I believe that the get_exec_file function is unnecessary, and the code
can be simplified if we remove it.
Consider for instance when you "run" a program on Linux with native
debugging.
1. run_command_1 obtains the executable file from
`current_program_space->exec_filename ()`
2. it passes it to `run_target->create_inferior()`, which is
`inf_ptrace_target::create_inferior()` in this case, which then
passes it to `fork_inferior()`
3. `fork_inferior()` then has a fallback, where if the passed exec file
is nullptr, it gets its from `get_exec_file()`.
4. `get_exec_file()` returns `current_program_space->exec_filename ()`
- just like the things we started with - or errors out if the
current program space doesn't have a specified executable.
If there's no exec filename passed in step 1, there's not going to be
any in step 4, so it seems pointless to call `get_exec_file()`, we could
just error out when `exec_file` is nullptr. But we can't error out
directly in `fork_inferior()`, since the error is GDB-specific, and that
function is shared with GDBserver.
Speaking of GDBserver, all code paths that lead to `fork_inferior()`
provide a non-nullptr exec file.
Therefore, to simplify things:
- Make `fork_inferior()` assume that the passed exec file is not
nullptr, don't call `get_exec_file()`
- Change some targets (darwin-nat, go32-nat, gnu-nat, inf-ptrace,
nto-procfs, procfs) to error out when the exec file passed to their
create_inferior method is nullptr. Some targets are fine with a
nullptr exec file, so we can't check that in `run_command_1()`.
- Add the `no_executable_specified_error()` function, which re-uses the
error message that `get_exec_file()` had.
- Change some targets (go32-nat, nto-procfs) to not call
`get_exec_file()`, since it's pointless for the same reason as in the
example above, if it returns, it's going the be the same value as the
`exec_file` parameter. Just rely on `exec_file`.
- Remove the final use of `get_exec_file()`, in `load_command()`.
- Remove the `get_exec_file()` implementations in GDB and GDBserver and
remove the shared declaration.
Change-Id: I601c16498e455f7baa1f111a179da2f6c913baa3
Approved-By: Tom Tromey <tom@tromey.com>
`get_exec_file()` never returns nullptr, so remove some dead code that
check for a nullptr return.
Change-Id: I9eff2a013d602588aaf4477a22cf45f2bc417c6a
Approved-By: Tom Tromey <tom@tromey.com>
Calls of `get_exec_file (0)` are equivalent to just getting the exec
filename from the current program space. I'm looking to remove
`get_exec_file`, so replace these uses with
`current_program_space->exec_filename ()`.
Remove the `err` parameter of `get_exec_wrapper` since all the calls
that remain pass 1, meaning to error out if no executable is specified.
Change-Id: I7729ea4c7f03dbb046211cc5aa3858ab3a551965
Approved-By: Tom Tromey <tom@tromey.com>
Just like the title says... I think this makes things a bit clearer, for
instance where the exec filename is set. It also makes the read call
sites a bit nicer, avoiding the `.get ()`.
Change-Id: If8b58ae8f6270c8a34b868f6ca06128c6671ea3c
Approved-By: Tom Tromey <tom@tromey.com>
Remove includes reported as unused by clangd. Then, add any includes
necessary to get rid of errors (includes possibly relying on previous
includes)..
I didn't remove the includes of gdb-safe-ctypes.h, because it appears to
do some some preprocessor magic, redefining standard macros. I'm afraid
that removing these includes could change the behavior unintentionally.
Change-Id: I4c5b652355c3bbce022fe0d447a72dc4e1d17d34
Approved-By: Tom Tromey <tom@tromey.com>
It seems like gdb_curses.h is included whenever we want to access
ncurses functionality, instead of including directly ncurses.h. As a
result, clangd often erroneously shows that gdb_curses.h inclusions are
unused.
By adding those pragmas, clangd (and the include-what-you-use tool)
understands that gdb_curses.h is a valid provider for whatever these
ncurses.h files provide.
Change-Id: Ia8acd761dae1577f7151d5fb558f35514b4e4ea2
Approved-By: Tom Tromey <tom@tromey.com>
Change the `TUI_*` macros to access known windows to functions. Define
them in their respective files, because trying to define them in
tui-data.h would end up causing include cycles.
This makes static analysis (detection of unused include files in this
case) more accurate, and I think in general we should avoid hiding
code behind macros if not necessary.
