These targets use the ELF format according to `bfd/config.bfd'.
binutils/
* testsuite/lib/binutils-common.exp (is_elf_format): Also return
1 for `*-*-lynxos*' and `*-*-symbianelf*' targets.
Fixes these fails:
nds32le-linux +FAIL: binutils-all/strip-14
nds32le-linux +FAIL: binutils-all/strip-15
pru-elf +FAIL: binutils-all/strip-14
pru-elf +FAIL: binutils-all/strip-15
strip-13 fails on nds32 due to an assertion failure and out of bounds
access to nds32_elf_howto_table.
* testsuite/binutils-all/objcopy.exp (strip-14, strip-15): Choose
reloc=11 for pru and reloc=50 for nds32.
* testsuite/binutils-all/strip-15.d: Accept 0xb reloc number.
Verify that `strip' completes successfully and a correct relocation
entry is copied for a relocation encountered with the STN_UNDEF symbol
index.
binutils/
* testsuite/binutils-all/strip-15.d: New test.
* testsuite/binutils-all/strip-15rel.s: New test source.
* testsuite/binutils-all/strip-15rela.s: New test source.
* testsuite/binutils-all/strip-15mips64.s: New test source.
* testsuite/binutils-all/objcopy.exp: Run the new test.
Verify that `strip' terminates gracefully and a correct error message is
produced for a relocation encountered with an invalid symbol index. No
single relocation number is valid across all targets we support, so pick
a few numbers to choose from depending on the target.
binutils/
* testsuite/binutils-all/strip-14.d: New test.
* testsuite/binutils-all/strip-14rel.s: New test source.
* testsuite/binutils-all/strip-14rela.s: New test source.
* testsuite/binutils-all/strip-14mips64.s: New test source.
* testsuite/binutils-all/objcopy.exp: Run the new test.
I happened to notice that objdump was not printing "Rust" when showing
the DW_AT_language for a CU:
<10> DW_AT_language : 28 (Unknown: 1c)
This patch adds all the new language constants from DWARF 5 to
binutils/dwarf.c.
2018-04-06 Tom Tromey <tom@tromey.com>
* dwarf.c (read_and_display_attr_value): Add missing DW_LANG
constants from DWARF 5.
config/plugins.m4 has
if test "$plugins" = "yes"; then
AC_SEARCH_LIBS([dlopen], [dl])
fi
Plugin uses dlsym, but libasan.so only intercepts dlopen, not dlsym:
[hjl@gnu-tools-1 binutils-text]$ nm -D /lib64/libasan.so.4| grep " dl"
0000000000038580 W dlclose
U dl_iterate_phdr
000000000004dc50 W dlopen
U dlsym
U dlvsym
[hjl@gnu-tools-1 binutils-text]$
Testing dlopen for libdl leads to false negative when -fsanitize=address
is used. It results in link failure:
../bfd/.libs/libbfd.a(plugin.o): undefined reference to symbol 'dlsym@@GLIBC_2.16'
dlsym should be used to check if libdl is needed for plugin.
bfd/
PR gas/22318
* configure: Regenerated.
binutils/
PR gas/22318
* configure: Regenerated.
gas/
PR gas/22318
* configure: Regenerated.
gprof/
PR gas/22318
* configure: Regenerated.
ld/
PR gas/22318
* configure: Regenerated.
Fix a typo: `.dc.w' -> `.dc.l' in `strip-13mips64.s', correcting a bug
from commit 2f8ceb3899 ("binutils/testsuite: Support REL and MIPS64
reloc formats with `strip-13'"). For relocation format correctness only
as there is no observable change in test results due to the lack of
connection between the second relocation entry affected and the examined
error message produced.
binutils/
* testsuite/binutils-all/strip-13mips64.s: Use `.dc.l' rather
than `.dc.w' in second relocation.
Avoid false positives and actually verify both that an `unsupported
relocation type 0x8f' message is produced and that no other message is,
except for the final `bad value', in the `strip-13' test. This ensures
that it is a relocation processing error and not a different issue that
has caused `strip' to terminate unsuccessfully, and that the number
representing the unsupported relocation has not been clobbered.
binutils/
* testsuite/binutils-all/strip-13.d: Also expect `unsupported
relocation type 0x8f' error message.
Add source variants for the `strip-13' test that produce relocations in
the REL and MIPS64 formats, fixing a failure for the `mips64el-openbsd'
target. This also corrects output for `i*86-*', `i960-*', `m6812-*' and
`m68hc12-*', o32 `mips*-*', and `score*-*' targets, which however does
not show up as a test result change due to lax error message matching
causing `bad value' previously produced by `strip' as a result of input
file rejection to be accepted as a test pass.
For `m6811-*' aka `m68hc11-*' targets this causes a phantom regression,
because they use 16-bit addressing and therefore `.dc.a' emits 16-bit
quantities causing relocation data constructed in assembly not to be as
expected. Previously input was rejected by `strip' with a `bad value'
message and now it is accepted, however due to the relocation data error
the relocation number is not one of the unsupported ones and the tool
completes successfully, which scores as a test failure.
Disable the test case for `m6811-*' and `m68hc11-*' targets then, as it
is a test case bug rather than a problem with the relevant backend. A
separate change to the test case is required to correct this problem, at
which point the test case can be enabled for the affected targets.
binutils/
* testsuite/binutils-all/strip-13.s: Rename to...
* testsuite/binutils-all/strip-13rela.s: ... this.
* testsuite/binutils-all/strip-13rel.s: New test source.
* testsuite/binutils-all/strip-13mips64.s: New test source.
* testsuite/binutils-all/strip-13.d: Remove `arm-*', `d10v-*',
`dlx-*' and `xgate-*' from `not-target' list. Add `m6811-*' and
`m68hc11-*' to `not-target' list.
* testsuite/binutils-all/objcopy.exp: Switch between sources for
`strip-13'.
Based on relocations defined in include/elf/*.h files we have relocation
numbers: 143, 159, 214 and 215 currently not used by any of our ELF
targets. Use 143 then instead of 241 to enable the `strip-13' test for
`hppa*-*' targets. It has a side effect with some targets of verifying
that unused relocations whose numbers are below the respective R_*_max
value are handled correctly.
binutils/
* testsuite/binutils-all/strip-13.s: Use 143 (0x8f) rather than
241 (0xf1) for the relocation number and RELA addend.
* testsuite/binutils-all/strip-13.d: Remove `hppa*-*' from the
`not-target' list.
* readelf.c (get_symbol_for_build_attribute): Skip ARM mapping
symbols.
(print_gnu_build_attribute_description): If no file start symbol
could be found, look for one two bytes into the file.
* testsuite/binutils-all/note-4-64.s: Set the address of the file
start symbol to two bytes into the file.
* testsuite/binutils-all/note-4-32.s: Likewise.
The following bits in DT_FLAGS_1 are used by Solaris:
#define DF_1_KMOD 0x10000000 /* kernel module */
#define DF_1_WEAKFILTER 0x20000000 /* apply weak binding to DT_FILTER */
#define DF_1_NOCOMMON 0x40000000 /* no COMMON symbols exist */
binutils/
* readelf.c (process_dynamic_section): Also dump DF_1_KMOD,
DF_1_WEAKFILTER and DF_1_NOCOMMON.
include/
* elf/common.h (DF_1_KMOD): New.
(DF_1_WEAKFILTER): Likewise.
(DF_1_NOCOMMON): Likewise.
PR 22955
* stabs.c (parse_number): Add p_end parameter and use it to check
the validity of the pp parameter. Add checks to prevent walking
off the end of the string buffer.
(parse_stab_string): Likewise.
(parse_stab_type): Likewise.
(parse_stab_type_number): Likewise.
(parse_stab_range_type): Likewise.
(parse_stab_sun_builtin_type): Likewise.
(parse_stab_sun_floating_type): Likewise.
(parse_stab_enum_type): Likewise.
(parse_stab_struct_type): Likewise.
(parse_stab_baseclasses): Likewise.
(parse_stab_struct_fields): Likewise.
(parse_stab_cpp_abbrev): Likewise.
(parse_stab_one_struct_field): Likewise.
(parse_stab_members): Likewise.
(parse_stab_tilde_field): Likewise.
(parse_stab_array_type): Likewise.
* parse_stab: Compute the end of the string and then pass it on to
individual parser functions.
xcoff (32-bit) objdump accepted but ignored -M options unless
-mpowerpc was also given. This patch fixes that, leaving the default
as -Mpwr for xcoff. I've also enabled more tests for xcoff targets.
binutils/
* configure.ac: Add objdump_private_desc_xcoff for rs6000.
* configure: Regenerate.
gas/
* testsuite/gas/ppc/aix.exp: Run for rs6000 too.
* testsuite/gas/ppc/ppc.exp: Run more tests for non-ELF targets.
* testsuite/gas/ppc/machine.d: Don't run for PE targets.
opcodes/
* disassemble.c (disassembler): Use bfd_arch_powerpc entry for
bfd_arch_rs6000.
* disassemble.h (print_insn_rs6000): Delete.
* ppc-dis.c (powerpc_init_dialect): Handle rs6000.
(disassemble_init_powerpc): Call powerpc_init_dialect for rs6000.
(print_insn_rs6000): Delete.
Replace linear search with binary search on dynamic relocations. After
finding a match, scan backward to the first matching relocation, then
scan forward for a matching relocation with non-absolute symbol.
On Fedora 27 x86-64, time for "objdump -d" on libxul.so from RHEL 7.4
x86-64 went from
134.46user 0.12system 2:15.03elapsed
to
8.49user 0.14system 0:08.64elapsed
PR binutils/22911
* objdump.c (is_significant_symbol_name): Return TRUE for all
.plt* sections.
(find_symbol_for_address): Replace linear search with binary
search on dynamic relocations.
This fixes the case where all of a group is removed with ld -r, the
situation in the PR, and failures where part of a group is removed
that contain relocs.
bfd/
PR 22836
* elf.c (_bfd_elf_fixup_group_sections): Account for removed
relocation sections. If size reduces to just the flag word,
remove that too and mark with SEC_EXCLUDE.
* elflink.c (bfd_elf_final_link): Strip empty group sections.
binutils/
* testsuite/binutils-all/group-7.s,
* testsuite/binutils-all/group-7a.d,
* testsuite/binutils-all/group-7b.d,
* testsuite/binutils-all/group-7c.d: New tests.
* testsuite/binutils-all/objcopy.exp: Run them.
ld/
* testsuite/ld-elf/pr22836-2.d,
* testsuite/ld-elf/pr22836-2.s: New test.
PR 22793
* readelf.c (find_section): Replace assertion with test and return
of NULL.
(find_section_by_address): Add test of section header table
existance.
(find_section_by_type): Likewise.
(find_section_in_set): Likewise.
Report an error when an unsupported `.reginfo' section size is found in
`_bfd_mips_elf_section_processing', removing an assertion that triggers
at elfxx-mips.c:7105 in GAS when assembling input like:
.section .reginfo
.word 0xdeadbeef
and in `objcopy --rename-section' when renaming an incorrectly sized
section to `.reginfo'.
bfd/
* elfxx-mips.c (_bfd_mips_elf_section_processing): For
SHT_MIPS_REGINFO sections don't assert the correct size and
report an error instead.
binutils/
* testsuite/binutils-all/mips/mips-reginfo.d: New test.
* testsuite/binutils-all/mips/mips-reginfo-n32.d: New test.
* testsuite/binutils-all/mips/mips-reginfo.s: New test source.
* testsuite/binutils-all/mips/mips.exp: Run the new tests.
gas/
* testsuite/gas/mips/reginfo-2.d: New test.
* testsuite/gas/mips/reginfo-2-n32.d: New test.
* testsuite/gas/mips/reginfo-2.l: New test stderr output.
* testsuite/gas/mips/reginfo-2.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
Add support for the `error', `error_output', `warning' and
`warning_output' options for `run_dump_test' input files, based on the
version of the procedure in ld/testsuite/lib/ld-lib.exp and providing
compatible semantics. These options apply to PROG under test and let
test cases specify output expected on stderr as well as express a
requirement for PROG to exit unsuccessfully. Messages to match against
can be supplied either inline or fetched from a named file. Update
procedure description in the introductory comment accordingly.
As the exit status from `remote_exec' is regrettably lost in our default
implementation of `binutils_run', which is user-overridable, avoid
changing this procedure's API and use a global `binutils_run_status'
variable to pass the status up to the caller, similarly to how
`binutils_run_failed' is handled. Document the new variable in the
respective introductory comments.
binutils/
* testsuite/config/default.exp (binutils_run): Document
`binutils_run_status'.
* testsuite/lib/utils-lib.exp (default_binutils_run): Likewise,
and set it.
(run_dump_test): Add `error', `error_output', `warning' and
`warning_output' options. Update documentation accordingly.
Adds a register name table for RiscV so that objdump and readelf can
both use better register names.
binutils/ChangeLog:
* dwarf.c (dwarf_regnames_riscv): New register name table.
(init_dwarf_regnames_riscv): New function.
(init_dwarf_regnames): Add call to initialise RiscV register
names.
* dwarf.h (init_dwarf_regnames_riscv): Declare.
* objdump.c (dump_dwarf): Add call to initialise RiscV register
names.
PR 22734
* doc/binutils.texi (nm): Update description to point out that
zero-initialized values can also be shown as type B, b, S or s
since they can be stored in the BSS section.
Following my recent transition from Imagination Technologies to the
reincarnated MIPS company update MAINTAINERS entries accordingly.
binutils/
* MAINTAINERS: Update my company e-mail address.
gdb/
* MAINTAINERS: Update my company e-mail address.
sim/
* MAINTAINERS: Update my company e-mail address.
. * config-ml.in: Sync with gcc sources.
* config.guess: Likewise.
* config.sub: Likewise.
* configure.ac: Likewise.
* configure: Regenerate.
config * Sync with GCC sources:
2017-11-14 Boris Kolpackov <boris@codesynthesis.com>
* gcc-plugin.m4: Add support for MinGW.
2017-11-17 Igor Tsimbalist <igor.v.tsimbalist@intel.com>
* cet.m4: New file.
2017-11-15 Alexandre Oliva <aoliva@redhat.com>
* bootstrap-debug-lean.mk (do-compare): Use the
contrib/compare-debug script.
2017-10-24 H.J. Lu <hongjiu.lu@intel.com>
* bootstrap-cet.mk: New file.
2017-06-19 Martin Liska <mliska@suse.cz>
* bootstrap-lto-noplugin.mk: Enable -flto in all PGO stages.
* bootstrap-lto.mk: Likewise.
2017-06-03 Eric Botcazou <ebotcazou@adacore.com>
* mt-android: New file.
2017-02-13 Richard Biener <rguenther@suse.de>
* isl.m4: Remove support for ISL 0.14.
2017-01-19 Uros Bizjak <ubizjak@gmail.com>
PR target/78478
* ax_check_define.m4: New file.
2017-01-17 Jakub Jelinek <jakub@redhat.com>
PR other/79046
* acx.m4 (GCC_BASE_VER): New m4 function.
(ACX_TOOL_DIRS): Require GCC_BASE_VER, for
--with-gcc-major-version-only use just major number from BASE-VER.
2017-01-06 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
PR go/78978
* hwcaps.m4 (GCC_CHECK_ASSEMBLER_HWCAP): New macro.
I am checking in the attached patch which updates the binutils
support for version 3 binary annotation notes. (Version 3 adds
an end address to the ranges covered by the notes, so that it
is possible to detect gaps in the coverage).
This patch also stops the note merging feature of objcopy from
executing if the notes have relocations against them. This makes the
code simpler, and prevents the problems with architectures which have
unusual relocation management issues.
* objcopy.c (objcopy_internal_note): New structure.
(gap_exists): New function.
(is_open_note): New function.
(is_func_note): New function.
(is_64bit): New function.
(merge_gnu_build_notes): Handle v3 notes. Do not merge
if there are relocations against the notes.
* readelf.c (get_note_type): Use short names for build attribute
notes.
(print_symbol_for_build_attribute): Rename to
get_symbol_for_build_attribute. Returns the found symbol rather
than printing it.
(print_gnu_build_attribute_description): Maintain address ranges
for function notes as well as global notes. Handle v3 notes.
(print_gnu_build_attribute_name): Use more space for printing the
name in wide mode.
* testsuite/binutils-all/note-2-32.s: Use .dc.l instead of .word.
Eliminate symbol references in order to remove the need for
relocations.
* testsuite/binutils-all/note-2-64.s: Likewise.
* testsuite/binutils-all/note-3-32.s: Add a size to the note_1
symbol.
* testsuite/binutils-all/note-3-64.s: Likewise.
* testsuite/binutils-all/mips/mips-note-2r-n32.d: Update expected
output.
* testsuite/binutils-all/mips/mips-note-2r-n64.d: Likewise.
* testsuite/binutils-all/mips/mips-note-2r.d: Likewise.
* testsuite/binutils-all/note-2-32.d: Likewise.
* testsuite/binutils-all/note-2-64.d: Likewise.
* testsuite/binutils-all/note-3-32.d: Likewise.
* testsuite/binutils-all/note-3-64.d: Likewise.
* testsuite/binutils-all/note-4-64.s: New test. Checks v3 notes.
* testsuite/binutils-all/note-4-32.s: New test.
* testsuite/binutils-all/note-4-64.d: New test result file.
* testsuite/binutils-all/note-4-32.d: New test result file.
