* elfxx-mips.h (_bfd_mips_elf_get_synthetic_symtab): New
prototype.
* elf32-mips.c (elf_backend_plt_sym_val): Remove macro.
(bfd_elf32_get_synthetic_symtab): New macro.
* elfxx-mips.c (plt_entry): New structure.
(mips_elf_link_hash_entry): Add use_plt_entry member.
(mips_elf_link_hash_table): Rename plt_entry_size member to
plt_mips_entry_size. Add plt_comp_entry_size, plt_mips_offset,
plt_comp_offset, plt_got_index entries and plt_header_is_comp
members.
(STUB_LW_MICROMIPS, STUB_MOVE_MICROMIPS): New macros.
(STUB_LUI_MICROMIPS, STUB_JALR_MICROMIPS): Likewise.
(STUB_ORI_MICROMIPS, STUB_LI16U_MICROMIPS): Likewise.
(STUB_LI16S_MICROMIPS): Likewise.
(MICROMIPS_FUNCTION_STUB_NORMAL_SIZE): Likewise.
(MICROMIPS_FUNCTION_STUB_BIG_SIZE): Likewise.
(micromips_o32_exec_plt0_entry): New variable.
(mips16_o32_exec_plt_entry): Likewise.
(micromips_o32_exec_plt_entry): Likewise.
(mips_elf_link_hash_newfunc): Initialize use_plt_entry.
(mips_elf_output_extsym): Update to use gotplt_union's plist
member rather than offset.
(mips_elf_gotplt_index): Likewise. Remove the VxWorks
restriction. Use MIPS_ELF_GOT_SIZE to calculate GOT address.
(mips_elf_count_got_symbols): Update to use gotplt_union's plist
member rather than offset.
(mips_elf_calculate_relocation): Handle MIPS16/microMIPS PLT
entries.
(_bfd_mips_elf_create_dynamic_sections): Don't set PLT sizes
here.
(mips_elf_make_plt_record): New function.
(_bfd_mips_elf_check_relocs): Update comment. Record occurences
of JAL relocations that might need a PLT entry.
(_bfd_mips_elf_adjust_dynamic_symbol): Update to use
gotplt_union's plist member rather than offset. Set individual
PLT entry sizes here. Handle MIPS16/microMIPS PLT entries.
Don't set the symbol's value in the symbol table for PLT
references here. Don't set the PLT or PLT GOT section sizes
here.
(mips_elf_estimate_stub_size): Handle microMIPS stubs.
(mips_elf_allocate_lazy_stub): Likewise.
(mips_elf_lay_out_lazy_stubs): Likewise. Define a _MIPS_STUBS_
magic symbol.
(mips_elf_set_plt_sym_value): New function.
(_bfd_mips_elf_size_dynamic_sections): Set PLT header size and
PLT and PLT GOT section sizes here. Set the symbol values in
the symbol table for PLT references here. Handle microMIPS
annotation of the _PROCEDURE_LINKAGE_TABLE_ magic symbol.
(_bfd_mips_elf_finish_dynamic_symbol): Update to use
gotplt_union's plist member rather than offset. Handle
MIPS16/microMIPS PLT entries. Handle microMIPS stubs.
(_bfd_mips_vxworks_finish_dynamic_symbol): Update to use
gotplt_union's plist member rather than offset. Use
MIPS_ELF_GOT_SIZE to calculate GOT address.
(mips_finish_exec_plt): Handle microMIPS PLT. Return status.
(_bfd_mips_elf_finish_dynamic_sections): Handle result from
mips_finish_exec_plt.
(_bfd_mips_elf_link_hash_table_create): Update to use
gotplt_union's plist member rather than offset.
(_bfd_mips_elf_get_synthetic_symtab): New function.
include/elf/
* mips.h (ELF_ST_IS_MIPS_PLT): Respect STO_MIPS16 setting.
(ELF_ST_SET_MIPS_PLT): Likewise.
gdb/
* mips-tdep.c (mips_elf_make_msymbol_special): Handle MIPS16 and
microMIPS synthetic symbols.
ld/
* emulparams/elf32btsmip.sh: Arrange for .got.plt to be placed
as close to .plt as possible.
* scripttempl/elf.sc: Handle $INITIAL_READWRITE_SECTIONS and
$PLT_NEXT_DATA variables.
ld/testsuite/
* ld-mips-elf/jalx-2.dd: Update for microMIPS PLT support.
* ld-mips-elf/pic-and-nonpic-3a.dd: Update for the _MIPS_STUBS_
magic symbol.
* ld-mips-elf/pic-and-nonpic-3b.dd: Likewise.
* ld-mips-elf/pic-and-nonpic-6-n32.dd: Likewise.
* ld-mips-elf/pic-and-nonpic-6-n64.dd: Likewise.
* ld-mips-elf/pic-and-nonpic-6-o32.dd: Likewise.
* ld-mips-elf/stub-dynsym-1-10000.d: Likewise.