Change-Id: I1e38cee843984c48ab34030b19dac0d726f851af
Approved-By: Tom Tromey <tom@tromey.com>
Test behaviour of watchpoints triggered by MOPS instructions. This test
is similar to gdb.base/memops-watchpoint.exp, but specifically for MOPS
instructions rather than whatever instructions are used in the libc's
implementation of memset/memcpy/memmove.
There's a separate watched variable for each set of instructions so that
the testcase can test whether GDB correctly identified the watchpoint
that triggered in each case.
Approved-By: Luis Machado <luis.machado@arm.com>
Tested-By: Luis Machado <luis.machado@arm.com>
There are two kinds of MOPS instructions: set instructions and copy
instructions. Within each group there are variants with minor
differences in how they read or write to memory — e.g., non-temporal
read and/or write, unprivileged read and/or write and permutations of
those — but they work in the same way in terms of the registers and
regions of memory that they modify.
The new gdb.reverse/aarch64-mops.exp testcase verifies that MOPS
instructions are recorded and correctly reversed. Not all variants of the
copy and set instructions are tested, since there are many and the record
and replay target processes them in the same way.
PR tdep/31666
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=31666
Approved-By: Luis Machado <luis.machado@arm.com>
Tested-By: Luis Machado <luis.machado@arm.com>
The AArch64 MOPS (Memory Operation) instructions provide a standardised
instruction sequence to perform a memset, memcpy or memmove. A sequence is
always composed of three instructions: a prologue instruction, a main
instruction and an epilogue instruction. As an illustration, here are the
implementations of these memory operations in glibc 2.39:
(gdb) disassemble/r
Dump of assembler code for function __memset_mops:
=> 0x0000fffff7e8d780 <+0>: d503201f nop
0x0000fffff7e8d784 <+4>: aa0003e3 mov x3, x0
0x0000fffff7e8d788 <+8>: 19c10443 setp [x3]!, x2!, x1
0x0000fffff7e8d78c <+12>: 19c14443 setm [x3]!, x2!, x1
0x0000fffff7e8d790 <+16>: 19c18443 sete [x3]!, x2!, x1
0x0000fffff7e8d794 <+20>: d65f03c0 ret
End of assembler dump.
(gdb) disassemble/r
Dump of assembler code for function __memcpy_mops:
=> 0x0000fffff7e8c580 <+0>: d503201f nop
0x0000fffff7e8c584 <+4>: aa0003e3 mov x3, x0
0x0000fffff7e8c588 <+8>: 19010443 cpyfp [x3]!, [x1]!, x2!
0x0000fffff7e8c58c <+12>: 19410443 cpyfm [x3]!, [x1]!, x2!
0x0000fffff7e8c590 <+16>: 19810443 cpyfe [x3]!, [x1]!, x2!
0x0000fffff7e8c594 <+20>: d65f03c0 ret
End of assembler dump.
(gdb) disassemble/r
Dump of assembler code for function __memmove_mops:
=> 0x0000fffff7e8d180 <+0>: d503201f nop
0x0000fffff7e8d184 <+4>: aa0003e3 mov x3, x0
0x0000fffff7e8d188 <+8>: 1d010443 cpyp [x3]!, [x1]!, x2!
0x0000fffff7e8d18c <+12>: 1d410443 cpym [x3]!, [x1]!, x2!
0x0000fffff7e8d190 <+16>: 1d810443 cpye [x3]!, [x1]!, x2!
0x0000fffff7e8d194 <+20>: d65f03c0 ret
End of assembler dump.
The Arm Architecture Reference Manual says that "the prologue, main, and
epilogue instructions are expected to be run in succession and to appear
consecutively in memory". Therefore this patch disables displaced stepping
on them.
The testcase verifies that MOPS sequences are correctly single-stepped.
PR tdep/31666
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=31666
Approved-By: Luis Machado <luis.machado@arm.com>
Tested-By: Luis Machado <luis.machado@arm.com>
In arm-linux-tdep.c, ARM_LINUX_JB_PC_EABI is defined as 9, but it's been 1
since glibc 2.20.
See glibc commit 80a56cc3ee ("ARM: Add SystemTap probes to longjmp and
setjmp.").
Update it, allowing us to run into the gdb/26967 kfail.
Tested on arm-linux.
