The pr19784 tests fail on ppc32 due to a gcc bug. The failure should
be noticed when building both libpr19784a.so and libpr19784b.so,
rather than ld building a buggy libpr19784a.so that fails at run time.
This patch fixes that by moving the @local ifunc check out of
check_relocs, where a call destination may not yet be known to be
ifunc. The patch also adds a related error for -mbss-plt code.
* elf32-ppc.c (ppc_elf_check_relocs): Move error for @local ifunc..
(ppc_elf_relocate_section): ..to here. Comment. Error on
detecting -mbss-plt -fPIC local ifuncs too.
(ppc_elf_size_dynamic_sections): Comment on unnecessary glink
branch table entries.
At the cost of an extra field in the symbol table hash entries, this
simplification to the relocate_section dynamic reloc test should help
maintainability.
* elf64-ppc.c (struct ppc_link_hash_entry): Add weakref.
(ppc64_elf_copy_indirect_symbol): Set weakref. Don't merge
dyn_relocs for weakdefs.
(alias_readonly_dynrelocs): New function.
(ppc64_elf_adjust_dynamic_symbol): Use alias_readonly_dynrelocs.
(ppc64_elf_relocate_section): Simplify condition under which
dyn_relocs are emitted.
This patch fixes quite a lot of confusion in allocate_dynrelocs over
ifuncs. Function descriptors make ELFv1 quite different to ELFv2.
PR 20472
* elf64-ppc.c (ppc64_elf_before_check_relocs): Tweak abiversion test.
(readonly_dynrelocs): Comment fix.
(global_entry_stub): New function.
(ppc64_elf_adjust_dynamic_symbol): Tweak abiversion test. Match
ELFv2 code deciding on dynamic relocs vs. global entry stubs to
that in size_global_entry_stubs, handling ifunc too. Delete dead
weak sym code.
(allocate_dynrelocs): Ensure dyn_relocs field is cleared when no
dyn_relocs are needed. Correct handling of ifunc dyn_relocs.
Tidy ELIMINATE_COPY_RELOCS code, only setting dynindx for
undefweak syms. Expand and correct comments.
(size_global_entry_stubs): Ensure symbol is defined.
(ppc64_elf_relocate_section): Match condition under which
dyn_relocs are emitted to that in allocate_dynrelocs.
Undefined weak functions, like __gmon_start__, were not being made
dynamic or emitting plt call code. While the behaviour of undefined
weak symbols is not defined in the ELF standard, the intention on
powerpc64 was to make it possible to link without a definition of such
symbols and at run time behave the same as if a definition was found
at link time in a shared library.
* elf64-ppc.c (ppc64_elf_adjust_dynamic_symbol): Don't exit with
non_got_ref true in any case where we could have generated dynbss
copies but decide not to do so.
For the case where a function which requires an LA25 stub is at the
beginning of a section we use a short sequence comprised of a LUI/ADDIU
instruction pair only and prepended to the associated function rather
than using a trailing jump to reach the function. This works by
checking for the offset into section of the function symbol being 0.
This is however never the case for microMIPS function symbols, which
have the ISA bit set. Consequently the short LA25 sequence is never
produced for microMIPS functions, like with the following example:
$ cat la25a.s
.abicalls
.global f1
.ent f1
f1:
.set noreorder
.cpload $25
.set reorder
.option pic0
jal f2
.option pic2
jr $31
.end f1
.global f2
.ent f2
f2:
jr $31
.end f2
$ cat la25b.s
.abicalls
.option pic0
.global __start
.ent __start
__start:
jal f1
jal f2
.end __start
$ as -mmicromips -32 -EB -o la25a.o la25a.s
$ as -mmicromips -32 -EB -o la25b.o la25b.s
$ ld -melf32btsmip -o la25 la25a.o la25b.o
$ objdump -d la25
la25: file format elf32-tradbigmips
Disassembly of section .text:
004000d0 <.pic.f2>:
4000d0: 41b9 0040 lui t9,0x40
4000d4: d420 0083 j 400106 <f2>
4000d8: 3339 0107 addiu t9,t9,263
4000dc: 0000 0000 nop
004000e0 <.pic.f1>:
4000e0: 41b9 0040 lui t9,0x40
4000e4: d420 0078 j 4000f0 <f1>
4000e8: 3339 00f1 addiu t9,t9,241
4000ec: 0000 0000 nop
004000f0 <f1>:
4000f0: 41bc 0002 lui gp,0x2
4000f4: 339c 801f addiu gp,gp,-32737
4000f8: 033c e150 addu gp,gp,t9
4000fc: f420 0083 jal 400106 <f2>
400100: 0000 0000 nop
400104: 45bf jrc ra
00400106 <f2>:
400106: 45bf jrc ra
...
00400110 <__start>:
400110: f420 0070 jal 4000e0 <.pic.f1>
400114: 0000 0000 nop
400118: f420 0068 jal 4000d0 <.pic.f2>
40011c: 0000 0000 nop
$
where `.pic.f1' could omit the trailing jump and the filler NOP and just
fall through to `f1'.
Correct the problem by masking out the ISA bit from microMIPS functions,
which fixes the earlier example:
$ objdump -d la25
la25: file format elf32-tradbigmips
Disassembly of section .text:
004000d0 <.pic.f2>:
4000d0: 41b9 0040 lui t9,0x40
4000d4: d420 0083 j 400106 <f2>
4000d8: 3339 0107 addiu t9,t9,263
...
004000e8 <.pic.f1>:
4000e8: 41b9 0040 lui t9,0x40
4000ec: 3339 00f1 addiu t9,t9,241
004000f0 <f1>:
4000f0: 41bc 0002 lui gp,0x2
4000f4: 339c 801f addiu gp,gp,-32737
4000f8: 033c e150 addu gp,gp,t9
4000fc: f420 0083 jal 400106 <f2>
400100: 0000 0000 nop
400104: 45bf jrc ra
00400106 <f2>:
400106: 45bf jrc ra
...
00400110 <__start>:
400110: f420 0074 jal 4000e8 <.pic.f1>
400114: 0000 0000 nop
400118: f420 0068 jal 4000d0 <.pic.f2>
40011c: 0000 0000 nop
$
There is no need to do anything for MIPS16 functions, because if any
LA25 stub has been generated for such a function, then it is only
required for an associated call thunk only, which is regular MIPS code
and the address of which, with the ISA bit clear, is returned by
`mips_elf_get_la25_target'.
This problem has been there since the beginning of microMIPS support:
commit df58fc944d
Author: Richard Sandiford <rdsandiford@googlemail.com>
Date: Sun Jul 24 14:20:15 2011 +0000
<https://sourceware.org/ml/binutils/2011-07/msg00198.html>, ("MIPS:
microMIPS ASE support").
bfd/
* elfxx-mips.c (mips_elf_add_la25_stub): Clear the ISA bit of
the stub address retrieved if associated with a microMIPS
function.
Fix a problem with missing microMIPS symbol annotation with microMIPS
LA25 stub symbols. The consequence of the issue is these symbols appear
in the symbol table as regular MIPS symbols with the ISA bit set, as
shown with the example below:
$ cat la25a.s
.abicalls
.global f1
.ent f1
f1:
.set noreorder
.cpload $25
.set reorder
.option pic0
jal f2
.option pic2
jr $31
.end f1
.global f2
.ent f2
f2:
jr $31
.end f2
$ cat la25b.s
.abicalls
.option pic0
.global __start
.ent __start
__start:
jal f1
jal f2
.end __start
$ as -mmicromips -32 -EB -o la25a.o la25a.s
$ as -mmicromips -32 -EB -o la25b.o la25b.s
$ ld -melf32btsmip -o la25 la25a.o la25b.o
$ readelf -s la25
Symbol table '.symtab' contains 18 entries:
Num: Value Size Type Bind Vis Ndx Name
0: 00000000 0 NOTYPE LOCAL DEFAULT UND
1: 00400098 0 SECTION LOCAL DEFAULT 1
2: 004000b0 0 SECTION LOCAL DEFAULT 2
3: 004000d0 0 SECTION LOCAL DEFAULT 3
4: 00000000 0 SECTION LOCAL DEFAULT 4
5: 00000000 0 SECTION LOCAL DEFAULT 5
6: 00418110 0 NOTYPE LOCAL DEFAULT 3 _gp
7: 004000e1 16 FUNC LOCAL DEFAULT 3 .pic.f1
8: 004000d1 16 FUNC LOCAL DEFAULT 3 .pic.f2
9: 00410120 0 NOTYPE GLOBAL DEFAULT 3 _fdata
10: 00400110 16 FUNC GLOBAL DEFAULT [MICROMIPS] 3 __start
11: 00400106 2 FUNC GLOBAL DEFAULT [MICROMIPS] 3 f2
12: 004000d0 0 NOTYPE GLOBAL DEFAULT 3 _ftext
13: 00410120 0 NOTYPE GLOBAL DEFAULT 3 __bss_start
14: 004000f0 22 FUNC GLOBAL DEFAULT [MICROMIPS] 3 f1
15: 00410120 0 NOTYPE GLOBAL DEFAULT 3 _edata
16: 00410120 0 NOTYPE GLOBAL DEFAULT 3 _end
17: 00410120 0 NOTYPE GLOBAL DEFAULT 3 _fbss
$
where microMIPS annotation is missing for `.pic.f1' and `.pic.f2' even
though these stubs are associated with microMIPS functions `f1' and `f2'
respectively.
Add the missing annotation then, by copying it from the function symbol
an LA25 stub is associated with, correcting the example above:
$ readelf -s la25
Symbol table '.symtab' contains 18 entries:
Num: Value Size Type Bind Vis Ndx Name
0: 00000000 0 NOTYPE LOCAL DEFAULT UND
1: 00400098 0 SECTION LOCAL DEFAULT 1
2: 004000b0 0 SECTION LOCAL DEFAULT 2
3: 004000d0 0 SECTION LOCAL DEFAULT 3
4: 00000000 0 SECTION LOCAL DEFAULT 4
5: 00000000 0 SECTION LOCAL DEFAULT 5
6: 00418110 0 NOTYPE LOCAL DEFAULT 3 _gp
7: 004000e0 16 FUNC LOCAL DEFAULT [MICROMIPS] 3 .pic.f1
8: 004000d0 16 FUNC LOCAL DEFAULT [MICROMIPS] 3 .pic.f2
9: 00410120 0 NOTYPE GLOBAL DEFAULT 3 _fdata
10: 00400110 16 FUNC GLOBAL DEFAULT [MICROMIPS] 3 __start
11: 00400106 2 FUNC GLOBAL DEFAULT [MICROMIPS] 3 f2
12: 004000d0 0 NOTYPE GLOBAL DEFAULT 3 _ftext
13: 00410120 0 NOTYPE GLOBAL DEFAULT 3 __bss_start
14: 004000f0 22 FUNC GLOBAL DEFAULT [MICROMIPS] 3 f1
15: 00410120 0 NOTYPE GLOBAL DEFAULT 3 _edata
16: 00410120 0 NOTYPE GLOBAL DEFAULT 3 _end
17: 00410120 0 NOTYPE GLOBAL DEFAULT 3 _fbss
$
This problem has been there since the beginning of microMIPS support:
commit df58fc944d
Author: Richard Sandiford <rdsandiford@googlemail.com>
Date: Sun Jul 24 14:20:15 2011 +0000
<https://sourceware.org/ml/binutils/2011-07/msg00198.html>, ("MIPS:
microMIPS ASE support").
bfd/
* elfxx-mips.c (mips_elf_create_stub_symbol): For a microMIPS
stub also add STO_MICROMIPS annotation.
