Reworded some messages.
Warn if bfd-assembler explicit selection on command line is overridden by
target requiring it be set. (No targets override to clear currently.)
to want it that way.
(ecoff_build_symbols): Turn local st_Proc symbols into
st_StaticProc symbols. Set index field of external st_Proc and
st_staticProc symbols correctly.
* config/tc-mips.h (NO_LISTING): Don't define. People might want
listings.
Now gas_test accepts an argument listing options to be tried, individually
or in combination, and whether output should be expected.
Proc gas_test_error says output should be expected.
Still not checking exit status properly, though.
(2) remove smallbook/cropmarks comments; switching to smallbook is now
automatic w/house style
(3) use `|' alternative convention for SPARC dependent options.
UnGNUish, but the convention is used for other machines in this book.
(4) cease eliding paragraph about purpose of assembler in Hitachi configuration
(5) use SPECIAL-SYMS switch more consistently
(6) formatting improvements from Q1 release
(7) use explicit @page instead of @group in long examples listing
instruction-set summaries (because some new texinfo bug leads to
double-spacing with @group in this context)
(8) rearrange H8/500 instruction-set summary into two cols
(9) include GPL from texinfo directory rather than duplicating here
texinfo conditionals
(as.ms, as.mm, as.me targets) update for new structure, and add note that
these targets probably broken until texi2roff supports
texinfo conditionals
(clean-dvi target) new; clean dvi files and side effects
(clean-info target) clean out only info files
(clean target) run clean-dvi, clean-info
* as.c (perform_an_assemly_pass): Don't set output_section here.
* expr.c (expr_part, expr): Turn off section assertions for ECOFF,
since it has additional sections.
* read.c (s_lcomm): For MIPS ECOFF, put small objects in .sbss,
not bss_section.
* config/obj-ecoff.h (TARGET_SYMBOL_FIELDS): Added
ecoff_undefined field.
* config/obj-ecoff.c (obj_symbol_new_hook): Initialize
ecoff_undefined field.
(add_file): If using stabs, just output a stabs symbol rather than
creating a new fdr.
(obj_ecoff_begin, obj_ecoff_bend): Ignore line number by reading
it with get_absolute_expression, rather than skipping it by hand.
(obj_ecoff_loc): If using stabs, just output a stabs symbol rather
than ECOFF line number information.
(obj_ecoff_stab): Accept non-zero values for stabs line number.
(ecoff_build_symbols): Set ifilesym correctly. Set storage class
to small, undefined and/or readonly sections if appropriate.
Don't output symbol names containing \001 characters.
(ecoff_frob_file): Make sure at least one fdr is output.
* config/tc-mips.h: Define TC_MIPS.
* config/tc-mips.c (g_switch_value): New static variable.
(md_assemble): Set gp size of output BFD.
(gp_reference): New function; returns 1 if expression can be
accesssed via gp. Always returns 0 if not using ECOFF.
(macro_build): Convert BFD_RELOC_LO16 to BFD_RELOC_MIPS_GPREL if
possible.
(macro): Generate sequences using gp if possible.
(md_parse_option): Ignore -EL and -EB. Parse -G.
(md_apply_fix): Added BFD_RELOC_MIPS_GPREL to ignored case.
(s_change_sec): Handle .rdata and .sdata for ECOFF.
(s_extern): Mark symbol as external. Set ecoff_undefined field.
wasn't being stored into scnhdr.
* config/obj-coffbfd.h: Add prototype of s_get_segment.
* read.c (TC_START_LABEL): Default definition.
(read_a_source_file): Use TC_START_LABEL macro to work out
if a label has been seen.
dropping a space immediately following an identifier.
* expr.c, write.c: Rewrote assert expressions to not use multiple
lines; I don't think that can be done portably.
* config/tc-mips.c (macro): Use $AT if target register is zero in
load instruction, which it can be for a floating point load.
Also a bunch more changes to config/obj-ecoff.c, still in flux.
the section contents.
