calling fix_new_exp recursively.
(adjust_reloc_syms): If a fixup's symbol value is a sum of an undefined symbol
and a constant, fold the constant into the fixup, and refer to the undefined
symbol directly. Then process the fixup again from scratch.
(write_object_file): Before calling adjust_reloc_syms, make a pass through the
symbol list trying to resolve values.
(print_fixup): New routine, for debugging.
(write_relocs): Call bfd_install_relocation. Deleted various hacks for working
around problems with bfd_perform_relocation.
BFD_ASSEMBLER.
* subsegs.c (subseg_change): Initialize fix_tail field.
(subseg_get): Likewise.
* write.c (frags_chained): New static variable.
(fix_new_internal): If frags_chained is set, use fix_root and
fix_tail from seg_info (now_seg), rather than frchain_now.
(chain_frchains_together_1): Set fix_tail field.
(chain_frchains_together): Set frags_chained.
is called.
(dump_section_relocs): Note whether a symbol is a section symbol or not.
(adjust_reloc_syms): For now, always supply an absolute symbol for fixups
without symbols but not yet `done'. Use section_symbol to get the symbol,
instead of going directly for abs_symbol.
(write_relocs) [DEBUG4]: Abort if any symbol referred to by a reloc is not a
section symbol and is not in the symbol table.
(set_symtab): New function, broken out from write_object_file. Counts symbol
table instead of relying on an earlier count.
(write_object_file): Call set_symtab, but do it after potentially invoking the
*_frob_file macros. Don't bother counting symbols. Call symbol_remove,
instead of expanding it in place. Moved the conditionalized `object_file_size'
declaration down to conditionalized block where it's used. When using the
absolute symbol for a fixup without a symbol, set sy_used_in_reloc.
(write_object_file) [BFD_ASSEMBLER]: Call section_symbol to get the correct
symbol for the absolute section.
* subsegs.h (struct frchain): If BFD_ASSEMBLER, added new fields
fix_root and fix_tail.
(segment_info_type): If BFD_ASSEMBLER, don't define fix_tail
field.
* write.c (fix_new_internal): If BFD_ASSEMBLER, set fix_rootP and
fix_tailP based on frchain_now, not seg_info (now_seg).
(chain_frchains_together_1): Chain the subsegment relocs together.
* subsegs.c (subseg_change): Don't clear fix_tail field.
(subseg_get): Likewise.
* literal.c (add_to_literal_pool): Look through the relocs via
frchain_now, not seginfo.
* write.c (write_object_file): Simplified usage of obj_frob_symbol
and tc_frob_symbol. Always call both if the symbol is going to be
output.
* write.c (relax_segment): Use %ld rather than %d when printing
fragP->fr_var, and cast it to long.
just before calling obj_frob_file.
* config/tc-alpha.c (alpha_gp_value): Renamed from gp_value (refs changed), made
non-static.
(getExpression): Return void.
(select_gp_value): Abort if gp_value is non-zero. Delete call to non-existent
bfd_set_gp_value.
(alpha_validate_fix): Function deleted.
(alpha_frob_symbol): Function deleted.
(alpha_local_label): Function deleted.
(alpha_frob_file): Renamed from alpha_end.
* config/tc-alpha.h (alpha_frob_symbol, alpha_validate_fix, alpha_local_label,
alpha_end): Declarations deleted.
(alpha_gp_value, alpha_frob_file): Declare.
(tc_frob_symbol, TC_VALIDATE_FIX, md_end): Macros deleted.
(LOCAL_LABEL): Move code here from tc-alpha.c:alpha_local_label.
(md_convert_frag): Simplified slightly.
(tc_frob_file): New macro.
* write.c (cvt_frag_to_fill): Don't assume that fr_var for rs_align or rs_org
frags will be 1.
(relax_segment): For rs_align, if fr_var is not 1, complain if
required padding is not a multiple of the size of the pad pattern.
(fixup_segment): Leave gp-relative relocations alone. For pcrel relocations
referring to the same segment, clear fx_pcrel when clearing fx_addsy.
* as.h: Adjust comments on rs_align.
* write.c, config/obj-{aout,bout,coff*}.c, config/tc-sparc.c: Query the fx_done
field instead of fx_addsy to see if the fixup still needs to be applied. Set
fx_done and clear fx_addsy both, for now. If TC_HANDLES_FX_DONE isn't defined,
assume md_apply_fix will only clear fx_addsy, and set fx_done accordingly after
returning.