PR 22587
* readelf.c (process_section_headers): Do not complain about an
sh_info field of 0 in relocation sections of ET_EXEC or ET_DYN
type executables.
This is a followup to "binutils nm testsuite tidy". Since the perror
in binutils_assemble has been removed, we need to take more care in
failure paths.
The patch also fixed a number of .exp files that have multiple tests,
where an assembly failure returns from the .exp file. In most cases
it is nicer to attempt all tests.
* testsuite/binutils-all/ar.exp (unique_symbol): Don't run AR
if assembly fails.
* testsuite/binutils-all/arc/objdump.exp (check_assembly): If
objfile is empty, fail test.
* testsuite/binutils-all/arm/objdump.exp: Don't return if assembly
fails for a test, continue on to other tests.
* testsuite/binutils-all/bfin/objdump.exp: Likewise.
* testsuite/binutils-all/hppa/objdump.exp: Likewise.
* testsuite/binutils-all/m68k/objdump.exp: Likewise.
* testsuite/binutils-all/vax/objdump.exp: Likewise.
* testsuite/binutils-all/size.exp: Likewise.
* testsuite/binutils-all/nm.exp: Likewise. Move PR12753 test.
* testsuite/binutils-all/objcopy.exp: Don't perror on assembly fail.
* testsuite/binutils-all/objdump.exp: Report assembly fails.
PR 22532
* dwarf.c (read_and_display_attr_value): Add attributes that might
use the DW_FORM_exprloc form, and if so, display the decoded
location expression list.
We can run the gnu_unique_object symbol test on all ELF targets.
Those that don't support the symbol type and fail to assemble can just
be resolved as "unsupported". This means binutils_assemble can't
report an error on assembly failure, but it probably should never have
done that anyway.
* testsuite/lib/utils-lib.exp (default_binutils_assemble_flags):
Don't perror on assembler diagnostic output.
* testsuite/binutils-all/nm.exp: Run unique symbol test on all
ELF targets. Resolve as "unsupported" on assembly failure.
When checking mapping symbols backwardly, the section which defines the symbol
is not considerted. This patch fixes this by moving the section checking code
into get_sym_code_type () function which is shared by forward and backword
mapping symbol searching.
opcodes/
2017-12-11 Petr Pavlu <petr.pavlu@arm.com>
Renlin Li <renlin.li@arm.com>
* aarch64-dis.c (print_insn_aarch64): Move symbol section check ...
(get_sym_code_type): Here.
binutils/
2017-12-11 Renlin Li <renlin.li@arm.com>
* testsuite/binutils-all/aarch64/objdump.d: New.
* testsuite/binutils-all/aarch64/objdump.s: New.
A recent Fedora bug (1520805) exposed a problem with objcopy's reloc
copying code, when a binary also contains mergeable notes. The note
merging code would delete some relocs, but then the reloc copying code
would try to put them back again, which did not work.
So I am checking in the patch below to fix the problem. The patch
also tweaks one of the binutils note merging tests so that it is
skipped for the Sparc64 target, since this has funky relocs.
binutils * objcopy.c (copy_relocations_in_section): Use the orelocations
field of the input section, if it has been initialised.
* testsuite/binutils-all/note-2-64.d: Skip test on Sparc64.
bfd * elfcode.h (elf_write_relocs): Check for an empty howto field.
PR 22465
binutils/
* objcopy.c (copy_section): New local extra. If isection->lma not
exactly divisible by interleave, then bias from. Also adjust
osection->lma if necessary.
ld/
* testsuite/ld-elf/interleave-0.d, testsuite/ld-elf/interleave-4.d,
* testsuite/ld-elf/interleave.ld, testsuite/ld-elf/interleave.s: New.
PR 22552
* readelf.c (process_file_header): Don't assume XINDEX case
value for e_shstrndx is within bounds.
(load_debug_section): Sanity test e_shstrndx before attempting
to read .shstrtab. Wrap long lines.
PR 22508
* objdump.c (dump_relocs_in_section): Also check the section's
relocation count to make sure that it is reasonable before
attempting to allocate space for the relocs.
bfd/
* po/Make-in (datadir): Define as @datadir@.
(localedir): Define as @localedir@.
(gnulocaledir, gettextsrcdir): Use @datarootdir@.
binutils/
* po/Make-in (datadir): Define as @datadir@.
(localedir): Define as @localedir@.
(gnulocaledir, gettextsrcdir): Use @datarootdir@.
gas/
* po/Make-in (datadir): Define as @datadir@.
(localedir): Define as @localedir@.
(gnulocaledir, gettextsrcdir): Use @datarootdir@.
gold/
* po/Make-in (datadir): Define as @datadir@.
(localedir): Define as @localedir@.
(gnulocaledir, gettextsrcdir): Use @datarootdir@.
gprof/
* po/Make-in (datadir): Define as @datadir@.
(localedir): Define as @localedir@.
(gnulocaledir, gettextsrcdir): Use @datarootdir@.
ld/
* po/Make-in (datadir): Define as @datadir@.
(localedir): Define as @localedir@.
(gnulocaledir, gettextsrcdir): Use @datarootdir@.
opcodes/
* po/Make-in (datadir): Define as @datadir@.
(localedir): Define as @localedir@.
(gnulocaledir, gettextsrcdir): Use @datarootdir@.
When dumping notes, get note alignment from either note section or note
segment. To support notes generated by assemblers with
https://sourceware.org/bugzilla/show_bug.cgi?id=22492
we treate alignment as 4 bytes if it is less than 4. Otherwise, we skip
notes if alignment isn't 4 nor 8 bytes.
We should call load_separate_debug_file only if e_shstrndx != SHN_UNDEF.
PR binutils/22490
* readelf.c (process_notes_at): Add an argument for note
alignment. If note alignment is less than 4, use 4 byte
alignment. Otherwise, skip notes if alignment isn't 4 nor
8 bytes.
(process_corefile_note_segments): Pass segment alignment to
process_notes_at.
(process_note_sections): Pass section alignment to
process_notes_at.
(process_object): Call load_separate_debug_file only if
e_shstrndx != SHN_UNDEF.
PR 22490
* readelf.c (dump_section_as_bytes): Check for a NULL string
section pointer.
(process_notes_at): Compute the alignment to use if displaying
notes from a segment.
This fixed the build with GCC 4.2:
cc1: warnings being treated as errors
binutils-gdb/binutils/dwarf.c: In function ‘load_separate_debug_info’:
binutils-gdb/binutils/dwarf.c:9650: warning: declaration of ‘link’ shadows a global declaration
/usr/include/unistd.h:757: warning: shadowed declaration is here
* dwarf.c (load_separate_debug_info): Rename argument name from
link to xlink.
CORE PT_NOTE segments may have p_align values of 0 or 1. gABI specifies
that PT_NOTE alignment should be aligned to 4 bytes for 32-bit objects
and to 8 bytes for 64-bit objects. If segment alignment is less than 4,
we use 4 byte alignment.
This reverts commit 650444eb54.
With this patch, running the GDB test case gdb.base/auxv.exp is stuck in
an infinite loop, consuming memory to the point that it renders the
machine unusable. I am reverting it so we can take our time to
investigate while not killing all the developers' machines.
According to gABI, in a note entry, the note name field, not note name
size, is padded for the note descriptor. And the note descriptor field,
not note descriptor size, is padded for the next note entry. Also notes
are aligned to 4 bytes in 32-bit objects and 8 bytes in 64-bit objects.
Since on Linux, .note.ABI-tag and .note.gnu.build-id notes are always
aligned to 4 bytes, we need to use alignment of note section or note
segment, instead of assuming alignment based on ELF file class.
Tested on i686 and x86-64.
bfd/
PR binutils/22444
* elf.c (elf_read_notes): Add an argument for note aligment.
(elf_parse_notes): Likewise.
(_bfd_elf_make_section_from_shdr): Pass section aligment to
elf_parse_notes.
(bfd_section_from_phdr): Pass segment aligment to elf_read_notes.
(elf_parse_notes): Add an argument for note aligment. Use
ELF_NOTE_DESC_OFFSET to get the offset of the note descriptor.
Use ELF_NOTE_NEXT_OFFSET to get the offset of the next note
entry.
(elf_read_notes): Add an argument for note aligment and pass it
to elf_parse_notes.
binutils/
PR binutils/22444
* readelf.c (process_notes_at): Use ELF_NOTE_DESC_OFFSET to get
the offset of the note descriptor. Use ELF_NOTE_NEXT_OFFSET to
get the offset of the next note entry.
include/
PR binutils/22444
* elf/external.h (ELF_ALIGN_UP): New.
(ELF_NOTE_DESC_OFFSET): Likewise.
(ELF_NOTE_NEXT_OFFSET): Likewise.
Check in the object file generated from the older assembler as a
compressed file.
PR binutils/22451
* testsuite/binutils-all/x86-64/objects.exp: New file.
* testsuite/binutils-all/x86-64/pr22451.o.bz2: Likewise.
* dwarf.c (dwo_name, dwo_dir, dwo_id, dwo_id_len): New variables.
(read_and_display_attr_value): Record dwo variables if requested.
(display_augmentation_data): Rename to display_data and make
generic.
(load_dwo_file): New function. Loads a separate dwarf object
file.
(load_separate_debug_file): Add reporting and loading of separate
dwarf objet files.
* readelf.c (process_section_headers): Add do_debug_links to list
of flags requiring a debug dump.
(display_debug_section): Tidy up code.
* doc/debug.options.texi: Add note that dwo links will also be
followed.
* testsuite/binutils-all/debuglink.s: Tidy code.
* testsuite/binutils-all/dwo.s: New test file.
* testsuite/binutils-all/readelf.wk2: New file - expected output
from readelf.
* testsuite/binutils-all/readelf.exp: Run the new test.
Symbols like *ABS* defined in bfd/section.c:global_syms are not
elf_symbol_type. They can appear on relocs and perhaps other places
in an ELF bfd, so a number of places in nm.c and objdump.c are wrong
to cast an asymbol based on the bfd being ELF. I think we lose
nothing by excluding all section symbols, not just the global_syms.
PR 22443
* nm.c (sort_symbols_by_size): Don't attempt to access
section symbol internal_elf_sym.
(print_symbol): Likewise. Don't call bfd_get_symbol_version_string
for section symbols.
* objdump.c (compare_symbols): Don't attempt to access
section symbol internal_elf_sym.
(objdump_print_symname): Don't call bfd_get_symbol_version_string
for section symbols.
binutils/
* readelf.c (elf/riscv.h): Alphabetize include.
(is_32bit_inplace_add_reloc, is_32bit_inplace_sub_reloc)
(is_64bit_inplace_add_reloc, is_64bit_inplace_sub_reloc)
(is_16bit_inplace_add_reloc, is_16bit_inplace_sub_reloc)
(is_8bit_inplace_add_reloc, is_8bit_inplace_sub_reloc): New.
(apply_relocations): New locals reloc_inplace and reloc_subtract.
Call the new functions and set the new locals. Call byte_get if
reloc_inplace. Subtract sym->st_value if reloc_subtract.
--
This patch causes problems for glibc linknamespace tests because of how it
changes the output format of readelf on .a files.
Previously, "readelf -W -s libc.a" would produce output starting e.g.:
File: /scratch/jmyers/glibc/many8/build/glibcs/x86_64-linux-gnu/glibc/libc.a(init-first.o)
Symbol table '.symtab' contains 30 entries:
and continuing with symbol information for each object in that .a file.
After this commit, instead it starts:
File: /scratch/jmyers/glibc/many8/build/glibcs/x86_64-linux-gnu/glibc/libc.a
Symbol table '.symtab' contains 30 entries:
and every object's symbol information starts with the same File: line,
missing any information about which object's symbols (within libc.a) are
being listed.
I think the previous File: lines that said libc.a(init-first.o) etc.,
identifying the particular object within libc.a, were clearly preferable,
and the glibc linknamespace tests rely on having that information about
the individual object within libc.a.
--
binutils * readelf.c (process_archive): Include member name in the
file_name of the filedata structure.
Hi Guys,
I am applying the rather large patch attached to this email to enhance
the readelf and objdump programs so that they now have the ability to
follow links to separate debug info files. (As requested by PR
15152). So for example whereas before we had this output:
$ readelf -wi main.exe
Contents of the .debug_info section:
[...]
<15> DW_AT_comp_dir : (alt indirect string, offset: 0x30c)
[...]
With the new option enabled we get:
$ readelf -wiK main.exe
main.exe: Found separate debug info file: dwz.debug
Contents of the .debug_info section (loaded from main.exe):
[...]
<15> DW_AT_comp_dir : (alt indirect string, offset: 0x30c) /home/nickc/Downloads/dwzm
[...]
The link following feature also means that we can get two lots of
output if the same section exists in both the main file and the
separate debug info file:
$ readelf -wiK main.exe
main.exe: Found separate debug info file: dwz.debug
Contents of the .debug_info section (loaded from main.exe):
[...]
Contents of the .debug_info section (loaded from dwz.debug):
[...]
The patch also adds the ability to display the contents of debuglink
sections:
$ readelf -wk main.exe
Contents of the .gnu_debugaltlink section:
Separate debug info file: dwz.debug
Build-ID (0x14 bytes):
c4 a8 89 8d 64 cf 70 8a 35 68 21 f2 ed 24 45 3e 18 7a 7a 93
Naturally there are long versions of these options (=follow-links and
=links). The documentation has been updated as well, and since both
readelf and objdump use the same set of debug display options, I have
moved the text into a separate file. There are also a couple of new
binutils tests to exercise the new behaviour.
There are a couple of missing features in the current patch however,
although I do intend to address them in follow up submissions:
Firstly the code does not check the build-id inside separate debug
info files when it is searching for a file specified by a
.gnu_debugaltlink section. It just assumes that if the file is there,
then it contains the information being sought.
Secondly I have not checked the DWARF-5 version of these link
features, so there will probably be code to add there.
Thirdly I have only implemented link following for the
DW_FORM_GNU_strp_alt format. Other alternate formats (eg
DW_FORM_GNU_ref_alt) have yet to be implemented.
Lastly, whilst implementing this feature I found it necessary to move
some of the global variables used by readelf (eg section_headers) into
a structure that can be passed around. I have moved all of the global
variables that were necessary to get the patch working, but I need to
complete the operation and move the remaining, file-specific variables
(eg dynamic_strings).
Cheers
Nick
binutils PR 15152
* dwarf.h (enum dwarf_section_display_enum): Add gnu_debuglink,
gnu_debugaltlink and separate_debug_str.
(struct dwarf_section): Add filename field.
Add prototypes for load_separate_debug_file, close_debug_file and
open_debug_file.
* dwarf.c (do_debug_links): New.
(do_follow_links): New.
(separate_debug_file, separate_debug_filename): New.
(fetch_alt_indirect_string): New function. Retrieves a string
from the debug string table in the separate debug info file.
(read_and_display_attr_value): Use it with DW_FORM_GNU_strp_alt.
(load_debug_section_with_follow): New function. Like
load_debug_section, but if the first attempt fails, then tries
again in the separate debug info file.
(introduce): New function.
(process_debug_info): Use load_debug_section_with_follow and
introduce.
(load_debug_info): Likewise.
(display_debug_lines_raw): Likewise.
(display_debug_lines_decoded): Likewise.
(display_debug_macinfo): Likewise.
(display_debug_macro): Likewise.
(display_debug_abbrev): Likewise.
(display_debug_loc): Likewise.
(display_debug_str): Likewise.
(display_debug_aranges): Likewise.
(display_debug_addr); Likewise.
(display_debug_frames): Likewise.
(display_gdb_index): Likewise.
(process_cu_tu_index): Likewise.
(load_cu_tu_indexes): Likewise.
(display_debug_links): New function. Displays the contents of a
.gnu_debuglink or .gnu_debugaltlink section.
(calc_gnu_debuglink_ctc32):New function. Calculates a CRC32
value.
(check_gnu_debuglink): New function. Checks the CRC of a
potential separate debug info file.
(parse_gnu_debuglink): New function. Reads a CRC value out of a
.gnu_debuglink section.
(check_gnu_debugaltlink): New function.
(parse_gnu_debugaltlink): New function. Reads the build-id value
out of a .gnu_debugaltlink section.
(load_separate_debug_info): New function. Finds and loads a
separate debug info file.
(load_separate_debug_file): New function. Attempts to find and
follow a link to a separate debug info file.
(free_debug_memory): Free the separate debug info file
information.
(opts_table): Add "follow-links" and "links".
(dwarf_select_sections_by_letters): Add "k" and "K".
(debug_displays): Reformat. Add .gnu-debuglink and
.gnu_debugaltlink.
Add an extra entry for .debug_str in a separate debug info file.
* doc/binutils.texi: Move description of debug dump features
common to both readelf and objdump into...
* objdump.c (usage): Add -Wk and -WK.
(load_specific_debug_section): Initialise the filename field in
the dwarf_section structure.
(close_debug_file): New function.
(open_debug_file): New function.
(dump_dwarf): Load and dump the separate debug info sections.
* readelf.c (struct filedata): New structure. Contains various
variables that used to be global:
(current_file_size, string_table, string_table_length, elf_header)
(section_headers, program_headers, dump_sects, num_dump_sects):
Move into filedata structure.
(cmdline): New global variable. Contains list of sections to dump
by number, as specified on the command line.
Add filedata parameter to most functions.
(load_debug_section): Load the string table if it has not already
been retrieved.
(close_file): New function.
(close_debug_file): New function.
