In the gdb.base/whatis-ptype-typedefs.exp test, if the test program
fails to compile, don't run the tests.
gdb/testsuite/ChangeLog:
* gdb.base/whatis-ptype-typedefs.exp: Don't run tests if we failed
to prepare.
(prepare): Return 0 on error, 1 on success.
The "gdb-add-index" script has been resurrected on:
commit caf26be91a
Author: Samuel Bronson <naesten@gmail.com>
Date: Fri Nov 15 16:09:33 2013 -0500
Resurrect gdb-add-index as a contrib script
However, for some reason (I couldn't find it in the archives), only
the script has been checked-in; the Makefile parts responsible for
installing it in the system were left out. This commit fixes that, by
also resurrecting the Makefile and documentation bits.
This commit is part of our effort to upstream the local Fedora GDB
changes. With this commit, we'll only carry a very small
Fedora-specific modification to the script.
gdb/ChangeLog:
2017-01-12 Tom Tromey <tom@tromey.com>
Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (install-only): Install gdb-add-index.
gdb/doc/ChangeLog:
2017-01-12 Tom Tromey <tom@tromey.com>
Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.texinfo (Index Files): Mention gdb-add-index.
(gdb-add-index man): New section.
* Makefile.in (gdb-add-index.1): New rule to generate manpage
from gdb.texinfo.
I had forgotten to convert the decimal output of 'ptype /o' to hex
(but still used a 0x prefix) for the KVE_PROTECTION constant defining
the offset of the 'kve_protection' field in the 'kinfo_vmentry'
structure. This resulted in garbage permissions for entries in 'info
proc mappings' for FreeBSD core dumps.
gdb/ChangeLog:
* fbsd-tdep.c (KVE_PROTECTION): Correct value.
This adds a testcase for the previous commit. The regression was
related to in-line step overs. The reason we didn't see it on native
x86-64/s390 GNU/Linux testing is that native debugging uses displaced
stepping by default (because native debugging defaults to "maint set
target-non-stop on"), unlike remote debugging.
So in order to trigger the bug with native debugging as well, the
testcase disables displaced stepping explicitly.
Also, instead of using watchpoints to trigger the regression, the
testcase uses a breakpoint at address 0, which should be more
portable.
gdb/testsuite/ChangeLog:
2018-01-12 Pedro Alves <palves@redhat.com>
* gdb.base/continue-after-aborted-step-over.c: New.
* gdb.base/continue-after-aborted-step-over.exp: New.
Since this commit --
Fix PR18360 - internal error when using "interrupt -a"
(https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=commit;h=c65d6b55)
-- the testsuite shows long delays on s390 with native-gdbserver when
executing certain tests, such as watchpoints.exp. These hangs have been
discussed before in the context of buildbot problems, see here:
https://sourceware.org/ml/gdb-patches/2017-12/msg00413.html
The problem can easily be triggered by stopping on a breakpoint, then
setting impossible watchpoints, and finally doing "continue". Then, after
having set the step-over state (in keep_going_pass_signal in infrun.c),
GDB tries to insert breakpoints and watchpoints into the inferior. This
fails, and the "continue" command is aborted. But the step-over state is
not cleared in this case, which causes future step-over attempts to be
skipped since GDB thinks that "we already have an in-line step-over
operation ongoing" (see start_step_over in infrun.c). Thus the next
"continue" just goes on to wait for events from the remote, which will
never occur.
The problem can also be reproduced on amd64 with native-gdbserver, using
the following change to watchpoints.exp:
-- >8 --
--- a/gdb/testsuite/gdb.base/watchpoints.exp
+++ b/gdb/testsuite/gdb.base/watchpoints.exp
@@ -61,2 +61,3 @@ with_test_prefix "before inferior start" {
gdb_test "watch ival3" ".*" ""
+ gdb_test "watch *(char \[256\] *) main"
-- >8 --
To fix the hang, this patch clears the step-over info when
insert_breakpoints has failed. Of course, with native-gdbserver the
watchpoints.exp test case still causes many FAILs on s390, because
gdbserver does not support watchpoints for that target. This is a
separate issue.
gdb/ChangeLog:
2018-01-12 Andreas Arnez <arnez@linux.vnet.ibm.com>
* infrun.c (keep_going_pass_signal): Clear step-over info when
insert_breakpoints fails.
When processing a section that is a member of a group, the group
that contains it is looked up using a linear search. The resulting
O(n^2) complexity causes significant performance issues when
dealing with object files with very many groups.
By remembering the index of the last found group and restarting
the next search from that index, the search instead becomes O(n)
in common cases.
* elf.c (setup_group): Optimize search for group by remembering
last found group and restarting search at that index.
* elf-bfd.h (struct elf_obj_tdata): Add group_search_offset field.
Occasionally I build an out-of-tree a.out target (m68k-amigaos). After
a system upgrade which included a newer compiler (clang 4) the build
produces warnings like this:
warning: macro expansion producing 'defined' has undefined behavior
[-Wexpansion-to-defined]
This is caused by the macro gas/config/aout_gnu.h:USE_EXTENDED_RELOC.
