The Makefile.in was generated using automake
after adding a few files.
When adding the ldreflect.* files, the autotools
versions were wrong.
After upgrading the host OS, autotools were upgraded to 2.71
reinstalling the desired 2.69 still generates a lot of changes.
Makefile.ini has therefore been manually edited.
Signed-off-by: Ulf Samuelsson <ulf@emagii.com>
The newer update-copyright.py fixes file encoding too, removing cr/lf
on binutils/bfdtest2.c and ld/testsuite/ld-cygwin/exe-export.exp, and
embedded cr in binutils/testsuite/binutils-all/ar.exp string match.
Enable compilation of ld/pdb.c just for x86, as is done for bfd/pdb.c.
This reduces the size of ld and is necessary with the following
patches that call a COFF-only bfd function from ld/pdb.c. Without it
we'd break every non-COFF target build.
The linker merges all the input .sframe sections. When merging, the
linker verifies that all the input .sframe sections have the same
abi/arch.
The linker uses libsframe library to perform key actions on the
.sframe sections - decode, read, and create output data. This
implies buildsystem changes to make and install libsframe before
libbfd.
The linker places the output .sframe section in a new segment of its
own: PT_GNU_SFRAME. A new segment is not added, however, if the
generated .sframe section is empty.
When a section is discarded from the final link, the corresponding
entries in the .sframe section for those functions are also deleted.
The linker sorts the SFrame FDEs on start address by default and sets
the SFRAME_F_FDE_SORTED flag in the .sframe section.
This patch also adds support for generation of SFrame unwind
information for the .plt* sections on x86_64. SFrame unwind info is
generated for IBT enabled PLT, lazy/non-lazy PLT.
The existing linker option --no-ld-generated-unwind-info has been
adapted to include the control of whether .sframe unwind information
will be generated for the linker generated sections like PLT.
Changes to the linker script have been made as necessary.
ChangeLog:
* Makefile.def: Add install dependency on libsframe for libbfd.
* Makefile.in: Regenerated.
* bfd/Makefile.am: Add elf-sframe.c
* bfd/Makefile.in: Regenerated.
* bfd/bfd-in2.h (SEC_INFO_TYPE_SFRAME): Regenerated.
* bfd/configure: Regenerate.
* bfd/configure.ac: Add elf-sframe.lo.
* bfd/elf-bfd.h (struct sframe_func_bfdinfo): New struct.
(struct sframe_dec_info): Likewise.
(struct sframe_enc_info): Likewise.
(struct elf_link_hash_table): New member for encoded .sframe
object.
(struct output_elf_obj_tdata): New member.
(elf_sframe): New access macro.
(_bfd_elf_set_section_sframe): New declaration.
* bfd/elf.c (get_segment_type): Handle new segment
PT_GNU_SFRAME.
(bfd_section_from_phdr): Likewise.
(get_program_header_size): Likewise.
(_bfd_elf_map_sections_to_segments): Likewise.
* bfd/elf64-x86-64.c (elf_x86_64_link_setup_gnu_properties): Add
contents to the .sframe sections or .plt* entries.
* bfd/elflink.c (elf_section_ignore_discarded_relocs): Handle
SEC_INFO_TYPE_SFRAME.
(_bfd_elf_default_action_discarded): Handle .sframe section.
(elf_link_input_bfd): Merge .sframe section.
(bfd_elf_final_link): Write the output .sframe section.
(bfd_elf_discard_info): Handle discarding .sframe section.
* bfd/elfxx-x86.c (_bfd_x86_elf_size_dynamic_sections): Create
.sframe section for .plt and .plt.sec.
(_bfd_x86_elf_finish_dynamic_sections): Handle .sframe from
.plt* sections.
* bfd/elfxx-x86.h (PLT_SFRAME_FDE_START_OFFSET): New
definition.
(SFRAME_PLT0_MAX_NUM_FRES): Likewise.
(SFRAME_PLTN_MAX_NUM_FRES): Likewise.
(struct elf_x86_sframe_plt): New structure.
(struct elf_x86_link_hash_table): New member.
(struct elf_x86_init_table): New members for .sframe
creation.
* bfd/section.c: Add new definition SEC_INFO_TYPE_SFRAME.
