PR 29135
* nm.c (non_weak): New variable.
(filter_symbols): When non-weak is true, ignore weak symbols.
(long_options): Add --no-weak.
(usage): Mention --no-weak.
(main): Handle -W/--no-weak.
* doc/binutils.texi: Document new feature.
* NEWS: Mention the new feature.
* testsuite/binutils-all/nm.exp: Add test of new feature.
* testsuite/binutils-all/no-weak.s: New test source file.
This commit adds the _option_ of having disassembler output syntax
highlighted in objdump. This option is _off_ by default. The new
command line options are:
--disassembler-color=off # The default.
--disassembler-color=color
--disassembler-color=extended-color
I have implemented two colour modes, using the same option names as we
use of --visualize-jumps, a basic 8-color mode ("color"), and an
extended 8bit color mode ("extended-color").
The syntax highlighting requires that each targets disassembler be
updated; each time the disassembler produces some output we now pass
through an additional parameter indicating what style should be
applied to the text.
As updating all target disassemblers is a large task, the old API is
maintained. And so, a user of the disassembler (i.e. objdump, gdb)
must provide two functions, the current non-styled print function, and
a new, styled print function.
I don't currently have a plan for converting every single target
disassembler, my hope is that interested folk will update the
disassemblers they are interested in. But it is possible some might
never get updated.
In this initial series I intend to convert the RISC-V disassembler
completely, and also do a partial conversion of the x86 disassembler.
Hopefully having the x86 disassembler at least partial converted will
allow more people to try this out easily and provide feedback.
In this commit I have focused on objdump. The changes to GDB at this
point are the bare minimum required to get things compiling, GDB makes
no use of the styling information to provide any colors, that will
come later, if this commit is accepted.
This first commit in the series doesn't convert any target
disassemblers at all (the next two commits will update some targets),
so after this commit, the only color you will see in the disassembler
output, is that produced from objdump itself, e.g. from
objdump_print_addr_with_sym, where we print an address and a symbol
name, these are now printed with styling information, and so will have
colors applied (if the option is on).
Finally, my ability to pick "good" colors is ... well, terrible. I'm
in no way committed to the colors I've picked here, so I encourage
people to suggest new colors, or wait for this commit to land, and
then patch the choice of colors.
I do have an idea about using possibly an environment variable to
allow the objdump colors to be customised, but I haven't done anything
like that in this commit, the color choices are just fixed in the code
for now.
binutils/ChangeLog:
* NEWS: Mention new feature.
* doc/binutils.texi (objdump): Describe --disassembler-color
option.
* objdump.c (disassembler_color): New global.
(disassembler_extended_color): Likewise.
(disassembler_in_comment): Likewise.
(usage): Mention --disassembler-color option.
(long_options): Add --disassembler-color option.
(objdump_print_value): Use fprintf_styled_func instead of
fprintf_func.
(objdump_print_symname): Likewise.
(objdump_print_addr_with_sym): Likewise.
(objdump_color_for_disassembler_style): New function.
(objdump_styled_sprintf): New function.
(fprintf_styled): New function.
(disassemble_jumps): Use disassemble_set_printf, and reset
disassembler_in_comment.
(null_styled_print): New function.
(disassemble_bytes): Use disassemble_set_printf, and reset
disassembler_in_comment.
(disassemble_data): Update init_disassemble_info call.
(main): Handle --disassembler-color option.
include/ChangeLog:
* dis-asm.h (enum disassembler_style): New enum.
(struct disassemble_info): Add fprintf_styled_func field, and
created_styled_output field.
(disassemble_set_printf): Declare.
(init_disassemble_info): Add additional parameter.
(INIT_DISASSEMBLE_INFO): Add additional parameter.
opcodes/ChangeLog:
* dis-init.c (init_disassemble_info): Take extra parameter,
initialize the new fprintf_styled_func and created_styled_output
fields.
* disassembler.c (disassemble_set_printf): New function definition.
* dwarf.c (use_debuginfod): New variable. Set to 1.
(load_separate_debug_info): Only call
debuginfod_fetch_separate_debug_info is use_debuginfod is true.
(dwarf_select_sections_by_names): Add do-not-use-debuginfod and
use-debuginfod options.
(dwarf_select_sections_by_letters): Add D and E options.
* dwarf.h (use_debuginfod): New extern.
* objdump.c (usage): Mention the new options.
* readelf.c (usage): Likewise.
* doc/binutils.texi: Document the new options.
* doc/debug-options.texi: Describe the new options.
* NEWS: Mention the new feature.
* testsuite/binutils-all/debuginfod.exp: Add tests of the new
options.
In many ar implementations (FreeBSD, elfutils, etc), -T has the X/Open
System Interface specified semantics. Therefore -T for thin archives is
not recommended for portability. -T is deprecated without diagnostics.
PR binutils/28759
* ar.c (long_options): Add --thin.
(usage) Add --thin. Deprecate -T without diagnostics.
* doc/binutils.texi: Add doc.