* config/tc-sparc.h (TC_HANDLES_FX_DONE): Define.
* config/obj-coff.c (dot_text_symbol, dot_data_symbol, dot_bss_symbol): Defined
here, static.
* config/obj-aout.c [BFD_ASSEMBLER]: Undef NO_RELOC before including aout/aout64.h.
* write.c (write_object_file): If EMIT_SECTION_SYMBOLS is false, don't write
out a section symbol even if it's used in a relocation; assume relocations will
handle section numbers somehow. Rename "punt_it" label to "punt_it_if_unused"
to reflect it's true use.
(EMIT_SECTION_SYMBOLS): Default to 1.
(adjust_reloc_syms): Don't create a new symbol for an absolute
reference; just use the absolute section symbol.
(write_relocs): Make printout of reloc values dependent on flag DEBUG3, not
DEBUG2.
* config/obj-aout.h (EMIT_SECTION_SYMBOLS): Define as 0.
* config/obj-ecoff.h (EMIT_SECTION_SYMBOLS): Ditto.
(i.e., relocation against absolute), create a phony local symbol, and use it in
the reloc.
(fixup_segment): When adjusting a reloc with an absolute symbol, have
TC_FORCE_RELOCATION control clearing add_symbolP too.
* config/tc-sparc.h (RELOC_REQUIRES_SYMBOL): Define.
* tc.h (md_end): Don't declare it.
* config/tc-*.[ch] (md_end): Deleted, in cases where it doesn't do anything.
* config/tc-vax.c (vip_end): Deleted null function.
* config/tc-mips.c (md_mips_end): Renamed from md_end.
* config/tc-mips.h (md_mips_end): Declare.
(md_end): New macro, calls md_mips_end.
* write.c (write_object_file): Don't close output file.
* as.c (main): Close output file (if needed) after calling listing_print, which
should be after calling write_object_file, which sets the frag addresses.
(fixup_segment): Allow the target machine to specify that a
relocation must be generated for a particular fixup. Remove
#ifndef TC_HPPA hack.
* config/tc-hppa.h (TC_FORCE_RELOCATION): Define.
* config/tc-hppa.c (md_apply_fix_1): Never change fx_addsy to
be NULL. Only fixup_segment is supposed to do that.
(hppa_force_relocation): New function.
(relax_segment): If md_relax_frag is defined, use it to handle a
frag of type rs_machine_dependent rather than looking through
md_relax_table.
* write.c (relax_and_size_seg): Don't set SEC_HAS_CONTENTS for a
bss section. Set SEC_RELOC if there are any relocations, even for
a zero size section.
* write.c (write_relocs): In RELOC_EXPANSION_POSSIBLE case, based
data offset on reloc[0]->address rather than reloc[j]->address, so
that multiple relocs can affect different memory locations.
* write.c (chain_frchains_together, relax_and_size_seg,
adjust_reloc_syms, write_relocs): Make third argument PTR, not
char *, to match definition of bfd_map_over_sections.
of interest to the linker. ENTRY/EXIT relocations for SOM are
an example of marker relocations.
* write.c (write_relocs): Instead of assuming size of a relocation
is 4 bytes, pick up the size from relocation itself.
(fixup_segment): Do not complain that a value is too small for
marker relocations.
* expr.h (expressionS): New field X_unsigned.
* expr.c (operand): Initialize X_unsigned to 1. Set it to 0 for
unary minus case.
(expr) Fix typo resultP to right if missing operand. Set
X_unsigned to 1 when building new expression.
* read.c (potable): Make "octa" and "quad" call cons, not
big_cons.
(cons): Handle bignums. If given an O_constant (small integer) to
fill a big space, turn it into a bignum.
(parse_bitfield_cons): Set X_unsigned field.
(bignum_low, bignum_limit, bignum_high, grow_bignum, big_cons):
Removed.
* read.h (big_cons): Remove prototype.
* symbols.c (resolve_symbol_value): Don't give a warning if a
symbol in expr_section can not be resolved.
(S_SET_VALUE): Clear X_unsigned.
* write.c (write_object_file): If resolve_symbol_value failed on a
symbol we are writing out, give a warning.
* config/tc-h8500.c (parse_reglist): Set X_unsigned.
* config/tc-hppa.c (md_pseudo_table): Change "octa" and "quad" to
call pa_cons, not pa_big_cons.
