Gold version of git commit c213164ad2.
elfcpp/
* powerpc.h (R_PPC64_TPREL34, R_PPC64_DTPREL34),
(R_PPC64_GOT_TLSGD34, R_PPC64_GOT_TLSLD34),
(R_PPC64_GOT_TPREL34, R_PPC64_GOT_DTPREL34): Define.
gold/
* powerpc.cc (Target_powerpc::Scan::get_reference_flags): Set
flags for new relocations, and some missing older relocs.
(Target_powerpc::Scan::local): Handle new pcrel tls relocs.
Call set_has_static_tls for tprel relocs.
(Target_powerpc::Scan::global): Likewise.
(Target_powerpc::Relocate::relocate): Handle new pcrel tls relocs.
Relocations with right shifts were calculating wrong overflow status.
Since the addr34 split-field reloc is implemented as an 18-bit high
part with value shifted right by 16 and a 16-bit low part, most of the
pc-relative relocs were affected.
* powerpc.cc (Powerpc_relocate_functions::rela, rela_ua): Perform
signed right shift for signed overflow check.
Note that gold won't remove unused GOT entries, in contrast to ld.bfd
which will.
* powerpc.cc (Powerpc_relobj::make_got_relative): New function.
(relative_value_is_known): New functions.
(Target_powerpc::Relocate::relocate): Edit code using
GOT16_HA, GOT16_LO_DS, and GOT_PCREL34 relocs.
When generating notoc call and branch stubs without the benefit of
pc-relative insns, the stubs need to use LR to access the run time PC.
All LR changes must be described in .eh_frame if we're to support
unwinding through asynchronous exceptions. That's what this patch
does.
The patch has gone through way too many iterations. At first I
attempted to add multiple FDEs, one for each stub. That ran into
difficulties with do_plt_fde_location which is only capable of setting
the address of a single FDE per Output_data section, and with removing
any FDEs added on a previous do_relax pass. Removing FDEs (git commit
be897fb774) went overboard in matching the FDE contents. That means
either stashing the contents created for add_eh_frame_for_plt to use
when calling remove_eh_frame_for_plt, or recreating contents on the
fly (*) just to remove FDEs. In fact, FDE content matching is quite
unnecesary. FDEs added by a previous do_relax pass are those with
u_.from_linker.post_map set. So they can easily be recognised just by
looking at that flag. This patch keeps that part of the multiple FDE
changes.
In the end I went for just one FDE per stub group to describe the call
stubs. That's reasonably efficient for the common case of only
needing to describe the __tls_get_addr_opt call stub. We don't expect
to be making many calls using notoc stubs without pc-relative insns.
*) Which has it's own set of problems. The contents must be recreated
using the old stub layout, but .eh_frame size can affect stub
requirements so you need to temporarily keep the old .eh_frame size
when creating new stubs, then reset .eh_frame size before adding new
FDEs.
* ehframe.cc (Fde::operator==): Delete.
(Cie::remove_fde): Delete.
(Eh_frame::remove_ehframe_for_plt): Delete fde_data and fde_length
parameters. Remove all post-map plt FDEs.
* ehframe.h (Fde:post_map): Make const, add variant to compare plt.
(Fde::operator==): Delete.
(Cie::remove_fde): Implement here.
(Cie::last_fde): New accessor.
(Eh_frame::remove_ehframe_for_plt): Update prototype.
* layout.cc (Layout::remove_eh_frame_for_plt): Delete fde_data and
fde_length parameters.
* layout.h (Layout::remove_eh_frame_for_plt): Update prototype.
* powerpc.cc (Stub_table::tls_get_addr_opt_bctrl_): Delete.
(Stub_table::plt_fde_len_, plt_fde_, init_plt_fde): Delete.
(Stub_table::add_plt_call_entry): Don't set tls_get_addr_opt_bctrl_.
(eh_advance): New function.
(stub_sort): New function.
(Stub_table::add_eh_frame): Emit eh_frame for notoc plt calls and
branches as well as __tls_get_addr_opt plt call stub.
(Stub_table::remove_eh_frame): Update to suit.
Calls from notoc functions via the PLT need different stubs. Even
calls to local functions requiring a valid toc pointer must go via a
stub. This patch provides the support in gold.
elfcpp/
* powerpc.h (R_PPC64_PLTSEQ_NOTOC, R_PPC64_PLTCALL_NOTOC): Define.
gold/
* powerpc.cc (Target_powerpc::maybe_skip_tls_get_addr_call): Handle
notoc calls.
(is_branch_reloc): Template on size. Return true for REL24_NOTOC.
Update all callers.
(max_branch_delta): Likewise.
(Target_powerpc::Branch_info::make_stub): Add a stub for notoc
calls to functions needing a valid toc pointer.
