Commit Graph

766 Commits

Author SHA1 Message Date
Alan Modra
b90efa5b79 ChangeLog rotatation and copyright year update 2015-01-02 00:53:45 +10:30
Alan Modra
ca0694adf6 Don't create .eh_frame_hdr on shared lib bfd
If no object files have .eh_frame, but some shared library does, then
ld creates a .eh_frame_hdr section using the shared library bfd.  This
is silly since shared library .eh_frame sections don't contribute to
the output .eh_frame and thus no .eh_frame_hdr is needed.

Also, the bfd section list and count is cleared for shared libraries,
and a zero section count used as a flag in lang_check to omit a call
to bfd_merge_private_bfd_data for shared libraries.  If we create a
section on a shared lib bfd then ld will wrongly attempt to merge the
shared library private bfd data.

	PR 17742
	* ld/emultempl/elf32.em (gld${EMULATION_NAME}_after_open): Exclude
	shared libraries in loop looking for .eh_frame sections.
	Similarly for build-id loop.
2014-12-24 23:47:56 +10:30
Andrew Burgess
9d7b48dc6e AVR/ld: Propagate link-relax elf header flag correctly.
The AVR target has an elf header flag to indicate if an object was
assembler ready for linker relaxation.  If a partial link is performed
then it is important that the link-relax flag in the output object is
set correctly, otherwise, during the final link, we might try to perform
linker relaxation on code that was not assembled suitably.

As the link-relax elf header covers the entire object file we must be
conservative when setting the flag in the output object, so, for a
partial link, any input object that does not have the link-relax flag
set will cause the output object to also not have the link-relax flag
set.

This conservative approach could be softened in future, we only need to
disable the link relax flag if an input file is not marked link-relax
ready, and the input file contains a relaxable section.  However, I've
left this optimisation for a later day.

For the final link I've overloaded the use of the link-relax elf header
flag, in a final executable, the flag now indicates if the executable
was built with linker relaxation on or not.

ld/ChangeLog:

	* emultempl/avrelf.em: Add include of elf/avr.h.
	(avr_finish): New function.
	(LDEMUL_FINISH): Added.

ld/testsuite/ChangeLog:

	* ld-avr/relax-elf-flags-01.d: New file.
	* ld-avr/relax-elf-flags-02.d: New file.
	* ld-avr/relax-elf-flags-03.d: New file.
	* ld-avr/relax-elf-flags-04.d: New file.
	* ld-avr/relax-elf-flags-05.d: New file.
	* ld-avr/relax-elf-flags-06.d: New file.
	* ld-avr/relax-elf-flags-07.d: New file.
	* ld-avr/relax-elf-flags-08.d: New file.
	* ld-avr/relax-elf-flags-a.s: New file.
	* ld-avr/relax-elf-flags-b.s: New file.
2014-12-23 15:45:11 +00:00
Alan Modra
e05fa0bad2 PowerPC64 --plt-align
Alignment of plt stubs was broken, firstly because the option was
being dropped due to the alignment value not being set in the "params"
struct used in elf64-ppc.c, and secondly due to not calculating the
number of alignment boundary crossings correctly.

bfd/
	* elf64-ppc.c (plt_stub_pad): Correct.
ld/
	* ld.texinfo: Correct --plt-align documentation.
	* emultempl/ppc64elf.em (plt_stub_align): Delete.  Use and set
	params.plt_stub_align instead.
2014-11-24 12:56:59 +10:30
Igor Zamyatin
d258b82828 Add -z bndplt to generate BND prefix in PLT entries
This patch adds "-z bndplt" option Linux/x86-64 linker to generate BND
prefix in PLT entries.  It also updated Linux/x86-64 assembler not to
generate R_X86_64_PLT32_BND nor R_X86_64_PC32_BND relocations.

bfd/

2014-11-18  Igor Zamyatin  <igor.zamyatin@intel.com>

	* elf64-x86-64.c (elf_x86_64_check_relocs): Enable MPX PLT only
	for -z bndplt.

gas/

2014-11-18  Igor Zamyatin  <igor.zamyatin@intel.com>

	* config/tc-i386-intel.c (i386_operator): Remove last argument
	from lex_got call.
	* config/tc-i386.c (reloc): Remove bnd_prefix from parameters'
	list.  Return always BFD_RELOC_32_PCREL.
	* (output_branch): Remove condition for BFD_RELOC_X86_64_PC32_BND.
	* (output_jump): Update call to reloc accordingly.
	* (output_interseg_jump): Likewise.
	* (output_disp): Likewise.
	* (output_imm): Likewise.
	* (x86_cons_fix_new): Likewise.
	* (lex_got): Remove bnd_prefix from parameters' list in macro and
	declarations. Don't use BFD_RELOC_X86_64_PLT32_BND.
	* (x86_cons): Update call to lex_got accordingly.
	* (i386_immediate): Likewise.
	* (i386_displacement): Likewise.
	* (md_apply_fix): Don't use BFD_RELOC_X86_64_PLT32_BND nor
	BFD_RELOC_X86_64_PC32_BND.
	* (tc_gen_reloc): Likewise.

include/

2014-11-18  Igor Zamyatin  <igor.zamyatin@intel.com>

	* bfdlink.h (struct bfd_link_info): Add bndplt.

ld/

2014-11-18  Igor Zamyatin  <igor.zamyatin@intel.com>

	* emulparams/elf_x86_64.sh (BNDPLT): Set to yes for x86_64.
	* emultempl/elf32.em (gld${EMULATION_NAME}_handle_option): Handle
	"-z bndplt" if BNDPLT is yes.
	(gld${EMULATION_NAME}_list_options): Add "-z bndplt" entry.
	* ld.texinfo: Add description for bndplt.

ld/testsuite/

2014-11-18  Igor Zamyatin  <igor.zamyatin@intel.com>

	* testsuite/ld-x86-64/bnd-ifunc-1.d: Add bndplt option.
	* testsuite/ld-x86-64/bnd-ifunc-2.d: Likewise.
	* testsuite/ld-x86-64/bnd-plt-1.d: Likewise.  Update dissassembly
	sections.
	* testsuite/ld-x86-64/mpx.exp: Handle mpx3 and mpx4 tests.
	* testsuite/ld-x86-64/mpx1a.rd: Remove _BND from relocation name.
	* testsuite/ld-x86-64/mpx1c.rd: Likewise.
	* testsuite/ld-x86-64/mpx2a.rd: Likewise.
	* testsuite/ld-x86-64/mpx2c.rd: Likewise.
	* testsuite/ld-x86-64/mpx3.dd: New file.
	* testsuite/ld-x86-64/mpx3a.s: Likewise.
	* testsuite/ld-x86-64/mpx3b.s: Likewise.
	* testsuite/ld-x86-64/mpx4.dd: Likewise.
	* testsuite/ld-x86-64/mpx4a.s: Likewise.
	* testsuite/ld-x86-64/mpx4b.s: Likewise.
2014-11-18 05:40:17 -08:00
Alan Modra
0cdcdbf8db Regenerate spu overlay and icache manager files
Nothing to see here, just the changed placement of section headers.

	* emultempl/spu_icache.o_c: Regenerate.
	* emultempl/spu_ovl.o_c: Regenerate.
2014-11-04 22:36:13 +10:30
Jiong Wang
68fcca92b7 [AArch64] Cortex-A53 erratum 835769 linker workaround
2014-10-22  Tejas Belagod  <tejas.belagod@arm.com>

bfd/
	* bfd-in.h (bfd_elf64_aarch64_set_options): Add a parameter.
	* bfd-in2.h (bfd_elf64_aarch64_set_options): Likewise.
	* elfnn-aarch64.c (aarch64_erratum_835769_stub): New.
	(elf_aarch64_stub_type): Add new type
	aarch64_stub_erratum_835769_veneer.
	(elf_aarch64_stub_hash_entry): New fields for erratum 835769.
	(aarch64_erratum_835769_fix): New data struct to record erratum
	835769.
	(elf_aarch64_link_hash_table: Global flags for 835769.
	(aarch64_build_one_stub): Add case for 835769.
	(aarch64_size_one_stub): Likewise.
	(aarch64_mem_op_p, aarch64_mlxl_p,
	aarch64_erratum_sequence,erratum_835769_scan):
	New. Decode and scan functions for erratum 835769.
	(elf_aarch64_create_or_find_stub_sec): New.
	(elfNN_aarch64_size_stubs): Look for erratum 835769 and record
	them.
	(bfd_elfNN_aarch64_set_options: Set global flag for 835769.
	(erratum_835769_branch_to_stub_data,
	make_branch_to_erratum_835769_stub):New. Connect up all the
	erratum stubs to occurances by branches.
	(elfNN_aarch64_write_section): New hook.
	(aarch64_map_one_stub): Output erratum stub symbol.
	(elfNN_aarch64_size_dynamic_sections): Init mapping symbol
	information for erratum 835769.
	(elf_backend_write_section): Define.