* NEWS: Mention --thin.
* binutils/testsuite/binutils-all/ar.exp: Add tests.
The result of running etc/update-copyright.py --this-year, fixing all
the files whose mode is changed by the script, plus a build with
--enable-maintainer-mode --enable-cgen-maint=yes, then checking
out */po/*.pot which we don't update frequently.
The copy of cgen was with commit d1dd5fcc38ead reverted as that commit
breaks building of bfp opcodes files.
This adds support for efi-*-aarch64 by virtue of adding a new PEI target
pei-aarch64-little. This is not a full target and only exists to support EFI
at this time.
This means that this target does not support relocation processing and is mostly
a container format. This format has been added to elf based aarch64 targets
such that efi images can be made natively on Linux.
However this target is not valid for use with gas but only with objcopy.
With these changes the resulting file is recognized as an efi image by
third party tools:
> pecli info hello.efi
Metadata
================================================================================
MD5: 598c32a778b0f0deebe977fef8578c4e
SHA1: 4580121edd5cb4dc40f51b28f171fd15250df84c
SHA256: 3154bd7cf42433d1c957f6bf55a17ad8c57ed41b29df2d485703349fd6ff1d5c
Imphash:
Size: 47561 bytes
Type: PE32+ executable (EFI application) (stripped to external PDB), for MS Windows
Compile Time: 1970-01-01 00:00:00 (UTC - 0x0 )
Entry point: 0x2000 (section .text)
Sections
================================================================================
Name RWX VirtSize VirtAddr RawAddr RawSize Entropy md5
.text R-X 0x5bb0 0x2000 0x400 0x5c00 6.39 551fbc264256a3f387de8a891500ae0d
.reloc R-- 0xc 0x8000 0x6000 0x200 0.02 0c45f6d812d079821c1d54c09ab89e1d
.data RW- 0x1d88 0x9000 0x6200 0x1e00 4.18 5d1137c09f01289dc62bf754f7290db3
.dynamic RW- 0xf0 0xb000 0x8000 0x200 0.34 5c94ed3206f05a277e6f04fbf131f131
.rela R-- 0xe58 0xc000 0x8200 0x1000 1.87 8b5c6bc30f3acb7ca7bf2e6789d68519
.dynsym R-- 0x138 0xd000 0x9200 0x200 0.96 bdcf5101da51aadc663ca8859f88138c
Imports
================================================================================
Any magic number is based on the Microsoft PE specification [1].
[1] https://docs.microsoft.com/en-us/windows/win32/debug/pe-format
bfd/ChangeLog:
2021-10-21 Tamar Christina <tamar.christina@arm.com>
PR binutils/26206
* .gitignore (pe-aarch64igen.c): New.
* Makefile.am (pei-aarch64.lo, pe-aarch64igen.lo, pei-aarch64.c,
pe-aarch64igen.c): Add support.
* Makefile.in: Likewise.
* bfd.c (bfd_get_sign_extend_vma): Add pei-aarch64-little.
* coff-aarch64.c: New file.
* coffcode.h (coff_set_arch_mach_hook, coff_set_flags,
coff_write_object_contents) Add aarch64 (aarch64_pei_vec) support.
* config.bfd: Likewise.
* configure: Likewise.
* configure.ac: Likewise.
* libpei.h (GET_OPTHDR_IMAGE_BASE, PUT_OPTHDR_IMAGE_BASE,
GET_OPTHDR_SIZE_OF_STACK_RESERVE, PUT_OPTHDR_SIZE_OF_STACK_RESERVE,
GET_OPTHDR_SIZE_OF_STACK_COMMIT, PUT_OPTHDR_SIZE_OF_STACK_COMMIT,
GET_OPTHDR_SIZE_OF_HEAP_RESERVE, PUT_OPTHDR_SIZE_OF_HEAP_RESERVE,
GET_OPTHDR_SIZE_OF_HEAP_COMMIT, PUT_OPTHDR_SIZE_OF_HEAP_COMMIT,
GET_PDATA_ENTRY, _bfd_peAArch64_bfd_copy_private_bfd_data_common,
_bfd_peAArch64_bfd_copy_private_section_data,
_bfd_peAArch64_get_symbol_info, _bfd_peAArch64_only_swap_filehdr_out,
_bfd_peAArch64_print_private_bfd_data_common,
_bfd_peAArch64i_final_link_postscript,
_bfd_peAArch64i_only_swap_filehdr_out, _bfd_peAArch64i_swap_aouthdr_in,
_bfd_peAArch64i_swap_aouthdr_out, _bfd_peAArch64i_swap_aux_in,
_bfd_peAArch64i_swap_aux_out, _bfd_peAArch64i_swap_lineno_in,
_bfd_peAArch64i_swap_lineno_out, _bfd_peAArch64i_swap_scnhdr_out,
_bfd_peAArch64i_swap_sym_in, _bfd_peAArch64i_swap_sym_out,
_bfd_peAArch64i_swap_debugdir_in, _bfd_peAArch64i_swap_debugdir_out,
_bfd_peAArch64i_write_codeview_record,
_bfd_peAArch64i_slurp_codeview_record,
_bfd_peAArch64_print_ce_compressed_pdata): New.