Fix a linker regression introduced with commit 9d862524f6 ("MIPS:
Verify the ISA mode and alignment of branch and jump targets") causing a
build failure in microMIPS glibc where the `zdump' tool fails to link:
.../timezone/zdump.o: In function `yeartot':
.../timezone/zdump.c:758:(.text+0x62): Jump to a non-instruction-aligned address
.../timezone/zdump.c:758:(.text+0x76): Jump to a non-instruction-aligned address
.../timezone/zdump.c:768:(.text+0x112): Jump to a non-instruction-aligned address
.../timezone/zdump.c:774:(.text+0x1b8): Jump to a non-instruction-aligned address
.../timezone/zdump.c:774:(.text+0x1cc): Jump to a non-instruction-aligned address
collect2: error: ld returned 1 exit status
make[2]: *** [.../timezone/zdump] Error 1
The cause of the failure is the stricter check introduced with the said
change for jump and branch targets tripping on the address of microMIPS
LA25 stubs. Despite being microMIPS code these stubs do not have the
ISA bit set throughout the relocation calculation process, because they
have their address set to the memory offset into the stub section they
are placed in.
The `mips_elf_la25_stub' structure does not carry ISA mode information,
but there is no need to extend it, because the ISA mode can be inferred
from the original symbol, which will have STO_MICROMIPS annotation, so
use that instead to set the ISA bit appropriately. Also only LA25 stubs
associated with microMIPS symbols need to have the ISA bit set, because
other LA25 stubs are made with regular MIPS code, even if associated
with a MIPS16 symbol (in which case they are needed by a call thunk only
rather than the MIPS16 function proper).
bfd/
* elfxx-mips.c (mips_elf_calculate_relocation): Set the ISA bit
in microMIPS LA25 stub references.
* doc/chew.c (delete_string): Only free the string buffer if it is
there. Mark the buffer as NULL after freeing.
(drop): Free the dropped string.
(free_words): New function: Frees the memory allocated to the
dictionary.
(add_instrinsic): Duplicate the name string, so that it can be
freed later on.
(compile): Free unused words.
(main): Free the dictionary and top level string buffers at the
end.
bfd/
* elf32-arm.c (CMSE_PREFIX): Define macro.
(elf32_arm_stub_cmse_branch_thumb_only): Define stub sequence.
(cmse_branch_thumb_only): Declare stub.
(struct elf32_arm_link_hash_table): Define cmse_stub_sec field.
(elf32_arm_get_plt_info): Add globals parameter. Use it to return
FALSE if there is no PLT.
(arm_type_of_stub): Adapt to new elf32_arm_get_plt_info signature.
(elf32_arm_final_link_relocate): Likewise.
(elf32_arm_gc_sweep_hook): Likewise.
(elf32_arm_gc_mark_extra_sections): Mark sections holding ARMv8-M
secure entry functions.
(arm_stub_is_thumb): Add case for arm_stub_cmse_branch_thumb_only.
(arm_dedicated_stub_output_section_required): Change to a switch case
and add a case for arm_stub_cmse_branch_thumb_only.
(arm_dedicated_stub_output_section_required_alignment): Likewise.
(arm_stub_dedicated_output_section_name): Likewise.
(arm_stub_dedicated_input_section_ptr): Likewise and remove
ATTRIBUTE_UNUSED for htab parameter.
(arm_stub_required_alignment): Likewise.
(arm_stub_sym_claimed): Likewise.
(arm_dedicated_stub_section_padding): Likewise.
(cmse_scan): New function.
(elf32_arm_size_stubs): Call cmse_scan for ARM M profile targets.
Set stub_changed to TRUE if such veneers were created.
(elf32_arm_swap_symbol_in): Add detection code for CMSE special
symbols.
include/
* arm.h (ARM_GET_SYM_CMSE_SPCL): Define macro.
(ARM_SET_SYM_CMSE_SPCL): Likewise.
ld/
* ld.texinfo (Placement of SG veneers): New concept entry.
* testsuite/ld-arm/arm-elf.exp
(Secure gateway veneers: no .gnu.sgstubs section): New test.
(Secure gateway veneers: wrong entry functions): Likewise.
(Secure gateway veneers (ARMv8-M Baseline)): Likewise.
(Secure gateway veneers (ARMv8-M Mainline)): Likewise.
* testsuite/ld-arm/cmse-veneers.s: New file.
* testsuite/ld-arm/cmse-veneers.d: Likewise.
* testsuite/ld-arm/cmse-veneers.rd: Likewise.
* testsuite/ld-arm/cmse-veneers.sd: Likewise.
* testsuite/ld-arm/cmse-veneers-no-gnu_sgstubs.out: Likewise.
* testsuite/ld-arm/cmse-veneers-wrong-entryfct.out: Likewise.
Complement:
commit 1bbce13264
Author: Maciej W. Rozycki <macro@linux-mips.org>
Date: Mon Jun 24 23:55:46 2013 +0000
<https://sourceware.org/ml/binutils/2013-06/msg00077.html>, ("MIPS:
Compressed PLT/stubs support"), and also choose between regular and
compressed PLT entries as appropriate for any branches referring.
bfd/
* elfxx-mips.c (mips_elf_calculate_relocation): Handle branches
in PLT compression selection.
(_bfd_mips_elf_check_relocs): Likewise.
ld/
* testsuite/ld-mips-elf/compressed-plt-1.s: Add branch support.
* testsuite/ld-mips-elf/compressed-plt-1a.s: Likewise.
* testsuite/ld-mips-elf/compressed-plt-1b.s: Likewise.
* testsuite/ld-mips-elf/compressed-plt-1-o32-branch.od: New
test.
* testsuite/ld-mips-elf/compressed-plt-1-o32-branch.rd: New
test.
* testsuite/ld-mips-elf/compressed-plt-1-o32-mips16-bronly.od:
New test.
* testsuite/ld-mips-elf/compressed-plt-1-o32-mips16-bronly.rd:
New test.
* testsuite/ld-mips-elf/compressed-plt-1-o32-mips16-branch.od:
New test.
* testsuite/ld-mips-elf/compressed-plt-1-o32-mips16-branch.rd:
New test.
* testsuite/ld-mips-elf/compressed-plt-1-o32-umips-bronly.od:
New test.
* testsuite/ld-mips-elf/compressed-plt-1-o32-umips-bronly.rd:
New test.
* testsuite/ld-mips-elf/compressed-plt-1-o32-umips-branch.od:
New test.
* testsuite/ld-mips-elf/compressed-plt-1-o32-umips-branch.rd:
New test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
bfd * arc-got.h (relocate_fix_got_relocs_for_got_info): Handle the case
where there's no elf_link_hash_entry while processing GOT_NORMAL got
entries.
ld * testsuite/ld-arc/got-01.d: New file.
* testsuite/ld-arc/got-01.s: New file.
bfd/
* elf.c (_bfd_elf_filter_global_symbols): Skip local symbols.
(swap_out_syms): Return an error when not finding ELF output
section rather than asserting.
* elflink.c (elf_output_implib): Call bfd_set_error on no symbols.
ld/
* testsuite/lib/ld-lib.exp (run_ld_link_tests): Add optional
parameter to pass list of xfails.
* testsuite/ld-elf/elf.exp: Add xfails for implib tests. Tidy
implib test formatting. Don't set .data start address.
* testsuite/ld-elf/implib.s: Remove first .bss directive and
replace second one with equivalent .section directive.
* testsuite/ld-elf/empty-implib.out: Add expected final error.
* testsuite/ld-elf/implib.rd: Update.
Version 1a adds a pr_pid member containing the process ID of the
terminating process. The presence of pr_pid is inferred from the
note's size.
bfd/ChangeLog:
* elf.c (elfcore_grok_freebsd_psinfo): Check for minimum note size
and handle pr_pid if present.
* elf64-ppc.c (ppc64_elf_howto_raw <R_PPC64_PLTREL32>): Put
ppc64_elf_unhandled_reloc for special_function.
* elf32-ppc.c (ppc_elf_howto_raw): Similarly for lots of relocs.
Convert cross-mode regular MIPS and microMIPS BAL instructions to JALX,
similarly to how JAL instructions are converted.
bfd/
* elfxx-mips.c (mips_elf_perform_relocation): Convert cross-mode
BAL to JALX.
(_bfd_mips_elf_relocate_section) <bfd_reloc_outofrange>: Add a
corresponding error message.
gas/
* config/tc-mips.c (mips_force_relocation, mips_fix_adjustable):
Adjust comments for BAL to JALX linker conversion.
(fix_bad_cross_mode_branch_p): Accept cross-mode BAL.
* testsuite/gas/mips/unaligned-branch-1.l: Update error messages
expected.
* testsuite/gas/mips/unaligned-branch-micromips-1.l: Likewise.
* testsuite/gas/mips/branch-local-4.d: New test.
* testsuite/gas/mips/branch-local-n32-4.d: New test.
* testsuite/gas/mips/branch-local-n64-4.d: New test.
* testsuite/gas/mips/branch-addend.d: New test.
* testsuite/gas/mips/branch-addend-n32.d: New test.
* testsuite/gas/mips/branch-addend-n64.d: New test.
* testsuite/gas/mips/branch-local-4.s: New test source.
* testsuite/gas/mips/branch-addend.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* testsuite/ld-mips-elf/unaligned-branch-2.d: Update error
messages expected.
* testsuite/ld-mips-elf/unaligned-branch-r6-1.d: Likewise.
* testsuite/ld-mips-elf/unaligned-branch-mips16.d: Likewise.
* testsuite/ld-mips-elf/unaligned-branch-micromips.d: Likewise.
* testsuite/ld-mips-elf/bal-jalx-addend.d: New test.
* testsuite/ld-mips-elf/bal-jalx-local.d: New test.
* testsuite/ld-mips-elf/bal-jalx-pic.d: New test.
* testsuite/ld-mips-elf/bal-jalx-addend-n32.d: New test.
* testsuite/ld-mips-elf/bal-jalx-local-n32.d: New test.
* testsuite/ld-mips-elf/bal-jalx-pic-n32.d: New test.
* testsuite/ld-mips-elf/bal-jalx-addend-n64.d: New test.
* testsuite/ld-mips-elf/bal-jalx-local-n64.d: New test.
* testsuite/ld-mips-elf/bal-jalx-pic-n64.d: New test.
* testsuite/ld-mips-elf/unaligned-jalx-2.d: New test.
* testsuite/ld-mips-elf/unaligned-jalx-3.d: New test.
* testsuite/ld-mips-elf/unaligned-jalx-addend-2.d: New test.
* testsuite/ld-mips-elf/unaligned-jalx-addend-3.d: New test.
* testsuite/ld-mips-elf/unaligned-jalx-2.s: New test source.
* testsuite/ld-mips-elf/unaligned-jalx-3.s: New test source.
* testsuite/ld-mips-elf/unaligned-jalx-addend-2.s: New test
source.
* testsuite/ld-mips-elf/unaligned-jalx-addend-3.s: New test
source.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
Verify that the ISA mode of branch targets is the same as the referring
relocation, so that an attempt to produce a branch between instructions
encoded in different ISA modes each causes an error rather than silently
producing non-functional code. Make sure that no symbol or addend bits
are silently truncated: terminate with an error if the relocation value
calculated cannot be encoded in the relocatable field of a branch; for
REL targets also applying to any intermediate addend.
Also make jump target's alignment verification consistent with that for
branches.