* ld-mips-elf/stub-dynsym-1-2fe80.d: Likewise.
* ld-mips-elf/stub-dynsym-1-7fff.d: Likewise.
* ld-mips-elf/stub-dynsym-1-8000.d: Likewise.
* ld-mips-elf/stub-dynsym-1-fff0.d: Likewise.
* ld-mips-elf/tlslib-o32.d: Likewise.
opcodes/
* mips-dis.c (is_mips16_plt_tail): New function.
(print_insn_mips16): Handle MIPS16 PLT entry's GOT slot address
word.
(is_compressed_mode_p): Handle MIPS16/microMIPS PLT entries.
* Makefile.am (BFD32_BACKENDS, BFD32_BACKENDS_CFILES): Move MIPS ELF
files to...
(BFD64_BACKENDS, BFD64_BACKENDS_CFILES): ...here.
* Makefile.in: Regenerate.
* config.bfd: Enclose all MIPS ELF targets in #ifdef BFD64.
Set want64 to true for them at the end.
* targets.c (_bfd_target_vector): Protect MIPS ELF targets with
#ifdef BFD64.
gas/
* config/tc-mips.c: Assert that offsetT and valueT are at least
8 bytes in size.
(GPR_SMIN, GPR_SMAX): New macros.
(macro, mips_ip): Remove code for 4-byte valueT and offsetT.
ld/
* Makefile.am (ALL_EMULATION_SOURCES): Move MIPS ELF emulations to...
(ALL_64_EMULATION_SOURCES): ...here.
* Makefile.in: Regenerate.
* elf64-aarch64.c (elf64_aarch64_final_link_relocate): Call
aarch64_resolve_relocation and bfd_elf_aarch64_put_addend to
handle the relocations of R_AARCH64_JUMP26, R_AARCH64_CALL26,
R_AARCH64_LD64_GOT_LO12_NC, R_AARCH64_ADR_GOT_PAGE and
R_AARCH64_GOT_LD_PREL19.
ld/testsuite/
* ld-aarch64/aarch64-elf.exp: Add 'ifunc-7c'.
* ld-aarch64/ifunc-7c.d: New test.
* elf32-arm.c (allocate_dynrelocs_for_symbol): Transform
ST_BRANCH_TO_ARM into ST_BRANCH_TO_THUMB if the target only
supports thumb instructions.
PR ld/15302
* ld-arm/branch-lks-sym.ld: New script.
* ld-arm/thumb-b-lks-sym.s: New test.
* ld-arm/thumb-b-lks-sym.d: Expected disassembly.
* ld-arm/thumb-bl-lks-sym.s: New test.
* ld-arm/thumb-bl-lks-sym.d: Expected disassembly.
* ld-arm/arm-elf.exp: Run the new tests.
Fix incorrect usage of ELF32_R_SYM introduced in ifunc changes.
bfd/ChangeLog:
2013-06-11 Will Newton <will.newton@linaro.org>
* elf64-aarch64.c (elf_aarch64_get_local_sym_hash): Use
ELF64_R_SYM instead of ELF32_R_SYM.
alternate debug info source.
(dwarf_debug_sections): Add entries for alternate .debug_str and
.debug_info sections.
(dwarf_debug_section_enum): Likewise.
(read_alt_indirect_string): New function. Handles a
DW_FORM_GNU_strp_alt attribute.
(read_alt_indirect_ref): New function. Handles a
DW_FORM_GNU_ref_alt attribute.
(read_attribute_value): Process DW_FORM_GNU_ref_alt and
DW_FORM_GNU_strp_alt.
(find_abstract_instance_name): Handle DW_FORM_GNU_ref_alt
attributes.
(_bfd_dwarf2_cleanup_debug_info): Free alternate debug info
sources.
* opncls.c (GNU_DEBUGALTLINK): Define.
(bfd_get_alt_debug_link_info): New function.
(separate_alt_debug_file_exists): New function.
(find_separate_debug_file): Add parameters for fetch and check
functions.
(bfd_follow_gnu_debugaltlink): New function.
* bfd-in2.h: Regenerate.
The current hard coded limit of open files in bfd/cache.c is 10. This
is pretty low these days. Binaries are often linked against much more
than 10 files (and sometimes against more than 100 shared libraries).
When debugging with GDB some files are opened and closed multiple
times because of this low limit. If possible make the BFD cache file
limit depend on the actual open file limit of the process so more BFD
files can be open at the same time.
* cache.c (BFD_CACHE_MAX_OPEN): Remove define.
(max_open_files): New static int initialized to zero.
(bfd_cache_max_open): New static function to set and return
max_open_files.
(bfd_cache_init): Use bfd_cache_max_open.
(bfd_open_file): Likewise.
* configure.in (AC_CHECK_HEADERS): Add sys/resource.h.
(AC_CHECK_FUNCS): Add getrlimit.
* configure: Regenerated.
* config.in: Likewise.
* sysdep.h: Check and include sys/resource.h for getrlimit.