(open_file): New function.
(open_debug_file): New function.
(process_object): Process sections in any separate debug info files.
* doc/debug.options.texi: New file. Add description of =links and
=follow-links options.
* NEWS: Mention the new feature.
* elfcomm.c: Have the byte gte functions take a const pointer.
* elfcomm.h: Update prototypes.
* testsuite/binutils-all/dw5.W: Update expected output.
* testsuite/binutils-all/objdump.WL: Update expected output.
* testsuite/binutils-all/objdump.exp: Add test of -WK and -Wk.
* testsuite/binutils-all/readelf.exp: Add test of -wK and -wk.
* testsuite/binutils-all/readelf.k: New file.
* testsuite/binutils-all/objdump.Wk: New file.
* testsuite/binutils-all/objdump.WK2: New file.
* testsuite/binutils-all/linkdebug.s: New file.
* testsuite/binutils-all/debuglink.s: New file.
gas * testsuite/gas/avr/large-debug-line-table.d: Update expected
output.
* testsuite/gas/elf/dwarf2-11.d: Likewise.
* testsuite/gas/elf/dwarf2-12.d: Likewise.
* testsuite/gas/elf/dwarf2-13.d: Likewise.
* testsuite/gas/elf/dwarf2-14.d: Likewise.
* testsuite/gas/elf/dwarf2-15.d: Likewise.
* testsuite/gas/elf/dwarf2-16.d: Likewise.
* testsuite/gas/elf/dwarf2-17.d: Likewise.
* testsuite/gas/elf/dwarf2-18.d: Likewise.
* testsuite/gas/elf/dwarf2-5.d: Likewise.
* testsuite/gas/elf/dwarf2-6.d: Likewise.
* testsuite/gas/elf/dwarf2-7.d: Likewise.
ld * testsuite/ld-avr/gc-section-debugline.d: Update expected
output.
Jim has recently started working at SiFive, where he'll be contributing
to our binutils port. Andrew and I would like him to be a maintainer.
My understanding is that this is right place to ask.
I've also changed my address to my SiFive one, where I also work -- it
seems cleaner to have everyone use our proper email address. While I
was in there, I noticed a trailing space after Andrew's name so I went
ahead and removed it as well.
binutils/ChangeLog
2017-11-07 Palmer Dabbelt <palmer@sifive.com>
* MAINTAINERS (RISC-V): Add Jim Wilson as a maintainer.
Clean up Andrew's entry (remove trailing space, add tabs).
Change Palmer's email address, and clean up entry (add tabs).
binutils has lacked proper pluralization of output messages for a long
time, for example, readelf will display information about a section
that "contains 1 entries" or "There are 1 section headers". Fixing
this properly requires us to use ngettext, because other languages
have different rules to English.
This patch defines macros for ngettext and friends to handle builds
with --disable-nls, and tidies the existing nls support. I've
redefined gettext rather than just defining "_" as dgettext in bfd and
opcodes in case someone wants to use gettext there (which might
conceivably happen with generated code).
bfd/
* sysdep.h: Formatting, comment fixes.
(gettext, ngettext): Redefine when ENABLE_NLS.
(ngettext, dngettext, dcngettext): Define when !ENABLE_NLS.
(_): Define using gettext.
(textdomain, bindtextdomain): Use safer "do nothing".
* hosts/alphavms.h (textdomain, bindtextdomain): Likewise.
(ngettext, dngettext, dcngettext): Define when !ENABLE_NLS.
opcodes/
* opintl.h: Formatting, comment fixes.
(gettext, ngettext): Redefine when ENABLE_NLS.
(ngettext, dngettext, dcngettext): Define when !ENABLE_NLS.
(_): Define using gettext.
(textdomain, bindtextdomain): Use safer "do nothing".
binutils/
* sysdep.h (textdomain, bindtextdomain): Use safer "do nothing".
(ngettext, dngettext, dcngettext): Define when !ENABLE_NLS.
gas/
* asintl.h (textdomain, bindtextdomain): Use safer "do nothing".
(ngettext, dngettext, dcngettext): Define when !ENABLE_NLS.
gold/
* system.h (textdomain, bindtextdomain): Use safer "do nothing".
(ngettext, dngettext, dcngettext): Define when !ENABLE_NLS.
ld/
* ld.h (textdomain, bindtextdomain): Use safer "do nothing".
(ngettext, dngettext, dcngettext): Define when !ENABLE_NLS.
Force printing of the short/signed values using hexadecimal
representation via disassembler option.
opcode/
2017-11-03 Claudiu Zissulescu <claziss@synopsys.com>
* arc-dis.c (print_hex): New variable.
(parse_option): Check for hex option.
(print_insn_arc): Use hexadecimal representation for short
immediate values when requested.
(print_arc_disassembler_options): Add hex option to the list.
binutils/
2017-11-03 Claudiu Zissulescu <claziss@synopsys.com>
* doc/binutils.texi (ARC): Update disassembler options.
* testsuite/binutils-all/arc/hexprint.s: New file.
* testsuite/binutils-all/arc/objdump.exp: Test hex printing feature.
PR 22386
* dwarf.c (read_cie): Use bfd_size_type for
augmentation_data_len.
(display_augmentation_data): New function.
(display_debug_frames): Use it.
Check for integer overflow when testing augmentation_data_len.
PR 22369
* coffgen.c (_bfd_coff_free_symbols): Fail if called on a non-COFF
file.
* cofflink.c (coff_link_check_archive_element): Skip non-COFF
members of an archive.
* readelf.c (process_relocs): Tell users if no static relocs were
found, but if they had added --use-dynamic to the command line
then relocs would have been displayed.
PR 22361
* readelf.c (process_archive_index_and_symbols): Ensure ar_size
field is zero terminated for strtoul.
(setup_archive, get_archive_member_name): Likewise.
When displaying the .debug_frame section, the register numbers in the
DW_CFA_def_cfa* statements are read as signed numbers. I have come
across a target that has register 121, encoded as 0x79 in unsigned LEB128.
Interpreting this as signed results in -7, which makes readelf display
"r-7".
The DWARF5 standard (6.4.2.2) states that the register numbers should be
treated as unsigned LEB128.
Simply replacing READ_SLEB with READ_ULEB resulted in warnings like
these:
/home/emaisin/src/binutils-gdb/binutils/dwarf.c: In function ‘display_debug_frames’:
/home/emaisin/src/binutils-gdb/binutils/dwarf.c:355:17: error: comparison between signed and unsigned integer expressions [-Werror=sign-compare]
if ((var) != _val) \
^
/home/emaisin/src/binutils-gdb/binutils/dwarf.c:7866:8: note: in expansion of macro ‘READ_ULEB’
READ_ULEB (fc->cfa_reg);
^
... so I also changed Frame_Chunk::cfa_reg to an unsigned int.
binutils/ChangeLog:
* dwarf.c (struct Frame_Chunk) <cfa_reg>: Change type to
unsigned int.
(display_debug_frames): Read CFA reg as an unsigned number.
Some targets prefix global symbols with "_".
bfd/
* archive.c (_bfd_compute_and_write_armap): Match "__gnu_lto_slim"
optionally prefixed with "_".
* linker.c (_bfd_generic_link_add_one_symbol): Likewise.
binutils/
* nm.c (filter_symbols): Match "__gnu_lto_slim" optionally prefixed
with "_".
gold/
* symtab.cc (Symbol_table::add_from_relobj): Match "__gnu_lto_slim"
optionally prefixed with "_".
ld/
* testsuite/ld-plugin/lto-3r.d: Match "__gnu_lto_v" optionally
prefixed with "_".
* testsuite/ld-plugin/lto-5r.d: Likewise.
The print_core_note change here fixes the PR, the rest is making
readelf a little more bombproof against maliciously crafted binaries.
PR 22303
* readelf.c (print_core_note): Ensure "count" sanity check
calculation doesn't overflow.
(process_notes_at): Perform note namesz and descsz checks
using unsigned comparisons against data remaining. Catch
alignment overflow of namesz and descsz too. Don't allocate a
temp for terminating "name" when there is space available
before descdata.
In https://sourceware.org/ml/binutils/2017-10/msg00160.html, Nick said I
should update MAINTAINERS to mention that I'm the dwarf-mode.el
maintainer. So, I'm checking this in.
2017-10-17 Tom Tromey <tom@tromey.com>
* MAINTAINERS: Add myself as dwarf-mode.el maintainer.
Bump the dwarf-mode version number, so it can be installed by package.el
users who installed an earlier verision.
2017-10-10 Tom Tromey <tom@tromey.com>
* dwarf-mode.el: Bump to version 1.4.
I was recently examining a very large .debug file. I tried to use
dwarf-mode, but it blocked Emacs for a very long time while reading
output.
This patch changes dwarf-mode to run the objdump process asynchronously.
This way, I can still do other things in Emacs while waiting for the
dumping to finish.
2017-10-10 Tom Tromey <tom@tromey.com>
* dwarf-mode.el (dwarf--process, dwarf--deletion-region): New
defvar.
(dwarf--check-running, dwarf--sentinel, dwarf--invoke)
(dwarf--filter): New functions.
(dwarf-do-insert-substructure, dwarf-do-refresh): Call
dwarf--check-running, dwarf--invoke.
(dwarf-browse): Initialize new variables.
Emacs has had lexical binding for a while, and it's a good practice to
use it; so enable it in dwarf-mode.el.
2017-10-10 Tom Tromey <tom@tromey.com>
* dwarf-mode.el: Set lexical-binding.
It's bad Emacs style to define keys from a top-level form. Instead, one
should define a mode map separately and binding keys in the definition.
This lets users completely override the map by defining it before
loading the mode.
2017-10-10 Tom Tromey <tom@tromey.com>
* dwarf-mode.el (dwarf-mode-map): New defvar.
This patch tidies DWARF header checks, consolidating the "negative"
checks (which are really overflow checks) with the section size
check. In a number of cases this also ensures that small negative
lengths are caught. For instance
hdrptr = start + arange.ar_length + initial_length_size;
if (hdrptr < start || hdrptr > end)
does not detect ar_length in the range [-initial_length_size,-1].
* dwarf.c (process_debug_info): Consolidate header length checks.
(display_debug_pubnames_worker): Use "start" to read header.
Properly check header length and report errors earlier.
Simplify loop printing pubnames.
(get_line_filename_and_dirname): Catch small negative "length"
values.
(display_debug_aranges): Likewise. Report header errors
earlier using standardized message.
(display_debug_names): Likewise.
readelf.c:decode_arm_unwind has a variable res that is used as a
return value, with FALSE meaning unsuccessful and TRUE meaning
successful. This is initialized to FALSE (and then various code in
the function sets it to FALSE again on error), meaning that when the
function is successful, if it reaches returning res is still returns
FALSE, resulting eventually in exit status 1 from readelf without any
error message to indicate an error.
This patch fixes the initialization to use TRUE, so avoiding those
spurious errors. I don't have a self-contained test for this issue;
it was observed as many prelink tests failing without the patch and
passing with it.
* readelf.c (decode_arm_unwind): Initialize res to TRUE.
Pointer comparisons have traps for the unwary. After adding a large
unknown value to "start", the test "start < end" depends on where
"start" is originally in memory.
PR 22239
* dwarf.c (read_cie): Don't compare "start" and "end" pointers
after adding a possibly wild length to "start", compare the length
to the difference of the pointers instead. Remove now redundant
"negative" length test.
Same line but different file ought to display file and line.
PR 21978
* objdump.c: Formatting.
(show_line): Reset prev_line when function name changes.
This should make readelf bombproof given a fuzzed DT_HASH. Also
removes a bogus check that would have resulted in wrong histograms.
PR 22216
* readelf.c (process_symbol_table): Check that DT_HASH symbol
chains are only visited once, and report an error if not. Display
invalid symbol index if chain is out of range. Use the same logic
when calculating histograms rather than the PR 17531 fix. Delete
bogus check that chained index is less than number of buckets.
Preprocessor tokens like DWARF_VMA_FMT and BFD_VMA_FMT are not
understood by gettext, and cause the translation string to be
truncated. Even if it were not truncated, we wouldn't want a value
that changes depending on host or configure options to be put in a
translation string.
PR 21732
* dwarf.c (READ_ULEB): Don't use DWARF_VMA_FMT in translated string.
(READ_SLEB): Likewise.
* readelf.c (bfd_vmatoa): New function.
(get_data, get_dynamic_data): Use it for printing error messages.
When dumping location lists, also dump locview lists that may be
interspersed with them, and bring view pairs next to the corresponding
location list entries.
This patch supports DW_AT_GNU_locviews as a separate attribute for
DWARF4- loc_lists and split (dwo) loclists, as well as DWARF5
loclists.
It also supports, in DWARF5 loclists, the proposed
DW_LLE_GNU_view_pair loclist entry type proposed for DWARF6.
The tests use 32-bit DWARF, even on 64-bit targets, resolving offsets
to constants so as to reduce the risk that relocations be created for
them, or that the offsets be rejected as nonconstants.
The patch also adds an xfail to an unrelated test, namely dw5, so that
no unexpected fails remain on nds32*-elf, one of the tested targets.
Reviewed-by: Alan Modra <amodra@gmail.com>
for include/ChangeLog
* dwarf2.def (DW_AT_GNU_locviews): New.
* dwarf2.h (enum dwarf_location_list_entry_type): Add
DW_LLE_GNU_view_pair.
(DW_LLE_view_pair): Define.
for binutils/ChangeLog
* dwarf.h (debug_info): Add loc_views and num_loc_views.
* dwarf.c (vm1): New constant.
(print_dwarf_view): New function.
(read_and_display_attr_value): Support DW_AT_GNU_locviews.
(process_debug_info): Keep num_loc_offsets and num_loc_views
in sync.
(display_view_pair_list): New function.
(display_loc_list_dwo): Take vstart_ptr; update it. Dump
location view pairs before the range they apply to, when a
viewlist augments the loc list.
(display_loc_list): Likewise. Check view numbers in range
tests.
(display_loclists_list): Likewise. Handle view pair entries,
and warn on trailing ones.
(loc_views): New variable.
(loc_offsets_compar): Compare loc_views if loc_offsets are the
same.
(display_debug_loc): Check and sort loc_views too. Accept
loc_view as expected_start. Skip if lists and views are the
same. Dump locview list separately in order, and pass the
locview list base to each list dump function. Warn and skip
overlap and hole checking if we find loclists and locviews to
not be adjacent.
* testsuite/binutils-all/locview-1.s: New.
* testsuite/binutils-all/readelf.locview-1: New.
* testsuite/binutils-all/locview-2.s: New.
* testsuite/binutils-all/readelf.locview-2: New.
* testsuite/binutils-all/readelf.exp: Run new tests. Fix
option spelling in pr18374 fail message. XFAIL dw5 test on
nds32*-elf.
We have multiple tests that report failure to assemble without saying
exactly what test is failing.
* testsuite/binutils-all/readelf.exp: Don't perror and exit on
bintest.s assembly failure. Report tests unresolved instead.
Likewise for version note test, pr18374, decompress, and dw5
tests.
(readelf_test): Set testname to include both option and binary
file name. Use for pass/fail.
Fix commit e407c74b5b ("Support for MIPS R5900 (Sony Playstation 2)"),
<https://sourceware.org/ml/binutils/2012-12/msg00240.html>, and add the
handling of E_MIPS_MACH_5900, correctly showing `5900' among `Flags:' in
the output of `-h' rather than `unknown CPU'.
binutils/
* readelf.c (get_machine_flags) <E_MIPS_MACH_5900>: New case.
gas/
* testsuite/gas/mips/elf_mach_5900.d: New test.
* testsuite/gas/mips/mips.exp: Run it.
PR 21994
* readelf.c (process_version_sections <SHT_GNU_verdef>): Check
vd_aux and vda_next for sanity. Delete "end". Correct overflow
checks.
(process_version_sections <SHT_GNU_verneed>): Correct overflow
check. Don't report invalid vna_next on overflow. Do report
invalid vna_next on size less than aux info.
This tidies some of the overflow checking when processing verneed
and verdef sections.
PR 21990
* readelf.c (process_version_sections <SHT_GNU_verneed>): Check
for invalid vn_next field before adding to idx. Use unsigned
long for index vars. Move index checks.
<SHT_GNU_verdef>: Likewise for vd_next.
* testsuite/binutils-all/note-3-64.s: New test. Checks assembly
and decoding of version2 GNU build attribute notes.
* testsuite/binutils-all/note-3-32.s: New test. 32-bit version of
the above test.
* testsuite/binutils-all/note-3-64.d: New test driver.
* testsuite/binutils-all/note-3-32.d: New test driver.
* testsuite/binutils-all/objcopy.exp: Run the new test.
* readelf.c (is_64bit_abs_reloc): Add R_SPARC_64.
Add new note types available since Linux 4.8 to elf/common.h and
make the 'readelf' tool aware of it.
include/
* elf/common.h (NT_PPC_TAR): New macro.
(NT_PPC_PPR): Likewise.
(NT_PPC_DSCR): Likewise.
(NT_PPC_EBB): Likewise.
(NT_PPC_PMU): Likewise.
(NT_PPC_TM_CGPR): Likewise.
(NT_PPC_TM_CFPR): Likewise.
(NT_PPC_TM_CVMX): Likewise.
(NT_PPC_TM_CVSX): Likewise.
(NT_PPC_TM_SPR): Likewise.
(NT_PPC_TM_CTAR): Likewise.