(Target_powerpc::do_relax): Layout stubs again if any need resize.
(add_12_11_12, addi_12_11, addis_12_11, ldx_12_11_12, ori_12_12_0),
(oris_12_12_0, sldi_12_12_32): Define.
(Stub_table::Plt_stub_ent): Add notoc_ and iter_ fields.
(Stub_table::Branch_stub_key, Branch_stub_key_hash): Rename from
Branch_stub_ent and Branch_stub_ent hash. Remove save_res_ from key.
(Stub_table::Branch_stub_ent): New struct.
(class Stub_table): Add need_resize and resizing vars.
(Stub_table::need_resize, branch_size): New accessors.
(Stub_table::set_resizing): New function.
(Stub_table::add_plt_call_entry): Handle notoc calls and resizing
on seeing such or a tocsave stubs after a normal stub using the
same sym.
(Stub_table::add_long_branch_entry): Similarly.
(Stub_table::find_long_branch_entry): Return a Branch_stub_ent*.
(Stub_table::define_stub_syms): Adjust
(Stub_table::build_tls_opt_head, build_tls_opt_tail): New functions.
(build_notoc_offset): New function.
(Stub_table::plt_call_size): Move out of line. Handle notoc calls.
(Stub_table::branch_stub_size): Similarly.
(Stub_table::do_write): Separate loop for ELFv2 stubs, handling
notoc calls. Simplify ELFv1 loop. Output notoc branch stubs.
Use build_tls_opt_head and build_tls_opt_tail.
(Target_powerpc::Scan::get_reference_flags): Handle REL24_NOTOC.
(Target_powerpc::Scan::reloc_needs_plt_for_ifunc): Likewise,
and PLTSEQ_NOTOC and PLTCALL_NOTOC.
(Target_powerpc::Scan::local, global, relocate): Likewise.
There is a call of relocate() to perform a single relocation. In that
case the "relnum" parameter is -1U and of course it isn't appropriate
to consider any of the PowerPC code sequence optimisations triggered
by a following relocation.
* powerpc.cc (Target_powerpc::Relocate::relocate): Don't look
at next/previous reloc when relnum is -1.
This fixes a segfault when attempring to output a "linkage table
error". "object" is only non-NULL in the local symbol case.
* powerpc.cc (Stub_table::plt_error): New function.
(Stub_table::do_write): Use it.
(Output_data_glink::do_write): Don't segfault emitting linkage
table error.
These relocs have been around for quite a while. It's past time gold
supported them.
elfcpp/
* powerpc.h (R_PPC64_REL16_HIGH, R_PPC64_REL16_HIGHA),
(R_PPC64_REL16_HIGHER, R_PPC64_REL16_HIGHERA),
(R_PPC64_REL16_HIGHEST, R_PPC64_REL16_HIGHESTA): Define.
gold/
* powerpc.cc (Target_powerpc::Scan::get_reference_flags): Handle
REL16_HIGH* relocs.
(Target_powerpc::Scan::local): Likewise.
(Target_powerpc::Scan::global): Likewise.
(Target_powerpc::Relocate::relocate): Likewise.
PR gold/21066
* gc.h (gc_process_relocs): Track relocations in .eh_frame sections
when ICF is enabled, even though the .eh_frame sections themselves
are not foldable.
* icf.cc (get_section_contents): Change arguments to permit operation
on just part of a section. Include extra identity regions in the
referring section's contents recursively.
(match_sections): Lock object here instead of in get_section_contents
so that get_section_contents can operate recursively.
(Icf::add_ehframe_links): New method.
(Icf::find_identical_sections): Pass .eh_frame sections to
add_ehframe_links(). Increase default iteration count from 2 to 3
because handling exception info typically requires one extra iteration.
* icf.h (Icf::extra_identity_list_): New data member with accessor.
(is_section_foldable_candidate): Include .gcc_except_table sections.
* options.h: Update documentation for new default ICF iteration count.
* testsuite/Makefile.am (icf_test_pr21066): New test case.
* testsuite/Makefile.in: Regenerate.
* testsuite/icf_test_pr21066.cc: New source file.
* testsuite/icf_test_pr21066.sh: New test script.
2019-02-19 Egeyar Bagcioglu <egeyar.bagcioglu@oracle.com>
gold/
PR gold/23870
* aarch64.cc (Target_aarch64::Scan::global): Check if a symbol with
R_AARCH64_MOVW_.ABS_* relocations requires a PLT entry.
* testsuite/Makefile.am: Add aarch64_pr23870 test case.
* testsuite/Makefile.in: Regenerate.
* testsuite/aarch64_pr23870_bar.c: New file.
* testsuite/aarch64_pr23870_foo.c: New file.