This change will require an update to some obscure handcoded assembly
sources which make branches to labels placed at data objects, however
for microMIPS code only. These labels will have to be updated with the
`.insn' directive for containing code to assemble and link successfully.
Such code is broken as any such labels have always been required by the
microMIPS architecture specification[1][2] to be annotated this way for
correct interpretation, and with our old code missing `.insn' directives
caused labels to present different semantics depending on whether they
were referred with branch (ISA bit ignored) or other relocations (ISA
bit respected).
Enforcing these checks however will ensure errors in building software,
like mixed regular MIPS and microMIPS code links with branches between,
will be diagnosed at the build time rather than causing odd run-time
errors such as intermittent crashes. It will also let cross-mode BAL
instructions be converted to JALX instructions, with a separate change.
References:
[1] "MIPS Architecture for Programmers, Volume II-B: The microMIPS32
Instruction Set", MIPS Technologies, Inc., Document Number: MD00582,
Revision 5.04, January 15, 2014, Section 7.1 "Assembly-Level
Compatibility", p. 533
[2] "MIPS Architecture for Programmers, Volume II-B: The microMIPS64
Instruction Set", MIPS Technologies, Inc., Document Number: MD00594,
Revision 5.04, January 15, 2014, Section 8.1 "Assembly-Level
Compatibility", p. 623
bfd/
* elfxx-mips.c (b_reloc_p): Add R_MICROMIPS_PC16_S1,
R_MICROMIPS_PC10_S1 and R_MICROMIPS_PC7_S1.
(branch_reloc_p): New function.
(mips_elf_calculate_relocation): Handle ISA mode determination
for relocations against section symbols, against absolute
symbols and absolute relocations. Also set `*cross_mode_jump_p'
for branches.
<R_MIPS16_26, R_MIPS_26, R_MICROMIPS_26_S1>: Suppress alignment
checks for weak undefined symbols. Also check target alignment
within the same ISA mode.
<R_MIPS_PC16, R_MIPS_GNU_REL16_S2>: Handle cross-mode branches
in the alignment check.
<R_MICROMIPS_PC7_S1>: Add an alignment check.
<R_MICROMIPS_PC10_S1>: Likewise.
<R_MICROMIPS_PC16_S1>: Likewise.
(mips_elf_perform_relocation): Report a failure for unsupported
same-mode JALX instructions and cross-mode branches.
(_bfd_mips_elf_relocate_section) <bfd_reloc_outofrange>: Add
error messages for jumps to misaligned addresses.
gas/
* config/tc-mips.c (mips_force_relocation): Also retain branch
relocations against MIPS16 and microMIPS symbols.
(fix_bad_cross_mode_jump_p): New function.
(fix_bad_same_mode_jalx_p): Likewise.
(fix_bad_misaligned_jump_p): Likewise.
(fix_bad_cross_mode_branch_p): Likewise.
(fix_bad_misaligned_branch_p): Likewise.
(fix_validate_branch): Likewise.
(md_apply_fix) <BFD_RELOC_MIPS_JMP, BFD_RELOC_MIPS16_JMP>
<BFD_RELOC_MICROMIPS_JMP>: Separate from BFD_RELOC_MIPS_SHIFT5,
etc. Verify the ISA mode and alignment of the jump target.
<BFD_RELOC_MIPS_21_PCREL_S2>: Replace the inline alignment check
with a call to `fix_validate_branch'.
<BFD_RELOC_MIPS_26_PCREL_S2>: Likewise.
<BFD_RELOC_16_PCREL_S2>: Likewise.
<BFD_RELOC_MICROMIPS_7_PCREL_S1, BFD_RELOC_MICROMIPS_10_PCREL_S1>
<BFD_RELOC_MICROMIPS_16_PCREL_S1>: Retain the original addend.
Verify the ISA mode and alignment of the branch target.
(md_convert_frag): Verify the ISA mode and alignment of resolved
MIPS16 branch targets.
* testsuite/gas/mips/branch-misc-1.s: Annotate non-instruction
branch targets with `.insn'.
* testsuite/gas/mips/branch-misc-5.s: Likewise.
* testsuite/gas/mips/micromips@branch-misc-5-64.d: Update
accordingly.
* testsuite/gas/mips/micromips@branch-misc-5pic-64.d: Likewise.
* testsuite/gas/mips/micromips-branch-relax.s: Annotate
non-instruction branch target with `.insn'.
* testsuite/gas/mips/micromips.s: Replace microMIPS JALX targets
with external symbols.
* testsuite/gas/mips/micromips-insn32.d: Update accordingly.
* testsuite/gas/mips/micromips-noinsn32.d: Likewise.
* testsuite/gas/mips/micromips-trap.d: Likewise.
* testsuite/gas/mips/micromips.d: Likewise.
* testsuite/gas/mips/mips16.s: Annotate non-instruction branch
targets with `.insn'.
* testsuite/gas/mips/mips16.d: Update accordingly.
* testsuite/gas/mips/mips16-64.d: Likewise.
* testsuite/gas/mips/mips16-dwarf2.s: Annotate non-instruction
branch target with `.insn'.
* testsuite/gas/mips/relax-swap3.s: Likewise.
* testsuite/gas/mips/branch-local-2.l: New list test.
* testsuite/gas/mips/branch-local-3.l: New list test.
* testsuite/gas/mips/branch-local-n32-2.l: New list test.
* testsuite/gas/mips/branch-local-n32-3.l: New list test.
* testsuite/gas/mips/branch-local-n64-2.l: New list test.
* testsuite/gas/mips/branch-local-n64-3.l: New list test.
* testsuite/gas/mips/unaligned-jump-1.l: New list test.
* testsuite/gas/mips/unaligned-jump-2.l: New list test.
* testsuite/gas/mips/unaligned-jump-3.d: New test.
* testsuite/gas/mips/unaligned-jump-mips16-1.l: New list test.
* testsuite/gas/mips/unaligned-jump-mips16-2.l: New list test.
* testsuite/gas/mips/unaligned-jump-mips16-3.d: New test.
* testsuite/gas/mips/unaligned-jump-micromips-1.l: New list
test.
* testsuite/gas/mips/unaligned-jump-micromips-2.l: New list
test.
* testsuite/gas/mips/unaligned-jump-micromips-3.d: New test.
* testsuite/gas/mips/unaligned-branch-1.l: New list test.
* testsuite/gas/mips/unaligned-branch-2.l: New list test.
* testsuite/gas/mips/unaligned-branch-3.d: New test.
* testsuite/gas/mips/unaligned-branch-r6-1.l: New list test.
* testsuite/gas/mips/unaligned-branch-r6-2.l: New list test.
* testsuite/gas/mips/unaligned-branch-r6-3.l: New list test.
* testsuite/gas/mips/unaligned-branch-r6-4.l: New list test.
* testsuite/gas/mips/unaligned-branch-r6-5.d: New test.
* testsuite/gas/mips/unaligned-branch-r6-6.d: New test.
* testsuite/gas/mips/unaligned-branch-mips16-1.l: New list test.
* testsuite/gas/mips/unaligned-branch-mips16-2.l: New list test.
* testsuite/gas/mips/unaligned-branch-mips16-3.d: New test.
* testsuite/gas/mips/unaligned-branch-micromips-1.l: New list
test.
* testsuite/gas/mips/unaligned-branch-micromips-2.l: New list
test.
* testsuite/gas/mips/unaligned-branch-micromips-3.d: New test.
* testsuite/gas/mips/branch-local-2.s: New test source.
* testsuite/gas/mips/branch-local-3.s: New test source.
* testsuite/gas/mips/branch-local-n32-2.s: New test source.
* testsuite/gas/mips/branch-local-n32-3.s: New test source.
* testsuite/gas/mips/branch-local-n64-2.s: New test source.
* testsuite/gas/mips/branch-local-n64-3.s: New test source.
* testsuite/gas/mips/unaligned-jump-1.s: New test source.
* testsuite/gas/mips/unaligned-jump-2.s: New test source.
* testsuite/gas/mips/unaligned-jump-mips16-1.s: New test source.
* testsuite/gas/mips/unaligned-jump-mips16-2.s: New test source.
* testsuite/gas/mips/unaligned-jump-micromips-1.s: New test
source.
* testsuite/gas/mips/unaligned-jump-micromips-2.s: New test
source.
* testsuite/gas/mips/unaligned-branch-1.s: New test source.
* testsuite/gas/mips/unaligned-branch-2.s: New test source.
* testsuite/gas/mips/unaligned-branch-r6-1.s: New test source.
* testsuite/gas/mips/unaligned-branch-r6-2.s: New test source.
* testsuite/gas/mips/unaligned-branch-r6-3.s: New test source.
* testsuite/gas/mips/unaligned-branch-r6-4.s: New test source.
* testsuite/gas/mips/unaligned-branch-mips16-1.s: New test
source.
* testsuite/gas/mips/unaligned-branch-mips16-2.s: New test
source.
* testsuite/gas/mips/unaligned-branch-micromips-1.s: New test
source.
* testsuite/gas/mips/unaligned-branch-micromips-2.s: New test
source.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* testsuite/ld-mips-elf/unaligned-jalx-1.d: Update error message
expected.
* testsuite/ld-mips-elf/unaligned-jalx-addend-1.d: Likewise.
* testsuite/ld-mips-elf/unaligned-jalx-addend-mips16-1.d:
Likewise.
* testsuite/ld-mips-elf/unaligned-jalx-addend-micromips-1.d:
Likewise.
* testsuite/ld-mips-elf/unaligned-jalx-mips16-1.d: Likewise.
* testsuite/ld-mips-elf/unaligned-jalx-micromips-1.d: Likewise.
* testsuite/ld-mips-elf/undefweak-overflow.s: Add jumps,
microMIPS BAL and MIPS16 instructions.
* testsuite/ld-mips-elf/undefweak-overflow.d: Update
accordingly.
* testsuite/ld-mips-elf/unaligned-branch-2.d: New test.
* testsuite/ld-mips-elf/unaligned-branch-r6-1.d: New test.
* testsuite/ld-mips-elf/unaligned-branch-r6-2.d: New test.
* testsuite/ld-mips-elf/unaligned-branch-mips16.d: New test.
* testsuite/ld-mips-elf/unaligned-branch-micromips.d: New test.
* testsuite/ld-mips-elf/unaligned-jump-mips16.d: New test.
* testsuite/ld-mips-elf/unaligned-jump-micromips.d: New test.
* testsuite/ld-mips-elf/unaligned-jump.d: New test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
Some messing with plugin code in order to not need arelt_size in
ld code. File descriptor handling in ld/plugin.c is tidied too,
simply duping the open fd rather than opening the file again.
bfd/
* elflink.c: Include plugin-api.h.
* plugin.c (bfd_plugin_open_input): New function, extracted from..
(try_claim): ..here.
* plugin.h: Don't include bfd.h.
(bfd_plugin_open_input): Declare.
binutils/
* ar.c: Include plugin-api.h.
* nm.c: Likewise.
ld/
* plugin.c: Don't include libbfd.h. Include plugin-api.h
before bfd/plugin.h.
(plugin_object_p): Use bfd_plugin_open_input.
Not much to see here, just renaming a function.
bfd/
* targets.c (bfd_seach_for_target): Rename to..
(bfd_iterate_over_targets): ..this. Rewrite doc.
* bfd-in2.h: Regenerate.
ld/
* ldlang.c (open_output): Replace bfd_search_for_target with
bfd_iterate_over_targets. Localize vars.
bfd * elf32-arc.c (PR_DEBUG): Delete.
Fix printing of debug information. Fix formatting of debug
statements.