* config/obj-ecoff.h, config/obj-ecoff.c: Numerous changes to get
symbol table and values right.
* config/tc-mips.h (LOCAL_LABEL): If OBJ_ECOFF, any label starting
with $L is local.
* config/tc-mips.c (tc_gen_reloc): If OBJ_ECOFF, adjust the addend
by the section vma.
* config/z8k.mt (TARG_CPU_DEPENDENTS): The relevant file is
z8k-opc.h, not z8k.h.
* config/obj-ecoff.c, config/obj-ecoff.h: Preliminary ECOFF
support.
* config/tc-mips.h (TARGET_FORMAT): Define based on OBJ_AOUT vs.
OBJ_ECOFF as well as TARGET_BYTES_*_ENDIAN.
(struct loc, struct proc, struct file): Moved to tc-mips.c within
#ifndef OBJ_ECOFF block, since ECOFF uses different versions.
* config/tc-mips.c: Rearranged for ECOFF support. Added
prototypes for all static functions. Moved existing minimal
debugging format support info #ifndef OBJ_ECOFF blocks.
(macro_build_lui): Eliminated sign_extend argument, because ECOFF
does not support a non sign extended high 16 bits reloc. Adjusted
all callers accordingly.
(tc_get_register): Renamed from get_register, and made non-static.
* config/mips-big.mt, config/mips-lit.mt: New files. Define
TARGET_BYTES_BIG_ENDIAN and TARGET_BYTES_LITTLE_ENDIAN,
respectively.
* configure.in (mips-*-bsd*): Use gas_target mips-lit.
(mips-*-ultrix*, mips-*-irix*, mips-*-ecoff): New targets, using
obj_format ecoff and gas_target mips-lit or mips-big.
Misc optimizations, a couple of bugfixes.
Merged doc/ChangeLog.
Ralph Campbell's MIPS support.
And any other changes I've been putting in, save whitespace/comment adjustments.
* config/obj-coffbfd.c (fill_section): Don't set vaddr here.
(write_object_file): Set it here instead, so that fixup_segment
can see the correct value.
as soon as I check in as.h.
(s_lcomm): Likewise with bss_section.
(s_fill): Use memset, not bzero.
whitespace/comment changes.
deleted some "#ifdef DONTDEF" sections relating to GDB symtabs.
* app.c, config/tc-*.c: Don't include read.h, since it is already
included by as.h.
* These are based on patches from Minh Tran-le
<mtranle@paris.intellicorp.com>.
* configure.in (i[34]86-ibm-aix*): Accept i486 for host. Use
obj_format coffbfd and gas_target i386coff for target.
(i[34]86-*-isc*): New host (uses sysv).
* config/i386aix.mt: Removed (no longer used).
* config/mh-i386aix (RANLIB): Use true rather than /bin/true.
(MINUS_G): Removed.
(LDFLAGS): Added, defined as -shlib.
* config/te-i386aix.h (REVERSE_SORT_RELOCS): Undefine.
* config/te-sco386.h (LOCAL_LABEL): Don't define.
(DOT_LABEL_PREFIX): Define.
* expr.c (operand): If DOT_LABEL_PREFIX, use .L0\001 as a label
name rather than L0\001.
* read.c (s_lcomm): Make a frag in SEG_BSS rather than using
local_bss_counter.
* symbols.c, symbols.h (local_bss_counter): Removed.
* write.c (write_object_file): bss no longer uses
local_bss_counter. Pass correct data and bss size to
VMS_write_object_file.
* config/obj-vms.c (VMS_write_object_file): Accept bss size as
argument, rather than using local_bss_counter.
* config/tc-m88k.c (s_bss): Don't use local_bss_counter.
* config/tc-sparc.c (s_reserve): Don't use local_bss_counter.
* config/obj-coffbfd.c (had_lineno, had_reloc): Removed.
(size_section): Restored sanity check.