Approved-By: Luis Machado <luis.machado@arm.com>
PR arm/tdep
Bug: https://www.sourceware.org/bugzilla/show_bug.cgi?id=31089
In commit 6fc018e9e5 I replaced the fdr_ptr csym check against the
header isymMax count with a check against bfd symcount. In fact, both
checks are needed. The isymMax check sanity checks accesses against
the external sym array, the symcount one against the internal array.
* ecoff.c (_bfd_ecoff_slurp_symbol_table): Reinstate fdr_ptr
csym check against isymMax.
In case of discarded sections, via /DISCARD/ or .gnu.linkonce,
relr relocation accounting was wrong. This broke building linux.
The issue was that the *_relocate_section logic was copied to
record_relr_non_got_relocs to find the relative relocs that can
be packed, however *_relocate_section is not called on sections
that are discarded, while record_relr_non_got_relocs is called
for all input sections. The fix is to filter out the discarded
sections with the same logic that is used to count non-GOT
relocs in *_late_size_sections for local symbols earlier.
Use the discarded_section helper in both cases to clarify the
intent and handle all corner-cases consistently.
GOT relocations are affected too if all sections are discarded
that reference the GOT entry of a particular symbol, however
this can cause unused GOT entries independently of DT_RELR, and
the only difference with DT_RELR is that a relative reloc may be
emitted instead of a R_AARCH64_NONE for the unused GOT entry
which is acceptable. A proper fix would require redoing the GOT
refcounting after we know the discarded sections, see bug 31850.
When running test-case gdb.fortran/array-bounds.exp on arm-linux, we run into:
...
(gdb) print &foo^M
$1 = (PTR TO -> ( real(kind=4) (0:1) )) 0xfffef008^M
(gdb) FAIL: gdb.fortran/array-bounds.exp: print &foo
print &bar^M
$2 = (PTR TO -> ( real(kind=4) (-1:0) )) 0xfffef010^M
(gdb) FAIL: gdb.fortran/array-bounds.exp: print &bar
...
This is due to gcc PR debug/54934.
The test-case contains a kfail for this, which is only activated for
x86_64/i386.
Fix this by enabling the kfail for all ilp32 targets.
Also:
- change the kfail into an xfail, because gdb is not at fault here, and
- limit the xfail to the gfortran compiler.
Tested on arm-linux.
In commit:
commit 824083f34c
Date: Fri Apr 12 17:47:20 2024 +0100
gdb/doc: use silent-rules.mk in the Makefile
I rewrote the rules for building the man pages. While doing this I
accidentally switched from using MAN2POD5 to MAN2POD1 for generating
the file gdbinit.5.
Restore use of MAN2POD5 where appropriate.
Previously a "stepOut" request when in the outermost frame would result
in a sucessful response even though gdb internally would reject the
associated "finish" request, which means no stoppedEvent would ever be
sent back to the client. Thus the client would believe the inferior was
still running and as a consequence reject subsequent "next" and "stepIn"
requests from the user.
The solution is to execute the underlying finish command as a background
command, i.e. `finish &`. If we're in the outermost frame an exception
will be raised immediately, which we can now capture and report back to
the client as success=False so then the absence of a `stopped` event is
no longer a problem.
We also make use of the `defer_stop_event` option to prevent a stop
event from reaching the client until the response has been sent.
Approved-By: Tom Tromey <tom@tromey.com>
This allows a request to specify that any gdb exception raised in
exec_and_log within the gdb thread to be propagated back to the DAP
thread (using the Canceller object as the orchestrator).
Approved-By: Tom Tromey <tom@tromey.com>
The existing `send_event_later()` method allows commands processed on
the DAP thread to queue an event for execution until after the response
has been sent to the client.
We now introduce a corresponding method for use by the gdb thread. This
method `send_event_maybe_later()` will queue the event just like
`send_event_later()`, but only if it has been configured to do so by a
new @request option `defer_stop_events`. As the name implies the
functionality is currently only used for handling stop events.
Approved-By: Tom Tromey <tom@tromey.com>
Removing FPA means that in some cases we default to 'no-fpu' in the
assembler when previously we would have picked FPA-format floating
numbers. This patch fixes the testsuite fallout on a couple of
targets that are affected by this change. Where possible we do this
by adding an option to set the floating-point format, but for bad-bss
we just skip the test.
