This patch adds --enable-separate-code to ld configure to turn on
-z separate-code by default and enables it by default for Linux/x86.
This avoids mixing code pages with data to improve cache performance
as well as security.
To reduce x86-64 executable and shared object sizes, the maximum page
size is reduced from 2MB to 4KB when -z separate-code is turned on by
default. Note: -z max-page-size= can be used to set the maximum page
size.
We compared SPEC CPU 2017 performance before and after this change on
Skylake server. There are no any significant performance changes.
Everything is mostly below +/-1%.
bfd/
* config.in: Regenerated.
* configure: Likewise.
* configure.ac: Add --enable-separate-code.
(DEFAULT_LD_Z_SEPARATE_CODE): New AC_DEFINE_UNQUOTED. Default
to 1 for Linux/x86 targets,
* elf64-x86-64.c (ELF_MAXPAGESIZE): Set to 0x1000 if
DEFAULT_LD_Z_SEPARATE_CODE is 1.
ld/
* NEWS: Mention --enable-separate-code.
* configure.ac: Add --enable-separate-code.
(DEFAULT_LD_Z_SEPARATE_CODE): New AC_DEFINE_UNQUOTED.
* configure.tgt: Default ac_default_ld_z_separate_code to 1 for
Linux/x86 targets.
* config.in: Regenerated.
* configure: Likewise.
* emultempl/elf32.em (gld${EMULATION_NAME}_before_parse): Set
link_info.separate_code DEFAULT_LD_Z_SEPARATE_CODE.
For 32-bit BFD, since elf64-x86-64.o isn't compiled in, "-m elf32_x86_64"
never worked. Don't add elf32_x86_64 to supported emulations with 32-bit
BFD.
* configure.tgt (i[3-7]86-*-linux-*): Move elf32_x86_64 from
targ_extra_libpath to targ64_extra_libpath.
Complement commit 26eebcf553 ("Update OpenBSD/mips64 support"),
<https://sourceware.org/ml/binutils/2005-04/msg00382.html>, which added
OpenBSD/mips64 support to GAS, and also add it to LD, avoiding a build
failure at the configuration stage, like:
*** ld does not support target mips64-unknown-openbsd
*** see ld/configure.tgt for supported targets
make[1]: *** [configure-ld] Error 1
As per OS support only include n64 MIPS emulations, and use the
traditional ones, matching the choice already made with the addition of
GAS support.
ld/
* configure.tgt <mips64el-*-openbsd*, mips64-*-openbsd*>: New
targets.
In particular this adds support for the epiphany-rtems target.
bfd/
* config.bfd (epiphany-*-elf): Accept epiphany-*-*.
ld/
* configure.tgt (epiphany-*-elf): Accept epiphany-*-*.
This patch allows AArch64 LD defaulting to ILP32 if it is configured with
aarch64*-linux-gnu_ilp32.
ld/
* configure.tgt: Set "targ_emul" to "aarch64linux32b" for
aarch64_be-*-linux-gnu_ilp32. Set "targ_emul" to "aarch64linux32" for
aarch64-*-linux-gnu_ilp32.
If we are configuring for an arc/linux target, and --with-cpu=nps400 is
used at configure time then change the default linker emulation to the
nps specific version. All of the alternative linker emulations are
still available using the -mNAME option for ld.
ld/ChangeLog:
* configure.tgt (arc*-*-linux*): Change the default linker
emulation based on --with-cpu selection.
* NEWS: Mention new configuration option.
bfd/
* config.bfd (powerpcle-*-rtems*): Do not mark as removed.
(arm-*-rtems*): Move to (arm*-*-eabi*).
(i[3-7]86-*-rtems*): Move to (i[3-7]86-*-elf*).
(m68-*-rtems*): Move to (m68*-*-elf*).
ld/
* configure.tgt (arm-*-rtems*): Move to (arm*-*-eabi*).
(bfin-*-rtems*): Move to (bfin*-*-elf*).
(i[3-7]86-*-rtems*): Move to (i[3-7]86*-*-elf*).
(m68*-*-rtems*): Move to (m68*-*-elf*).
(mips*-*-rtems*): Move to (mips*-*-elf*).
(or1k*-*-rtems*): Move to (or1k*-*-elf*).
(powerpc*-*-rtems*): Move to (powerpc*-*-elf*).
(sparc*-*-rtems*): Move to (sparc*-*-elf*).