(debug_arc_reloc): Handle symbols that are not from an input file.
(arc_do_relocation): Remove excessive exclamation points.
(elf_arc_relocate_section): Print an informative message if the
relocation fails, even if debugging is not enabled.
* arc-got.h: Fix formatting. Fix printing of debug information.
(new_got_entry_to_list): Use xmalloc.
* config.bfd: use the big-endian arc vector as the default vector
for big-endian arc targets.
ld * testsuite/ld-arc/arc.exp: Always run the sda-relocs test in
little endian mode.
Fix a generic BFD issue with relocations against absolute symbols, which
are installed without using any individual relocation handler provided
by the backend. This causes any absolute section's addend to be lost on
REL targets such as o32 MIPS, and also relocation-specific calculation
adjustments are not made.
As an example assembling this program:
$ cat test.s
.text
foo:
b bar
b baz
.set bar, 0x1234
$ as -EB -32 -o test-o32.o test.s
$ as -EB -n32 -o test-n32.o test.s
produces this binary code:
$ objdump -dr test-o32.o test-n32.o
test-o32.o: file format elf32-tradbigmips
Disassembly of section .text:
00000000 <foo>:
0: 10000000 b 4 <foo+0x4>
0: R_MIPS_PC16 *ABS*
4: 00000000 nop
8: 1000ffff b 8 <foo+0x8>
8: R_MIPS_PC16 baz
c: 00000000 nop
test-n32.o: file format elf32-ntradbigmips
Disassembly of section .text:
00000000 <foo>:
0: 10000000 b 4 <foo+0x4>
0: R_MIPS_PC16 *ABS*+0x1230
4: 00000000 nop
8: 10000000 b c <foo+0xc>
8: R_MIPS_PC16 baz-0x4
c: 00000000 nop
$
where it is clearly visible in `test-o32.o', which uses REL relocations,
that the absolute section's addend equivalent to the value of `bar' -- a
reference to which cannot be fully resolved at the assembly time,
because the reference is PC-relative -- has been lost, as has been the
relocation-specific adjustment of -4, required to take into account the
PC+4-relative calculation made by hardware with branches and seen in the
external symbol reference to `baz' as the `ffff' addend encoded in the
instruction word. In `test-n32.o', which uses RELA relocations, the
absolute section's addend has been correctly retained.
Give precedence then in `bfd_perform_relocation' and
`bfd_install_relocation' to any individual relocation handler the
backend selected may have provided, while still resorting to the generic
calculation otherwise. This retains the semantics which we've had since
forever or before the beginning of our repository history, and is at the
very least compatible with `bfd_elf_generic_reloc' being used as the
handler.
Retain the `bfd_is_und_section' check unchanged at the beginning of
`bfd_perform_relocation' since this does not affect the semantics of the
function. The check returns the same `bfd_reloc_undefined' code the
check for a null `howto' does, so swapping the two does not matter.
Also the check is is mutually exclusive with the `bfd_is_abs_section'
check, since a section cannot be absolute and undefined both at once, so
swapping the two does not matter either.
With this change applied the program quoted above now has the in-place
addend correctly calculated and installed in the field being relocated:
$ objdump -dr fixed-o32.o
fixed-o32.o: file format elf32-tradbigmips
Disassembly of section .text:
00000000 <foo>:
0: 1000048c b 1234 <bar>
0: R_MIPS_PC16 *ABS*
4: 00000000 nop
8: 1000ffff b 8 <foo+0x8>
8: R_MIPS_PC16 baz
c: 00000000 nop
$
Add a set of MIPS tests to cover the relevant cases, including absolute
symbols with addends, and verifying that PC-relative relocations against
symbols concerned resolve to the same value in the final link regardless
of whether the REL or the RELA relocation form is used. Exclude linker
tests though which would overflow the in-place addend on REL targets and
use them as dump patterns for RELA targets only.
bfd/
* reloc.c (bfd_perform_relocation): Try the `howto' handler
first with relocations against absolute symbols.
(bfd_install_relocation): Likewise.
gas/
* testsuite/gas/mips/mips16-branch-absolute.d: Update patterns.
* testsuite/gas/mips/branch-absolute.d: New test.
* testsuite/gas/mips/branch-absolute-n32.d: New test.
* testsuite/gas/mips/branch-absolute-n64.d: New test.
* testsuite/gas/mips/branch-absolute-addend-n32.d: New test.
* testsuite/gas/mips/branch-absolute-addend-n64.d: New test.
* testsuite/gas/mips/mips16-branch-absolute-n32.d: New test.
* testsuite/gas/mips/mips16-branch-absolute-n64.d: New test.
* testsuite/gas/mips/mips16-branch-absolute-addend-n32.d: New
test.
* testsuite/gas/mips/mips16-branch-absolute-addend-n64.d: New
test.
* testsuite/gas/mips/micromips-branch-absolute.d: New test.
* testsuite/gas/mips/micromips-branch-absolute-n32.d: New test.
* testsuite/gas/mips/micromips-branch-absolute-n64.d: New test.
* testsuite/gas/mips/micromips-branch-absolute-addend-n32.d: New
test.
* testsuite/gas/mips/micromips-branch-absolute-addend-n64.d: New
test.
* testsuite/gas/mips/branch-absolute.s: New test source.
* testsuite/gas/mips/branch-absolute-addend.s: New test source.
* testsuite/gas/mips/mips16-branch-absolute-addend.s: New test
source.
* testsuite/gas/mips/micromips-branch-absolute.s: New test
source.
* testsuite/gas/mips/micromips-branch-absolute-addend.s: New
test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* testsuite/ld-mips-elf/branch-absolute.d: New test.
* testsuite/ld-mips-elf/branch-absolute-n32.d: New test.
* testsuite/ld-mips-elf/branch-absolute-n64.d: New test.
* testsuite/ld-mips-elf/branch-absolute-addend.d: New test.
* testsuite/ld-mips-elf/branch-absolute-addend-n32.d: New test.
* testsuite/ld-mips-elf/branch-absolute-addend-n64.d: New test.
* testsuite/ld-mips-elf/micromips-branch-absolute.d: New test.
* testsuite/ld-mips-elf/micromips-branch-absolute-n32.d: New
test.
* testsuite/ld-mips-elf/micromips-branch-absolute-n64.d: New
test.
* testsuite/ld-mips-elf/micromips-branch-absolute-addend.d: New
test.
* testsuite/ld-mips-elf/micromips-branch-absolute-addend-n32.d:
New test.
* testsuite/ld-mips-elf/micromips-branch-absolute-addend-n64.d:
New test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests, except
from `branch-absolute-addend' and
`micromips-branch-absolute-addend', referred indirectly only.
Align x86-64 .got and .got.plt sections to their entry size.
* elf64-x86-64.c (elf_x86_64_create_dynamic_sections): Align
.got/.got.plt sections to 8 bytes.
TLS relocations did not support multiple TLS modes for the same
symbol in a single object file.
Refactored how GOT and TLS is implemented. Removed code duplications between
local and global symbols conditioning.
bfd/ChangeLog:
2016-06-14 Cupertino Miranda <cmiranda@synopsys.com>
* arc-got.h: Moved got related structures from elf32-arc.c to
this file. More precisely, tls_type_e, tls_got_entries, got_entry.
* (arc_get_local_got_ents,
got_entry_for_type,
new_got_entry_to_list,
tls_type_for_reloc,
symbol_has_entry_of_type,
get_got_entry_list_for_symbol,
arc_got_entry_type_for_reloc,
ADD_SYMBOL_REF_SEC_AND_RELOC,
arc_fill_got_info_for_reloc,
relocate_fix_got_relocs_for_got_info,
create_got_dynrelocs_for_single_entry,
create_got_dynrelocs_for_got_info): Added to file.
* elf32-arc.c: Removed GOT & TLS related structs and functions to
arc-got.h.
Signed-off-by: Claudiu Zissulescu <claziss@synopsys.com>
The reloc for BFD_RELOC_32 was using the the 20-bit. This hack causes
problems in gdb. Fixed it to be the proper 32-bit reloc, R_FT32_32.
bfd/ChangeLog:
* elf32-ft32.c (ft32_reloc_map): Use R_FT32_32 for BFD_RELOC_32.
2016-07-05 Andre Vieria <andre.simoesdiasvieira@arm.com>
* elf32-arm.c (THUMB32_MOVT): New veneer macro.
(THUMB32_MOVW): Likewise.
(elf32_arm_stub_long_branch_thumb2_only_pure): New.
(DEF_STUBS): Define long_branch_thumb2_only_pure.
(arm_stub_is_thumb): Add new veneer stub.
(arm_type_of_stub): Use new veneer.
(arm_stub_required_alignment): Add new veneer.
2016-07-05 Andre Vieria <andre.simoesdiasvieira@arm.com>
* testsuite/ld-arm/farcall-thumb2-purecode.d: New test result.
* testsuite/ld-arm/farcall-thumb2-purecode.s: New test.
* testsuite/ld-arm/arm-elf.exp: Run it.
2016-07-01 Thomas Preud'homme <thomas.preudhomme@arm.com>
bfd/
* elf32-arm.c (using_thumb2_bl): New function.
(arm_type_of_stub): Declare thumb2 variable together and change type
to bfd_boolean. Use using_thumb2_bl () to determine whether
THM_MAX_FWD_BRANCH_OFFSET or THM2_MAX_FWD_BRANCH_OFFSET should be
checked for BL range.
(elf32_arm_final_link_relocate): Use using_thumb2_bl () to determine
the bit size of BL offset.
ld/
* testsuite/ld-arm/arm-elf.exp (Thumb-2 BL): Assemble for ARMv7.
(Thumb-2 BL on ARMv6-M): New testcase.
* testsuite/ld-arm/thumb2-bl.d: Do not try to match testcase filename.
* testsuite/ld-arm/thumb2-bl.s: Do not select architecture.
bfd * elfnn-aarch64.c (is_aarch64_mapping_symbol): New function.
Returns TRUE for AArch64 mapping symbols.
(elfNN_aarch64_backend_symbol_processing): New function. Marks
mapping symbols as precious in object files so that they will not
be stripped.
(elf_backend_symbol_processing): Define.
* elf32-arm.c (is_arm_mapping_symbol): New function. Returns TRUE
for ARM mapping symbols.
(elf32_arm_backend_symbol_processing): Make use of the new function.
No need to check version if symbol is unreferenced and undefined.
bfd/
PR ld/20306
* elflink.c (elf_link_check_versioned_symbol): Return false
for unreferenced undefined symbol.
ld/testsuite/
* testsuite/ld-gc/gc.exp: Run pr20306 test.
* ld-gc/pr20306.c: New file.
* ld-gc/pr20306.d: Likewise.
bfin * elf32-bfin.c (bfin_adjust_dynamic_symbol): Fail if a COPY reloc
is needed.
ld * testsuite/ld-elf/comm-data.exp: Expect comm-data2 test to fail
for bfin.
* testsuite/ld-elf/elf.exp: Expect pr14170 and symbolic function
tests to fail for bfin.
* testsuite/ld-elf/endsym.d: Expect to fail with cr16, crx, dlx,
nds32 and visium.
* testsuite/ld-elf/var1.d: Expect to fail with d30v, dlx, ft32 and
microblaze.
* testsuite/ld-pe/pe.exp: Expect foreign symbol test to fail for
mcore-pe.
* elf32-arm.c (elf32_arm_backend_symbol_processing): New
function. Marks mapping symbols in object files as precious, so
that strip will not remove them.