ld/
	* emultempl/aarch64elf.em: Add command-line option for erratum
	835769.

ld/testsuite/

	* ld-aarch64/aarch64-elf.exp (aarch64elftests): Drive erratum
	835769 tests.
	* ld-aarch64/erratum835769.d: New.
	* ld-aarch64/erratum835769.s: New.
2014-10-24 11:39:35 +01:00
Alan Modra
459609d6f8 PR17488, powerpc64-linux-ld segfault
For binary ouput, we don't have an ELF bfd output so can't access
elf_elfheader.  The elf64-ppc.c changes are really just a tidy,
triggered by looking at all places where the abiversion bits are
accessed.

bfd/
	* elf64-ppc.c (ppc64_elf_before_check_relocs): Do .opd processing
	even when output is not ppc64 ELF.  Remove redundant tests on
	type of input bfd.
ld/
	PR 17488
	* emultempl/ppc64elf.em (gld${EMULATION_NAME}_finish): Don't attempt
	to access ELF header e_flags when not ppc64 ELF output.
2014-10-16 11:22:14 +10:30
Kuan-Lin Chen
1c8f6a4d1f NDS32: Code refactoring of relaxation.
Refactor each relaxation pattern to raise the maintainability.
In origin, all patterns is analysed in nds32_elf_relax_section,
so it is hard to debug and maintain.  Therefore, we classify all
patterns into different functions in this patch.
Moreover, we adjust all optimizations into nds32_elf_relax_section
to take these optimizations in turn.  This can promise all relaxation
being done after calling gld${EMULATION_NAME}_after_allocation.
2014-09-16 13:08:00 +08:00
Jon TURNEY
74fffc3982 Change pe/coff build-id section name to '.buildid'
The section name used to store the build-id on pe/coff is arbitrary, as it's
contents should be located using the pe/coff header's DataDirectory debug data
entry, not by using the section name.

But '.build-id' is not a good choice for that section name, as it is 9
characters long, and hence truncated to 8 characters when
--disable-long-section-names is used (which is the default, when producing an
executable with no dwarf debug sections, e.g. using ld --strip-all --build-id)

This truncation then breaks 'objcopy --only-keep-debug', which does use the
section name, due to concerns that keeping an arbitrary section which contains
the debug directory is not sensible.

binutils/ChangeLog

2014-09-01  Jon TURNEY  <jon.turney@dronecode.org.uk>

	* objcopy.c (is_nondebug_keep_contents_section): Change pe/coff
	build-id section name from '.build-id' to '.buildid'.

ld/ChangeLog

2014-09-01  Jon TURNEY  <jon.turney@dronecode.org.uk>

	* emultempl/pe.em (write_build_id, setup_build_id): Change pe/coff
	build-id section name from '.build-id' to '.buildid'.
	* emultempl/pep.em (write_build_id, setup_build_id): Ditto.

Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
2014-09-08 17:54:20 +01:00
Alan Modra
da44f4e546 Index PowerPC64 linker generated .eh_frame in .eh_frame_hdr
I noticed recently that .eh_frame FDEs generated by the linker for
call stubs and .glink weren't being indexed in .eh_frame_hdr, due to
bfd_elf_discard_info being run before the linker generated .eh_frame
sections were available for parsing.  This patch moves code around in
elf64-ppc.c and ppc64elf.em to avoid that problem.

Another problem fixed here is that --gc-sections parses .eh_frame
early, and the existing machinery allows only one go at parsing the
.eh_frame sections.  That resulted in the linker generated .eh_frame
CIEs not being merged and no .eh_frame_hdr index entries for those
FDEs.  It turns out that all the info from parsing .eh_frame is
attached to the section, so order of parsing isn't important, and
after parsing sec_info_type being set will prevent a section being
parsed again.  At least, when parsing doesn't hit an error.  So there
isn't really any need for "parsed_eh_frame".  "merge_cies" is also
redundant, which means _bfd_elf_{begin,end}_eh_frame_parsing can also
disappear.

bfd/
	* elf-bfd.h (struct eh_frame_hdr_info): Delete merge_cies and
	parsed_eh_frames.
	(_bfd_elf_begin_eh_frame_parsing): Delete.
	(_bfd_elf_end_eh_frame_parsing): Delete.
	* elf-eh-frame.c (_bfd_elf_begin_eh_frame_parsing): Delete.
	(_bfd_elf_end_eh_frame_parsing): Delete.
	(_bfd_elf_parse_eh_frame): Don't test parsed_eh_frame.  Test
	!info->relocatable in place of merge_cies.
	* elflink.c (bfd_elf_gc_sections, bfd_elf_discard_info): Adjust.
	* elf64-ppc.c (glink_eh_frame_cie): Pad to multiple of 8.
	(ppc64_elf_size_stubs): Likewise pad stub FDE.
	(ppc64_elf_build_stubs): Move code setting glink .eh_frame to..
	(ppc64_elf_size_stubs): ..here and..
	(ppc64_elf_finish_dynamic_sections): ..here.
ld/
	* emultempl/ppc64elf.em (gld${EMULATION_NAME}_after_allocation): Call
	bfd_elf_discard_info after generating glink .eh_frame.  Delete
	redundant test on ppc64_elf_setup_section_lists status.
2014-08-22 10:09:09 +09:30
Maciej W. Rozycki
8c45e5ec6b ARM/ld: Correct macro formatting in armelf.em
* emultempl/armelf.em (OPTION_STUBGROUP_SIZE): Fix formatting.
	(OPTION_NO_MERGE_EXIDX_ENTRIES, OPTION_LONG_PLT): Likewise.
2014-08-20 20:17:18 +01:00
Nick Clifton
2d5c3743a3 Enabling the HIGH_ENTROPY_VA flag allows the operating system to use
addresses outside of the 32-bit range before memory exhaustion. This
results in a higher entropy implementation of ASLR when used with the
DYNAMIC_BASE flag.

	* include/coff/pe.h: Add HIGH_ENTROPY_VA flag
	* ld/emultempl/pep.em: Add --high-entropy-va switch
	* ld/ld.texinfo: Document the --high-entropy-va switch
2014-08-20 16:10:29 +01:00
Alan Modra
759388538d Return error status from bfd_elf_discard_info.
bfd/
	* elflink.c (bfd_elf_discard_info): Return int error status.
	* stabs.c (_bfd_discard_section_stabs): Comment typo fix.
	* bfd-in.h (bfd_elf_discard_info): Updata prototype.
	* bfd-in2.h: Regenerate.
ld/
	* emultempl/aarch64elf.em (gld${EMULATION_NAME}_after_allocation):
	Handle error status from bfd_elf_discard_info.
	* emultempl/armelf.em: Likewise.
	* emultempl/elf32.em: Likewise.
	* emultempl/hppaelf.em: Likewise.
	* emultempl/metagelf.em: Likewise.
	* emultempl/nios2elf.em: Likewise.
	* emultempl/ppc64elf.em: Likewise.
	* emultempl/tic6xdsbt.em: Likewise.
	* emultempl/vms.em: Likewise.
2014-08-18 09:33:35 +09:30
Alan Modra
18cd5bce47 Linker part of PR16563 fix
Presents .eh_frame input sections to the optimisation machinery in
elf-eh-frame.c in the order they are given by the linker script.

	PR 16563
bfd/
	* elflink.c (bfd_elf_discard_info): Process .eh_frame and .stab
	in the order they are mapped to output sections.
ld/
	* ldlang.c (map_head_is_link_order): Rename from
	stripped_excluded_sections.
	(lang_clear_os_map): New function, extracted from..
	(strip_excluded_output_sections): ..here.
	* ldlang.h (lang_clear_os_map): Declare.
	* ldwrite.c (ldwrite): Call lang_clear_os_map.
	* emultempl/sh64elf.em (sh64_elf_${EMULATION_NAME}_after_allocation):
	Likewise.
2014-08-14 13:49:31 +09:30
Max Filippov
e7d17e71cd Fix xtensa ld segfault when linking linux modules
is_inconsistent_linkonce_section makes an assumption that section name
that starts with ".gnu.linkonce.prop." has one more dot in its suffix.
However gas generates such section name by insertion of "prop." right
after ".gnu.linkonce." part of the name of the original section. So, for
section named ".gnu.linkonce.this_module" corresponding property section
name does not satisfy the assumption. Such section names are common in
linux modules. This bug was exposed by the patch "a35d5e8 Fix alignment
for the first section frag on xtensa", that makes gas produce property
section for each section that has ".align" directive in it.

