processing_acc_compilation is only used in dbxread.c, so move it
there.
gdb/ChangeLog
2018-07-16 Tom Tromey <tom@tromey.com>
* dbxread.c (processing_acc_compilation): New global.
* buildsym.h (processing_acc_compilation): Don't declare.
This moves the global have_line_numbers into buildsym_compunit.
gdb/ChangeLog
2018-07-16 Tom Tromey <tom@tromey.com>
* buildsym.c (struct buildsym_compunit) <m_have_line_numbers>: New
member.
(have_line_numbers): Remove.
(record_line, prepare_for_building, end_symtab_get_static_block)
(augment_type_symtab): Update.
This moves the pending_macros global into buildsym_compunit.
gdb/ChangeLog
2018-07-16 Tom Tromey <tom@tromey.com>
* buildsym.c (~buildsym_compunit): Free the macro table.
(struct buildsym_compunit) <get_macro_table, release_macros>: New
methods.
<m_pending_macros>: New member.
(pending_macros): Remove.
(~scoped_free_pendings, get_macro_table, prepare_for_building)
(reset_symtab_globals, end_symtab_get_static_block)
(end_symtab_with_blockvector, augment_type_symtab)
(buildsym_init): Update.
This moves the global last_source_file into buildsym_compunit.
gdb/ChangeLog
2018-07-16 Tom Tromey <tom@tromey.com>
* buildsym.c (buildsym_compunit::buildsym_compunit): Add name
parameter.
(buildsym_compunit::set_last_source_file): New method.
<m_last_source_file>: New member.
(prepare_for_building): Remove "name" parameter.
(start_symtab, restart_symtab, reset_symtab_globals): Update.
(last_source_file): Remove.
(set_last_source_file, get_last_source_file): Update.
This adds an assertion in prepare_for_building. This was useful for
verifying whether some subsequent changes were valid.
gdb/ChangeLog
2018-07-16 Tom Tromey <tom@tromey.com>
* buildsym.c (prepare_for_building): Add assert.
This change buildsym_compunit::comp_dir to be a unique_xmalloc_ptr.
This is just a small cleanup to remove some manual memory management.
gdb/ChangeLog
2018-07-16 Tom Tromey <tom@tromey.com>
* buildsym.c (~buildsym_compunit): Update.
(struct buildsym_compunit) <comp_unit>: Now a unique_xmalloc_ptr.
(start_subfile, patch_subfile_names)
(end_symtab_with_blockvector): Update.
This changes buildsym_compunit to use new and delete.
gdb/ChangeLog
2018-07-16 Tom Tromey <tom@tromey.com>
* buildsym.c (struct buildsym_compunit): Add constructor,
destructor, initializers.
(start_buildsym_compunit): Remove.
(free_buildsym_compunit): Use "delete".
(start_symtab, restart_symtab): Use "new".
Fix this with gcc 6.3.0:
/home/simark/src/binutils-gdb/gdb/symfile.c: In function 'void set_objfile_default_section_offset(objfile*, const section_addr_info&, CORE_ADDR)':
/home/simark/src/binutils-gdb/gdb/symfile.c:2114:14: error: types may not be defined in a for-range-declaration [-Werror]
for (const struct other_sections *objf_sect : objf_addrs_sorted)
^~~~~~
gdb/ChangeLog:
* symfile.c (set_objfile_default_section_offset): Remove struct
keyword.
Since I helped upstream openrisc I would like to claim responsibility to
maintain it.
gdb/ChangeLog:
yyyy-mm-dd Stafford Horne <shorne@gmail.com>
* (Responsible Maintainers): Add myself as or1k maintainer.
Signed-off-by: Stafford Horne <shorne@gmail.com>
I've noticed that on a few hosts, when given an invalid hostname,
gdbserver fails with:
spawn /../../gdb/gdbserver/gdbserver --once tcp8:123:2353 /gdb/build/fedora-s390x/build/gdb/testsuite/outputs/gdb.server/server-connect/server-connect
tcp8:123:2353: cannot resolve name: No address associated with hostname
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Exiting
Unfortunately, this causes a fail on the new
gdb.server/server-connect.exp test (introduced by the IPv6 patch):
FAIL: gdb.server/server-connect.exp: tcp8: start gdbserver: gdbserver should fail but did not
This happens because we're expecting for another variant of this error
message:
cannot resolve name: Name or service not known
Therefore, this patch extends the helper function 'gdbserver_start' to
also recognize the "No address associated with hostname" message.
This "fixes" the testcase on the hosts that use this variant.
gdb/testsuite/ChangeLog:
2018-07-13 Sergio Durigan Junior <sergiodj@redhat.com>
* lib/gdbserver-support.exp (gdbserver_start): Expect for the
message "No address associated with hostname" when gdbserver
cannot resolve the hostname.
This removes a clang warning coming from -Wmissing-braces.
ChangeLog
2018-07-13 Tom Tromey <tom@tromey.com>
* symfile.c (set_objfile_default_section_offset): Use extra braces
around initializer.
The BASR instruction behaves differently depending on whether the second
operand is a number from 1 to 15, or zero. In the former case BASR jumps
to the address contained in the general register of that number, but in
the latter case no jump is performed. GDB's displaced-stepping logic does
not distinguish these cases, although it should.
