GCC 4.8 now adds linker plugin options by default, which conflict with the
--incremental tests in the testsuite. This patch checks whether the compiler
supports the -fno-use-linker-plugin option, and adds it to all link
commands.
2014-04-02 Cary Coutant <ccoutant@google.com>
* configure.ac (HAVE_PUBNAMES): Use C instead of C++.
(HAVE_NO_USE_LINKER_PLUGIN): Check for -fno-use-linker-plugin.
* configure: Regenerate.
* testsuite/Makefile.am (OPT_NO_PLUGINS): New macro for
-fno-use-linker-plugin.
(LINK1, CXXLINK1): Add it to the link command.
* testsuite/Makefile.in: Regenerate.
Check 8 and 16 bit PCREL fixes for overflow, since we bypass the
later overflow checks in write.c. Direct relocs are left alone,
as gcc has been known to take advantage of the silent overflows
when comparing addresses to constant ranges.
The problem was that gcc was generating assembler with missing unwind directives in it,
so that a gas_assert was being triggered. The patch replaces the assert with an error
message.
* config/tc-arm.c (create_unwind_entry): Report an error if an
attempt to recreate an unwind directive is encountered.
When a VDSO gets large enough that it doesn't entirely fit in one page,
but not so large that the part described by the program header exceeds
one page, then gdb/BFD doesn't read the section headers and symbol
table information. This patch cures that by passing the size of the
vdso to BFD, and fixes a number of other issues in the BFD code.
bfd/
* elfcode.h (bfd_from_remote_memory): Add "size" parameter.
Consolidate code handling possible section headers past end of
segment. Don't use p_align for page size guess, instead use
minpagesize. Take note of ld.so clearing section headers when
p_memsz > p_filesz. Handle file header specifying no section
headers. Handle zero p_align throughout. Default loadbase to
zero. Add comments. Rename contents_size to high_offset, and
make it a bfd_vma. Delete unnecessary bfd_set_error calls.
* bfd-in.h (bfd_elf_bfd_from_remote_memory): Update prototpe.
* elf-bfd.h (struct elf_backend_data <elf_backend_from_remote_memory>):
Likewise.
(_bfd_elf32_bfd_from_remote_memory): Likewise.
(_bfd_elf64_bfd_from_remote_memory): Likewise.
* elf.c (bfd_elf_bfd_from_remote_memory): Adjust.
* bfd-in2.h: Regnerate.
gdb/
* symfile-mem.c (symbol_file_add_from_memory): Add size parameter.
Pass to bfd_elf_bfd_from_remote_memory. Adjust all callers.
(struct symbol_file_add_from_memory_args): Add size field.
(find_vdso_size): New function.
(add_vsyscall_page): Attempt to find vdso size.
binutils/
* od-macho.c (OPT_DATA_IN_CODE): New macro.
(options): Add entry for data in code.
(mach_o_help): Ditto.
(data_in_code_kind_name): New array.
(dump_data_in_code): New function.
(dump_load_command): Handle data in code.
(mach_o_dump): Ditto.
(dump_header): Display a terminal newline.
it is possible that gdb gets mach exceptions from an unknown inferior. This
happens when an inferior creates a child and that child gets a signal.
So instead of reporting messages with unknown origins, simply reply to these
notifications. The kernel will then post the unix signal.
gdb/
* darwin-nat.c (darwin_encode_reply): Add prototype.
(darwin_decode_exception_message): Reply to unknown inferiors.
(darwin_decode_message): Handle message by id. Ignore message
to unknown inferior.
(darwin_wait): Discard unknown messages, add debug trace.
The current ppc64 single step over atomic sequence testcase is written
in C and breaks with some versions of gcc. Convert the test to
assembly and use stepi to step through it.
gdb/testsuite/
2014-04-01 Anton Blanchard <anton@samba.org>
* gdb.arch/ppc64-atomic-inst.c: Remove.
* gdb.arch/ppc64-atomic-inst.S: New file.
* gdb.arch/ppc64-atomic-inst.exp: Adapt for asm based testcase.
* NEWS: Mention it.
* solib.c (solib_read_symbols): Only print symbol loading messages
if requested.