Use suffix that immediately follows ".gnu.linkonce.prop." when there are
no more dots following it.

2014-07-10  Max Filippov  <jcmvbkbc@gmail.com>

ld/
    * emultempl/xtensaelf.em (is_inconsistent_linkonce_section):
    correctly handle missing dot in section name after
    ".gnu.linkonce.prop.".
2014-07-10 19:22:07 +04:00
Alan Modra
7341d5e22f Add symbols for global entry stub, and report stats
The undefined function symbols (with non-zero value) on global entry
stubs are discarded by objdump when disassembling, so give objdump
another symbol to mark the stubs.

Also fixes a couple of bugs:
- entry_section was set to .opd for ELFv2, which meant a hard error
  rather than a warning when _start wasn't defined.
- global entry stubs were not built if they were the only type of
  stub in an executable.

bfd/
	* elf64-ppc.c (ppc_stub_type): Add ppc_stub_global_entry.
	(struct ppc_link_hash_table): Increase size of stub_count array.
	(build_global_entry_stubs): Emit symbol on global entry stub.
	(ppc64_elf_build_stubs): NULL check htab->brlt.  Add global entry
	stub stats.
ld/
	* emultempl/ppc64elf.em (stub_added): Delete.
	(gld${EMULATION_NAME}_finish): Call ppc64_elf_build_stubs even when
	none of the usual stubs have been added.  Only change entry_section
	for ELFv1.
2014-07-01 20:28:20 +09:30
Linda Zhang
eeb14e5a5b Change the default behaviour of the PE targeted linker so that timestamps are
inserted.  This is for compatibility with other, non-GNU tools.  Deterministic
binaries can still be created by using the new --no-insert-timestamp command line
option.

	* emultempl/pe.em: Initialise insert_timestamp to true.
	Add a --no-insert-timestamp command line option.
	* emultempl/pep.em: Likewise.
	* ld.texinfo: Document that --insert-timestamp is enabled by
	default and that it now has an inverse command line option.
	* NEWS: Mention the new behaviour.
2014-06-26 12:18:39 +01:00
Alan Modra
c72f2fb2bb Make bfd.link_next field a union
This field of struct bfd is currently only used to chain together
linker input files.  This patch prepares to use the field to stash
the linker hash table, which is always created on the linker output
file.

bfd/
	* bfd.c (struct bfd): Replace link_next with a union.
	* aoutx.h, * bfd.c, * coff-ppc.c, * coff-rs6000.c, * cofflink.c,
	* ecoff.c, * elf-m10300.c, * elf32-arm.c, * elf32-avr.c,
	* elf32-hppa.c, * elf32-i386.c, * elf32-lm32.c, * elf32-m32c.c,
	* elf32-m32r.c, * elf32-m68hc1x.c, * elf32-metag.c,
	* elf32-microblaze.c, * elf32-nds32.c, * elf32-nios2.c,
	* elf32-or1k.c, * elf32-ppc.c, * elf32-rl78.c, * elf32-s390.c,
	* elf32-score.c, * elf32-score7.c, * elf32-sh.c, * elf32-spu.c,
	* elf32-tic6x.c, * elf32-tilepro.c, * elf32-xstormy16.c,
	* elf32-xtensa.c, * elf64-alpha.c, * elf64-hppa.c, * elf64-ia64-vms.c,
	* elf64-mmix.c, * elf64-ppc.c, * elf64-s390.c, * elf64-x86-64.c,
	* elflink.c, * elfnn-aarch64.c, * elfxx-mips.c, * elfxx-sparc.c,
	* elfxx-tilegx.c, * linker.c, * pdp11.c, * peXXigen.c, * simple.c,
	* sunos.c, * vms-alpha.c, * xcofflink.c: Update for above.
	* bfd-in2.h: Regenerate.
include/
	* bfdlink.h: Update for bfd.link_next change.
ld/
	* emultempl/cr16elf.em, * emultempl/elf32.em, * emultempl/genelf.em,
	* emultempl/m68kcoff.em, * emultempl/m68kelf.em,
	* emultempl/nds32elf.em, * emultempl/pe.em, * emultempl/pep.em,
	* ldlang.c, * ldmain.c, * pe-dll.c: Update for bfd.link_next change.
2014-06-13 19:10:57 +09:30
DJ Delorie
b26dbe2773 Fix typo. 2014-05-27 19:05:18 -04:00
DJ Delorie
7a2f2d82fd Add new link-map-text hook and RX auto-vector support.
* bfd/elf32-rx.c (get_symbol_value_maybe): New.
(rx_elf_relocate_section): If we find a reloc against
$tableentry$default$<name>, redirect it to the appropriate
$tableentry$<n>$.
(RX_Table_Info): New.
(rx_table_find): New.  Check all tables and SEC_KEEP all sections
with table parts in them.
(rx_check_directives): New.
(rx_table_map_2): New.
(rx_table_map): New.
(rx_additional_link_map_text): New.  Called to dump tables to the
map file.
* bfd/elf32-rx.h: New.

* ld/ldemul.h (extra_map_file_text): New field.
(ldemul_extra_map_file_text): Declare.
* ld/ldemul.c (ldemul_extra_map_file_text): Define.
* ld/ldlang.c (lang_map): Call it.

* ld/emultempl/rxelf.em: Add extra_map_file_text hook.
* ld/emultempl/aix.em: Add NULL extra_map_file_text hook.
* ld/emultempl/armcoff.em: Likewise.
* ld/emultempl/beos.em: Likewise.
* ld/emultempl/elf32.em: Likewise.
* ld/emultempl/generic.em: Likewise.
* ld/emultempl/gld960.em: Likewise.
* ld/emultempl/gld960c.em: Likewise.
* ld/emultempl/linux.em: Likewise.
* ld/emultempl/lnk960.em: Likewise.
* ld/emultempl/m68kcoff.em: Likewise.
* ld/emultempl/pe.em: Likewise.
* ld/emultempl/pep.em: Likewise.
* ld/emultempl/sunos.em: Likewise.
* ld/emultempl/ticoff.em: Likewise.
* ld/emultempl/vanilla.em: Likewise.
2014-05-27 17:14:49 -04:00
Alan Modra
93d1b056cb Rewrite ppc32 backend .sdata and .sdata2 handling
1) _SDA_BASE_ and _SDA2_BASE_ and defined automatically, in a similar
   manner to the way _GLOBAL_OFFSET_TABLE_ is handled.  It's a little
   more complicated to remove the symbols because _SDA_BASE_ needs to
   be there if either .sdata or .sbss is present, and similarly for
   _SDA2_BASE.
2) The linker created .sdata and .sdata2 sections used for
   R_PPC_EMB_SDAI16 and R_PPC_EMB_SDA2I16 pointers are created early.
   Nowadays we strip unneeded sections from the output, so it isn't
   necessary to delay creating the sections.
3) The output section for targets of various SDA relocs is now checked
   as per the ABI(s).  We previously allowed .sdata.foo and similar,
   most likely because at some stage we were checking input sections.

Also, the patch fixes a long-standing bug in size_input_sections
that affects the values of symbols defined in stripped input
sections.

