Change OBJ_COFF checks to check OBJ_XCOFF instead.
(TARGET_FORMAT): Fully parenthesize.
(LEX_QM): Define if TE_PE.
* config/tc-ppc.c: Replace OBJ_COFF by OBJ_XCOFF throughout.
Remove checks of TE_PE within #ifdef OBJ_XCOFF sections.
(init_regtable): Make i unsigned.
(ppc_set_current_section): Rename from setCurrentSection. Change
all callers.
(ppc_arch): Return after as_fatal to avoid gcc warning.
(md_assemble): Only declare reloc if OBJ_ELF. Add default to
switch on fixups[i].reloc to avoid gcc warning.
(IMAGE_SGN_LNK_OTHER): Fix nested comment.
(ppc_pe_function): Don't call ppc_canonicalize_symbol_name.
(ppc_frob_symbol): Remove TE_PE section checks.
(md_estimate_size_before_relax): Return after abort to avoid gcc
warning.
(md_apply_fix3): Add BFD_RELOC_16_GOT_PCREL to switch.
* read.c (LEX_QM): Define as 0 if not defined.
(lex_type): Use LEX_QM for '?'.
and rightstop to not be const.
(parse_mri_control_expression): Likewise.
(build_mri_control_operand): Likewise. Use m68k_ip_op to examine
the operand, not m68k_reg_parse.
(s_mri_if): In MRI mode, stop at the first '*'.
(s_mri_while): Likewise.
(s_mri_else): In MRI mode, ignore trailing characters.
(s_mri_endi, s_mri_break, s_mri_next, s_mri_for): Likewise.
(s_mri_endf, s_mri_repeat, s_mri_until, s_mri_endw): Likewise.
* config/m68k-parse.y: Revert yesterday's change.
* config/m68k-parse.h: Revert yesterday's change.
and rightstart to not be const.
(parse_mri_control_expression): Likewise.
(build_mri_control_operand): Likewise. If the left side of the
comparison is a register, and the right side is not, swap the two
sides.
* config/m68k-parse.y (m68k_reg_parse): Make globally visible.
* config/m68k-parse.h (m68k_reg_parse): Declare.
sym-sym case.
* config/obj-coff.c (fixup_segment): Likewise. Permit negative
symbols if TC_M68K.
* config/tc-m68k.c (tc_coff_fix2rtype): If fx_tcbit is set, return
R_RELLONG_NEG.
(tc_gen_reloc): If fx_tcbit is set, abort.
(md_apply_fix_2): For a negative reloc, move fx_subsy to fx_addsy,
and set fx_tcbit.
Permits generating negative relocs for m68k COFF.
relaxing, in case md_convert_frag, called by cvt_frag_to_fill,
wants to call fix_new.
* config/tc-m68k.c (m68k_ip): Permit PC relative code if the
segment of the symbol is the current segment, not just in
text_section.
(md_convert_frag_1): Don't call subseg_change.
(md_estimate_size_before_relax): Likewise.
statement inside a quotation.
(s_space): Don't warn about a zero repeat count in MRI mode.
* config/tc-m68k.c (crack_operand): In MRI mode, don't count
parentheses inside quotes.
(md_assemble): In MRI mode, anything after the operands field is a
comment.
(parse_mri_control_operand): Adjust start and stop to remove
spaces.
(s_mri_for): Likewise.
* as.c: Include sb.h and macro.h.
(max_macro_next): New global variable.
(main): Call macro_init.
(macro_expr): New static function.
* as.h (max_macro_nest): Declare.
* read.c (line_label): Rename from mri_line_label. Change all
uses.
(potable): Add exitm, irp, irpc, macro, mexit, rept.
(read_a_source_file): Always clear line_label at the start of a
line, not just when flag_mri or LABELS_WITHOUT_COLONS. Fixup
MRI/LABELS_WITHOUT_COLONS handling. In MRI mode, permit label:
equ val. Set line_label when calling colon. In MRI mode, a
leading '.' does not imply a pseudo-op. Check for macro expansion
before calling md_assemble.