This is fixed. In the case where no jump is performed the PC is adjusted
to point back after the original instruction. Otherwise the PC is left
alone.
gdb/ChangeLog:
* s390-tdep.c (s390_displaced_step_fixup): Adjust PC for a
non-branching basr.
We start from a process_info pointer, pass down process->pid, and
then the target_kill implementations need to find the process from the
pid again. Pass the process_info pointer down directly instead.
gdb/gdbserver/ChangeLog:
2018-07-13 Pedro Alves <palves@redhat.com>
* linux-low.c (linux_kill): Change parameter to process_info
pointer instead of pid. Adjust.
* lynx-low.c (lynx_kill): Likewise.
* nto-low.c (nto_kill): Likewise.
* spu-low.c (spu_kill): Likewise.
* win32-low.c (win32_kill): Likewise.
* server.c (handle_v_kill, kill_inferior_callback)
(detach_or_kill_for_exit): Adjust.
* target.c (kill_inferior): Change parameter to process_info
pointer instead of pid. Adjust.
* target.h (struct target_ops) <kill>: Change parameter to
process_info pointer instead of pid. Adjust all implementations
and callers.
(kill_inferior): Likewise.
We start from a process_info pointer, pass down process->pid, and then
the target_detach and target_join implementations need to find the
process from the pid again. Pass the process_info pointer down
directly instead.
gdb/gdbserver/ChangeLog:
2018-07-13 Pedro Alves <palves@redhat.com>
* linux-low.c (linux_detach, linux_join): Change parameter to
process_info pointer instead of pid. Adjust.
* lynx-low.c (lynx_detach, lynx_join): Likewise.
* nto-low.c (nto_detach): Likewise.
* spu-low.c (spu_detach, spu_join): Likewise.
* win32-low.c (win32_detach, win32_join): Likewise.
* server.c (handle_detach, detach_or_kill_for_exit): Adjust.
* target.h (struct target_ops) <detach, join>: Change parameter to
process_info pointer instead of pid. Adjust all implementations
and callers.
(detach_inferior, join_inferior): Rename 'pid' parameter to
'proc'.
tests added for:
* number_or_range_parser
In particular, it tests the cur_tok when parsing is finished.
* parse_flags
* parse_flags_qcs
gdb/ChangeLog
2018-07-12 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
unittests/cli-utils-selftests.c
* unittests/cli-utils-selftests.c: New file.
Also, add prefixes to make some non unique tests unique.
gdb/testsuite/ChangeLog
2018-07-12 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.threads/pthreads.exp: Test qcs FLAG arguments.
Add some test prefixes to make tests unique.
gdb/testsuite/ChangeLog
2018-07-12 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.base/frameapply.c: New file.
* gdb.base/frameapply.exp: New file.
Enhance 'thread apply' command to also accept [FLAG]... arguments.
An example usage for this new argument:
thread apply all -s frame apply all -s p some_local_var_somewhere
Prints the thread id, frame location and some_local_var_somewhere
value in frames of threads that have such local var.
To make the life of the user easier, the most typical use cases
have shortcuts :
taas : shortcut for 'thread apply all -s'
tfaas : shortcut for 'thread apply all -s frame apply all -s"
An example usage :
tfaas p some_local_var_somewhere
same as the longer:
'thread apply all -s frame apply all -s p some_local_var_somewhere'
gdb/ChangeLog
2018-07-12 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* thread.c (thr_try_catch_cmd): New function.
(thread_apply_all_command): Handle qcs flags.
(thread_apply_command): Handle qcs flags.
(taas_command): New function.
(tfaas_command): New function.
(_initialize_thread): Update to setup the new commands 'taas
and 'tfaas'. Change doc string for 'thread apply'.
Implement frame apply [all | COUNT | -COUNT | level LEVEL... ] [FLAG]... COMMAND.
Also implement the command 'faas COMMAND', a shortcut for
'frame apply all -s COMMAND'.
The syntax of 'frame apply' to specify some innermost or outermost
frames is similar to 'backtrace' command, using COUNT or -COUNT.
To apply a COMMAND to a more specific set of frames, the following
new command and syntax can be used:
frame apply level LEVEL... [FLAG]... COMMAND
where LEVEL is one or more frame levels or range of frame levels.
The new command 'frame apply' allows to apply a COMMAND to a number of frames,
or to all frames, or to a set of frames.
The optional [FLAG]... arguments allow to control what output to produce
and how to handle errors raised when applying COMMAND to a frame.
Some example usages for this new command:
frame apply all info frame
Produce info frame for all frames.
frame apply all p $sp
For each frame, print the location, followed by the frame sp.
frame apply all -q p $sp
Same as before, but -q flag (q = quiet) indicates to only print
the frames sp.
frame apply all p some_local_var_somewhere
Print some_local_var_somewhere in all frames. 'frame apply'
will abort as soon as the print command fails.
frame apply all -c p some_local_var_somewhere
Same as before, but -c flag (c = continue) means to
print the error and continue applying command in case the
print command fails.
frame apply all -s p some_local_var_somewhere
Same as before, but -s flag (s = silent) means to
be silent for frames where the print command fails.
