Tested by building for --target=arm-eabi, and playing with the debug
output a bit.
gdb/
2013-09-06 Pedro Alves <palves@redhat.com>
* remote-sim.c (dump_mem, gdbsim_fetch_register)
(gdbsim_store_register, gdbsim_kill, gdbsim_load)
(gdbsim_create_inferior, gdbsim_open, gdbsim_close)
(gdbsim_detach, gdbsim_resume_inferior, gdbsim_wait)
(gdbsim_files_info, gdbsim_mourn_inferior): Send debug output to
gdb_stdlog.
These two are still written in the pre-auto-dependency-tracking style.
They probably were written before that, and committed afterwards
without adjustment. An easy oversight to make.
gdb/gdbserver/
2013-09-06 Pedro Alves <palves@redhat.com>
* Makefile.in (linux-btrace.o, mips-linux-watch.o): Remove
explicit header dependencies and use $COMPILE/$POSTCOMPILE.
Somehow, my builds yesterdays didn't trip on this...
../src/gdb/gdbserver/linux-amd64-ipa.c: In function ‘initialize_low_tracepoint’:
../src/gdb/gdbserver/linux-amd64-ipa.c:172:3: error: ‘ipa_tdesc’ undeclared (first use in this function)
../src/gdb/gdbserver/linux-amd64-ipa.c:172:3: note: each undeclared identifier is reported only once for each function it appears in
gdb/gdbserver/
2013-09-06 Pedro Alves <palves@redhat.com>
* linux-amd64-ipa.c: Include tracepoint.h.
* linux-i386-ipa.c: Include tracepoint.h.
This brings in some standard functionality hitherdo missing from
the CRIS/CRISv32 port thanks to the new call to gdbarch_init_osabi,
as well as clearly showing that there is Linux support for this
platform by virtue of the existence of a cris-linux-tdep.c file.
2013-09-06 Ricard Wanderlof <ricardw@axis.com>
* Makefile.in (ALL_TARGET_OBS): Add cris-linux-tdep.o.
* configure.tgt: Add cris-linux-tdep.o and linux-tdep.o to
gdb_target_obs for cris target.
* cris-tdep.c (struct gdbarch_tdep): Move to cris-tdep.h.
(cris_gdbarch_init): Move calls to
set_gdbarch_fetch_tls_load_module_address and
set_solib_svr4_fetch_link_map_offsets to cris-linux-tdep.c.
Add call to gdbarch_init_osabi.
* cris-linux-tdep.c: New file.
* cris-tdep.h: New file.
https://sourceware.org/ml/gdb-patches/2013-09/msg00179.html
gdb/ChangeLog
* cli/cli-interp.c (_initialize_cli_interp): Add a
command_loop_proc to interp_procs.
* event-top.c (cli_command_loop): Change signature to match
interp_command_loop_ftype.
* event-top.h (cli_command_loop): Same.
* interps.c (interp_new): Require every interpreter to have a
command_loop_proc.
(current_interp_command_loop): Just call the command_loop_proc on
the current interpreter.
* tui/tui-interp.c (_initialize_tui_interp): Add a
command_loop_proc to interp_procs.
One misspelled function call, and one superfluous typedef. The latter
causes an error of the following type when building:
linux-crisv32-low.c:372: error: conflicting types for 'elf_gregset_t'
/.../target/include/asm/elf.h:36:
error: previous declaration of 'elf_gregset_t' was here
2013-09-06 Ricard Wanderlof <ricardw@axis.com>
* linux-crisv32-low.c (elf_gregset_t): Delete typedef.
(initialize_low_arch): Call init_registers_crisv32 rather than
init_register_crisv32.
gdb/gdbserver/
2013-09-05 Pedro Alves <palves@redhat.com>
* server.h (gdb_client_data, handler_func, callback_handler_func)
(delete_file_handler, add_file_handler, append_callback_event)
(delete_callback_event, start_event_loop, initialize_event_loop):
Move to event-loop.h and include it.
* event-loop.h: New file.
gdb/gdbserver/
2013-09-05 Pedro Alves <palves@redhat.com>
* server.h (perror_with_name, error, fatal, warning, paddress)
(pulongest, plongest, phex_nz, pfildes): Move to utils.h, and
include it.
* utils.h: New file.
server.h nowadays includes gdb_locale.h, which already brings this in.
gdb/gdbserver/
2013-09-05 Pedro Alves <palves@redhat.com>
* server.h (_): Delete.
A couple years ago, dwarf_expr_fetch used to return a CORE_ADDR. It
was made to return a ULONGEST since, and the 'dwarf_regnum' local
adjusted accordingly, but, we kept printing it with paddress.
gdbarch_dwarf2_reg_to_regnum takes the register number as 'int', so
there's really no point in using ULONGEST/pulongest either.
gdb/
2013-09-05 Pedro Alves <palves@redhat.com>
* dwarf2loc.c (dwarf2_evaluate_loc_desc_full): 'dwarf_regnum'
local is now int instead of ULONGEST. Print it with %d
instead of paddress.
I noticed that value_of_register (used for getting values _of_
registers ($pc, $rax, etc.), rather than variables _in_ registers),
kind of builds a franken-value, by propagating the lval and address of
the frame register value, but not the entire location, like necessary
for lval_computed (if some unwinder ever returns that, the resulting
value will misbehave). This gets in the way of printing optimized out
(not saved) lval_registers differently from other optimized out
values, as it doesn't make sure the resulting value is lval_register.
I started out by just doing something like:
- VALUE_LVAL (reg_val) = lval;
- set_value_address (reg_val, addr);
+ VALUE_LVAL (reg_val) = lval_register;
... just like value_of_register_lazy below. That's sufficient to fix
the issue.