The previous commit removed a use of disassemble_info::fprintf_func
which had been added to the RISC-V disassembler after the disassembler
had been switched to use ::fprintf_styled_func, for styled output.
To prevent future mistakes, I propose adding a #define to rename
fprintf_func to something which does not exist. If this had been in
place then the before the previous commit libopcodes would have failed
to compile, like this:
../../src/opcodes/riscv-dis.c: In function ‘print_reg_list’:
../../src/opcodes/riscv-dis.c:229:7: error: ‘disassemble_info’ {aka ‘struct disassemble_info’} has no member named ‘please_use_fprintf_styled_func_instead’
229 | info->fprintf_func (info->stream, "%s", riscv_gpr_names[X_RA]);
| ^~
If this commit is accepted then I'll follow up with another commit
that adds the same #define to every disassembler that has been
converted to use styled output.
As the RISC-V disassembler is now fully styled, this commit should
make no difference at all.
I noticed that some unstyled output had crept into the risc-v
disassembler in this commit:
commit 9132c8152b
Date: Tue Feb 27 11:48:11 2024 +0800
RISC-V: Support Zcmp push/pop instructions.
this commit adds styling support. The risc-v disassembler is now once
again, fully styled.
This implements the Zvfbfwma extension, as of version 1.0.
View detailed information in:
<https://github.com/riscv/riscv-isa-manual/blob/main/src/bfloat16.adoc#zvfbfwma---vector-bf16-widening-mul-add>
1 In spec: "Zvfbfwma requires the Zvfbfmin extension and the Zfbfmin extension."
1.1 In Embedded Processor: Zvfbfwma -> Zvfbfmin -> Zve32f
1.2 In Application Processor: Zvfbfwma -> Zvfbfmin -> V
1.3 In both scenarios, there are: Zvfbfwma -> Zfbfmin
2 Depending on different usage scenarios, the Zvfbfwma extension may
depend on 'V' or 'Zve32f'. This patch only implements dependencies in
scenario of Embedded Processor. This is consistent with the processing
strategy in Zvfbfmin. In scenario of Application Processor, it is
necessary to explicitly indicate the dependent 'V' extension.
For relevant information in gcc, please refer to:
<https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=38dd4e26e07c6be7cf4d169141ee4f3a03f3a09d>
bfd/ChangeLog:
* elfxx-riscv.c (riscv_multi_subset_supports): Handle Zvfbfwma.
(riscv_multi_subset_supports_ext): Ditto.
gas/ChangeLog:
* NEWS: Updated.
* testsuite/gas/riscv/march-help.l: Ditto.
* testsuite/gas/riscv/zvfbfwma.d: New test.
* testsuite/gas/riscv/zvfbfwma.s: New test.
include/ChangeLog:
* opcode/riscv-opc.h (MATCH_VFWMACCBF16_VF): Define.
(MASK_VFWMACCBF16_VF): Ditto.
(MATCH_VFWMACCBF16_VV): Ditto.
(MASK_VFWMACCBF16_VV): Ditto.
(DECLARE_INSN): New declarations for Zvfbfwma.
* opcode/riscv.h (enum riscv_insn_class): Add
INSN_CLASS_ZVFBFWMA
opcodes/ChangeLog:
* riscv-opc.c: Add Zvfbfwma instructions.
This implements the Zvfbfmin extension, as of version 1.0.
View detailed information in:
<https://github.com/riscv/riscv-isa-manual/blob/main/src/bfloat16.adoc#zvfbfmin---vector-bf16-converts>
Depending on different usage scenarios, the Zvfbfmin extension may
depend on 'V' or 'Zve32f'. This patch only implements dependencies
in scenario of Embedded Processor. In scenario of Application
Processor, it is necessary to explicitly indicate the dependent
'V' extension.
For relevant information in gcc, please refer to:
<https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=1ddf65c5fc6ba7cf5826e1c02c569c923a541c09>
bfd/ChangeLog:
* elfxx-riscv.c (riscv_multi_subset_supports): Handle Zvfbfmin.
(riscv_multi_subset_supports_ext): Ditto.
gas/ChangeLog:
* NEWS: Updated.
* testsuite/gas/riscv/march-help.l: Ditto.
* testsuite/gas/riscv/zvfbfmin.d: New test.
* testsuite/gas/riscv/zvfbfmin.s: New test.
include/ChangeLog:
* opcode/riscv-opc.h (MATCH_VFNCVTBF16_F_F_W): Define.