* testsuite/aarch64_pr23870_main.S: New file.
This test checks code layout by function symbol ordering, but that
doesn't work on powerpc64 ELFv1 where the function symbol is on a
descriptor. A simple work-around is to have nm emit synthetic symbols
marking the code entry point of functions. Since the text segment is
laid out before the data segment, the synthetic symbols will have
lower addresses than function descriptor symbols and be seen first in
nm -n output.
On other targets, nm --synthetic typically emits symbols on plt
entries. Since the testcase doesn't call any of the functions of
interest there shouldn't be plt entries for those functions, so there
should be no potentially confusing extra symbols.
* testsuite/Makefile.am (keep_text_section_prefix_nm.stdout):
Pass --synthetic to nm.
* testsuite/Makefile.in: Regenerate.
PR 21128
* testsuite/icf_safe_so_test.sh (check_fold): Rewrite to check
multiple symbols at once.
(arch_specific_safe_fold): Likewise, and call with the four foo*
symbols expected to fold.
When gold fails to get an archive member, its error message doesn't
have information for
1. The failed archive member name.
2. The cause of failure: non-ELF object vs non-IR object.
This patch adds the failed archive member name and non-ELF/non-IR info
to gold error message.
* archive.cc (Archive::get_elf_object_for_member): Also print
archive member and non-ELF/non-IR info on error.
gold/
PR gold/23594
* configure.ac: Add checks for link, mkdtemp.
* configure: Regenerate.
* config.in: Regenerate.
* plugin.cc (Plugin_recorder::init): Fall back to mktemp
if mkdtemp is not available.
(link_or_copy_file): Fall back to copy if link() is not available.
The ELF compression header has a field (ch_addralign) that is set to
the alignment of the uncompressed section. This way the section itself
can have a different alignment than the decompressed section. Update
decompress_input_section to get alignment of the decompressed section
and use it when merging decompressed strings.
PR binutils/23919
* merge.cc (Output_merge_string<Char_type>::do_add_input_section):
Get addralign from decompressed_section_contents.
* object.cc (build_compressed_section_map): Set info.addralign.
(Object::decompressed_section_contents): Add a palign
argument and store p->second.addralign in *palign if it isn't
NULL.
* object.h (Compressed_section_info): Add addralign.
(section_is_compressed): Add a palign argument, default it
to NULL, store p->second.addralign in *palign if it isn't NULL.
(Object::decompressed_section_contents): Likewise.
* output.cc (Output_section::add_input_section): Get addralign
from section_is_compressed.
This test fails on powerpc64le due to the justsyms_lib being built
with exported_data at 0x2010000, apparently due to the powerpc target
code generating an empty relro .branch_lt section. Since the test
relies on the library having exported_data at 0x2000000, avoid the
problem by linking with -z norelro. Also, the test doesn't need to
avoid checking the function symbol on powerpc elfv2.
* testsuite/Makefile.am (justsyms_lib): Link with -z norelro.
* testsuite/Makefile.in: Regenerate.
* testsuite/justsyms_exec.c (main): Do check exported_func
on PowerPC64 ELFv2.
PowerPC64 ELFv2 uses the top 3 bits of st_other to encode a function's
local entry point offset from its global entry point. Allow st_other
bits except for visibility==default.
* testsuite/ver_test_14.sh: Accept objdump -T display of st_other
bits on powerpc64le.
The patch allows the gold testsuite to pass when using something like
the following configure line, which works for the rest of the binutils
testsuite. At least, it does if you don't configure your gcc with any
of the options that force a particular path to as or ld.
gccdir="/home/alan/build/gcc/prev-"
gccsrc="/home/alan/src/gcc.git"
gcctarg="x86_64-linux"
CC="${gccdir}gcc/xgcc -B${gccdir}gcc/" \
CXX="${gccdir}gcc/xg++ -B${gccdir}gcc/ -I${gccdir}$gcctarg/libstdc++-v3/include -I${gccdir}$gcctarg/libstdc++-v3/include/$gcctarg -I${gccsrc}/libstdc++-v3/libsupc++ -L${gccdir}$gcctarg/libstdc++-v3/src/.libs/" \
~/src/binutils-gdb/configure ...
gold's -Bgcctestdir/ option must come before the -B supplied by $CC
or $CXX, in order to pick up the linker we want to test. Also when
using a not-yet-installed gcc, it is necessary to provide a collect-ld
in gcctestdir/ as otherwise a collect-ld script in -B${gccdir}gcc/
will be used and the wrong linker tested.
