The addressable signed 32-bit range for n64 MIPS `.got.plt' references
is from 0xffffffff7fff8000 to 0x7fff7fff, due to how the composition of
an LUI and an LD instruction works for address calculation in the 64-bit
addressing mode, such as when CP0.Status.UX=1.
We currently have a range check in `mips_finish_exec_plt', however it is
not correct as it verifies that the `.got.plt' start address referred is
between 0xffffffff80000000 and 0x7fffffff. It is also implemented as an
assertion rather than a proper error message despite that the situation
can be triggered by user input. Additionally there is no check made for
individual `.got.plt' entries referred even though they can be out of
range while the `.got.plt' start address is not.
Fix all these problems and use the correct range for the check, limiting
it to n64 output files, and then issue a proper error message both in
`mips_finish_exec_plt' and in `_bfd_mips_elf_finish_dynamic_symbol',
suggesting the use of the `-Ttext-segment=...' option that will often
work and with the default linker scripts in particular. Add suitable
tests covering boundary cases.
bfd/
PR ld/22966
* elfxx-mips.c (_bfd_mips_elf_finish_dynamic_symbol): Verify the
`.got.plt' entry referred is in range.
(mips_finish_exec_plt): Correct the range check for `.got.plt'
start. Replace the assertion used for that with a proper error
message.
ld/
PR ld/22966
* testsuite/ld-mips-elf/n64-plt-1.dd: New test.
* testsuite/ld-mips-elf/n64-plt-1.gd: New test.
* testsuite/ld-mips-elf/n64-plt-2.ed: New test.
* testsuite/ld-mips-elf/n64-plt-3.ed: New test.
* testsuite/ld-mips-elf/n64-plt-4.dd: New test.
* testsuite/ld-mips-elf/n64-plt-4.gd: New test.
* testsuite/ld-mips-elf/n64-plt-1.ld: New test linker script.
* testsuite/ld-mips-elf/n64-plt-2.ld: New test linker script.
* testsuite/ld-mips-elf/n64-plt-3.ld: New test linker script.
* testsuite/ld-mips-elf/n64-plt-4.ld: New test linker script.
* testsuite/ld-mips-elf/n64-plt.s: New test source.
* testsuite/ld-mips-elf/n64-plt-lib.s: New test source.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
Remove:
FAIL: DT_TEXTREL map file warning
introduced with commit 63c1f59d66 ("readonly_dynrelocs"), coming from
the lack of a "dynamic relocation against `foo' in read-only section
`.rodata'" warning message produced.
The cause of the failure is that for sections which have dynamic
relocations attached the MIPS backend sets SHF_WRITE, in
`mips_elf_create_dynamic_relocation', yielding:
$ readelf -S textrel.so | grep rodata
[ 8] .rodata PROGBITS 00000254 000254 000004 00 WA 0 0 1
$
so the section is read/write and therefore there is nothing to warn
about.
This arrangement came from commit 7403cb6305 ("PATCH for N32 ABI"),
<https://sourceware.org/ml/binutils/1999-q2/msg00375.html>, i.e. for all
practical purposes it has been there since forever, and therefore it can
be considered a part of the ABI and the test case irrelevant for MIPS
targets.
We don't have a clean way to request UNSUPPORTED result, which would be
the most appropriate here, so just XFAIL the test instead.
ld/
* testsuite/ld-elf/shared.exp: XFAIL DT_TEXTREL map file warning
test for `mips*-*-*'.
When trying to run the update-gnulib.sh script in gdb, I get this:
Error: Wrong automake version (Unescaped left brace in regex is deprecated, passed through in regex; marked by <-- HERE in m/\${ <-- HERE ([^ =:+{}]+)}/ at /opt/automake/1.11.1/bin/automake line 4113.), we need 1.11.1.
Aborting.
Apparently, it's an issue with a regex in automake that triggers a
warning starting with Perl 5.22. It has been fixed in automake 1.15.1.
So I think it's a good excuse to bump the versions of autoconf and
automake used in the gnulib import. And to avoid requiring multiple
builds of autoconf/automake, it was suggested that we bump the required
version of those tools for all binutils-gdb.
For autoconf, the 2.69 version is universally available, so it's an easy
choice. For automake, different distros and distro versions have
different automake versions. But 1.15.1 seems to be the most readily
available as a package. In any case, it's easy to build it from source.
I removed the version checks from AUTOMAKE_OPTIONS and AC_PREREQ,
because I don't think they are useful in our case. They only specify a
lower bound for the acceptable version of automake/autoconf. That's
useful if you let the user choose the version of the tool they want to
use, but want to set a minimum version (because you use a feature that
was introduced in that version). In our case, we force people to use a
specific version anyway. For the autoconf version, we have the check in
config/override.m4 that enforces the version we want. It will be one
less thing to update next time we change autotools version.
I hit a few categories of problems that required some changes. They are
described below along with the chosen solutions.
Problem 1:
configure.ac:17: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see:
configure.ac:17: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation
Solution 1:
Adjust the code based on the example at that URL.
Problem 2 (in zlib/):
Makefile.am: error: required file './INSTALL' not found
Makefile.am: 'automake --add-missing' can install 'INSTALL'
Makefile.am: error: required file './NEWS' not found
Makefile.am: error: required file './AUTHORS' not found
Makefile.am: error: required file './COPYING' not found
Makefile.am: 'automake --add-missing' can install 'COPYING'
Solution 2:
Add the foreign option to AUTOMAKE_OPTIONS.
Problem 3:
doc/Makefile.am:20: error: support for Cygnus-style trees has been removed
Solution 3:
Remove the cygnus options.
Problem 4:
Makefile.am:656: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS')
Solution 4:
Rename "INCLUDES = " to "AM_CPPFLAGS += " (because AM_CPPFLAGS is
already defined earlier).
Problem 5:
doc/Makefile.am:71: warning: suffix '.texinfo' for Texinfo files is discouraged; use '.texi' instead
doc/Makefile.am: warning: Oops!
doc/Makefile.am: It appears this file (or files included by it) are triggering
doc/Makefile.am: an undocumented, soon-to-be-removed automake hack.
doc/Makefile.am: Future automake versions will no longer place in the builddir
doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that
doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or
doc/Makefile.am: DISTCLEANFILES.
doc/Makefile.am: If you want your '.info' files to be placed in the builddir
doc/Makefile.am: rather than in the srcdir, you have to use the shiny new
doc/Makefile.am: 'info-in-builddir' automake option.
Solution 5:
Rename .texinfo files to .texi.
Problem 6:
doc/Makefile.am: warning: Oops!
doc/Makefile.am: It appears this file (or files included by it) are triggering
doc/Makefile.am: an undocumented, soon-to-be-removed automake hack.
doc/Makefile.am: Future automake versions will no longer place in the builddir
doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that
doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or
doc/Makefile.am: DISTCLEANFILES.
doc/Makefile.am: If you want your '.info' files to be placed in the builddir
doc/Makefile.am: rather than in the srcdir, you have to use the shiny new
doc/Makefile.am: 'info-in-builddir' automake option.