	PR 16952
bfd/
	* elf32-ppc.c (ppc_elf_create_linker_section): Move earlier.
	Remove redundant setting of htab->elf.dynobj.  Don't align.
	Define .sdata symbols using _bfd_elf_define_linkage_sym.
	(ppc_elf_create_glink): Call ppc_elf_create_linker_section.
	(create_sdata_sym): Delete.
	(elf_allocate_pointer_linker_section): Rename from
	elf_create_pointer_linker_section.  Align section.
	(ppc_elf_check_relocs): Don't call ppc_elf_creat_linker_section
	directly here, or create_sdata_sym.  Set ref_regular on _SDA_BASE_
	and _SDA2_BASE_.
	(ppc_elf_size_dynamic_sections): Remove ATTRIBUTE_UNUSED on param.
	Remove unnecessary tests on _SDA_BASE_ sym.
	(maybe_strip_sdasym, ppc_elf_maybe_strip_sdata_syms): New functions.
	(ppc_elf_relocate_section): Tighten SDA reloc symbol section checks.
	* elf32-ppc.h (ppc_elf_set_sdata_syms): Delete.
	(ppc_elf_maybe_strip_sdata_syms): Declare.
ld/
	* emulparams/elf32ppccommon.sh (_SDA_BASE_, _SDA2_BASE_): Delete.
	* emultempl/ppc32elf.em (ppc_before_allocation): Call
	ppc_elf_maybe_strip_sdata_syms.
	* ldlang.c (size_input_section): Correct output_offset value
	for excluded input sections.
2014-05-20 13:13:23 +09:30
Alan Modra
6d00b59031 bfd target vector rationalisation
This renames the bfd targets to <cpu>_<format>_<other>_<endian>_vec.
So for example, bfd_elf32_ntradlittlemips_vec becomes
mips_elf32_ntrad_le_vec and hp300bsd_vec becomes m68k_aout_hp300bsd_vec.

bfd/
	* aix386-core.c, * aout-adobe.c, * aout-arm.c, * aout-ns32k.c,
	* aout-sparcle.c, * aout0.c, * aoutx.h, * armnetbsd.c, * bout.c,
	* cf-i386lynx.c, * cf-sparclynx.c, * cisco-core.c, * coff-alpha.c,
	* coff-apollo.c, * coff-arm.c, * coff-aux.c, * coff-go32.c,
	* coff-h8300.c, * coff-h8500.c, * coff-i386.c, * coff-i860.c,
	* coff-i960.c, * coff-m68k.c, * coff-m88k.c, * coff-mips.c,
	* coff-rs6000.c, * coff-sh.c, * coff-sparc.c, * coff-stgo32.c,
	* coff-svm68k.c, * coff-tic80.c, * coff-u68k.c, * coff-w65.c,
	* coff-we32k.c, * coff-x86_64.c, * coff-z80.c, * coff-z8k.c,
	* coff64-rs6000.c, * config.bfd, * configure.com, * configure.in,
	* demo64.c, * elf-m10200.c, * elf-m10300.c, * elf32-am33lin.c,
	* elf32-arc.c, * elf32-arm.c, * elf32-avr.c, * elf32-bfin.c,
	* elf32-cr16.c, * elf32-cr16c.c, * elf32-cris.c, * elf32-crx.c,
	* elf32-d10v.c, * elf32-d30v.c, * elf32-dlx.c, * elf32-epiphany.c,
	* elf32-fr30.c, * elf32-frv.c, * elf32-gen.c, * elf32-h8300.c,
	* elf32-hppa.c, * elf32-i370.c, * elf32-i386.c, * elf32-i860.c,
	* elf32-i960.c, * elf32-ip2k.c, * elf32-iq2000.c, * elf32-lm32.c,
	* elf32-m32c.c, * elf32-m32r.c, * elf32-m68hc11.c, * elf32-m68hc12.c,
	* elf32-m68k.c, * elf32-m88k.c, * elf32-mcore.c, * elf32-mep.c,
	* elf32-metag.c, * elf32-microblaze.c, * elf32-mips.c, * elf32-moxie.c,
	* elf32-msp430.c, * elf32-mt.c, * elf32-nds32.c, * elf32-nios2.c,
	* elf32-or1k.c, * elf32-pj.c, * elf32-ppc.c, * elf32-rl78.c,
	* elf32-rx.c, * elf32-s390.c, * elf32-score.c, * elf32-sh-symbian.c,
	* elf32-sh.c, * elf32-sh64.c, * elf32-sparc.c, * elf32-spu.c,
	* elf32-tic6x.c, * elf32-tilegx.c, * elf32-tilepro.c, * elf32-v850.c,
	* elf32-vax.c, * elf32-xc16x.c, * elf32-xgate.c, * elf32-xstormy16.c,
	* elf32-xtensa.c, * elf64-alpha.c, * elf64-gen.c, * elf64-hppa.c,
	* elf64-ia64-vms.c, * elf64-mips.c, * elf64-mmix.c, * elf64-ppc.c,
	* elf64-s390.c, * elf64-sh64.c, * elf64-sparc.c, * elf64-tilegx.c,
	* elf64-x86-64.c, * elfn32-mips.c, * elfnn-aarch64.c, * elfnn-ia64.c,
	* epoc-pe-arm.c, * epoc-pei-arm.c, * hp300bsd.c, * hp300hpux.c,
	* hppabsd-core.c, * hpux-core.c, * i386aout.c, * i386bsd.c,
	* i386dynix.c, * i386freebsd.c, * i386linux.c, * i386lynx.c,
	* i386mach3.c, * i386msdos.c, * i386netbsd.c, * i386os9k.c,
	* irix-core.c, * m68k4knetbsd.c, * m68klinux.c, * m68knetbsd.c,
	* m88kmach3.c, * m88kopenbsd.c, * mach-o-i386.c, * mach-o-x86-64.c,
	* makefile.vms, * mipsbsd.c, * mmo.c, * netbsd-core.c, * newsos3.c,
	* nlm32-alpha.c, * nlm32-i386.c, * nlm32-ppc.c, * nlm32-sparc.c,
	* ns32knetbsd.c, * osf-core.c, * pc532-mach.c, * pe-arm-wince.c,
	* pe-arm.c, * pe-i386.c, * pe-mcore.c, * pe-mips.c, * pe-ppc.c,
	* pe-sh.c, * pe-x86_64.c, * pei-arm-wince.c, * pei-arm.c,
	* pei-i386.c, * pei-ia64.c, * pei-mcore.c, * pei-mips.c, * pei-ppc.c,
	* pei-sh.c, * pei-x86_64.c, * ppcboot.c, * ptrace-core.c, * riscix.c,
	* sco5-core.c, * som.c, * sparclinux.c, * sparclynx.c,
	* sparcnetbsd.c, * sunos.c, * targets.c, * trad-core.c,
	* vax1knetbsd.c, * vaxbsd.c, * vaxnetbsd.c, * versados.c,
	* vms-alpha.c, * vms-lib.c: Rename bfd targets to
	<cpu>_<format>_<other>_<endian>_vec.  Adjust associated MY macros
	on aout targets.
	* configure: Regenerate.
binutils/
	* emul_aix.c: Update bfd target vector naming.
	* testsuite/binutils-all/objcopy.exp: Likewise.
ld/
	* emultempl/metagelf.em: Update bfd target vector naming.
	* emultempl/nios2elf.em: Likewise.
	* emultempl/spuelf.em: Likewise.
	* emultempl/tic6xdsbt.em: Likewise.
2014-05-02 20:09:40 +09:30
Richard Henderson
d1c109de72 Fix alpha-elf relaxation
ld/
	* emultempl/alphaelf.em (alpha_after_parse): Enable 2 relax passes.
bfd/
	* elf64-alpha.c (elf64_alpha_size_got_sections): New may_merge
	parameter; honor it and disable got merging when false.
	(elf64_alpha_relax_got_load): Do not relax to GPREL relocs during
	the first pass of relaxation.
	(elf64_alpha_relax_with_lituse): Likewise.  Move relaxed relocs to
	the end of the LITERAL+LITUSE chain.
	(elf64_alpha_relax_section): Only process LITERAL relocs during the
	second pass of relaxation.
2014-04-21 08:14:18 -07:00
Steve Ellcey
8056826a68 2014-04-16 Steve Ellcey <sellcey@mips.com>
* emultempl/elf32.em: Include safe-ctype.h.
2014-04-16 10:47:13 -07:00
Nick Clifton
edf84efc4e Remove remaining default manifest support.
* Makefile.am (default-manifest.o): Remove rule.
	(EMUL_EXTRA_BINARIES): Delete.
	(ALL_EMUL_EXTRA_BINARIES): Delete.
	(ld_new_DEPENDENCIES): Remove EMUL_EXTRA_BINARIES.
	(install-data-local): Remove EMUL_EXTRA_BINARIES.
	* Makefile.in: Regenerate.
	* configure.in (all_emul_extra_binaries): Delete.
	(EMUL_EXTRA_BINARIES): Remove.
	* configure: Regenerate.
	* configure.tgt (target_extra_binaries): Delete.
	* emultempl/default-manifest.rc: Delete.
	* ld.texinfo: Remove discussion of default manifest.
	* emulparams/i386pe.sh (DEFAULT_MANIFEST): Delete.
	* emulparams/i386pep.sh (DEFAULT_MANIFEST): Delete.
2014-04-09 17:12:30 +01:00
Alan Modra
e30d16e9ec Fix fallout from splitting ldbuildid.[ch] off elf32.em.
bfd/
	* libcoff.h: Regenerate.
ld/
	* emultempl/spuelf.em: Include safe-ctype.h, remove duplicate errno.h.
	* emultempl/nds32elf.em: Include bfd_stdint.h.
	* po/POTFILES.in: Regenerate.
2014-04-09 13:49:05 +09:30
Alan Modra
b4ab436423 ppc476 icache workaround fix for bctr
I got the ppc476 workaround wrong.  bctr (and bctrl) as the last
instruction in a page can hit the icache bug if the preceding mtctr
insn is close by, and the destination is in the first few instructions
on the next page.  This scenario can occur with code generated by gcc
to implement switch statements, or in code generated to call by
function pointer.