Besides this, the patch fixes some bugs: The $COMPILE -D_FORTIFY_SOURCE
edit was wrong (but worked for usual values), and the $CXXLINK_S edit
unnecessarily but harmlessly used extra backslash quoting. See
posix shell documentation regarding quoting, or
www.gnu.org/software/bash/manual/bashref.html#Command-Substitution
Also, -Bgcctestdir/ in one place makes it less likely a new test will
be added that accidentally lacks the option.
* Makefile.am (gcctestdir1/ld): Use $@ and absolute paths.
(gcctestdir1/collect-ld): New.
(ld1_DEPENDENCIES): Add gcctestdir1/collect-ld.
(ld1_LDFLAGS): Remove -Bgcctestdir1/.
(editcc1, ld1_LINK): Define.
(gcctestdir2/ld, gcctestdir2/collect-ld, ld2_DEPENDENCIES),
(ld2_LDFLAGS, editcc2, ld2_LINK),
(ld1_r_DEPENDENCIES, ld1_r_LDFLAGS, ld1_r_LINK),
(gcctestdir2-r/ld, gcctestdir2-r/collect-ld, ld2_r_DEPENDENCIES),
(ld2_r_LDFLAGS, editcc2r, ld2_r_LINK),
(gcctestdir3/ld, gcctestdir3/collect-ld, ld3_DEPENDENCIES),
(ld3_LDFLAGS, editcc3, ld3_LINK),
(gcctestdir4/ld, gcctestdir4/collect-ld, ld4_DEPENDENCIES),
(ld4_LDFLAGS, editcc4, ld4_LINK): Similarly.
* Makefile.in: Regenerate.
* testsuite/Makefile.am (editcc): Define sed command to put
our -B option first. Remove other occurrences of -Bgcctestdir/
throughout file.
(editcc1): Define for -D_FORTIFY_SOURCE stripping.
(editcc2): Define for -static-libgcc/libstdc++ stripping.
(LINK1, CXXLINK1): Don't use CCLD or CXXLD.
(CCLD, CXXLD, COMPILE, LINK, CXXCOMPILE, CXXLINK, CXXLINK_S): Define
using editcc macros.
(gcctestdir/collect-ld): New rule, add as a dependency of..
(gcctestdir/ld): ..this. Use $@ and abs_top_buildir.
(gcctestdir/as): Use $@.
* testsuite/Makefile.in: Regenerate.
* testsuite/incremental_test.sh (actual): Match collect-ld too.
Cleans a few more test files.
* Makefile.am (MOSTLYCLEANFILES): Define.
* Makefile.in: Regnerate.
* testsuite/Makefile.am (MOSTLYCLEANFILES): Add ver_test_14 and
gnu_property_test.
* testsuite/Makefile.in: Regnerate.
gold/
* target.h (Sized_target::record_gnu_property): Change first two
parameters to unsigned int.
* x86_64.cc (Target_x86_64::record_gnu_property): Likewise.
gold * layout.cc (section_name_mapping): Add an entry for
.gnu.build.attributes.
ld * scripttempl/elf.sc: Place .gnu.build.attributes sections with
other read-only sections.
When an .eh_frame section has deferred layout because of plugins, gold
was neglecting to mark the section as deferred. When we later processed
the corresponding relocation section, we were then ignoring it, causing
the internal error later on in the link.
gold/
PR gold/23397
* object.cc (Sized_relobj_file::do_layout): Mark section as deferred.
* testsuite/Makefile.am (plugin_test_1): Add --emit-relocs option to
existing test case.
* testsuite/Makefile.in: Regenerate.
When generating _end, _edata, etc. symbols, and a version script provides
a version name, and we are linking against another shared library that
provides those symbols with a different version, gold ends up trying to
resolve the other shared library's symbols to the new definitions, resulting
in two copies of each symbol, one as default, and one as non-default.
This patch tests for that condition, and ignores the symbols provided
by the other shared library.
gold/
PR gold/23409
* symtab.cc (Symbol_table::define_special_symbol): Add check for
version name on existing symbol.
* testsuite/Makefile.am (ver_test_pr23409): New test case.
* testsuite/Makefile.in: Regenerate.
* testsuite/ver_test_pr23409.sh: New test script.
* testsuite/ver_test_pr23409_1.script: New version script.
* testsuite/ver_test_pr23409_2.script: New version script.
I just stumbled over this with 2.29.1 while building a cross-toolchain, on Cygwin64, but it's still the same for 2.30. m.arena has size_t on Cygwin64 and thus errors out due to -Werror=format.
gold * main.cc: Print m.arena as long long.
Testing for the GCC version 5 or later isn't right, since C++ 11 support
wasn't enabled by default until later. This patch tests the C++ standard
support directly instead of inferring it from the GCC version.
gold/
* incremental.cc (Sized_incremental_binary::setup_readers): Use
emplace_back for C++ 11 or later.