Since it is in a header file, the warning triggers for several files.
I am unsure what solution is preferable, thus I am suggesting two
patches:
a) keep the offending macro but define it explicitly to 0 and 1
b) replace the macro usage with its value where it is used.
Either patch removes the warning for clang. I did not check with a
recent GCC.
* gas/config/aout_gnu.h (USE_EXTENDED_RELOC): Explicitly
define to 0 and 1. Remove a dangling reference to "AMD 29000"
in a comment.
When I added this test I said I'd look at fixing more targets.
That hasn't happened yet, so xfail to tidy results.
* testsuite/ld-elf/elf.exp: xfail "pr22374 function pointer
initialization" for currently failing targets.
The default should be bfd_link_common_skip_none, as in the original
patch at https://sourceware.org/ml/binutils/2002-07/msg00717.html
* aoutx.h (aout_link_check_ar_symbols): Remove default and handle
bfd_link_common_skip_none in switch.
PowerPC64 has its own mark_dynamic_ref, which needs the same change as
made by d664fd41e1 to the generic ELF version. Some other targets
discard more than just .data, so allow for that too in expected ld
messages.
bfd/
PR ld/22649
* elf64-ppc.c (ppc64_elf_gc_mark_dynamic_ref): Ignore dynamic
references on forced local symbols.
ld/
PR ld/22649
* testsuite/ld-elf/pr22649.msg: Allow other messages.
* testsuite/ld-elf/shared.exp: Check that --gc-sections is
supported before running ld/22649 tests.
One of assertions in _bfd_mips_elf_final_link could be triggered by
a combination of input files and a linker script. This happens when
either the input doesn't contain .reginfo section or when this section
is oversized. This patch replaces the assertion with a more useful
error message.
* elfxx-mips.c (_bfd_mips_elf_final_link): Notify user when
.reginfo section has wrong size.
Currently we have no obvious way to revert the action of the "-z defs"
command line option. The "--unresolved-symbols=ignore-in-object-files"
does pretty much what is needed, but it is non-obvious and it also
touches the setting for reporting unresolved symbol references from
shared libraries. So I am proposing adding a "-z undefs" option to be
the inverse of "-z defs". (I thought that "-z nodefs" might be
confusing since it implies banning all definitions, rather than
allowing them).
In addition the description of the "-z defs" option in the linker
documentation is misleading in one place, where it says:
'defs'
Disallows undefined symbols in object files. Undefined
symbols in shared libraries are still allowed.
whereas later on it gets it right:
'-z defs'
Report unresolved symbol references from regular object files.
This is done even if the linker is creating a non-symbolic shared
library. The switch '--[no-]allow-shlib-undefined' controls the
behaviour for reporting unresolved references found in shared
libraries being linked in.
* emultempl/elf32.em (_handle_option): Add support for "-z undefs"
as the opposite of "-z defs".
* ld.texinfo: Document the new option. Update the description of
the -z defs option to make it clear that it does generate an error
if an undefined symbol reference is found in an object file whilst
creating a shared library.
* NEWS: Document this new feature.
Although they aren't passed to linker, we should get it right.
* testsuite/ld-elf/pr22393-2a.rd: Replace "-z textonly" with
"-z separate-code".
* testsuite/ld-elf/pr22393-2b.rd: Likewise.
* testsuite/ld-x86-64/pr22393-3a.rd: Likewise.
* testsuite/ld-x86-64/pr22393-3b.rd: Likewise.
When generating separate code LOAD segment, create a new LOAD segment
if the previous section contains text and the current section doesn't
or vice versa:
Elf file type is DYN (Shared object file)
Entry point 0x200020
There are 7 program headers, starting at offset 52
Program Headers:
Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg Align
LOAD 0x000000 0x00000000 0x00000000 0x00200 0x00200 R 0x200000
LOAD 0x200000 0x00200000 0x00200000 0x00036 0x00036 R E 0x200000
LOAD 0x400000 0x00400000 0x00400000 0x00064 0x00064 R 0x200000
LOAD 0x400f80 0x00600f80 0x00600f80 0x000a0 0x000a0 RW 0x200000
DYNAMIC 0x400f80 0x00600f80 0x00600f80 0x00080 0x00080 RW 0x4
GNU_STACK 0x000000 0x00000000 0x00000000 0x00000 0x00000 RW 0x10
GNU_RELRO 0x400f80 0x00600f80 0x00600f80 0x00080 0x00080 R 0x1
Section to Segment mapping:
Segment Sections...
00 .hash .gnu.hash .dynsym .dynstr .rela.plt
01 .plt .text
02 .rodata .eh_frame
03 .dynamic .got.plt
04 .dynamic
05
06 .dynamic
to prevent fetching or executing data in code pages as instructions.
Also don't put a writable section in a read-only segment if there is a
RELRO segment.