(NT_PPC_TM_CPPR): Likewise.
(NT_PPC_TM_CDSCR): Likewise.
binutils/
* readelf.c (get_note_type): Handle PPC note types available
since Linux 4.8.
PR 21813
binutils* rddbg.c (read_symbol_stabs_debugging_info): Check for an empty
string whilst concatenating symbol names.
bfd * mach-o.c (bfd_mach_o_canonicalize_relocs): Pass the base address
of the relocs to the canonicalize_one_reloc routine.
* mach-o.h (struct bfd_mach_o_backend_data): Update the prototype
for the _bfd_mach_o_canonicalize_one_reloc field.
* mach-o-arm.c (bfd_mach_o_arm_canonicalize_one_reloc): Add
res_base parameter. Use to check for corrupt pair relocs.
* mach-o-aarch64.c (bfd_mach_o_arm64_canonicalize_one_reloc):
Likewise.
* mach-o-i386.c (bfd_mach_o_i386_canonicalize_one_reloc):
Likewise.
* mach-o-x86-64.c (bfd_mach_o_x86_64_canonicalize_one_reloc):
Likewise.
* vms-alpha.c (_bfd_vms_slurp_eihd): Make sure that there is
enough data in the record before attempting to parse it.
(_bfd_vms_slurp_eeom): Likewise.
(_bfd_vms_slurp_egsd): Check for an invalid section index.
(image_set_ptr): Likewise.
(alpha_vms_slurp_relocs): Likewise.
bfd * elf32-xtensa.c (elf_xtensa_get_plt_section): Increase length of
plt_name buffer.
(elf_xtensa_get_gotplt_section): Increase length of got_name
buffer.
* mach-o-arm.c (bfd_mach_o_arm_canonicalize_one_reloc): Add a
default return of FALSE.
* mach-o-i386.c (bfd_mach_o_i386_canonicalize_one_reloc): Add a
default return of FALSE.
binutils * dwarf.c (dwarf_vmatoa_1): Do not pass a NULL string pointer to
sprintf.
* srconv.c (walk_tree_type): Initialise the spare field of the
IT_dty structure.
gas * config/tc-pru.c (md_assemble): Add continue statement after
handling 'E' operand character.
* config/tc-v850.c (md_assemble): Initialise the 'insn' variable.
This core dump note contains the same information returned by the
ptrace PT_LWPINFO operation for each LWP belonging to a process.
binutils/ChangeLog:
* readelf.c (get_freebsd_elfcore_note_type): Handle
NT_FREEBSD_PTLWPINFO.
include/ChangeLog:
* elf/common.h (NT_FREEBSD_PTLWPINFO): Define.
Fix GCC 4.2 warnings like:
cc1: warnings being treated as errors
binutils-gdb/bfd/dwarf2.c:1844: warning: declaration of ‘time’ shadows a global declaration
/usr/include/time.h:187: warning: shadowed declaration is here
binutils-gdb/bfd/dwarf2.c: In function ‘line_info_add_file_name’:
binutils-gdb/bfd/dwarf2.c:1854: warning: declaration of ‘time’ shadows a global declaration
/usr/include/time.h:187: warning: shadowed declaration is here
bfd/
* dwarf2.c (line_info_add_include_dir_stub): Replace time with
xtime.
(line_info_add_file_name): Likewise.
(decode_line_info): Likewise.
binutils/
* dwarf.c (display_debug_names): Replace index with xindex.
This reverts most of 0680331375, 2005-07-05 Dmitry V. Levin change
adding a check that section size doesn't exceed file size. As we've
seen recently with mmo tests, decoded section size can easily exceed
file size with formats that encode section data.
I've also changed "strings" to use bfd_malloc_and_get_section, so that
"strings" won't die on a malloc failure. I think it's better to
continue on looking at other sections after failing to dump a section
with fuzzed size.
The testcases at https://bugzilla.altlinux.org/show_bug.cgi?id=5871
on a 32-bit host now produce
$ strings -d --target=a.out-i386 /tmp/bfdkiller.dat
strings: error: /tmp/bfdkiller.dat(.text) is too large (0xffffffff bytes)
strings: /tmp/bfdkiller.dat: Reading section .text failed: Memory exhausted
strings: /tmp/bfdkiller.dat: Reading section .data failed: File truncated
org.ec
$ strings -d --target=a.out-i386 /tmp/eclipse-state
strings: /tmp/eclipse-state: Reading section .text failed: File truncated
org.eclipse.osgi
System Bundle
[snip]
* strings.c (filename_and_size_t): Delete.
(strings_a_section): Don't check section size against file size.
Use bdf_malloc_and_get_section. Report an error on failures.
Replace arg param with filename and got_a_section param.
(got_a_section): Move to..
(strings_object_file): ..an auto var here. Iterate over sections
rather than calling bfd_map_over_sections. Adjust strings_a_section
call.
It's nicer than xmalloc followed by bfd_get_section_contents, since
xmalloc exits on failure and needs a check that its size_t arg doesn't
lose high bits when converted from bfd_size_type.
PR binutils/21665
* objdump.c (strtab): Make var a bfd_byte*.
(disassemble_section): Don't limit malloc size. Instead, use
bfd_malloc_and_get_section.
(read_section_stabs): Use bfd_malloc_and_get_section. Return
bfd_byte*.
(find_stabs_section): Remove now unnecessary cast.
* objcopy.c (copy_object): Use bfd_malloc_and_get_section. Free
contents on error return.
* nlmconv.c (copy_sections): Use bfd_malloc_and_get_section.
PR binutils/21665
* objdump.c (disassemble_section): Move check for an overlarge
section to just before the allocation of memory. Do not check
section size against file size, but instead use an arbitrary 2Gb
limit. Issue a warning message if the section is too big.
Add support for the base and Virtualization ASE microMIPS instructions
as per the architecture specifications[1][2][3][4].
Most of this change by Andrew Bennett.
[1] "MIPS Architecture for Programmers Volume II-B: The microMIPS32
Instruction Set", MIPS Technologies, Inc., Document Number: MD00582,
Revision 5.04, January 15, 2014, Section 5.5 "Recoded 32-Bit
Instructions", p. 340
[2] "microMIPS32 Architecture for Programmers Volume IV-i:
Virtualization Module of the microMIPS32 Architecture", MIPS
Technologies, Inc., Document Number: MD00848, Revision 1.06,
December 10, 2013, Section 6.1 "Overview", pp. 133, 136
[3] "MIPS Architecture for Programmers Volume II-B: The microMIPS64
Instruction Set", MIPS Technologies, Inc., Document Number: MD00594,
Revision 5.04, January 15, 2014, Section 5.5 "Recoded 32-Bit
Instructions", pp. 415, 444
[4] "microMIPS64 Architecture for Programmers Volume IV-i:
Virtualization Module of the microMIPS64 Architecture", MIPS
Technologies, Inc., Document Number: MD00849, Revision 1.06,
December 10, 2013, Section 6.1 "Overview", pp. 134-135, 139-140
binutils/
* NEWS: Mention microMIPS XPA support.
opcodes/
* micromips-opc.c (XPA, XPAVZ): New macros.
(micromips_opcodes): Add "mfhc0", "mfhgc0", "mthc0" and
"mthgc0".
gas/
* config/tc-mips.c (mips_ases): Add microMIPS XPA support.
* testsuite/gas/mips/micromips@xpa.d: New test.
* testsuite/gas/mips/mips.exp: Run the new test. Enable
`xpa-virt-err' test for `micromips'.
Add base microMIPS Release 5 ISA support and the ERETNC instruction in
particular, as per the architecture specifications[1][2].
Most of this change by Andrew Bennett.
References:
[1] "MIPS Architecture for Programmers Volume II-B: The microMIPS32
Instruction Set", MIPS Technologies, Inc., Document Number: MD00582,
Revision 5.04, January 15, 2014, Section 5.5 "Recoded 32-Bit
Instructions", pp. 266-267
[2] "MIPS Architecture for Programmers Volume II-B: The microMIPS64
Instruction Set", MIPS Technologies, Inc., Document Number: MD00594,
Revision 5.04, January 15, 2014, Section 5.5 "Recoded 32-Bit
Instructions", pp. 326-327
binutils/
* NEWS: Mention microMIPS Release 5 ISA support.
opcodes/
* micromips-opc.c (I36): New macro.
(micromips_opcodes): Add "eretnc".
gas/
* testsuite/gas/mips/micromips@r5.d: New test.
* testsuite/gas/mips/mips.exp: Run the new test.
Correct a commit 7d64c587c1 ("Add support for the MIPS eXtended
Physical Address (XPA) ASE.") bug, causing XPA base and Virtualization
ASE instructions to be wrongly always enabled with the selection of the
MIPS32r2 or higher ISA.
For example this source assembles successfully as shown below:
$ cat xpa.s
mfhc0 $2, $1
$ as -32 -mips32 -o xpa.o xpa.s
xpa.s: Assembler messages:
xpa.s:1: Error: opcode not supported on this processor: mips32 (mips32) `mfhc0 $2,$1'
$ as -32 -mips32r2 -o xpa.o xpa.s
$ objdump -d xpa.o
xpa.o: file format elf32-tradbigmips
Disassembly of section .text:
00000000 <.text>:
0: 40420800 mfhc0 v0,c0_random
...
$
To address this issue remove the I33 (INSN_ISA32R2) marking from all XPA
instructions in the opcode table. Additionally, for XPA Virtualization
ASE instructions implement an XPAVZ (ASE_XPA_VIRT) combination ASE flag
and use it in place of IVIRT|XPA (ASE_VIRT|ASE_XPA).
Now the same source is correctly rejected unless the `-mxpa' option is
also used:
$ as -32 -mips32r2 -o xpa.o xpa.s
xpa.s: Assembler messages:
xpa.s:1: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mfhc0 $2,$1'
$ as -32 -mips32r2 -mxpa -o xpa.o xpa.s
$
Add test cases for XPA base and XPA Virtualization ASE instructions.
Parts of this change by Andrew Bennett.
include/
* opcode/mips.h (ASE_XPA_VIRT): New macro.
opcodes/
* mips-dis.c (mips_calculate_combination_ases): Handle the
ASE_XPA_VIRT flag.
(parse_mips_ase_option): New function.
(parse_mips_dis_option): Factor out ASE option handling to the
new function. Call `mips_calculate_combination_ases'.
* mips-opc.c (XPAVZ): New macro.
(mips_builtin_opcodes): Correct ISA and ASE flags for "mfhc0",
"mfhgc0", "mthc0" and "mthgc0".
gas/
* config/tc-mips.c (mips_set_ase): Handle the ASE_XPA_VIRT flag.
* testsuite/gas/mips/xpa.d: Remove `xpa' from `-M' in `objdump'
flags. Add `-mvirt' to `as' flags.
* testsuite/gas/mips/xpa-err.d: New test.
* testsuite/gas/mips/xpa-virt-err.d: New test.
* testsuite/gas/mips/xpa-err.l: New stderr output.
* testsuite/gas/mips/xpa-virt-err.l: New stderr output.
* testsuite/gas/mips/xpa-err.s: New test source.
* testsuite/gas/mips/xpa-virt-err.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
binutils/
* testsuite/binutils-all/mips/mips-xpa-virt-1.d: New test.
* testsuite/binutils-all/mips/mips-xpa-virt-2.d: New test.
* testsuite/binutils-all/mips/mips-xpa-virt-3.d: New test.
* testsuite/binutils-all/mips/mips-xpa-virt-4.d: New test.
* testsuite/binutils-all/mips/mips-xpa-virt.s: New test source.
* testsuite/binutils-all/mips/mips.exp: Run the new tests.
There is a bug in handling of cpu=... disassembler option in case there are
other options after it, for example, `cpu=EM,dsp'. In this case `EM,dsp' is
treated as an option value, and strcasecmp reports is as non-equal to "EM".
This is fixed by using disassembler_options_cmp function, which compares string
treating `,' the same way as `\0'.
This function also solves a problem with option order in parse_option.
Previously, if several option had same prefix (e.g. fpud, fpuda), then the
longer one should have been compared first, otherwise when longer option is
passed it would be treated as a short one, because
CONST_STRNEQ ("fpud", "fpuda")
would be true. The order of options was correct for ARC, so there were no
bugs per se, but with disassembler_option_cmp there is no risk of such a bug
being introduced in the future.
opcodes/ChangeLog:
yyyy-mm-dd Anton Kolesov <Anton.Kolesov@synopsys.com>
* arc-dis.c (parse_option): Use disassembler_options_cmp to compare
disassembler option strings.
(parse_cpu_option): Likewise.
binutils/ChangeLog
yyyy-mm-dd Anton Kolesov <Anton.Kolesov@synopsys.com>
* testsuite/binutils-all/arc/double_store.s: New file.
* testsuite/binutils-all/arc/objdump.exp: Tests for disassembler
options.
(do_objfile): New function.
(check_assembly): Likewise.
Newer Linux kernel versions offer two new register sets in support of the
z/Architecture's guarded storage facility: NT_S390_GS_CB, the
"guarded-storage registers", and NT_S390_GS_BC, the "guarded-storage
broadcast control block". This patch adds support for the respective core
notes sections to binutils.
bfd/ChangeLog:
* elf-bfd.h (elfcore_write_s390_gs_cb): Add prototype.
(elfcore_write_s390_gs_bc): Likewise.
* elf.c (elfcore_grok_s390_gs_cb): New function.
(elfcore_grok_s390_gs_bc): New function.
(elfcore_grok_note): Call them.
(elfcore_write_s390_gs_cb): New function.
(elfcore_write_s390_gs_bc): New function.
(elfcore_write_register_note): Call them.
binutils/ChangeLog:
* readelf.c (get_note_type): Add NT_S390_GS_CB and NT_S390_GS_BC.
include/ChangeLog:
* elf/common.h (NT_S390_GS_CB): New macro.
(NT_S390_GS_BC): Likewise.
bfd_get_size and bfd_get_file_size should return the unsigned file
size. Otherwise they return negative values for file >= 2GB with
32-bit ufile_ptr.
bfd/
* bfd-in2.h: Regenerated.
* bfdio.c (bfd_get_size): Change return type to ufile_ptr.
(bfd_get_file_size): Likewise.
binutils/
* objdump.c (dump_relocs_in_section): Cast to ufile_ptr when
comparing against bfd_get_file_size return.
Add support for the Imagination interAptiv MR2 MIPS32r3 processor with
the MIPS16e2 ASE as per documentation, including in particular:
1. Support for implementation-specific interAptiv MR2 COPYW and UCOPYW
MIPS16e2 instructions[1], for assembly and disassembly,
2. Support for implementation-specific interAptiv MR2 SAVE and RESTORE
regular MIPS instructions[2], for assembly and disassembly,
3. ELF binary file annotation for the interAptiv MR2 MIPS architecture
extension.
4. Support for interAptiv MR2 architecture selection for assembly, in
the form of the `-march=interaptiv-mr2' command-line option and its
corresponding `arch=interaptiv-mr2' setting for the `.set' and
`.module' pseudo-ops.
5. Support for interAptiv MR2 architecture selection for disassembly,
in the form of the `mips:interaptiv-mr2' target architecture, for
use e.g. with the `-m' command-line option for `objdump'.
Parts of this change by Matthew Fortune and Andrew Bennett.
References:
[1] "MIPS32 interAptiv Multiprocessing System Software User's Manual",
Imagination Technologies Ltd., Document Number: MD00904, Revision
02.01, June 15, 2016, Section 24.3 "MIPS16e2 Implementation Specific
Instructions", pp. 878-883
[2] same, Chapter 25 "Implementation-specific Instructions", pp. 911-917
include/
* elf/mips.h (E_MIPS_MACH_IAMR2): New macro.
(AFL_EXT_INTERAPTIV_MR2): Likewise.
* opcode/mips.h: Document new operand codes defined.
(INSN_INTERAPTIV_MR2): New macro.
(INSN_CHIP_MASK): Adjust accordingly.
(CPU_INTERAPTIV_MR2): New macro.
(cpu_is_member) <CPU_INTERAPTIV_MR2>: New case.
(MIPS16_ALL_ARGS): Rename to...
(MIPS_SVRS_ALL_ARGS): ... this.
(MIPS16_ALL_STATICS): Rename to...
(MIPS_SVRS_ALL_STATICS): ... this.
bfd/
* archures.c (bfd_mach_mips_interaptiv_mr2): New macro.
* cpu-mips.c (I_interaptiv_mr2): New enum value.
(arch_info_struct): Add "mips:interaptiv-mr2" entry.
* elfxx-mips.c (_bfd_elf_mips_mach) <E_MIPS_MACH_IAMR2>: New
case.
(mips_set_isa_flags) <bfd_mach_mips_interaptiv_mr2>: Likewise.
(bfd_mips_isa_ext) <bfd_mach_mips_interaptiv_mr2>: Likewise.
(print_mips_isa_ext) <AFL_EXT_INTERAPTIV_MR2>: Likewise.
(mips_mach_extensions): Add `bfd_mach_mipsisa32r3' and
`bfd_mach_mips_interaptiv_mr2' entries.
* bfd-in2.h: Regenerate.
opcodes/
* mips-formats.h (INT_BIAS): New macro.
(INT_ADJ): Redefine in INT_BIAS terms.
* mips-dis.c (mips_arch_choices): Add "interaptiv-mr2" entry.
(mips_print_save_restore): New function.
(print_insn_arg) <OP_SAVE_RESTORE_LIST>: Update comment.