* binutils/readelf.c (get_segment_type): Handle new segment
PT_GNU_SFRAME.
* ld/ld.texi: Update documentation for
--no-ld-generated-unwind-info.
* ld/scripttempl/elf.sc: Support .sframe sections.
* ld/Makefile.am (TESTSFRAMELIB): Use it.
(check-DEJAGNU): Likewise.
* ld/Makefile.in: Regenerated.
* ld/configure.ac (TESTSFRAMELIB): Set to the .so or .a like TESTBFDLIB.
* ld/configure: Regenerated.
* bfd/elf-sframe.c: New file.
include/ChangeLog:
* elf/common.h (PT_GNU_SFRAME): New definition.
* elf/internal.h (struct elf_segment_map): Handle new segment
type PT_GNU_SFRAME.
ld/testsuite/ChangeLog:
* ld/testsuite/ld-bootstrap/bootstrap.exp: Add SFRAMELIB.
* ld/testsuite/ld-aarch64/aarch64-elf.exp: Add new test
sframe-simple-1.
* ld/testsuite/ld-aarch64/sframe-bar.s: New file.
* ld/testsuite/ld-aarch64/sframe-foo.s: Likewise.
* ld/testsuite/ld-aarch64/sframe-simple-1.d: Likewise.
* ld/testsuite/ld-sframe/sframe-empty.d: New test.
* ld/testsuite/ld-sframe/sframe-empty.s: New file.
* ld/testsuite/ld-sframe/sframe.exp: New testsuite.
* ld/testsuite/ld-x86-64/sframe-bar.s: New file.
* ld/testsuite/ld-x86-64/sframe-foo.s: Likewise.
* ld/testsuite/ld-x86-64/sframe-simple-1.d: Likewise.
* ld/testsuite/ld-x86-64/sframe-plt-1.d: Likewise.
* ld/testsuite/ld-x86-64/sframe-simple-1.d: Likewise.
* ld/testsuite/ld-x86-64/x86-64.exp: Add new tests -
sframe-simple-1, sframe-plt-1.
* ld/testsuite/lib/ld-lib.exp: Add new proc to check if
assembler supports SFrame section.
* ld/testsuite/ld-sframe/discard.d: New file.
* ld/testsuite/ld-sframe/discard.ld: Likewise.
* ld/testsuite/ld-sframe/discard.s: Likewise.
Allows aarch64-pe to be targeted natively, not having to use objcopy to convert it from ELF to PE.
Based on initial work by Jedidiah Thompson
Co-authored-by: Jedidiah Thompson <wej22007@outlook.com>
Co-authored-by: Zac Walker <zac.walker@linaro.org>
PR29397 PR29563: Add new configure option --with-zstd which defaults to
auto. If pkgconfig/libzstd.pc is found, define HAVE_ZSTD and support
zstd compressed debug sections for most tools.
* bfd: for addr2line, objdump --dwarf, gdb, etc
* gas: support --compress-debug-sections=zstd
* ld: support ELFCOMPRESS_ZSTD input and --compress-debug-sections=zstd
* objcopy: support ELFCOMPRESS_ZSTD input for
--decompress-debug-sections and --compress-debug-sections=zstd
* gdb: support ELFCOMPRESS_ZSTD input. The bfd change references zstd
symbols, so gdb has to link against -lzstd in this patch.
If zstd is not supported, ELFCOMPRESS_ZSTD input triggers an error. We
can avoid HAVE_ZSTD if binutils-gdb imports zstd/ like zlib/, but this
is too heavyweight, so don't do it for now.
```
% ld/ld-new a.o
ld/ld-new: a.o: section .debug_abbrev is compressed with zstd, but BFD is not built with zstd support
...
% ld/ld-new a.o --compress-debug-sections=zstd
ld/ld-new: --compress-debug-sections=zstd: ld is not built with zstd support
% binutils/objcopy --compress-debug-sections=zstd a.o b.o
binutils/objcopy: --compress-debug-sections=zstd: binutils is not built with zstd support
% binutils/objcopy b.o --decompress-debug-sections
binutils/objcopy: zstd.o: section .debug_abbrev is compressed with zstd, but BFD is not built with zstd support
...
