Use +H rather than +C for the real "dext".
* mips-opc.c (mips_builtin_opcodes): Likewise.
gas/
* config/tc-mips.c (report_bad_range, report_bad_field): Delete.
(macro): Remove M_DEXT and M_DINS handling.
gas/testsuite/
* gas/mips/ext-ill.l, gas/mips/mips64r2-ill.l: Expect DEXT and DINS
error messages to have the same form as the EXT and INS ones.
* gas/mips/micromips-insn32.d, gas/mips/micromips-noinsn32.d,
gas/mips/micromips-trap.d, gas/mips/micromips.d,
gas/mips/micromips@mips64r2.d, gas/mips/mips64r2.d: Expect
"dext" and "dins" instead of "dextm", "dextu", "dinsm" and "dinsu".
2013-08-06 Jürgen Urban <JuergenUrban@gmx.de>
* mips-opc.c (mips_builtin_opcodes): Add a suffixless version of
VCLIPW.
gas/
2013-08-06 Jürgen Urban <JuergenUrban@gmx.de>
* config/tc-mips.c (match_vu0_suffix_operand): Allow single-channel
suffixes to be elided too.
(mips_lookup_insn): Don't reject INSN2_VU0_CHANNEL_SUFFIX here.
(mips_ip): Assume .xyzw if no VU0 suffix is specified. Allow +N
to be omitted too.
gas/testsuite/
2013-08-06 Jürgen Urban <JuergenUrban@gmx.de>
* gas/mips/r5900-error-vu0.s, gas/mips/r5900-error-vu0.l,
gas/mips/r5900-full-vu0.s, gas/mips/r5900-full-vu0.d: Allow
single-channel suffixes to be elided.
2013-08-04 Jürgen Urban <JuergenUrban@gmx.de>
Richard Sandiford <rdsandiford@googlemail.com>
* mips.h: Document new VU0 operand characters.
(OP_VU0_SUFFIX, OP_VU0_MATCH_SUFFIX): New mips_operand_types.
(OP_REG_VF, OP_REG_VI, OP_REG_R5900_I, OP_REG_R5900_Q, OP_REG_R5900_R)
(OP_REG_R5900_ACC): New mips_reg_operand_types.
(INSN2_VU0_CHANNEL_SUFFIX): New macro.
(mips_vu0_channel_mask): Declare.
opcodes/
2013-08-04 Jürgen Urban <JuergenUrban@gmx.de>
Richard Sandiford <rdsandiford@googlemail.com>
* mips-dis.c (print_reg): Handle OP_REG_VI, OP_REG_VF, OP_REG_R5900_I,
OP_REG_R5900_Q, OP_REG_R5900_R and OP_REG_R5900_ACC.
(print_vu0_channel): New function.
(print_insn_arg): Handle OP_VU0_SUFFIX and OP_VU0_MATCH_SUFFIX.
(print_insn_args): Handle '#'.
(print_insn_mips): Handle INSN2_VU0_CHANNEL_SUFFIX.
* mips-opc.c (mips_vu0_channel_mask): New constant.
(decode_mips_operand): Handle new VU0 operand types.
(VU0, VU0CH): New macros.
(mips_builtin_opcodes): Add VU0 opcodes. Use "+7" rather than "E"
for LQC2 and SQC2. Use "+9" rather than "G" for EE CFC2 and CTC2.
Use "+6" rather than "G" for QMFC2 and QMTC2.
gas/
2013-08-04 Jürgen Urban <JuergenUrban@gmx.de>
Richard Sandiford <rdsandiford@googlemail.com>
* config/tc-mips.c (MAX_OPERANDS): Bump to 6.
(RWARN): Bump to 0x8000000.
(RTYPE_VI, RTYPE_VF, RTYPE_R5900_I, RTYPE_R5900_Q, RTYPE_R5900_R)
(RTYPE_R5900_ACC): New register types.
(RTYPE_MASK): Include them.
(R5900_I_NAMES, R5900_Q_NAMES, R5900_R_NAMES, R5900_ACC_NAMES): New
macros.
(reg_names): Include them.
(mips_parse_register_1): New function, split out from...
(mips_parse_register): ...here. Add a channels_ptr parameter.
Look for VU0 channel suffixes when nonnull.
(reg_lookup): Update the call to mips_parse_register.
(mips_parse_vu0_channels): New function.
(OT_CHANNELS, OT_DOUBLE_CHAR): New mips_operand_token_types.
(mips_operand_token): Add a "channels" field to the union.
Extend the comment above "ch" to OT_DOUBLE_CHAR.
(mips_parse_base_start): Match -- and ++. Handle channel suffixes.
(mips_parse_argument_token): Handle channel suffixes here too.
(validate_mips_insn): Handle INSN2_VU0_CHANNEL_SUFFIX.
Ignore OP_VU0_MATCH_SUFFIX when calculating the used bits.
Handle '#' formats.
(md_begin): Register $vfN and $vfI registers.
(operand_reg_mask): Handle OP_VU0_SUFFIX and OP_VU0_MATCH_SUFFIX.
(convert_reg_type): Handle OP_REG_VI, OP_REG_VF, OP_REG_R5900_I,
OP_REG_R5900_Q, OP_REG_R5900_R and OP_REG_R5900_ACC.
(match_vu0_suffix_operand): New function.
(match_operand): Handle OP_VU0_SUFFIX and OP_VU0_MATCH_SUFFIX.
(macro): Use "+7" rather than "E" for LDQ2 and STQ2.
(mips_lookup_insn): New function.
(mips_ip): Use it. Allow "+K" operands to be elided at the end
of an instruction. Handle '#' sequences.
gas/testsuite/
2013-08-04 Jürgen Urban <JuergenUrban@gmx.de>
* gas/mips/r5900-vu0.d: Expect $vfN and $viN instead of numeric
coprocessor registers.
* gas/mips/r5900-all-vu0.s, gas/mips/r5900-all-vu0.d,
gas/mips/r5900-full-vu0.s, gas/mips/r5900-full-vu0.d,
gas/mips/r5900-error-vu0.s, gas/mips/r5900-error-vu0.l: New tests.
* gas/mips/mips.exp: Run them.
* mips.h (mips_pcrel_operand): Inherit from mips_int_operand.
(mips_int_operand_min, mips_int_operand_max): New functions.
(mips_decode_pcrel_operand): Use mips_decode_int_operand.
opcodes/
* mips-formats.h (PCREL): Reorder parameters and update the definition
to match new mips_pcrel_operand layout.
(JUMP, JALX, BRANCH): Update accordingly.
* mips16-opc.c (decode_mips16_operand): Likewise.
gas/
* config/tc-mips.c (match_int_operand): Use mips_int_operand_min
and mips_int_operand_max.
(mips16_immed_operand, mips16_immed_operands, MIPS16_NUM_IMMED):
Delete.
(mips16_immed_operand, mips16_immed_in_range_p): New functions.
(mips16_immed, mips16_extended_frag): Use them. Use mips_int_operand
instead of mips16_immed_operand.