(solib_add): If symbol loading is in "brief" mode, notify user
symbols are being loaded.
(reload_shared_libraries_1): Ditto.
* symfile.c (print_symbol_loading_off): New static global.
(print_symbol_loading_brief): New static global.
(print_symbol_loading_full): New static global.
(print_symbol_loading_enums): New static global.
(print_symbol_loading): New static global.
(print_symbol_loading_p): New function.
(symbol_file_add_with_addrs): Only print symbol loading messages
if requested.
(_initialize_symfile): Register "print symbol-loading" set/show
command.
* symfile.h (print_symbol_loading_p): Declare.
doc/
* gdb.texinfo (Symbols): Document set/show print symbol-loading.
testsuite/
* gdb.base/print-symbol-loading-lib.c: New file.
* gdb.base/print-symbol-loading-main.c: New file.
* gdb.base/print-symbol-loading.exp: New file.
would not honour the [no]execstack. Fully linked binaries use a special segment to indicate the
state of the stack, but relocatable object files only have sections, and .note.GNU-stack was not
being created.
* emultempl/elf32.em (_after_open): Create a .note.GNU-stack
section when performing a relocatable link with -z [no]execstack
specified.
Hi,
I find two fails in source-dir.exp on mingw32 host.
(gdb) directory /nOtExStInG/a /nOtExStInG/b /nOtExStInG/c^M
Warning: /nOtExStInG/a: No such file or directory.^M
Warning: /nOtExStInG/b: No such file or directory.^M
Warning: /nOtExStInG/c: No such file or directory.^M
Source directories searched: /nOtExStInG/a;/nOtExStInG/b;/nOtExStInG/c;$cdir;$cwd^M
(gdb) FAIL: gdb.base/source-dir.exp: directory /nOtExStInG/a /nOtExStInG/b /nOtExStInG/c
directory /nOtExStInG/b /nOtExStInG/d /nOtExStInG/c^M
Warning: /nOtExStInG/b: No such file or directory.^M
Warning: /nOtExStInG/d: No such file or directory.^M
Warning: /nOtExStInG/c: No such file or directory.^M
Source directories searched: /nOtExStInG/b;/nOtExStInG/d;/nOtExStInG/c;/nOtExStInG/a;$cdir;$cwd^M
(gdb) FAIL: gdb.base/source-dir.exp: directory /nOtExStInG/b /nOtExStInG/d /nOtExStInG/c
The regular expression expects ':' and ';' is path separator on Windows.
This patch is to allow ';' as a path separator in regular expression.
This patch is similar to Dan's patch to fix a similar problem here
Re: directory separators on minGW hosts
https://sourceware.org/ml/gdb-patches/2006-02/msg00359.html
It is obvious. Pushed it in.
gdb/testsuite:
2014-03-31 Yao Qi <yao@codesourcery.com>
* gdb.base/source-dir.exp: Allow ';' as a directory separator.
(enum options): add OPTION_RMW_ISA for -mrmw option.
(struct option md_longopts): Add mrmw option.
(md_show_usage): add -mrmw option description.
(md_parse_option): Update isa details if -mrmw option specified.
* doc/c-avr.texi: Add doc for new option -mrmw.
* gas/avr/avr.exp: Run new tests.
* gas/avr/rmw.d: Add test for additional ISA support.
* gas/avr/rmw.s: Ditto.
(enum options): add OPTION_RMW_ISA for -mrmw option.
(struct option md_longopts): Add mrmw option.
(md_show_usage): add -mrmw option description.
(md_parse_option): Update isa details if -mrmw option specified.
* doc/c-avr.texi: Add doc for new option -mrmw.
* gas/avr/avr.exp: Run new tests.
* gas/avr/rmw.d: Add test for additional ISA support.
* gas/avr/rmw.s: Ditto.
Given the following variable...
BT : Bounded := New_Bounded (Low => 1, High => 3);
... where type Bounded is defined as a simple unconstrained array:
type Bounded is array (Integer range <>) of Integer;
Creating a varobj for that variable, and immediately asking for
varobj updates, GDB says that our varobj changed types!