Solution 6:
Remove the hack at the bottom of doc/Makefile.am and use
the info-in-builddir automake option.
Problem 7:
doc/Makefile.am:35: error: required file '../texinfo.tex' not found
doc/Makefile.am:35: 'automake --add-missing' can install 'texinfo.tex'
Solution 7:
Use the no-texinfo.tex automake option. We also have one in
texinfo/texinfo.tex, not sure if we should point to that, or move it
(or a newer version of it added with automake --add-missing) to
top-level.
Problem 8:
Makefile.am:131: warning: source file 'config/tc-aarch64.c' is in a subdirectory,
Makefile.am:131: but option 'subdir-objects' is disabled
automake: warning: possible forward-incompatibility.
automake: At least a source file is in a subdirectory, but the 'subdir-objects'
automake: automake option hasn't been enabled. For now, the corresponding output
automake: object file(s) will be placed in the top-level directory. However,
automake: this behaviour will change in future Automake versions: they will
automake: unconditionally cause object files to be placed in the same subdirectory
automake: of the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
Solution 8:
Use subdir-objects, that means adjusting references to some .o that will now
be in config/.
Problem 9:
configure.ac:375: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body
../../lib/autoconf/lang.m4:193: AC_LANG_CONFTEST is expanded from...
../../lib/autoconf/general.m4:2601: _AC_COMPILE_IFELSE is expanded from...
../../lib/autoconf/general.m4:2617: AC_COMPILE_IFELSE is expanded from...
../../lib/m4sugar/m4sh.m4:639: AS_IF is expanded from...
../../lib/autoconf/general.m4:2042: AC_CACHE_VAL is expanded from...
../../lib/autoconf/general.m4:2063: AC_CACHE_CHECK is expanded from...
configure.ac:375: the top level
Solution 9:
Use AC_LANG_SOURCE, or use proper quoting.
Problem 10 (in intl/):
configure.ac:7: warning: AC_COMPILE_IFELSE was called before AC_USE_SYSTEM_EXTENSIONS
/usr/share/aclocal/threadlib.m4:36: gl_THREADLIB_EARLY_BODY is expanded from...
/usr/share/aclocal/threadlib.m4:29: gl_THREADLIB_EARLY is expanded from...
/usr/share/aclocal/threadlib.m4:318: gl_THREADLIB is expanded from...
/usr/share/aclocal/lock.m4:9: gl_LOCK is expanded from...
/usr/share/aclocal/intl.m4:211: gt_INTL_SUBDIR_CORE is expanded from...
/usr/share/aclocal/intl.m4:25: AM_INTL_SUBDIR is expanded from...
/usr/share/aclocal/gettext.m4:57: AM_GNU_GETTEXT is expanded from...
configure.ac:7: the top level
Solution 10:
Add AC_USE_SYSTEM_EXTENSIONS in configure.ac.
ChangeLog:
* libtool.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE.
* README-maintainer-mode: Update version requirements.
* ar-lib: New file.
* test-driver: New file.
* configure: Re-generate.
bfd/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11.
(INCLUDES): Rename to ...
(AM_CPPFLAGS): ... this.
* configure.ac: Remove AC_PREREQ.
* doc/Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9, cygnus, add
info-in-builddir no-texinfo.tex.
(info_TEXINFOS): Rename bfd.texinfo to bfd.texi.
* doc/bfd.texinfo: Rename to ...
* doc/bfd.texi: ... this.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
binutils/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* doc/Makefile.am (AUTOMAKE_OPTIONS): Remove cygnus, add
info-in-builddir no-texinfo.tex.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
config/ChangeLog:
* override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69.
etc/ChangeLog:
* configure.in: Remove AC_PREREQ.
* configure: Re-generate.
gas/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11, add subdir-objects.
(TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O): Add config/ prefix.
* configure.ac (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O, emfiles,
extra_objects): Add config/ prefix.
* doc/as.texinfo: Rename to...
* doc/as.texi: ... this.
* doc/Makefile.am: Rename as.texinfo to as.texi throughout.
Remove DISTCLEANFILES hack.
(AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add no-texinfo.tex and
info-in-builddir.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
gdb/ChangeLog:
* common/common-defs.h (PACKAGE_NAME, PACKAGE_VERSION,
PACKAGE_STRING, PACKAGE_TARNAME): Undefine.
* configure.ac: Remove AC_PREREQ, add missing quoting.
* gnulib/configure.ac: Modernize usage of
AC_INIT/AM_INIT_AUTOMAKE. Remove AC_PREREQ.
* gnulib/update-gnulib.sh (AUTOCONF_VERSION): Bump to 2.69.
(AUTOMAKE_VERSION): Bump to 1.15.1.
* configure: Re-generate.
* config.in: Re-generate.
* aclocal.m4: Re-generate.
* gnulib/aclocal.m4: Re-generate.
* gnulib/config.in: Re-generate.
* gnulib/configure: Re-generate.
* gnulib/import/Makefile.in: Re-generate.
gdb/gdbserver/ChangeLog:
* configure.ac: Remove AC_PREREQ, add missing quoting.
* configure: Re-generate.
* config.in: Re-generate.
* aclocal.m4: Re-generate.
gdb/testsuite/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
gold/ChangeLog:
* configure.ac: Remove AC_PREREQ, add missing quoting and usage
of AC_LANG_SOURCE.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
* testsuite/Makefile.in: Re-generate.
gprof/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* Makefile.am: Remove DISTCLEANFILES hack.
(AUTOMAKE_OPTIONS): Remove 1.11, add info-in-builddir.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
* gconfig.in: Re-generate.
intl/ChangeLog:
* configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ.
* configure: Re-generate.
* config.h.in: Re-generate.
* aclocal.m4: Re-generate.
ld/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* Makefile.am: Remove DISTCLEANFILES hack, rename ld.texinfo to
ld.texi, ldint.texinfo to ldint.texi throughout.
(AUTOMAKE_OPTIONS): Add info-in-builddir.
* README: Rename ld.texinfo to ld.texi, ldint.texinfo to
ldint.texi throughout.
* gen-doc.texi: Likewise.
* h8-doc.texi: Likewise.
* ld.texinfo: Rename to ...
* ld.texi: ... this.
* ldint.texinfo: Rename to ...
* ldint.texi: ... this.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
libdecnumber/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* aclocal.m4.
libiberty/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* config.in: Re-generate.
opcodes/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11.
* configure.ac: Remove AC_PREREQ.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
readline/ChangeLog.gdb:
* configure: Re-generate.
* examples/rlfe/configure: Re-generate.
sim/ChangeLog:
* All configure.ac: Remove AC_PREREQ.
* All configure: Re-generate.
zlib/ChangeLog.bin-gdb:
* configure.ac: Modernize AC_INIT call, remove AC_PREREQ.
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add
foreign.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
Plus a number of fixes to the pr23169 tests.
* testsuite/lib/ld-lib.exp (check_ifunc_available): Pass without
running executable when non-native.
(check_ifunc_attribute_available): Likewise.
* testsuite/ld-ifunc/pr23169a.rd: Remove extraneous lines. Match
st_other strings. Pass when func is an ifunc.
