This patch fixes the typo "uf" in the comment. I'll push it in as the
change is obvious.
2016-06-30 Yao Qi <yao.qi@linaro.org>
* arm-dis.c (print_insn): Fix typo in comment.
Fix an assertion failure like:
test.s: Assembler messages:
test.s:3: Internal error!
Assertion failure in append_insn at .../gas/config/tc-mips.c:7523.
Please report this bug.
triggered by assembling MIPS16 code like:
hello:
addiu $4, $4, 4
jr $31
with the generation of a listing file enabled, e.g.:
$ as -mips16 -O2 -aln=test.lst
The cause of the problem is the lack of support for moving instructions
across frags in MIPS16 jump swapping, which triggers more easily with
listing enabled as in that case every instruction gets placed in its own
frag. It would trigger even with listing disabled though if the
instruction to swap a MIPS16 jump with was unfortunately enough placed
as last in a frag that became full.
This scenario is already handled correctly with branch swapping in
regular MIPS and microMIPS code, so reuse it for MIPS16 code as well,
and now that all MIPS16 handling has become the same as the regular MIPS
and microMIPS cases remove MIPS16 special casing altogether.
This effectively complements:
commit 464ab0e55a
Author: Maciej W. Rozycki <macro@linux-mips.org>
Date: Mon Aug 6 20:33:00 2012 +0000
<https://sourceware.org/ml/binutils/2012-08/msg00043.html>, ("MIPS/GAS:
Correct microMIPS branch swapping assertion") for the MIPS16 case.
The assertion itself was introduced with:
commit 1e91584932
Author: Richard Sandiford <rdsandiford@googlemail.com>
Date: Wed Mar 9 09:17:02 2005 +0000
<https://sourceware.org/ml/binutils/2005-03/msg00217.html>, ("Rework
MIPS nop-insertion code, add -mfix-vr4130 [5/11]"), but its introduction
merely noted our existing lack of support for MIPS16 jump swapping
across frags.
gas/
* config/tc-mips.c (append_insn) <APPEND_SWAP>: Do not special
case MIPS16 handling.
* testsuite/gas/mips/branch-swap-3.d: New test.
* testsuite/gas/mips/branch-swap-4.d: New test.
* testsuite/gas/mips/mips16@branch-swap-3.d: New test.
* testsuite/gas/mips/mips16@branch-swap-4.d: New test.
* testsuite/gas/mips/micromips@branch-swap-3.d: New test.
* testsuite/gas/mips/micromips@branch-swap-4.d: New test.
* testsuite/gas/mips/branch-swap-3.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
Simplify non-MIPS16 branch swapping by copying the MIPS16 variant, which
sets the new position for the current instruction first and reduces the
calculation of the new position of the previous instruction. Also refer
to previous instruction's frag and position via `delay' for consistency.
Reintroduce an explanatory comment, updated, previously removed with:
commit 1e91584932
Author: Richard Sandiford <rdsandiford@googlemail.com>
Date: Wed Mar 9 09:17:02 2005 +0000
<https://sourceware.org/ml/binutils/2005-03/msg00217.html>, ("Rework
MIPS nop-insertion code, add -mfix-vr4130 [5/11]").
gas/
* config/tc-mips.c (append_insn): Simplify non-MIPS16 branch
swapping sequence.
Correct a regression from commit 85024cd8bc ("Run write_object_file
after errors") causing unsuccessful assembly, which may be due to any
reason, such as supplying a valid source like this:
.text
.byte 0
.err
to terminate with an assertion failure like:
test.s: Assembler messages:
test.s:3: Error: .err encountered
../as-new: BFD (GNU Binutils) 2.24.51.20140628 internal error, aborting at .../gas/write.c line 608 in size_seg
../as-new: Please report this bug.
on targets whose default text section alignment is above 0, typically
RISC machines.
This is due to an attempt to set last text section's frag alignment to
0, requested from `subsegs_finish_section' where `frag_align_code
(alignment, 0)' is called with `alignment' set to 0 rather than the
section alignment if `had_errors' has returned true. The call to
`subsegs_finish_section' is made from `subsegs_finish' from
`write_object_file' at unsuccessful completion, which previously wasn't
made.