```
Commit 04f096fb9e ("Move the xc16x target to the obsolete list") moved
the architecture from the "obsolete but still available" to the
"obsolete / support removed" list in config.bfd, making the architecture
impossible to enable (except maybe via "enable everything" options").
Note that I didn't touch */po/*.po{,t} on the assumption that these
would be updated by some (half)automatic means.
Generate a .note.package FDO package metadata ELF note, following
the spec: https://systemd.io/ELF_PACKAGE_METADATA/
If the jansson library is available at build time (and it is explicitly
enabled), link ld to it, and use it to validate that the input is
correct JSON, to avoid writing garbage to the file. The
configure option --enable-jansson has to be used to explicitly enable
it (error out when not found). This allows bootstrappers (or others who
are not interested) to seamlessly skip it without issues.
The result of running etc/update-copyright.py --this-year, fixing all
the files whose mode is changed by the script, plus a build with
--enable-maintainer-mode --enable-cgen-maint=yes, then checking
out */po/*.pot which we don't update frequently.
The copy of cgen was with commit d1dd5fcc38ead reverted as that commit
breaks building of bfp opcodes files.
Move the 64-bit bfd logic out of bfd/configure.ac and into bfd64.m4
under config so it can be shared between all the other subdirs.
This replaces want64 with enable_64_bit_bfd which was already being
declared, but not used directly.
A couple of files changed on my latest --enable-maintainer-mode
build. ld/Makefile.in had a missing dependency but better sorting of
the loongson entries.
intl/
* configure: Regenerate.
ld/
* Makefile.am: Sort loongson entries.
* Makefile.in: Regenerate.
--enable-targets=all on a 32-bit host results in a link failure with
undefined references due to elfxx-mips.c not being compiled. This
patch fixes that by putting eelf_mipsel_haiki.c in the correct
EMULATION_SOURCES Makefile variable. I've also added a bunch of
missing file dependencies and sorted a few things so that it's easier
to verify dependencies are present.
* Makfile.am: Add missing haiku dependencies, sort.
(ALL_EMULATION_SOURCES): Sort. Move eelf_mipsel_haiku.c to..
(ALL_64_EMULATION_SOURCES): ..here. Sort.
* Makfile.in: Regenerate.
Fixes a few issues:
1) If you use "-fsanitize=address,undefined" in CFLAGS, the Makefile
attempt to trim off -fsanitize options left us with ",undefined".
2) ld_compile adds CFLAGS_FOR_TARGET itself, no need to pass it.
3) CFLAGS might be needed linking bootstrap test.
* Makefile.am (CFLAGS_FOR_TARGET, CXXFLAGS_FOR_TARGET): Trim off
all -fsanitize=*.
* Makefile.in: Regenerate.
* testsuite/ld-bootstrap/bootstrap.exp: Use CFLAGS when linking.
* testsuite/ld-cdtest/cdtest.exp: Use CFLAGS_FOR_TARGET when
linking.
* testsuite/ld-auto-import/auto-import.exp: Don't pass
CFLAGS_FOR_TARGET to ld_compile.
* testsuite/ld-cygwin/exe-export.exp: Likewise.
* testsuite/ld-elfvers/vers.exp: Likewise.
* testsuite/ld-elfvsb/elfvsb.exp: Likewise.
* testsuite/ld-elfweak/elfweak.exp: Likewise.
* testsuite/ld-gc/gc.exp: Likewise.
* testsuite/ld-pe/pe-compile.exp: Likewise.
* testsuite/ld-pe/pe-run.exp: Likewise.
* testsuite/ld-pe/pe-run2.exp: Likewise.
* testsuite/ld-plugin/plugin.exp: Likewise.
* testsuite/ld-shared/shared.exp: Likewise.
* testsuite/ld-elfcomm/elfcomm.exp: Likewise, and don't allow
nios2 testing to trash CFLAGS_FOR_TARGET.
* testsuite/ld-scripts/crossref.exp: Don't pass options in
CC_FOR_TARGET, do so in CFLAGS_FOR_TARGET instead.
* testsuite/ld-srec/srec.exp: Likewise, and for CXX.