Since code segment is aligned and padded to the maximum page size on
disk, the minimum file size is bigger than the maximum page size which
is 2MB (0x200000):
-rwxr-xr-x 1 hjl hjl 4201932 Jan 10 10:41 libfoo.so
"-z max-page-size=0x1000" can be used to reduce the maximum page size to
4KB (0x1000):
-rwxr-xr-x 1 hjl hjl 15820 Jan 10 10:44 libfoo.so
PR ld/22393
* elf.c (_bfd_elf_map_sections_to_segments): When generating
separate code and read-only data LOAD segments, create a new
LOAD segment if the previous section contains text and the
current section doesn't or vice versa. Don't put a writable
section in a read-only segment if there is a RELRO segment.
The new "-z separate-code" option will generate separate code LOAD
segment which must be in wholly disjoint pages from any other data.
include/
PR ld/22393
* bfdlink.h (bfd_link_info): Add separate_code.
ld/
PR ld/22393
* NEWS: Mention "-z separate-code".
* emultempl/elf32.em (gld${EMULATION_NAME}_get_script): Get
builtin linker scripts and return linker scripts from disk for
"-z separate-code".
(gld${EMULATION_NAME}_handle_option): Handle "-z separate-code"
and "-z noseparate-code".
* genscripts.sh: Generate linker scripts for "-z separate-code".
(LD_FLAG): Set to *textonly for "-z separate-code".
* ld.texinfo: Document "-z separate-code".
* lexsup.c (elf_shlib_list_options): Add linker help messsages
for "-z separate-code" and "-z noseparate-code".
* scripttempl/elf.sc (SEPARATE_TEXT): New
(TEXT_SEGMENT_ALIGN): Likewise.
Use ${TEXT_SEGMENT_ALIGN} to align and pad text segment to
${MAXPAGESIZE}.
Trying to use gdb_compile_shlib with the shlib= option to build a shared
library that depends on another shared library does not work as of
today. See:
https://sourceware.org/ml/gdb-patches/2017-10/msg00733.html
The problem is that building the lib is done in two steps, compilation
(.c -> .o) and linking (.o -> .so) and the shlib= options are passed to
both steps. When compiling the object file (.o), it results in gcc
complaining:
gcc: warning: .../solib-vanish-lib2.so: linker input file unused because linking not done
The first solution I came up with was to filter the options inside
gdb_compile_shlib to remove the shlib= options from the options we pass
when compiling the .o file.
I then thought it would be simpler to ignore the shlib= options in
gdb_compile when not building an executable (the executable category
includes the shared libraries). For other compilation types (object
file, preprocess and generate assembly), it doesn't make sense to add
shared libraries to the source file list.
Regtested on the buildbot.
gdb/testsuite/ChangeLog:
* lib/gdb.exp (gdb_compile): Ignore shlib= and shlib_load
options when not creating an executable.
We should ignore dynamic references on forced local symbols during
garbage collection since they can never be referenced dynamically.
bfd/
PR ld/22649
* elflink.c (bfd_elf_gc_mark_dynamic_ref_symbol): Ignore dynamic
references on forced local symbols.
ld/
PR ld/22649
* testsuite/ld-elf/pr22649-1.s: New file.
* testsuite/ld-elf/pr22649-2a.s: Likewise.
* testsuite/ld-elf/pr22649-2b.s: Likewise.
* testsuite/ld-elf/pr22649.msg: Likewise.
* testsuite/ld-elf/shared.exp: Run ld/22649 tests.
As Maciej reported at
<https://sourceware.org/ml/gdb-patches/2017-12/msg00212.html>, this
commit:
commit d930703d68
Date: Thu Nov 16 18:44:43 2017 +0000
Subject: Don't ever Quit out of resume
caused regressions on software single-set targets, specifically:
FAIL: gdb.base/breakpoint-in-ro-region.exp: always-inserted off: auto-hw off: single-step breakpoint is not left behind
FAIL: gdb.base/breakpoint-in-ro-region.exp: always-inserted off: auto-hw on: single-step breakpoint is not left behind
FAIL: gdb.base/breakpoint-in-ro-region.exp: always-inserted on: auto-hw off: step in ro region (cannot insert hw break)
FAIL: gdb.base/breakpoint-in-ro-region.exp: always-inserted on: auto-hw off: single-step breakpoint is not left behind
FAIL: gdb.base/breakpoint-in-ro-region.exp: always-inserted on: auto-hw on: single-step breakpoint is not left behind
and indeed detailed logs indicate a breakpoint is left lingering, e.g.:
(gdb) PASS: gdb.base/breakpoint-in-ro-region.exp: always-inserted off: auto-hw off: step in ro region (cannot insert sw break)
maint info breakpoints 0
Num Type Disp Enb Address What
0 sw single-step keep y 0x00400774 in main at [...]/gdb/testsuite/gdb.base/breakpoint-in-ro-region.c:24 inf 1 thread 1
stop only in thread 1
(gdb) FAIL: gdb.base/breakpoint-in-ro-region.exp: always-inserted off: auto-hw off: single-step breakpoint is not left behind
vs:
(gdb) PASS: gdb.base/breakpoint-in-ro-region.exp: always-inserted off: auto-hw off: step in ro region (cannot insert sw break)
maint info breakpoints 0
No breakpoint or watchpoint matching '0'.