Always set last section's frag alignment from the section alignment
then, forcing no section padding instead if completing unsuccessfully,
so that in that case alignment padding is still suppressed from any
listing generated, fixing assertion failures for these targets:
alpha-linuxecoff -FAIL: all pr20312
arm-aout -FAIL: all pr20312
mips-freebsd -FAIL: all pr20312
mips-img-linux -FAIL: all pr20312
mips-linux -FAIL: all pr20312
mips-mti-linux -FAIL: all pr20312
mips-netbsd -FAIL: all pr20312
mips-sgi-irix5 -FAIL: all pr20312
mips-sgi-irix6 -FAIL: all pr20312
mips-vxworks -FAIL: all pr20312
mips64-freebsd -FAIL: all pr20312
mips64-img-linux -FAIL: all pr20312
mips64-linux -FAIL: all pr20312
mips64-mti-linux -FAIL: all pr20312
mips64-openbsd -FAIL: all pr20312
mips64el-freebsd -FAIL: all pr20312
mips64el-img-linux -FAIL: all pr20312
mips64el-linux -FAIL: all pr20312
mips64el-mti-linux -FAIL: all pr20312
mips64el-openbsd -FAIL: all pr20312
mipsel-freebsd -FAIL: all pr20312
mipsel-img-linux -FAIL: all pr20312
mipsel-linux -FAIL: all pr20312
mipsel-mti-linux -FAIL: all pr20312
mipsel-netbsd -FAIL: all pr20312
mipsel-vxworks -FAIL: all pr20312
mipsisa32-linux -FAIL: all pr20312
mipsisa32el-linux -FAIL: all pr20312
mipsisa64-linux -FAIL: all pr20312
mipsisa64el-linux -FAIL: all pr20312
sh-pe -FAIL: all pr20312
sparc-aout -FAIL: all pr20312
gas/
PR gas/20312
* write.c (subsegs_finish_section): Force no section padding to
alignment on failed assembly, always set last frag's alignment
from section.
* testsuite/gas/all/pr20312.l: New list test.
* testsuite/gas/all/pr20312.s: New test source.
* testsuite/gas/all/gas.exp: Run the new test
Commit 51f77c3704 ("Add testing infrastruture bits for running with
MI on a separate UI") broke MI testing with native-gdbserver:
$ make check RUNTESTFLAGS="--target_board=native-gdbserver mi-var-child.exp"
...
Running .../src/binutils-gdb/gdb/testsuite/gdb.mi/mi-var-child.exp ...
can't unset "inferior_spawn_id": no such variable
while executing
"unset inferior_spawn_id"
(procedure "close_gdbserver" line 20)
invoked from within
"close_gdbserver"
...
When testing with gdbserver, gdb_exit is overridden with a special
version that calls close_gdbserver, which clears inferior_spawn_id.
The problem is that the commit mentioned above made
gdb_exit/mi_gdb_exit clear inferior_spawn_id too, and clearing a
non-existing variable is a tcl error.
Since gdb_exit/mi_gdb_exit always clears inferior_spawn_id now, the
fix is simply to stop clearing it in close_gdbserver.
gdb/testsuite/
2016-06-30 Pedro Alves <palves@redhat.com>
* lib/gdbserver-support.exp (close_gdbserver, gdb_exit): Don't
unset inferior_spawn_id.
Runing the whole gdb testsuite with MI on a separate tty, with:
make check RUNTESTFLAGS="FORCE_SEPARATE_MI_TTY=1"
Doesn't actually work because commit 51f77c3704 ("Add testing
infrastruture bits for running with MI on a separate UI") included a
last-minute rename typo, now fixed with this commit.
gdb/testsuite/ChangeLog:
2016-06-30 Pedro Alves <palves@redhat.com>
* lib/mi-support.exp (default_mi_gdb_start): Declare global
FORCE_SEPARATE_MI_TTY, not SEPARATE_MI_TTY.
GAS fails to recognize march=armv8.2-a as a superset of march=armv8.1-a
when assembling NEON instructions. The patch corrects this, making
-march=armv8.2-a -mfpu=neon-fp-armv8 enable the NEON intructions
introduced with ARMv8.1-A.
include/
2016-06-30 Matthew Wahab <matthew.wahab@arm.com>
* opcode/arm.h (ARM_ARCH_V8_2a): Add FPU_NEON_EXT_RDMA to the set
of enabled FPU features.
gas/
2016-06-30 Matthew Wahab <matthew.wahab@arm.com>
* testsuite/gas/arm/armv8_2+rdma.d: New.