(s_irp): New function.
(get_line_sb): New static function.
(s_macro): New function.
(s_mexit): New function.
(s_rept): New function.
* read.h (line_label): Rename from mri_line_label.
(s_irp, s_rept): Declare.
(s_macro, s_mexit): Declare.
* input-scrub.c: Include sb.h.
(sb_index, from_sb): New static variables.
(macro_nest): New static variable.
(struct input_save): Add sb_index and from_sb fields. Change
next_saved_file field to be struct input_save *.
(next_saved_file): Changed to be struct input_save *.
(input_scrub_push): Change to return type struct input_save *.
Save sb_index and from_sb.
(input_scrub_pop): Change parameter type to struct input_save *.
Restore sb_index and from_sb.
(input_scrub_include_sb): New function.
(input_scrub_next_buffer): Handle reading from from_sb.
(bump_line_counters): Only increment lines if not using from_sb.
* config/tc-m68k.c (opt_table): Add nest.
(opt_nest): New static function.
* gasp.c: Include sb.h and macro.h. Move all sb related functions
and definitions to sb.h and sb.c. Move all macro related
functions and definitions to macro.h and macro.c.
* sb.h, sb.c: New files, extracted from gasp.c.
* macro.h, macro.c: Likewise.
* Makefile.in (OBJS): Add sb.o and macro.o
(GASPOBJS): Define.
(gasp.new): Depend upon $(GASPOBJS). Use $(GASPOBJS) to link.
(TARG_CPU_DEP_m68k): Depend upon subsegs.h.
(gasp.o): Depend upon sb.h and macro.h.
(sb.o): New target.
(macro.o): New target.
(as.o): Depend upon sb.h and macro.h.
(input-scrub.o): Depend upon sb.h.
(read.o): Depend upon sb.h and macro.h.
(m68k_ip): Pass 64 rather than -1 to add_Fix in 'B' 'B' case.
(md_pcrel_from): If fx_pcrel_adjust is 64, use -1 instead.
You can't portably store negative numbers in a char.
"begin_brtab" and "end_brtab" pseudo-ops.
(pa_brtab): New function.
(tc_gen_reloc, SOM version): Handle R_BEGIN_BRTAB and R_END_BRTAB.
(hppa_force_relocation): Force relocations for BRTAB fixups
when OBJ_SOM is defined.
More infrastructure for PA optimziations.
iword rather than expr8 and expr16. When recognizing 'M', use
issbyte rather than expr8. When recognizing 'Q' and 't', just
check for O_constant rather than using expr8.
* config/m68k-parse.h (expr8, expr16): Don't define.
* Makefile.in (m68k-parse.o): Depend upon m68k-parse.h, not
m68k-parse.y.
(m68k_quick): New static variable.
(m68k_rel32): New static variable.
(md_pseudo_table): Add opt and reg.
(m68k_ip): Permit absolute symbols in 'l'/'L' recognition. Check
m68k_quick in 'M' and 'Q' recognition. Check m68k_abspcadd in
DISP handling. Check m68k_rel32 in BASE/POST/PRE handling.
(md_begin): In MRI mode, initialize m68k_abspcadd and m68k_rel32.
In MRI mode, change unsized branch aliases to be variable sized.
(struct opt_action): Define.
(opt_table): Define.
(s_opt): New static function.
(skip_to_comma): New static function.
(opt_chip): New static function.
(opt_list): New static function.
(opt_list_symbols): New static function.
(s_reg): New static function.
* as.h (flag_keep_locals): Change from unsigned char to int.
(flag_no_warnings): Likewise.
(md_pseudo_table): Add fopt and mask2.
(m68k_ip): Use m68k_float_copnum, not COPNUM, when setting
coprocessor register to use. In case 'I' when checking operands,
correct coprocessor register numbers. In case 'I' when setting
operands, don't add 1.