* testsuite/ld-ifunc/pr23169b.rd: Remove extraneous lines. Correct
reloc regexp. Correct match-anything line.
* testsuite/ld-ifunc/pr23169c.rd: Remove extraneous lines. Match
st_other strings.
Many ELF targets arrange to emit a number of section symbols in
.dynsym for use by dynamic relocations. This happens before the
dynamic relocations are output, and the need for those symbols
determined. In most cases they are not needed. A proper analysis of
the need for dynamic section symbols is target specific and tedious,
so this patch just excludes them in the obvious case when no
dynamic relocations are present.
The patch also runs the new pr23161 and pr23162 tests on more targets.
bfd/
* elf-bfd.h (struct elf_link_hash_table): Add "dynamic_relocs".
* elflink.c (_bfd_elf_init_2_index_sections): Comment fix.
(_bfd_elf_add_dynamic_entry): Set "dynamic_relocs".
(_bfd_elf_link_renumber_dynsyms): Exclude all section symbols when
"dynamic_relocs" is not set.
* elfxx-mips.c (count_section_dynsyms): Likewise.
ld/
* testsuite/ld-elf/readelf.exp: Delete DUMP and selection of
variant ver_def.vd.
* testsuite/ld-elf/ver_def-tic6x.vd: Delete.
* testsuite/ld-elf/shared.exp: Run most pr23161 and pr23162 tests for
linux, nacl and gnu targets.
* testsuite/ld-mips-elf/mips-elf.exp: Set base_syms to 1.
* testsuite/ld-elf/pr23161a.rd: Don't check reloc type. Allow any
order of __bss_start, _edata and _end.
* testsuite/ld-elf/pr23161b.rd: Don't check plt and dyn relocs.
Allow and order of __bss_start, _edata and _end.
* testsuite/ld-elf/pr23162.rd: Fail if __bss_start, _edata or _end
relocs are present rather than testing for no relocations.
* testsuite/ld-aarch64/gc-plt-relocs.d,
* testsuite/ld-aarch64/ifunc-1-local.d,
* testsuite/ld-aarch64/ifunc-1.d,
* testsuite/ld-aarch64/ifunc-2-local.d,
* testsuite/ld-aarch64/ifunc-2.d,
* testsuite/ld-aarch64/ifunc-21.d,
* testsuite/ld-aarch64/ifunc-3a.d,
* testsuite/ld-arm/farcall-mixed-lib-v4t.d,
* testsuite/ld-arm/farcall-mixed-lib.d,
* testsuite/ld-arm/gc-hidden-1.d,
* testsuite/ld-arm/tls-gdesc-got.d,
* testsuite/ld-arm/tls-lib-loc.d,
* testsuite/ld-arm/tls-longplt-lib.d,
* testsuite/ld-arm/tls-thumb1.d,
* testsuite/ld-cris/libdso-10.d,
* testsuite/ld-cris/libdso-11.d,
* testsuite/ld-cris/libdso-13b.d,
* testsuite/ld-cris/libdso-14.d,
* testsuite/ld-cris/libdso-15.d,
* testsuite/ld-cris/pic-gc-72.d,
* testsuite/ld-cris/pic-gc-73.d,
* testsuite/ld-cris/tls-gc-71.d,
* testsuite/ld-mips-elf/mips16-pic-4a.nd,
* testsuite/ld-mips-elf/pic-and-nonpic-3a.dd,
* testsuite/ld-mips-elf/pie-n32.d,
* testsuite/ld-mips-elf/pie-n64.d,
* testsuite/ld-mips-elf/pie-o32.d: Update for removed dynamic
section symbols.
See email thread starting here for more details:
https://sourceware.org/ml/binutils/2018-06/msg00036.html
PR 22983
* testsuite/ld-plugin/lto.exp: Use individual tests to check for
the presence of each expected symbol.
* testsuite/ld-plugin/pr22983.1.d: New file.
* testsuite/ld-plugin/pr22983.2.d: New file.
* testsuite/ld-plugin/pr22983.3.d: New file.
* testsuite/ld-plugin/pr22983.4.d: New file.
Adapt the existing regular MIPS lazy binding stub tests for microMIPS
code verification. Check both regular and `--insn32' variants.
Correct indentation issues in the conditional updated.
ld/
* testsuite/ld-mips-elf/stub-dynsym-micromips-1-7fff.d: New
test.
* testsuite/ld-mips-elf/stub-dynsym-micromips-1-8000.d: New
test.
* testsuite/ld-mips-elf/stub-dynsym-micromips-1-fff0.d: New
test.
* testsuite/ld-mips-elf/stub-dynsym-micromips-1-10000.d: New
test.
* testsuite/ld-mips-elf/stub-dynsym-micromips-1-2fe80.d: New
test.
* testsuite/ld-mips-elf/stub-dynsym-micromips-insn32-1-7fff.d:
New test.
* testsuite/ld-mips-elf/stub-dynsym-micromips-insn32-1-8000.d:
New test.
* testsuite/ld-mips-elf/stub-dynsym-micromips-insn32-1-fff0.d:
New test.
* testsuite/ld-mips-elf/stub-dynsym-micromips-insn32-1-10000.d:
New test.
* testsuite/ld-mips-elf/stub-dynsym-micromips-insn32-1-2fe80.d:
New test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests. Fix
indentation.
As from commit 2ebd05b80b ("MIPS/LD: Correct `mips-*-windiss' target
emulation configuration") we have:
EXTRA_EM_FILE=mipself
in `emulparams/elf32mipswindiss.sh', however no corresponding Makefile
`mipself.em' dependency for `eelf32mipswindiss.c'. Add it.
ld/
* Makefile.am (eelf32mipswindiss.c): Add `mipself.em' dependency.
* Makefile.in: Regenerate.
There is no need to put hidden _edata, __bss_start, and _end in dynamic
symbol table in shared libraries.
bfd/
PR ld/23161
* elfxx-x86.c (elf_x86_hide_linker_defined): New function.
(_bfd_x86_elf_link_check_relocs): Use it to hide hidden
__bss_start, _end and _edata in shared libraries.
ld/
PR ld/23161
* testsuite/ld-elf/pr23161d.rd: Remove local _edata, __bss_start,
and _end from dynamic symbol table.
EXECUTABLE_SYMBOLS is supposed to be true to its name, only defining
symbols for the executable.
* emulparams/elf64bmip.sh (EXECUTABLE_SYMBOLS): Don't define.
(OTHER_SYMBOLS): Define this instead.
* emulparams/elf32bmipn32.sh (EXECUTABLE_SYMBOLS): Don't define.
(OTHER_SYMBOLS): Define similarly to elf64bmip.sh.
* emulparams/elf64hppa.sh (EXECUTABLE_SYMBOLS): Don't define.
(OTHER_SYMBOLS): Define instead.
Adding an undefined __c6xabi_DSBT_BASE via an EXTERN in the linker
script isn't ideal, as the symbol is not always needed. This patch
adds the undefined symbol on encountering relocations where it is
implicitly referenced.
bfd/
* elf32-tic6x.c (elf32_tic6x_check_relocs): Reference
__c6xabi_DSBT_BASE explicitly for R_C6000_SBR_* relocs.
ld/
* emulparams/elf32_tic6x_le.sh (EXECUTABLE_SYMBOLS): Don't define.