In other words, this allows to 'search' the frame in which
some_local_var_somewhere can be printed.
frame apply all -s -q p some_local_var_somewhere
Same as before, but does not print the frame info in which
the variable is found.
frame apply level 2-4 5 8-10 -s p i = i + 1
Increments i in the identified frames.
gdb/ChangeLog
2018-07-12 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* stack.c: (trailing_outermost_frame): New function, mostly
extracted from backtrace_command_1.
(leading_innermost_frame): New function.
(backtrace_command_1): Update to call trailing_outermost_frame.
(frame_apply_command_count): New function.
(frame_apply_level_command): New function.
(frame_apply_all_command): New function.
(frame_apply_command): New function.
(faas_command): New function.
(frame_cmd_list): New variable.
(_initialize_stack): Update to setup the new commands 'frame apply'
and 'faas'.
Add helper functions parse_flags and parse_flags_qcs.
parse_flags helper function allows to look for a set of flags at
the start of a string.
A flag must be given individually.
parse_flags_qcs is a specialised helper function to handle
the flags -q, -c and -s, that are used in the new command 'frame apply'
and in the command 'thread apply.
Modify number_or_range_parser::get_number to differentiate a
- followed by digits from a - followed by an alpha (i.e. a flag or an option).
That is needed for the addition of the [FLAG]... arguments to
thread apply ID... [FLAG]... COMMAND
Remove bool number_or_range_parser::m_finished, rather
implement the 'finished' logic inside number_or_range_parser::finished.
The new logic properly detects the end of parsing even if not at
end of the string. This ensures that number_or_range_parser::cur_tok
really points past the last parsed token when parsing is finished.
Before, it was always pointing at the end of the string.
As parsing now is finished directly when not positioned on a number,
number_is_in_list must do an error check before the loop getting all
numbers.
The error message for 'thread apply -$unknownconvvar p 1'
is now the more clear:
Convenience variable must have integer value.
Invalid thread ID: -$unknownconvvar p 1
instead of previously:
negative value
gdb/ChangeLog
2018-07-12 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* cli-utils.c (number_or_range_parser::get_number): Only handle
numbers or convenience var as numbers.
(parse_flags): New function.
(parse_flags_qcs): New function.
(number_or_range_parser::finished): Ensure parsing end is detected
before end of string.
* cli-utils.h (parse_flags): New function.
(parse_flags_qcs): New function.
(number_or_range_parser): Remove m_finished bool.
(number_or_range_parser::skip_range): Set m_in_range to false.
gdb/testsuite/ChangeLog
2018-07-12 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.base/skip.exp: Update expected error message.
When building GDB on mingw32, it fails with:
../../binutils-gdb/gdb/ser-tcp.c: In function 'int try_connect(const addrinfo*, unsigned int*)':
../../binutils-gdb/gdb/ser-tcp.c:176:25: error: invalid conversion from 'int*' to 'u_long* {aka long unsigned int*}' [-fpermissive]
ioctl (sock, FIONBIO, &ioarg);
^~~~~~
In file included from ../../binutils-gdb/gdb/serial.h:23:0,
from ../../binutils-gdb/gdb/ser-tcp.c:21:
/usr/x86_64-w64-mingw32/sys-root/mingw/include/winsock2.h:977:34: note: initializing argument 3 of 'int ioctlsocket(SOCKET, long int, u_long*)'
WINSOCK_API_LINKAGE int WSAAPI ioctlsocket(SOCKET s,__LONG32 cmd,u_long *argp);
^~~~~~~~~~~
make[2]: *** [Makefile:1610: ser-tcp.o] Error 1
The problem happens because the IPv6
commit (c7ab0aef11) wrongly removed the
code responsible for declaring 'ioarg' with a different type if
building for Windows. This patch restores that.
gdb/ChangeLog:
2018-07-12 Sergio Durigan Junior <sergiodj@redhat.com>
* ser-tcp.c (try_connect): Declare 'ioarg' as 'u_long' if building
on Windows.
This patch implements IPv6 support for both GDB and gdbserver. Based
on my research, it is the fourth attempt to do that since 2006. Since
I used ideas from all of the previous patches, I also added their
authors's names on the ChangeLogs as a way to recognize their
efforts. For reference sake, you can find the previous attempts at:
https://sourceware.org/ml/gdb-patches/2006-09/msg00192.htmlhttps://sourceware.org/ml/gdb-patches/2014-02/msg00248.htmlhttps://sourceware.org/ml/gdb-patches/2016-02/msg00226.html
The basic idea behind the patch is to start using the new
'getaddrinfo'/'getnameinfo' calls, which are responsible for
translating names and addresses in a protocol-independent way. This
means that if we ever have a new version of the IP protocol, we won't
need to change the code again (or, at least, won't have to change the
majority of the code).