The top level Makefile, the ld Makefile and others, define
CC_FOR_TARGET to be a compiler for the binutils target machine. This
is the compiler that should be used for almost all tests with C
source. There are _FOR_TARGET versions of CFLAGS, CXX, and CXXFLAGS
too. This was all supposed to work with the testsuite .exp files
using CC for the target compiler, and CC_FOR_HOST for the host
compiler, with the makefiles passing CC=$CC_FOR_TARGET and
CC_FOR_HOST=$CC to the runtest invocation.
One exception to the rule of using CC_FOR_TARGET is the native-only ld
bootstrap test, which uses the newly built ld to link a copy of
itself. Since the files being linked were created with the host
compiler, the boostrap test should use CC and CFLAGS, in case some
host compiler option provides needed libraries automatically.
However, bootstrap.exp used CC where it should have used CC_FOR_HOST.
I set about fixing that problem, then decided that playing games in
the makefiles with CC was a bad idea. Not only is it confusing, but
other dejagnu code knows about CC_FOR_TARGET. See dejagnu/target.exp.
So this patch gets rid of the makefile variable renaming and changes
all the .exp files to use the correct _FOR_TARGET variables.
CC_FOR_HOST and CFLAGS_FOR_HOST disappear. A followup patch will
correct bootstrap.exp to use CFLAGS, and a number of other things I
noticed.
binutils/
* testsuite/lib/binutils-common.exp (run_dump_test): Use
CC_FOR_TARGET and CFLAGS_FOR_TARGET rather than CC and CFLAGS.
ld/
* Makefile.am (check-DEJAGNU): Don't set CC to CC_FOR_TARGET
and similar. Pass variables with unchanged names. Don't set
CC_FOR_HOST or CFLAGS_FOR_HOST.
* Makefile.in: Regenerate.
* testsuite/config/default.exp: Update default CC and similar.
(compiler_supports, plug_opt): Use CC_FOR_TARGET.
* testsuite/ld-cdtest/cdtest.exp: Replace all uses of CC with
CC_FOR_TARGET, and similarly for CFLAGS, CXX and CXXFLAGS.
* testsuite/ld-auto-import/auto-import.exp: Likewise.
* testsuite/ld-cygwin/exe-export.exp: Likewise.
* testsuite/ld-elf/dwarf.exp: Likewise.
* testsuite/ld-elf/indirect.exp: Likewise.
* testsuite/ld-elf/shared.exp: Likewise.
* testsuite/ld-elfcomm/elfcomm.exp: Likewise.
* testsuite/ld-elfvers/vers.exp: Likewise.
* testsuite/ld-elfvsb/elfvsb.exp: Likewise.
* testsuite/ld-elfweak/elfweak.exp: Likewise.
* testsuite/ld-gc/gc.exp: Likewise.
* testsuite/ld-ifunc/ifunc.exp: Likewise.
* testsuite/ld-mn10300/mn10300.exp: Likewise.
* testsuite/ld-pe/pe-compile.exp: Likewise.
* testsuite/ld-pe/pe-run.exp: Likewise.
* testsuite/ld-pe/pe-run2.exp: Likewise.
* testsuite/ld-pie/pie.exp: Likewise.
* testsuite/ld-plugin/lto.exp: Likewise.
* testsuite/ld-plugin/plugin.exp: Likewise.
* testsuite/ld-scripts/crossref.exp: Likewise.
* testsuite/ld-selective/selective.exp: Likewise.
* testsuite/ld-sh/sh.exp: Likewise.
* testsuite/ld-shared/shared.exp: Likewise.
* testsuite/ld-srec/srec.exp: Likewise.
* testsuite/ld-undefined/undefined.exp: Likewise.
* testsuite/ld-unique/unique.exp: Likewise.
* testsuite/ld-x86-64/tls.exp: Likewise.
* testsuite/lib/ld-lib.exp: Likewise.
libctf/
* Makefile.am (check-DEJAGNU): Don't set CC to CC_FOR_TARGET.
Pass CC and CC_FOR_TARGET. Don't set CC_FOR_HOST.
* Makefile.in: Regenerate.
* testsuite/config/default.exp: Update default CC and similar.
* testsuite/lib/ctf-lib.exp (run_native_host_cmd): Use CC rather
than CC_FOR_HOST.