* cpustate.h: Include config.h.
(union GRegisterValue): Add WORDS_BIGENDIAN check. For big endian code
use anonymous structs to align members.
* simulator.c (aarch64_step): Use sim_core_read_buffer and
endian_le2h_4 to read instruction from pc.
With GCC 6 when not using -static-libstdc++, the operator delete(void*)
function is defined in the shared C++ support library, rather than in
the main program. The test script is too aggressive in checking for
this symbol's presence among the exported symbols. This patch removes
the check for that symbol.
gold/
PR gold/20310
* testsuite/dynamic_list.sh: Remove check for _ZdlPv.
--enable-compressed-debug-sections=gas added to binutils 2.26. Make it
default for Linux/x86 targets in 2.27.
* NEWS: Mention --enable-compressed-debug-sections=gas is the
default for Linux/x86 targets.
* configure.tgt (ac_default_compressed_debug_sections): Default
to yes for Linux/x86 targets.
PR python/20129 concerns the error message one gets from a command
like "disable frame-filter global NoSuchFilter". Currently this
throws a second, unexpected, exception due to the use of a
non-existing variable named "name".
This patch adds regression tests and fixes a couple of spots to use
the correct variable name.
Built and regtested on x86-64 Fedora 23.
2016-06-29 Tom Tromey <tom@tromey.com>
PR python/20129:
* python/lib/gdb/command/frame_filters.py (_do_enable_frame_filter)
(SetFrameFilterPriority._set_filter_priority): Use "frame_filter",
not "name".
2016-06-29 Tom Tromey <tom@tromey.com>
PR python/20129:
* gdb.python/py-framefilter.exp: Add tests for setting priority
and disabling of non-existent frame filter.
PR gdb/17210 concerns a possible memory leak in read_memory_robust.
The bug can happen because read_memory_robust allocates memory, does
not install any cleanups, and invokes QUIT. Similarly, target_read
calls QUIT, so it too can potentially throw.
The fix is to install cleanups to guard the allocated memory.
Built and regtested on x86-64 Fedora 23. I couldn't think of a way to
test this, so no new test; and of course this means it should have
more careful review.
2016-06-29 Tom Tromey <tom@tromey.com>
PR gdb/17210:
* target.c (free_memory_read_result_vector): Take a pointer to the
VEC as an argument.
(read_memory_robust): Install a cleanup for "result".
* mi/mi-main.c (mi_cmd_data_read_memory_bytes): Update.
There are extensions to 386 psABI:
https://groups.google.com/forum/#!topic/ia32-abi/awsRSvJOJfs
to call tls_get_addr via GOT:
call *___tls_get_addr@GOT(%reg)
where EBX register isn't required as GOT base.
Since direct call is 4-byte long and indirect call, is 5-byte long, the
extra one byte must be handled properly.
For general dynamic model, 7-byte lea instruction before call
instruction is replaced by 6-byte one to make room for indirect call.
For local dynamic model, we simply use 5-byte indirect call.
TLS linker optimization is updated to recognize new instruction
patterns. For local dynamic model to local exec model transition,
we generate a 6-byte lea instruction as nop, instead of a 1-byte nop
plus a 4-byte lea instruction.
PR gold/20308
* i386.cc (Target_i386::Relocate::relocate): Allow
R_386_GOT32X relocation against ___tls_get_addr.
(Target_i386::Relocate::tls_gd_to_ie): Support indirect
call to __tls_get_addr.
(Target_i386::Relocate::tls_gd_to_le): Likewise.
(Target_i386::Relocate::tls_ld_to_le): Likewise.
* testsuite/Makefile.am (check_PROGRAMS): Add pr20308a_test,
pr20308b_test, pr20308c_test, pr20308d_test, pr20308e_test.
(pr20308a_test_SOURCES): New.
(pr20308a_test_DEPENDENCIES): Likewise.
(pr20308a_test_CFLAGS): Likewise.
(pr20308a_test_LDFLAGS): Likewise.
(pr20308a_test_LDADD): Likewise.
(pr20308b_test_SOURCES): Likewise.
(pr20308b_test_DEPENDENCIES): Likewise.
(pr20308b_test_CFLAGS): Likewise.