The function 'getaddrinfo' returns a linked list of possible addresses
to connect to. Dealing with multiple addresses proved to be a hard
task with the current TCP auto-retry mechanism implemented on
ser-tcp:net_open. For example, when gdbserver listened only on an
IPv4 socket:
$ ./gdbserver --once 127.0.0.1:1234 ./a.out
and GDB was instructed to try to connect to both IPv6 and IPv4
sockets:
$ ./gdb -ex 'target extended-remote localhost:1234' ./a.out
the user would notice a somewhat big delay before GDB was able to
connect to the IPv4 socket. This happened because GDB was trying to
connect to the IPv6 socket first, and had to wait until the connection
timed out before it tried to connect to the IPv4 socket.
For that reason, I had to rewrite the main loop and implement a new
method for handling multiple connections. After some discussion,
Pedro and I agreed on the following algorithm:
1) For each entry returned by 'getaddrinfo', we try to open a socket
and connect to it.
2.a) If we have a successful 'connect', we just use that connection.
2.b) If we don't have a successfull 'connect', but if we've got a
ECONNREFUSED (meaning the the connection was refused), we keep track
of this fact by using a flag.
2.c) If we don't have a successfull 'connect', but if we've got a
EINPROGRESS (meaning that the connection is in progress), we perform
a 'select' call on the socket until we have a result (either a
successful connection, or an error on the socket).
3) If tcp_auto_retry is true, and we haven't gotten a successful
connection, and at least one of our attempts failed with
ECONNREFUSED, then we wait a little bit (i.e., call
'wait_for_connect'), check to see if there was a
timeout/interruption (in which case we bail out), and then go back
to (1).
After multiple tests, I was able to connect without delay on the
scenario described above, and was also able to connect in all other
types of scenarios.
I also implemented some hostname parsing functions (along with their
corresponding unit tests) which are used to help GDB and gdbserver to
parse hostname strings provided by the user. These new functions are
living inside common/netstuff.[ch]. I've had to do that since IPv6
introduces a new URL scheme, which defines that square brackets can be
used to enclose the host part and differentiate it from the
port (e.g., "[::1]:1234" means "host ::1, port 1234"). I spent some
time thinking about a reasonable way to interpret what the user wants,
and I came up with the following:
- If the user has provided a prefix that doesn't specify the protocol
version (i.e., "tcp:" or "udp:"), or if the user has not provided
any prefix, don't make any assumptions (i.e., assume AF_UNSPEC when
dealing with 'getaddrinfo') *unless* the host starts with "[" (in
which case, assume it's an IPv6 host).
- If the user has provided a prefix that does specify the protocol
version (i.e., "tcp4:", "tcp6:", "udp4:" or "udp6:"), then respect
that.
This method doesn't follow strictly what RFC 2732 proposes (that
literal IPv6 addresses should be provided enclosed in "[" and "]")
because IPv6 addresses still can be provided without square brackets
in our case, but since we have prefixes to specify protocol versions I
think this is not an issue.
Another thing worth mentioning is the new 'GDB_TEST_SOCKETHOST'
testcase parameter, which makes it possible to specify the
hostname (without the port) to be used when testing GDB and
gdbserver. For example, to run IPv6 tests:
$ make check-gdb RUNTESTFLAGS='GDB_TEST_SOCKETHOST=tcp6:[::1]'
Or, to run IPv4 tests:
$ make check-gdb RUNTESTFLAGS='GDB_TEST_SOCKETHOST=tcp4:127.0.0.1'
This required a few changes on the gdbserver-base.exp, and also a
minimal adjustment on gdb.server/run-without-local-binary.exp.
Finally, I've implemented a new testcase,
gdb.server/server-connect.exp, which is supposed to run on the native
host and perform various "smoke tests" using different connection
methods.
This patch has been regression-tested on BuildBot and locally, and
also built using a x86_64-w64-mingw32 GCC, and no problems were found.
gdb/ChangeLog:
2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
Paul Fertser <fercerpav@gmail.com>
Tsutomu Seki <sekiriki@gmail.com>
Pedro Alves <palves@redhat.com>
* Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
'unittests/parse-connection-spec-selftests.c'.
(COMMON_SFILES): Add 'common/netstuff.c'.
(HFILES_NO_SRCDIR): Add 'common/netstuff.h'.
* NEWS (Changes since GDB 8.2): Mention IPv6 support.
* common/netstuff.c: New file.
* common/netstuff.h: New file.
* ser-tcp.c: Include 'netstuff.h' and 'wspiapi.h'.
(wait_for_connect): Update comment. New parameter
'gdb::optional<int> sock' instead of 'struct serial *scb'.
Use 'sock' directly instead of 'scb->fd'.
(try_connect): New function, with code from 'net_open'.
(net_open): Rewrite main loop to deal with multiple
sockets/addresses. Handle IPv6-style hostnames; implement
support for IPv6 connections.
* unittests/parse-connection-spec-selftests.c: New file.
gdb/gdbserver/ChangeLog:
2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
Paul Fertser <fercerpav@gmail.com>
Tsutomu Seki <sekiriki@gmail.com>
* Makefile.in (SFILES): Add '$(srcdir)/common/netstuff.c'.
(OBS): Add 'common/netstuff.o'.
(GDBREPLAY_OBS): Likewise.
* gdbreplay.c: Include 'wspiapi.h' and 'netstuff.h'.
(remote_open): Implement support for IPv6
connections.
