abbrev_base is independent of abbrev_size. We should use abbrev_base +
abbrev_size to check abbrev section size.
* dwarf.c (process_debug_info): Properly check abbrev size.
PR binutils/17531
* dwarf.c (process_debug_info): Check for abbrev_base being larger
than the section size.
(process_cu_tu_index): Use xcalloc2 to allocate the CU and TU
arrays.
(xcalloc2): New function. Like xcalloc, but checks for overflow.
* dwarf.h (xcalloc2): Prototype.
PR binutils/17531
* dwarf.c (alloc_num_debug_info_entries): New variable.
(process_debug_info): Set it. Use it to avoid displaying
attributes for which there is no info.
(display_debug_abbrev): Check that the debug_info_entry index is
valid before using it.
(display_loc_list_dwo): Likewise.
(process_cu_tu_index): Add range check for an overlarge dw_sect
value.
(free_debug_memory): Reset alloc_num_debug_info_entries.
* readelf.c (slurp_ia64_unwind_table): Warn if the reloc could not
be indentified.
(dynamic_section_mips_val): Warn if the timestamp is invalid.
(print_mips_got_entry): Add a data_end parameter. Warn if a read
would go beyond the end of the data, and return an error value.
(process_mips_specific): Do not read options from beyond the end
of the section.
Correct code to display optional data at the end of an option.
Warn if there are too many GOT symbols.
Update calls to print_mips_got_entry, and handle error returns.
PR binutils/17531
* dwarf.c (decode_location_expression): Check for an out of range
value for a DW_OP_GNU_entry_value expression.
(display_debug_lines_raw): Check for a partial
.debug_line. section being encountered without a prior, full
.debug.line section.
(display_debug_lines_decoded): Likewise. Also check for
li_line_range being zero.
(display_debug_pubnames_worker): Check for an invalid pn_length
field.
(read_cie): Add range checks.
* elfcomm.c (setup_archive): Check for a negative longnames_size.
Also fix a place where %lld was wrongly used to print a dwarf_vma.
* configure.ac: Check for long long and sizes of long long and long.
* elfcomm.h (HOST_WIDEST_INT): Test HAVE_LONG_LONG in place of
__STDC_VERSION__ and __GNUC__.
* strings.c (print_strings): Likewise.
* dwarf.c (DWARF_VMA_FMT, DWARF_VMA_FMT_LONG): Likewise.
(read_debug_line_header): Use dwarf_vmatoa to print warning.
* configure: Regenerate.
* config.in: Regenerate.
PR binutils/17531
* dwarf.c (display_debug_frames): Check for a negative
augmentation data length.
(display_gdb_index): Check for invalid offsets.
* elfcomm.c (process_archive_index_and_symbols): Check for an
index number that overflows when multiplied by the ar index size.
* readelf.c (dump_ia64_unwind): Add range checks.
(slurp_ia64_unwind_table): Change to a boolean function. Add
range checks.
(process_version_sections): Add range checks.
(get_symbol_version_string): Add check for missing section
headers.
PR binutils/17512
* dwarf.h (struct dwarf_section): Add user_data field.
* dwarf.c (frame_need_space): Check for an over large register
number.
(display_debug_frames): Check the return value from
frame_need_space. Check for a CFA expression that is so long the
start address wraps around.
(debug_displays): Initialise the user_data field.
* objdump.c (load_specific_debug_section): Save the BFD section
pointer in the user_data field of the dwarf_section structure.
(free_debug_section): Update BFD section data when freeing section
contents.
* readelf.c (load_specific_debug_section): Initialise the
user_data field.
* archive.c (do_slurp_coff_armap): Add range checks to prevent
running off the end of the string table.
* compress.c (bfd_get_full_section_contents): Return a NULL
pointer for zero sized sections. Do not attempt to copy a buffer
onto itself.
* elf-attrs.c (_bfd_elf_parse_attributes): Check for an empty
header. Add range checks to avoid running off the end of the
section.
* elf.c (bfd_elf_get_str_section): Seek before allocating so that
if the seek fails, no memory is allocated.
(bfd_elf_string_from_elf_section): Do not allocate a string from a
non string section. It only leads to trouble later on.
(_bfd_elf_print_private_bfd_data): Check for there being too
little external dynamic data.
(bfd_section_from_shdr): Replace assertion with a failure mode.
(bfd_section_from_shdr): When walking a loaded group section use
the internal structure size, not the external size. Check for the
group section being empty.
* elf32-i386.c (elf_i386_rtype_to_howto): Replace assertion with a
failure mode.
* elfcode.h (elf_slurp_reloc_table): Likewise.
* reloc.c (bfd_perform_relocation): Avoid seg-fault if the howto
parameter is NULL.
PR binutils/17531
* dwarf.c (process_cu_tu_index): Check for an out of range row
index.
* elfcomm.c (adjust_relative_path): Change name_len parameter to
an unsigned long. Check for path length overflow.
(process_archive_index_and_symbols): Check for invalid header
size.
(setup_archive): Add checks for invalid archives.
(get_archive_member_name): Add range checks.
* elfcomm.h (adjust_relative_path): Update prototyoe.