(validate_insn_args) <OP_SAVE_RESTORE_LIST>: Remove `abort'
call.
(print_insn_args): Handle OP_SAVE_RESTORE_LIST.
(print_mips16_insn_arg): Call `mips_print_save_restore' for
OP_SAVE_RESTORE_LIST handling, factored out from here.
* mips-opc.c (decode_mips_operand) <'-'> <'m'>: New case.
(RD_31, RD_SP, WR_SP, MOD_SP, IAMR2): New macros.
(mips_builtin_opcodes): Add "restore" and "save" entries.
* mips16-opc.c (decode_mips16_operand) <'n', 'o'>: New cases.
(IAMR2): New macro.
(mips16_opcodes): Add "copyw" and "ucopyw" entries.
binutils/
* readelf.c (get_machine_flags) <E_MIPS_MACH_IAMR2>: New case.
(print_mips_isa_ext) <AFL_EXT_INTERAPTIV_MR2>: Likewise.
* NEWS: Mention Imagination interAptiv MR2 processor support.
gas/
* config/tc-mips.c (validate_mips_insn): Handle
OP_SAVE_RESTORE_LIST specially.
(mips_encode_save_restore, mips16_encode_save_restore): New
functions.
(match_save_restore_list_operand): Factor out SAVE/RESTORE
operand insertion into the instruction word or halfword to these
new functions.
(mips_cpu_info_table): Add "interaptiv-mr2" entry.
* doc/c-mips.texi (MIPS Options): Add `interaptiv-mr2' to the
`-march=' argument list.
PR binutils/21665
bfd * opncls.c (get_build_id): Check that the section is beig enough
to contain the whole note.
* compress.c (bfd_get_full_section_contents): Check for and reject
a section whoes size is greater than the size of the entire file.
* elf32-v850.c (v850_elf_copy_notes): Allow for the ouput to not
contain a notes section.
binutils* objdump.c (disassemble_section): Skip any section that is bigger
than the entire file.
=== Context ===
This patch is part of a patch series to add support for ARMv8-R
architecture. Its purpose is to add support for ARMv8-R in GAS:
instructions, build attributes and readelf.
=== Patch description ===
Although some differences exist for system registers, from GAS point of
view ARMv8-R supports the same instructions as ARMv8-A Aarch32 state
and a subset of its extensions. This patch therefore introduce a new
feature bit to distinguish the availability of the pan, ras and rdma
extensions between ARMv8-A and ARMv8-R and allow crypto, fp and simd
extensions to be used by ARMv8-R.
Most of the changes are then in the testsuite to (i) rename source files
and error output to be shared between ARMv8-A and ARMv8-R, (ii) rename
files with expected output for ARMv8-A build attributes and (iii) add
new files with expected output for ARMv8-R build attributes.
2017-06-24 Thomas Preud'homme <thomas.preudhomme@arm.com>
binutils/
* readelf.c (arm_attr_tag_CPU_arch): Fill value for ARMv8-R.
gas/
* NEWS: Mention support for ARMv8-R architecture.
* config/tc-arm.c (arm_archs): Add entry for ARMv8-R.
(arm_extensions): Restrict pan, ras and rdma extension to
ARMv8-A and make crypto, fp and simd extensions available to
ARMv8-R.
(cpu_arch_ver): Add entry for ARMv8-R.
(aeabi_set_public_attributes): Update gas_assert for Tag_DIV_use
logic.
* testsuite/gas/arm/armv8-a+fp.s: Rename into ...
* testsuite/gas/arm/armv8-ar+fp.s: This. Remove .arch directive.
* testsuite/gas/arm/armv8-a+fp.d: Specify source to assemble and
architecture to assemble for.
* testsuite/gas/arm/armv8-r+fp.d: New.
* testsuite/gas/arm/armv8-a+simd.s: Rename into ...
* testsuite/gas/arm/armv8-ar+simd.s: This. Remove .arch directive.
* testsuite/gas/arm/armv8-a+simd.d: Specify source to assemble and
architecture to assemble for.
* testsuite/gas/arm/armv8-r+simd.d: New.
* testsuite/gas/arm/armv8-a-bad.s: Rename into ...
* testsuite/gas/arm/armv8-ar-bad.s: This. Remove .arch directive.
* testsuite/gas/arm/armv8-a-bad.l: Rename into ...
* testsuite/gas/arm/armv8-ar-bad.l: This. Decrement line number by 1.
* testsuite/gas/arm/armv8-a-bad.d: Specify source to assemble,
architecture to assemble for and adjust error output file.
* testsuite/gas/arm/armv8-r-bad.d: New.
* testsuite/gas/arm/armv8-a-barrier.s: Rename into ...
* testsuite/gas/arm/armv8-ar-barrier.s: This.
* testsuite/gas/arm/armv8-a-barrier-arm.d: Adjust source.
* testsuite/gas/arm/armv8-a-barrier-thumb.d: Likewise.
* testsuite/gas/arm/armv8-r-barrier-arm.d: New.
* testsuite/gas/arm/armv8-r-barrier-thumb.d: New.
* testsuite/gas/arm/armv8-a-it-bad.s: Rename into ...
* testsuite/gas/arm/armv8-ar-it-bad.s: This. Remove .arch directive.
* testsuite/gas/arm/armv8-a-it-bad.l: Rename into ...
* testsuite/gas/arm/armv8-ar-it-bad.l: This. Decrement line number
by 1.
* testsuite/gas/arm/armv8-a-it-bad.d: Specify source to assemble,
architecture to assemble for and adjust error output file.
* testsuite/gas/arm/armv8-r-it-bad.d: New.
* testsuite/gas/arm/armv8-a.s: Rename into ...
* testsuite/gas/arm/armv8-ar.s: This. Remove .arch directive.
* testsuite/gas/arm/armv8-a.d: Specify source to assemble and
architecture to assemble for.
* testsuite/gas/arm/armv8-r.d: New.
* testsuite/gas/arm/attr-march-armv8-r+crypto.d: New.
* testsuite/gas/arm/attr-march-armv8-r+fp.d: New.
* testsuite/gas/arm/attr-march-armv8-r+simd.d: New.
* testsuite/gas/arm/attr-march-armv8-r.d: New.
* testsuite/gas/arm/crc32.s: Rename into ...
* testsuite/gas/arm/crc32-armv8-ar.s: This.
* testsuite/gas/arm/crc32.d: Rename into ...
* testsuite/gas/arm/crc32-armv8-a.d: This. Specify source to assemble.
* testsuite/gas/arm/crc32-armv8-r.d: New.
* testsuite/gas/arm/crc32-bad.s: Rename into ...
* testsuite/gas/arm/crc32-armv8-ar-bad.s: This.
* testsuite/gas/arm/crc32-bad.d: Rename into ...
* testsuite/gas/arm/crc32-armv8-a-bad.d: This. Specify source to
assemble.
* testsuite/gas/arm/crc32-armv8-r-bad.d: New.
* testsuite/gas/arm/mask_1.s: Rename into ...
* testsuite/gas/arm/mask_1-armv8-ar.s: This.
* testsuite/gas/arm/mask_1.d: Rename into ...
* testsuite/gas/arm/mask_1-armv8-a.d: This. Specify source to
assemble.
* testsuite/gas/arm/mask_1-armv8-r.d: new.
include/
* elf/arm.h (TAG_CPU_ARCH_V8R): New macro.
* opcode/arm.h (ARM_EXT2_V8A): New macro.
(ARM_AEXT2_V8A): Rename into ...
(ARM_AEXT2_V8AR): This.
(ARM_AEXT2_V8A): New macro.
(ARM_AEXT_V8R): New macro.
(ARM_AEXT2_V8R): New macro.
(ARM_ARCH_V8R): New macro.
This patch adds a new S/390 specific segment type: PT_S390_PGSTE. For
binaries marked with that segment the kernel will allocate 4k page
tables. The only user so far will be qemu.
ld/ChangeLog:
2017-06-23 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* Makefile.in: Add s390.em as build dependency.
* emulparams/elf64_s390.sh (EXTRA_EM_FILE): Add s390.em.
* emultempl/s390.em: New file.
* gen-doc.texi: Add documentation for --s390-pgste option.
* ld.texinfo: Likewise.
include/ChangeLog:
2017-06-23 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* elf/s390.h (PT_S390_PGSTE): Define macro.
binutils/ChangeLog:
2017-06-23 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* readelf.c (get_s390_segment_type): Add support for the new
segment type PT_S390_PGSTE.
(get_segment_type): Call get_s390_segment_type.
elfcpp/ChangeLog:
2017-06-23 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* elfcpp.h (enum PT): Add PT_S390_PGSTE to enum.
bfd/ChangeLog:
2017-06-23 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* elf-s390.h: New file.
* elf64-s390.c (struct elf_s390_link_hash_table): Add params
field.
(elf_s390_additional_program_headers): New function.
(elf_s390_modify_segment_map): New function.
(bfd_elf_s390_set_options): New function.
(elf_backend_additional_program_headers)
(elf_backend_modify_segment_map): Add macro definitions.
To support IBT in Intel Control-flow Enforcement Technology (CET)
instructions:
https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-enforcement-technology-preview.pdf
#define GNU_PROPERTY_X86_FEATURE_1_AND 0xc0000002
#define GNU_PROPERTY_X86_FEATURE_1_IBT (1U << 0)
are added to GNU program properties to indicate that all executable
sections are compatible with IBT when ENDBR instruction starts each
valid target where an indirect branch instruction can land.
GNU_PROPERTY_X86_FEATURE_1_IBT is set on output only if it is set on
all relocatable inputs.
The followings changes are made to the Procedure Linkage Table (PLT):
1. For 64-bit x86-64, PLT is changed to
PLT0: push GOT[1]
bnd jmp *GOT[2]
nop
...
PLTn: endbr64
push namen_reloc_index
bnd jmp PLT0
together with the second PLT section:
PLTn: endbr64
bnd jmp *GOT[namen_index]
nop
BND prefix is also added so that IBT-enabled PLT is compatible with MPX.
2. For 32-bit x86-64 (x32) and i386, PLT is changed to
PLT0: push GOT[1]
jmp *GOT[2]
nop
...
PLTn: endbr64 # endbr32 for i386.
push namen_reloc_index
jmp PLT0
together with the second PLT section:
PLTn: endbr64 # endbr32 for i386.
jmp *GOT[namen_index]
nop
BND prefix isn't used since MPX isn't supported on x32 and BND registers
aren't used in parameter passing on i386.
GOT is an array of addresses. Initially, GOT[namen_index] is filled
with the address of the ENDBR instruction of the corresponding entry
in the first PLT section. The function, namen, is called via the
ENDBR instruction in the second PLT entry. GOT[namen_index] is updated
to the actual address of the function, namen, at run-time.
2 linker command line options are added:
1. -z ibtplt: Generate IBT-enabled PLT.
2. -z ibt: Generate GNU_PROPERTY_X86_FEATURE_1_IBT in GNU program
properties as well as IBT-enabled PLT.
bfd/
* elf32-i386.c (elf_i386_lazy_ibt_plt0_entry): New.
(elf_i386_lazy_ibt_plt_entry): Likewise.
(elf_i386_pic_lazy_ibt_plt0_entry): Likewise.
(elf_i386_non_lazy_ibt_plt_entry): Likewise.
(elf_i386_pic_non_lazy_ibt_plt_entry): Likewise.
(elf_i386_eh_frame_lazy_ibt_plt): Likewise.
(elf_i386_lazy_plt_layout): Likewise.
(elf_i386_non_lazy_plt_layout): Likewise.
(elf_i386_link_hash_entry): Add plt_second.
(elf_i386_link_hash_table): Add plt_second and
plt_second_eh_frame.
(elf_i386_allocate_dynrelocs): Use the second PLT if needed.
(elf_i386_size_dynamic_sections): Use .plt.got unwind info for
the second PLT. Check the second PLT.
(elf_i386_relocate_section): Use the second PLT to resolve
PLT reference if needed.
(elf_i386_finish_dynamic_symbol): Fill and use the second PLT if
needed.
(elf_i386_finish_dynamic_sections): Set sh_entsize on the
second PLT. Generate unwind info for the second PLT.
(elf_i386_plt_type): Add plt_second.
(elf_i386_get_synthetic_symtab): Support the second PLT.
(elf_i386_parse_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND.
(elf_i386_merge_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn
on GNU_PROPERTY_X86_FEATURE_1_IBT
(elf_i386_link_setup_gnu_properties): If info->ibt is set,
turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT
for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT
is set on all relocatable inputs.
* elf64-x86-64.c (elf_x86_64_lazy_ibt_plt_entry): New.
(elf_x32_lazy_ibt_plt_entry): Likewise.
(elf_x86_64_non_lazy_ibt_plt_entry): Likewise.
(elf_x32_non_lazy_ibt_plt_entry): Likewise.
(elf_x86_64_eh_frame_lazy_ibt_plt): Likewise.
(elf_x32_eh_frame_lazy_ibt_plt): Likewise.
(elf_x86_64_lazy_ibt_plt): Likewise.
(elf_x32_lazy_ibt_plt): Likewise.
(elf_x86_64_non_lazy_ibt_plt): Likewise.
(elf_x32_non_lazy_ibt_plt): Likewise.
(elf_x86_64_get_synthetic_symtab): Support the second PLT.
(elf_x86_64_parse_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND.
(elf_x86_64_merge_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn
on GNU_PROPERTY_X86_FEATURE_1_IBT
(elf_x86_64_link_setup_gnu_properties): If info->ibt is set,
turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT
for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT
is set on all relocatable inputs.
binutils/
* readelf.c (decode_x86_feature): New.
(print_gnu_property_note): Call decode_x86_feature on
GNU_PROPERTY_X86_FEATURE_1_AND.
* testsuite/binutils-all/i386/empty.d: New file.
* testsuite/binutils-all/i386/empty.s: Likewise.
* testsuite/binutils-all/i386/ibt.d: Likewise.
* testsuite/binutils-all/i386/ibt.s: Likewise.
* testsuite/binutils-all/x86-64/empty-x32.d: Likewise.
* testsuite/binutils-all/x86-64/empty.d: Likewise.
* testsuite/binutils-all/x86-64/empty.s: Likewise.
* testsuite/binutils-all/x86-64/ibt-x32.d: Likewise.
* testsuite/binutils-all/x86-64/ibt.d: Likewise.
* testsuite/binutils-all/x86-64/ibt.s: Likewise.
include/
* bfdlink.h (bfd_link_info): Add ibtplt and ibt.
* elf/common.h (GNU_PROPERTY_X86_FEATURE_1_AND): New.
(GNU_PROPERTY_X86_FEATURE_1_IBT): Likewise.
ld/
* Makefile.am (ELF_X86_DEPS): Add $(srcdir)/emulparams/cet.sh.
* Makefile.in: Regenerated.
* NEWS: Mention GNU_PROPERTY_X86_FEATURE_1_IBT, -z ibtplt
and -z ibt.
* emulparams/cet.sh: New file.
* testsuite/ld-i386/ibt-plt-1.d: Likewise.
* testsuite/ld-i386/ibt-plt-1.s: Likewise.
* testsuite/ld-i386/ibt-plt-2.s: Likewise.
* testsuite/ld-i386/ibt-plt-2a.d: Likewise.
* testsuite/ld-i386/ibt-plt-2b.d: Likewise.
* testsuite/ld-i386/ibt-plt-2c.d: Likewise.
* testsuite/ld-i386/ibt-plt-2d.d: Likewise.
* testsuite/ld-i386/ibt-plt-3.s: Likewise.
* testsuite/ld-i386/ibt-plt-3a.d: Likewise.
* testsuite/ld-i386/ibt-plt-3b.d: Likewise.
* testsuite/ld-i386/ibt-plt-3c.d: Likewise.
* testsuite/ld-i386/ibt-plt-3d.d: Likewise.
* testsuite/ld-i386/plt-main-ibt.dd: Likewise.
* testsuite/ld-i386/plt-pie-ibt.dd: Likewise.
* testsuite/ld-i386/property-x86-empty.s: Likewise.
* testsuite/ld-i386/property-x86-ibt.s: Likewise.
* testsuite/ld-i386/property-x86-ibt1a.d: Likewise.
* testsuite/ld-i386/property-x86-ibt1b.d: Likewise.
* testsuite/ld-i386/property-x86-ibt2.d: Likewise.
* testsuite/ld-i386/property-x86-ibt3a.d: Likewise.
* testsuite/ld-i386/property-x86-ibt3b.d: Likewise.
* testsuite/ld-i386/property-x86-ibt4.d: Likewise.
* testsuite/ld-i386/property-x86-ibt5.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-2.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-2a-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2a.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2b-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2b.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2d.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-3a-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3a.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3b-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3b.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d.d: Likewise.
* testsuite/ld-x86-64/plt-main-ibt-now.rd: Likewise.
* testsuite/ld-x86-64/plt-main-ibt-x32.dd: Likewise.
* testsuite/ld-x86-64/plt-main-ibt.dd: Likewise.
* testsuite/ld-x86-64/property-x86-empty.s: Likewise.
* testsuite/ld-x86-64/property-x86-ibt.s: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1a-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1a.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1b-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1b.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt2-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt2.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3a-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3a.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3b-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3b.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt4-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt4.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt5-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt5.d: Likewise.
* emulparams/elf32_x86_64.sh: Source emulparams/cet.sh.
(TINY_READONLY_SECTION): Add .plt.sec.