* remote-utils.c: Include 'netstuff.h', 'filestuff.h'
and 'wspiapi.h'.
(handle_accept_event): Accept connections from IPv6 sources.
(remote_prepare): Handle IPv6-style hostnames; implement
support for IPv6 connections.
(remote_open): Implement support for printing connections from
IPv6 sources.
gdb/testsuite/ChangeLog:
2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
Paul Fertser <fercerpav@gmail.com>
Tsutomu Seki <sekiriki@gmail.com>
* README (Testsuite Parameters): Mention new 'GDB_TEST_SOCKETHOST'
parameter.
* boards/native-extended-gdbserver.exp: Do not set 'sockethost'
by default.
* boards/native-gdbserver.exp: Likewise.
* gdb.server/run-without-local-binary.exp: Improve regexp used
for detecting when a remote debugging connection succeeds.
* gdb.server/server-connect.exp: New file.
* lib/gdbserver-support.exp (gdbserver_default_get_comm_port):
Do not prefix the port number with ":".
(gdbserver_start): New global GDB_TEST_SOCKETHOST. Implement
support for detecting and using it. Add '$debughost_gdbserver'
to the list of arguments used to start gdbserver. Handle case
when gdbserver cannot resolve a network name.
gdb/doc/ChangeLog:
2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
Paul Fertser <fercerpav@gmail.com>
Tsutomu Seki <sekiriki@gmail.com>
* gdb.texinfo (Remote Connection Commands): Add explanation
about new IPv6 support. Add new connection prefixes.
This commit adds a GDB workaround for the GDBserver bug exposed by
commit f2ffa92bbc ("gdb: Eliminate the 'stop_pc' global"), so that
newer GDBs can continue working with older GDBservers.
gdb/ChangeLog:
2018-07-11 Pedro Alves <palves@redhat.com>
PR gdb/23377
* remote.c (remote_target::remote_detach_pid): Call
set_current_process.
This fixes a gdb.base/multi-forks.exp regression with GDBserver.
Git commit f2ffa92bbc ("gdb: Eliminate the 'stop_pc' global") caused
the regression by exposing a latent bug in gdbserver.
The bug is that GDBserver's implementation of the D;PID packet
incorrectly assumes that the selected thread points to the process
being detached. This happens via the any_persistent_commands call,
which calls current_process:
(gdb) bt
#0 0x000000000040a57e in internal_error(char const*, int, char const*, ...)
(file=0x4a53c0 "src/gdb/gdbserver/inferiors.c", line=212, fmt=0x4a539e "%s:
Assertion `%s' failed.") at src/gdb/gdbserver/../common/errors.c:54
#1 0x0000000000420acf in current_process() () at
src/gdb/gdbserver/inferiors.c:212
#2 0x00000000004226a0 in any_persistent_commands() () at
gdb/gdbserver/mem-break.c:308
#3 0x000000000042cb43 in handle_detach(char*) (own_buf=0x6f0280 "D;62ea") at
src/gdb/gdbserver/server.c:1210
#4 0x0000000000433af3 in process_serial_event() () at
src/gdb/gdbserver/server.c:4055
#5 0x0000000000434878 in handle_serial_event(int, void*) (err=0,
client_data=0x0)
The "eliminate stop_pc" commit exposes the problem because before that
commit, GDB's switch_to_thread always read the newly-selected thread's
PC, and that would end up forcing GDBserver's selected thread to
change accordingly as side effect. After that commit, GDB no longer
reads the thread's PC, and GDBserver does not switch the thread.
Fix this by removing the assumption from GDBserver.
gdb/gdbserver/ChangeLog:
2018-07-11 Pedro Alves <palves@redhat.com>
PR gdb/23377
* mem-break.c (any_persistent_commands): Add process_info
parameter and use it instead of relying on the current process.
Change return type to bool.
* mem-break.h (any_persistent_commands): Add process_info
parameter and change return type to bool.
* server.c (handle_detach): Remove require_running_or_return call.
Look up the process_info for the process we're about to detach.
If not found, return back error to GDB. Adjust
any_persistent_commands call to pass down a process pointer.
There's this little bit of ecoff support in the h8300 port that I ran
into that I think we could remove. Grepping around BFD, I don't think
ECOFF is supported for h8300.
And if not, I'm failing to see why we'd support ECOFF debug info in
ELF for h8300 (.mdebug). It kind of seems like someone just installed
the set_gdbarch_ecoff_reg_to_regnum hook at the same time the dwarf2
and stabs hooks were installed.
I'm removing this so that greps for ecoff stuff only lead to MIPS, as
ISTR that Linux/MIPS support still relies on some subset of ECOFF for
something.
gdb/ChangeLog:
2018-07-11 Pedro Alves <palves@redhat.com>
* h8300-tdep.c (h8300_gdbarch_init): Remove
set_gdbarch_ecoff_reg_to_regnum calls.