(s_fopt): New static function.
* config/m68k-parse.h (COPNUM): Don't define.
68ec020, 68ec030, 68ec040, and 68330.
(md_pseudo_table): Add chip and comline.
(m68k_init_after_args): Use strcasecmp when comparing default_cpu
against architectures.
(mri_chip, s_chip): New static functions.
* read.h (mri_comon_symbol): Declare.
(s_mri_common): Declare.
* read.c (mri_line_label): New static variable.
(mri_common_symbol): New global variable.
(potable): Add "common" and "common.s".
(read_a_source_file): In MRI mode, set mri_line_label for a label
at the start of a line.
(s_mri_common): New function.
(s_space): Handle mri_common_symbol.
* symbols.c (colon): Change return value from void to symbolS *,
and return new symbol. If mri_common_symbol is set, attach the
new symbol to it.
(resolve_symbol_value): Handle an sy_mri_common symbol.
* symbols.h (colon): Change return value in declaration.
* subsegs.c (subseg_set_rest): Clear mri_common_symbol.
(subseg_set (both versions)): Likewise.
* frags.c (frag_more): Warn if mri_common_symbol is not NULL.
* write.c (adjust_reloc_syms): Skip sy_mri_common symbols.
(write_object_file): Discard sy_mri_common symbols.
(fixup_segment): Change relocations against sy_mri_common symbols
to be against the common symbol itself.
* config/obj-coff.c (yank_symbols): Discard sy_mri_common symbols.
(fixup_segment): Change relocations against sy_mri_common symbols
to be against the common symbol itself.
* config/obj-aout.c (obj_crawl_symbol_chain): Discard
sy_mri_common symbols.
including support for Motorola syntax.
* config/m68k-parse.h: New file; definitions shared between
m68k-parse.y and tc-m68k.c.
* config/tc-m68k.c: Include m68k-parse.h.
(enum operand_type): Move to m68k-parse.h, where it is named
m68k_operand_type. Rename all uses. Rearrange somewhat. Add
FPREG. Rename AOFF to DISP. Rename AINDX to BASE. Rename APODX
to POST. Rename APRDX to PRE. Remove AMIND. Rename MSCR to
CONTROL. Remove DINDR.
(struct m68k_exp): Move to m68k-parse.h. Remove e_beg, e_end and
e_seg fields. Rename e_exp to exp. Rename e_siz to size, and
change type to enum m68k_size. Change all uses.
(enum _register): Move to m68k-parse.h, where it is named
m68k_register. Rename all uses. Add ZDATA0-7 and ZADDR0-7.
(struct m68k_op): Move to m68k-parse.h. Change all fields.
(seg): Don't define.
(add_exp): Remove.
(FAIL, OK): Remove.
(m68k_reg_parse): Move to m68k-parse.y, and rewrite.
(SKIP_WHITE, SKIP_W): Remove.
(try_moto_index, try_index): Remove.
(m68k_ip_op): Move to m68k-parse.y, and rewrite to use grammar.
(main): Remove obsolete test function.
(m68k_ip): Extensive changes to use new grammar.
(get_regs): Remove.
(crack_operand): m68k_ip_op now returns 0 on success.
(init_table): Add ssp, zd0-7 and za0-7.
(md_assemble): Make er const. Correct loop over operands when
looking for error message.
(md_begin): Set alt_notend_table for '(' and '@'.
(get_num): Expression is already parsed. Don't set seg.
* configure.in: If cpu_type is m68k, put m68k-parse.o in
extra-objects.
* configure: Rebuild.
* Makefile.in (DISTSTUFF): Add m68k-parse.c.
(BISON): Use ../bison/bison if it exists.
(BISONFLAGS): Define as empty.
(TARG_CPU_DEP_m68k): Depend upon $(srcdir)/config/m68k-parse.h.
(m68k-parse.c, m68k-parse.o): New targets.