(pr20308b_test_LDFLAGS): Likewise.
(pr20308b_test_LDADD): Likewise.
(pr20308c_test_SOURCES): Likewise.
(pr20308c_test_DEPENDENCIES): Likewise.
(pr20308c_test_CFLAGS): Likewise.
(pr20308c_test_LDFLAGS): Likewise.
(pr20308c_test_LDADD): Likewise.
(pr20308d_test_SOURCES): Likewise.
(pr20308d_test_DEPENDENCIES): Likewise.
(pr20308d_test_CFLAGS): Likewise.
(pr20308d_test_LDFLAGS): Likewise.
(pr20308d_test_LDADD): Likewise.
(pr20308e_test_SOURCES): Likewise.
(pr20308e_test_DEPENDENCIES): Likewise.
(pr20308e_test_CFLAGS): Likewise.
(pr20308e_test_LDFLAGS): Likewise.
(pr20308e_test_LDADD): Likewise.
(pr20308a.so): Likewise.
(pr20308b.so): Likewise.
(pr20308_gd.o): Likewise.
(pr20308_ld.o): Likewise.
(MOSTLYCLEANFILES): Add pr20308a.so pr20308b.so.
* testsuite/Makefile.in: Regenerated.
* testsuite/pr20308_def.c: New file.
* testsuite/pr20308_gd.S: Likewise.
* testsuite/pr20308_ld.S: Likewise.
* testsuite/pr20308_main.c: Likewise.
There are extensions to x86-64 psABI:
https://groups.google.com/forum/#!topic/x86-64-abi/de5_KnLHxtI
to call tls_get_addr via GOT:
call *__tls_get_addr@GOTPCREL(%rip)
Since direct call is 4-byte long and indirect call, is 5-byte long, the
extra one byte must be handled properly.
For general dynamic model, one 0x66 prefix before call instruction is
removed to make room for indirect call. For local dynamic model, we
simply use 5-byte indirect call.
TLS linker optimization is updated to recognize new instruction
patterns. For local dynamic model to local exec model transition, we
generate 4 0x66 prefixes, instead of 3, before mov instruction in 64-bit
and generate a 5-byte nop, instead of 4-byte, before mov instruction in
32-bit.
PR gold/20216
* configure.ac (DEFAULT_TARGET_X86_64_OR_X32): New
AM_CONDITIONAL.
* configure: Regenerated.
* x86_64.cc (Target_x86_64<size>::Relocate::relocate): Allow
R_X86_64_GOTPCRELX relocation against __tls_get_addr.
(Target_x86_64<size>::Relocate::tls_gd_to_ie): Support indirect
call to __tls_get_addr.
(Target_x86_64<size>::Relocate::tls_gd_to_le): Likewise.
(Target_x86_64<size>::Relocate::tls_ld_to_le): Likewise.
* testsuite/Makefile.am (check_PROGRAMS): Add pr20216a_test,
pr20216b_test, pr20216c_test, pr20216d_test, pr20216e_test.
(pr20216a_test_SOURCES): New.
(pr20216a_test_DEPENDENCIES): Likewise.
(pr20216a_test_CFLAGS): Likewise.
(pr20216a_test_LDFLAGS): Likewise.
(pr20216a_test_LDADD): Likewise.
(pr20216b_test_SOURCES): Likewise.
(pr20216b_test_DEPENDENCIES): Likewise.
(pr20216b_test_CFLAGS): Likewise.
(pr20216b_test_LDFLAGS): Likewise.
(pr20216b_test_LDADD): Likewise.
(pr20216c_test_SOURCES): Likewise.
(pr20216c_test_DEPENDENCIES): Likewise.
(pr20216c_test_CFLAGS): Likewise.
(pr20216c_test_LDFLAGS): Likewise.
(pr20216c_test_LDADD): Likewise.
(pr20216d_test_SOURCES): Likewise.
(pr20216d_test_DEPENDENCIES): Likewise.
(pr20216d_test_CFLAGS): Likewise.
(pr20216d_test_LDFLAGS): Likewise.
(pr20216d_test_LDADD): Likewise.
(pr20216e_test_SOURCES): Likewise.
(pr20216e_test_DEPENDENCIES): Likewise.
(pr20216e_test_CFLAGS): Likewise.
(pr20216e_test_LDFLAGS): Likewise.