(elf_backend_symbol_processing): Define.
bfd * elfxx-sparc.c (_bfd_sparc_elf_relocate_section): Don't convert
R_SPARC_32 to R_SPARC_RELATIVE if class is ELFCLASS64.
gold * sparc.cc (Target_sparc::Scan::local): Don't convert R_SPARC_32
to R_SPARC_RELATIVE if class is ELFCLASS64.
(Target_sparc::Scan::global): Likewise.
ld * testsuite/ld-elf/symbolic-func.r: Allow non-zero offsets from
.text.
b399102 fixed the testcase in this PR but it may be possible to
trigger the problem in other ways.
PR ld/19264
* elf64-ppc.c (STUB_SHRINK_ITER): Define.
(ppc64_elf_size_stubs): Exit stub sizing loop past STUB_SHRINK_ITER
if shrinking stubs.
(ppc64_elf_size_stubs): Adjust to suit.
The procstat AUXV core dump note in FreeBSD consists of 32-bit integer
followed by an array of auxiliary vector entries.
bfd/ChangeLog:
* elf.c (elfcore_grok_freebsd_note): Handle NT_FREEBSD_PROCSTAT_AUXV
notes.
Move parsing of FreeBSD-specific ELF core notes out of elfcore_grok_note
into a new elfcore_grok_freebsd_note function. Add core note grok routines
for FreeBSD's psinfo and prstatus notes while here rather than depending
on the native handling in elfcore_grok_note.
bfd/ChangeLog:
* elf.c (elfcore_grok_note): Remove handling of NT_X86_XSTATE for
FreeBSD. Remove case for NT_FREEBSD_THRMISC.
(elfcore_grok_freebsd_psinfo): New function.
(elfcore_grok_freebsd_prstatus): New function.
(elfcore_grok_freebsd_note): New function.
(elf_parse_notes): Use "elfcore_grok_freebsd_note" for "FreeBSD"
notes.
Some MIPS targets use a named section symbol rather than a symbol with
no name as is used with most ELF targets. When renaming sections, the
named section symbol needs to be renamed too.
Rather than fix this bug, I'd originally intended to just correct the
xfail added recently for update-1.o vs update4.o in update-section.exp,
using the same set of targets for the localize-hidden-1 mips xfail.
I'd extracted that target test into a new function, is_bad_symtab. It
turns out to be useful in readelf.exp too.
bfd/
* config.bfd: Delete mips vxworks patterns matched earlier.
Combine mips*-*-none with mips*-*-elf*.
binutils/
* objcopy.c (find_section_rename): Forward declare. Remove
ibfd and sec_ptr param. Add old_name param. Allow for NULL
returned_flags. Move read of section name and flags to..
(setup_section): ..here. Update find_section_rename call.
(filter_symbols): Rename section symbols for renamed sections.
(copy_object): Call filter_symbols when renamed sections.
* testsuite/lib/binutils-common.exp (is_bad_symtab): New.
* testsuite/binutils-all/update-section.exp: Revert 96037eb0
mips xfail.
* testsuite/binutils-all/objcopy.exp (copy_executable): Use
is_bad_symtab.
(localize-hidden-1): xfail if is_bad_symtab.
* testsuite/binutils-all/readelf.exp: Use is_bad_symtab to select
between mips/tmips.
As with commit ed53407eec ("MIPS/BFD: Don't stop processing on
`bfd_reloc_outofrange'") don't bail out right away and instead continue
processing on a cross-mode jump conversion error, so that any further
issues are also reported. Adjust message formatting accordingly, using
`%X' to abort processing at conclusion. Remove the full stop from the
end of the message, for consistency across error reporting.
Adjust the corresponding test case accordingly and make it trigger the
error twice.
bfd/
* elfxx-mips.c (mips_elf_perform_relocation): Call
`info->callbacks->einfo' rather than `*_bfd_error_handler' and
use the `%X%H' format for the cross-mode jump conversion error
message. Remove the full stop from the end of the message.
Continue processing rather than returning failure.
ld/
* testsuite/ld-mips-elf/mode-change-error-1a.s: Trigger an error
twice rather than once.
* testsuite/ld-mips-elf/mode-change-error-1.d: Adjust
accordingly. Remove the full stop from the end of the message.
ELF linker shouldn't skip the IR object when searching the symbol table
of an archive element. If linker doesn't know if the object file is an
IR object, it should give LTO plugin a chance to get the correct symbol
table and use the IR symbol table if the input is an IR object.
bfd/
PR ld/18250
PR ld/20267
* elflink.c: Include plugin.h if BFD_SUPPORTS_PLUGINS is
defined.
(elf_link_is_defined_archive_symbol): Call
bfd_link_plugin_object_p on unknown plugin object and use the
IR symbol table if the input is an IR object.
* plugin.c (bfd_link_plugin_object_p): New function.
* plugin.h (bfd_link_plugin_object_p): New prototype.
ld/
PR ld/20267
* testsuite/ld-plugin/lto.exp (lto_link_tests): Add test for
PR ld/20267.
(lto_run_tests): Likewise.
* testsuite/ld-plugin/pr20267a.c: New file.
* testsuite/ld-plugin/pr20267b.c: Likewise.
Also, don't check alignment on symbol from plugin dummy input.
bfd/
PR ld/20276
* elflink.c (elf_link_add_object_symbols): Don't check alignment
on symbol from plugin dummy input.
ld/
PR ld/20276
* plugin.c (plugin_notice): Set non_ir_ref on common symbols.
* testsuite/ld-plugin/lto.exp (lto_link_tests): Add test for
PR ld/20276.
(lto_run_tests): Likewise.
* testsuite/ld-plugin/pass.out: New file.
* testsuite/ld-plugin/pr20276a.c: Likewise.
* testsuite/ld-plugin/pr20276b.c: Likewise.
2016-06-17 Thomas Preud'homme <thomas.preudhomme@arm.com>
Tony Wang <tony.wang@arm.com>
bfd/
* elf32-arm.c (elf32_arm_stub_long_branch_thumb2_only): Define stub
sequence.
(stub_long_branch_thumb2_only): Define stub.
(arm_stub_is_thumb): Add case for arm_stub_long_branch_thumb2_only.
(arm_stub_long_branch_thumb2_only): Likewise.
(arm_type_of_stub): Use arm_stub_long_branch_thumb2_only for Thumb-2
capable targets.
ld/
* testsuite/ld-arm/arm-elf.exp (Thumb-Thumb farcall M profile):
Assemble for ARMv6-M.
(Thumb2-Thumb2 farcall M profile): New testcase.
* testsuite/ld-arm/farcall-thumb2-thumb2-m.d: New file.
* testsuite/ld-arm/jump-reloc-veneers-cond-long-backward.d: Update to
reflect the use of Thumb-2 veneers for Thumb-2 capable targets.
* testsuite/ld-arm/jump-reloc-veneers-cond-long.d: Likewise.
This patch adds support for the opcode architectures
SPARC_OPCODE_ARCH_V9{C,D,E,V,M} and its associated BFD machine numbers
bfd_mach_sparc_v9{c,d,e,v,m} and bfd_mach_sparc_v8plus{c,d,e,v,m}.
Note that for arches up to v9b (UltraSPARC III), the detection of the
BFD machine type was based on the bits in the e_machine field of the ELF
header. However, there are no more available bits in that field, so
this patch takes the approach of using the hardware capabilities stored
in the object attributes HWCAPS/HWCAPS2 in order to characterize the
machine the object was built for.
bfd/ChangeLog:
2016-06-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* archures.c (bfd_mach_sparc_v8plusc): Define.
(bfd_mach_sparc_v9c): Likewise.
(bfd_mach_sparc_v8plusd): Likewise.
(bfd_mach_sparc_v9d): Likewise.
(bfd_mach_sparc_v8pluse): Likewise.
(bfd_mach_sparc_v9e): Likewise.
(bfd_mach_sparc_v8plusv): Likewise
(bfd_mach_sparc_v9v): Likewise.
(bfd_mach_sparc_v8plusm): Likewise.
(bfd_mach_sparc_v9m): Likewise.
(bfd_mach_sparc_v9_p): Adapt to v8plusm and v9m.
(bfd_mach_sparc_64bit_p): Likewise.
* bfd-in2.h: Regenerate.
* cpu-sparc.c (arch_info_struct): Add entries for
bfd_mach_sparc_v8plus{c,d,e,v,m} and bfd_mach_sparc_v9{c,d,e,v,m}.
* aoutx.h (machine_type): Handle bfd_mach_sparc_v8plus{c,d,e,v,m}
and bfd_mach_sparc_v9{c,d,e,v,m}.
* elf32-sparc.c (elf32_sparc_final_write_processing): Likewise.
* elfxx-sparc.c (_bfd_sparc_elf_object_p): Likewise.
include/ChangeLog:
2016-06-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* opcode/sparc.h (enum sparc_opcode_arch_val): Add
SPARC_OPCODE_ARCH_V9C, SPARC_OPCODE_ARCH_V9D,
SPARC_OPCODE_ARCH_V9E, SPARC_OPCODE_ARCH_V9V and
SPARC_OPCODE_ARCH_V9M.
opcodes/ChangeLog:
2016-06-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* sparc-dis.c (MASK_V9): Add SPARC_OPCODE_ARCH_V9{C,D,E,V,M}.
(compute_arch_mask): Handle bfd_mach_sparc_v8plus{c,d,e,v,m} and
bfd_mach_sparc_v9{c,d,e,v,m}.
* sparc-opc.c (MASK_V9C): Define.
(MASK_V9D): Likewise.
(MASK_V9E): Likewise.
(MASK_V9V): Likewise.
(MASK_V9M): Likewise.
(v6): Add MASK_V9{C,D,E,V,M}.
(v6notlet): Likewise.
(v7): Likewise.
(v8): Likewise.
(v9): Likewise.
(v9andleon): Likewise.
(v9a): Likewise.
(v9b): Likewise.
(v9c): Define.
(v9d): Likewise.
(v9e): Likewise.
(v9v): Likewise.
(v9m): Likewise.
(sparc_opcode_archs): Add entry for v9{c,d,e,v,m}.
This was broken by 4ade44b727,
which changed the calculation to use the .rela.plt linker section
instead of its output section - thus skipping .rela.iplt .
Fix the calculations to include it.
bfd/ChangeLog:
* elf32-s390.c (elf_s390_finish_dynamic_sections): Include
.rela.iplt in DT_PLTRELSZ.
* elf64-s390.c (elf_s390_finish_dynamic_sections): Likewise,
for DT_PLTRELSZ and DT_RELASZ as well.
Don't do anything special with non-loaded, non-alloced sections.
In particular, any relocs in such sections should not affect GOT
and PLT reference counting (ie. we don't allow them to create GOT
or PLT entries), there's no possibility or desire to optimize TLS
relocs, and there's not much point in propagating relocs to shared
libs that the dynamic linker won't relocate.
* elf32-i386.c (elf_i386_check_relocs): Skip relocations in
non-loaded, non-alloced sections.
* elf64-x86-64.c (elf_x86_64_check_relocs): Likewise.
This patch fixes another edge case related to alignment property
records - reloc offsets adjacent to property record offsets were not
getting adjusted during relaxation.
bfd/
PR ld/20254
* elf32-avr.c (elf32_avr_relax_delete_bytes): Adjust reloc
offsets until reloc_toaddr.
ld/
PR ld/20254
* testsuite/ld-avr/avr-prop-6.d: New test.
* testsuite/ld-avr/avr-prop-6.s: New test.
elf_{i386|x86_64}_reloc_type_class should return reloc_class_ifunc for
R_386_IRELATIVE/R_X86_64_IRELATIVE relocations. There is no need to
check symbol type for STN_UNDEF symbol index.