To prevent the bctr problem it is also necessary to remove other
instructions that otherwise would be safe.

bfd/
	* elf32-ppc.c (ppc_elf_relocate_section): Remove bctr from list
	of safe ppc476 insns at end of page.  Also remove non-branch insns.
	Expand comments.
ld/
	* emultempl/ppc32elf.em (no_zero_padding, ppc_finish): New functions.
	(LDEMUL_FINISH): Define.
2014-04-09 07:07:06 +09:30
Jon TURNEY
61e2488cd8 Add support for generating and inserting build IDs into COFF binaries.
* peXXigen.c (pe_print_debugdata): New function: Displays the
	contents of the debug directory and decodes codeview entries.
	(_bfd_XXi_swap_debugdir_in, _bfd_XXi_swap_debugdir_out)
	(_bfd_XXi_slurp_codeview_record, _bfd_XXi_write_codeview_record):
	Add functions for reading and writing debugdir and codeview
	records.
	* libpei.h (_bfd_XXi_swap_debugdir_in, _bfd_XXi_swap_debugdir_out)
	(_bfd_XXi_write_codeview_record): Add prototypes and macros.
	* libcoff-in.h (pe_tdata): Add build-id data.
	* libcoff.h: Regenerate.
	* coffcode.h (coff_write_object_contents): Run build_id
	after_write_object_contents hook.

	* pe.h (external_IMAGE_DEBUG_DIRECTORY, _CV_INFO_PDB70)
	(_CV_INFO_PDB20): Add structures and constants for debug directory
	and codeview records.
	* internal.h (internal_IMAGE_DEBUG_DIRECTORY, CODEVIEW_INFO):
	Add structures and constants for internal representation of debug
	directory and codeview records.

	* emultempl/elf32.em (id_note_section_size, read_hex, write_build_id):
	Move code for parsing build-id option and calculating the build-id to...
	* ldbuildid.c: New file.
	* ldbuildid.h: New file.
	* Makefile.am (CFILES, HFILES, OFILES, ld_new_SOURCES): Add new
	files.
	* Makefile.in: Regenerate.
	* ld.texinfo: Update --build-id description to mention COFF
	support.
	* NEWS: Mention support for COFF build ids.
	* emultempl/pe.em (gld${EMULATION_NAME}_handle_option):
	(pecoff_checksum_contents, write_build_id, setup_build_id)
	(gld_${EMULATION_NAME}_after_open):  Handle and implement
	build-id option.
	* emultempl/pep.em: Likewise.
2014-04-08 10:59:43 +01:00
Nick Clifton
76f0cad6f4 This is a fix for PR ld/16744 which showed that an object file linked with -r and -z [no]execstack
would not honour the [no]execstack.  Fully linked binaries use a special segment to indicate the
state of the stack, but relocatable object files only have sections, and .note.GNU-stack was not
being created.

	* emultempl/elf32.em (_after_open): Create a .note.GNU-stack
	section when performing a relocatable link with -z [no]execstack
	specified.
2014-03-31 13:14:44 +01:00
Chris Faylor
d0e6d77b3f 2014-03-21 Christopher Faylor <me.binutils2014@cgf.cx>
* ld.texinfo: Document change in handling of --enable-auto-image-base.
	* emultempl/pe.em (pe_auto_image_base): Set to default base.
	(gld_${EMULATION_NAME}_list_options): Change usage message to reflect
	optional --enable-auto-image-base argument.
	(gld${EMULATION_NAME}_handle_option): Handle optional
	--enable-auto-image-base argument.
	(compute_dll_image_base): Eliminate constant.  Use pe_auto_image_base.
2014-03-21 13:33:43 -04:00
Nick Clifton
1d63324c56 Improve .rsrc section merging with better handling of the alignment adjustments
made between merged .rsrc sections.

	* peXXigen.c (rsrc_align): New function.  Attempts to cope with
	alignment variances when .rsrc sections are merged.
	(rsrc_process_section): Use rsrc_align.

	* Makefile.am (default-manifest.o): Use WINDRES_FOR_TARGET.
	* Makefile.in: Regenerate.
	* emultempl/default-manifest.rc: Fix typo.
	* scripttempl/pe.sc (R_RSRC): Fix default-manifest exclusion.
	(.rsrc): Add SUBALIGN(4).
	* scripttempl/pep.sc: Likewise.
2014-03-19 08:51:20 +00:00
Alan Modra
d4ae5fb0b5 Remove search path from -l:namespec DT_NEEDED
For libraries without a soname, -l:libfoo.so set DT_NEEDED to the search
dir plus filename, while gold and -lfoo just use the filename.  This
patch fixes the inconsistency.

	* ldlang.h (full_name_provided): New input flag.
	* ldlang.c (new_afile): Don't use lang_input_file_is_search_file_enum
	for -l:namespec.  Instead use lang_input_file_is_l_enum with
	full_name_provided flag.
	* ldlfile.c (ldfile_open_file_search): Don't complete lib name if
	full_name_provided flag is set.
	* emultempl/elf32.em (gld${EMULATION_NAME}_open_dynamic_archive):
	Handle full_name_provided libraries.  Tidy EXTRA_SHLIB_EXTENSION
	support.  Set DT_NEEDED for -l:namespec as namespec.
	* emultempl/aix.em (ppc_after_open_output): Handle full_name_provided.
	* emultempl/linux.em (gld${EMULATION_NAME}_open_dynamic_archive):
	Don't handle full_name_provided libraries.
	* emultempl/pe.em (gld${EMULATION_NAME}_open_dynamic_archive): Ditto.
	* emultempl/pep.em (gld${EMULATION_NAME}_open_dynamic_archive): Ditto.
	* emultempl/vms.em (gld${EMULATION_NAME}_open_dynamic_archive): Ditto.
2014-03-14 12:54:24 +10:30
Alan Modra
4b95cf5c0c Update copyright years 2014-03-05 22:16:15 +10:30
Yuri Gribov
1db37fe627 This patch adds support for ARM PLT entries that support a full 32-bit offset range.
Enabled via the use of a new linker command line option: --long-plt.

	* bfd-in.h: Add export of bfd_elf32_arm_use_long_plt.
	* bfd-in2.h: Regenerate.
	* elf32-arm.c (elf32_arm_plt_entry_long): New array.
	(elf32_arm_link_hash_table_create): Set plt_entry_size to 16 if
	using long PLT entries.
	(bfd_elf32_arm_use_long_plt): New function.
	(elf32_arm_populate_plt_entry): Add support for long PLT entries.

	* emultempl/armelf.em (OPTION_LONG_PLT): Define.
	(PARSE_AND_LIST_LONGOPTS): Add long-plt.
	(PARSE_AND_LIST_OPTIONS): Likewise.
	(PARSE_AND_LIST_ARGS_CASES): Handle long-plt.
	* ld.texinfo: Document --long-plt.

	* ld-arm/long-plt-format.s: New test case.
	* ld-arm/long-plt-format.d: Expected disassembly.
	* ld-arm/arm-elf.exp: Run the new test.
2014-02-27 14:35:37 +00:00
Nick Clifton
5063daf735 This patch adds a default manifest in to the final links performed by the Cygwin and MinGW targets.
The manifest is necessary in order for the linked binaries to be executed in a Windows 8 environment.

The manifest is added using a linker script so that this feature will be compiler-neutral.  The resource
merging code in the linker means that if an application provides its own manifest then the default
manifest will be ignored.

