Mostly some whitespace changes to make things a bit more consistent.
gdb/ChangeLog:
* Makefile.in: Fix whitespace formatting.
gdb/gdbserver/ChangeLog:
* Makefile.in: Fix whitespace formatting.
I find the big file lists in the Makefiles a bit ugly and not very
practical. Since there are multiple filenames on each line (as much as
fits in 80 columns), it's not easy to add, remove or change a name in
the middle. As a result, we have a mix of long and short lines in no
particular order (ALL_TARGET_OBS is a good example).
I therefore suggest flattening the lists (one name per line) and keeping
them in alphabetical order. The diffs will be much clearer and merge
conflicts will be easier to resolve.
A nice (IMO) side-effect I observed is that the files are compiled
alphabetically by make, so it gives a rough idea of the progress of the
build.
I added a comment in gdb/Makefile.in to mention to keep the file lists
ordered, and gave the general guidelines on what order to respect. I
added a comment in other Makefiles which refers to gdb/Makefile.in, to
avoid duplication.
Running the patch through the buildbot found that gdb.base/default.exp
started to fail. The languages in the error message shown when typing
"set language" have changed order. We could probably improve gdb so
that it prints them in a stable order, regardless of the order of the
object list passed to the linked, but just fixing the test is easier for
now.
New in v2:
- Change ordering style, directories go at the end.
- Cleanup gdbserver's and data-directory's Makefile as well.
- Add comments at top of Makefiles about the ordering.
- Remove wrong trailing backslahes.
- Fix test gdb.base/default.exp.
gdb/ChangeLog:
* Makefile.in: Add comment about file lists ordering.
(SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_MI_OBS, SUBDIR_MI_SRCS,
SUBDIR_TUI_OBS, SUBDIR_TUI_SRCS, SUBDIR_GCC_COMPILE_OBS,
SUBDIR_GCC_COMPILE_SRCS, SUBDIR_GUILE_OBS, SUBDIR_GUILE_SRCS,
SUBDIR_PYTHON_OBS, SUBDIR_PYTHON_SRCS, SUBDIR_GDBTK_OBS,
SUBDIR_GDBTK_SRCS, XMLFILES, REMOTE_OBS, ALL_64_TARGET_OBS,
ALL_TARGET_OBS, SFILES, HFILES_NO_SRCDIR, HFILES_WITH_SRCDIR,
COMMON_OBS, YYFILES, YYOBJ, generated_files, ALLDEPFILES):
Flatten list and order alphabetically.
* data-directory/Makefile.in: Add comment about file lists
ordering.
(GEN_SYSCALLS_FILES, PYTHON_FILE_LIST): Flatten list and order
alphabetically.
gdb/gdbserver/ChangeLog:
* Makefile.in (SFILES, OBS): Flatten list and order
alphabetically.
gdb/testsuite/ChangeLog:
* gdb.base/default.exp: Fix output of "set language".
PR ld/20815
bfd * elf.c (elf_modify_segment_map): Allow empty LOAD segments if
they contain the program headers.
(_bfd_elf_map_sections_to_segments): If the linker created the
PHDR segment then always attempt to include it in a LOAD segment.
(assign_file_positions_for_non_load_sections): Allow LOAD segments
to overlap PHDR segments.
(phdr_sorter): New function. Sorts program headers.
(assign_file_positions_except_relocs): Sort the program headers
before writing them out. Issue an error if the PHDR segment is
not covered by a LOAD segment, unless the backend allows it.
* elf-bfd.h (struct elf_backend_data): Add
elf_backend_allow_non_load_phdr.
* elfxx-target.h (elf_backend_allow_non_load_phdr): Provide
default definition that returns FALSE.
(elfNN_bed): Initialise the elf_backend_allow_non_load_phdr
field.
* elf64-hppa.c (elf64_hppa_allow_non_load_phdr): New function.
Returns TRUE.
(elf_backend_allow_non_load_phdr): Define.
* elf-m10300.c (_bfd_mn10300_elf_size_dynamic_sections): Do not
place the interpreter string into the .interp section if the
nointerp flag is set in the link info structure.
* elf32-arc.c (elf_arc_size_dynamic_sections): Likewise.