(sparc64*-*-rtems*): Move to (sparc64*-*-elf*).
bfd * config.bfd: Add entries for i686-redox and x86_64-redox.
gas * configure.tgt: Add entry for i386-redox.
ld * configure.tgt: Add entries for x86-redox and x86_64-redox.
The arc700 nps variant uses some specific named sections to
facilitate its CMEM based instructions, which operate on memory
regions fixed at specific addresses.
This commit adds the arclinux_nps emulation, which is based on the
arclinux emulation. The new emulation uses the OTHER_SECTIONS
variable in the emulation parameters script to provide symbols
mapping to various locations in the CMEM space on nps.
The accompanying test ensures that all symbols are provided at the
correct address in the linker script.
ld/ChangeLog:
* Makefile.am: Add earclinux_nps.c target and add to
ALL_EMULATION_SOURCES.
* Makefile.in: Likewise, regenerated.
* configure.tgt: Add arclinux_nps as an extra emulation for
arc*-*-elf* and arc*-*-linux*.
* emulparams/arc-nps.sh: New file.
* emulparams/arclinux_nps.sh: New file.
* testsuite/ld-arc/arclinux-nps.d,
* testsuite/ld-arc/arclinux-nps.s: New test.
* configure.ac: Add fuchsia to targets that use ELF.
* configure: Regenerated.
bfd * configure.tgt: Add support for fuchsia (OS).
gas * configure.tgt: Add support for fuchsia (OS).
ld * Makefile.am: Add dependency information for earmelf_fuchsia.c.
* Makefile.in: Regenerate.
* configure.tgt: Add support for aarch64-*-fuchsia, arm*-*-fuchsia*, and
x86_64-*-fuchsia* targets.
* emulparams/armelf_fuchsia.sh: New file.
* emulparams/armelfb_fuchsia.sh: New file.
This fixes a few problems in the powerpc ld configury.
1) Using powerpc*le-* to test for powerpcle and powerpc64le would
incorrectly match a target triple like powerpc-apple-elf.
2) In the same vein, *64* could match 64 in the user supplied MANUF-OS
part of the target triple.
3) tooldir vars were missing, and some target aliases would result in
ridiculous values for those tdir_* vars given.
4) Since 2016-04-25, BE support was added automatically when asking
for an LE target. If that is a good idea, then so is adding LE
support when asking for BE.
* configure.tgt (powerpc*-*-linux* et al): Rewrite, adding LE
support for BE. First output all target endian configury
values, then opposite endian. Handle more tooldirs. Fix
bogus matches with strings in MANUF-OS part of target triple.
Add a configure option --enable-relro to decide whether -z relro should
be enabled in ELF linker by default. Default to yes for all Linux
targets, except FRV, HPPA, IA64 and MIPS, since many relro tests fail
on these targets.
PR ld/20283
* NEWS: Mention --enable-relro.
* configure.ac: Add --enable-relro.
(DEFAULT_LD_Z_RELRO): New. Set by --enable-relro.
* configure.tgt (ac_default_ld_z_relro): Default it to 1 for
some Linux targets.
* config.in: Regenerated.
* configure: Likewise.
* emultempl/elf32.em (gld${EMULATION_NAME}_before_parse): Set
link_info.relro to DEFAULT_LD_Z_RELRO.
* testsuite/config/default.exp (ld_elf_shared_opt): New.
* testsuite/lib/ld-lib.exp (run_dump_test): Pass
$ld_elf_shared_opt to ld for ELF targets with shared object
support.
(run_ld_link_tests): Likewise.
The `am34-*-linux*' target cannot be configured for, `am34' is not a CPU
name recognized by `config.sub'. It has never been, required code has
not been contributed to GNU config, neither before nor since the
addition of the target triplet to our configury with commit bfff164249
("Add MN10300 linker relaxation support for symbol differences") back in
2007. Also there is no difference in actual tool configuration between
the `am34-*-linux*' and `am33_2.0-*-linux*' targets, except from a
different executable prefix and tooldir name.
Given the above remove the target triplet from our configuration.
bfd/
* config.bfd: Remove `am34-*-linux*' support.
ld/
* configure.tgt: Remove `am34-*-linux*' support.
Make the little-endian emulation the default for the `mips*el-mti-elf*'
and `mips*el-img-elf*' targets, fixing the issue of LD rejecting, in its
default configuration, object files produced by GAS also in its default
configuration.
ld/
* configure.tgt <mips*el-mti-elf*, mips*el-img-elf*>: Add
targets.
ld * Makefile.am (ALL_64_EMULATION_SOURCES): Add support for
CloudABI on aarch64. For this target we have to make sure we use
ELFOSABI_CLOUDABI instead of ELFOSABI_NONE.