(pr20216e_test_LDADD): Likewise.
(pr20216a.so): Likewise.
(pr20216b.so): Likewise.
(pr20216_gd.o): Likewise.
(pr20216_ld.o): Likewise.
(MOSTLYCLEANFILES): Add pr20216a.so pr20216b.so.
* testsuite/Makefile.in: Regenerated.
* testsuite/pr20216_def.c: New file.
* testsuite/pr20216_gd.S: Likewise.
* testsuite/pr20216_ld.S: Likewise.
* testsuite/pr20216_main.c: Likewise.
Building gdb with --enable-build-with-cxx=no trips on a warning:
../../binutils-gdb/gdb/rust-lang.c:173:15: error: saveptr may be used
uninitialized in this function [-Werror=maybe-uninitialized]
ret.name = concat (TYPE_NAME (type), "::", token, (char *) NULL);
The problem is that gcc doesn't understand that "tail" can never be
NULL in the call to strtok_r:
name = xstrdup (TYPE_FIELD_NAME (type, 0));
cleanup = make_cleanup (xfree, name);
tail = name + strlen (RUST_ENUM_PREFIX);
...
for (token = strtok_r (tail, "$", &saveptr);
Fix this by always initializing saveptr.
2016-06-29 Manish Goregaokar <manish@mozilla.com>
gdb/ChangeLog:
* rust-lang.c (rust_get_disr_info): Initialize saveptr to NULL.
Currently, we use 123456789 as unknown or illegal syscall number, and
expect program return ENOSYS. Although 123456789 is an illegal syscall
number on arm linux, kernel sends SIGILL rather than returns -ENOSYS.
However, arm linux kernel returns -ENOSYS if syscall number is within
0xf0001..0xf07ff, so we can use 0xf07ff for unknown_syscall in test.
gdb/testsuite:
2016-06-29 Yao Qi <yao.qi@linaro.org>
* gdb.base/catch-syscall.c [__arm__]: Set unknown_syscall to
0x0f07ff.
bfd * elfnn-aarch64.c (is_aarch64_mapping_symbol): New function.
Returns TRUE for AArch64 mapping symbols.
(elfNN_aarch64_backend_symbol_processing): New function. Marks
mapping symbols as precious in object files so that they will not
be stripped.
(elf_backend_symbol_processing): Define.
* elf32-arm.c (is_arm_mapping_symbol): New function. Returns TRUE
for ARM mapping symbols.
(elf32_arm_backend_symbol_processing): Make use of the new function.
Remove an internal diagnostic regression introduced with the inclusion of
"libbfd.h" from write.c, added with:
commit e7ff5c732e
Author: Alan Modra <amodra@gmail.com>
Date: Fri Feb 16 03:40:17 2007 +0000
That change made "libbfd.h" override the `abort' definition provided by
"as.h" earlier on, making the message produced by any calls reached from
write.c, which is a part of the GAS proper, look like they came from
BFD, e.g.:
.../gas/testsuite/gas/elf/type.s: Assembler messages:
.../gas/testsuite/gas/elf/type.s:30: Error: symbol type "gnu_unique_object" is supported only by GNU targets
../as-new: BFD (GNU Binutils) 2.26.51.20160628 internal error, aborting at .../gas/write.c:608 in size_seg
../as-new: Please report this bug.
vs:
.../gas/testsuite/gas/elf/type.s: Assembler messages:
.../gas/testsuite/gas/elf/type.s:30: Error: symbol type "gnu_unique_object" is supported only by GNU targets
.../gas/testsuite/gas/elf/type.s: Internal error, aborting at .../gas/write.c:602 in size_seg
Please report this bug.
With the removal of "libbfd.h" restore the latter message format.
gas/
* write.c: Remove "libbfd.h" inclusion.
PowerPC gcc aligns char arrays to a word which results in the test
failing since it expects a char alignment. As the test already uses
gcc attributes to assign variables to sections, we may as well use an
attribute to align too.
* testsuite/plugin_layout_with_alignment.c: Explicitly align all
variables.
A target like powerpc64 that is PIC by default doesn't need copy relocs.
* testsuite/Makefile.am (copy_test_protected): Disable for powerpc.
* testsuite/Makefile.in: Regenerate.