* peXXigen.c (_bfd_XXi_swap_aouthdr_in, _bfd_XXi_swap_aouthdr_out,
pe_print_pdata, _bfd_XX_print_private_bfd_data_common,
_bfd_XX_bfd_copy_private_section_data, _bfd_XXi_final_link_postscript):
Support COFF_WITH_peAArch64,
* pei-aarch64.c: New file.
* peicode.h (coff_swap_scnhdr_in, pe_ILF_build_a_bfd, pe_ILF_object_p):
Support COFF_WITH_peAArch64.
(jtab): Add dummy entry that traps.
* targets.c (aarch64_pei_vec): New.
binutils/ChangeLog:
2021-10-21 Tamar Christina <tamar.christina@arm.com>
PR binutils/26206
* NEWS: Add new support.
* objcopy.c (convert_efi_target): Add efi-*-aarch64 support.
* testsuite/binutils-all/aarch64/pei-aarch64-little.d: New test.
* testsuite/binutils-all/aarch64/pei-aarch64-little.s: New test.
include/ChangeLog:
2021-10-21 Tamar Christina <tamar.christina@arm.com>
PR binutils/26206
* coff/aarch64.h: New file.
* coff/pe.h (IMAGE_FILE_MACHINE_ARM64): New.
* nm.c: Add --unicode option to control how unicode characters are
handled.
* objdump.c: Likewise.
* readelf.c: Likewise.
* strings.c: Likewise.
* binutils.texi: Document the new feature.
* NEWS: Document the new feature.
* testsuite/binutils-all/unicode.exp: New file.
* testsuite/binutils-all/nm.hex.unicode
* testsuite/binutils-all/strings.escape.unicode
* testsuite/binutils-all/objdump.highlight.unicode
* testsuite/binutils-all/readelf.invalid.unicode
PR 27672
* readelf.c (sym_base): New variable.
(enum print_mode): Add more modes.
(print_vma): Add suport for new modes.
(options): Add sym-base.
(usage): Add sym-base.
(parse_args): Add support for --sym-base.
(print_dynamic_symbol_size): New function.
(print_dynamic_symbol): Use new function.
* doc/binutils.texi: Document the new feature.
* NEWS: Mention the new feature.
PR 27487
* nm.c (FORMAT_JUST_SYMBOLS): Define.
(struct optput_fns): Add entry for FORMAT_JUST_SYMBOLS.
(long_options): Add just-symbols.
(set_output_format): Add support for just-symbols.
(get_print_format): Likewise.
(do_not_print_object_filename): New function.
(do_not_print_archive_filename): New function.
(do_not_print_archive_member): New function.
(do_not_print_symbol_filename): New function.
(just_print_symbol_name): New function.
(main): Handle --just-symbols.
* NEWS: Mention the new feature.
* doc/binutils.texi: Document the new feature.
PR 27478
* objdump.c (process_links): New variable.
(usage): Add --process-links.
(long_options): Likewise.
(dump_bfd): Stop processing once the bfd has been loaded unless
this is the main file or process_links has been enabled.
(main): Handle the process-links option.
* readelf.c (process_links): New variable.
(struct filedata): Add is_separate field.
(options): Add --process-links.
(usage): Likewise.
(parse_args): Likewise.
(process_file_header): Include the filename when dumping
information for separate debuginfo files.
(process_program_headers): Likewise.
(process_section_headers): Likewise.
(process_section_groups): Likewise.
(process_relocs): Likewise.
(process_dynamic_section): Likewise.
(process_version_sections): Likewise.
(display_lto_symtab): Likewise.
(process_symbol_table): Likewise.
(process_syminfo): Likewise.
(initialise_dumps_by_name): Likewise.
(process_section_contents): Likewise.
(process_notes_at): Likewise.
(process_notes): Likewise.
(open_file): Add is_separate parameter. Use to initialise the
is_separate field in the filedata structure.
(open_deug): Update call to open_file.
(process_object): Add processing of the contents of separate
debuginfo files, gated by the process_links variable.
(process_archive): Update call to open_file.
(process_file): Initialise the is_separate field in the filedata
structure.
* dwarf.c (load_separate_debug_info_file): Only report the
loading of a separate file if debug links are being dumped.
* objcopy.c (keep_section_symbols): New variable.
(enum command_line_switch): Add OPTION_KEEP_SYMBOLS.
(strip_options): Add keep-section-symbols.
(copy_options): Likewise.
(copy_usage): Likewise.
(strip_usage): Likewise.
(copy_object): Keep section symbols if requested by command line
option.
(strip_main): Handle --keep-section-symbols.
(copy_main): Likewise.
* doc/binutils.texi: Document the new options.
* NEWS: Mention the new features.