(gdb)
-var-create bt * bt
^done,name="bt",numchild="3",value="[3]",type="<ref> array (1 .. 3) of integer",has_more="0"
(gdb)
-var-update 1 *
^done,changelist=[{name="bt",value="[3]",in_scope="true",type_changed="true",new_type="<ref> array (1 .. 3) of integer",new_num_children="3",has_more="0"}]
The expected output for the -var-update command is, in this case:
(gdb)
-var-update 1 *
^done,changelist=[]
The problem occurs because the ada-varobj module does not handle
references, and while the references gets stripped when the varobj
gets created, it doesn't when computing varobj updates.
More specifically, when creating the varobj, varobj_create creates
a new value which is a reference to a TYPE_CODE_ARRAY. It then calls
install_new_value which calls coerce_ref with the following comment:
/* We are not interested in the address of references, and given
that in C++ a reference is not rebindable, it cannot
meaningfully change. So, get hold of the real value. */
if (value)
value = coerce_ref (value);
This leaves the varobj's type component still a ref, while
the varobj's value is now our array, without the ref. This explains
why the "value" field in the varobj indicates an array with 3 elements
"[3]" while the "type" field shows a ref to an array. Generally
speaking, most users have said that showing the ref was a useful
piece of information, so this patch is not touching this part.
Next, when the user issues the -var-update request, varobj_update
calls value_of_root to compute the varobj's new value as well as
determine whether the value's type has changed or not. What happens
in a nutshell is that it calls value_of_root_1 (which re-evaluates
the expression and returns the corresponding new value), finds that
the new value is not NULL, and thus asks whether it has mutated:
else if (varobj_value_has_mutated (var, value, value_type (value)))
This then indirectly delegates the determination to the language-specific
callback, which fails, because it does not handle references.
This patch fixes the issue by adjusting varobj_value_has_mutated to
expect references, and strip them when seen. This allows the various
language-specific implementations to remain unaware of references.
gdb/ChangeLog:
* varobj.c (varobj_value_has_mutated): If NEW_VALUE is
a reference, strip the reference layer before calling
the lang_ops value_has_mutated callback.
gdb/testsuite/ChangeLog:
* gdb.ada/mi_dyn_arr: New testcase.
This patch scans all input files for symbol reference warning if the
symbol reference doesn't exist in the current input file.
ld/
PR ld/16756
* ldmain.c (symbol_warning): New function.
(warning_callback): Use it. Scan all input files for a reference
to SYMBOL.
ld/testsuite/
PR ld/16756
* ld-plugin/lto.exp: Expect filename and line number for PR
ld/12760 test.
because it needs to windres tool (for some targets).
* Makefile.def (dependencies): Make all-ld depend on all-binutils
for WINDRES_FOR_TARGET in default-manifest.o rule.
* Makefile.in: Regenerate.
a call to sprintf was being made with a non-constant formatting string.
* config/tc-score.c (s3_parse_pce_inst): Add "%s" parameter to
sprintf in order to avoid a compile time warning.
nios2 uses software single step, so GDB is unable to single step to
the signal handler. In order to reflect this, teach
can_single_step_to_signal_handler to return zero for nios2 target.
gdb/testsuite:
2014-03-27 Yao Qi <yao@codesourcery.com>
* lib/gdb.exp (can_single_step_to_signal_handler): Return zero
if target is nios2-*-*.
This patche fixes the values of FDE pc in output of objdump -Wf. They now
match readelf ones.
binutils/
* objdump.c (load_specific_debug_section): Set address of section.
* config/tc-rl78.c (rl78_op): Issue an error message if a 16-bit
relocation is used on an 8-bit operand or vice versa.
(tc_gen_reloc): Use the RL78_16U relocation for RL78_CODE.
(md_apply_fix): Add support for RL78_HI8, RL78_HI16 and RL78_LO16.
produce spurious errors about truncated relocations. The relocations are
only truncated because they are being made against sections which are going
to be discarded so that base address is zero instead of the expected 64-bit
base value.
* cofflink.c (_bfd_coff_generic_relocate_section): Skip
relocations in discarded sections.