According to "ELF for the ARM(r) 64-bit Architecture (AArch64)",
this relocation can be used "to prevent removal of sections that
might otherwise appear to be unused."
gold/
* aarch64-reloc.def (NONE): New relocation.
* aarch64.cc (Target_aarch64::Scan::local): Handle R_AARCH64_NONE.
(Target_aarch64::Scan::global): Likewise.
* testsuite/Makefile.am (aarch64_reloc_none): New test.
* testsuite/Makefile.in: Regenerate.
* testsuite/aarch64_reloc_none.s: New test source file.
* testsuite/aarch64_reloc_none.sh: New test script.
Please see patch discussion:
https://www.sourceware.org/ml/binutils/2016-05/msg00322.html
2016-06-28 Sriraman Tallam <tmsriram@google.com>
* x86_64.cc (Lazy_view): New class.
(can_convert_mov_to_lea): Templatize function. Make the function
check for appropriate relocation types and use the view parameter
to get section contents.
(can_convert_callq_to_direct): New function.
(Target_x86_64<size>::Scan::global): Refactor.
(Target_x86_64<size>::Relocate::relocate): Refactor. Change any indirect
call via GOT that can be converted.
* testsuite/Makefile.am (x86_64_indirect_call_to_direct.sh): New test.
* testsuite/Makefile.in: Regenerate.
* testsuite/x86_64_indirect_call_to_direct1.s: New file.
* testsuite/x86_64_indirect_jump_to_direct1.s: New file.
In AArch64 displaced stepping and fast tracepoint, GDB/GDBserver needs
to check whether the offset can fit in the range. We are using int32_t
for offset, it is sufficient to get an offset from an instruction, but
it is not enough to get an offset from two addresses. For example,
we have a BL in shared lib which is at 0x0000002000040774, and the
scratch pad for displaced stepping is at 0x400698. The offset can't
fit in 28 bit imm. However, since we are using int32_t for offset, GDB
thinks the offset can fit it, and generate the B instruction with wrong
offset.
It fixes the following fail,
-FAIL: gdb.base/dso2dso.exp: next over call to sub2
gdb:
2016-06-28 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (aarch64_displaced_step_b): Use int64_t for
variable new_offset.
gdb/gdbserver:
2016-06-28 Yao Qi <yao.qi@linaro.org>
* linux-aarch64-low.c (aarch64_ftrace_insn_reloc_b): Use int64_t
for variable new_offset.
(aarch64_ftrace_insn_reloc_b_cond): Likewise.
(aarch64_ftrace_insn_reloc_cb): Likewise.
(aarch64_ftrace_insn_reloc_tb): Likewise.
(aarch64_install_fast_tracepoint_jump_pad): Likewise. Use
PRIx64 instead of PRIx32.
No need to check version if symbol is unreferenced and undefined.
bfd/
PR ld/20306
* elflink.c (elf_link_check_versioned_symbol): Return false
for unreferenced undefined symbol.
ld/testsuite/
* testsuite/ld-gc/gc.exp: Run pr20306 test.
* ld-gc/pr20306.c: New file.
* ld-gc/pr20306.d: Likewise.
bfin * elf32-bfin.c (bfin_adjust_dynamic_symbol): Fail if a COPY reloc
is needed.
ld * testsuite/ld-elf/comm-data.exp: Expect comm-data2 test to fail
for bfin.
* testsuite/ld-elf/elf.exp: Expect pr14170 and symbolic function
tests to fail for bfin.
* testsuite/ld-elf/endsym.d: Expect to fail with cr16, crx, dlx,
nds32 and visium.
* testsuite/ld-elf/var1.d: Expect to fail with d30v, dlx, ft32 and
microblaze.
* testsuite/ld-pe/pe.exp: Expect foreign symbol test to fail for
mcore-pe.
Complement commit a43942db49 ("LD/ELF: Unify STB_GNU_UNIQUE handling")
and use `supports_gnu_unique' with the `unique_symbol' and `type' tests,
fixing failures like:
.../binutils/testsuite/binutils-all/unique.s: Assembler messages:
.../binutils/testsuite/binutils-all/unique.s:2: Error: symbol type "gnu_unique_object" is supported only by GNU targets
ERROR: .../binutils/testsuite/binutils-all/unique.s: assembly failed
UNRESOLVED: ar unique symbol in archive
.../binutils/ar -s -r -c tmpdir/artest.a tmpdir/unique.o
Executing on host: .../binutils/ar -s -r -c tmpdir/artest.a tmpdir/unique.o (timeout = 300)
.../binutils/ar: tmpdir/unique.o: No such file or directory
FAIL: ar unique symbol in archive
and:
.../gas/testsuite/gas/elf/type.s: Assembler messages:
.../gas/testsuite/gas/elf/type.s:30: Error: symbol type "gnu_unique_object" is supported only by GNU targets
../as-new: BFD (GNU Binutils) 2.26.51.20160628 internal error, aborting at .../gas/write.c:608 in size_seg
../as-new: Please report this bug.