(pa_big_cons): Remove.
* config/tc-hppa.h (pa_big_cons): Remove declaration.
* config/tc-i960.c (md_pseudo_table): Change "quad" to call cons,
not big_cons.
as the value of a symbol.
* struc-symbol.h (struct symbol): Removed sy_forward field. Added
sy_resolved and sy_resolving single bit fields.
* symbols.c (symbol_new): Don't initialize sy_forward field.
(resolve_symbol_value): New function to adjust symbol value by
fragment address, using recursion to resolve forward symbols.
* symbols.h: Added prototype for new function.
* read.c (pseudo_set): Set symbolP->sy_value to an undefined
expression rather than setting symbolP->sy_forward.
* write.c (write_object_file): Use resolve_symbol_value on
symbols, keeping the common case (the old behaviour) inline.
* config/obj-aout.c (obj_aout_frob_symbol): Removed sy_forward
handling (subsumed by write.c change).
* config/obj-coff.c, config/obj-coffbfd.c (obj_coff_val): Set
sy_value rather than sy_forward.
* config/obj-coffbfd.c (obj_coff_endef, yank_symbols): Check
expression segment rather than sy_forward.
(yank_symbols): Use resolve_symbol_value.
(crawl_symbols): Removed extra pass over symbols.
* config/obj-aout.c, config/obj-bout.c, config/obj-coff.c,
config/obj-vms.c (obj_crawl_symbol_chain): Removed extra pass over
symbols which handled sy_forward; use resolve_symbol_value
instead.
* config/obj-coff.h, config/obj-coffbfd.h (obj_frob_forward_symbol):
Define.
* config/obj-elf.c (obj_elf_stab_generic): Check expression
segment rather than sy_forward.
* config/obj-vms.c (VMS_Check_For_Main): Don't initialize
sy_forward; do initialize sy_resolved and sy_resolving.
* config/tc-hppa.h (STAB_FIXUP): Use sy_value, not sy_forward.
just a longword:
* struc-symbol.h: New field sy_value.
* as.h: Include expr.h before struc-symbol.h.
* expr.h: Use struct symbol rather than symbolS.
* symbols.c (S_GET_VALUE, S_SET_VALUE): Rewrote to retrieve value
of sy_value field; compile unconditionally, not just if
BFD_ASSEMBLER.
* symbols.h: Compile S_{SG}ET_VALUE prototypes unconditionally.
* write.c (write_object_file): Set BFD symbol value to gas symbol
value.
* config/obj-aout.h, config/obj-bout.h, config/obj-coff.h,
config/obj-coffbfd.h, config/obj-generic.h, config/obj-vms.h
(S_GET_VALUE, S_SET_VALUE): Removed macro definitions.
* config/obj-ieee.c (S_GET_VALUE, S_SET_VALUE): Removed.
* config/obj-coff.h, obj-coffbfd.h: Rewrote several macros to use
S_GET_VALUE rather than ost_entry.n_value.
* config/obj-aout.c (obj_symbol_to_chars), config/obj-bout.c
(obj_symbol_to_chars), config/obj-coff.c (obj_symbol_to_chars),
config/obj-coffbfd.c (symbol_to_chars): Get value to write out
using S_GET_VALUE--don't assume it is already set.
* config/obj-ieee.c (do_symbols): Set BFD symbol value to gas
symbol value.
* config/obj-vms.c (various): Don't assign directly to
S_GET_VALUE; use S_SET_VALUE instead.
Supply prototype for bfd_alloc for now.
(fixup_segment): Local add_number is now valueT. Fix some range-checking bugs.
(relax_align): Type `int' should be sufficient for the exponent.
(fix_new): Argument offset is offsetT. Locals size and newsize are valueT.
the section contents.
* config/obj-ecoff.h, config/obj-ecoff.c: Numerous changes to get
symbol table and values right.
* config/tc-mips.h (LOCAL_LABEL): If OBJ_ECOFF, any label starting
with $L is local.
* config/tc-mips.c (tc_gen_reloc): If OBJ_ECOFF, adjust the addend
by the section vma.
* config/z8k.mt (TARG_CPU_DEPENDENTS): The relevant file is
z8k-opc.h, not z8k.h.
* app.c, config/tc-*.c: Don't include read.h, since it is already
included by as.h.
* These are based on patches from Minh Tran-le
<mtranle@paris.intellicorp.com>.