* configure.tgt (targ_emul): Likewise.
* emulparams/aarch64cloudabi.sh: New file.
* emulparams/aarch64cloudabib.sh: New file.
* Makefile.in: Regenerate.
bfd * config.bfd (targ_defvec): Add support for CloudABI on aarch64.
For this target we have to make sure we use ELFOSABI_CLOUDABI
instead of ELFOSABI_NONE.
* configure.ac (tb): Likewise.
* elfnn-aarch64.c: Likewise.
* targets.c (_bfd_target_vector): Likewise.
* configure: Regenerate.
gas * config/tc-aarch64.c (elf64_aarch64_target_format): Select the
cloudabi format if the TARGET_OS is cloudabi.
This patch sets the default ELF output format of assembler and linker to
EM_IAMCU when binutils is configured to i?86-*-elfiamcu target.
gas/
* configure.tgt (arch): Set to iamcu for i386-*-elfiamcu target.
* config/tc-i386.c (i386_mach): Support iamcu.
(i386_target_format): Likewise.
ld/
* configure.tgt: Support i[3-7]86-*-elfiamcu target.
ld/testsuite/
* ld-i386/i386.exp (iamcu_tests): Run iamcu-4.
* ld-i386/iamcu-4.d: New file.
At the moment it is possible to configure binutils for these triples
but the resulting linker defaults to little endian with huge numbers
of testsuite failures, which on the face of it does not appear to make
much sense.
This patch makes the behaviour similar to armeb-elf and the testsuite
is clean.
bfd/ChangeLog:
2014-08-20 Will Newton <will.newton@linaro.org>
* config.bfd: Default armeb-*-eabi* to big endian.
ld/ChangeLog:
2014-08-20 Will Newton <will.newton@linaro.org>
* configure.tgt: Default armeb-*-eabi* to big endian.
* archures.c: add avrtiny architecture for avr target.
* bfd-in2.h: Regenerate.
* cpu-avr.c (arch_info_struct): add avrtiny arch info.
* elf32-avr.c (elf_avr_howto_table): new relocation R_AVR_LDS_STS_16
added for 16 bit LDS/STS instruction of avrtiny arch.
(avr_reloc_map): reloc R_AVR_LDS_STS_16 is mapped to
BFD_RELOC_AVR_LDS_STS_16.
(bfd_elf_avr_final_write_processing): select machine number avrtiny arch.
(elf32_avr_object_p): set machine number for avrtiny arch.
* libbfd.h: Regenerate.
* reloc.c: Add documentation for BFD_RELOC_AVR_LDS_STS_16 reloc.
* config/tc-avr.c (mcu_types): Add avrtiny arch.
Add avrtiny arch devices attiny4, attiny5, attiny9, attiny10, attiny20
and attiny40.
(md_show_usage): Add avrtiny arch in usage message.
(avr_operand): validate and issue error for invalid register for avrtiny.
add new reloc exp for 16 bit lds/sts instruction.
(md_apply_fix): check 16 bit lds/sts operand for out of range and encode.
(md_assemble): check ISA for arch and issue diagnostic.
* include/elf/avr.h (E_AVR_MACH_AVRTINY): define avrtiny machine number.
(R_AVR_LDS_STS_16): define 16 bit lds/sts reloc number.
* include/opcode/avr.h (AVR_ISA_TINY): define avrtiny specific ISA.
(AVR_ISA_2xxxa): define ISA without LPM.
(AVR_ISA_AVRTINY): define avrtiny arch ISA.
Add doc for contraint used in 16 bit lds/sts.
Adjust ISA group for icall, ijmp, pop and push.
Add 16 bit lds/sts encoding and update 32 bit lds/sts constraints.
* opcodes/avr-dis.c (avr_operand): Handle constraint j for 16 bit lds/sts.
(print_insn_avr): do not select opcode if insn ISA is avrtiny and machine
is not avrtiny.
* Makefile.am (ALL_EMULATION_SOURCES): add avrtiny emulation source.
(eavrtiny.c): add rules for avrtiny emulation source.
* Makefile.in: Regenerate.
* configure.tgt: Add avrtiny to avr target emulations.
* scripttempl/avrtiny.sc: New file.
linker script template for avrtiny arch.
* emulparams/avrtiny.sh: New file.
emulation parameters for avrtiny arch.