* elf32-i386.c (elf_i386_reloc_type_class): Check R_386_IRELATIVE.
Don't check symbol type for STN_UNDEF symbol index.
* elf64-x86-64.c (elf_x86_64_reloc_type_class): Check
R_X86_64_IRELATIVE. Don't check symbol type for STN_UNDEF symbol
index.
2016-06-14 Thomas Preud'homme <thomas.preudhomme@arm.com>
bfd/
* elf32-arm.c (using_thumb_only): Force review of arch check logic for
new architecture.
(using_thumb2): Try Tag_THUMB_ISA_use first and check
for exact arch value then. Force review of arch check logic for new
architecture.
(arch_has_arm_nop): Update and fix arch check logic. Force review of
that logic for new architecture.
(arch_has_thumb2_nop): Remove.
(elf32_arm_tls_relax): Use using_thumb2 instead of above function.
(elf32_arm_final_link_relocate): Likewise but using thumb2.
Many more places use abfd->my_archive rather than bfd_my_archive (abfd),
so let's make the code consistently use the first idiom.
bfd/
* bfd-in.h (bfd_my_archive): Delete.
* bfd-in2.h: Regenerate.
binutils/
* ar.c: Expand uses of bfd_my_archive.
* size.c: Likewise.
ld/
* ldlang.c: Expand uses of bfd_my_archive.
* ldmain.c: Likewise.
* ldmisc.c: Likewise.
* plugin.c: Likewise.
LTO plugin support in plugin_maybe_claim wants to close the IR bfd
after replacing it with the recompiled object, but can't do so for
archive elements due to various pointers that access the archive bfd.
Thin archives have the same problem. They too cannot have their
element bfds closed.
PR ld/20241
bfd/
* archive.c (open_nested_file): Set my_archive.
* bfd.c (_bfd_default_error_handler <%B>): Exclude archive file name
for thin archives.
* bfdio.c (bfd_tell): Don't adjust origin for thin archives.
(bfd_seek): Likewise.
* bfdwin.c (bfd_get_file_window): Likewise.
* cache.c (cache_bmmap): Likewise.
(bfd_cache_lookup_worker): Don't look in my_archive for thin archives.
* mach-o.c (bfd_mach_o_follow_dsym): Don't open my_archive for
thin archives.
* plugin.c (try_claim): Likewise.
* xcofflink.c (xcoff_link_add_dynamic_symbols): Use import path of
file within thin archive, not the archive.
binutils/
* bucomm.c (bfd_get_archive_filename): Return file name within thin
archive.
ld/
* ldmain.c (add_archive_element): Just print file name of file within
thin archives.
* ldmisc.c (vfinfo): Likewise.
* plugin.c (plugin_object_p): Open file within thin archives.
(plugin_maybe_claim): Expand comment.
Add the GOT base for R_386_GOT32/R_386_GOT32X relocations against IFUNC
symbols if there is no base register and disallow them for PIC.
bfd/
PR ld/20244
* elf32-i386.c (elf_i386_relocate_section): Add the .got.plt
section address for R_386_GOT32/R_386_GOT32X relocations against
IFUNC symbols if there is no base register and return error for
PIC.
ld/
PR ld/20244
* testsuite/ld-i386/i386.exp: Run pr20244-2a, pr20244-2b,
pr20244-2c and pr20244-2d.
* testsuite/ld-i386/no-plt.exp: Run pr20244-3a and pr20244-3b.
* testsuite/ld-i386/pr20244-2.s: New file.
* testsuite/ld-i386/pr20244-2a.d: Likewise.
* testsuite/ld-i386/pr20244-2b.d: Likewise.
* testsuite/ld-i386/pr20244-2c.d: Likewise.
* testsuite/ld-i386/pr20244-2d.d: Likewise.
* testsuite/ld-i386/pr20244-3a.c: Likewise.
* testsuite/ld-i386/pr20244-3b.S: Likewise.
* testsuite/ld-i386/pr20244-3c.S: Likewise.
* testsuite/ld-i386/pr20244-3d.S: Likewise.
Complement:
commit b47468a6db
Author: Catherine Moore <clm@redhat.com>
Date: Mon May 6 15:25:45 2013 +0000
and the return of support for R_MIPS_PC32 there.
bfd/
* elf32-mips.c (elf_mips_gnu_pcrel32): Update comment.
- Correctly solved relocations on the .got header.
- This bug arrised from enabling RELRO (-z combreloc).
Because the .got and .got.plt sections were split in new linker
scripts the header is no longer part of sgotplt contents.
Changed the patch to sgot contents instead.
- Latest fix to .got header relocs.
bfd/
2016-06-13 Cupertino Miranda <cmiranda@synospsy.com>
* elf32-arc.c (elf_arc_finish_dynamic_sections): Changed.
Fail safe for trying to reloc GOT and PLT on non dynamic linker. Fix
issue with dynamic relocs not being generated with -pie. Removed some
structures that were not being used. Fixed typo changing RELENT to
RELAENT. Fix for all SECTOFF relocations.
bfd/
2016-06-13 Cupertino Miranda <cmiranda@synospsy.com>
* elf32-arc.c (arc_local_data, arc_local_data): Removed.
(SECTSTART): Changed.
(elf_arc_relocate_section): Fixed mistake in PIE related
condition.
(elf_arc_size_dynamic_sections): Changed DT_RELENT to DT_RELAENT.
bfd/
2016-06-13 Cupertino Miranda <cmiranda@synospsy.com>
* elf32-arc.c (elf32_arc_reloc_type_class): Defined function to
enable support for "-z combreloc" and DT_RELACOUNT.
(elf_backend_reloc_type_class): Likewise
When relocating R_386_GOT32 in "op $0, bar@GOT", we shouldn't subtract
GOT base without a base register and we should disallow it without a
base register for PIC.
bfd/
PR ld/20244
* elf32-i386.c (elf_i386_relocate_section): When relocating
R_386_GOT32, return error without a base register for PIC and
subtract the .got.plt section address only with a base register.
ld/
PR ld/20244
* testsuite/ld-i386/i386.exp: Run pr20244-1a and pr20244-1b.
* testsuite/ld-i386/pr20244-1.s: New file.
* testsuite/ld-i386/pr20244-1a.d: Likewise.
* testsuite/ld-i386/pr20244-1b.d: Likewise.
* testsuite/ld-i386/pr20244-1c.d: Likewise.
I noticed when writing _bfd_elf_strtab_save/restore that size_t would
be better than bfd_size_type for a number of things in elf-strtab.c.
Using a 64-bit bfd_size_type on a 32-bit host doesn't make much sense
for array sizes and indices.
* elf-strtab.c (struct strtab_save): Use size_t for "size".
(struct elf_strtab_hash): Likewise for "size" and "alloced".
(_bfd_elf_strtab_init): Formatting.
(_bfd_elf_strtab_add): Return size_t rather than bfd_size_type.
(_bfd_elf_strtab_addref): Take size_t idx param.
(_bfd_elf_strtab_delref, _bfd_elf_strtab_refcount): Likewise.
(_bfd_elf_strtab_offset): Likewise.
(_bfd_elf_strtab_clear_all_refs): Use size_t idx.
(_bfd_elf_strtab_save): Use size_t "idx" and "size" vars.
(_bfd_elf_strtab_restore, _bfd_elf_strtab_emit): Similarly.
(_bfd_elf_strtab_finalize): Similarly.
* elf-bfd.h (_bfd_elf_strtab_add): Update prototypes.
(_bfd_elf_strtab_addref, _bfd_elf_strtab_delref): Likewise.
(_bfd_elf_strtab_refcount, _bfd_elf_strtab_offset): Likewise.
* elf.c (bfd_elf_get_elf_syms): Calculate symbol buffer size
using bfd_size_type.
(bfd_section_from_shdr): Delete amt.
(_bfd_elf_init_reloc_shdr): Likewise.
(_bfd_elf_link_assign_sym_version): Likewise.
(assign_section_numbers): Use size_t reloc_count.
* elflink.c (struct elf_symbuf_head): Use size_t "count".
(bfd_elf_link_record_dynamic_symbol): Use size_t for some vars.
(elf_link_is_defined_archive_symbol): Likewise.
(elf_add_dt_needed_tag): Likewise.
(elf_finalize_dynstr): Likewise.
(elf_link_add_object_symbols): Likewise.
(bfd_elf_size_dynamic_sections): Likewise.
(elf_create_symbuf): Similarly.
(bfd_elf_match_symbols_in_sections): Likewise.
(elf_link_swap_symbols_out): Likewise.
(elf_link_check_versioned_symbol): Likewise.
(bfd_elf_gc_record_vtinherit): Likewise.
(bfd_elf_gc_common_finalize_got_offsets): Likewise.
This patch fixes an edge case in linker relaxation that causes symbol
values to be computed incorrectly in the presence of align directives
in input source code.
bfd/
* elf32-avr.c (elf32_avr_relax_delete_bytes): Adjust syms
and relocs only if shrinking occurred.
ld/
* testsuite/ld-avr/avr-prop-5.d: New.
* testsuite/ld-avr/avr-prop-5.s: New.
We can generate i386 TLS code sequences for general and local dynamic
models without PLT, which uses indirect call via GOT:
call *___tls_get_addr@GOT(%reg)
where EBX register isn't required as GOT base, instead of direct call:
call ___tls_get_addr[@PLT]
which requires EBX register as GOT base.
Since direct call is 4-byte long and indirect call, is 5-byte long, the
extra one byte must be handled properly.
For general dynamic model, 7-byte lea instruction before call instruction
is replaced by 6-byte one to make room for indirect call. For local
dynamic model, we simply use 5-byte indirect call.
TLS linker optimization is updated to recognize new instruction patterns.
For local dynamic model to local exec model transition, we generate
a 6-byte lea instruction as nop, instead of a 1-byte nop plus a 4-byte
lea instruction. Since linker may convert
call ___tls_get_addr[@PLT]
to
addr32 call ____tls_get_addr
when producing static executable, both patterns are recognized.
bfd/
* elf64-i386.c (elf_i386_link_hash_entry): Add tls_get_addr.
(elf_i386_link_hash_newfunc): Initialize tls_get_addr to 2.
(elf_i386_check_tls_transition): Check indirect call and direct
call with the addr32 prefix for general and local dynamic models.
Set the tls_get_addr feild.
(elf_i386_convert_load_reloc): Always use addr32 prefix for
indirect ___tls_get_addr call via GOT.
(elf_i386_relocate_section): Handle GD->LE, GD->IE and LD->LE
transitions with indirect call and direct call with the addr32
prefix.
ld/
* testsuite/ld-i386/i386.exp: Run libtlspic2.so, tlsbin2,
tlsgd3, tlsld2, tlsgd4, tlspie3a, tlspie3b and tlspie3c.
* testsuite/ld-i386/pass.out: New file.
* testsuite/ld-i386/tls-def1.c: Likewise.
* testsuite/ld-i386/tls-gd1.S: Likewise.
* testsuite/ld-i386/tls-ld1.S: Likewise.
* testsuite/ld-i386/tls-main1.c: Likewise.
* testsuite/ld-i386/tls.exp: Likewise.
* testsuite/ld-i386/tlsbin2-nacl.rd: Likewise.
* testsuite/ld-i386/tlsbin2.dd: Likewise.
* testsuite/ld-i386/tlsbin2.rd: Likewise.
* testsuite/ld-i386/tlsbin2.sd: Likewise.