* testsuite/binutils-all/compress.exp (test_gnu_debuglink):
Update options passed to objdump. Use diff rather than cmp to
compare the dumped data.
* testsuite/binutils-all/objdump.WK2: Update regexp.
* testsuite/binutils-all/objdump.WK3: Update regexp.
* testsuite/binutils-all/objdump.exp: Use --process-links
instead of --dwarf=follow-links.
* testsuite/binutils-all/readelf.exp (readelf_test): Include
readelf's output in the log when the test fails.
Add the -P option to the -wKis test.
* testsuite/binutils-all/readelf.wKis: Update expected output.
PR binutils/27408
* readelf.c (quiet): New option flag.
(enum long_option_values): New enum to hold long option value.
(long_options): Add --quiet.
(usage): Mention --quiet.
(display_rel_file): If quiet is enabled, suppress "no symbols".
(main): Handle the new option.
* NEWS: Mention --quiet.
* docs/binutils.texi: Document --quiet.
* dwarf.c (get_type_abbrev_from_form): Accept but ignore sup
forms.
(read_and_display_attr_value): Handle sup forms.
(display_debug_sup): New function. Displays the contents of a
.debug_sup section.
(load_debug_sup_file): New function. Loads the contents of a file
referenced by a .debug_sup section.
(check_for_and_load_links): Call load_debug_sup_file.
(debug_displays): Add entry for .debug_sup.
* dwarf.h (enum dwarf_section_display_enum): Add debug_sup.
* readelf.c (process_section_headers): Add support for debug_sup.
* doc/debug.options.texi: Note that the =links option will display
the contents of .debug_sup sections.
* NEWS: Mention the new support.
* configure.ac (follow-debug-links): Add option to enable or
disable the following of debug links by default. Set the
default for the option to be 'follow'.
* dwarf.c (do_follow_links): Initialise with DEFAULT_FOR_FOLLOW_LINKS.
(dwarf_select_sections_by_names): Add no-follow-links option.
(dwarf_select_sections_by_letter): Add 'N' option.
* objdump.c (usage): Add conditional text describing the
follow links option.
(slurp_symtab): Ensure that there is a NULL entry at the end
of the symbol table.
(slurp_dynamic_symtab): Likewise.
(dump_bfd): When extending the symbol table, ensure that there
is still a NULL entry at the end.
* readelf.c (usage): Add conditional text describing the
follow links option.
* doc/binutils.texi: Update documentation for objcopy and
readelf.
* doc/debug.options.texi: Update documentation of the
follow-links option.
* config.in: Regenerate.
* configure: Regenerate.
* testsuite/binutils-all/compress.exp: Add the -WN option to
objdump command lines that are not expecting to follow links.
* testsuite/binutils-all/readelf.exp: Add the
--debug-dump=no-follow-links option to tests that are not
expecting to follow debug links.
gas * testsuite/gas/mach-o/sections-1.d: Stop automatic debug link
following.
* testsuite/gas/xgate/insns-dwarf2.d: Likewise.
ld * testsuite/ld-elf/sec64k.exp: Stop readelf from automatically
following debug links.
PR 22967
* nm.c (ifunc_type_chars): New variable.
(long_options): Add --ifunc-chars.
(print_symbol): Use ifunc_type_chars for ifunc symbols.
(main): Handle the new option.
* doc/binutils.texi: Document the new option.
* configure.ac: Add --enable-f-for-ifunc-symbols option which
changes the default symbol displayed by nm.
* NEWS: Mention the new feature.
* testsuite/binutils-all/nm.exp: Test the new feature.
* config.in: Regenerate.
* configure: Regenerate.
The SHF_GNU_RETAIN section flag is an extension to the GNU ELF OSABI.
It is defined as follows:
=========================================================
Section Attribute Flags
+-------------------------------------+
| Name | Value |
+-------------------------------------+
| SHF_GNU_RETAIN | 0x200000 (1 << 21) |
+-------------------------------------+
SHF_GNU_RETAIN
The link editor should not garbage collect the section.
=========================================================
The .section directive accepts the "R" flag, which indicates
SHF_GNU_RETAIN should be applied to the section.
There is not a direct mapping of SHF_GNU_RETAIN to the BFD
section flag SEC_KEEP. Keeping these flags distinct allows
SHF_GNU_RETAIN sections to be explicitly removed by placing them in
/DISCARD/.
bfd/ChangeLog:
* elf-bfd.h (enum elf_gnu_osabi): Add elf_gnu_osabi_retain.
(struct elf_obj_tdata): Increase has_gnu_osabi to 4 bits.
* elf.c (_bfd_elf_make_section_from_shdr): Set elf_gnu_osabi_retain
for SHF_GNU_RETAIN.
(_bfd_elf_final_write_processing): Report if SHF_GNU_RETAIN is
not supported by the OSABI.
Adjust error messages.
* elflink.c (elf_link_input_bfd): Copy enabled has_gnu_osabi bits from
input BFD to output BFD.