* elf32-score7.c (score_elf_final_link_relocate): Allow for the
_gp symbol not being part of the output.
binutils* readelf.c (process_program_headers): Check PT_LOAD and PT_PHDR
segments for validity.
ld * ld.texinfo: Note that PT_TLS can be used as a segment type.
* testsuite/ld-discard/discard.ld: Add space for program headers.
* testsuite/ld-elf/flags1.ld: Likewise.
* testsuite/ld-elf/maxpage3.t: Likewise.
* testsuite/ld-elf/noload-1.t: Likewise.
* testsuite/ld-elf/orphan.ld: Likewise.
* testsuite/ld-elf/overlay.t: Likewise.
* testsuite/ld-elf/pr14052.t: Likewise.
* testsuite/ld-elf/pr19539.t: Likewise.
* testsuite/ld-elf/provide-hidden-1.ld: Likewise.
* testsuite/ld-elf/provide-hidden-s.ld: Likewise.
* testsuite/ld-elf/weak-dyn-1.ld: Likewise.
* testsuite/ld-i386/pr19539.t: Likewise.
* testsuite/ld-scripts/defined.t: Likewise.
* testsuite/ld-scripts/defined6.t: Likewise.
* testsuite/ld-scripts/dynamic-sections.t: Likewise.
* testsuite/ld-scripts/empty-aligned.t: Likewise.
* testsuite/ld-scripts/provide-2.t: Likewise.
* testsuite/ld-scripts/provide-4.t: Likewise.
* testsuite/ld-vax-elf/plt-local.ld: Likewise.
* testsuite/ld-x86-64/pr19539.t: Likewise.
* testsuite/ld-elf/ehdr_start-missing.d: Do not initialise the
dynamic linker.
* testsuite/ld-elf/ehdr_start-weak.d: Likewise.
* testsuite/ld-elf/elf.exp (pr14170, pr17068): Likewise.
* testsuite/ld-elf/loadaddr1.d: Update expected readelf output.
* testsuite/ld-elf/noload-2.d: Likewise.
* testsuite/ld-powerpc/vxworks2.sd: Likewise.
* testsuite/ld-scripts/phdrs3a.d: Likewise.
* testsuite/ld-scripts/size-2.d: Likewise.
* testsuite/ld-elf/group.ld: Add program headers.
* testsuite/ld-elf/overlay.d: Skip for SPU.
* testsuite/ld-elf/flags1.d: Skip for RX.
* testsuite/ld-elf/pr19162.d: Skip for HPPA64.
* testsuite/ld-elf/pr19539.d: Skip for ALPHA.
* testsuite/ld-scripts/empty-orphan.t: Update program headers.
* testsuite/ld-scripts/size-2.t: Likewise.
gas/ChangeLog:
2016-11-23 Jose E. Marchesi <jose.marchesi@oracle.com>
* testsuite/gas/sparc/sparc.exp (gas_64_check): Make sure the
hwcaps-bump test is run with 64-bit objects.
gold/
PR gold/20346
* options.cc (One_option::print): Print "(default)" when appropriate.
* options.h: Clean up and re-sort options.
(One_option::is_default): New data member.
(One_option::One_option): Add is_default parameter; adjust all calls.
(DEFINE_var): Add is_default__ parameter; adjust all calls.
(DEFINE_bool): Set is_default based on default_value__.
(DEFINE_bool_ignore): New macro.
(--no-eh-frame-hdr): New option.
(--enable-new-dtags): Remove mention of DT_FLAGS.
Use regcache in software_single_step.
gdb:
2016-11-22 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (aarch64_software_single_step): Call
get_regcache_arch instead of get_frame_arch. Call
regcache_read_pc instead of get_frame_pc.
This patch adds a new regcache api regcache_raw_get_signed.
gdb:
2016-11-22 Yao Qi <yao.qi@linaro.org>
* regcache.c (regcache_raw_get_signed): New function.
* regcache.h (regcache_raw_get_signed): Declare.