This patch fixes a failure that happens when a structure has a static
member whose type is the same as itself. From the bug report:
Example code:
struct A
{
static A Empty;
int a;
};
int main(void) {
A a;
return 0;
}
Output:
(gdb) ptype/o A
/* offset | size */ type = struct A {
static struct A {
static struct A {
static struct A {
static struct A {
static struct A {
static struct A {
... # infinite loop
The problem here is that GDB is not taking into account the fact that
static members inside a class/struct are not stored in the
class/struct, and therefore they should not be accounted for during
the display of the offsets/sizes. The fix is simple: we just check if
the field we're dealing with (on
c-typeprint.c:c_type_print_base_struct_union) is static, and if it is
then we don't iterate over it.
This patch also adds a new test for this case, and doesn't introduce
any regressions. I believe it is important enough to be included in
the 8.2 branch.
OK?
gdb/ChangeLog:
2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com>
PR c++/23373
* c-typeprint.c (c_type_print_base_struct_union): Don't print
offsets/sizes for static members of a class/struct.
gdb/testsuite/ChangeLog:
2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com>
PR c++/23373
* gdb.base/ptype-offsets.cc (struct static_member): New
struct.
(main) <stmember>: New variable.
* gdb.base/ptype-offsets.exp: Add test for printing a struct
with a static member in it.
Running gdbserver under Valgrind I get:
==26925== Conditional jump or move depends on uninitialised value(s)
==26925== at 0x473E7F: i387_cache_to_xsave(regcache*, void*) (i387-fp.c:579)
==26925== by 0x46E3ED: x86_fill_xstateregset(regcache*, void*) (linux-x86-low.c:418)
==26925== by 0x45E747: regsets_store_inferior_registers(regsets_info*, regcache*) (linux-low.c:5456)
==26925== by 0x45EEF8: linux_store_registers(regcache*, int) (linux-low.c:5731)
==26925== by 0x426441: regcache_invalidate_thread(thread_info*) (regcache.c:89)
==26925== by 0x45CCAF: linux_resume_one_lwp_throw(lwp_info*, int, int, siginfo_t*) (linux-low.c:4447)
==26925== by 0x45CE2A: linux_resume_one_lwp(lwp_info*, int, int, siginfo_t*) (linux-low.c:4519)
==26925== by 0x45E17C: proceed_one_lwp(thread_info*, lwp_info*) (linux-low.c:5216)
==26925== by 0x45DC81: linux_resume_one_thread(thread_info*, bool) (linux-low.c:5031)
==26925== by 0x45DD34: linux_resume(thread_resume*, unsigned long)::{lambda(thread_info*)#2}::operator()(thread_info*) const (linux-low.c:5095)
==26925== by 0x462907: void for_each_thread<linux_resume(thread_resume*, unsigned long)::{lambda(thread_info*)#2}>(linux_resume(thread_resume*, unsigned long)::{lambda(thread_info*)#2}) (gdbthread.h:150)
==26925== by 0x45DE62: linux_resume(thread_resume*, unsigned long) (linux-low.c:5093)
==26925==
==26925== Conditional jump or move depends on uninitialised value(s)
==26925== at 0x473EBD: i387_cache_to_xsave(regcache*, void*) (i387-fp.c:586)
==26925== by 0x46E3ED: x86_fill_xstateregset(regcache*, void*) (linux-x86-low.c:418)
==26925== by 0x45E747: regsets_store_inferior_registers(regsets_info*, regcache*) (linux-low.c:5456)
==26925== by 0x45EEF8: linux_store_registers(regcache*, int) (linux-low.c:5731)
==26925== by 0x426441: regcache_invalidate_thread(thread_info*) (regcache.c:89)
==26925== by 0x45CCAF: linux_resume_one_lwp_throw(lwp_info*, int, int, siginfo_t*) (linux-low.c:4447)
==26925== by 0x45CE2A: linux_resume_one_lwp(lwp_info*, int, int, siginfo_t*) (linux-low.c:4519)
==26925== by 0x45E17C: proceed_one_lwp(thread_info*, lwp_info*) (linux-low.c:5216)
==26925== by 0x45DC81: linux_resume_one_thread(thread_info*, bool) (linux-low.c:5031)
==26925== by 0x45DD34: linux_resume(thread_resume*, unsigned long)::{lambda(thread_info*)#2}::operator()(thread_info*) const (linux-low.c:5095)
==26925== by 0x462907: void for_each_thread<linux_resume(thread_resume*, unsigned long)::{lambda(thread_info*)#2}>(linux_resume(thread_resume*, unsigned long)::{lambda(thread_info*)#2}) (gdbthread.h:150)
==26925== by 0x45DE62: linux_resume(thread_resume*, unsigned long) (linux-low.c:5093)
The problem is a type/width mismatch in code like this, in
gdbserver/i387-fp.c:
/* Some registers are 16-bit. */
collect_register_by_name (regcache, "fctrl", &val);
fp->fctrl = val;
In the above code:
#1 - 'val' is a 64-bit unsigned long.
#2 - "fctrl" is 32-bit in the register cache, thus half of 'val' is
left uninitialized by collect_register_by_name, which works with
an untyped raw buffer output (i.e., void*).
#3 - fp->fctrl is an unsigned short (16-bit). For some such
registers we're masking off the uninitialized bits with 0xffff,
but not in all cases.
We end up in such a fragile situation because
collect_registers_by_name works with an untyped output buffer pointer,
making it easy to pass a pointer to a variable of the wrong size.