(run_lookup_test): Use CC_FOR_TARGET and CFLAGS_FOR_TARGET.
--enable-maintainer-mode showed a number of files needing to be
regenerated, and in the case of ld/Makefile.in that the file was
regenerated by hand. Nothing to see here really.
ld/
* Makefile.am (ALL_64_EMULATION_SOURCES): Sort haiku entry.
* Makefile.in: Regenerate.
* po/BLD-POTFILES.in: Regenerate.
libctf/
* configure: Regenerate.
zlib/
* configure: Regenerate.
Use the pattern from other projects where we generate the html pages
in a dir named the same as the project. So now we have:
gas/doc/gas.html - single html page
gas/doc/gas/ - multiple html pages
This works for projects that have a doc/ subdir already, but gprof &
ld require a little tweaking since they generate their docs in their
respective toplevels.
This better matches other GNU projects like autoconf/automake where
the html manual is the single page form. We'll support the multi-page
form in a follow up change.
Attempting to build --enable-targets=all on a 32-bit host results in a
number of errors like the following.
eelf32lriscv.o: in function `gldelf32lriscv_after_allocation':
eelf32lriscv.c:98: undefined reference to `bfd_elf32_riscv_restart_relax_sections'
That's due to needing --enable-64-bit-bfd to get the riscv BFD support
built.
* Makefile.am (ALL_EMULATION_SOURCES): Move riscv files to..
(ALL_64_EMULATION_SOURCES): ..here.
* Makefile.in: Regenerate.
These tests fail since 1c9c9b9b55, due to not being able to access
some scripts:
FAIL: Absolute non-overflowing relocs
FAIL: ld-i386/iamcu-1
FAIL: ld-i386/iamcu-2
The problem is that when built with --enable-shared the ld-new
executable sits in a .libs/ directory.
* Makefile.am (check-DEJAGNU): Set up ldscripts link in .libs.
* Makefile.in: Regenerate.
commit f478212851 did the regen by hand, missed a change in
ld/configure and didn't update line numbers. Fix that, and an old
regen of ld/Makefile.in with the wrong automake.
bfd/
* configure: Regenerate.
binutils/
* configure: Regenerate.
gas/
* configure: Regenerate.
gprof/
* configure: Regenerate.
ld/
* Makefile.in: Regenerate.
* configure: Regenerate.
libctf/
* configure: Regenerate.
opcodes/
* configure: Regenerate.
zlib/
* configure: Regenerate.
RISC-V instruction/code is always little endian, but data might be
big-endian. Therefore, we can not use the original bfd_get/bfd_put
to get/put the code for big endian targets. Add new riscv_get_insn
and riscv_put_insn to always get/put code as little endian can resolve
the problem. Just remember to update them once we have supported
the 48-bit/128-bit instructions in the future patches.
bfd/
* config.bfd: Added targets riscv64be*-*-*, riscv32be*-*-* and
riscvbe*-*-*. Also added riscv_elf[32|64]_be_vec.
* configure.ac: Handle riscv_elf[32|64]_be_vec.
* configure: Regenerate.
* elfnn-riscv.c: Include <limits.h> and define CHAR_BIT for
riscv_is_insn_reloc.
(riscv_get_insn): RISC-V instructions are always little endian, but
bfd_get may be used for big-endian, so add new riscv_get_insn to handle
the insturctions.
(riscv_put_insn): Likewsie.
(riscv_is_insn_reloc): Check if we are relocaing an instruction.
(perform_relocation): Call riscv_is_insn_reloc to decide if we should
use riscv_[get|put]_insn or bfd_[get|put].
(riscv_zero_pcrel_hi_reloc): Use riscv_[get|put]_insn, bfd_[get|put]l32
or bfd_[get|put]l16 for code.
(riscv_elf_relocate_section): Likewise.
(riscv_elf_finish_dynamic_symbol): Likewise.
(riscv_elf_finish_dynamic_sections): Likewise.
(_bfd_riscv_relax_call): Likewise.
(_bfd_riscv_relax_lui): Likewise.
(_bfd_riscv_relax_align): Likewise.
(_bfd_riscv_relax_pc): Likewise.
(riscv_elf_object_p): Handled for big endian.