* emulparams/elf_i386.sh: Likewise.
* emulparams/elf_x86_64.sh: Source emulparams/cet.sh.
* ld.texinfo: Document -z ibtplt and -z ibt.
* testsuite/ld-i386/i386.exp: Run IBT and IBT PLT tests.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-x86-64/pr21481b.S (check): Updated for x32.
Use DWARF_VMA_FMT to report error to work for both 32-bit and 64-bit
builds.
* dwarf.c (READ_ULEB): Use DWARF_VMA_FMT to report error.
(READ_SLEB): Likewise.
PR binutils/21648
* dwarf.c (LEB): Rename to SKIP_ULEB and READ_ULEB. Add check for
reading a value that is too big for the containing variable.
(SLEB): Rename to SKIP_SLEB and READ_SLEB. Add similar check.
Replace uses of LEB and SLEB with appropriate new macro.
(display_debug_frames): Use an unsigned int for the 'reg'
variable. Use a signed long for the 'l' variable.
Currently print_insn_arc relies on BFD mach and ELF private headers to
distinguish between various ARC architectures. Sometimes those values are not
correct or available, mainly in the case of debugging targets without and ELF
file available. Changing a BFD mach is not a problem for the debugger, because
this is a generic BFD field, and GDB, for example, already sets it according to
information provided in XML target description or specified via GDB 'set arch'
command. However, things are more complicated for ELF private headers, since
it requires existing of an actual ELF file. To workaround this problem this
patch allows CPU model to be specified via disassemble info options. If CPU is
specified in options, then it will take a higher precedence than whatever might
be specified in ELF file.
This is mostly needed for ARC EM and ARC HS, because they have the same
"architecture" (mach) ARCv2 and differ in their private ELF headers. Other ARC
architectures can be distinguished between each other purely via "mach" field.
Proposed disassemble option format is "cpu=<CPU>", where CPU can be any valid
ARC CPU name as supported by GAS. Note that this creates a seeming redundancy
with objdump -m/--architecture option, however -mEM and -mHS still result in
"ARCv2" architecture internally, while -Mcpu={HS,EM} would have an actual
effect on disassembler.
opcodes/ChangeLog:
yyyy-mm-dd Anton Kolesov <anton.kolesov@synopsys.com>
* arc-dis.c (enforced_isa_mask): Declare.
(cpu_types): Likewise.
(parse_cpu_option): New function.
(parse_disassembler_options): Use it.
(print_insn_arc): Use enforced_isa_mask.
(print_arc_disassembler_options): Document new options.
binutils/ChangeLog:
yyyy-mm-dd Anton Kolesov <anton.kolesov@synopsys.com>
* doc/binutils.texi: Document new cpu=... disassembler options for ARC.
We can't use stat() to get archive element size. Add bfd_get_file_size
to get size for both normal files and archive elements.
bfd/
PR binutils/21519
* bfdio.c (bfd_get_file_size): New function.
* bfd-in2.h: Regenerated.
binutils/
PR binutils/21519
* objdump.c (dump_relocs_in_section): Replace get_file_size
with bfd_get_file_size to get archive element size.
* testsuite/binutils-all/objdump.exp (test_objdump_f): New
proc.
(test_objdump_h): Likewise.
(test_objdump_t): Likewise.
(test_objdump_r): Likewise.
(test_objdump_s): Likewise.
Add objdump tests on archive.
Nowadays, opcodes/disassemble.c:disassembler selects the proper
disassembler according to ABFD only. However, it actually
selects disassemblers according to arch, mach, endianess, and
abfd. This patch adds them to the parameters of disassembler,
so that its caller can still select disassemblers in case that
abfd is NULL (a typical case in GDB).
There isn't any functionality change.
binutils:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* objdump.c (disassemble_data): Caller update.
include:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* dis-asm.h (disassembler): Update declaration.
opcodes:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* disassemble.c (disassembler): Add arguments a, big and mach.
Use them.
sim/common:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* sim-trace.c (trace_disasm): Caller update.
This patch removes a workaround recently installed in objcopy that
avoided removing duplicated notes in targets for which the number of
internal relocations may be bigger than the number of external
relocations. With the recent fixes in sparc64 and mips64, this
workaround is no longer necessary.
2017-05-19 Jose E. Marchesi <jose.marchesi@oracle.com>
* objcopy.c (merge_gnu_build_notes): Remove workaround that
prevented deleting relocations in duplicated notes in mips64 and
sparc.
Revert parts of commit fee24f1c5b ("objdump improvements for mips
elf64"), <https://sourceware.org/ml/binutils/2003-03/msg00108.html>, and
make the `->reloc_count' member of `struct bfd_section' hold the actual
number of internal relocations stored in its `->relocation' vector. To
do so adjust `mips_elf64_slurp_one_reloc_table' to set `->reloc_count'
to the actual number of internal relocations retrieved and discard
`mips_elf64_canonicalize_reloc', `mips_elf64_canonicalize_dynamic_reloc'
and their corresponding target macros. Contrary to the description of
`mips_elf64_slurp_one_reloc_table', adjusted appropriately, this makes
generic relocation processing code happy and satisfies the "merge notes
section" binutils test case.
Add extra binutils test cases to expand the coverage of the generic
"merge notes section" test case, now passing with the n64 ABI, across
the MIPS o32, n32 and n64 ABIs regardless of the default ABI selected in
target configuration, and also to verify correctness of the relocations
produced. Conversely, do not provide any additional test cases for the
original issue addressed with the commit referred:
- objdump would display only 1/3 of the total number of relocations,
because it used the external relocation count, but each external
relocation is brought in as 3 internal relocations.
as n64 ABI relocation processing with `objdump -r' and `objdump -R' is
already widely covered across the GAS and LD test suites.
bfd/
* elf64-mips.c (mips_elf64_canonicalize_reloc): Remove prototype
and function.
(mips_elf64_canonicalize_dynamic_reloc): Likewise.
(mips_elf64_slurp_one_reloc_table): Set `reloc_count' to the
actual number of internal relocations retrieved. Adjust
function description.
(bfd_elf64_canonicalize_reloc): Remove macro.
(bfd_elf64_canonicalize_dynamic_reloc): Likewise.
binutils/
* testsuite/binutils-all/mips/mips-note-2.d: New test.
* testsuite/binutils-all/mips/mips-note-2r.d: New test.
* testsuite/binutils-all/mips/mips-note-2-n32.d: New test.
* testsuite/binutils-all/mips/mips-note-2-n64.d: New test.
* testsuite/binutils-all/mips/mips-note-2r-n32.d: New test.
* testsuite/binutils-all/mips/mips-note-2r-n64.d: New test.
* testsuite/binutils-all/mips/mips.exp: Define `has_newabi'.
Run the new tests.
We have but ELF binutils tests in the MIPS subset, and non-ELF MIPS/GAS
ports are gone, making a future addition of any non-ELF tests unlikely.
Bail out right away then if non-ELF, consuming one level of indentation
across the actual tests run.
binutils/
* testsuite/binutils-all/mips/mips.exp: Bail out right away if
non-ELF.
Verify MIPS16e2 ASE instruction assembly, disassembly and object file
flags.
binutils/
* testsuite/binutils-all/mips/mips16-undecoded.d: Add `-mips3'
to `as' flags.
* testsuite/binutils-all/mips/mips16e2-undecoded.d: New test.
* testsuite/binutils-all/mips/mips16e2-extend-insn.d: New test.
* testsuite/binutils-all/mips/mips16-undecoded.s: Remove
`.module mips3'.
* testsuite/binutils-all/mips/mips.exp: Run the new tests.
gas/
* testsuite/gas/mips/mips16e2.d: New test.
* testsuite/gas/mips/mips16e2-mt.d: New test.
* testsuite/gas/mips/mips16e2-sub.d: New test.
* testsuite/gas/mips/mips16e2@mips16e2-sub.d: New test.
* testsuite/gas/mips/mips16e2-mt-sub.d: New test.
* testsuite/gas/mips/mips16e2@mips16e2-mt-sub.d: New test.
* testsuite/gas/mips/mips16e2-hilo.d: New test.
* testsuite/gas/mips/mips16e2-hilo-n32.d: New test.
* testsuite/gas/mips/mips16e2-reloc-error.d: New test.
* testsuite/gas/mips/mips16e2-imm-error.d: New test.
* testsuite/gas/mips/elf_ase_mips16e2.d: New test.
* testsuite/gas/mips/elf_ase_mips16e2-2.d: New test.
* testsuite/gas/mips/elf-rel9-mips16e2.d: New test.
* testsuite/gas/mips/mips16e2-lui.d: New test.
* testsuite/gas/mips/mips16e2@mips32r2-sync.d: New test.
* testsuite/gas/mips/mips16e2@mips32r2-sync-1.d: New test.
* testsuite/gas/mips/mips16e2@lui-2.d: New test.
* testsuite/gas/mips/mips16e2-reloc-error.l: New stderr output.
* testsuite/gas/mips/mips16e2-imm-error.l: New stderr output.
* testsuite/gas/mips/mips16e2@lui-2.l: New stderr output.
* testsuite/gas/mips/mips16e2.s: New test source.
* testsuite/gas/mips/mips16e2-mt.s: New test source.
* testsuite/gas/mips/mips16e2-sub.s: New test source.
* testsuite/gas/mips/mips16e2-mt-sub.s: New test source.
* testsuite/gas/mips/mips16e2-hilo.s: New test source.
* testsuite/gas/mips/mips16e2-reloc-error.s: New test source.
* testsuite/gas/mips/mips16e2-imm-error.s: New test source.
* testsuite/gas/mips/elf-rel9-mips16e2.s: New test source.
* testsuite/gas/mips/mips16e2-lui.s: New test source.
* testsuite/gas/mips/mips.exp: Expand `mips32r2-sync',
`mips32r2-sync-1', `lui-1' and `lui-2' tests across MIPS16e2
architectures. Run the new tests.
Add MIPS16e2 ASE support as per the architecture specification[1],
including in particular:
1. A new ELF ASE flag to mark MIPS16e2 binaries.
2. MIPS16e2 instruction assembly support, including a relaxation update
to use LUI rather than an LI/SLL instruction pair for loading the
high part of 32-bit addresses.
3. MIPS16e2 instruction disassembly support, including updated rules for
extended forms of instructions that are now subdecoded and therefore
do not alias to the original MIPS16 ISA revision instructions even
for encodings that are not valid in the MIPS16e2 instruction set.
Add `-mmips16e2' and `-mno-mips16e2' GAS command-line options and their
corresponding `mips16e2' and `no-mips16e2' settings for the `.set' and
`.module' pseudo-ops. Control the availability of the MT ASE subset of
the MIPS16e2 instruction set with a combination of these controls and
the preexisting MT ASE controls.
Parts of this change by Matthew Fortune and Andrew Bennett.
References:
[1] "MIPS32 Architecture for Programmers: MIPS16e2 Application-Specific
Extension Technical Reference Manual", Imagination Technologies
Ltd., Document Number: MD01172, Revision 01.00, April 26, 2016
include/
* elf/mips.h (AFL_ASE_MIPS16E2): New macro.
(AFL_ASE_MASK): Adjust accordingly.
* opcode/mips.h: Document new operand codes defined.
(mips_operand_type): Add OP_REG28 enum value.
(INSN2_SHORT_ONLY): Update description.
(ASE_MIPS16E2, ASE_MIPS16E2_MT): New macros.
bfd/
* elfxx-mips.c (print_mips_ases): Handle MIPS16e2 ASE.
opcodes/
* mips-dis.c (mips_arch_choices): Add ASE_MIPS16E2 and
ASE_MIPS16E2_MT flags to the unnamed MIPS16 entry.
(mips_convert_abiflags_ases): Handle the AFL_ASE_MIPS16E2 flag.
(print_insn_arg) <OP_REG28>: Add handler.
(validate_insn_args) <OP_REG28>: Handle.
(print_mips16_insn_arg): Handle MIPS16 instructions that require
32-bit encoding and 9-bit immediates.
(print_insn_mips16): Handle MIPS16 instructions that require
32-bit encoding and MFC0/MTC0 operand decoding.
* mips16-opc.c (decode_mips16_operand) <'>', '9', 'G', 'N', 'O'>
<'Q', 'T', 'b', 'c', 'd', 'r', 'u'>: Add handlers.
(RD_C0, WR_C0, E2, E2MT): New macros.
(mips16_opcodes): Add entries for MIPS16e2 instructions:
GP-relative "addiu" and its "addu" spelling, "andi", "cache",
"di", "ehb", "ei", "ext", "ins", GP-relative "lb", "lbu", "lh",
"lhu", and "lw" instructions, "ll", "lui", "lwl", "lwr", "mfc0",
"movn", "movtn", "movtz", "movz", "mtc0", "ori", "pause",
"pref", "rdhwr", "sc", GP-relative "sb", "sh" and "sw"
instructions, "swl", "swr", "sync" and its "sync_acquire",
"sync_mb", "sync_release", "sync_rmb" and "sync_wmb" aliases,
"xori", "dmt", "dvpe", "emt" and "evpe". Add split
regular/extended entries for original MIPS16 ISA revision
instructions whose extended forms are subdecoded in the MIPS16e2
ISA revision: "li", "sll" and "srl".
binutils/
* readelf.c (print_mips_ases): Handle MIPS16e2 ASE.
* NEWS: Mention MIPS16e2 ASE support.
gas/
* config/tc-mips.c (RELAX_MIPS16_ENCODE): Add `e2' flag.
(RELAX_MIPS16_E2): New macro.
(RELAX_MIPS16_PIC, RELAX_MIPS16_SYM32, RELAX_MIPS16_NOMACRO)
(RELAX_MIPS16_USER_SMALL, RELAX_MIPS16_USER_EXT)
(RELAX_MIPS16_DSLOT, RELAX_MIPS16_JAL_DSLOT)
(RELAX_MIPS16_EXTENDED, RELAX_MIPS16_MARK_EXTENDED)
(RELAX_MIPS16_CLEAR_EXTENDED, RELAX_MIPS16_ALWAYS_EXTENDED)
(RELAX_MIPS16_MARK_ALWAYS_EXTENDED)
(RELAX_MIPS16_CLEAR_ALWAYS_EXTENDED, RELAX_MIPS16_MACRO)
(RELAX_MIPS16_MARK_MACRO, RELAX_MIPS16_CLEAR_MACRO): Shift bits.
(mips16_immed_extend): New prototype.
(options): Add OPTION_MIPS16E2 and OPTION_NO_MIPS16E2 enum
values.
(md_longopts): Add "mmips16e2" and "mno-mips16e2" options.
(mips_ases): Add "mips16e2" entry.
(mips_set_ase): Handle MIPS16e2 ASE.
(insn_insert_operand): Explicitly handle immediates with MIPS16
instructions that require 32-bit encoding.
(is_opcode_valid_16): Pass enabled ASE bitmask on to
`opcode_is_member'.
(validate_mips_insn): Explicitly handle immediates with MIPS16
instructions that require 32-bit encoding.
(operand_reg_mask) <OP_REG28>: Add handler.
(match_reg28_operand): New function.
(match_operand) <OP_REG28>: Add handler.
(append_insn): Pass ASE_MIPS16E2 setting to RELAX_MIPS16_ENCODE.
(match_mips16_insn): Handle MIPS16 instructions that require
32-bit encoding and `V' and `u' operand codes.
(mips16_ip): Allow any characters except from `.' in opcodes.
(mips16_immed_extend): Handle 9-bit immediates. Do not shuffle
immediates whose width is not one of these listed.
(md_estimate_size_before_relax): Handle MIPS16e2 relaxation.
(mips_relax_frag): Likewise.
(md_convert_frag): Likewise.
(mips_convert_ase_flags): Handle MIPS16e2 ASE.
* doc/as.texinfo (Target MIPS options): Add `-mmips16e2' and
`-mno-mips16e2' options.
(-mmips16e2, -mno-mips16e2): New options.
* doc/c-mips.texi (MIPS Options): Add `-mmips16e2' and
`-mno-mips16e2' options.
(MIPS ASE Instruction Generation Overrides): Add `.set mips16e2'
and `.set nomips16e2'.
Disassemble the MIPS16 BREAK and SDBBP instruction's immediate operand
in the hexadecimal rather than decimal numeral system and add respective
operandless variants with an implicit 0 operand, making our handling of
these instructions consistent with how we have processed their regular
MIPS and microMIPS counterparts since forever.
opcodes/
* mips16-opc.c (decode_mips16_operand) <'6'>: Switch the operand
type to hexadecimal.
(mips16_opcodes): Add operandless "break" and "sdbbp" entries.
binutils/
* testsuite/binutils-all/mips/mips16-extend-insn.d: Adjust BREAK
and SDBBP disassembly.
gas/
* testsuite/gas/mips/mips16.d: Adjust BREAK disassembly.
* testsuite/gas/mips/mips16-64@mips16.d: Likewise.
* testsuite/gas/mips/mips16-64.d: Likewise.
* testsuite/gas/mips/mips16-64@mips16-64.d: Likewise.
* testsuite/gas/mips/mips16-macro.d: Likewise.
* testsuite/gas/mips/mips16-64@mips16-macro.d: Likewise.
* testsuite/gas/mips/mips16-sub.d: Likewise.
* testsuite/gas/mips/mips16-32@mips16-sub.d: Likewise.