(bfd_elf_gc_sections): gc_mark the section if SHF_GNU_RETAIN is set.
binutils/ChangeLog:
* NEWS: Announce SHF_GNU_RETAIN support.
* readelf.c (get_elf_section_flags): Handle SHF_GNU_RETAIN.
Recognize SHF_GNU_RETAIN and SHF_GNU_MBIND only for supported OSABIs.
* testsuite/binutils-all/readelf.exp: Run new tests.
Don't run run_dump_test when there isn't an assembler available.
* testsuite/lib/binutils-common.exp (supports_gnu_osabi): Adjust
comment.
* testsuite/binutils-all/readelf-maskos-1a.d: New test.
* testsuite/binutils-all/readelf-maskos-1b.d: New test.
* testsuite/binutils-all/readelf-maskos.s: New test.
* testsuite/binutils-all/retain1.s: New test.
* testsuite/binutils-all/retain1a.d: New test.
* testsuite/binutils-all/retain1b.d: New test.
gas/ChangeLog:
* NEWS: Announce SHF_GNU_RETAIN support.
* config/obj-elf.c (obj_elf_change_section): Merge SHF_GNU_RETAIN bit
between section declarations.
(obj_elf_parse_section_letters): Handle 'R' flag.
Handle numeric flag values within the SHF_MASKOS range.
(obj_elf_section): Validate SHF_GNU_RETAIN usage.
* doc/as.texi: Document 'R' flag to .section directive.
* testsuite/gas/elf/elf.exp: Run new tests.
* testsuite/gas/elf/section10.d: Unset SHF_GNU_RETAIN bit.
* testsuite/gas/elf/section10.s: Likewise.
* testsuite/gas/elf/section22.d: New test.
* testsuite/gas/elf/section22.s: New test.
* testsuite/gas/elf/section23.s: New test.
* testsuite/gas/elf/section23a.d: New test.
* testsuite/gas/elf/section23b.d: New test.
* testsuite/gas/elf/section23b.err: New test.
* testsuite/gas/elf/section24.l: New test.
* testsuite/gas/elf/section24.s: New test.
* testsuite/gas/elf/section24a.d: New test.
* testsuite/gas/elf/section24b.d: New test.
include/ChangeLog:
* elf/common.h (SHF_GNU_RETAIN): Define.
ld/ChangeLog:
* NEWS: Announce support for SHF_GNU_RETAIN.
* ld.texi (garbage collection): Document SHF_GNU_RETAIN.
(Output Section Discarding): Likewise.
* testsuite/ld-elf/elf.exp: Run new tests.
* testsuite/ld-elf/retain1.s: New test.
* testsuite/ld-elf/retain1a.d: New test.
* testsuite/ld-elf/retain1b.d: New test.
* testsuite/ld-elf/retain2.d: New test.
* testsuite/ld-elf/retain2.ld: New test.
* testsuite/ld-elf/retain2.map: New test.
* testsuite/ld-elf/retain3.d: New test.
* testsuite/ld-elf/retain3.s: New test.
* testsuite/ld-elf/retain4.d: New test.
* testsuite/ld-elf/retain4.s: New test.
* testsuite/ld-elf/retain5.d: New test.
* testsuite/ld-elf/retain5.map: New test.
* testsuite/ld-elf/retain5lib.s: New test.
* testsuite/ld-elf/retain5main.s: New test.
* testsuite/ld-elf/retain6a.d: New test.
* testsuite/ld-elf/retain6b.d: New test.
* testsuite/ld-elf/retain6lib.s: New test.
* testsuite/ld-elf/retain6main.s: New test.
* ar.c (long_options): Add --record-libdeps.
(usage): Mention the new option.
(decode_options): Handle the new option.
(replace_members): If necessary, create a bfd to hold the libdeps
description.
* binemul.c (ar_emul_append_bfd): New function.
(ar_emul_replace_bfd): New function.
(ar_emul_default_append): Replace file_name and target arguments
with new_bfd argument.
(ar_emul_default_replace): Likewise.
* binemul.h: Update prototypes.
(struct bin_emulation_xfer_struct): Update fields.
* doc/binutils.texi: Document the new option.
* NEWS: Mention the new feature.
* emul_aix.c (ar_emul_aix_append): Update.
(ar_emul_aix_replace): Likewise.
* testsuite/binutils-all/ar.exp: Add test of new feature.
* readelf.c (do_lto_syms): New local.
(long_option_values): Add OPTION_LTO_SYMS.
(options): Add --lto-syms.
(usage): Mention the new option.
(parse_args): Parse the new option.
(get_lto_kind): New function.
(get_lto_visibility): New function.
(get_lto_sym_type): New function.
(display_lto_symtab): New function - displays the contents of an
LTo symbol table section.
(process_lto_symbol_tables): New functions. Calls
dipslay_lto_symtab on any LTO symbol table section.
(process_object_file): Call process_lto_symbol_tables.
* doc/binutils.texi: Document the new option.