* readelf.c (process_archive): Add range checks.
PR binutils/17512
* dwarf.c (display_block): Do nothing if the block starts after
the end of the buffer.
(read_and_display_attr_value): Add range checks.
(struct Frame_Chunk): Make the ncols and ra fields unsigned.
(frame_need_space): Test for an ncols of zero.
(read_cie): Fail if the augmentation data extends off the end of
the buffer.
(display_debug_frames): Add checks for read_cie failing. Add
range checks.
* coff-h8300.c (rtype2howto): Replace abort with returning a NULL
value.
* coff-h8500.c (rtype2howto): Likewise.
* coff-tic30.c (rtype2howto): Likewise.
* coff-z80.c (rtype2howto): Likewise.
* coff-z8k.c (rtype2howto): Likewise.
* coff-ia64.c (RTYPE2HOWTO): Always return a valid howto.
* coff-m68k.c (m68k_rtype2howto): Return a NULL howto if none
could be found.
* coff-mcore.c (RTYPE2HOWTO): Add range checking.
* coff-w65.c (rtype2howto): Likewise.
* coff-we32k.c (RTYPE2HOWTO): Likewise.
* pe-mips.c (RTYPE2HOWTO): Likewise.
* coff-x86_64.c (coff_amd64_reloc): Likewise. Replace abort with
an error return.
* coffcode.h (coff_slurp_reloc_table): Allow the rel parameter to
be unused.
* coffgen.c (make_a_section_from_file): Check the length of a
section name before testing to see if it is a debug section name.
(coff_object_p): Zero out any uninitialised bytes in the opt
header.
* ecoff.c (_bfd_ecoff_slurp_symbolic_info): Test for the raw
source being empty when there are values to be processed.
(_bfd_ecoff_slurp_symbol_table): Add range check.
* mach-o.c (bfd_mach_o_canonicalize_one_reloc): Likewise.
(bfd_mach_o_mangle_sections): Move test for too many sections to
before the allocation of the section table.
(bfd_mach_o_read_symtab_strtab): If the read fails, free the
memory and nullify the symbol pointer.
* reloc.c (bfd_generic_get_relocated_section_contents): Add
handling of a bfd_reloc_notsupported return value.
* versados.c (EDATA): Add range checking.
(get_record): Likewise.
(process_otr): Check for contents being available before updating
them.
(versados_canonicalize_reloc): Add range check.
PR binutils/17512
* dwarf.c (get_encoded_value): Check for an encoded size of 0.
(display_debug_lines_raw): Check for an invalid line range value.
(display_debug_frames): Check for corrupt augmentation data.
* coffgen.c (coff_get_normalized_symtab): Check for an excessive
number of auxillary entries.
* ieee.c (next_byte): Convert to a function. Return FALSE if the
next byte is beyond the end of the buffer.
(parse_int): Test the return value of next_byte.
(parse_expression): Convert to boolean. Return FALSE if the
parsing failed. Test the return value of next_byte.
(ieee_seek): Convert to a function. Return FALSE if the seek goes
beyond the end of the buffer.
(ieee_slurp_external_symbols): Test the return value of ieee_seek
and next_byte.
(ieee_slurp_sections): Convert to boolean. Return FALSE if the
operation failed. Test the return value of ieee_seek and
next_byte.
(ieee_archive_p): Test the return value of ieee_seek and
next_byte.
(do_one): Likewise.
(ieee_slurp_section_data): Likewise.
(ieee_object_p): Likewise. Store the size of the buffer in the
total_amt field in the header.
* libieee.h (common_header_type): Add amt field.
* mach-o.c (bfd_mach_o_canonicalize_one_reloc): Check that the
reloc's value is within range.
(bfd_mach_o_read_symtab_symbols): Nullify the symbols field if the
operation fails.
* pei-x86_64.c (pex64_xdata_print_uwd_codes): Replace abort with
an error message.
(pex64_dump_xdata): Check for buffer overflows.
* versados.c (process_otr): Check that the section exists before
taking its size.
(versados_object_p): Make sure that enough data was read for the
header to be checked.
* vms-alpha.c (vms_get_remaining_object_record): Change
read_so_far parameter to an unsigned int. Check that the amount
read is in range.
This is the updated version using uintptr_t as Alan Modra suggested.
2014-11-18 Jan-Benedict Glaw <jbglaw@lug-owl.de>
* dwarf.c (process_extended_line_op): Fix signedness warning.
PR binutils/17512
* peXXIgen.c (pe_print_pdata): Fail if the section's virtual size
is larger than its real size.
(rsrc_print_section): Fix off-by-one error checking for overflow.
* pei-x86_64.c (pex64_bfd_print_pdata): Handle empty unwind
sections.
* dwarf.c (get_encoded_value): Warn and return if the encoded
value is more than 64-bits long.
(SAFE_BYTE_GET): Do not attempt to read more than 64-bits.
(process_extended_line_op): Add more range checks.
(decode_location_expression): Use the return value from
display_block. Add more range checks.
(read_debug_line_header): Add range check.
(display_debug_lines_raw): Add range checks.