(TARGET_BIG_SYM, TARGET_BIG_NAME): Defined.
* targets.c: Add riscv_elf[32|64]_be_vec.
(_bfd_target_vector): Likewise.
gas/
* config/tc-riscv.c (riscv_target_format): Add elf64-bigriscv and
elf32-bigriscv.
(install_insn): Always write instructions as little endian.
(riscv_make_nops): Likewise.
(md_convert_frag_branch): Likewise.
(md_number_to_chars): Write data in target endianness.
(options, md_longopts): Add -mbig-endian and -mlittle-endian options.
(md_parse_option): Handle the endian options.
* config/tc-riscv.h: Only define TARGET_BYTES_BIG_ENDIAN if not
already defined.
* configure.tgt: Added riscv64be*, riscv32be*, riscvbe*.
ld/
* configure.tgt: Added riscvbe-*-*, riscv32be*-*-*, riscv64be*-*-*,
riscv32be*-*-linux*, and riscv64be*-*-linux*.
* Makefile.am: Added eelf32briscv.c, eelf32briscv_ilp32f.c and
eelf32briscv_ilp32.c.
* Makefile.in: Regenerate.
* emulparams/elf32briscv.sh: Added.
* emulparams/elf32briscv_ilp32.sh: Likewise.
* emulparams/elf32briscv_ilp32f.sh: Likewise.
* emulparams/elf64briscv.sh: Likewise.
* emulparams/elf64briscv_lp64.sh: Likewise.
* emulparams/elf64briscv_lp64f.sh: Likewise.
Build only unversioned libdep and remove the installed libdep.la since
only a single libdep.so is needed.
PR ld/27082
* Makefile.am
(libdep_la_LDFLAGS): Add -module -avoid-version.
(libdep_la_LINK): New.
(install-data-local): Depend on $(install-bfdpluginLTLIBRARIES)
and remove libdep.la.
* libdep_plugin.c: New file: Processes archives that contain a
special library dependencies element.
* Makefile.am: Add build rules for libdep_plugin.
* Makefile.in: Regenerate.
* NEWS: Mention the new plugin.
* ld.texi: Document the new plugin.
GDB currently doesn't build on 32-bit Solaris:
* On Solaris 11.4/x86:
In file included from /usr/include/sys/procfs.h:26,
from /vol/src/gnu/gdb/hg/master/dist/gdb/i386-sol2-nat.c:24:
/usr/include/sys/old_procfs.h:31:2: error: #error "Cannot use procfs in the large file compilation environment"
#error "Cannot use procfs in the large file compilation environment"
^~~~~
* On Solaris 11.3/x86 there are several more instances of this.
The interaction between procfs and large-file support historically has
been a royal mess on Solaris:
* There are two versions of the procfs interface:
** The old ioctl-based /proc, deprecated and not used any longer in
either gdb or binutils.
** The `new' (introduced in Solaris 2.6, 1997) structured /proc.
* There are two headers one can possibly include:
** <procfs.h> which only provides the structured /proc, definining
_STRUCTURED_PROC=1 and then including ...
** <sys/procfs.h> which defaults to _STRUCTURED_PROC=0, the ioctl-based
/proc, but provides structured /proc if _STRUCTURED_PROC == 1.
* procfs and the large-file environment didn't go well together:
** Until Solaris 11.3, <sys/procfs.h> would always #error in 32-bit
compilations when the large-file environment was active
(_FILE_OFFSET_BITS == 64).
** In both Solaris 11.4 and Illumos, this restriction was lifted for
structured /proc.
So one has to be careful always to define _STRUCTURED_PROC=1 when
testing for or using <sys/procfs.h> on Solaris. As the errors above
show, this isn't always the case in binutils-gdb right now.
Also one may need to disable large-file support for 32-bit compilations
on Solaris. config/largefile.m4 meant to do this by wrapping the
AC_SYS_LARGEFILE autoconf macro with appropriate checks, yielding
ACX_LARGEFILE. Unfortunately the macro doesn't always succeed because
it neglects the _STRUCTURED_PROC part.
To make things even worse, since GCC 9 g++ predefines
_FILE_OFFSET_BITS=64 on Solaris. So even if largefile.m4 deciced not to
enable large-file support, this has no effect, breaking the gdb build.