When the assembler finds an instruction which is part of a higher
opcode architecture it bumps the current opcode architecture. For
example:
$ echo "mwait" | as -bump
{standard input}: Assembler messages:
{standard input}:1: Warning: architecture bumped from "v6" to "v9m" on "mwait"
However, when two instructions pertaining to the same opcode
architecture but associated to different SPARC hardware capabilities
are found in the input stream, and no GAS architecture is specified in
the command line, the assembler bangs:
$ echo "mwait; wr %g0,%g1,%mcdper" | as -bump
{standard input}: Assembler messages:
{standard input}:1: Warning: architecture bumped from "v6" to "v9m" on "mwait"
{standard input}:1: Error: Hardware capability "sparc5" not enabled for "wr".
... and it should'nt, as WRMCDPER pertains to the same architecture
level than MWAIT.
This patch fixes this by extending the definition of sparc opcode
architectures to contain a set of hardware capabilities and making the
assembler to take these capabilities into account when updating the
set of allowed hwcaps when an architecture bump is triggered by some
instruction.
This way, hwcaps associated to architecture levels are maintained in
opcodes, while the assembler keeps the flexibiity of defining GAS
architectures including additional hwcaps (like -Asparcfmaf or the
v8plus* variants).
A test covering this failure case is included.
gas/ChangeLog:
2016-11-22 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/tc-sparc.c: Move HWS_* and HWS2_* definitions to
opcodes/sparc-opc.c.
(sparc_arch): Clarify the new role of the hwcap_allowed and
hwcap2_allowed fields.
(sparc_arch_table): Remove HWS_* and HWS2_* instances from
hwcap_allowed and hwcap2_allowed respectively.
(md_parse_option): Include the opcode arch hwcaps when processing
-A.
(sparc_ip): Use the current opcode arch hwcaps to update
hwcap_allowed, as well of the hwcaps of the instruction triggering
the bump.
* testsuite/gas/sparc/hwcaps-bump.s: New file.
* testsuite/gas/sparc/hwcaps-bump.l: Likewise.
* testsuite/gas/sparc/sparc.exp (gas_64_check): Run tests in
hwcaps-bump.
include/ChangeLog:
2016-11-22 Jose E. Marchesi <jose.marchesi@oracle.com>
* opcode/sparc.h (sparc_opcode_arch): New fields hwcaps and
hwcaps2.
opcodes/ChangeLog:
2016-11-22 Jose E. Marchesi <jose.marchesi@oracle.com>
* sparc-opc.c (HWS_V8): Definition moved from
gas/config/tc-sparc.c.
(HWS_V9): Likewise.
(HWS_VA): Likewise.
(HWS_VB): Likewise.
(HWS_VC): Likewise.
(HWS_VD): Likewise.
(HWS_VE): Likewise.
(HWS_VV): Likewise.
(HWS_VM): Likewise.
(HWS2_VM): Likewise.
(sparc_opcode_archs): Initialize hwcaps and hwcaps2 fields of
existing entries.
It makes just a little more sense to use input_bfd when retrieving
insns for relocation, since the relocations match the endianness of
the input bfd.
* elf32-ppc.c (ppc64_elf_relocate_section): Calculate d_offset for
input_bfd. Replace occurrences of output_bfd as bfd_get_32 and
bfd_put_32 param with input_bfd.
* elf32-ppc.c (ppc_elf_relocate_section): Likewise. Also
ppc_elf_vle_split16 param.
(ppc_elf_vle_split16): Rename output_bfd param to input_bfd.
We renamed VALUE_FRAME_ID to VALUE_NEXT_FRAME_ID recently,
https://sourceware.org/ml/gdb-patches/2016-11/msg00018.html
and we should use VALUE_NEXT_FRAME_ID in value_from_component
too.
gdb:
2016-11-22 Yao Qi <yao.qi@linaro.org>
* value.c (value_from_component): Use VALUE_NEXT_FRAME_ID
instead of VALUE_FROM_ID.
A little oversight from my part, it caused the Makefile not to track
the dependencies from mi/*.c files.
gdb/ChangeLog:
* Makefile.in (%o: $(srcdir)/mi/%.c): Add missing POSTCOMPILE
step.
2016-11-21 Igor Kudrin <ikudrin@accesssoftek.com>
gold/
* layout.cc: Include windows.h and rpcdce.h (for MinGW32).
(Layout::create_build_id): Generate uuid using UuidCreate().