(gdb) PASS: gdb.base/breakpoint-in-ro-region.exp: always-inserted off: auto-hw off: single-step breakpoint is not left behind
as at commit d930703d68ae^.
Before commit d930703d68, we had a cleanup installed in 'resume'
that would delete single-step breakpoints on error:
/* Resuming. */
/* Things to clean up if we QUIT out of resume (). */
static void
resume_cleanups (void *ignore)
{
if (!ptid_equal (inferior_ptid, null_ptid))
delete_single_step_breakpoints (inferior_thread ());
normal_stop ();
}
That whole function was removed by d930703d68 mainly to eliminate
the normal_stop call:
~~~~
Note that the exception called from within resume ends up calling
normal_stop via resume_cleanups. That's very borked though, because
normal_stop is going to re-handle whatever was the last reported
event, possibly even re-running a hook stop...
~~~~
But as the regression shows, removing resume_cleanups completely went
a bit too far, as the delete_single_step_breakpoints call is still
necessary.
So fix the regression by reinstating the
delete_single_step_breakpoints call on error. However, since we're
trying to eliminate cleanups, restore it in a different form (using
TRY/CATCH).
Tested on x86-64 GNU/Linux both top of master and on top of a series
that implements software single-step on x86.
gdb/ChangeLog:
2018-01-11 Pedro Alves <palves@redhat.com>
PR gdb/22583
* infrun.c (resume): Rename to ...
(resume_1): ... this.
(resume): Reimplement as wrapper around resume_1.
We must keep all PREINIT_ARRAY, INIT_ARRAY as well as FINI_ARRAY sections
for ld -r --gc-sections.
bfd/
PR ld/22677
* elflink.c (bfd_elf_gc_sections): Keep all PREINIT_ARRAY,
INIT_ARRAY as well as FINI_ARRAY sections for ld -r --gc-sections.
ld/
PR ld/22677
* scripttempl/elf.sc (PREINIT_ARRAY): New.
Don't add .preinit_array for ld -r.
* testsuite/ld-elf/pr22677.d: New file.
* testsuite/ld-elf/pr22677.s: Likewise.
Previous commit removed all uses of the defsym field within the linker
expression union. This commit cleans up the now redundant state.
ld/ChangeLog:
* ldexp.h (union etree_union): Remove defsym field.
* ldexp.c (exp_assop): Remove defsym parameter, and use of defsym
parameter.
(exp_assign): Remove passing of defsym parameter.
(exp_defsym): Likewise.
(exp_provide): Likewise.
In a linker script, a sequence like this:
foo = ADDR (.some_section);
bar = foo;
PROVIDE (foo = 0);
will result in 'bar = ADDR (.some_section)' and 'foo = 0', which seems
like incorrect behaviour, foo is clearly defined elsewhere, and so the
PROVIDE should not trigger.
The problem is that an expression like this:
foo = ADDR (.some_section);
can't be evaluated until a late phase of the linker, due to the need
for the section '.some_section' to have been placed, then the PROVIDE
was being marked as being used during an earlier phase. At the end of
the link, both lines:
foo = ADDR (.some_section);
PROVIDE (foo = 0);
are active, and this causes the final value of 'foo' to be 0.
The solution proposed in this commit is that, during earlier phases of
the linker, when we see the expression 'foo = ADDR (.some_section);',
instead of ignoring the expression, we create a "fake" definition of
'foo'. The existence of this "fake" definition prevents the PROVIDE
from being marked used, and during the final phase the real definition
of 'foo' will replace the "fake" definition.
The new test provide-6 covers the exact case described above. The
provide-7 test is similar to the above, but using constant
expressions, this was never broken, but is added here to increase
coverage.
The provide-8 case also didn't fail before this commit, but I did
manage to break this case during development of this patch. This case
was only covered by a mmix test before, so I've added this here to
increase coverage.
ld/ChangeLog:
* ldexp.c (exp_fold_tree_1): Rework condition underwhich provide
nodes are ignored in the tree walk, and move the location at which
we change provide nodes into provided nodes.
(exp_init_os): Add etree_provided.
* testsuite/ld-scripts/provide-6.d: New file.
* testsuite/ld-scripts/provide-6.t: New file.
* testsuite/ld-scripts/provide-7.d: New file.
* testsuite/ld-scripts/provide-7.t: New file.
* testsuite/ld-scripts/provide-8.d: New file.
* testsuite/ld-scripts/provide-8.t: New file.
Find the ld-script/provide-*.d tests using a wildcard, then run them in
a loop. This will make it easier to add more tests in the future. Some
associated clean up is required.
ld/ChangeLog:
* testsuite/ld-scripts/provide-3.d: Add xfail directive.
* testsuite/ld-scripts/provide-4.d: Use new map file name.
* testsuite/ld-scripts/provide-5.d: Use new map file name.
* testsuite/ld-scripts/provide-4-map.d: Renamed to...
* testsuite/ld-scripts/provide-4.map: ...this.
* testsuite/ld-scripts/provide-5-map.d: Renamed to...
* testsuite/ld-scripts/provide-5.map: ...this.