* testsuite/ld-i386/tlsbin2.td: Likewise.
* testsuite/ld-i386/tlsbinpic2.s: Likewise.
* testsuite/ld-i386/tlsgd3.dd: Likewise.
* testsuite/ld-i386/tlsgd3.s: Likewise.
* testsuite/ld-i386/tlsgd4.d: Likewise.
* testsuite/ld-i386/tlsgd4.s: Likewise.
* testsuite/ld-i386/tlsld2.s: Likewise.
* testsuite/ld-i386/tlspic2-nacl.rd: Likewise.
* testsuite/ld-i386/tlspic2.dd: Likewise.
* testsuite/ld-i386/tlspic2.rd: Likewise.
* testsuite/ld-i386/tlspic2.sd: Likewise.
* testsuite/ld-i386/tlspic2.td: Likewise.
* testsuite/ld-i386/tlspic3.s: Likewise.
* testsuite/ld-i386/tlspie3.s: Likewise.
* testsuite/ld-i386/tlspie3a.d: Likewise.
* testsuite/ld-i386/tlspie3b.d: Likewise.
* testsuite/ld-i386/tlspie3c.d: Likewise.
The only non-comment fix here is in the code writing out the 3 fixed
.got.plt entries - it mistakenly put a 64-bit 0 at offsets 8 and 12
instead of 8 and 16.
bfd/ChangeLog:
* elf32-s390.c (elf_s390_finish_dynamic_symbol): Fix comment.
* elf64-s390.c (elf_s390x_plt_entry): Fix comment.
(elf_s390_relocate_section): Fix comment.
(elf_s390_finish_dynamic_sections): Fix initialization of fixed
.got.plt entries.
Embedding the .plt section in another revealed a bug in the way the
larl operand of the first magic plt entry is being calculated. Fixed
with the attached patch.
bfd/ChangeLog:
* elf64-s390.c (elf_s390_finish_dynamic_sections): Subtract plt
section offset when calculation the larl operand in the first PLT
entry.
ld/ChangeLog:
* testsuite/ld-s390/pltoffset-1.dd: New test.
* testsuite/ld-s390/pltoffset-1.ld: New test.
* testsuite/ld-s390/pltoffset-1.s: New test.
* testsuite/ld-s390/s390.exp: Run new test.
VLE is an encoding, not a particular processor architecture, so it
isn't really proper to select insns based on PPC_OPCODE_VLE. For
example
{"evaddw", VX (4, 512), VX_MASK, PPCSPE|PPCVLE, PPCNONE, {RS, RA, RB}},
{"vaddubs", VX (4, 512), VX_MASK, PPCVEC|PPCVLE, PPCNONE, {VD, VA, VB}},
shows two insns that have the same encoding, both available with VLE.
Enabling both with VLE means we can't disassemble the second variant
even if -Maltivec is given rather than -Mspe. Also, we don't check
user assembly against the processor type as well as we could.
Another problem is that when using the VLE encoding, insns from the
main ppc opcode table are not available, except those using opcode 4
and 31. Correcting this revealed two errors in the ld testsuite,
use of "nop" and "rfmci" when -mvle.
This patch fixes those problems in the opcode table, and removes
PPCNONE. I find a plain 0 distracts less from other values.
In addition, I've implemented code to recognize some machine values
from the apuinfo note present in ppc32 objects. It's not a complete
disambiguation since we're lacking info to detect newer chips, but
what we have should help with disassembly.
include/
* elf/ppc.h (APUINFO_SECTION_NAME, APUINFO_LABEL, PPC_APUINFO_ISEL,
PPC_APUINFO_PMR, PPC_APUINFO_RFMCI, PPC_APUINFO_CACHELCK,
PPC_APUINFO_SPE, PPC_APUINFO_EFS, PPC_APUINFO_BRLOCK,
PPC_APUINFO_VLE: Define.
opcodes/
* ppc-dis.c (ppc_opts): Delete extraneous parentheses. Default
cpu for "vle" to e500.
* ppc-opc.c (ALLOW8_SPRG): Remove PPC_OPCODE_VLE.
(NO371, PPCSPE, PPCISEL, PPCEFS, MULHW, DCBT_EO): Likewise.
(PPCNONE): Delete, substitute throughout.
(powerpc_opcodes): Remove PPCVLE from "flags". Add to "deprecated"
except for major opcode 4 and 31.
(vle_opcodes <se_rfmci>): Add PPCRFMCI to flags.
bfd/
* cpu-powerpc.c (powerpc_compatible): Allow bfd_mach_ppc_vle entry
to match other 32-bit archs.
* elf32-ppc.c (_bfd_elf_ppc_set_arch): New function.
(ppc_elf_object_p): Call it.
(ppc_elf_special_sections): Use APUINFO_SECTION_NAME. Fix
overlong line.
(APUINFO_SECTION_NAME, APUINFO_LABEL): Don't define here.
* elf64-ppc.c (ppc64_elf_object_p): Call _bfd_elf_ppc_set_arch.
* bfd-in.h (_bfd_elf_ppc_at_tls_transform,
_bfd_elf_ppc_at_tprel_transform): Move to..
* elf-bfd.h: ..here.
(_bfd_elf_ppc_set_arch): Declare.
* bfd-in2.h: Regenerate.
gas/
* config/tc-ppc.c (PPC_APUINFO_ISEL, PPC_APUINFO_PMR,
PPC_APUINFO_RFMCI, PPC_APUINFO_CACHELCK, PPC_APUINFO_SPE,
PPC_APUINFO_EFS, PPC_APUINFO_BRLOCK, PPC_APUINFO_VLE): Don't define.
(ppc_setup_opcodes): Check vle disables powerpc_opcodes overridden
by vle_opcodes, and that vle flag doesn't enable opcodes. Don't
add vle_opcodes twice.
(ppc_cleanup): Use APUINFO_SECTION_NAME and APUINFO_LABEL.
ld/
* testsuite/ld-powerpc/apuinfo1.s: Delete nop.
* testsuite/ld-powerpc/apuinfo-vle2.s: New.
* testsuite/ld-powerpc/powerpc.exp: Use apuinfo-vle2.s.
We can generate x86-64 TLS code sequences for general and local dynamic
models without PLT, which uses indirect call via GOT:
call *__tls_get_addr@GOTPCREL(%rip)
instead of direct call:
call __tls_get_addr[@PLT]
Since direct call is 4-byte long and indirect call, is 5-byte long, the
extra one byte must be handled properly.
For general dynamic model, one 0x66 prefix before call instruction is
removed to make room for indirect call. For local dynamic model, we
simply use 5-byte indirect call.
TLS linker optimization is updated to recognize new instruction patterns.
For local dynamic model to local exec model transition, we generate
4 0x66 prefixes, instead of 3, before mov instruction in 64-bit and
generate a 5-byte nop, instead of 4-byte, before mov instruction in
32-bit. Since linker may convert
call *__tls_get_addr@GOTPCREL(%rip)
to
addr32 call __tls_get_addr
when producing static executable, both patterns are recognized.
bfd/
* elf64-x86-64.c (elf_x86_64_link_hash_entry): Add tls_get_addr.
(elf_x86_64_link_hash_newfunc): Initialize tls_get_addr to 2.
(elf_x86_64_check_tls_transition): Check indirect call and
direct call with the addr32 prefix for general and local dynamic
models. Set the tls_get_addr feild.
(elf_x86_64_convert_load_reloc): Always use addr32 prefix for
indirect __tls_get_addr call via GOT.
(elf_x86_64_relocate_section): Handle GD->LE, GD->IE and LD->LE
transitions with indirect call and direct call with the addr32
prefix.
ld/
* testsuite/ld-x86-64/pass.out: New file.
* testsuite/ld-x86-64/tls-def1.c: Likewise.
* testsuite/ld-x86-64/tls-gd1.S: Likewise.
* testsuite/ld-x86-64/tls-ld1.S: Likewise.
* testsuite/ld-x86-64/tls-main1.c: Likewise.
* testsuite/ld-x86-64/tls.exp: Likewise.
* testsuite/ld-x86-64/tlsbin2-nacl.rd: Likewise.
* testsuite/ld-x86-64/tlsbin2.dd: Likewise.
* testsuite/ld-x86-64/tlsbin2.rd: Likewise.
* testsuite/ld-x86-64/tlsbin2.sd: Likewise.
* testsuite/ld-x86-64/tlsbin2.td: Likewise.
* testsuite/ld-x86-64/tlsbinpic2.s: Likewise.
* testsuite/ld-x86-64/tlsgd10.dd: Likewise.
* testsuite/ld-x86-64/tlsgd10.s: Likewise.
* testsuite/ld-x86-64/tlsgd11.dd: Likewise.
* testsuite/ld-x86-64/tlsgd11.s: Likewise.
* testsuite/ld-x86-64/tlsgd12.d: Likewise.
* testsuite/ld-x86-64/tlsgd12.s: Likewise.
* testsuite/ld-x86-64/tlsgd13.d: Likewise.
* testsuite/ld-x86-64/tlsgd13.s: Likewise.
* testsuite/ld-x86-64/tlsgd14.dd: Likewise.
* testsuite/ld-x86-64/tlsgd14.s: Likewise.
* testsuite/ld-x86-64/tlsgd5c.s: Likewise.
* testsuite/ld-x86-64/tlsgd6c.s: Likewise.
* testsuite/ld-x86-64/tlsgd9.dd: Likewise.
* testsuite/ld-x86-64/tlsgd9.s: Likewise.
* testsuite/ld-x86-64/tlsld4.dd: Likewise.
* testsuite/ld-x86-64/tlsld4.s: Likewise.
* testsuite/ld-x86-64/tlsld5.dd: Likewise.
* testsuite/ld-x86-64/tlsld5.s: Likewise.
* testsuite/ld-x86-64/tlsld6.dd: Likewise.
* testsuite/ld-x86-64/tlsld6.s: Likewise.
* testsuite/ld-x86-64/tlspic2-nacl.rd: Likewise.
* testsuite/ld-x86-64/tlspic2.dd: Likewise.
* testsuite/ld-x86-64/tlspic2.rd: Likewise.
* testsuite/ld-x86-64/tlspic2.sd: Likewise.
* testsuite/ld-x86-64/tlspic2.td: Likewise.
* testsuite/ld-x86-64/tlspic3.s: Likewise.
* testsuite/ld-x86-64/tlspie2.s: Likewise.
* testsuite/ld-x86-64/tlspie2a.d: Likewise.
* testsuite/ld-x86-64/tlspie2b.d: Likewise.
* testsuite/ld-x86-64/tlspie2c.d: Likewise.
* testsuite/ld-x86-64/tlsgd5.dd: Updated.
* testsuite/ld-x86-64/tlsgd6.dd: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run libtlspic2.so, tlsbin2,
tlsgd5b, tlsgd6b, tlsld4, tlsld5, tlsld6, tlsgd9, tlsgd10,
tlsgd11, tlsgd14, tlsgd12, tlsgd13, tlspie2a, tlspie2b and
tlspie2c.
bfd/
* coff-z8k.c (extra_case): Fix range check for R_JR relocation.
ld/
* ld/testsuite/ld-z8k/0filler.s: New file.
* ld/testsuite/ld-z8k/branch-target.s: New file.
* ld/testsuite/ld-z8k/branch-target2.s: New file.
* ld/testsuite/ld-z8k/calr-back-8001.d: New file.
* ld/testsuite/ld-z8k/calr-back-8002.d: New file.
* ld/testsuite/ld-z8k/calr-back-fail-8001.d: New file.
* ld/testsuite/ld-z8k/calr-back-fail-8002.d: New file.