	* configure.in (all_emul_extra_binaries): New variable.  Populated
	by invoking configure.tgt.
	(EMUL_EXTRA_BINARIES): New substitution.
	* configure: Regenerate.
	* configure.tgt (target_extra_binaries): New variable.  Set to
	default-manifest.o for Cygwin and MinGW targets.
	* Makefile.am (EMUL_EXTRA_BINARIES): New variable.  Initialised
	by the configure script.
	(ALL_EMUL_EXTRA_BINARIES): New variable.
	(default-manifest.o): New rule to build the default manifest.
	(ld_new_DEPENDENCIES): Add EMUL_EXTRA_BINARIES.
	(install-data-local): Add EMUL_EXTRA_BINARIES.
	* Makefile.in: Regenerate.
	* ld.texinfo: Document default manifest support.
	* emulparams/i386pe.sh (DEFAULT_MANIFEST): Define.
	* emulparams/i386pep.sh (DEFAULT_MANIFEST): Define.
	* emultempl/default-manifest.rc: New file.
	* scripttempl/pe.sc (R_RSRC): Include DEFAULT_MANIFEST, if defined.
	* scripttempl/pep.sc (R_RSRC): Likewise.

	* ld-pe/longsecn-1.d: Allow for extra sections.
	* ld-pe/longsecn-2.d: Likewise.
	* ld-pe/longsecn.d: Likewise.
	* ld-pe/secrel.d: Likewise.
2014-02-27 14:13:43 +00:00
Alan Modra
db434ba03e Fix ELF ppc32 targets that don't use ppc32elf.em
5446cbdf82 broke powerpc-lynxos,
powerpc-netware, powerpc-windiss and powerpc-vxworks.

bfd/
	* elf32-ppc.c (ppc_elf_link_hash_table_create): Provide default
	params for targets that don't use ppc32elf.em.
ld/
	* emulparams/elf32ppcvxworks.sh: Source plt_unwind.sh and
	use ppc32elf.em.
	* emultempl/ppc32elf.em (ppc_after_open): Don't compile for
	vxworks.
	(LDEMUL_AFTER_OPEN): Don't set for vxworks.
	(PARSE_AND_LIST_LONGOPTS, PARSE_AND_LIST_OPTIONS): Exclude
	-secure-plt, -bss-plt and -sdata-got when vxworks.
2014-02-27 23:39:01 +10:30
Alan Modra
7d4c687d56 Control powerpc64-ld provision of register save/restore
This patch allows the user to override powerpc64-ld's default for
providing linker generated register save and restore functions as used
by gcc -Os code.  Normally these are not provided by ld -r, so Linux
kernel modules have needed to include their own copies.

bfd/
	* elf64-ppc.h (struct ppc64_elf_params): Add save_restore_funcs.
	* elf64-ppc.c (ppc64_elf_func_desc_adjust): Use it to control
	provision of out-of-line register save/restore routines.
ld/
	* emultempl/ppc64elf.em (params): Init new field.
	(ppc_create_output_section_statements): Set params.save_restore_funcs
	default.
	(PARSE_AND_LIST_*): Add support for --save-restore-funcs and
	--no-save-restore-funcs.
2014-02-19 14:53:50 +10:30
Alan Modra
e7d1c40ce5 Consolidate ppc64 ld/bfd communication
Moves assorted variables used to communicate between ld and bfd into
a struct, hooks it into the bfd link_hash_table early, and removes
all other places where such variables were passed piecemeal.

bfd/
	* elf64-ppc.h (struct ppc64_elf_params): Define.
	(ppc64_elf_init_stub_bfd, ppc64_elf_edit_opd, ppc64_elf_tls_setup,
	ppc64_elf_setup_section_lists, ppc64_elf_size_stubs,
	ppc64_elf_build_stubs): Update prototype.
	* elf64-ppp.c (struct ppc_link_hash_table): Add params, delete other
	fields now in params.  Adjust code throughout file.
	(ppc64_elf_init_stub_bfd): Delete "abfd" parameter, add "params".
	Save params pointer in htab.
	(ppc64_elf_edit_opd, ppc64_elf_tls_setup,
	ppc64_elf_setup_section_lists, ppc64_elf_size_stubs,
	ppc64_elf_build_stubs): Remove parameters now in "params".
ld/
	* emultemps/ppc64elf.em (params): New static struct replacing
	various other static vars.  Adjust code throughout file.
2014-02-17 17:11:11 +10:30
Alan Modra
668e22e51b ppc476 workaround for ld -r fixes
This fixes the glaring error that the ppc476 workaround wasn't
actually enabled for ld -r, and adjusts relocations to match moved
code.

bfd/
	* elf32-ppc.c (ppc_elf_relocate_section): Move relocs on insns
	patched for ppc476 workaround.  Reapply branch taken/not taken
	relocs.
ld/
	* emultempl/ppc32elf.em (ppc_after_open_output): Really enable
	ppc476 workaround for ld -r.
2014-02-17 17:00:19 +10:30
Alan Modra
795bc6b3ea Enable ppc476 workaround for ld -r.
The Linux kernel builds modules using ld -r.  These might need the
ppc476 workaround, so enable it for ld -r if sections have sufficient
alignment to tell location within a page.

bfd/
	* elf32-ppc.c (ppc_elf_relax_section): Enable ppc476 workaround
	for ld -r, when code sections are sufficiently aligned.
	* elf32-ppc.h (struct ppc_elf_params): Delete pagesize.  Add
	pagesize_p2.
ld/
	* emultempl/ppc32elf.em (pagesize): New static var.
	(ppc_after_open_output): Set params.pagesize_p2 from pagesize.
	(PARSE_AND_LIST_ARGS_CASES): Adjust to use pagesize.
2014-02-12 22:10:09 +10:30
Alan Modra
5446cbdf82 ppc476 icache bug workaround
This implements a work-around for an icache bug on 476 that can cause
execution of stale instructions when control falls through from one
page to the next.  The idea is to prevent such fall-through by
replacing the last instruction on a page with a branch to a patch
area containing the instruction, then branch to the next page.

The patch also fixes a number of bugs in the existing support for long
branch trampolines.

bfd/
	* elf32-ppc.c (struct ppc_elf_link_hash_table): Add params.
	Delete emit_stub_syms, no_tls_get_addr_opt.  Update all uses.
	(ppc_elf_link_params): New function.
	(ppc_elf_create_glink): Align .glink to 64 bytes for ppc476
	workaround.
	(ppc_elf_select_plt_layout): Remove plt_style and emit_stub_syms
	parameters.  Use htab->params instead.
	(ppc_elf_tls_setup): Remove no_tls_get_addr_opt parameter.
	(ppc_elf_size_dynamic_sections): Align __glink_PLTresolve to
	64 bytes for ppc476 workaround.
	(struct ppc_elf_relax_info): New.
	(ppc_elf_relax_section): Exclude linker created sections and
	those too small to hold one instruction.  Don't add another
	branch 	around trampolines on later relax passes.  Don't
	generate trampolines for undefined symbols when !relocatable,
	nor for plugin symbols.  Allocate space for ppc476 workaround
	patch area.  Free fixups on error return path.
	(ppc_elf_relocate_section): Handle ppc476 workaround patching.
	* elf32-ppc.h (struct ppc_elf_params): New.
	(ppc_elf_select_plt_layout, ppc_elf_tls_setup): Update prototype.
	(ppc_elf_link_params): Declare.
	* section.c (SEC_INFO_TYPE_TARGET): Define.
	* bfd-in2.h: Regenerate.
ld/
	* emultempl/ppc32elf.em (no_tls_get_addr_opt, emit_stub_syms)
	plt_style): Delete.  Adjust all refs to instead use..
	(params): ..this.  New variable.
	(ppc_after_open_output): New function.  Tweak params and pass to
	ppc_elf_link_params.
	(ppc_after_open): Adjust ppc_elf_select_plt_layout call.
	(ppc_before_allocation): Adjust ppc_elf_tls_setup call.  Enable
	relaxation for ppc476 workaround.
	(PARSE_AND_LIST_*): Add --{no-,}ppc476-workaround support.
	(LDEMUL_CREATE_OUTPUT_SECTION_STATEMENTS): Define.
2014-02-03 20:24:20 +10:30
Hans-Peter Nilsson
0a09fb4a09 Fix MMIX build breakage from bfd_set_section_vma change.
* emultempl/mmix-elfnmmo.em (mmix_after_allocation): Fix typo in
	call to bfd_set_section_vma exposed by recent bfd_set_section_vma
	change.
2014-02-01 01:11:28 +01:00
Sandra Loosemore
78058a5e4f Nios II CALL26 linker relaxation
2014-01-30  Sandra Loosemore  <sandra@codesourcery.com>