* testsuite/ld-scripts/provide.exp: Move xfail into provide-3.d
file, and run tests in a loop.
Currently when recording a PROVIDE statement in a linker map file we
display something like:
PROVIDE (SYMBOL, VALUE)
However, in a linker script we write these statements like this:
PROVIDE (SYMBOL = VALUE);
This commit changes the output in the map file to be closer to linker
script format, the map file now contains:
PROVIDE (SYMBOL = VALUE)
The ';' is still missing from the end, but map files are not intended
to be valid linker script input, so adding the ';' just seems like
clutter.
ld/ChangeLog:
* ldexp.c (exp_print_tree): Use '=' instead of ',' when printing
PROVIDE statements.
* testsuite/ld-scripts/provide-4.map: Update expected output.
* testsuite/ld-scripts/provide-5.map: Likewise.
elf.sc has
if test -n "${RODATA_ADDR}"; then
RODATA_ADDR="\
SEGMENT_START(\"rodata-segment\", ${RODATA_ADDR}) + SIZEOF_HEADERS"
else
RODATA_ADDR="ALIGN(${SEGMENT_SIZE}) + (. & (${MAXPAGESIZE} - 1))"
^^^^^^^^^^ Set RODATA_ADDR
RODATA_ADDR="SEGMENT_START(\"rodata-segment\", ${RODATA_ADDR})"
^^^^^^^^^^ Set RODATA_ADDR with ${RODATA_ADDR}
fi
if test -n "${SHLIB_RODATA_ADDR}"; then
SHLIB_RODATA_ADDR="\
SEGMENT_START(\"rodata-segment\", ${SHLIB_RODATA_ADDR}) + SIZEOF_HEADERS"
else
SHLIB_RODATA_ADDR="SEGMENT_START(\"rodata-segment\", ${SHLIB_RODATA_ADDR})"
^^^^^^^^^^ Set SHLIB_RODATA_ADDR
SHLIB_RODATA_ADDR="ALIGN(${SEGMENT_SIZE}) + (. & (${MAXPAGESIZE} - 1))"
^^^^^^^^^^ Override SHLIB_RODATA_ADDR
fi
The order should be:
if test -n "${SHLIB_RODATA_ADDR}"; then
SHLIB_RODATA_ADDR="\
SEGMENT_START(\"rodata-segment\", ${SHLIB_RODATA_ADDR}) + SIZEOF_HEADERS"
else
SHLIB_RODATA_ADDR="ALIGN(${SEGMENT_SIZE}) + (. & (${MAXPAGESIZE} - 1))"
SHLIB_RODATA_ADDR="SEGMENT_START(\"rodata-segment\", ${SHLIB_RODATA_ADDR})"
fi
PR ld/22696
* scripttempl/elf.sc: Fix the order of SHLIB_RODATA_ADDR.
With old makeinfo (version 4.13) the changes introduced in
commit 2d97a5d9d3
Author: John Baldwin <jhb@FreeBSD.org>
Document support for 'info proc' on FreeBSD.
fail to build.
gdb/doc/ChangeLog:
* gdb.texinfo (pwd): Fix whitespace.
At <https://sourceware.org/ml/gdb-patches/2017-12/msg00285.html>,
Maciej reported that commit:
commit 5cd63fda03
Date: Wed Oct 4 18:21:10 2017 +0100
Subject: Fix "Remote 'g' packet reply is too long" problems with multiple inferiors
made GDB stop working with older stubs. Any attempt to continue
execution after the initial connection fails with:
[...]
Process .../gdb/testsuite/outputs/gdb.base/advance/advance created; pid = 2670
Listening on port 2346
target remote [...]:2346
Remote debugging using [...]:2346
Reading symbols from .../lib64/ld.so.1...done.
[Switching to Thread <main>]
(gdb) continue
Cannot execute this command without a live selected thread.
(gdb)
The problem is:
(gdb) c
Cannot execute this command without a live selected thread.
(gdb) info threads
Id Target Id Frame
1 Thread 14917 0x00007f341cd98ed0 in _start () from /lib64/ld-linux-x86-64.so.2
The current thread <Thread ID 2> has terminated. See `help thread'.
^^^^^^^^^^^
(gdb)
Note, thread _2_. There's really only one thread in the inferior
(it's still at the entry point), but still GDB added a bogus second
thread.
The reason GDB started adding a second thread after 5cd63fda03 is
this hunk:
+ if (event->ptid == null_ptid)
+ {
+ const char *thr = strstr (p1 + 1, ";thread:");
+ if (thr != NULL)
+ event->ptid = read_ptid (thr + strlen (";thread:"),
+ NULL);
+ else
+ event->ptid = magic_null_ptid;
+ }
Note the else branch that falls back to magic_null_ptid. We reach
that when we process the initial stop reply sent back in response to
the the "?" (status) packet early in the connection setup:
Sending packet: $?#3f...Ack
Packet received: T0506:0000000000000000;07:40a510f4fd7f0000;10:d0fe1201577f0000;
And note that that response does not include a ";thread:XXX" part.