* ld/testsuite/ld-z8k/calr-forw-8001.d: New file.
* ld/testsuite/ld-z8k/calr-forw-8002.d: New file.
* ld/testsuite/ld-z8k/calr-forw-fail-8001.d: New file.
* ld/testsuite/ld-z8k/calr-forw-fail-8002.d: New file.
* ld/testsuite/ld-z8k/calr-opcode.s: New file.
* ld/testsuite/ld-z8k/dbjnz-forw-8001.d: New file.
* ld/testsuite/ld-z8k/dbjnz-forw-8002.d: New file.
* ld/testsuite/ld-z8k/dbjnz-forw-fail-8001.d: New file.
* ld/testsuite/ld-z8k/dbjnz-forw-fail-8002.d: New file.
* ld/testsuite/ld-z8k/dbjnz-opcode.s: New file.
* ld/testsuite/ld-z8k/djnz-back-8001.d: New file.
* ld/testsuite/ld-z8k/djnz-back-8002.d: New file.
* ld/testsuite/ld-z8k/djnz-back-fail-8001.d: New file.
* ld/testsuite/ld-z8k/djnz-back-fail-8002.d: New file.
* ld/testsuite/ld-z8k/djnz-forw-8001.d: New file.
* ld/testsuite/ld-z8k/djnz-forw-8002.d: New file.
* ld/testsuite/ld-z8k/djnz-forw-fail-8001.d: New file.
* ld/testsuite/ld-z8k/djnz-forw-fail-8002.d: New file.
* ld/testsuite/ld-z8k/djnz-opcode.s: New file.
* ld/testsuite/ld-z8k/filler.s: New file.
* ld/testsuite/ld-z8k/jr-back-8001.d: New file.
* ld/testsuite/ld-z8k/jr-back-8002.d: New file.
* ld/testsuite/ld-z8k/jr-back-fail-8001.d: New file.
* ld/testsuite/ld-z8k/jr-back-fail-8002.d: New file.
* ld/testsuite/ld-z8k/jr-forw-8001.d: New file.
* ld/testsuite/ld-z8k/jr-forw-8002.d: New file.
* ld/testsuite/ld-z8k/jr-forw-fail-8001.d: New file.
* ld/testsuite/ld-z8k/jr-forw-fail-8002.d: New file.
* ld/testsuite/ld-z8k/jr-opcode.s: New file.
* ld/testsuite/ld-z8k/ldr-back-8001.d: New file.
* ld/testsuite/ld-z8k/ldr-back-8002.d: New file.
* ld/testsuite/ld-z8k/ldr-back-fail-8001.d: New file.
* ld/testsuite/ld-z8k/ldr-back-fail-8002.d: New file.
* ld/testsuite/ld-z8k/ldr-forw-8001.d: New file.
* ld/testsuite/ld-z8k/ldr-forw-8002.d: New file.
* ld/testsuite/ld-z8k/ldr-forw-fail-8001.d: New file.
* ld/testsuite/ld-z8k/ldr-forw-fail-8002.d: New file.
* ld/testsuite/ld-z8k/ldr-opcode.s: New file.
* ld/testsuite/ld-z8k/ldrb-forw-8001.d: New file.
* ld/testsuite/ld-z8k/ldrb-forw-8002.d: New file.
* ld/testsuite/ld-z8k/ldrb-forw-fail-8001.d: New file.
* ld/testsuite/ld-z8k/ldrb-forw-fail-8002.d: New file.
* ld/testsuite/ld-z8k/ldrb-opcode.s: New file.
* ld/testsuite/ld-z8k/ldrb-opcode2.s: New file.
* ld/testsuite/ld-z8k/other-file.s: New file.
* ld/testsuite/ld-z8k/reloc.dd: New file.
* ld/testsuite/ld-z8k/reloc.ld: New file.
* ld/testsuite/ld-z8k/relocseg.dd: New file.
* ld/testsuite/ld-z8k/relocseg.ld: New file.
* ld/testsuite/ld-z8k/relocseg1.dd: New file.
* ld/testsuite/ld-z8k/test-ld.sh: New file.
* ld/testsuite/ld-z8k/this-file.s: New file.
* ld/testsuite/ld-z8k/z8k.exp: New file.
This reverts the pr16467 change, which was incorrect due to faulty
analysis of the pr16467 testcase. The failure was not due to a
mismatch in symbol type (ifunc/non-ifunc) but due to a symbol loop
being set up.
See https://sourceware.org/ml/binutils/2016-06/msg00013.html for some
rambling on versioned symbols and ELF shared library symbol overriding
that explain this patch.
bfd/
PR ld/20159
PR ld/16467
* elflink.c (_bfd_elf_merge_symbol): Revert PR16467 change.
(_bfd_elf_add_default_symbol): Don't indirect to/from defined
symbol given a version by a script different to the version
of the symbol being added.
(elf_link_add_object_symbols): Use _bfd_elf_strtab_save and
_bfd_elf_strtab_restore. Don't fudge dynstr references.
* elf-strtab.c (_bfd_elf_strtab_restore_size): Delete.
(struct strtab_save): New.
(_bfd_elf_strtab_save, _bfd_elf_strtab_restore): New functions.
* elf-bfd.h (_bfd_elf_strtab_restore_size): Delete.
(_bfd_elf_strtab_save, _bfd_elf_strtab_restore): Declare.
Fix internal errors like:
ld: BFD (GNU Binutils) 2.26.51.20160526 internal error, aborting at .../bfd/elfxx-mips.c:10278 in _bfd_mips_elf_relocate_section
ld: Please report this bug.
triggered by the `bfd_reloc_outofrange' condition on branch relocations.
bfd/
* elfxx-mips.c (b_reloc_p): New function.
(_bfd_mips_elf_relocate_section) <bfd_reloc_outofrange>: Handle
branch relocations.
ld/
* testsuite/ld-mips-elf/unaligned-branch.d: New test.
* testsuite/ld-mips-elf/unaligned-branch.s: New test source.
* testsuite/ld-mips-elf/unaligned-text.s: New test source.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new test.
The original MIPS SVR4 psABI defines the calculation for the R_MIPS_26
relocation in a complex way, as follows[1]:
Name Value Field Symbol Calculation
R_MIPS_26 4 T-targ26 local (((A << 2) | \
(P & 0xf0000000)) + S) >> 2
4 T-targ26 external (sign-extend(A << 2) + S) >> 2
This is further clarified, by correcting typos (already applied in the
excerpt above) in the 64-bit psABI extension[2]. A note is included in
both documents to specify that for the purpose of relocation processing
a local symbol is one with binding STB_LOCAL and type STT_SECTION, and
otherwise, a symbol is external.
We have both calculations implemented for the R_MIPS_26 relocation, and
by extension also for the R_MIPS16_26 and R_MICROMIPS_26_S1 relocations,
from now on collectively called jump relocations. However our code uses
a different condition to tell local and external symbols apart, that is
it only checks for the STB_LOCAL binding and ignores the symbol type,
however for REL relocations only. The external calculation is used for
all RELA jump relocations.
In reality the difference matters for jump relocations referring local
MIPS16 and, as from recent commit 44d3da2338 ("MIPS/GAS: Treat local
jump relocs the same no matter if REL or RELA"), also local microMIPS
symbols. Such relocations are not converted to refer to corresponding
section symbols instead and retain the original local symbol reference.
It can be inferred from the relocation calculation definitions that the
addend is effectively unsigned for the local case and explicitly signed
for the external case. With the REL relocation format it makes sense
given the limited range provided for by the field being relocated: the
use of an unsigned addend expands the range by one bit for the local
case, because a negative offset from a section symbol makes no sense,
and any usable negative offset from the original local symbol will have
worked out positive if converted to a section-relative reference. In
the external case a signed addend gives more flexibility as offsets both
negative and positive can be used with a symbol. Any such offsets will
typically have a small value.
The inclusion of the (P & 0xf0000000) component, ORed in the calculation
in the local case, seems questionable as bits 31:28 are not included in
the relocatable field and are masked out as the relocation is applied.
Their value is therefore irrelevant for output processing, the relocated
field ends up the same regardless of their value. They could be used
for overflow detection, however this is precluded by adding them to bits
31:28 of the symbol referred, as the sum will not correspond to the
value calculated by the processor at run time whenever bits 31:28 of the
symbol referred are not all zeros, even though it is valid as long they
are the same as bits 31:28 of P.
We deal with this problem by ignoring any overflow resulting from the
local calculation. This however makes us miss genuine overflow cases,
where 31:28 of the symbol referred are different from bits 31:28 of P,
and non-functional code is produced.
Given the situation, for the purpose of overflow detection we can change
our code to follow the original psABI and only treat the in-place addend
as unsigned in the section symbol case, permitting jumps to offsets
128MiB and above into section. Sections so large may be uncommon, but
still a reasonable use case. On the other hand such large offsets from
regular local symbols are not expected and it makes sense to support
(possibly small) negative offsets instead, also in consistency with what
we do for global symbols.
Drop the (P & 0xf0000000) component then, treat the addend as signed
with local non-section symbols and also detect an overflow in the result
of such calculation with local symbols. NB it does not affect the value
computed for the relocatable field, it only affects overflow detection.
References:
[1] "SYSTEM V APPLICATION BINARY INTERFACE, MIPS RISC Processor
Supplement, 3rd Edition", Figure 4-11: "Relocation Types", p. 4-19
<http://www.linux-mips.org/pub/linux/mips/doc/ABI/mipsabi.pdf>
[2] "64-bit ELF Object File Specification, Draft Version 2.5", Table 32
"Relocation Types", p. 45
<http://techpubs.sgi.com/library/manuals/4000/007-4658-001/pdf/007-4658-001.pdf>
bfd/
* elfxx-mips.c (mips_elf_calculate_relocation): <R_MIPS16_26>
<R_MIPS_26, R_MICROMIPS_26_S1>: Drop the region bits of the
reloc location from calculation, treat the addend as signed with
local non-section symbols and enable overflow detection.
ld/
* testsuite/ld-mips-elf/jal-global-overflow-0.d: New test.
* testsuite/ld-mips-elf/jal-global-overflow-1.d: New test.
* testsuite/ld-mips-elf/jal-local-overflow-0.d: New test.
* testsuite/ld-mips-elf/jal-local-overflow-1.d: New test.
* testsuite/ld-mips-elf/jal-global-overflow.s: New test source.
* testsuite/ld-mips-elf/jal-local-overflow.s: New test source.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
On RELA targets the addend can affect JALX target's alignment, so only
verify it once the whole relocation calculation has completed.
bfd/
* elfxx-mips.c (mips_elf_calculate_relocation) <R_MIPS16_26>
<R_MIPS_26, R_MICROMIPS_26_S1>: Include the addend in JALX's
target alignment verification.
ld/
* testsuite/ld-mips-elf/unaligned-jalx-addend-0.d: New test.
* testsuite/ld-mips-elf/unaligned-jalx-addend-1.d: New test.
* testsuite/ld-mips-elf/unaligned-jalx-addend-mips16-0.d: New
test.
* testsuite/ld-mips-elf/unaligned-jalx-addend-mips16-1.d: New
test.
* testsuite/ld-mips-elf/unaligned-jalx-addend-micromips-0.d: New
test.
* testsuite/ld-mips-elf/unaligned-jalx-addend-micromips-1.d: New
test.
* testsuite/ld-mips-elf/unaligned-jalx-addend-0.s: New test
source.
* testsuite/ld-mips-elf/unaligned-jalx-addend-1.s: New test
source.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