(MASK_VFNCVTBF16_F_F_W): Ditto.
(MATCH_VFWCVTBF16_F_F_V): Ditto.
(MASK_VFWCVTBF16_F_F_V): Ditto.
(DECLARE_INSN): New declarations for Zvfbfmin.
* opcode/riscv.h (enum riscv_insn_class): Add
INSN_CLASS_ZVFBFMIN
opcodes/ChangeLog:
* riscv-opc.c: Add Zvfbfmin instructions.
This implements the Zfbfmin extension, as of version 1.0.
View detailed information in:
<https://github.com/riscv/riscv-isa-manual/blob/main/src/bfloat16.adoc#zfbfmin---scalar-bf16-converts>
1 The Zfbfmin extension depend on 'F', and the FLH, FSH, FMV.X.H, and
FMV.H.X instructions as defined in the Zfh extension.
2 The Zfhmin extension includes the following instructions from the Zfh
extension: FLH, FSH, FMV.X.H, FMV.H.X... View detailed information in:
<https://github.com/riscv/riscv-isa-manual/blob/main/src/zfh.adoc>
3 Zfhmin extension depend on 'F'.
4 Simply put, just make Zfbfmin dependent on Zfhmin.
Perhaps in the future, we could propose making the FLH, FSH, FMV.X.H, and
FMV.H.X instructions an independent extension to achieve precise dependency
relationships for the Zfbfmin.
5 For relevant information in gcc, please refer to:
<https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=35224ead63732a3550ba4b1332c06e9dc7999c31>
bfd/ChangeLog:
* elfxx-riscv.c (riscv_multi_subset_supports): Handle Zfbfmin.
(riscv_multi_subset_supports_ext): Ditto.
gas/ChangeLog:
* NEWS: Updated.
* testsuite/gas/riscv/march-help.l: Ditto.
* testsuite/gas/riscv/zfbfmin.d: New test.
* testsuite/gas/riscv/zfbfmin.s: New test.
include/ChangeLog:
* opcode/riscv-opc.h (MATCH_FCVT_BF16_S): Define.
(MASK_FCVT_BF16_S): Ditto.
(MATCH_FCVT_S_BF16): Ditto.
(MASK_FCVT_S_BF16): Ditto.
(DECLARE_INSN): New declarations for Zfbfmin.
* opcode/riscv.h (enum riscv_insn_class): Add INSN_CLASS_ZFBFMIN.
opcodes/ChangeLog:
* riscv-opc.c: Add Zfbfmin instructions.
aarch64-elf fails these tests due to .rela.dyn being at a different
address to that expected, and due to the symbol table being different.
Unexpected symbol numbering results in a mismatch of reloc r_info
field, but these are shown decoded so the raw field doesn't really add
anything to the test.
* testsuite/ld-aarch64/relr-align.d: Accept any address for
.relr.dyn section. Don't match raw r_info field.
* testsuite/ld-aarch64/relr-data-shared.d: Likewise.
* testsuite/ld-aarch64/relr-got-shared.d: Likewise.
* testsuite/ld-aarch64/relr-text-shared.d: Likewise.
Remove the FPA support from the disassembler. This entails a couple
of testsuite fixes where we were (probably incorrectly) disassembling
a generic co-processor instruction using the legacy FPA opcodes.
Remove the command-line options to choose the FPA (or FPE - an
emulated FPA). From this point on it should be impossible to assemble
the old FPA instructions.
Change the cases where the default FPU was FPA to none. This should
ensure that any code that used settings to pick the floating-point
order will not silently produce a different output. The options that
explicitly set the FPA remain for the moment.
Assembler directives such as .float, or .double are handled by generic
code, but on Arm, their output can vary depeding on the type of FPU
begin targetted. When we remove FPA support we don't want to silently
generate different code for processors that previously defaulted to
the FPA, so redirect these directives through a wrapper function that
checks the FPU is enabled; we use the legacy -mno-fpu in the test to
catch this.
Also fix a few tests so that they won't start to fail on targets (eg
arm-wince-pe) where there is no default format for the FPU and we pick
this from the default processor type.
The logic here seems to be overly complex, so simplify it a bit. One
particular problem was that using the legacy -mno-fpu option was not
working properly, as this has all the feature bits set to zero causing
the code to then pick a different FPU as the default. Fix this by
only selecting an FPU as a fallback if the code has not otherwise
selected one: there was only one route by which this could happen.