Fix this by using regcache_raw_get_unsigned instead (actually a new
regcache_raw_get_unsigned_by_name wrapper), which always returns a
zero-extended ULONGEST register value. It ends up simplifying the
i387-tdep.c code a bit, even.
gdb/gdbserver/ChangeLog:
2018-07-11 Pedro Alves <palves@redhat.com>
* i387-fp.c (i387_cache_to_fsave, cache_to_fxsave)
(i387_cache_to_xsave): Use regcache_raw_get_unsigned_by_name
instead of collect_register_by_name.
* regcache.c (regcache_raw_get_unsigned_by_name): New.
* regcache.h (regcache_raw_get_unsigned_by_name): New.
tdesc_register_size returns number of bits, not bytes.
Rename to make it clearer.
Also, fixed bug in aarch64_get_tdesc_vq which assumed bytes.
gdb/
* target-descriptions.c (tdesc_register_bitsize): Rename.
* target-descriptions.h (tdesc_register_bitsize): Likewise.
* rs6000-tdep.c (rs6000_gdbarch_init): Use new name.
* aarch64-tdep.c (aarch64_get_tdesc_vq): Convert size.
This changes moribund_locations to use a std::vector rather than VEC.
I also noticed that moribund_locations is only used in breakpoint.c,
so now it is static as well.
It might be possible to make this code a bit simpler by using a
ref_ptr in moribund_locations; however, I have not done this.
Tested by the buildbot.
gdb/ChangeLog
2018-07-10 Tom Tromey <tom@tromey.com>
* breakpoint.c (moribund_locations): Now static and a
std::vector.
(breakpoint_init_inferior, moribund_breakpoint_here_p)
(build_bpstat_chain, update_global_location_list)
(breakpoint_retire_moribund): Update.
* breakpoint.h (bp_location_p): Remove typedef. Don't declare
VEC.
Expand the gdb.base/watchpoint-reuse-slot.exp test to be run twice,
once with hardware watchpoints disabled (this is new) and then with
hardware watchpoints enabled (the old way).
Running with hardware watchpoints enabled is skipped if the board file
says that hardware watchpoints are not supported on this target.
gdb/testsuite/ChangeLog:
* gdb.base/watchpoint-reuse-slot.exp: Test with hardware
watchpoints enabled and disabled.
An assertion when setting up arguments for an inferior call checks the
size of the argument against xlen. However, if xlen and flen are
different sizes, and the argument is being placed into a floating
pointer register then we should be comparing against flen not xlen.
This issue shows up as an assertion failure when running on an rv32g
target with a binary compiled using the rv32f abi and making an
inferior call involving large floating point arguments, for example
the test gdb.base/infcall-nested-structs.exp.
gdb/ChangeLog:
* riscv-tdep.c (riscv_is_fp_regno_p): New function.
(riscv_register_reggroup_p): Use new function, remove unneeded
parenthesis.
(riscv_push_dummy_call): Extend assert to compare against xlen or
flen based on register type.
In debug printing, use TYPE_SAFE_NAME instead of replicating the
functionality using TYPE_NAME and a null check.
gdb/ChangeLog:
* riscv-tdep.c (riscv_print_arg_location): Use TYPE_SAFE_NAME.
Switch to use add_setshow_zuinteger_unlimited_cmd for some of the
control variables in remote.c. The variables
hardware-watchpoint-limit, hardware-breakpoint-limit, and
hardware-watchpoint-length-limit are all changed. For example, a user
will now see this:
(gdb) show remote hardware-breakpoint-limit
The maximum number of target hardware breakpoints is unlimited.
Instead of this:
(gdb) show remote hardware-breakpoint-limit
The maximum number of target hardware breakpoints is -1.
And can do this:
(gdb) set remote hardware-breakpoint-limit unlimited
However, previously any negative value implied "unlimited", now only
-1, or the text "unlimited" can be used for unlimited. Any other
negative value will give an error about invalid input. This is a
small change in the user interface, but, hopefully, this will not
cause too many problems.
I've also added show functions for these three variables to allow for
internationalisation.
gdb/ChangeLog:
* remote.c (show_hardware_watchpoint_limit): New function.
(show_hardware_watchpoint_length_limit): New function.
(show_hardware_breakpoint_limit): New function.
(_initialize_remote): Use add_setshow_zuinteger_unlimited_cmd
where appropriate, update help text.
gdb/doc/ChangeLog:
* gdb.texinfo (Remote Configuration): Update descriptions for
set/show of hardware-watchpoint-limit, hardware-breakpoint-limit,
and hardware-watchpoint-length-limit variables.
In the gdb.base/examine-backward.exp test script, we check to see if
address zero is readable, and then read memory first forward from
address zero, and then backward from address zero.
The problem is, being able to read address zero does not guarantee
that you'll be able to read from the other end of the address space,
and the test probably shouldn't assume that is the case.
This patch updates the test script so that even if address zero is
known non-readable, we still run the tests, the tests in question are
mostly about, can GDB calculate the correct address to read from, we
can confirm this even if the final read ultimately fails. We also no
longer assume that if address zero is readable, then the other end of
the address space will be readable.