Fix a commit 089e3718bd ("Greatly improve the speed if looking up
DWARF line number information.") build regression:
cc1: warnings being treated as errors
.../bfd/dwarf2.c: In function 'build_line_info_table':
.../bfd/dwarf2.c:1614: warning: declaration of 'index' shadows a global declaration
/usr/include/string.h:304: warning: shadowed declaration is here
.../bfd/dwarf2.c: In function 'build_lookup_funcinfo_table':
.../bfd/dwarf2.c:2262: warning: declaration of 'index' shadows a global declaration
/usr/include/string.h:304: warning: shadowed declaration is here
make[4]: *** [dwarf2.lo] Error 1
in a way following commit 91d6fa6a03 ("Add -Wshadow to the gcc command
line options used when compiling the binutils.").
bfd/
* dwarf2.c (build_line_info_table): Rename `index' local
variable to `line_index'.
(build_lookup_funcinfo_table): Rename `index' local variable to
`func_index'.
Nowadays, we create a value of subobject in pretty printer with 'address'
being used,
value = value_from_contents_and_address (type, valaddr + embedded_offset,
address + embedded_offset);
set_value_component_location (value, val);
/* set_value_component_location resets the address, so we may
need to set it again. */
if (VALUE_LVAL (value) != lval_internalvar
&& VALUE_LVAL (value) != lval_internalvar_component
&& VALUE_LVAL (value) != lval_computed)
set_value_address (value, address + embedded_offset);
value_from_contents_and_address creates a value from memory, but the
value we are pretty-printing may not from memory at all.
Instead of using value_from_contents_and_address, we create a value
of subobject with the same location as object's but different offset.
We avoid using address in this way. As a result, parameter 'address'
in apply_val_pretty_printer is no longer needed, we can remove it in
next step.
We've already had the location of the 'whole' value, so it is safe
to assume we can create a value of 'component' or 'suboject' value
at the same location but with different offset.
gdb:
2016-11-21 Yao Qi <yao.qi@linaro.org>
* guile/scm-pretty-print.c (gdbscm_apply_val_pretty_printer):
Don't call value_from_contents_and_address and
set_value_address. Call value_from_component.
* python/py-prettyprint.c (gdbpy_apply_val_pretty_printer):
Likewise.
* value.c (value_from_component): New function.
* value.h (value_from_component): Likewise.
* valarith.c (value_subscripted_rvalue): Call
value_from_component.
We shouldn't be using these, since their output goes straight to
stdout, which doesn't allow redirection. So this patch updates
the ARI to detect any such use.
gdb/ChangeLog:
* contrib/ari/gdb_ari.sh: Add detection of printf_vma and
sprintf_vma.
This reverts commit b19753ce31.
As it turns out, GCC (and the assembler) needs additional work in
order to support negative GOT offsets in 64-bit sparc. This is
breaking TLS Local Dynamic in position-independent code.
gas/
2016-11-18 Claudiu Zissulescu <claziss@synopsys.com>
* testsuite/gas/arc/cl-warn.s: New file.
* testsuite/gas/arc/cpu-pseudop-1.d: Likewise.
* testsuite/gas/arc/cpu-pseudop-1.s: Likewise.
* testsuite/gas/arc/cpu-pseudop-2.d: Likewise.
* testsuite/gas/arc/cpu-pseudop-2.s: Likewise.
* testsuite/gas/arc/cpu-warn2.s: Likewise.
* config/tc-arc.c (selected_cpu): Initialize.
(feature_type): New struct.
(feature_list): New variable.
(arc_check_feature): New function.
(arc_select_cpu): Check for .cpu duplicates. Don't overwrite the
current cpu features. Check if a feature is available for a given
cpu.
(md_parse_option): Test if features are available for a given cpu.
bfd/ChangeLog:
2016-11-18 James Clarke <jrtc27@jrtc27.com>
* elfxx-sparc.c (_bfd_sparc_elf_relocate_section): Don't convert
R_SPARC_GOTDATA_OP_HIX22 and R_SPARC_GOTDATA_OP_LOX10 to
R_SPARC_GOT* for non-local references. Instead, treat them like
R_SPARC_GOTDATA_HIX22/R_SPARC_GOTDATA_LOX10 when filling in the
immediate with the calculated relocation.