Then I noticed this is using frame_register, which we should avoid
nowadays, for it returns elements of a value, but not all that's
sometimes necessary (unavailable-ness is all or nothing with it, for
instance), and considered using get_frame_register_value instead
(which returns a struct value), and value_contents_copy, just like
value_fetch_lazy's handling of lval_register. But at that point, I
realized we might as well just defer all that work to
value_of_register_lazy/value_fetch_lazy...
Doing it this way adds a frame_find_by_id lookup (from within
value_fetch_lazy), while we already have a frame pointer handy in
value_of_register. I considered factoring out the lazy register
fetching out of value_fetch_lazy, into a function that takes a frame
pointer and call that instead, avoiding the lookup, but then it looked
like too much complication for an early optimization, and went back to
keeping it simple.
Tested on x86_64 Fedora 17.
gdb/
2013-09-05 Pedro Alves <palves@redhat.com>
* findvar.c (value_of_register): Rework in terms of
value_of_register_lazy.
I stumbled on the TUI's register-changed decision code before (used to
decided whether the register should be highlighted in the register
window), for it is trying to compare all the different possible states
and contents or previous/current register contents, and as such may
need updating whenever the value machinery changes to have more state.
It's just much simpler and more future proof to compare the
previous/current printable representation instead.
The bit in tui_register_format that returns early if the register has
no name gets a bit in the way of the new prototype (what to return in
that case? NULL, empty string, etc.?). Fortunately, that check isn't
really necessary. All the callers will have already skipped unnamed
registers.
gdb/
2013-09-05 Pedro Alves <palves@redhat.com>
* tui/tui-regs.c (tui_register_format): Don't look at the
register's name here. Return string representing register
value instead of storing it in the data element.
(tui_get_register): Compare register string representations
instead of register value states and contents.
I've stumbled on this by inspection.
When the TUI's register window is first displayed, it always shows the
registers of the current frame, instead of of the selected frame,
which is obviously bogus.
E.g.,
(gdb) step # into "function"
(gdb) up
(gdb) tui reg general # or C-x 2, C-x 2
shows the registers of "function", rather than the caller's.
A subsequent:
(gdb) frame
or
(gdb) down
(gdb) up
can be used as workaround to "fix" it.
gdb/
2013-09-05 Pedro Alves <palves@redhat.com>
PR tui/15933
* tui/tui-regs.c (tui_show_registers): Show registers of the
selected frame, not the current frame.
(queue_and_load_dwo_tu): New function.
(lookup_dwo_signatured_type): Set per_cu.tu_read.
(maybe_queue_comp_unit): Rename this_cu argument to dependent_cu.
Make dependent_cu optional.
(dw2_do_instantiate_symtab): If we just loaded a CU from a DWO,
and an older .gdb_index is in use, queue and load all its TUs too.
testsuite/
* gdb.base/enumval.c (ZERO): New enum value.
(main): Use it
* gdb.base/enumval.exp: Test ability to print ZERO.
gdb/
2013-09-04 Jan Kratochvil <jan.kratochvil@redhat.com>
Code cleanup: Change OPF_DISABLE_REALPATH to OPF_RETURN_REALPATH.
* cli/cli-cmds.c (find_and_open_script): Add OPF_RETURN_REALPATH to
variable search_flags.
* defs.h (OPF_DISABLE_REALPATH): Rename to ...
(OPF_RETURN_REALPATH): ... here.
* dwarf2read.c (try_open_dwop_file): Set OPF_RETURN_REALPATH for flags.
* exec.c (exec_file_attach): Remove OPF_DISABLE_REALPATH from openp
call. Twice.
* nto-tdep.c (nto_find_and_open_solib): Add OPF_RETURN_REALPATH for
openp call.
* solib.c (solib_find): Likewise. Four times.
* source.c (openp): Change OPF_DISABLE_REALPATH to OPF_RETURN_REALPATH
in the function comment and for the realpath_fptr variable.
(source_full_path_of): Add OPF_RETURN_REALPATH for openp call.
(find_and_open_source): Likewise. Twice.
* symfile.c (symfile_bfd_open): Likewise, also twice.
* config/tc-ppc.c (md_apply_fix): Handle defined after use toc
symbols.
gas/testsuite/
* gas/ppc/aix.exp: Run xcoff-toc-1 test.
* gas/ppc/xcoff-toc-1.s, gas/ppc/xcoff-toc-1.d: New test.
* config/tc-arm.c (T16_32_TAB): Add _udf.
(do_t_udf): New function.
(insns): Add "udf".
* gas/arm/udf-bad.s: New file.
* gas/arm/udf-bad.d: New file.
* gas/arm/udf-bad.l: New file.
* gas/arm/udf.s: New file.
* gas/arm/udf.d: New file.
* gas/arm/udf.l: New file.
* arm-dis.c (arm_opcodes): Add udf.
(thumb_opcodes): Use "udf" mnemonic rather than UNDEFINED_INSTRUCTION.
(thumb32_opcodes): Add udf.w.
(print_insn_thumb32): Handle %H as the thumb32_opcodes comment says.
Pedro Alves <palves@redhat.com>
* symfile.c (add_symbol_file_command): Error out on unknown
option. Handle EXPECTING_SEC_ADDR/EXPECTING_SEC_NAME before '-'
options and collapse into single conditional branch.
2013-09-13 Muhammad Bilal <mbilal@codesourcery.com>
Pedro Alves <palves@redhat.com>
* gdb.base/relocate.exp: Check that invalid options are
rejected.
2013-09-03 Pavel Chupin <pavel.v.chupin@intel.com>
PR gold/15927
* x86_64.cc (Target_x86_64<size>::Scan::global): Use relative
relocation for R_X86_64_32 on x32.