This patch addresses all this as follows:
* All tests for the <sys/procfs.h> header are made with
_STRUCTURED_PROC=1, the definition going into the various config.h
files instead of having to make them (and sometimes failing) in the
affected sources.
* To cope with the g++ predefine of _FILE_OFFSET_BITS=64,
-U_FILE_OFFSET_BITS is added to various *_CPPFLAGS variables. It had
been far easier to have just
#undef _FILE_OFFSET_BITS
in config.h, but unfortunately such a construct in config.in is
commented by config.status irrespective of indentation and whitespace
if large-file support is disabled. I found no way around this and
putting the #undef in several global headers for bfd, binutils, ld,
and gdb seemed way more invasive.
* Last, the applicability check in largefile.m4 was modified only to
disable largefile support if really needed. To do so, it checks if
<sys/procfs.h> compiles with _FILE_OFFSET_BITS=64 defined. If it
doesn't, the disabling only happens if gdb exists in-tree and isn't
disabled, otherwise (building binutils from a tarball), there's no
conflict.
What initially confused me was the check for $plugins here, which
originally caused the disabling not to take place. Since AC_PLUGINGS
does enable plugin support if <dlfcn.h> exists (which it does on
Solaris), the disabling never happened.
I could find no explanation why the linker plugin needs large-file
support but thought it would be enough if gld and GCC's lto-plugin
agreed on the _FILE_OFFSET_BITS value. Unfortunately, that's not
enough: lto-plugin uses the simple-object interface from libiberty,
which includes off_t arguments. So to fully disable large-file
support would mean also disabling it in libiberty and its users: gcc
and libstdc++-v3. This seems highly undesirable, so I decided to
disable the linker plugin instead if large-file support won't work.
The patch allows binutils+gdb to build on i386-pc-solaris2.11 (both
Solaris 11.3 and 11.4, using GCC 9.3.0 which is the worst case due to
predefined _FILE_OFFSET_BITS=64). Also regtested on
amd64-pc-solaris2.11 (again on Solaris 11.3 and 11.4),
x86_64-pc-linux-gnu and i686-pc-linux-gnu.
config:
* largefile.m4 (ACX_LARGEFILE) <sparc-*-solaris*|i?86-*-solaris*>:
Check for <sys/procfs.h> incompatilibity with large-file support
on Solaris.
Only disable large-file support and perhaps plugins if needed.
Set, substitute LARGEFILE_CPPFLAGS if so.
bfd:
* bfd.m4 (BFD_SYS_PROCFS_H): New macro.
(BFD_HAVE_SYS_PROCFS_TYPE): Require BFD_SYS_PROCFS_H.
Don't define _STRUCTURED_PROC.
(BFD_HAVE_SYS_PROCFS_TYPE_MEMBER): Likewise.
* elf.c [HAVE_SYS_PROCFS_H] (_STRUCTURED_PROC): Don't define.
* configure.ac: Use BFD_SYS_PROCFS_H to check for <sys/procfs.h>.
* configure, config.in: Regenerate.
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* Makefile.in, doc/Makefile.in: Regenerate.
binutils:
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* Makefile.in, doc/Makefile.in: Regenerate.
* configure: Regenerate.
gas:
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* Makefile.in, doc/Makefile.in: Regenerate.
* configure: Regenerate.
gdb:
* proc-api.c (_STRUCTURED_PROC): Don't define.
* proc-events.c: Likewise.
* proc-flags.c: Likewise.
* proc-why.c: Likewise.
* procfs.c: Likewise.
* Makefile.in (INTERNAL_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* configure, config.in: Regenerate.
gdbserver:
* configure, config.in: Regenerate.
gdbsupport:
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* common.m4 (GDB_AC_COMMON): Use BFD_SYS_PROCFS_H to check for
<sys/procfs.h>.
* Makefile.in: Regenerate.
* configure, config.in: Regenerate.
gnulib:
* configure.ac: Run ACX_LARGEFILE before gl_EARLY.
* configure: Regenerate.
gprof:
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* Makefile.in: Regenerate.
* configure: Regenerate.
ld:
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* Makefile.in: Regenerate.
* configure: Regenerate.
