This is a generated file name from a correspondingly named C file.
Rename it to avoid unique build rules since there's no difference
to the generated manual.
PR 28793:
The alignment may be removed in linker. We need to create new frag after
alignment to prevent the assembler from computing static offsets.
gas/
* config/tc-riscv.c (riscv_frag_align_code): Create new frag.
Fixes:
CXX ser-mingw.o
/home/simark/src/binutils-gdb/gdb/ser-mingw.c: In function ‘int pipe_windows_open(serial*, const char*)’:
/home/simark/src/binutils-gdb/gdb/ser-mingw.c:870:3: error: ‘gdb_argv’ was not declared in this scope
870 | gdb_argv argv (name);
| ^~~~~~~~
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28802
Change-Id: I7f3e8ec5f9ca8582d587545fdf6b69901259f199
I noticed two places in the docs where we appear to be missing @r.
makeinfo seems to do the correct things despite these being
missing (at least, I couldn't see any difference in the pdf or info
output), but it doesn't hurt to have the @r in place.
We found a case where --gc-sections can cause gdb to set an invalid
breakpoint. In the included test case, gdb will set a breakpoint with
two locations, one of which is 0x0.
The code in lnp_state_machine::check_line_address is intended to
filter out this sort of problem, but in this case, the entire CU is
empty, causing unrelocated_lowpc==0x0 -- which circumvents the check.
It seems to me that if a CU is empty like this, then it is ok to
simply ignore the line table, as there won't be any locations anyway.
Add `set print array-indexes' handling for Fortran arrays. Currently
the setting is ignored and indices are never shown.
Keep track of the most recent index handled so that any outstanding
repeated elements printed when the limit set by `set print elements' is
hit have the correct index shown.
Output now looks like:
(gdb) set print array-indexes on
(gdb) print array_1d
$1 = ((-2) = 1, (-1) = 1, (0) = 1, (1) = 1, (2) = 1)
(gdb) set print repeats 4
(gdb) set print elements 12
(gdb) print array_2d
$2 = ((-2) = ((-2) = 2, <repeats 5 times>) (-1) = ((-2) = 2, <repeats 5 times>) (0) = ((-2) = 2, (-1) = 2, ...) ...)
(gdb)
for a 5-element vector and a 5 by 5 array filled with the value of 2.
Add `set print repeats' tests for C/C++ arrays, complementing one for
Fortran arrays and covering the different interpretation of the `set
print elements' setting in particular where the per-dimension count of
the elements handled is matched against the trigger rather than the
total element count as with Fortran arrays.
Implement `set print repeats' handling for Fortran arrays. Currently
the setting is ignored and always treated as if no limit was set.
Unlike the generic array walker implemented decades ago the Fortran one
is a proper C++ class. Rather than trying to mimic the old walker then,
which turned out a bit of a challenge where interacting with the `set
print elements' setting, write it entirely from scratch, by adding an
extra specialization handler method for processing dimensions other than
the innermost one and letting the specialization class call the `walk_1'
method from the handler as it sees fit. This way repeats can be tracked
and the next inner dimension recursed into as a need arises only, or
unconditionally in the base class.
Keep track of the dimension number being handled in the class rather as
a parameter to the walker so that it does not have to be passed across
by the specialization class.
Use per-dimension element count tracking, needed to terminate processing
early when the limit set by `set print elements' is hit. This requires
extra care too where the limit triggers exactly where another element
that is a subarray begins. In that case rather than recursing we need
to terminate processing or lone `(...)' would be printed. Additionally
if the skipped element is the last one in the current dimension we need
to print `...' by hand, because `continue_walking' won't print it at the
upper level, because it can see the last element has already been taken
care of.
Preserve the existing semantics of `set print elements' where the total
count of the elements handled is matched against the trigger level which
is unlike with the C/C++ array printer where the per-dimension element
count is used instead.
Output now looks like:
(gdb) set print repeats 4
(gdb) print array_2d
$1 = ((2, <repeats 5 times>) <repeats 5 times>)
(gdb) set print elements 12
(gdb) print array_2d
$2 = ((2, <repeats 5 times>) (2, <repeats 5 times>) (2, 2, ...) ...)
(gdb)
for a 5 by 5 array filled with the value of 2.
Amend existing test cases accordingly that rely on the current incorrect
behavior and explicitly request that there be no limit for printing
repeated elements there.
Add suitable test cases as well covering sliced arrays in particular.
Co-Authored-By: Andrew Burgess <andrew.burgess@embecosm.com>
More fun with R_PPC64_NONE found in .opd. Fixed by the
allocate_dynrelocs and ppc64_elf_size_dynamic_sections changes, and
since we are doing ifunc, opd and SYMBOL_REFERENCES_LOCAL tests later,
don't duplicate that work in check_relocs.
* elf64-ppc.c (ppc64_elf_check_relocs): Remove opd and ifunc
conditions for rel_count.
(dec_dynrel_count): Likewise.
(allocate_dynrelocs): Test for opd and ifunc when allocating
relative relocs.
(ppc64_elf_size_dynamic_sections): Likewise.
Similarly to the local GOT case.
* elf64-ppc.c (ppc64_elf_size_dynamic_sections): Don't allocate
space for PLT relocs against local syms when enable_dt_relr.
Fixes another case where we end up with superfluous R_PPC64_NONE.
* elf64-ppc.c (ppc64_elf_size_dynamic_sections): Don't allocate
space for GOT relocs against non-TLS local syms when enable_dt_relr.
(ppc64_elf_layout_multitoc): Likewise.
HJ: "There are 238 R_PPC64_NONEs in libc.so.6 alone."