Best practice is to not mix lseek/read with fseek/fread on the same
underlying file descriptor, as not all stdio implementations will cope.
Since the plugin uses lseek/read while bfd uses fseek/fread this patch
reopens the file for exclusive use by the plugin rather than trying to
restore the file descriptor. That allows the plugin to read the file
after plugin_call_claim_file too.
bfd/
PR 23254
* plugin.c (bfd_plugin_open_input): Allow for possibility of
nested archives. Open file again for plugin.
(try_claim): Don't save and restore file position. Close file
if not claimed.
* sysdep.h (O_BINARY): Define.
ld/
PR 23254
* plugin.c (plugin_call_claim_file): Revert 2016-07-19 patch.
(plugin_object_p): Don't dup file descriptor.
Bump version number to 2.30.52 since _bfd_link_hide_symbol has been added
to bfd_target.
bfd/
* version.m4: Bump version to 2.30.52
* configure: Regenerated.
binutils/
* configure: Regenerated.
gas/
* configure: Regenerated.
gprof/
* configure: Regenerated.
ld/
* configure: Regenerated.
opcodes/
* configure: Regenerated.
bfd_hide_sym_by_version can't be used to check if a versioned symbol is
hidden. This patch adds _bfd_elf_link_hide_sym_by_version to support
both versioned and unversioned symbols by extracting versioned symbol
check from _bfd_elf_link_assign_sym_version.
bfd/
PR ld/23194
* elf-bfd.h (_bfd_elf_link_hide_sym_by_version): New.
* elflink.c (_bfd_elf_link_hide_versioned_symbol): New function.
Extracted from _bfd_elf_link_assign_sym_version.
(_bfd_elf_link_hide_sym_by_version): New function.
(_bfd_elf_link_assign_sym_version): Use
_bfd_elf_link_hide_versioned_symbol.
* elfxx-x86.c (_bfd_x86_elf_link_symbol_references_local): Call
_bfd_elf_link_hide_sym_by_version instead of
bfd_hide_sym_by_version. Don't check unversioned symbol.
ld/
PR ld/23194
* testsuite/ld-i386/pr23194.d: Expect only R_386_GLOB_DAT
against foobar.
* testsuite/ld-i386/pr23194.map: Add foobar.
* testsuite/ld-x86-64/pr23194.map: Likewise.
* testsuite/ld-i386/pr23194.s: Add a common foobar symbol.
* testsuite/ld-x86-64/pr23194.s: Likewise.
* testsuite/ld-x86-64/pr23194.d: Expect only R_X86_64_GLOB_DAT
against foobar.
This patch regenerates a number of files that either were edited by
hand or not regenerated when s12z support was added to binutils.
bfd/
* Makefile.in: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
gas/
* po/POTFILES.in: Regenerate.
ld/
* po/BLD-POTFILES.in: Regenerate.
opcodes/
* Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.
bfd_hide_sym_by_version can't be used to check if a versioned symbol is
hidden. It has to be synced with _bfd_elf_link_assign_sym_version to
get the correct answer.
bfd/
PR ld/23194
* elfxx-x86.c (_bfd_x86_elf_link_symbol_references_local): Don't
set eh->local_ref to 1 if a symbol is versioned and there is a
version script.
ld/
PR ld/23194
* testsuite/ld-i386/i386.exp: Run pr23194.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-i386/pr23194.d: New file.
* testsuite/ld-i386/pr23194.map: Likewise.
* testsuite/ld-i386/pr23194.s: Likewise.
* testsuite/ld-x86-64/pr23194.d: Likewise.
* testsuite/ld-x86-64/pr23194.map: Likewise.
* testsuite/ld-x86-64/pr23194.s: Likewise.
Since the pr23189 test isn't Linux specific, run it for all targets.
* testsuite/ld-i386/i386.exp: Run pr23189 for all targets.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
bfd * Makefile.am: Add s12z files.
* Makefile.in: Regenerate.
* archures.c: Add bfd_s12z_arch.
* bfd-in.h: Add exports of bfd_putb24 and bfd_putl24.
* bfd-in2.h: Regenerate.
* config.bfd: Add s12z target.
* configure.ac: Add s12z target.
* configure: Regenerate.
* cpu-s12z.c: New file.
* elf32-s12z.c: New file.
* libbfd.c (bfd_putb24): New function.
(bfd_putl24): New function.
* libbfd.h: Regenerate.
* reloc.c: Add s12z relocations.
(bfd_get_reloc_size): Handle size 5 relocs.
* targets.c: Add s12z_elf32_vec.
opcodes * Makefile.am: Add support for s12z architecture.
* configure.ac: Likewise.
* disassemble.c: Likewise.
* disassemble.h: Likewise.
* Makefile.in: Regenerate.
* configure: Regenerate.
* s12z-dis.c: New file.
* s12z.h: New file.
include * elf/s12z.h: New header.
ld * Makefile.am: Add support for s12z architecture.
* configure.tgt: Likewise.
* Makefile.in: Regenerate.
* emulparams/m9s12zelf.sh: New file.
* scripttempl/elfm9s12z.sc: New file.
* testsuite/ld-discard/static.d: Expect to fail for the s12z
target.
* testsuite/ld-elf/endsym.d: Likewise.
* testsuite/ld-elf/merge.d: Likewise.
* testsuite/ld-elf/pr14926.d: Skip for the s12z target.
* testsuite/ld-elf/sec64k.exp: Likewise.
* testsuite/ld-s12z: New directory.
* testsuite/ld-s12z/opr-linking.d: New file.
* testsuite/ld-s12z/opr-linking.s: New file.
* testsuite/ld-s12z/relative-linking.d: New file.
* testsuite/ld-s12z/relative-linking.s: New file.
* testsuite/ld-s12z/z12s.exp: New file.
gas * Makefile.am: Add support for s12z target.
* Makefile.in: Regenerate.
* NEWS: Mention the new support.
* config/tc-s12z.c: New file.
* config/tc-s12z.h: New file.
* configure.tgt: Add s12z support.
* doc/Makefile.am: Likewise.
* doc/Makefile.in: Regenerate.
* doc/all.texi: Add s12z documentation.
* doc/as.textinfo: Likewise.
* doc/c-s12z.texi: New file.
* testsuite/gas/s12z: New directory.
* testsuite/gas/s12z/abs.d: New file.
* testsuite/gas/s12z/abs.s: New file.
* testsuite/gas/s12z/adc-imm.d: New file.
* testsuite/gas/s12z/adc-imm.s: New file.
* testsuite/gas/s12z/adc-opr.d: New file.
* testsuite/gas/s12z/adc-opr.s: New file.
* testsuite/gas/s12z/add-imm.d: New file.
* testsuite/gas/s12z/add-imm.s: New file.
* testsuite/gas/s12z/add-opr.d: New file.
* testsuite/gas/s12z/add-opr.s: New file.