	bfd/
	* bfd-in2.h: Update from reloc.c.
	* elf32-nios2.c: Include elf32-nios2.h.
	(elf_nios2_howto_table_rel): Add entry for R_NIOS2_CALL26_NOAT.
	(nios2_reloc_map): Likewise.
	(enum elf32_nios2_stub_type): Declare.
	(struct elf32_nios2_stub_hash_entry): Declare.
	(nios2_stub_hash_entry, nios2_stub_hash_lookup): New macros.
	(struct elf32_nios2_link_hash_entry): Add hsh_cache field.
	(struct elf32_nios2_link_hash_table): Add new fields bstab,
	stub_bfd, add_stub_section, layout_sections_again, stub_group,
	bfd_count, top_index, input_list, all_local_syms.
	(nios2_call26_stub_entry): New.
	(nios2_elf32_install_imm16): Move up in file.
	(nios2_elf32_install_data): Move up in file.
	(hiadj): Move up in file.
	(stub_hash_newfunc): New.
	(link_hash_newfunc): Initialize hsh_cache field.
	(STUB_SUFFIX): New.
	(nios2_stub_name): New.
	(nios2_get_stub_entry): New.
	(nios2_add_stub): New.
	(nios2_elf32_setup_section_lists): New.
	(nios2_elf32_next_input_section): New.
	(CALL26_SEGMENT): New.
	(MAX_STUB_SECTION_SIZE): New.
	(group_sections): New.
	(nios2_type_of_stub): New.
	(nios2_build_one_stub): New.
	(nios2_size_one_stub): New.
	(get_local_syms): New.
	(nios2_elf32_size_stubs): New.
	(nios2_elf32_build_stubs): New.
	(nios2_elf32_do_call26_relocate): Correct CALL26 overflow test.
	(nios2_elf32_relocate_section): Handle R_NIOS2_CALL26_NOAT.  Add
	trampolines for R_NIOS2_CALL26 stubs.
	(nios2_elf32_check_relocs): Handle R_NIOS2_CALL26_NOAT.
	(nios2_elf32_gc_sweep_hook): Likewise.
	(nios2_elf32_link_hash_table_create): Initialize the stub hash table.
	(nios2_elf32_link_hash_table_free): New.
	(bfd_elf32_bfd_link_hash_table_free): Define.
	* elf32-nios2.h: New file.
	* libbfd.h: Update from reloc.c.
	* reloc.c (BFD_RELOC_NIOS2_CALL26_NOAT): New.

	gas/
	* config/tc-nios2.c (md_apply_fix): Handle BFD_RELOC_NIOS2_CALL26_NOAT.
	(nios2_assemble_args_m): Likewise.
	(md_assemble): Likewise.

	gas/testsuite/
	* gas/nios2/call26_noat.d: New.
	* gas/nios2/call26_noat.s: New.
	* gas/nios2/call_noat.d: New.
	* gas/nios2/call_noat.s: New.

	include/elf/
	* nios2.h (elf_nios2_reloc_type): Add R_NIOS2_CALL26_NOAT.

	ld/
	* Makefile.am (enios2elf.c, enios2linux.c): Update dependencies.
	* Makefile.in: Regenerated.
	* emulparams/nios2elf.sh (EXTRA_EM_FILE): Set.
	* emulparams/nios2linux.sh (EXTRA_EM_FILE): Set.
	* emultempl/nios2elf.em: New file.
	* gen-doc.texi (NIOSII): Set.
	* ld.texinfo (NIOSII): Set.

	ld/testsuite/
	* ld-nios2/relax_call26.s: New.
	* ld-nios2/relax_call26_boundary.ld: New.
	* ld-nios2/relax_call26_boundary.s: New.
	* ld-nios2/relax_call26_boundary_c8.d: New.
	* ld-nios2/relax_call26_boundary_cc.d: New.
	* ld-nios2/relax_call26_boundary_d0.d: New.
	* ld-nios2/relax_call26_boundary_d4.d: New.
	* ld-nios2/relax_call26_boundary_d8.d: New.
	* ld-nios2/relax_call26_boundary_dc.d: New.
	* ld-nios2/relax_call26_boundary_f0.d: New.
	* ld-nios2/relax_call26_boundary_f4.d: New.
	* ld-nios2/relax_call26_boundary_f8.d: New.
	* ld-nios2/relax_call26_boundary_fc.d: New.
	* ld-nios2/relax_call26_cache.d: New.
	* ld-nios2/relax_call26_cache.ld: New.
	* ld-nios2/relax_call26_cache.s: New.
	* ld-nios2/relax_call26_multi.d: New.
	* ld-nios2/relax_call26_multi.ld: New.
	* ld-nios2/relax_call26_norelax.d: New.
	* ld-nios2/relax_call26_shared.d: New.
	* ld-nios2/relax_call26_shared.ld: New.
2014-01-30 17:47:07 -08:00
H.J. Lu
d85e71fec0 Improve orphaned TLS section handling
ld/

	PR ld/16498
	* emultempl/elf32.em (gld${EMULATION_NAME}_place_orphan): Improve
	orphaned TLS section handling.

ld/testsuite/

	PR ld/16498
	* ld-elf/pr16498a.d: New file.
	* ld-elf/pr16498a.s: Likewise.
	* ld-elf/pr16498a.t: Likewise.
2014-01-24 08:56:07 -08:00
Guy Martin
24ef1aa73e Fix duplicate output section statement lookup
Tie output section statements to their associated output section via
output section userdata.  This allows us to avoid hash lookups which
are slower and fail when multiple output sections have the same name.

	* ldlang.h (lang_output_section_get): Define.
	* ldlang.c (lang_output_section_get): Likewise.
	(init_os): Set the output_section userdata to the output
	section statement.
	* emultempl/hppaelf.em: Use lang_output_section_get instead of
	lang_output_section_find where applicable.
	* emultempl/aarch64elf.em: Likewise.
	* emultempl/aix.em: Likewise.
	* emultempl/armelf.em: Likewise.
	* emultempl/m68hc1xelf.em: Likewise.
	* emultempl/metagelf.em: Likewise.
	* emultempl/mipself.em: Likewise.
	* emultempl/ppc64elf.em: Likewise.
	* emultempl/spuelf.em: Likewise.
2014-01-20 14:21:36 +10:30
Alan Modra
7225345dbb Allow ld target customiser script to force on disk scripts.
Mucking with EMULATION_LIBPATH has unwanted side effects.  Allow nds32
emulparams scripts to disable compiled-in scripts naturally, by
setting COMPILE_IN=no.

	* genscripts.sh (COMPILE_IN): Don't set if already set.
	* emulparams/nds32elf.sh: Don't clear EMULATION_LIBPATH, set
	COMPILE_IN=no.
	* emulparams/nds32elf16m.sh: Likewise.
	* emulparams/nds32elf_linux.sh: Likewise.
	* emultempl/aix.em: Test COMPILE_IN value is "yes".
	* emultempl/armcoff.em: Likewise.
	* emultempl/elf32.em: Likewise.
	* emultempl/generic.em: Likewise.
	* emultempl/gld960.em: Likewise.
	* emultempl/gld960c.em: Likewise.
	* emultempl/linux.em: Likewise.
	* emultempl/lnk960.em: Likewise.
	* emultempl/m68kcoff.em: Likewise.
	* emultempl/sunos.em: Likewise.
	* emultempl/ticoff.em: Likewise.
2014-01-17 10:41:49 +10:30
H.J. Lu
f9c316c4d7 Silence uninitialized warning on ehdr_start_save
Older GCC, like 4.1/4.2, will issue an uninitialized warning on
ehdr_start_save.  This patch silences by using

struct bfd_link_hash_entry ehdr_start_save = ehdr_start_save;

	* emultempl/elf32.em (gld${EMULATION_NAME}_before_allocation):
	Silence uninitialized warning on ehdr_start_save with older
	GCC.
2014-01-15 07:43:19 -08:00
Alan Modra
4199e3b866 non-PIC references to __ehdr_start in pie and shared
Rather than hacking every backend to not discard dynamic relocations
against an undefined hidden __ehdr_start, make it appear to be defined
early.  We want __ehdr_start hidden before size_dynamic_sections so
that it isn't put in .dynsym, but we do need the dynamic relocations
for a PIE or shared library with a non-PIC reference.  Defining it
early is wrong if we don't actually define the symbol later to its
proper value.  (In some cases we want to leave the symbol undefined,
for example, when the ELF header isn't loaded, and we don't have this
infomation available in before_allocation.)