* NEWS: Mention the new feature.
PR binutils/26331
* readelf.c (do_demangle): New option flag.
(print_symbol): If do_demangle is enabled, demangle the symbol.
(enum long_option_values): New enum to hold long option values.
(options): Add demangle, no-demangle, recursion-limit and
no-recursion-limit options. Alpha sort the table.
(usage): Describe the new options.
(parse_args): Handle the new options.
* NEWS: Mention the new feature.
* doc/binutils.texi: Document the new feature.
* testsuite/binutils-all/readelf.exp: Test the new feature.
* testsuite/binutils-all/mangled.s: New file - assembler source.
* testsuite/binutils-all/readelf.demangled: New file - expected
output from readelf.
* readelf.c (warn): New function - like elfcomm.c version but only
produces output if warnings are enabled.
(struct options): Add --lint and --enable-checks.
(usage): Add entry for --lint.
(parse_args): Handle -L. If checks are enabled but no dumps have
been selected then enable all dumps.
(process_section_headers): Replace long if-then-else sequence with
a switch. Add warning messages for empty SHT_REL, SHT_RELA and
SHT_PROGBITS sections.
(process_file): Do not complain if the file is an archive and lint
mode has been enabled.
* elfcomm.c (error): Make the function weak.
(warn): Likewise.
* NEWS: Mention the new feature.
* doc/binutils.texi: Document the new feature.
* dwarf.h (report_leb_status): Add file name and line number
parameters. Include them in the diagnostic output.
(READ_ULEB): Pass file and line number to report_leb_status.
(READ_SLEB): Likewise.
* dwarf.c (read_and_print_leb128): Pass file and line number to
report_leb_status.
* testsuite/binutils-all/readelf.exp: Add test of new feature.
* testsuite/binutils-all/zero-sec.s: New test source file.
* testsuite/binutils-all/zero-sec.r: Expected output from new
test.
binutils* objdump.c (visualize_jumps, color_output, extended_color_output)
(detected_jumps): New variables.
(usage): Add the new jump visualization options.
(option_values): Add new option value.
(long_options): Add the new option.
(jump_info_new, jump_info_free): New functions.
(jump_info_min_address, jump_info_max_address): Likewise.
(jump_info_end_address, jump_info_is_start_address): Likewise.
(jump_info_is_end_address, jump_info_size): Likewise.
(jump_info_unlink, jump_info_insert): Likewise.
(jump_info_add_front, jump_info_move_linked): Likewise.
(jump_info_intersect, jump_info_merge): Likewise.
(jump_info_sort, jump_info_visualize_address): Likewise.
(disassemble_jumps): New function - used to locate jumps.
(disassemble_bytes): Add ascii art generation.
(disassemble_section): Add scan to locate jumps.
(main): Parse the new visualization option.
* doc/binutils.texi: Document the new feature.
* NEWS: Mention the new feature.
opcodes * arm-dis.c (print_insn_arm): Fill in insn info fields for control
flow instructions.
(print_insn_thumb16, print_insn_thumb32): Likewise.
(print_insn): Initialize the insn info.
* i386-dis.c (print_insn): Initialize the insn info fields, and
detect jumps.
debuginfod is a lightweight web service that indexes ELF/DWARF
debugging resources by build-id and serves them over HTTP. This patch
enables objdump and readelf to query debuginfod servers when they are
otherwise not able to find separate debug files. Binutils can be built
with debuginfod using the --with-debuginfod configure option. This
requires that libdebuginfod be installed and found at configure time.
debuginfod is packaged with elfutils, starting with version 0.178. For
more information see https://sourceware.org/elfutils/.
toplevel* config/debuginfod.m4: New file. Add macro AC_DEBUGINFOD. Adds
new configure option --with-debuginfod.
* configure: Regenerate.
* configure.ac: Call AC_DEBUGINFOD.
binutils* Makefile.am (readelf_LDADD, objdump_LDADD): Add libdebuginfod.
* Makefile.in: Regenerate.
* NEWS: Update.
* config.in: Regenerate.
* configure: Regenerate.
* configure.ac: Call AC_DEBUGINFOD.
* doc/Makefile.in: Regenerate.
* doc/binutils.texi: Add section on using binutils
with debuginfod.
* dwarf.c (debuginfod_fetch_separate_debug_info): New function.
Query debuginfod servers for the target debug file.
(load_separate_debug_info): Call
debuginfod_fetch_separate_debug_info if configured with
debuginfod.
(load_separate_debug_files): Add file argument to
load_separate_debug_info calls.
* dwarf.h (get_build_id): Add declaration.
* objdump.c (get_build_id): New function. Get build-id of file.
* readelf.c (get_build_id): Likewise.
* testsuite/binutils-all/debuginfod.exp: New tests.
* testsuite/binutils-all/linkdebug.s: Add .note.gnu.build-id
section.
llvm-objcopy and llvm-strip support an option --keep-section that
keeps some sections from being removed.