(display_debug_frames): Silently skip multiple zero terminators.
Add range checks.
(process_cu_tu_index): Check for non-existant or empty sections.
Use SAFE_BYTE_GET instead of byte_get.
PR binutils/17512
* dwarf.c (get_encoded_value): Add an 'end' parameter. Change the
'data' parameter to a double pointer and return the updated value.
(decode_location_expression): Update call to get_encoded_value.
(frame_need_space): Handle the case where one or both of the
mallocs fails.
(read_cie): Initialise the cie pointer, even if the read fails.
(display_debug_frames): Warn if the calculated block_end is before
the start of the block. Break the loop if the CIE could not be
read. Update call to get_encoded_value. Warn if the read CFA
expressions are too big.
* ieee.c (ieee_archive_p) Skip processing if no bytes are read at
all.
(ieee_object_p): Likewise.
PR binutils/17512
* dwarf.c (read_and_display_attr_value): Check that we do not read
past end.
(display_debug_pubnames_worker): Add range checks.
(process_debug_info): Check for invalid pointer sizes.
(display_loc_list): Likewise.
(display_loc_list_dwo): Likewise.
(display_debug_ranges): Likewise.
(display_debug_aranges): Check for invalid address size.
(read_cie): Add range checks. Replace call strchr with while loop.
* objdump.c (dump_dwarf): Replace abort with a warning message.
(print_section_stabs): Improve range checks.
* rdcoff.c (coff_get_slot): Use long for indx parameter type.
Add check for an excesively large index.
* rddbg.c (read_section_stabs_debugging_info): Zero terminate the
string table. Avoid walking off the end of the stabs data.
* stabs.c (parse_stab_string): Add check for a NULL name.
PR binutils/17512
* coffcode.h (coff_slurp_line_table): Set the line number of
corrupt entries to -1.
(coff_slurp_symbol_table): Alway initialise the value of the
symbol.
* coffgen.c (coff_print_symbol): Check that the combined pointer
is valid.
(coff_print_symbol): Do not print negative line numbers.
* peXXigen.c (pe_print_idata): Add range checking displaying
member names.
The linker side of pr16563 was fixed with commit 18cd5bce, but
unfortunately people continue to use older linkers with -flto. This
means we have binaries with working .eh_frame that can't be dumped by
readelf, and I'm seeing internal IBM bug reports about this fact.
PR 16563
* dwarf.c (GET): Remove semicolon.
(read_cie): New function, extracted from..
(display_debug_frames): ..here. Correctly handle signed offset
from FDE to CIE in .eh_frame. Decode forward referenced CIEs too.
When a DW_FORM_flag_present attribute comes at the very end of a
debug section, readelf complains about a corrupt attribute
because it's checking to make sure there's at least one byte of
data remaining. This patch suppresses the check when the form
is DW_FORM_flag_present.
2014-02-11 Cary Coutant <ccoutant@google.com>
* binutils/dwarf.c (read_and_display_attr_value): Don't warn
for zero-length attribute value.
I happened to run readelf on an ELF file created by Guile. readelf
complained about invalid values for DW_FORM_strp. At first I assumed
this was just a Guile bug, but eu-readelf did the right thing, so I
looked a bit deeper.
I came across some old Mach-O code to bias some offsets by section
addresses. Guile, unlike many ELF writers, sets the address for the
various DWARF-related sections, causing this unusual code to be run.
This code came from an old commit:
2005-09-30 H.J. Lu <hongjiu.lu@intel.com>
* dwarf.c (fetch_indirect_string): Adjust for section address.
(process_debug_info): Likewise.
(display_debug_loc): Likewise.
(display_debug_ranges): Likewise.
* objdump.c (mach_o_dwarf_sections): New.
(generic_dwarf_sections): Likewise.
(check_mach_o_dwarf): Likewise.
(dump_dwarf): Call check_mach_o_dwarf.
However it was partially reverted here:
https://sourceware.org/ml/binutils/2008-11/msg00134.html
This patch just completes the reversion.
Built and regtested on x86-64 Fedora 18. I also ran the resulting
readelf against the Guile-created object with success.
I have no way of testing this on Mach-O, so your feedback is
solicited.
2013-12-19 Tom Tromey <tromey@redhat.com>
* dwarf.c (fetch_indirect_string): Don't bias by section address.
(fetch_indexed_string): Likewise.
(process_debug_info): Likewise.
(display_debug_loc): Likewise.
(display_debug_ranges): Likewise.
* dwarf.c (cu_tu_indexes_read, shndx_pool, shndx_pool_size)
(shndx_pool_used): Move to top of file.
(struct cu_tu_set): New type.
(cu_count, tu_count, cu_sets, tu_sets): New file scope variables.
(fetch_indexed_string): Add "this_set" parameter. Update all callers.
(find_cu_tu_set_v2): New function.
(read_and_display_attr_value): Add "this_set" parameter.
(read_and_display_attr): Likewise.
(process_debug_info): Track base offsets for DWARF package files.
(load_debug_info): Call load_cu_tu_indexes.
(get_DW_SECT_short_name): New function.
(process_cu_tu_index): Add support for version 2 DWARF package files.