This stop reply is processed after listing threads with qfThreadInfo /
qsThreadInfo :
Sending packet: $qfThreadInfo#bb...Ack
Packet received: m3915
Sending packet: $qsThreadInfo#c8...Ack
Packet received: l
meaning, when we process that stop reply, we treat the event as coming
from a thread with ptid == magic_null_ptid, which is not yet in the
thread list, so we add it then:
(top-gdb) p ptid
$1 = {m_pid = 42000, m_lwp = -1, m_tid = 1}
(top-gdb) bt
#0 0x0000000000840a8c in add_thread_silent(ptid_t) (ptid=...) at src/gdb/thread.c:269
#1 0x00000000007ad61d in remote_add_thread(ptid_t, int, int) (ptid=..., running=0, executing=0)
at src/gdb/remote.c:1838
#2 0x00000000007ad8de in remote_notice_new_inferior(ptid_t, int) (currthread=..., executing=0)
at src/gdb/remote.c:1921
#3 0x00000000007b758b in process_stop_reply(stop_reply*, target_waitstatus*) (stop_reply=0x1158860, status=0x7fffffffcc00)
at src/gdb/remote.c:7217
#4 0x00000000007b7a38 in remote_wait_as(ptid_t, target_waitstatus*, int) (ptid=..., status=0x7fffffffcc00, options=0)
at src/gdb/remote.c:7380
#5 0x00000000007b7cd1 in remote_wait(target_ops*, ptid_t, target_waitstatus*, int) (ops=0x102fac0 <remote_ops>, ptid=..., status=0x7fffffffcc00, options=0) at src/gdb/remote.c:7446
#6 0x000000000081587b in delegate_wait(target_ops*, ptid_t, target_waitstatus*, int) (self=0x102fac0 <remote_ops>, arg1=..., arg2=0x7fffffffcc00, arg3=0) at src/gdb/target-delegates.c:138
#7 0x0000000000827d77 in target_wait(ptid_t, target_waitstatus*, int) (ptid=..., status=0x7fffffffcc00, options=0)
at src/gdb/target.c:2179
#8 0x0000000000715fda in do_target_wait(ptid_t, target_waitstatus*, int) (ptid=..., status=0x7fffffffcc00, options=0)
at src/gdb/infrun.c:3589
#9 0x0000000000716351 in wait_for_inferior() () at src/gdb/infrun.c:3707
#10 0x0000000000715435 in start_remote(int) (from_tty=1) at src/gdb/infrun.c:3212
things go downhill from this.
We don't see the problem with current master gdbserver, because that
version always sends the ";thread:" part in the initial stop reply:
Sending packet: $?#3f...Packet received: T0506:0000000000000000;07:a0d4ffffff7f0000;10:d05eddf7ff7f0000;thread:p3cea.3cea;core:3;
Years ago I had added a "--disable-packet=" command line option to
gdbserver which comes in handy for testing this, since the existing
"--disable-packet=Tthread" precisely makes gdbserver not send that
";thread:" part in stop replies. The testcase added by this commit
emulates old gdbserver making use of that.
I've compared a testrun at 5cd63fda035d^ (before regression) with
'current master+patch', against old gdbserver at f8b73d13b7ca^. I
hacked out --once, and "monitor exit" to be able to test. The results
are a bit too unstable to tell accurately, but it looked like there
were no regressions. Maciej confirmed this worked for him as well.
No regressions on master (against master gdbserver).
gdb/ChangeLog:
2018-01-11 Pedro Alves <palves@redhat.com>
PR remote/22597
* remote.c (remote_parse_stop_reply): Default to the last-set
general thread instead of to 'magic_null_ptid'.
gdb/testsuite/ChangeLog:
2018-01-11 Pedro Alves <palves@redhat.com>
PR remote/22597
* gdb.server/stop-reply-no-thread.c: New file.
* gdb.server/stop-reply-no-thread.exp: New file.
Rename language_get_symbol_name_matcher -> get_symbol_name_matcher,
since the function is no longer a straight "language method".
gdb/ChangeLog:
2018-01-10 Pedro Alves <palves@redhat.com>
* language.h (language_get_symbol_name_matcher): Rename ...
(get_symbol_name_matcher): ... this.
* language.c (language_get_symbol_name_matcher): Ditto.
* dictionary.c, linespec.c, minsyms.c, psymtab.c, symtab.c: All
callers adjusted.
A previous patch fixed verbatim matching in the lookup at the minimal
symbol level, but we should also be finding that same symbol through
the partial/full symtab search.
For example, this is what happens if we use "print" instead of
"break":
(gdb) p <MixedCaseFunc>
$1 = {<text variable, no debug info>} 0x4024dc <MixedCaseFunc>
Before the C++ wildmatching series, GDB knows that MixedCaseFunc is a
function without parameters, and the expression above means calling
it. If you try it before having started the inferior, you'd get the
following (expected) error:
(gdb) print <MixedCaseFunc>
You can't do that without a process to debug.
The main idea behind making the name matcher be determined by the
symbol's language is so that C++ (etc.) wildmatching in linespecs
works even if the current language is not C++, as e.g., when you step
through C or assembly code.