ld/
	* emultempl/elf32.em (gld${EMULATION_NAME}_before_allocation): Define
	__ehdr_start before size_dynamic_sections and restore afterwards.
ld/testsuite/
	* ld-elf/ehdr_start-shared.d: New.
	* ld-elf/ehdr_start-userdef.d: xfail frv.
	* ld-elf/ehdr_start-weak.d: Likewise.
	* ld-elf/ehdr_start.d: Likewise.
2014-01-15 22:23:16 +10:30
Kuan-Lin Chen
35c081572f Add support for Andes NDS32:
BFD:
	* Makefile.am (BFD32_BACKENDS, BFD32_BACKENDS_CFILES): Add nds32
	files.
	* Makefile.in: Regenerate.
	* archures.c (bfd_nds32_arch): Add nds32 target.
	* bfd-in2.h: Regenerate.
	* config.bfd (nds32*le-*-linux): Add bfd_elf32_nds32lelin_vec
	and bfd_elf32_nds32belin_vec.
	(nds32*be-*-linux*): Likewise.
	(nds32*le-*-*): Add bfd_elf32_nds32le_vec and bfd_elf32_nds32be_vec.
	(nds32*be-*-*): Likewise.
	* configure.in (bfd_elf32_nds32be_vec): Add elf32-nds32.lo.
	(bfd_elf32_nds32le_vec): Likewise.
	(bfd_elf32_nds32belin_vec): Likewise.
	(bfd_elf32_nds32lelin_vec): Likewise.
	* configure: Regenerate.
	* cpu-nds32.c: New file for nds32.
	* elf-bfd.h: Add NDS32_ELF_DATA.
	* elf32-nds32.c: New file for nds32.
	* elf32-nds32.h: New file for nds32.
	* libbfd.h: Regenerate.
	* reloc.c: Add relocations for nds32.
	* targets.c (bfd_elf32_nds32be_vec): New declaration for nds32.
	(bfd_elf32_nds32le_vec): Likewise.
	(bfd_elf32_nds32belin_vec): Likewise.
	(bfd_elf32_nds32lelin_vec): Likewise.

BINUTILS:
	* readelf.c: Include elf/nds32.h
	(guess_is_rela): Add case for EM_NDS32.
	(dump_relocations): Add case for EM_NDS32.
	(decode_NDS32_machine_flags): New.
	(get_machine_flags): Add case for EM_NDS32.
	(is_32bit_abs_reloc): Likewise.
	(is_16bit_abs_reloc): Likewise.
	(process_nds32_specific): New.
	(process_arch_specific): Add case for EM_NDS32.
	* NEWS: Announce Andes nds32 support.
	* MAINTAINERS: Add nds32 maintainers.
  TESTSUITE:
	* binutils-all/objdump.exp: Add NDS32 cpu.
	* binutils-all/readelf.r: Skip extra reloc created by NDS32.

GAS:
	* Makefile.am (TARGET_CPU_CFILES): Add config/tc-nds32.c.
	(TARGET_CPU_HFILES): Add config/tc-nds32.h.
	* Makefile.in: Regenerate.
	* configure.in (nds32): Add nds32 target extension config support.
	* configure.tgt : Add case for nds32-*-elf* and nds32-*-linux*.
	* configure: Regenerate.
	* config/tc-nds32.c: New file for nds32.
	* config/tc-nds32.h: New file for nds32.
	* doc/Makefile.am (CPU_DOCS): Add c-nds32.texi.
	* doc/Makefile.in: Regenerate.
	* doc/as.texinfo: Add nds32 options.
	* doc/all.texi: Set NDS32.
	* doc/c-nds32.texi: New file dor nds32 document.
	* NEWS: Announce Andes nds32 support.
  TESTSUITE:
	* gas/all/gas.exp: Add expected failures for NDS32.
	* gas/elf/elf.exp: Likewise.
	* gas/lns/lns.exp: Use alternate test.
	* gas/macros/irp.d: Skip for NDS32.
	* gas/macros/macros.exp: Skip some tests for the NDS32.
	* gas/macros/rept.d: Skip for NDS32.
	* gas/macros/test3.d: Skip for NDS32.
	* gas/nds32: New directory.
	* gas/nds32/alu-1.s: New test.
	* gas/nds32/alu-1.d: Likewise.
	* gas/nds32/alu-2.s: Likewise.
	* gas/nds32/alu-2.d: Likewise.
	* gas/nds32/br-1.d: Likewise.
	* gas/nds32/br-1.s: Likewise.
	* gas/nds32/br-2.d: Likewise.
	* gas/nds32/br-2.s: Likewise.
	* gas/nds32/ji-jr.d: Likewise.
	* gas/nds32/ji-jr.s: Likewise.
	* gas/nds32/ls.d: Likewise.
	* gas/nds32/ls.s: Likewise.
	* gas/nds32/lsi.d: Likewise.
	* gas/nds32/lsi.s: Likewise.
	* gas/nds32/to-16bit-v1.d: Likewise.
	* gas/nds32/to-16bit-v1.s: Likewise.
	* gas/nds32/to-16bit-v2.d: Likewise.
	* gas/nds32/to-16bit-v2.s: Likewise.
	* gas/nds32/to-16bit-v3.d: Likewise.
	* gas/nds32/to-16bit-v3.s: Likewise.
	* gas/nds32/nds32.exp: New test driver.

LD:
	* Makefile.am (ALL_EMULATION_SOURCES): Add nds32 target.
	* Makefile.in: Regenerate.
	* configure.tgt: Add case for nds32*le-*-elf*, nds32*be-*-elf*,
	nds32*le-*-linux-gnu*, and nds32*be-*-linux-gnu*.
	* emulparams/nds32belf.sh: New file for nds32.
	* emulparams/nds32belf_linux.sh: Likewise.
	* emulparams/nds32belf16m.sh: Likewise.
	* emulparams/nds32elf.sh: Likewise.
	* emulparams/nds32elf_linux.sh: Likewise.
	* emulparams/nds32elf16m.sh: Likewise.
	* emultempl/nds32elf.em: Likewise.
	* scripttempl/nds32elf.sc}: Likewise.
	* gen-doc.texi: Set NDS32.
	* ld.texinfo: Set NDS32.
	* NEWS: Announce Andes nds32 support.
  TESTSUITE:
	* lib/ld-lib.exp: Add NDS32 to list of targets that do not support
	shared library generation.
	* ld-nds32: New directory.
	* ld-nds32/branch.d: New test.
	* ld-nds32/branch.ld: New test.
	* ld-nds32/branch.s: New test.
	* ld-nds32/diff.d: New test.
	* ld-nds32/diff.ld: New test.
	* ld-nds32/diff.s: New test.
	* ld-nds32/gp.d: New test.
	* ld-nds32/gp.ld: New test.
	* ld-nds32/gp.s: New test.
	* ld-nds32/imm.d: New test.
	* ld-nds32/imm.ld: New test.
	* ld-nds32/imm.s: New test.
	* ld-nds32/imm_symbol.s: New test.
	* ld-nds32/relax_jmp.d: New test.
	* ld-nds32/relax_jmp.ld: New test.
	* ld-nds32/relax_jmp.s: New test.
	* ld-nds32/relax_load_store.d: New test.
	* ld-nds32/relax_load_store.ld: New test.
	* ld-nds32/relax_load_store.s: New test.
	* ld-nds32/nds32.exp: New file.

OPCODES:
	* Makefile.am (TARGET_LIBOPCODES_CFILES): Add nds32-asm.c
	and nds32-dis.c.
	* Makefile.in: Regenerate.
	* configure.in: Add case for bfd_nds32_arch.
	* configure: Regenerate.
	* disassemble.c (ARCH_nds32): Define.
	* nds32-asm.c: New file for nds32.
	* nds32-asm.h: New file for nds32.
	* nds32-dis.c: New file for nds32.
	* nds32-opc.h: New file for nds32.

INCLUDE:
	* dis-asm.h (print_insn_nds32): Add nds32 target.
	* elf/nds32.h: New file for nds32.
	* opcode/nds32.h: New file for nds32.
2013-12-13 11:52:32 +00:00