* testsuite/gas/s12z/and-imm.d: New file.
* testsuite/gas/s12z/and-imm.s: New file.
* testsuite/gas/s12z/and-opr.d: New file.
* testsuite/gas/s12z/and-opr.s: New file.
* testsuite/gas/s12z/and-or-cc.d: New file.
* testsuite/gas/s12z/and-or-cc.s: New file.
* testsuite/gas/s12z/bfext-special.d: New file.
* testsuite/gas/s12z/bfext-special.s: New file.
* testsuite/gas/s12z/bfext.d: New file.
* testsuite/gas/s12z/bfext.s: New file.
* testsuite/gas/s12z/bit-manip.d: New file.
* testsuite/gas/s12z/bit-manip.s: New file.
* testsuite/gas/s12z/bit.d: New file.
* testsuite/gas/s12z/bit.s: New file.
* testsuite/gas/s12z/bra-expression-defined.d: New file.
* testsuite/gas/s12z/bra-expression-defined.s: New file.
* testsuite/gas/s12z/bra-expression-undef.d: New file.
* testsuite/gas/s12z/bra-expression-undef.s: New file.
* testsuite/gas/s12z/bra.d: New file.
* testsuite/gas/s12z/bra.s: New file.
* testsuite/gas/s12z/brclr-symbols.d: New file.
* testsuite/gas/s12z/brclr-symbols.s: New file.
* testsuite/gas/s12z/brset-clr-opr-imm-rel.d: New file.
* testsuite/gas/s12z/brset-clr-opr-imm-rel.s: New file.
* testsuite/gas/s12z/brset-clr-opr-reg-rel.d: New file.
* testsuite/gas/s12z/brset-clr-opr-reg-rel.s: New file.
* testsuite/gas/s12z/brset-clr-reg-imm-rel.d: New file.
* testsuite/gas/s12z/brset-clr-reg-imm-rel.s: New file.
* testsuite/gas/s12z/brset-clr-reg-reg-rel.d: New file.
* testsuite/gas/s12z/brset-clr-reg-reg-rel.s: New file.
* testsuite/gas/s12z/clb.d: New file.
* testsuite/gas/s12z/clb.s: New file.
* testsuite/gas/s12z/clr-opr.d: New file.
* testsuite/gas/s12z/clr-opr.s: New file.
* testsuite/gas/s12z/clr.d: New file.
* testsuite/gas/s12z/clr.s: New file.
* testsuite/gas/s12z/cmp-imm.d: New file.
* testsuite/gas/s12z/cmp-imm.s: New file.
* testsuite/gas/s12z/cmp-opr-inc.d: New file.
* testsuite/gas/s12z/cmp-opr-inc.s: New file.
* testsuite/gas/s12z/cmp-opr-rdirect.d: New file.
* testsuite/gas/s12z/cmp-opr-rdirect.s: New file.
* testsuite/gas/s12z/cmp-opr-reg.d: New file.
* testsuite/gas/s12z/cmp-opr-reg.s: New file.
* testsuite/gas/s12z/cmp-opr-rindirect.d: New file.
* testsuite/gas/s12z/cmp-opr-rindirect.s: New file.
* testsuite/gas/s12z/cmp-opr-sxe4.d: New file.
* testsuite/gas/s12z/cmp-opr-sxe4.s: New file.
* testsuite/gas/s12z/cmp-opr-xys.d: New file.
* testsuite/gas/s12z/cmp-opr-xys.s: New file.
* testsuite/gas/s12z/cmp-s-imm.d: New file.
* testsuite/gas/s12z/cmp-s-imm.s: New file.
* testsuite/gas/s12z/cmp-s-opr.d: New file.
* testsuite/gas/s12z/cmp-s-opr.s: New file.
* testsuite/gas/s12z/cmp-xy.d: New file.
* testsuite/gas/s12z/cmp-xy.s: New file.
* testsuite/gas/s12z/com-opr.d: New file.
* testsuite/gas/s12z/com-opr.s: New file.
* testsuite/gas/s12z/complex-shifts.d: New file.
* testsuite/gas/s12z/complex-shifts.s: New file.
* testsuite/gas/s12z/db-tb-cc-opr.d: New file.
* testsuite/gas/s12z/db-tb-cc-opr.s: New file.
* testsuite/gas/s12z/db-tb-cc-reg.d: New file.
* testsuite/gas/s12z/db-tb-cc-reg.s: New file.
* testsuite/gas/s12z/dbCC.d: New file.
* testsuite/gas/s12z/dbCC.s: New file.
* testsuite/gas/s12z/dec-opr.d: New file.
* testsuite/gas/s12z/dec-opr.s: New file.
* testsuite/gas/s12z/dec.d: New file.
* testsuite/gas/s12z/dec.s: New file.
* testsuite/gas/s12z/div.d: New file.
* testsuite/gas/s12z/div.s: New file.
* testsuite/gas/s12z/eor.d: New file.
* testsuite/gas/s12z/eor.s: New file.
* testsuite/gas/s12z/exg.d: New file.
* testsuite/gas/s12z/exg.s: New file.
* testsuite/gas/s12z/ext24-ld-xy.d: New file.
* testsuite/gas/s12z/ext24-ld-xy.s: New file.
* testsuite/gas/s12z/inc-opr.d: New file.
* testsuite/gas/s12z/inc-opr.s: New file.
* testsuite/gas/s12z/inc.d: New file.
* testsuite/gas/s12z/inc.s: New file.
* testsuite/gas/s12z/inh.d: New file.
* testsuite/gas/s12z/inh.s: New file.
* testsuite/gas/s12z/jmp.d: New file.
* testsuite/gas/s12z/jmp.s: New file.
* testsuite/gas/s12z/jsr.d: New file.
* testsuite/gas/s12z/jsr.s: New file.
* testsuite/gas/s12z/ld-imm-page2.d: New file.
* testsuite/gas/s12z/ld-imm-page2.s: New file.
* testsuite/gas/s12z/ld-imm.d: New file.
* testsuite/gas/s12z/ld-imm.s: New file.
* testsuite/gas/s12z/ld-immu18.d: New file.
* testsuite/gas/s12z/ld-immu18.s: New file.
* testsuite/gas/s12z/ld-large-direct.d: New file.
* testsuite/gas/s12z/ld-large-direct.s: New file.
* testsuite/gas/s12z/ld-opr.d: New file.
* testsuite/gas/s12z/ld-opr.s: New file.
* testsuite/gas/s12z/ld-s-opr.d: New file.
* testsuite/gas/s12z/ld-s-opr.s: New file.
* testsuite/gas/s12z/ld-small-direct.d: New file.
* testsuite/gas/s12z/ld-small-direct.s: New file.
* testsuite/gas/s12z/lea-immu18.d: New file.
* testsuite/gas/s12z/lea-immu18.s: New file.
* testsuite/gas/s12z/lea.d: New file.
* testsuite/gas/s12z/lea.s: New file.
* testsuite/gas/s12z/mac.d: New file.
* testsuite/gas/s12z/mac.s: New file.
* testsuite/gas/s12z/min-max.d: New file.