* configure.in (i[34]86-ibm-aix*): Accept i486 for host. Use
obj_format coffbfd and gas_target i386coff for target.
(i[34]86-*-isc*): New host (uses sysv).
* config/i386aix.mt: Removed (no longer used).
* config/mh-i386aix (RANLIB): Use true rather than /bin/true.
(MINUS_G): Removed.
(LDFLAGS): Added, defined as -shlib.
* config/te-i386aix.h (REVERSE_SORT_RELOCS): Undefine.
* config/te-sco386.h (LOCAL_LABEL): Don't define.
(DOT_LABEL_PREFIX): Define.
* expr.c (operand): If DOT_LABEL_PREFIX, use .L0\001 as a label
name rather than L0\001.
* read.c (s_lcomm): Make a frag in SEG_BSS rather than using
local_bss_counter.
* symbols.c, symbols.h (local_bss_counter): Removed.
* write.c (write_object_file): bss no longer uses
local_bss_counter. Pass correct data and bss size to
VMS_write_object_file.
* config/obj-vms.c (VMS_write_object_file): Accept bss size as
argument, rather than using local_bss_counter.
* config/tc-m88k.c (s_bss): Don't use local_bss_counter.
* config/tc-sparc.c (s_reserve): Don't use local_bss_counter.
* config/obj-coffbfd.c (had_lineno, had_reloc): Removed.
(size_section): Restored sanity check.
(do_relocs_for): Base section address on s_paddr rather than
computing it. Adjust a29k R_IHIHALF special case to account for
section paddr (used to require paddr to be zero). If there are no
reclos, set s_relptr to 0. Set relocation size in object_headers.
(fill_section): Always set s_vaddr here, removing
ZERO_BASED_SEGMENTS case. Force s_scnptr for bss to 0. Don't set
NOLOAD for i386 .bss, because it confuses the SVR3 native linker.
Set STYP_INFO for .comment.
(coff_header_append): Use object headers and H_{SET,GET}_* macros.
Make aouthdr writing depend on OBJ_COFF_OMIT_OPTIONAL_HEADER.
(crawl_symbols): Handle 8 character section name correctly. Use
H_{SET,GET}_* macros.
(do_linenos_for): Set lineno size in object_headers.
(write_object_file): Use H_{SET,GET}_* macros. Don't bother to
set s_vaddr here. If string_byte_count remains 4, set it back to
0, and only write strings out if there are some. Call
fill_section before do_relocs_for and do_linenos_for.
(obj_coff_section): Handle optional quoted second argument giving
section characteristics.
(obj_coff_bss): Added to handle .bss.
(obj_coff_ident): Added to handle .ident (puts string in .comment
section).
(obj_coff_lcomm): Put common symbols in .bss, not .data.
(fixup_mdeps): Change to segment. Call frag_wane after
md_convert_frag.
(fixup_segment): Explicitly check S_IS_COMMON before making 386
adjustment (already happened only for common symbols, but this is
clearer).
* config/obj-coffbfd.h (OBJ_COFF_OMIT_OPTIONAL_HEADER): Define.
* config/tc-i386.c (s_bss): Don't use if I386COFF.
(md_pseudo_table): Ignore .optim and .noopt.
(tc_coff_sizemachdep): New function.
* config/tc-i386.h (REVERSE_SORT_RELOCS): Undef, for SVR3
compatibility.
(LOCAL_LABEL): Removed definition.
(DOT_LABEL_PREFIX): Defined.
Deleted some unused code.
Fixed some declarations to use PARAMS macro.
Fixed up configure.in for new targets.
Some whitespace/comment fixes.
Merged config/ChangeLog.
as data0_frchainP
* write.c (write_object_file): various changes to handle data in
the BSS segment in much the same was as stuff in the DATA segment.
* subsegs.c (subseg_change): allow and handle a change into SEG_BSS.
* expr.c(expr): allow SEG_REGISTER in expressions.
* read.c(pseudo_set): register expressions can be the source of a
set.
* subsegs.c (subseg_new): Now -R forces all changes to SEG_DATA to
goto SEG_TEXT (if a.out)
* write.c (write_object_file): If a.out don't use the old way for
-R.
* config/obj-a.out (s_sect): complain if the user tries to use a
subsegment with a value which might interfere with out -R hackery.
* config/tc-m68k.c (m68k_reg_parse): lookup names in symbol table
rather than use ugly if tree. (init_regtable): insert register
names into symbol table.