.../gas/testsuite/../../binutils/readelf -s dump.o | grep "1 *\[FIONTCU\]" > dump.out
Executing on host: sh -c {.../gas/testsuite/../../binutils/readelf -s dump.o >readelf.out 2>gas.stderr} /dev/null (timeout = 300)
readelf: Error: dump.o: Failed to read file's magic number
FAIL: elf type list
on MIPS/FreeBSD targets:
mips-freebsd -FAIL: ar unique symbol in archive
mips-freebsd -FAIL: elf type list
mips64-freebsd -FAIL: ar unique symbol in archive
mips64-freebsd -FAIL: elf type list
mips64el-freebsd -FAIL: ar unique symbol in archive
mips64el-freebsd -FAIL: elf type list
mipsel-freebsd -FAIL: ar unique symbol in archive
mipsel-freebsd -FAIL: elf type list
binutils/
* testsuite/binutils-all/ar.exp: Use `supports_gnu_unique' with
the `unique_symbol' test.
gas/
* testsuite/gas/elf/elf.exp: Use `supports_gnu_unique' with the
`type' test.
* elf32-arm.c (elf32_arm_backend_symbol_processing): New
function. Marks mapping symbols in object files as precious, so
that strip will not remove them.
(elf_backend_symbol_processing): Define.
ld * testsuite/ld-elf/merge.d: Add m68hc11 to list of targets that
expect to fail this test.
* testsuite/ld-scripts/overlay-size.d: Skip the entire test for
RX.
* testsuite/ld-scripts/rgn-at10.d: No longer expect this test to
fail for the RX.
* testsuite/ld-scripts/rgn-at11.d: Likewise.
* testsuite/ld-scripts/rgn-at2.d: Likewise.
* testsuite/ld-scripts/rgn-at6.d: Likewise.
* testsuite/ld-scripts/rgn-at7.d: Likewise.
* testsuite/ld-scripts/rgn-at8.d: Likewise.
When I implement linux_target_ops.get_syscall_trapinfo for aarch64 and arm,
I find the second parameter sysret isn't used at all. In RSP, we don't
need syscall return value either, because GDB can figure out the return
value from registers content got by 'g' packet.
This patch is to remove them.
gdb/gdbserver:
2016-06-28 Yao Qi <yao.qi@linaro.org>
* linux-low.c (get_syscall_trapinfo): Remove parameter sysret.
Callers updated.
* linux-low.h (struct linux_target_ops) <get_syscall_trapinfo>:
Remove parameter sysno.
* linux-x86-low.c (x86_get_syscall_trapinfo): Remove parameter
sysret.
In 82075af2c1 (Implement 'catch syscall'
for gdbserver), only x86 is supported, but the test can still be run
on other linux targets, like aarch64 and ppc, with native-gdbserver.
This causes many new fails.
This patch removes the check on isnative and on target triplets.
Instead, we can insert catch point, and resume the program to see whether
catch syscall is supported or not.
gdb/testsuite:
2016-06-28 Yao Qi <yao.qi@linaro.org>
* gdb.base/catch-syscall.exp: Remove check on isnative and target
triplets. Start gdb, execute catch syscall, and continue. Check
gdb's output to determine catch syscall is supported.
bfd * elfxx-sparc.c (_bfd_sparc_elf_relocate_section): Don't convert
R_SPARC_32 to R_SPARC_RELATIVE if class is ELFCLASS64.
gold * sparc.cc (Target_sparc::Scan::local): Don't convert R_SPARC_32
to R_SPARC_RELATIVE if class is ELFCLASS64.
(Target_sparc::Scan::global): Likewise.
ld * testsuite/ld-elf/symbolic-func.r: Allow non-zero offsets from
.text.