* testsuite/gas/s12z/min-max.s: New file.
* testsuite/gas/s12z/mod.d: New file.
* testsuite/gas/s12z/mod.s: New file.
* testsuite/gas/s12z/mov.d: New file.
* testsuite/gas/s12z/mov.s: New file.
* testsuite/gas/s12z/mul-imm.d: New file.
* testsuite/gas/s12z/mul-imm.s: New file.
* testsuite/gas/s12z/mul-opr-opr.d: New file.
* testsuite/gas/s12z/mul-opr-opr.s: New file.
* testsuite/gas/s12z/mul-opr.d: New file.
* testsuite/gas/s12z/mul-opr.s: New file.
* testsuite/gas/s12z/mul-reg.d: New file.
* testsuite/gas/s12z/mul-reg.s: New file.
* testsuite/gas/s12z/mul.d: New file.
* testsuite/gas/s12z/mul.s: New file.
* testsuite/gas/s12z/neg-opr.d: New file.
* testsuite/gas/s12z/neg-opr.s: New file.
* testsuite/gas/s12z/not-so-simple-shifts.d: New file.
* testsuite/gas/s12z/not-so-simple-shifts.s: New file.
* testsuite/gas/s12z/opr-18u.d: New file.
* testsuite/gas/s12z/opr-18u.s: New file.
* testsuite/gas/s12z/opr-expr.d: New file.
* testsuite/gas/s12z/opr-expr.s: New file.
* testsuite/gas/s12z/opr-ext-18.d: New file.
* testsuite/gas/s12z/opr-ext-18.s: New file.
* testsuite/gas/s12z/opr-idx-24-reg.d: New file.
* testsuite/gas/s12z/opr-idx-24-reg.s: New file.
* testsuite/gas/s12z/opr-idx3-reg.d: New file.
* testsuite/gas/s12z/opr-idx3-reg.s: New file.
* testsuite/gas/s12z/opr-idx3-xysp-24.d: New file.
* testsuite/gas/s12z/opr-idx3-xysp-24.s: New file.
* testsuite/gas/s12z/opr-indirect-expr.d: New file.
* testsuite/gas/s12z/opr-indirect-expr.s: New file.
* testsuite/gas/s12z/opr-symbol.d: New file.
* testsuite/gas/s12z/opr-symbol.s: New file.
* testsuite/gas/s12z/or-imm.d: New file.
* testsuite/gas/s12z/or-imm.s: New file.
* testsuite/gas/s12z/or-opr.d: New file.
* testsuite/gas/s12z/or-opr.s: New file.
* testsuite/gas/s12z/p2-mul.d: New file.
* testsuite/gas/s12z/p2-mul.s: New file.
* testsuite/gas/s12z/page2-inh.d: New file.
* testsuite/gas/s12z/page2-inh.s: New file.
* testsuite/gas/s12z/psh-pul.d: New file.
* testsuite/gas/s12z/psh-pul.s: New file.
* testsuite/gas/s12z/qmul.d: New file.
* testsuite/gas/s12z/qmul.s: New file.
* testsuite/gas/s12z/rotate.d: New file.
* testsuite/gas/s12z/rotate.s: New file.
* testsuite/gas/s12z/s12z.exp: New file.
* testsuite/gas/s12z/sat.d: New file.
* testsuite/gas/s12z/sat.s: New file.
* testsuite/gas/s12z/sbc-imm.d: New file.
* testsuite/gas/s12z/sbc-imm.s: New file.
* testsuite/gas/s12z/sbc-opr.d: New file.
* testsuite/gas/s12z/sbc-opr.s: New file.
* testsuite/gas/s12z/shift.d: New file.
* testsuite/gas/s12z/shift.s: New file.
* testsuite/gas/s12z/simple-shift.d: New file.
* testsuite/gas/s12z/simple-shift.s: New file.
* testsuite/gas/s12z/single-ops.d: New file.
* testsuite/gas/s12z/single-ops.s: New file.
* testsuite/gas/s12z/specd6.d: New file.
* testsuite/gas/s12z/specd6.s: New file.
* testsuite/gas/s12z/st-large-direct.d: New file.
* testsuite/gas/s12z/st-large-direct.s: New file.
* testsuite/gas/s12z/st-opr.d: New file.
* testsuite/gas/s12z/st-opr.s: New file.
* testsuite/gas/s12z/st-s-opr.d: New file.
* testsuite/gas/s12z/st-s-opr.s: New file.
* testsuite/gas/s12z/st-small-direct.d: New file.
* testsuite/gas/s12z/st-small-direct.s: New file.
* testsuite/gas/s12z/st-xy.d: New file.
* testsuite/gas/s12z/st-xy.s: New file.
* testsuite/gas/s12z/sub-imm.d: New file.
* testsuite/gas/s12z/sub-imm.s: New file.
* testsuite/gas/s12z/sub-opr.d: New file.
* testsuite/gas/s12z/sub-opr.s: New file.
* testsuite/gas/s12z/tfr.d: New file.
* testsuite/gas/s12z/tfr.s: New file.
* testsuite/gas/s12z/trap.d: New file.
* testsuite/gas/s12z/trap.s: New file.
binutils* readelf.c: Add support for s12z architecture.
* testsuite/lib/binutils-common.exp (is_elf_format): Excluse s12z
targets.
Since symbols created by HIDDEN and PROVIDE_HIDDEN assignments in
linker script may be marked as defined, but not hidden, we can't
set eh->local_ref to 1 in _bfd_x86_elf_link_symbol_references_local.
Also R_386_GOT32X should be handled as just like R_386_GOT32 when
relocating a section. The input R_386_GOT32X relocations, which
can be relaxed, should have been converted to R_386_PC32, R_386_32
or R_386_GOTOFF.
bfd/
PR ld/23189
* elf32-i386.c (elf_i386_relocate_section): Handle R_386_GOT32X
like R_386_GOT32.
* elfxx-x86.c (_bfd_x86_elf_link_symbol_references_local): Don't
set eh->local_ref to 1 for linker defined symbols.
ld/
PR ld/23189
* testsuite/ld-i386/i386.exp: Run pr23189.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-i386/pr23189.d: New file.
* testsuite/ld-i386/pr23189.s: Likewise.
* testsuite/ld-i386/pr23189.t: Likewise.
* testsuite/ld-x86-64/pr23189.d: Likewise.
* testsuite/ld-x86-64/pr23189.s: Likewise.
* testsuite/ld-x86-64/pr23189.t: Likewise.
gas * write.c (maybe_generate_build_notes): Generate notes on a
per-code-section basis. Skip linkonce sections.
ld * testsuite/ld-elf/notes.exp: New file: Run new test.
* testsuite/ld-elf/note1_1.s: New file: Source file for test.
* testsuite/ld-elf/note1_2.s: New file: Source file for test.
* testsuite/ld-elf/note1.r: New file: Expected readelf output.
If IFUNC symbol is defined in position-dependent executable, we should
change it to the normal function and set its address to its PLT entry
which should be resolved by R_*_IRELATIVE at run-time. All external
references should be resolved to its PLT in executable.
bfd/
PR ld/23169
* elf-ifunc.c (_bfd_elf_allocate_ifunc_dyn_relocs): Don't issue
an error on IFUNC pointer defined in PDE.