This patch is really a pre-cursor to the following one where we want
to make no-fpu internally a fall-back position for some legacy
processors where previously we would have dropped back to the FPA.
From armv6 onwards a lot of cores started to come with a physical VFP
implementation; but many still did not and in some cases there are
both variants. For the cores that lacked a physical VFP we would fall
back to FPU_NONE if the platform/ABI did not mandate something else.
To make matters worse, FPU_NONE is internal state used to imply
soft-fpa (ie a mixed-endian double format), so any use of .double in
hand-written assembly is almost certainly generating incorrect output.
That's undesirable, all these cores should really default to a softvfp
model.
FPU_ARCH_VFP has always meant VFP floating-point format (natural FP
word order) but without any VFP instructions. But the name
FPU_ARCH_VFP is potentially confusing. This patch just changes the
name to make the meaning clearer.
1. Combined testcases into one if they use same extention name.
2. Likewise for the fail testcases.
3. Renamed with x-cv prefix, just like what other vendors did.
gas/
* testsuite/gas/riscv/cv-alu-*: Combined and renamed to
x-cv-alu. Likewise for fail testcases, to x-cv-alu-fail*.
* testsuite/gas/riscv/cv-bi-*: Likewise, but renamed to
x-cv-bi and x-cv-bi-fail.
* testsuite/gas/riscv/cv-elw-*: Likewise, but renamed to
x-cv-elw and x-cv-elw-fail.
* testsuite/gas/riscv/cv-mac-*: Likewise, but renamed to
x-cv-mac and x-cv-mac-fail.
* testsuite/gas/riscv/cv-mem-*: Likewise, but renamed to
x-cv-mem and x-cv-mem-fail.
Spec: https://docs.openhwgroup.org/projects/cv32e40p-user-manual/en/latest/instruction_set_extensions.html
Contributors:
Mary Bennett <mary.bennett682@gmail.com>
Nandni Jamnadas <nandni.jamnadas@embecosm.com>
Pietra Ferreira <pietra.ferreira@embecosm.com>
Charlie Keaney
Jessica Mills
Craig Blackmore <craig.blackmore@embecosm.com>
Simon Cook <simon.cook@embecosm.com>
Jeremy Bennett <jeremy.bennett@embecosm.com>
Helene Chelin <helene.chelin@embecosm.com>
bfd/ChangeLog:
* elfxx-riscv.c (riscv_multi_subset_supports): Add `xcvmem`
instruction class.
(riscv_multi_subset_supports_ext): Likewise.
gas/ChangeLog:
* doc/c-riscv.texi: Note XCVmem as an additional ISA extension
for CORE-V.
* testsuite/gas/riscv/cv-mem-fail-march.d: New test.
* testsuite/gas/riscv/cv-mem-fail-march.l: New test.
* testsuite/gas/riscv/cv-mem-fail-march.s: New test.
* testsuite/gas/riscv/cv-mem-fail-operand-01.d: New test.
* testsuite/gas/riscv/cv-mem-fail-operand-01.l: New test.
* testsuite/gas/riscv/cv-mem-fail-operand-01.s: New test.
* testsuite/gas/riscv/cv-mem-fail-operand-02.d: New test.
* testsuite/gas/riscv/cv-mem-fail-operand-02.l: New test.
* testsuite/gas/riscv/cv-mem-fail-operand-02.s: New test.
* testsuite/gas/riscv/cv-mem-fail-operand-03.d: New test.
* testsuite/gas/riscv/cv-mem-fail-operand-03.l: New test.
* testsuite/gas/riscv/cv-mem-fail-operand-03.s: New test.
* testsuite/gas/riscv/cv-mem-fail-operand-04.d: New test.
* testsuite/gas/riscv/cv-mem-fail-operand-04.l: New test.
* testsuite/gas/riscv/cv-mem-fail-operand-04.s: New test.
* testsuite/gas/riscv/cv-mem-fail-operand-05.d: New test.
* testsuite/gas/riscv/cv-mem-fail-operand-05.l: New test.
* testsuite/gas/riscv/cv-mem-fail-operand-05.s: New test.
* testsuite/gas/riscv/cv-mem-lbpost.d: New test.