Ada's verbatim matching syntax however ("<...>") isn't quite the same.
It is more a property of the current language than of a particular
symbol's language. We want to support this syntax when debugging an
Ada program, but it's reason of existence is to find non-Ada symbols.
This suggests going back to enabling it depending on current language
instead of language of the symbol being matched.
I'm not entirely happy with the "current_language" reference (though I
think that it's harmless). I think we could try storing the current
language in the lookup_name_info object, and then convert a bunch of
functions more to pass around lookup_name_info objects instead of
"const char *" names. I.e., build the lookup_name_info higher up.
I'm not sure about that, I'll have to think more about it. Maybe
something different will be better. Meanwhile, this gets us going.
I've extended the testcase to also exercise a no-debug-info function,
for extra coverage of the minsyms-only paths.
gdb/ChangeLog:
2018-01-10 Pedro Alves <palves@redhat.com>
PR gdb/22670
* dwarf2read.c
(gdb_index_symbol_name_matcher::gdb_index_symbol_name_matcher):
Adjust to use language_get_symbol_name_matcher instead of
language_defn::la_get_symbol_name_matcher.
* language.c (language_get_symbol_name_matcher): If in Ada mode
and the lookup name is a verbatim match, return Ada's matcher.
* language.h (language_get_symbol_name_matcher): Adjust comment.
(ada_lookup_name_info::verbatim_p):: New method.
gdb/testsuite/ChangeLog:
2018-01-10 Pedro Alves <palves@redhat.com>
PR gdb/22670
* gdb.ada/bp_c_mixed_case.exp: Add intro comment. Test printing C
functions too. Test setting breakpoints and printing C functions
with no debug info too.
* gdb.ada/bp_c_mixed_case/qux.c: New file.
This patch fixes the regression covered by the test added by:
commit 344420da6b
Date: Thu Jan 4 03:30:37 2018 -0500
Subject: Add "complete break ada" test to gdb.ada/complete.exp
The regression had been introduced by:
commit b5ec771e60
Date: Wed Nov 8 14:22:32 2017 +0000
Subject: Introduce lookup_name_info and generalize Ada's FULL/WILD name matching
The gist of it is that linespec completion in Ada mode is generating
additional matches that should not appear in the match list
(internally generated symbols, or symbols that should be enclosed
between "<...>"). These extraneous entries have uppercase characters, such as:
break ada__stringsS
break ada__strings__R11s
[etc]
These matches come from minimal symbols. The problem is that Ada
minsyms end up with no language set (language_auto), and thus we end
up using the generic symbol name matcher for those instead of Ada's.
We already had a special case for in compare_symbol_name to handle
this, but it was limited to expressions, while the case at hand is
completing a linespec. Fix this by applying the special case to
linespec completion as well. I.e., remove the EXPRESSION check from
compare_symbol_name. That alone turns out to not be sufficient still
-- GDB would still show a couple entries that shouldn't be there:
~~
break ada__exceptions__exception_data__append_info_exception_name__2Xn
break ada__exceptions__exception_data__exception_name_length__2Xn
~~
The reason is that these minimal symbols end up with their language
set to language_cplus / C++, because those encoded names manage to
demangle successfully as C++ symbols (using an old C++ mangling
scheme):
$ echo ada__exceptions__exception_data__append_info_exception_name__2Xn | c++filt
Xn::ada__exceptions__exception_data__append_info_exception_name(void)
It's unfortunate that Ada's encoding scheme doesn't start with some
unique prefix like "_Z" in the C++ Itanium ABI mangling scheme. For
now, paper over that by treating C++ minsyms as Ada minsyms.
gdb/ChangeLog:
2018-01-10 Pedro Alves <palves@redhat.com>
PR gdb/22670
* ada-lang.c (ada_collect_symbol_completion_matches): If the
minsym's language is language_auto or language_cplus, pass down
language_ada instead.
* symtab.c (compare_symbol_name): Don't frob symbol language here.
gdb/testsuite/ChangeLog:
2018-01-10 Pedro Alves <palves@redhat.com>
PR gdb/22670
* gdb.ada/complete.exp ("complete break ada"): Replace kfail with
a fail.
The problem here is that we are using the user-provided lookup name
literally for name comparisons. I.e., "<MixedCase>" with the "<>"s
included.
This commit fixes the minsym lookup case. psymbol/symbol lookup will
be fixed in a follow up.
In the minsym case, we're using using the user-provided lookup name
literally for linkage name comparisons. That obviously can't work
since the "<>" are not really part of the linkage name.
The original idea was that we'd use the symbol's language to select
the right symbol name matching algorithm, but that doesn't work for
Ada because it's not really possible to unambiguously tell from the
linkage name alone whether we're dealing with Ada symbols, so Ada
minsyms end up with no language set, or sometimes C++ set.
So fix this by treating Ada mode specially when determining the
linkage name to match against.
gdb/ChangeLog:
2018-01-10 Pedro Alves <palves@redhat.com>
PR gdb/22670
* minsyms.c (linkage_name_str): New function.