* elf32-i386.c (elf_i386_finish_dynamic_symbol): Call
_bfd_x86_elf_link_fixup_ifunc_symbol.
* elf64-x86-64.c (elf_x86_64_finish_dynamic_symbol): Likewise.
* elfxx-x86.c (_bfd_x86_elf_link_fixup_ifunc_symbol): New
function.
* elfxx-x86.h (_bfd_x86_elf_link_fixup_ifunc_symbol): New.
ld/
PR ld/23169
* testsuite/ld-ifunc/ifunc-9-i386.d: New file.
* testsuite/ld-ifunc/ifunc-9-x86-64.d: Likewise.
* testsuite/ld-ifunc/pr23169a.c: Likewise.
* testsuite/ld-ifunc/pr23169a.rd: Likewise.
* testsuite/ld-ifunc/pr23169b.c: Likewise.
* testsuite/ld-ifunc/pr23169b.c: Likewise.
* testsuite/ld-ifunc/pr23169c.rd: Likewise.
* testsuite/ld-ifunc/pr23169c.rd: Likewise.
* testsuite/ld-ifunc/ifunc-9-x86.d: Removed.
* testsuite/ld-ifunc/ifunc.exp: Run PR ld/23169 tests.
__bss_start, _end and _edata are defined by linker to mark regions
within executables and shared libraries. All references within
executables should be locally resolved.
This patch doesn't change how their references within shared libraries
are resolved.
bfd/
PR ld/23162
* elfxx-x86.c (elf_x86_linker_defined): New function.
(_bfd_x86_elf_link_check_relocs): Use it to mark __bss_start,
_end and _edata locally defined within executables.
ld/
PR ld/23162
* testsuite/ld-elf/pr23162.map: New file.
* testsuite/ld-elf/pr23162.rd: Likewise.
* testsuite/ld-elf/pr23162a.c: Likewise.
* testsuite/ld-elf/pr23162b.c: Likewise.
* testsuite/ld-elf/shared.exp: Run PR ld/23162 tests.
Sections may well belong in multiple segments. The testcase in the PR
saw an allocated section being assigned to an ABIFLAGS segment, then
not being assigned to a LOAD segment because it had already been
handled. To fix that particular problem this patch sets and tests
segment_mark only for LOAD segments. I kept the segment_mark test for
LOAD segments because I think there may otherwise be a problem with
zero size sections.
A few other problems showed up with the testcase. Some targets align
.dynamic, resulting in the test failing with "section .dynamic lma
0x800000c0 adjusted to 0x800000cc" and similar messages. I've tried
to handle that with some more hacks to the segment lma, which do the
right thing for the testcase, but may well fail in other situations.
I've also removed the tests of segment lma (p_paddr) and code involved
in deciding that an adjusted segment no longer covers the file or
program headers. Those test can't be correct in the face of objcopy
--change-section-lma. It may be necessary to reinstate the tests but
do them modulo page size, but we'll see how this goes.
PR 20659
bfd/
* elf.c (rewrite_elf_program_header): Use segment_mark only for
PT_LOAD headers. Delete first_matching_lma and first_suggested_lma.
Instead make matching_lma and suggested_lma pointers to the
sections. Align section vma and lma calculated from segment.
Don't clear includes_phdrs or includes_filehdr based on p_paddr
test. Try to handle alignment padding before first section by
adjusting new segment lma down. Adjust PT_PHDR map p_paddr.
ld/
* testsuite/ld-elf/changelma.d,
* testsuite/ld-elf/changelma.lnk,
* testsuite/ld-elf/changelma.s: New test.
My original implementation for LDI32 pseudo does not conform to
the TI ABI. I wrongly documented my TI PRU ELF object files inspection,
which got propagated into my binutils implementation.
Issue was exposed when running the GCC ABI testsuite against TI toolchain.
According to TI ABI, LDI32 must use first LDI instruction to load
the MSB 16bits, and second LDI instruction for the LSB 16bits.
This patch will break binary compatibility with previously released
binutils versions for PRU. Still, I think it is better to fix
binutils to conform to the chip vendor ABI.
bfd * elf32-pru.c (pru_elf32_do_ldi32_relocate): Make LDI32 relocation
conformant to TI ABI.
(pru_elf32_relax_section): Likewise.
(pru_elf_relax_delete_bytes): Fix offsets for new LDI32 code.
* elf32-pru.c (pru_elf32_do_ldi32_relocate): Ignore addend.
(pru_elf32_pmem_relocate): Trap - should not get here.
(pru_elf32_relocate_section): Add support for REL relocations.
(elf_info_to_howto_rel): Enable REL.
(elf_backend_may_use_rel_p): Likewise.
(elf_backend_may_use_rela_p): Likewise.
(elf_backend_default_use_rela_p): Likewise.
gas * config/tc-pru.c (md_apply_fix): Make LDI32 relocation conformant
to TI ABI.
(pru_assemble_arg_i): Likewise.
(output_insn_ldi32): Likewise.
* testsuite/gas/pru/ldi.d: Update test for the now fixed LDI32.
* gas/config/tc-pru.c (pru_assemble_arg_b): Check imm8 operand range.
* gas/testsuite/gas/pru/illegal2.l: New test.
* gas/testsuite/gas/pru/illegal2.s: New test.
* gas/testsuite/gas/pru/pru.exp: Register new illegal2 test.
ld * scripttempl/pru.sc: Add LD sections to allow linking TI
toolchain object files.
* scripttempl/pru.sc: Switch to init_array.
* testsuite/ld-pru/ldi32.d: Update LDI32 test to conform to TI ABI.
* testsuite/ld-pru/norelax_ldi32-data.d: Likewise.
* testsuite/ld-pru/norelax_ldi32-dis.d: Likewise.
* testsuite/ld-pru/relax_ldi32-data.d: Likewise.
* testsuite/ld-pru/relax_ldi32-dis.d: Likewise.
The _gp_disp is a magic symbol, always implicitly defined by the linker.
It does not make a sense to write it into symbol tables for output files.
Moreover, now if the linker gets a version script, the _gp_disp symbol
gets zero version definition index. The zero index means[1]:
"The symbol is local, not available outside the object."
But the _gp_disp symbol has GLOBAL binding. That confuses some tools
like for example the LLD linker when they get such files as inputs.
This patch fixes the problem - it prevents writing the _gp_disp symbol
in regular and dynamic symbol tables.
This was tested by running LD test suite on a mipsel-linux board.
References:
[1] "Linux Standard Base Specification", Section "10.7.2 Symbol
Version Table", p. 32
2018-05-03 Simon Atanasyan <simon@atanasyan.com>
bfd/
* elf32-mips.c: (elf32_mips_fixup_symbol): New function.
(elf_backend_fixup_symbol): New macro.
* elfxx-mips.c: (mips_elf_output_extsym): Discard _gp_disp
handling.