* testsuite/gas/riscv/cv-mem-lbpost.s: New test.
* testsuite/gas/riscv/cv-mem-lbrr.d: New test.
* testsuite/gas/riscv/cv-mem-lbrr.s: New test.
* testsuite/gas/riscv/cv-mem-lbrrpost.d: New test.
* testsuite/gas/riscv/cv-mem-lbrrpost.s: New test.
* testsuite/gas/riscv/cv-mem-lbupost.d: New test.
* testsuite/gas/riscv/cv-mem-lbupost.s: New test.
* testsuite/gas/riscv/cv-mem-lburr.d: New test.
* testsuite/gas/riscv/cv-mem-lburr.s: New test.
* testsuite/gas/riscv/cv-mem-lburrpost.d: New test.
* testsuite/gas/riscv/cv-mem-lburrpost.s: New test.
* testsuite/gas/riscv/cv-mem-lhpost.d: New test.
* testsuite/gas/riscv/cv-mem-lhpost.s: New test.
* testsuite/gas/riscv/cv-mem-lhrr.d: New test.
* testsuite/gas/riscv/cv-mem-lhrr.s: New test.
* testsuite/gas/riscv/cv-mem-lhrrpost.d: New test.
* testsuite/gas/riscv/cv-mem-lhrrpost.s: New test.
* testsuite/gas/riscv/cv-mem-lhupost.d: New test.
* testsuite/gas/riscv/cv-mem-lhupost.s: New test.
* testsuite/gas/riscv/cv-mem-lhurr.d: New test.
* testsuite/gas/riscv/cv-mem-lhurr.s: New test.
* testsuite/gas/riscv/cv-mem-lhurrpost.d: New test.
* testsuite/gas/riscv/cv-mem-lhurrpost.s: New test.
* testsuite/gas/riscv/cv-mem-lwpost.d: New test.
* testsuite/gas/riscv/cv-mem-lwpost.s: New test.
* testsuite/gas/riscv/cv-mem-lwrr.d: New test.
* testsuite/gas/riscv/cv-mem-lwrr.s: New test.
* testsuite/gas/riscv/cv-mem-lwrrpost.d: New test.
* testsuite/gas/riscv/cv-mem-lwrrpost.s: New test.
* testsuite/gas/riscv/cv-mem-sbpost.d: New test.
* testsuite/gas/riscv/cv-mem-sbpost.s: New test.
* testsuite/gas/riscv/cv-mem-sbrr.d: New test.
* testsuite/gas/riscv/cv-mem-sbrr.s: New test.
* testsuite/gas/riscv/cv-mem-sbrrpost.d: New test.
* testsuite/gas/riscv/cv-mem-sbrrpost.s: New test.
* testsuite/gas/riscv/cv-mem-shpost.d: New test.
* testsuite/gas/riscv/cv-mem-shpost.s: New test.
* testsuite/gas/riscv/cv-mem-shrr.d: New test.
* testsuite/gas/riscv/cv-mem-shrr.s: New test.
* testsuite/gas/riscv/cv-mem-shrrpost.d: New test.
* testsuite/gas/riscv/cv-mem-shrrpost.s: New test.
* testsuite/gas/riscv/cv-mem-swpost.d: New test.
* testsuite/gas/riscv/cv-mem-swpost.s: New test.
* testsuite/gas/riscv/cv-mem-swrr.d: New test.
* testsuite/gas/riscv/cv-mem-swrr.s: New test.
* testsuite/gas/riscv/cv-mem-swrrpost.d: New test.
* testsuite/gas/riscv/cv-mem-swrrpost.s: New test.
* testsuite/gas/riscv/march-help.l: Add xcvmem string.
include/ChangeLog:
* opcode/riscv-opc.h: Add corresponding MATCH and MASK macros
for XCVmem.
* opcode/riscv.h: Add corresponding EXTRACT and ENCODE macros
for XCVmem.
(enum riscv_insn_class): Add the XCVmem instruction class.
opcodes/ChangeLog:
* riscv-opc.c: Add XCVmem instructions.