Define `tempfile' and `copyfile' in `mips.exp' so that standalone script
execution via `RUNTESTFLAGS=mips.exp' works rather than producing:
Running .../binutils/testsuite/binutils-all/mips/mips.exp ...
ERROR: tcl error sourcing
.../binutils/testsuite/binutils-all/mips/mips.exp.
ERROR: can't read "tempfile": no such variable
while executing
"binutils_assemble_flags ${srcfile} $tempfile $opts(as)"
(procedure "run_dump_test" line 207)
invoked from within
"run_dump_test "mips-ase-1""
invoked from within
"if [is_elf_format] {
run_dump_test "mips-ase-1"
run_dump_test "mips-ase-2"
run_dump_test "mips-ase-3"
run_dump_test "mixed-mips16"
..."
(file ".../binutils/testsuite/binutils-all/mips/mips.exp" line 22)
invoked from within
"source .../binutils/testsuite/binutils-all/mips/mips.exp"
("uplevel" body line 1)
invoked from within
"uplevel #0 source .../binutils/testsuite/binutils-all/mips/mips.exp"
invoked from within
"catch "uplevel #0 source $test_file_name""
testcase .../binutils/testsuite/binutils-all/mips/mips.exp completed in 0 seconds
binutils/
* testsuite/binutils-all/mips/mips.exp: Define `tempfile' and
`copyfile' variables.
The type of relcount is long and the type of sec->reloc_count is
unsigned int. On 32-bit hosts, GCC issues an error:
objcopy.c:2144:20: error: comparison between signed and unsigned integer expressions [-Werror=sign-compare]
if (relcount > sec->reloc_count)
Cast relcount to unsigned long to silence GCC.
* objcopy.c (merge_gnu_build_notes): Cast relcount to unsigned
long when comparing with sec->reloc_count.
Correct the disassembly of the PC-relative immediate argument of the
MIPS16 synthetic LA, LW, DLA and LD instructions and do not mask the
LSB, which in this case is a part of the data address rather than the
ISA bit and has to be fully presented.
opcodes/
* mips-dis.c (print_insn_arg): Only clear the ISA bit for jumps
and branches and not synthetic data instructions.
binutils/
* testsuite/binutils-all/mips/mips16-undecoded.d: Adjust the
disassembly of PC-relative LA and LW synthetic instructions.
PR binutils/21438
* dwarf.c (process_extended_line_op): Do not assume that the
string extracted from the section is NUL terminated.
(fetch_indirect_string): If the string retrieved from the section
is not NUL terminated, return an error message.
(fetch_indirect_line_string): Likewise.
(fetch_indexed_string): Likewise.
PR binutils/21407
* bucomm.c (get_file_size): Return -1 if file_name is NULL.
* ar.c (main): Fail with usage() invocation if no file names are
provided.
* readelf.c (process_section_headers): Warn about overlarge
sections.
(print_gnu_build_attribute_name): Print the number of unrecognised
note types. Fix formatting in the presence of errors.
(testsuite/binutils-all/note-2-32.s): Fix encoding of numeric notes.
(testsuite/binutils-all/note-2-64.s): Likewise.
A static, non-relocated global offset table will be embedded in static
binaries produced from objects containing any kind of GOT relocations,
generally PIC code. All symbols will have been resolved in static link
in such binaries making all GOT entries local and their values final as
there is no run-time load processing further performed.
Dump such GOT with `readelf -A' like already done with regular GOT, to
make it easier to examine static code that uses accesses via the GOT
pointer. There will be no dynamic segment or section in a static binary
to get the GOT pointer (DT_PLTGOT) from, so use section headers to find
a `.got' section instead.
binutils/
* readelf.c (process_mips_specific): Add static GOT support.
Unavailable data is handled gracefully in MIPS GOT processing done by
`print_mips_got_entry', so all that is needed in special GOT[1] handling
is to verify whether data can be retrieved for the purpose of the GNU
marker check done with `byte_get'. Remove the extra error reporting
code then, introduced with commit 75ec1fdbb7 ("Fix runtime seg-fault
in readelf when parsing a corrupt MIPS binary.") in the course of
addressing PR binutils/21344, and defer the error case to regular local
GOT entry processing.
binutils/
* readelf.c (process_mips_specific): Remove error reporting from
GOT[1] processing.
Null data is handled gracefully throughout in MIPS GOT processing, with
addresses printed normally and unavailable data shown as `<unknown>' by
`print_mips_got_entry', and special processing code for GOT[1] doing an
explicit check. Remove an unwanted null GOT data check then, introduced
with commit 592458412f in the course of addressing PR binutils/12855.
binutils/
* readelf.c (process_mips_specific): Remove null GOT data check.
Complement commit 986e18a5a9 ("Add a second 'pinfo' member to
mips_opcode to extend number of available bits"),
<https://sourceware.org/ml/binutils/2005-01/msg00261.html>, and annotate
MIPS16 NOP, LA, DLA and the synthetic forms of LD and LW instructions as
aliases. These correspond to MOVE, and the PC-relative ADDIU, DADDIU,
LD and LW hardware instructions respectively.
binutils/
* testsuite/binutils-all/mips/mips16-alias.d: New test.
* testsuite/binutils-all/mips/mips16-noalias.d: New test.
* testsuite/binutils-all/mips/mips16-alias.s: New test source.
* testsuite/binutils-all/mips/mips.exp: Run the new tests.
opcodes/
* mips16-opc.c (AL): New macro.
(mips16_opcodes): Mark "nop", "la", "dla", and synthetic forms
of "ld" and "lw" as aliases.
PR binutils/21379
* readelf.c (process_dynamic_section): Detect over large section
offsets in the DT_SYMTAB entry.
PR binutils/21345
* readelf.c (process_mips_specific): Catch an unfeasible memory
allocation before it happens and print a suitable error message.
* objcopy.c: Add --no-merge-notes option to disable note merging.
Add --[no-]merge-notes option to strip, and enable it by default.
(num_bytes): New function.
(merge_gnu_build_notes): Add code to merge stack size notes.
* binutils.texi: Update strip and objcopy documentation.
* readelf.c (print_gnu_build_attribute_name): Use defined
constants for note types.
objcopy/
* objcopy.c (struct redefine_node): Delete the field "next".
(redefine_sym_list): Deleted.
(redefine_specific_htab): New hash table.
(redefine_specific_reverse_htab): Likewise.
(eq_string_redefnode): New function.
(htab_hash_redefnode): Likewise.
(create_symbol2redef_htab): Likewise.
(add_specific_symbol_node): Likewise.
(create_symbol_htabs): Create redefine_specific_htab and
redefine_specific_reverse_htab.
(lookup_sym_redefinition): Use hash table instead of list.
(redefine_list_append): Likewise, and rename to add_redefine_and_check.
(copy_main): Use redefine_specific_htab instead of redefine_sym_list.
Update comments.
Mark an ALLOC section, which should be placed in special memory area,
with SHF_GNU_MBIND. Its sh_info field indicates the special memory
type. GNU_MBIND section names start with ".mbind" so that they are
placed as orphan sections by linker. All input GNU_MBIND sections
with the same sh_type, sh_flags and sh_info are placed in one output
GNU_MBIND section. In executable and shared object, create a
GNU_MBIND segment for each GNU_MBIND section and its segment type is
PT_GNU_MBIND_LO plus the sh_info value. Each GNU_MBIND segment is
aligned at page boundary.
The assembler syntax:
.section .mbind.foo,"adx",%progbits
^ 0: Special memory type.
|
'd' for SHF_GNU_MBIND.
.section .mbind.foo,"adx",%progbits,0x1
^ 1: Special memory type.
|
'd' for SHF_GNU_MBIND.
.section .mbind.bar,"adG",%progbits,.foo_group,comdat,0x2
^ 2: Special memory type.
|
'd' for SHF_GNU_MBIND.
bfd/
* elf.c (get_program_header_size): Add a GNU_MBIND segment for
each GNU_MBIND section and align GNU_MBIND section to page size.
(_bfd_elf_map_sections_to_segments): Create a GNU_MBIND
segment for each GNU_MBIND section.
(_bfd_elf_init_private_section_data): Copy sh_info from input
for GNU_MBIND section.
binutils/
* NEWS: Mention support for ELF SHF_GNU_MBIND and
PT_GNU_MBIND_XXX.
* readelf.c (get_segment_type): Handle PT_GNU_MBIND_XXX.
(get_elf_section_flags): Handle SHF_GNU_MBIND.
(process_section_headers): Likewise.
* testsuite/binutils-all/mbind1.s: New file.
* testsuite/binutils-all/objcopy.exp: Run readelf test on
mbind1.s.
gas/
* NEWS: Mention support for ELF SHF_GNU_MBIND.
* config/obj-elf.c (section_match): New.
(get_section): Match both sh_info and group name.
(obj_elf_change_section): Add argument for sh_info. Pass both
sh_info and group name to get_section. Issue an error for
SHF_GNU_MBIND section without SHF_ALLOC. Set sh_info.
(obj_elf_parse_section_letters): Set SHF_GNU_MBIND for 'd'.
(obj_elf_section): Support SHF_GNU_MBIND section info.
* config/obj-elf.h (obj_elf_change_section): Add argument for
sh_info.
* config/tc-arm.c (start_unwind_section): Pass 0 as sh_info to
obj_elf_change_section.
* config/tc-ia64.c (obj_elf_vms_common): Likewise.
* config/tc-microblaze.c (microblaze_s_data): Likewise.
(microblaze_s_sdata): Likewise.
(microblaze_s_rdata): Likewise.
(microblaze_s_bss): Likewise.
* config/tc-mips.c (s_change_section): Likewise.
* config/tc-msp430.c (msp430_profiler): Likewise.
* config/tc-rx.c (parse_rx_section): Likewise.
* config/tc-tic6x.c (tic6x_start_unwind_section): Likewise.
* doc/as.texinfo: Document 'd' for SHF_GNU_MBIND.
* testsuite/gas/elf/elf.exp: Run section12a, section12b and
section13.
* testsuite/gas/elf/section10.d: Updated.
* testsuite/gas/elf/section10.s: Likewise.
* testsuite/gas/elf/section12.s: New file.
* testsuite/gas/elf/section12a.d: Likewise.
* testsuite/gas/elf/section12b.d: Likewise.
* testsuite/gas/elf/section13.l: Likewise.
* testsuite/gas/elf/section13.d: Likewise.
* testsuite/gas/elf/section13.s: Likewise.
include/
* elf/common.h (PT_GNU_MBIND_NUM): New.
(PT_GNU_MBIND_LO): Likewise.
(PT_GNU_MBIND_HI): Likewise.
(SHF_GNU_MBIND): Likewise.
ld/
* NEWS: Mention support for ELF SHF_GNU_MBIND and
PT_GNU_MBIND_XXX.
* emultempl/elf32.em (gld${EMULATION_NAME}_place_orphan): Place
input GNU_MBIND sections with the same type, attributes and
sh_info field into a single output GNU_MBIND section.
* testsuite/ld-elf/elf.exp: Run mbind2a and mbind2b.
* testsuite/ld-elf/mbind1.s: New file.
* testsuite/ld-elf/mbind1a.d: Likewise.
* testsuite/ld-elf/mbind1b.d: Likewise.
* testsuite/ld-elf/mbind1c.d: Likewise.
* testsuite/ld-elf/mbind2a.s: Likewise.
* testsuite/ld-elf/mbind2b.c: Likewise.
This adds -Mraw for PowerPC objdump, a disassembler option to display
the underlying machine instruction rather than aliases. For example,
"rlwinm" always rather than "rotlwi" when the instruction is
performing a simple rotate.
binutils/
* doc/binutils.texi (objdump): Document PowerPC -M options.
gas/
* config/tc-ppc.c (md_parse_option): Reject -mraw.
include/
* opcode/ppc.h (PPC_OPCODE_RAW): Define.
(PPC_OPCODE_*): Make them all unsigned long long constants.
opcodes/
* ppc-dis.c (ppc_opts): Set PPC_OPCODE_PPC for "any" flags. Add
"raw" option.
(lookup_powerpc): Don't special case -1 dialect. Handle
PPC_OPCODE_RAW.
(print_insn_powerpc): Mask out PPC_OPCODE_ANY on first
lookup_powerpc call, pass it on second.
* readelf.c (print_gnu_build_attribute_name): Allow stack
protection notes to contain numeric values. Use a colon rather
than a space to separate a string name from its values. Decode
the numeric value of a stack protection note.
* objcopy.c (merge_gnu_build_notes): Allow version notes to
contain extra text after the protocol version number.
The fix for PR binutils/17512 added a check for the dynamic segment being
inside the actual ELF file. If not an error message would be produced:
readelf: Error: the dynamic segment offset + size exceeds the size of the file
Unfortunately for separate debuginfo files it is common for the dynamic
segment not being inside the file because the .dynamic section is NOBITS.
Since the check is done unconditionally in process_program_headers and
process_program_headers is always called (to setup dynamic_addr in case
it is needed). The error is produced on any operations done on any .debug
file (even if no program headers or the dynamic segment is used).
If there are section headers then a cross check is done to see if the
.dynamic section is NOBITS in which case dynamic_addr is set to zero
without a warning or error (which is then checked first before any
operation on the dynamic segement is done).
Move the check for the dynamic segment being inside the actual ELF file
after the cross check with the section headers to suppress the error for
.debug files.
binutils/ChangeLog:
* readelf.c (process_program_headers): Move dynamic_addr check
after .dynamic section cross check.
include * elf/common.h (GNU_BUILD_ATTRIBUTE_SHORT_ENUM): New GNU BUILD
note type.
binutils * readelf.c (print_gnu_build_attribute_name): Add support for
GNU_BUILD_ATTRIBUTE_SHORT_ENUM.
* readelf.c (print_gnu_build_attribute_description): Move symbol
printing code to...
(print_symbol_for_build_attribute): New function. ...here.
Add to find the best symbol to associate with an OPEN note.
Add code to cache the symbol table and string table, so that they
are not loaded every time a note is displayed.
* testsuite/binutils-all/note-2-32.s: Add a function symbol.
* testsuite/binutils-all/note-2-64.s: Likewise.
* testsuite/binutils-all/note-2-32.d: Update expected note output.
* testsuite/binutils-all/note-2-64.d: Likewise.
If the source file is more recent than the object file, line number
information in the object may no longer match the source. So print a
warning message.
* objdump.c (update_source_path): Add abfd param. Add struct
stat vars. Pass to try_print_file_open. Warn if source is more
recent than object.
(try_print_file_open, slurp_file): Add struct stat param to
return fstat.
(show_line): Call update_source_path with bfd.
Property type and datasz are always 4 bytes for both 32-bit and 64-bit
objects. Property values for GNU_PROPERTY_X86_ISA_1_USED and
GNU_PROPERTY_X86_ISA_1_NEEDED are 4 bytes for both i386 and x86-64
objects. We should also check GNU_PROPERTY_LOPROC and
GNU_PROPERTY_LOUSER.
binutils/
PR binutils/21231
* readelf.c (decode_x86_isa): Change argument to unsigned int.
(print_gnu_property_note): Retrieve property type and datasz as
4-byte integer. Consolidate property datasz check. Check
GNU_PROPERTY_LOPROC and GNU_PROPERTY_LOUSER.
* testsuite/binutils-all/i386/pr21231a.d: New file.
* testsuite/binutils-all/i386/pr21231a.s: Likewise.
* testsuite/binutils-all/i386/pr21231b.d: Likewise.
* testsuite/binutils-all/i386/pr21231b.s: Likewise.
* testsuite/binutils-all/x86-64/pr21231a.d: Likewise.
* testsuite/binutils-all/x86-64/pr21231a.s: Likewise.
* testsuite/binutils-all/x86-64/pr21231b.d: Likewise.
* testsuite/binutils-all/x86-64/pr21231b.s: Likewise.
include/
PR binutils/21231
* elf/common.h (GNU_PROPERTY_LOPROC): New.
(GNU_PROPERTY_HIPROC): Likewise.
(GNU_PROPERTY_LOUSER): Likewise.
(GNU_PROPERTY_HIUSER): Likewise.
* readelf.c (print_gnu_build_attribute_name): Read byte values
from the name string as unsigned bytes.
(process_notes_at): Use memcpy to copy an unterminated name
string.
This commit adds support to GDB so that it can modify the disassembler-options
value that is passed to the disassembler, similar to objdump's -M option.
Currently, the only supported targets are ARM, PowerPC and S/390, but
adding support for a new target(s) is not difficult.
include/
* dis-asm.h (disasm_options_t): New typedef.
(parse_arm_disassembler_option): Remove prototype.
(set_arm_regname_option): Likewise.
(get_arm_regnames): Likewise.
(get_arm_regname_num_options): Likewise.
(disassemble_init_s390): New prototype.
(disassembler_options_powerpc): Likewise.
(disassembler_options_arm): Likewise.
(disassembler_options_s390): Likewise.
(remove_whitespace_and_extra_commas): Likewise.
(disassembler_options_cmp): Likewise.
(next_disassembler_option): New inline function.
(FOR_EACH_DISASSEMBLER_OPTION): New macro.
opcodes/
* disassemble.c Include "safe-ctype.h".
(disassemble_init_for_target): Handle s390 init.
(remove_whitespace_and_extra_commas): New function.
(disassembler_options_cmp): Likewise.
* arm-dis.c: Include "libiberty.h".
(NUM_ELEM): Delete.
(regnames): Use long disassembler style names.
Add force-thumb and no-force-thumb options.