(_bfd_mips_elf_finish_dynamic_symbol): Likewise.
ld/
* testsuite/ld-mips-elf/gp-disp-sym.d: New test.
* testsuite/ld-mips-elf/gp-disp-sym.s: New test source.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new test.
* testsuite/ld-mips-elf/mips16-pic-2.ad: Update for _gp_disp
symbol removal.
* testsuite/ld-mips-elf/mips16-pic-2.nd: Likewise.
* testsuite/ld-mips-elf/pic-and-nonpic-3a.dd: Likewise.
* testsuite/ld-mips-elf/tlslib-o32-hidden.got: Likewise.
* testsuite/ld-mips-elf/tlslib-o32-ver.got: Likewise.
* testsuite/ld-mips-elf/tlslib-o32.got: Likewise.
Mark these `run_dump_test' cases across `ld-mips-elf/mips-elf.exp' that
are run unconditionally and require shared library support for exclusion
for targets that do not have such support, removing these failures:
FAIL: MIPS BAL/JALX in PIC mode
FAIL: microMIPS BAL/JALX in PIC mode
FAIL: MIPS BAL/JALX in PIC mode (ignore branch ISA)
FAIL: microMIPS BAL/JALX in PIC mode (ignore branch ISA)
FAIL: ld-mips-elf/hash1a
FAIL: ld-mips-elf/hash1b
FAIL: ld-mips-elf/hash1c
with `mipsel-ps2-elf' and `mips64el-ps2-elf' targets. Tests that are
guarded with `linux_gnu' will have to be reviewed separately.
ld/
* testsuite/ld-mips-elf/bal-jalx-pic.d: Only run for
`check_shared_lib_support' targets.
* testsuite/ld-mips-elf/bal-jalx-pic-n32.d: Likewise.
* testsuite/ld-mips-elf/bal-jalx-pic-n64.d: Likewise.
* testsuite/ld-mips-elf/bal-jalx-pic-micromips.d: Likewise.
* testsuite/ld-mips-elf/bal-jalx-pic-micromips-n32.d: Likewise.
* testsuite/ld-mips-elf/bal-jalx-pic-micromips-n64.d: Likewise.
* testsuite/ld-mips-elf/bal-jalx-pic-ignore.d: Likewise.
* testsuite/ld-mips-elf/bal-jalx-pic-ignore-n32.d: Likewise.
* testsuite/ld-mips-elf/bal-jalx-pic-ignore-n64.d: Likewise.
* testsuite/ld-mips-elf/bal-jalx-pic-ignore-micromips.d:
Likewise.
* testsuite/ld-mips-elf/bal-jalx-pic-ignore-micromips-n32.d:
Likewise.
* testsuite/ld-mips-elf/bal-jalx-pic-ignore-micromips-n64.d:
Likewise.
* testsuite/ld-mips-elf/hash1a.d: Likewise.
* testsuite/ld-mips-elf/hash1b.d: Likewise.
* testsuite/ld-mips-elf/hash1c.d: Likewise.
* testsuite/ld-mips-elf/relax-jalr-n32-shared.d: Likewise.
* testsuite/ld-mips-elf/relax-jalr-n64-shared.d: Likewise.
Implement a more complex way of selecting targets to include or exclude
with `run_dump_test' cases, by extending the syntax for the `target',
`not-target', `skip' and `not-skip' options (with the binutils and GAS
test suites) and the `target', `alltargets' and `notarget' options (with
the LD test suite) to also accept a name of a TCL procedure instead of a
target triplet glob matching expression. The result, 1 or 0, of the
procedure determines whether the test is to be run or not. This mimics
and expands `dg-require-effective-target' from the GCC test suite.
Names of TCL procedures are supplied in square brackets `[]' as with TCL
procedure calls, observing that target triplet glob matching expressions
do not normally start and end with matching square brackets both at a
time. Arguments for procedures are allowed if required.
Having a way to specify a complex condition for a `run_dump_test' case
to run has the advantage of keeping it local within the test case itself
where tool options related to the check might be also present, removing
the need to wrap `run_dump_test' calls into an `if' block whose only
reason is to do a feature check, and ultimately lets one have the test
reported as UNSUPPORTED automagically if required (not currently
supported by the `run_dump_test' options used for LD).
binutils/
* testsuite/lib/binutils-common.exp (match_target): New procedure.
* testsuite/lib/utils-lib.exp (run_dump_test): Use it in place
of `istarget' for matching with `target', `not-target', `skip'
and `not-skip' options.
gas/
* testsuite/lib/gas-defs.exp (run_dump_test): Use `match_target'
in place of `istarget' for matching with `target', `not-target',
`skip' and `not-skip' options.
ld/
* testsuite/lib/ld-lib.exp (run_dump_test): Use `match_target'
in place of `istarget' for matching with `target', `alltargets'
and `notarget' options.
Define and handle TLS relocations for FDPIC in BFD and gas.
In gas, the new relocations are rejected if the --fdpic option was not
specified.
We also define the __tdata_start symbol to mark the start of the
.tdata section. This allows FDPIC static binaries to find the start of
.tdata section, since phdr->p_vaddr of TLS segment is not a valid
value for FDPIC.
2018-04-25 Christophe Lyon <christophe.lyon@st.com>
Mickaël Guêné <mickael.guene@st.com>
bfd/:
* bfd-in2.h (BFD_RELOC_ARM_TLS_GD32_FDPIC)
(BFD_RELOC_ARM_TLS_LDM32_FDPIC, BFD_RELOC_ARM_TLS_IE32_FDPIC): New
relocations.
* elf32-arm.c (elf32_arm_howto_table_2): Add R_ARM_TLS_GD32_FDPIC,
R_ARM_TLS_LDM32_FDPIC, R_ARM_TLS_IE32_FDPIC relocations.
(elf32_arm_reloc_map): Add R_ARM_TLS_GD32_FDPIC,
R_ARM_TLS_LDM32_FDPIC, R_ARM_TLS_IE32_FDPIC.
(struct elf32_arm_link_hash_table): Update comment.
(elf32_arm_final_link_relocate): Handle TLS FDPIC relocations.
(IS_ARM_TLS_RELOC): Likewise.
(elf32_arm_check_relocs): Likewise.
(allocate_dynrelocs_for_symbol): Likewise.
(elf32_arm_size_dynamic_sections): Update comment.
* reloc.c: Add BFD_RELOC_ARM_TLS_GD32_FDPIC,
BFD_RELOC_ARM_TLS_LDM32_FDPIC, BFD_RELOC_ARM_TLS_IE32_FDPIC.
gas/
* config/tc-arm.c (reloc_names): Add TLSGD_FDPIC, TLSLDM_FDPIC,
GOTTPOFF_FDIC relocations.
(md_apply_fix): Handle the new TLS FDPIC relocations.
(tc_gen_reloc): Likewise.
(arm_fix_adjustable): Likewise.
include/
* elf/arm.h: Add R_ARM_TLS_GD32_FDPIC, R_ARM_TLS_LDM32_FDPIC,
R_ARM_TLS_IE32_FDPIC.
ld/
* scripttempl/elf.sc: Define __tdata_start for .tdata section.