(do_relocs_for): Base section address on s_paddr rather than
computing it. Adjust a29k R_IHIHALF special case to account for
section paddr (used to require paddr to be zero). If there are no
reclos, set s_relptr to 0. Set relocation size in object_headers.
(fill_section): Always set s_vaddr here, removing
ZERO_BASED_SEGMENTS case. Force s_scnptr for bss to 0. Don't set
NOLOAD for i386 .bss, because it confuses the SVR3 native linker.
Set STYP_INFO for .comment.
(coff_header_append): Use object headers and H_{SET,GET}_* macros.
Make aouthdr writing depend on OBJ_COFF_OMIT_OPTIONAL_HEADER.
(crawl_symbols): Handle 8 character section name correctly. Use
H_{SET,GET}_* macros.
(do_linenos_for): Set lineno size in object_headers.
(write_object_file): Use H_{SET,GET}_* macros. Don't bother to
set s_vaddr here. If string_byte_count remains 4, set it back to
0, and only write strings out if there are some. Call
fill_section before do_relocs_for and do_linenos_for.
(obj_coff_section): Handle optional quoted second argument giving
section characteristics.
(obj_coff_bss): Added to handle .bss.
(obj_coff_ident): Added to handle .ident (puts string in .comment
section).
(obj_coff_lcomm): Put common symbols in .bss, not .data.
(fixup_mdeps): Change to segment. Call frag_wane after
md_convert_frag.
(fixup_segment): Explicitly check S_IS_COMMON before making 386
adjustment (already happened only for common symbols, but this is
clearer).
* config/obj-coffbfd.h (OBJ_COFF_OMIT_OPTIONAL_HEADER): Define.
* config/tc-i386.c (s_bss): Don't use if I386COFF.
(md_pseudo_table): Ignore .optim and .noopt.
(tc_coff_sizemachdep): New function.
* config/tc-i386.h (REVERSE_SORT_RELOCS): Undef, for SVR3
compatibility.
(LOCAL_LABEL): Removed definition.
(DOT_LABEL_PREFIX): Defined.
* listing.c: Call xmalloc, not malloc; don't declare malloc.
* Changes to support SCO 3.2v4:
* read.c (s_align_bytes, s_align_ptwo): If not SEG_DATA or
SEG_BSS, fill with NOP_OPCODE.
* config/i386coff.mt: Add opcode/i386.h to TARG_CPU_DEPENDENTS.
* config/obj-coffbfd.c (do_relocs_for): Increment addr even if not
using ZERO_BASED_SEGMENTS.
(fill_section): If ZERO_BASED_SEGMENTS, set segment addresses, but
never set segment address for SEG_E2 (.bss) and don't write out
SEG_E2 contents. Set .init and .fini sections to STYP_TEXT.
(obj_coff_endef): Don't merge labels or symbols awaiting forward
definitions, and don't merge tags with non-tags. Check for .bf
rather than just checking whether the second character is b and
the third character is f.
(obj_coff_val): gcc can generate values which we don't handle
correctly; discard information for now, since it only affects the
debugging information.
(tag_find_or_name): Don't insert tags in the symbol table.
(yank_symbols): Don't merge labels.
(write_object_file): Don't define SUB_SEGMENT_ALIGN if it is
already defined. Fill subsegments with NOP_OPCODE, not 0. Don't
set segment address if ZERO_BASED_SEGMENTS.
(obj_coff_section): Accept and ignore a trailing quoted string, as
used in AT&T i386 syntax.
(fixup_segment): Take segment as argument. On the i386, adjust PC
relative addends by the segment vaddr.
* tc-i386.h: Define SUB_SEGMENT_ALIGN.
* tc-a29k.h: Define ZERO_BASED_SEGMENTS.
* tc-i386.c: (i386_operand): If I386COFF, accept any segment type.
Deleted some unused code.
Fixed some declarations to use PARAMS macro.
Fixed up configure.in for new targets.
Some whitespace/comment fixes.
Merged config/ChangeLog.