(NUM_ARM_REGNAMES): Rename from this...
(NUM_ARM_OPTIONS): ...to this. Use ARRAY_SIZE.
(get_arm_regname_num_options): Delete.
(set_arm_regname_option): Likewise.
(get_arm_regnames): Likewise.
(parse_disassembler_options): Likewise.
(parse_arm_disassembler_option): Rename from this...
(parse_arm_disassembler_options): ...to this. Make static.
Use new FOR_EACH_DISASSEMBLER_OPTION macro to scan over options.
(print_insn): Use parse_arm_disassembler_options.
(disassembler_options_arm): New function.
(print_arm_disassembler_options): Handle updated regnames.
* ppc-dis.c: Include "libiberty.h".
(ppc_opts): Add "32" and "64" entries.
(ppc_parse_cpu): Use ARRAY_SIZE and disassembler_options_cmp.
(powerpc_init_dialect): Add break to switch statement.
Use new FOR_EACH_DISASSEMBLER_OPTION macro.
(disassembler_options_powerpc): New function.
(print_ppc_disassembler_options): Use ARRAY_SIZE.
Remove printing of "32" and "64".
* s390-dis.c: Include "libiberty.h".
(init_flag): Remove unneeded variable.
(struct s390_options_t): New structure type.
(options): New structure.
(init_disasm): Rename from this...
(disassemble_init_s390): ...to this. Add initializations for
current_arch_mask and option_use_insn_len_bits_p. Remove init_flag.
(print_insn_s390): Delete call to init_disasm.
(disassembler_options_s390): New function.
(print_s390_disassembler_options): Print using information from
struct 'options'.
* po/opcodes.pot: Regenerate.
binutils/
* objdump.c (main): Use remove_whitespace_and_extra_commas.
gdb/
* NEWS: Mention new set/show disassembler-options commands.
* doc/gdb.texinfo: Document new set/show disassembler-options commands.
* disasm.c: Include "arch-utils.h", "gdbcmd.h" and "safe-ctype.h".
(prospective_options): New static variable.
(gdb_disassembler::gdb_disassembler): Initialize
m_di.disassembler_options.
(gdb_buffered_insn_length_init_dis): Initilize di->disassembler_options.
(get_disassembler_options): New function.
(set_disassembler_options): Likewise.
(set_disassembler_options_sfunc): Likewise.
(show_disassembler_options_sfunc): Likewise.
(disassembler_options_completer): Likewise.
(_initialize_disasm): Likewise.
* disasm.h (get_disassembler_options): New prototype.
(set_disassembler_options): Likewise.
* gdbarch.sh (gdbarch_disassembler_options): New variable.
(gdbarch_verify_disassembler_options): Likewise.
* gdbarch.c: Regenerate.
* gdbarch.h: Likewise.
* arm-tdep.c (num_disassembly_options): Delete.
(set_disassembly_style): Likewise.
(arm_disassembler_options): New static variable.
(set_disassembly_style_sfunc): Convert short style name into long
option name. Call set_disassembler_options.
(show_disassembly_style_sfunc): New function.
(arm_gdbarch_init): Call set_gdbarch_disassembler_options and
set_gdbarch_verify_disassembler_options.
(_initialize_arm_tdep): Delete regnames variable and update callers.
(arm_disassembler_options): Initialize.
(disasm_options): New variable.
(num_disassembly_options): Rename from this...
(num_disassembly_styles): ...to this. Compute by scanning through
disasm_options.
(valid_disassembly_styles): Initialize using disasm_options.
Remove calls to parse_arm_disassembler_option, get_arm_regnames and
set_arm_regname_option.
Pass show_disassembly_style_sfunc to the "disassembler" setshow command.
* rs6000-tdep.c (powerpc_disassembler_options): New static variable.
(rs6000_gdbarch_init): Call set_gdbarch_disassembler_options and
set_gdbarch_verify_disassembler_options.
* s390-tdep.c (s390_disassembler_options): New static variable.
(s390_gdbarch_init):all set_gdbarch_disassembler_options and
set_gdbarch_verify_disassembler_options.
gdb/testsuite/
* gdb.arch/powerpc-power.exp: Delete test.
* gdb.arch/powerpc-power.s: Likewise.
* gdb.disasm/disassembler-options.exp: New test.
* gdb.arch/powerpc-altivec.exp: Likewise.
* gdb.arch/powerpc-altivec.s: Likewise.
* gdb.arch/powerpc-altivec2.exp: Likewise.
* gdb.arch/powerpc-altivec2.s: Likewise.
* gdb.arch/powerpc-altivec3.exp: Likewise.
* gdb.arch/powerpc-altivec3.s: Likewise.
* gdb.arch/powerpc-power7.exp: Likewise.
* gdb.arch/powerpc-power7.s: Likewise.
* gdb.arch/powerpc-power8.exp: Likewise.
* gdb.arch/powerpc-power8.s: Likewise.
* gdb.arch/powerpc-power9.exp: Likewise.
* gdb.arch/powerpc-power9.s: Likewise.
* gdb.arch/powerpc-vsx.exp: Likewise.
* gdb.arch/powerpc-vsx.s: Likewise.
* gdb.arch/powerpc-vsx2.exp: Likewise.
* gdb.arch/powerpc-vsx2.s: Likewise.
* gdb.arch/powerpc-vsx3.exp: Likewise.
* gdb.arch/powerpc-vsx3.s: Likewise.
* gdb.arch/arm-disassembler-options.exp: Likewise.
* gdb.arch/powerpc-disassembler-options.exp: Likewise.
* gdb.arch/s390-disassembler-options.exp: Likewise.
binutils/
2017-02-27 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix compilation with GCC 4.4.7.
* dwarf.c (display_loclists_list, display_debug_rnglists_list):
Initialize begin and end.
PR 20881
* dlltool.c (secdata): Align .idata$6 on 2 byte boundary.
(make_one_lib_file): Export a symbol called __nm_<symbol> for use
with auto-importing.
On some targets, .string does not add a NUL string terminator.
* testsuite/binutils-all/dw5.S: Replace .string with .asciz.
Support hpux .comm variant.
* testsuite/binutils-all/readelf.exp: Define HPUX when assembling
dw5 test for hppa64-hpux.
(process_program_headers): Fix snafu - if the program headers are
not available then this is not a cause to fail.
(process_corefile_note_segments): Likewise.
Remove a trailing space or a leading pipe character from version flags
printed with `readelf --version-info'.
For example with the `mips-linux' target we get:
$ cat ver_def.s
.data
.globl new_foo
.type new_foo, %object
new_foo:
.symver new_foo, foo@@ver_foo
$ cat ver_def.ver
{ global: *foo*; local: *; };
$ as -o ver_def.o ver_def.s
$ ld -e 0 --export-dynamic --version-script=ver_def.ver -o ver_def ver_def.o
$ readelf -V ver_def
Version symbols section '.gnu.version' contains 4 entries:
Addr: 000000000000007e Offset: 0x01007e Link: 2 (.dynsym)
000: 0 (*local*) 2 (ver_foo) 1 (*global*) 2 (ver_foo)
Version definition section '.gnu.version_d' contains 2 entries:
Addr: 0x0000000000000088 Offset: 0x010088 Link: 3 (.dynstr)
000000: Rev: 1 Flags: BASE Index: 1 Cnt: 1 Name: ver_def
0x001c: Rev: 1 Flags: none Index: 2 Cnt: 1 Name: ver_foo
$
which includes an unnecessary space after `BASE'; both call sites
already provide suitable separation from output that follows. Also if
only unknown flags were present, then lone `| <unknown>' would be
printed.
binutils/
* readelf.c (get_ver_flags): Tidy the formatting of the string
returned
Make `isum' unsigned like data it is calculated from.
binutils/
* readelf.c (process_version_sections) <SHT_GNU_verdef>: Make
`isum' unsigned.
<SHT_GNU_verneed>: Likewise.
Fix a commit 74e1a04b97 ("More fixes for reading corrupt ELF files.")
`readelf --version-info' regression that caused "Version definition past
end of section" to be always printed at the end, even with good section
data.
For example with the `mips-linux' target we get:
$ cat ver_def.s
.data
.globl new_foo
.type new_foo, %object
new_foo:
.symver new_foo, foo@@ver_foo
$ cat ver_def.ver
{ global: *foo*; local: *; };
$ as -o ver_def.o ver_def.s
$ ld -e 0 --export-dynamic --version-script=ver_def.ver -o ver_def ver_def.o
$ readelf -V ver_def
Version symbols section '.gnu.version' contains 4 entries:
Addr: 000000000000007e Offset: 0x01007e Link: 2 (.dynsym)
000: 0 (*local*) 2 (ver_foo) 1 (*global*) 2 (ver_foo)
Version definition section '.gnu.version_d' contains 2 entries:
Addr: 0x0000000000000088 Offset: 0x010088 Link: 3 (.dynstr)
000000: Rev: 1 Flags: BASE Index: 1 Cnt: 1 Name: ver_def
0x001c: Rev: 1 Flags: none Index: 2 Cnt: 1 Name: ver_foo
Version definition past end of section
$
The cause is the `if (idx + ent.vd_next <= idx)' condition introduced to
ensure forward progress, which however always triggers for good version
definition section data as the last entry will have its `vd_next' value
set to 0.
Adjust the condition then, to say `if (idx + ent.vd_next < idx)' instead
and to ensure forward progress limit the number of entries processed to
the size of the version definition section, removing the problematic
message from output quoted above, while ensuring the original PR 17531
test case is still handled gracefully.
Add a suitable test case so that we have `readelf --version-info'
coverage; due to the lack of infrastructure needed to run the linker in
the `binutils' test suite and limited justification to implement it add
a new `readelf.exp' script to the `ld' test suite instead, intended to
gather any `readelf' test cases that require the linker to be run. If
ever we decide to have linker infrastructure added to the `binutils'
test suite, then the script can be moved between the test suites.
binutils/
* readelf.c (process_version_sections) <SHT_GNU_verdef>: Limit
the number of entries processed by the section size. Don't
break out of the loop if `ent.vd_next' is 0.
ld/
* testsuite/ld-elf/ver_def.d: New test.
* testsuite/ld-elf/ver_def.ld: New test linker script.
* testsuite/ld-elf/ver_def.ver: New test version script.
* testsuite/ld-elf/ver_def.s: New test source.
* testsuite/ld-elf/readelf.exp: New test script.
binutils/
2017-02-23 Jan Kratochvil <jan.kratochvil@redhat.com>
* testsuite/binutils-all/dw5.S: New file.
* testsuite/binutils-all/dw5.W: New file.
* testsuite/binutils-all/readelf.exp (readelf -wiaoRlL): New test.
binutils/
2017-02-23 Jan Kratochvil <jan.kratochvil@redhat.com>
* dwarf.c (decode_location_expression): Support DW_OP_implicit_pointer,
DW_OP_const_type, DW_OP_regval_type, DW_OP_deref_type, DW_OP_convert
and DW_OP_reinterpret.
(read_and_display_attr_value): Support DW_AT_call_value,
DW_AT_call_data_value, DW_AT_call_target and
DW_AT_call_target_clobbered.
binutils/
2017-02-23 Jan Kratochvil <jan.kratochvil@redhat.com>
* dwarf.c (fetch_indirect_line_string): New function.
(abbrev_attr): New field implicit_const.
(add_abbrev_attr): New parameter implicit_const.
(process_abbrev_section): Support DW_FORM_implicit_const.
(decode_location_expression): Support DW_OP_entry_value.
(read_and_display_attr_value): Add parameter implicit_const. Support
DW_FORM_line_strp and DW_FORM_implicit_const.
(read_and_display_attr): Add parameter implicit_const.
(process_debug_info): Support line_str and DWARF-5.
(read_debug_line_header): Support DWARF-5.
(display_formatted_table): New function.
(display_debug_lines_raw): New parameter file. Support DWARF-5.
(display_debug_lines_decoded): New parameter fileptr. Support DWARF-5.
(display_debug_lines): Pass file parameter.
(display_debug_macro): Update read_and_display_attr_value caller.
(display_debug_abbrev): Support DW_FORM_implicit_const.
(display_loclists_list): New function.
(display_loc_list): Support .debug_loclists.
(display_debug_ranges_list): New function from display_debug_ranges.
(display_debug_rnglists_list): New function.
(display_debug_ranges): Support .debug_rnglists.
(debug_displays): Add .debug_line_str, .debug_loclists and
.debug_rnglists.
* dwarf.h: Include dwarf2.h
(DWARF2_Internal_LineInfo): Add li_offset_size.
(DWARF2_Internal_CompUnit): Add cu_unit_type.
(enum dwarf_section_display_enum): Add line_str.
* readelf.c (process_section_headers): Add rnglists and loclists.
binutils/
2017-02-23 Jan Kratochvil <jan.kratochvil@redhat.com>
* dwarf.c (display_loc_list): Use dwarf_vma for offset, base_address
and off.
(display_loc_list_dwo): Use dwarf_vma for offset.
(display_debug_loc): Use dwarf_vma for offset, base_address.
(struct range_entry, range_entry_compar): Use dwarf_vma for
ranges_offset.
(display_debug_ranges): Use dwarf_vma for ranges_offset, offset and
base_address.
* readelf.c (display_tag_value): Use an explicit signed type for
the tag parameter.
(display_gnu_attributes): Use an unsigned integer type for
attribute tags.
(display_power_gnu_attribute): Likewise.
(display_s390_gnu_attribute): Likewise.
(display_sparc_hwcaps): Likewise.
(display_sparc_hwcaps2): Likewise.
(display_sparc_gnu_attribute): Likewise.
(display_mips_gnu_attribute): Likewise.
(display_tic6x_attribute): Likewise.
(display_raw_attribute): Likewise.
(process_attributes): Likewise.
(process_arm_specific): Delete redundant function.
(process_power_specific): Likewise.
(process_s390_specific): Likewise.
(process_sparc_specific): Likewise.
(process_tic6x_specific): Likewise.
(process_msp430x_specific): Likewise.
(display_public_gnu_attributes): New function. Displays known
information about an unknown gnu attribute.
(display_generic_attribute): New function. Calls
display_tag_value for non-nul tags.
(process_arch_specific): Call process_attributes even for
architectures not known to specifically support gnu attributes.
Fix a commit 74e1a04b97 ("More fixes for reading corrupt ELF files.")
`readelf --version-info' output formatting regression where a dropped
new line caused section header information from the `.gnu.version_d'
version definition section to be printed on the same line as this
section's first entry.
For example with the `mips-linux' target we get:
$ cat ver_def.s
.data
.globl new_foo
.type new_foo, %object
new_foo:
.symver new_foo, foo@@ver_foo
$ cat ver_def.ver
{ global: *foo*; local: *; };
$ as -o ver_def.o ver_def.s
$ ld -e 0 --export-dynamic --version-script=ver_def.ver -o ver_def ver_def.o
$ readelf -V ver_def
Version symbols section '.gnu.version' contains 4 entries:
Addr: 000000000000007e Offset: 0x01007e Link: 2 (.dynsym)
000: 0 (*local*) 2 (ver_foo) 1 (*global*) 2 (ver_foo)
Version definition section '.gnu.version_d' contains 2 entries:
Addr: 0x0000000000000088 Offset: 0x010088 Link: 3 (.dynstr) 000000: Rev: 1 Flags: BASE Index: 1 Cnt: 1 Name: ver_def
0x001c: Rev: 1 Flags: none Index: 2 Cnt: 1 Name: ver_foo
Version definition past end of section
$
Add the new line then, to get:
$ readelf -V ver_def
Version symbols section '.gnu.version' contains 4 entries:
Addr: 000000000000007e Offset: 0x01007e Link: 2 (.dynsym)
000: 0 (*local*) 2 (ver_foo) 1 (*global*) 2 (ver_foo)
Version definition section '.gnu.version_d' contains 2 entries:
Addr: 0x0000000000000088 Offset: 0x010088 Link: 3 (.dynstr)
000000: Rev: 1 Flags: BASE Index: 1 Cnt: 1 Name: ver_def
0x001c: Rev: 1 Flags: none Index: 2 Cnt: 1 Name: ver_foo
Version definition past end of section
$
instead.
binutils/
* readelf.c (process_version_sections) <SHT_GNU_verdef>: Print a
new line between the heading and the first version definition
entry.
PR binutils/21156
* dwarf.c (cu_tu_indexes_read): Move into...
(load_cu_tu_indexes): ... here. Change the variable into
tri-state. Change the function into boolean, returning
false if the indicies could not be loaded.
(find_cu_tu_set): Return NULL if the indicies could not be
loaded.
The direct references in objcopy kind of look like a hack to me, so
I'm calling these symbols internal too. Certainly they aren't named
and documented as a public BFD symbol today anyway.
So ... give these bfd-internal symbols with external linkage a _bfd_
prefix to avoid collisions in the global symbol namespace.
While at it, give them names that more closely match the corresponding
option name that toggles them.
Also while at it, fix a few related comment typos.
gdb/ChangeLog:
2017-02-17 Pedro Alves <palves@redhat.com>
* srec.c (Chunk): Rename to ...
(_bfd_srec_len): ... this.
(S3Forced): Rename to ...
(_bfd_srec_forceS3): ... this.
* objcopy.c: Adjust all references.
PR binutils/21155
* readelf.c (IN_RANGE): New macro. Tests for an address + offset
being within a given range.
(target_specific_reloc_handling): Use macro to test for underflow
as well as overflow of reloc offset.