The CTF testsuite runs GCC to generate CTF that it knows matches the
input .c files before doing a run_dump_test over it. So we need a GCC
capable of doing that, and we need to always avoid running those tests
if libctf was disabled because the linker will never be capable of it.
ld/
* configure.ac (enable_libctf): Substitute it.
* Makefile.am (enablings.exp): New.
(EXTRA_DEJAGNU_SITE_CONFIG): Add it.
(DISTCLEANFILES): Likewise.
* Makefile.in: Regenerate.
* configure: Likewise.
* testsuite/lib/ld-lib.exp (compile_one_cc): New.
(check_ctf_available): Likewise.
(skip_ctf_tests): Likewise.
* testsuite/ld-ctf/ctf.exp: Call skip_ctf_tests.
This unfortunately means conditionalizing out all the libctf code, but
the result is not too unbearably ugly, if a bit repetitive. I have
stubbed out code in the !ENABLE_LIBCTF path to avoid extra redundant
ifdefs where it seems that might be helpful. (The stubs are not too
disruptive, but I've tried to keep them on one line where possible to
avoid filling up the screen with stubs that nobody would care about.
If this is too much of a coding style violation I can change it.)
Changes since v2: use GCC_ENABLE rather than repeating all the
AC_ARG_ENABLE stuff over and over again.
ld/
* configure.ac [--enable-libctf]: New, default yes.
Set ENABLE_LIBCTF accordingly.
* Makefile.am [!ENABLE_LIBCTF]: Empty LIBCTF.
* configure: Regenerate.
* config.in: Regenerate.
* Makefile.in: Regenerate.
* aclocal.m4: Regenerate.
* ldlang.c (ctf_output): Conditionalize on ENABLE_LIBCTF.
(ldlang_open_ctf): Likewise.
(lang_merge_ctf): Likewise.
(ldlang_ctf_apply_strsym): Likewise.
(lang_write_ctf): Likewise.
(ldlang_write_ctf_late): Likewise.
(ldlang_open_ctf) [!ENABLE_LIBCTF]: Warn about the presence of CTF
sections.
(lang_merge_ctf) [!ENABLE_LIBCTF]: New stub.
(ldlang_ctf_apply_strsym) [!ENABLE_LIBCTF]: Likewise.
(lang_write_ctf) [!ENABLE_LIBCTF]: Likewise.
(ldlang_write_ctf_late) [!ENABLE_LIBCTF]: Likewise.
* ldelfgen.c (ldelf_emit_ctf_early): Conditionalize on
ENABLE_LIBCTF.
(struct ctf_strsym_iter_cb_arg): Likewise.
(ldelf_ctf_strtab_iter_cb): Likewise.
(ldelf_ctf_symbols_iter_cb): Likewise.
(ldelf_examine_strtab_for_ctf): Likewise.
(ldelf_emit_ctf_early) [!ENABLE_LIBCTF]: New stub.
(ldelf_examine_strtab_for_ctf) [!ENABLE_LIBCTF]: New stub.
binutils/
* configure.ac [--enable-libctf]: New, default yes.
Set ENABLE_LIBCTF accordingly.
* Makefile.am [!ENABLE_LIBCTF]: Empty LIBCTF and LIBCTF_NOBFD.
* configure: Regenerate.
* config.in: Regenerate.
* Makefile.in: Regenerate.
* aclocal.m4: Regenerate.
* objdump.c (usage): Conditionalize portions on ENABLE_LIBCTF.
(option_values): Likewise.
(long_options): Likewise.
(main): Likewise.
(dump_ctf_indent_lines): Conditionalize out when !ENABLE_LIBCTF.
(make_ctfsect): Likewise.
(dump_ctf_archive_member): Likewise.
(dump_ctf) [ENABLE_LIBCTF]: Likewise.
(dump_ctf) [!ENABLE_LIBCTF]: New empty stub.
* readelf.c (options): Conditionalize portions on ENABLE_LIBCTF.
(usage): Likewise.
(process_section_contents): Likewise.
(shdr_to_ctf_sect): Conditionalize out when !ENABLE_LIBCTF.
(dump_ctf_indent_lines): Likewise.
(dump_section_as_ctf) [ENABLE_LIBCTF]: Likewise.