* objcopy.c (enum option_values): Add OPTION_KEEP_SECTION.
(SECTION_CONTEXT_KEEP): Define. Adjust other SECTION_CONTEXT macros.
(copy_usage): Describe --keep-section.
(strip_usage): Likewise.
(copy_main): Handle SECTION_CONTEXT_KEEP.
(strip_main): Likewise.
(is_strip_section_1): Likewise.
* testsuite/binutils-all/objcopy.exp: Add tests.
* testsuite/binutils-all/keep-section-1.d: New test driver file.
* testsuite/binutils-all/keep-section-2.d: Likewise.
* doc/binutils.texi: Document the new feature.
* NEWS: Mention the new feature.
* ar.c (emum long option numbers): Declare. Use to provide
numerical values for long options.
(long_options): Add --output option.
(usage): Mention the --output option.
(open_output_file): New function. Create a filepath for an output
file and open it.
(extract_file): Use open_output_file().
(open_output_file):
* testsuite/binutils-all/ar.exp: Add a test of the new feature.
* doc/binutils.texi: Document the new feature.
* NEWS: Mention the new feature.
PR 24931
* objdump.c (source_comment): New static variable.
(option_values): Add OPTION_SOURCE_COMMENT.
(long_opions): Add --source-comment.
(print_line): If source comment is set, use it as a prefix to the
source code line.
(main): Handle OPTION_SOURCE_COMMENT.
* doc/binutils.texi: Document the new option.
* NEWS: Mention the new feature.
* testsuite/binutils-all/objdump.exp (test_objdump_S): Add tests
of the -S and --source-comment options.
This introduces CTF support for objdump and readelf. objdump has the
following new arguments:
--ctf=SECTION: display CTF in the given SECTION
--ctf-parent=SECTION: name of CTF section that is the parent of this section
readelf has the above, and these two as well:
--ctf-symbols=SECTION: name of symbol table section (optional)
--ctf-strings=SECTION: name of string table section (optional)
(objdump can always use BFD machinery to determine the applicable string
and symbol tables automatically, so these arguments are unnecessary.)
Nearly all the work is done by the ctf_dump machinery in libctf: most of
the remaining work is option-processing and section-reading, and thus is
different for objdump and readelf: the minimal amount of similar code
remaining is, in my view, too small to share, particularly given that
objdump uses ctf_bfdopen() and readelf uses ctf_simple_open() since it
doesn't have a bfd.
I am not particularly satisfied with the way resources are freed in
either of these (I was forced to do it at the top level, for lack of
anywhere else to free resources allocated during option processing), but
I can't see any better way to do it without introducing new
infrastructure for no other purpose.
There are essentially arbitrary ordering changes to the Makefile.in's
order of libtool-related stuff that I can't get rid of, but they have no
semantic effect. (It is possible that some hunks of these changes could
be dropped, but that seems a bit risky to me.)
binutils/
* objdump.c (ctf-api.h): New include.
(dump_ctf_section_info): New variable.
(dump_ctf_section_name): Likewise.
(usage): Describe new options.
(enum option_values): Add OPTION_CTF and OPTION_CTF_PARENT.
(main): Use them to add --ctf and --ctf-parent.
(read_section_stabs): Add new parameter, entsize_ptr.
(find_stabs_section): Adjust accordingly.
(make_ctfsect): New.
(dump_ctf_indent_lines): New.
(dump_ctf_archive_member): New.
(dump_ctf): New.
(dump_bfd): Call it. Free resources afterwards.
* readelf.c (ctf-api.h): New include.
(CTF_DUMP): New.
(static bfd_boolean do_ctf): Likewise.
(dump_ctf_parent_name): Likewise.
(dump_ctf_symtab_name): Likewise.
(dump_ctf_strtab_name): Likewise.
(OPTION_CTF_DUMP): Likewise.
(OPTION_CTF_PARENT): Likewise.
(OPTION_CTF_SYMBOLS): Likewise.
(OPTION_CTF_STRINGS): Likewise.
(options): Add them.
(usage): Likewise.
(parse_args): Handle the new options, requesting CTF_DUMP.
(process_section_contents): Handle CTF_DUMP.
(shdr_to_ctf_sect): New.
(dump_ctf_indent_lines): New.
(dump_section_as_ctf): New.
(main): Free resources.
* Makefile.am (LIBCTF): New variable.
(objdump_DEPENDENCIES): Use it.
(readelf_DEPENDENCIES): Likewise.
(objdump_LDADD): Likewise.
(readelf_LDADD): Likewise.
* aclocal.m4: Regenerated.
* Makefile.in: Likewise.
* doc/binutils.texi (objdump): Document the new options.
(readelf): Likewise.
* doc/ctf.options.texi: New.
* doc/Makefile.in: Regenerated.
* NEWS: Mention the new feature.
PR 19921
binutils* objcopy.c: Add new option --verilog-data-width. Use it to set
the value of VerilogDataWidth.
* doc/binutils.texi: Document the new option.