Indeed, let's make them go away. I had the SYMBOL_REFERENCES_LOCAL
test in the wrong place. check_relocs is too early to know whether a
symbol is dynamic in a shared library. Lots of glibc symbols are made
local by version script, but that doesn't happen until
size_dynamic_sections.
* elf64-ppc.c (ppc64_elf_check_relocs): Don't count relative relocs
here depending on SYMBOL_REFERENCES_LOCAL.
(dec_dynrel_count): Likewise.
(allocate_dynrelocs): Do so here instead.
Add remote_debug_printf, and use it for all debug messages controlled by
remote_debug.
Change remote_debug to be a bool, which is trivial in this case.
Change-Id: I90de13cb892faec3830047b571661822b126d6e8
Add the threads_debug_printf and THREADS_SCOPED_DEBUG_ENTER_EXIT, which
use the logging infrastructure from gdbsupport/common-debug.h. Replace
all debug_print uses that are predicated by debug_threads with
threads_dethreads_debug_printf. Replace uses of the debug_enter and
debug_exit macros with THREADS_SCOPED_DEBUG_ENTER_EXIT, which serves
essentially the same purpose, but allows showing what comes between the
enter and the exit in an indented form.
Note that "threads" debug is currently used for a bit of everything in
GDBserver, not only threads related stuff. It should ideally be cleaned
up and separated logically as is done in GDB, but that's out of the
scope of this patch.
Change-Id: I2d4546464462cb4c16f7f1168c5cec5a89f2289a
debug_threads is always used as a boolean. Except in ax.cc and
tracepoint.cc. These files have their own macros that use
debug_threads, and have a concept of verbosity level. But they both
have a single level, so it's just a boolean in the end.
Remove this concept of level. If we ever want to re-introduce it, I
think it will be better implemented in a more common location.
Change debug_threads to bool and adjust some users that were treating it
as an int.
Change-Id: I137f596eaf763a08c977dd74417969cedfee9ecf
All the Ada catchpoints use the same breakpoint_ops contents, because
the catchpoint itself records its kind. This patch simplifies the
code by removing the redundant ops structures.
The "catch exec" code is reasonably self-contained, and so this patch
moves it out of breakpoint.c (the second largest source file in gdb)
and into a new file, break-catch-exec.c.
The "catch fork" code is reasonably self-contained, and so this patch
moves it out of breakpoint.c (the second largest source file in gdb)
and into a new file, break-catch-fork.c.
event_location uses the old C-style discriminated union approach.
However, it's better to use subclassing, as this makes the code
clearer and removes some chances for error. This also enables future
cleanups to avoid manual memory management and copies.
This patch removes the old-style EL_* macros from location.c. This
cleans up the code by itself, IMO, but also enables further cleanups
in subsequent patches.
This small cleanup removes a use of xfree from location.c, by
switching to unique_xmalloc_ptr. One function is only used in
location.c, so it is made static. And, another function is changed to
avoid a copy.
Same idea as 0fab795564 ("gdb: use ptid_t::to_string in infrun debug
messages"), but throughout GDB.
Change-Id: I62ba36eaef29935316d7187b9b13d7b88491acc1
Consider this GDB session:
$ gdb -q
(gdb) target remote | gdbserver - ~/tmp/hello.x
Remote debugging using | gdbserver - ~/tmp/hello.x
... snip ...
(gdb) info connections
Num What Description
* 1 remote gdbserver - ~/tmp/hello.x Remote target using gdb-specific protocol
(gdb) python conn = gdb.selected_inferior().connection
(gdb) python print(conn.details)
gdbserver - ~/tmp/hello.x
(gdb)
I think there are two things wrong here, first in the "What" column of
the 'info connections' output, I think the text should be:
remote | gdbserver - ~/tmp/hello.x
to correctly show the user how the connection was established. And in
a similar fashion, I think that the `details` string of the
gdb.TargetConnection object should be:
| gdbserver - ~/tmp/hello.x
This commit makes this change. Currently the '|' is detected and
removed in gdb/serial.c. The string passed to the pipe_ops
structure (from gdb/ser-pipe.c), doesn't then, contain the `|`, this
is instead implied by the fact that it is a pipes based implementation
of the serial_ops interface.
After this commit we still detect the `|` in gdb/serial.c, but we now
store the full string (including the `|`) in the serial::name member
variable.
For pipe based serial connections, this name is only used for
displaying the two fields I mention above, and in pipe_open (from
gdb/ser-pipe.c), and in pipe_open, we now know to skip over the `|`.
The benefit I see from this change is that GDB's output now more
accurately reflects the commands used to start a target, thus making
it easier for a user to understand what is going on.
In the current code, if decimal floating point is not supported for
this target, there is no binary file dfp-test, and also there is no
test result after execute the following commands:
$ make check-gdb TESTS="gdb.base/dfp-test.exp"
$ grep error gdb/testsuite/gdb.log
/home/loongson/gdb.git/gdb/testsuite/gdb.base/dfp-test.c:39:1: error: decimal floating point not supported for this target
[...]
$ cat gdb/testsuite/gdb.sum
[...]
Running target unix
Running /home/loongson/gdb.git/gdb/testsuite/gdb.base/dfp-test.exp ...
=== gdb Summary ===
[...]
With this patch:
$ make check-gdb TESTS="gdb.base/dfp-test.exp"
$ cat gdb/testsuite/gdb.sum
[...]
Running target unix
Running /home/loongson/gdb.git/gdb/testsuite/gdb.base/dfp-test.exp ...
UNSUPPORTED: gdb.base/dfp-test.exp: decimal floating point not supported for this target.
=== gdb Summary ===
# of unsupported tests 1
[...]
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