(iterate_over_minimal_symbols): Use it.
gdb/testsuite/ChangeLog:
2018-01-10 Pedro Alves <palves@redhat.com>
PR gdb/22670
* gdb.ada/bp_c_mixed_case.exp: Remove setup_kfail calls.
. * config-ml.in: Sync with gcc sources.
* config.guess: Likewise.
* config.sub: Likewise.
* configure.ac: Likewise.
* configure: Regenerate.
config * Sync with GCC sources:
2017-11-14 Boris Kolpackov <boris@codesynthesis.com>
* gcc-plugin.m4: Add support for MinGW.
2017-11-17 Igor Tsimbalist <igor.v.tsimbalist@intel.com>
* cet.m4: New file.
2017-11-15 Alexandre Oliva <aoliva@redhat.com>
* bootstrap-debug-lean.mk (do-compare): Use the
contrib/compare-debug script.
2017-10-24 H.J. Lu <hongjiu.lu@intel.com>
* bootstrap-cet.mk: New file.
2017-06-19 Martin Liska <mliska@suse.cz>
* bootstrap-lto-noplugin.mk: Enable -flto in all PGO stages.
* bootstrap-lto.mk: Likewise.
2017-06-03 Eric Botcazou <ebotcazou@adacore.com>
* mt-android: New file.
2017-02-13 Richard Biener <rguenther@suse.de>
* isl.m4: Remove support for ISL 0.14.
2017-01-19 Uros Bizjak <ubizjak@gmail.com>
PR target/78478
* ax_check_define.m4: New file.
2017-01-17 Jakub Jelinek <jakub@redhat.com>
PR other/79046
* acx.m4 (GCC_BASE_VER): New m4 function.
(ACX_TOOL_DIRS): Require GCC_BASE_VER, for
--with-gcc-major-version-only use just major number from BASE-VER.
2017-01-06 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
PR go/78978
* hwcaps.m4 (GCC_CHECK_ASSEMBLER_HWCAP): New macro.
2017-01-02 Richard Biener <rguenther@suse.de>
PR lto/83452
* simple-object-elf.c (simple_object_elf_copy_lto_debug_section):
Do not use UNDEF locals for removed symbols but instead just
define them in the first prevailing section and with no name.
Use the same gnu_lto_v1 name for all removed globals we promote to
WEAK UNDEFs so hpux can use a stub to provide this symbol. Clear
sh_info and sh_link in removed sections.
2017-10-30 Richard Biener <rguenther@suse.de>
PR lto/82757
* simple-object-elf.c (simple_object_elf_copy_lto_debug_sections):
Strip two leading _s from the __gnu_lto_* symbols.
2017-10-24 Alan Modra <amodra@gmail.com>
PR lto/82687
PR lto/82575
* simple-object-elf.c (simple_object_elf_copy_lto_debug_sections):
Only make __gnu_lto symbols hidden.
2017-10-20 Alan Modra <amodra@gmail.com>
PR lto/82575
* simple-object-elf.c (simple_object_elf_copy_lto_debug_sections):
Make discarded non-local symbols weak and hidden.
2017-10-18 Jakub Jelinek <jakub@redhat.com>
PR lto/82598
* simple-object.c (handle_lto_debug_sections): Copy over also
.note.GNU-stack section with unchanged name.
* simple-object-elf.c (SHF_EXECINSTR): Define.
(simple_object_elf_copy_lto_debug_section): Drop SHF_EXECINSTR bit
on .note.GNU-stack section.
2017-09-25 Nathan Sidwell <nathan@acm.org>
PR demangler/82195
* cp-demangle.c (d_encoding): Strip return type when name is a
LOCAL_NAME.
(d_local_name): Strip return type of enclosing TYPED_NAME.
* testsuite/demangle-expected: Add and adjust tests.
2017-09-21 Nathan Sidwell <nathan@acm.org>
PR demangler/82195
* cp-demangle.c (d_name): Revert addition of 'toplevel' parm.
(has_return_type): Recurse for DEMANGLE_COMPONENT_LOCAL_NAME.
(d_encoding): Revert d_name change. Use is_fnqual_component_type
to strip modifiers that do not belong.
(d_special_name, d_class_enum_type): Revert d_name call change.
(d_expresion_1): Commonize DEMANGLE_COMPONENT_UNARY building.
(d_local_name): Revert parsing of a function type.
(d_print_comp_inner): An inner LOCAL_NAME might contain a
TEMPLATE.
* testsuite/demangle-expected: Add & adjust tests
Just like their packed counterparts the memory operand is always 16
bytes wide, and the Disp8 scaling is the same for all of them. (As a
side note: I'm also surprised by there being AVX512VL variants of
these as well as the AVX512_4VNNIW ones - the SDM doesn't define any
such.)
Adjust the test cases also for the packed forms to actually live up to
their promise of testing correct Disp8 encoding.
gas/
* testsuite/gas/riscv/auipc-x0.d: New.
* testsuite/gas/riscv/auipc-x0.s: New.
opcodes/
* riscv-dis.c (maybe_print_address): If base_reg is zero,
then the hi_addr value is zero.