One further change is that, when we examined the memory at address
zero, the regexp used to match the address expected that the zero
address would have two '0' digits as the least significant digits. As
GDB strips leading zeros from addresses this was causing the test to
fail. I've reduced the zero address to a single 0 digit.
gdb/testsuite/ChangeLog:
* gdb.base/examine-backward.exp: Still run tests around address
0x0, even if address 0x0 is not readable. Update the pattern for
matching address 0x0 in expected output.
Neither XM_CDEPS nor NAT_CLIBS are defined anywhere, so remove the
uses.
gdb/ChangeLog
2018-07-09 Tom Tromey <tom@tromey.com>
* Makefile.in (CDEPS): Don't mention XM_CDEPS.
(CLIBS): Don't mention NAT_CLIBS.
Nothing defines XM_ADD_FILES, TM_ADD_FILES, or NAT_ADD_FILES any more,
so consequently ADD_FILES and ADD_DEPS are no longer needed. So, this
removes them.
gdb/ChangeLog
2018-07-09 Tom Tromey <tom@tromey.com>
* Makefile.in (ADD_FILES, ADD_DEPS): Remove.
(LIBGDB_OBS, clean mostlyclean): Update.
(gdb$(EXEEXT), insight$(EXEEXT)): Update.
This minimizes the "make" output from the yacc and lex rules,
following the same technique as the rest of the Makefile.
The lex rule had a special case to deal with the situation where flex
is not available. I don't think this is needed, so I removed it. If
flex is truly unavailable, the person building gdb can simply "touch"
the output file.
gdb/ChangeLog
2018-07-09 Tom Tromey <tom@tromey.com>
* Makefile.in (%.c: %.y): Use ECHO_YACC.
(%.c: %.l): Use ECHO_LEX. Just fail if flex not available.
* silent-rules.mk (ECHO_YACC, ECHO_LEX): New variables.
exec.c ws handled specially in COMMON_OBS, but there doesn't seem to
be a reason for this. This changes the Makefile to treat exec.c as an
ordinary source file.
gdb/ChangeLog
2018-07-09 Tom Tromey <tom@tromey.com>
* Makefile.in (ALLDEPFILES): Remove exec.c.
(COMMON_OBS): Remove exec.o.
(COMMON_SFILES): Add exec.c.
I don't think anyone uses lint any more, so this removes the support
for it from the Makefile.
gdb/ChangeLog
2018-07-09 Tom Tromey <tom@tromey.com>
* Makefile.in (LINT, LINTFLAGS, LINTFILES, lint): Remove.
This introduces a stamp file for version.c, preventing unnecessary
version.o rebuilds.
gdb/ChangeLog
2018-07-09 Tom Tromey <tom@tromey.com>
* Makefile.in (clean mostlyclean): Remove stamp-version.
(version.c): Depend on stamp-version.
(stamp-version): New rule, from version.c rule.
This introduces a stamp file for init.c. This prevents constant
rebuilds of init.o, by arranging for init.c to only be modified when
its contents change. (FWIW this is a standard idiom in use by
Automake and by gdb itself for many years.)
gdb/ChangeLog
2018-07-09 Tom Tromey <tom@tromey.com>
* Makefile.in (init.c): Depend on stamp-init.
(stamp-init): New rule, from init.c rule.
(clean mostlyclean): Remove stamp-init.
This simplifies the INIT_FILES variable. COMMON_OBS includes
CONFIG_OBS and SUBDIR_GCC_COMPILE_OBS, so there's no need to reference
CONFIG_OBS or SUBDIR_GCC_COMPILE_SRCS there. Once this is done, it it
clear that duplicates can't occur, so remove the duplicate-removing
code as well.
gdb/ChangeLog
2018-07-09 Tom Tromey <tom@tromey.com>
* Makefile.in (INIT_FILES): Remove CONFIG_SRCS,
SUBDIR_GCC_COMPILE_SRCS.
The init.c build rule has a few sed expressions that aren't necessary
any more. This removes them.
gdb/ChangeLog
2018-07-09 Tom Tromey <tom@tromey.com>
* Makefile.in (init.c): Remove some unused sed rules.
The TSOBS variable doesn't seem to serve a useful purpose in
gdb/Makefile.in, so remove it.
gdb/ChangeLog
2018-07-09 Tom Tromey <tom@tromey.com>
* Makefile.in (TSOBS): Remove.
(INIT_FILES): Update.
(LIBGDB_OBS): Update.
(COMMON_SFILES): Add inflow.c.
(SFILES): Remove inflow.c.
------------------------------------------------------------------------------
(gdb) help save gdb-index
Save a gdb-index file.
Usage: save gdb-index [-dwarf-5] DIRECTORY
No options create one file with .gdb-index extension for pre-DWARF-5
compatible .gdb_index section. With -dwarf-5 creates two files with
extension .debug_names and .debug_str for DWARF-5 .debug_names section.
------------------------------------------------------------------------------
But gdb-add-index command provided no way how to pass the -dwarf-5 option.
gdb/ChangeLog
2018-07-07 Jan Kratochvil <jan.kratochvil@redhat.com>
* contrib/gdb-add-index.sh ($dwarf5): New, use it.