Spec: https://docs.openhwgroup.org/projects/cv32e40p-user-manual/en/latest/instruction_set_extensions.html
Contributors:
Mary Bennett <mary.bennett682@gmail.com>
Nandni Jamnadas <nandni.jamnadas@embecosm.com>
Pietra Ferreira <pietra.ferreira@embecosm.com>
Charlie Keaney
Jessica Mills
Craig Blackmore <craig.blackmore@embecosm.com>
Simon Cook <simon.cook@embecosm.com>
Jeremy Bennett <jeremy.bennett@embecosm.com>
Helene Chelin <helene.chelin@embecosm.com>
Nazareno Bruschi <nazareno.bruschi@embecosm.com>
Lin Sinan
include/ChangeLog:
* opcode/riscv-opc.h: Add corresponding MATCH and MASK
macros for XCVbi.
* opcode/riscv.h: Add corresponding EXTRACT and ENCODE macros
for XCVbi.
(enum riscv_insn_class): Add the XCVbi instruction class.
gas/ChangeLog:
* config/tc-riscv.c (validate_riscv_insn): Add the necessary
operands for the extension.
(riscv_ip): Likewise.
* doc/c-riscv.texi: Note XCVbi as an additional ISA extension
for CORE-V.
* testsuite/gas/riscv/cv-bi-beqimm.d: New test.
* testsuite/gas/riscv/cv-bi-beqimm.s: New test.
* testsuite/gas/riscv/cv-bi-bneimm.d: New test.
* testsuite/gas/riscv/cv-bi-bneimm.s: New test.
* testsuite/gas/riscv/cv-bi-fail-march.d: New test.
* testsuite/gas/riscv/cv-bi-fail-march.l: New test.
* testsuite/gas/riscv/cv-bi-fail-march.s: New test.
* testsuite/gas/riscv/cv-bi-fail-operand-01.d: New test.
* testsuite/gas/riscv/cv-bi-fail-operand-01.l: New test.
* testsuite/gas/riscv/cv-bi-fail-operand-01.s: New test.
* testsuite/gas/riscv/cv-bi-fail-operand-02.d: New test.
* testsuite/gas/riscv/cv-bi-fail-operand-02.l: New test.
* testsuite/gas/riscv/cv-bi-fail-operand-02.s: New test.
* testsuite/gas/riscv/cv-bi-fail-operand-03.d: New test.
* testsuite/gas/riscv/cv-bi-fail-operand-03.l: New test.
* testsuite/gas/riscv/cv-bi-fail-operand-03.s: New test.
* testsuite/gas/riscv/march-help.l: Add xcvbi string.
include/ChangeLog:
* opcode/riscv-opc.h: Add corresponding MATCH and MASK
macros for XCVbi.
* opcode/riscv.h: Add corresponding EXTRACT and ENCODE macros
for XCVbi.
(enum riscv_insn_class): Add the XCVbi instruction class.
opcodes/ChangeLog:
* riscv-dis.c (print_insn_args): Add disassembly for new operand.
* riscv-opc.c: Add XCVbi instructions.
I noticed that the value returned by rust_llvm_version had a trailing
carriage return. I don't think this is causing any problems right
now, but looking at the code I don't think this was the desired
behaviour.
The current code runs 'rustc --version --verbose', splits the output
at each '\n' and then loops over every line looking for the line that
contains the LLVM version.
There are two problems here. First, at the end of each captured line
we have '\r\n', so when we split the lines on '\n', each of the lines
will still end with a '\r' character.
Second, though we loop over the lines, when we try to compare the line
contents we actually compare the unsplit full output. Luckily this
still finds the match, but this renders the loop over lines redundant.
This commit makes two fixes:
1. I use regsub to convert all '\r\n' sequences to '\n'; now when we
split on '\n' the lines will not end in '\r'.
2. Within the loop over lines block I now check the line contents
rather than the unsplit full output; now we capture a value
without a trailing '\r'.
There's only one test (gdb.rust/simple.exp) that uses
rust_llvm_version, and it doesn't care if there's a trailing '\r' or
not, so this change should make no difference there.
Approved-By: Tom Tromey <tom@tromey.com>
I spotted a few more places where we could apply filename styling in
remote.c and target.c. Other than the styling, there should be no
user visible changes after this commit.
Approved-By: Tom Tromey <tom@tromey.com>
A co-worker requested that the DAP code emit a scope for global
variables. It's not really practical to do this for all globals, but
it seemed reasonable to do this for globals coming from the frame's
compilation unit. For Ada in particular, this is convenient as it
exposes package-scoped variables.
Reviewed-By: Eli Zaretskii <eliz@gnu.org>