* testsuite/binutils-all/objcopy.exp: Run tests of new option.
* testsuite/binutils-all/verilog-1.hex: New file.
* testsuite/binutils-all/verilog-2.hex: New file.
* testsuite/binutils-all/verilog-4.hex: New file.
* testsuite/binutils-all/verilog-8.hex: New file.
* NEWS: Mention the new feature.
bfd * verilog.c: (VerilogDataWidth): New variable.
(verilog_write_record): Emit bytes in VerilogDataWidth bundles.
* objdump.c (sym_ok): New function.
(find_symbol_for_address): Use new function.
(disassemble_section): Compare sections by name, not pointer.
(dump_dwarf): Move code to initialise byte_get pointer and iterate
over separate debug files from here to ...
(dump_bfd): ... here. Add parameter indicating that a separate
debug info file is being dumped. For main file, pull in the
symbol tables from all separate debug info files.
(display_object): Update call to dump_bfd.
* doc/binutils.texi: Document extened behaviour of the
--dwarf=follow-links option.
* NEWS: Mention this new feature.
* testsuite/binutils-all/objdump.WK2: Update expected output.
* testsuite/binutils-all/objdump.exp (test_follow_debuglink): Add
options and dump file parameters.
Add extra test.
* testsuite/binutils-all/objdump.WK3: New file.
* testsuite/binutils-all/readelf.exp: Change expected output for
readelf -wKis test.
* testsuite/binutils-all/readelf.wKis: New file.
PR 23843
* dwarf.h (struct separate_info): New structure for containing
information on separate debug info files.
* dwarf.c (struct dwo_info): New structure for containing dwo
links.
(first_dwo_info): Chain of dwo_info structures.
(first_separate_file): Chain of separate_info structures.
(separate_debug_file, separate_debug_filename): Delete.
(fetch_alt_indirect_string): Scan all separate debug info files
for the requested string.
(add_dwo_info): New function.
(add_dwo_name): New function.
(add_dwo_dir): New function.
(add_dwo_id: New function.
(free_dwo_info): New function.
(read_and_display_attr_value): Store DWO data using the new
functions.
(load_debug_section_with_follow): If necessary, scan the list of
separate debug info files for the requested section.
(add_separate_debug_file): New function.
(load_separate_debug_info): Call add_separate_debug_file to store
the information on the newly loaded file.
(load_dwo_file): Likewise.
(load_separate_debif_file): Rename to load_separate_debug_files.
Change return type to boolean. If following links then attempt to
load all separate debug info files, not just the first one.
(free_debug_memory): Release memory in dwo_info and separate_info
chains.
* objdump.c (dump_dwarf): Iterate over all loaded debg info files.
* readelf.c (process_object): Likewise.
* doc/debug.options.texi: Update descriptions of links and
follow-links options.
* testsuite/binutils-all/objdump.WK2: Update expected output.
* testsuite/binutils-all/readelf.k2: Likewise.
* NEWS: Announce the new feature.
The size tool currently defaults to berkeley format output. However,
this output format has a weird quirk, read-only data is counted
against the text sections, not the data sections.
The code offers no real explanation for why this is, but I'm reluctant
to change it for two reasons, first, I'm assuming it probably makes
sense in some case that I'm not thinking of (maybe a target where
sections are not marked executable, and so there's no distinction
between read-only data and code), and second, the code has been this
way for at least 20 years, I worry that changing things now might
cause more confusion than it solves.
This commit then introduces a new output format for the size tool,
this new format displays the results in a similar manor to the
berkeley format, but counts read-only data in the data column, and
only executable sections are counted in the text column.
Given that this is a brand new output format I've gone ahead and
simplified things a little, while the berkeley format displays the
total twice, once in decimal and once in hex, the new display format
just displays the total in decimal. Of course, there's still the
'--radix' option which can be used to display all the results in
hexadecimal or octal.
I've called the new format 'gnu', so '--format=gnu' or '-G' are used
to access it.
binutils/ChangeLog:
* size.c (berkeley_format): Delete.
(enum output_format): New enum.
(selected_output_format): New variable.
(usage): Update to mention GNU format.
(main): Update to extract options, and select format as needed.
Handle GNU format where needed.
(berkeley_sum): Renamed to...
(berkeley_or_gnu_sum): ...this, and updated to handle both formats.
(berkeley_format): Renamed to...
(berkeley_or_gnu_format): ...this, and updated to handle both
formats.
(print_sizes): Handle GNU format.
* doc/binutils.texi (size): Document new GNU format.
* testsuite/binutils-all/size.exp: Add test of extended
functionality.
* NEWS: Mention new functionality.
* objdump.c (disassemble_section): When disassembling from a
symbol only stop at the next symbol if the original symbol was not
a function symbol. Otherwise continue disassembling until a new
function is reached.
* testsuite/binutils-all/objdump.exp: Add tests of extended
functionality.
* testsuite/binutils-all/disasm.s: New test source file.
