Making target code depend on a host define like _AIX52 is never
correct, so out it goes. Also, sort some config.bfd entries a little
to make it more obvious there is a config difference between aix5.1
and aix5.2. These two changes should make no difference to anything
in binutils. The gas define of AIX_WEAK_SUPPORT on the other hand was
wrong, so fix that. Finally, fix some testsuite fails on aix < 5.2 by
simply not running the tests.
include/
* coff/internal.h (C_WEAKEXT): Don't depend on _AIX52.
bfd/
* coffcode.h (coff_slurp_symbol_table): Don't depend on _AIX52.
(coff_classify_symbol): Likewise.
* config.bfd: Sort some entries.
gas/
* configure.ac (AIX_WEAK_SUPPORT): Don't set for aix5.[01].
* configure: Regenerate.
* testsuite/gas/ppc/aix.exp (xcoff-visibility-1*) Don't run
for aix < 5.2.
This fixes an uninitialised memory access on a fuzzed file:
0 0xf22e9b in offset_from_vma /src/binutils-gdb/bfd/elf.c:1899:2
1 0xf1e90f in _bfd_elf_get_dynamic_symbols /src/binutils-gdb/bfd/elf.c:2099:13
2 0x10e6a54 in bfd_elf32_object_p /src/binutils-gdb/bfd/elfcode.h:851:9
Hopefully it will also stop any attempt to load dynamic symbols from
eu-strip debug files.
* elfcode.h (elf_object_p): Do not attempt to load dynamic
symbols for a file with no section headers until all the
program headers are swapped in. Do not fail on eu-strip debug
files.
bfd/
* coff-rs6000.c (add_range): Revise comment, noting possible fail.
(_bfd_xcoff_openr_next_archived_file): Start with clean ranges.
binutils/
* bfdtest1.c: Enhance to catch errors on second scan.
For example, objcopy --set-section-flags .data=alloc,large will add
SHF_X86_64_LARGE to the .data section. Omitting "large" will drop the
SHF_X86_64_LARGE flag.
The bfd_section flag is named generically, SEC_ELF_LARGE, in case other
processors want to follow SHF_X86_64_LARGE. SEC_ELF_LARGE has the same
value as SEC_TIC54X_BLOCK used by coff.
bfd/
* section.c: Define SEC_ELF_LARGE.
* bfd-in2.h: Regenerate.
* elf64-x86-64.c (elf_x86_64_section_flags, elf_x86_64_fake_sections,
elf_x86_64_copy_private_section_data): New.
binutils/
* NEWS: Mention the new feature for objcopy.
* doc/binutils.texi: Mention "large".
* objcopy.c (parse_flags): Parse "large".
(check_new_section_flags): Error if "large" is used with a
non-x86-64 ELF target.
* testsuite/binutils-all/x86-64/large-sections.d: New.
* testsuite/binutils-all/x86-64/large-sections.s: New.
* testsuite/binutils-all/x86-64/large-sections-i386.d: New.
* testsuite/binutils-all/x86-64/large-sections-2.d: New.
* testsuite/binutils-all/x86-64/large-sections-2-x32.d: New.
Currently we have three instruction classes defined for Zvkh[a,b]:
- INSN_CLASS_ZVKNHA
- INSN_CLASS_ZVKNHB
- INSN_CLASS_ZVKNHA_OR_ZVKNHB
The encodings of all instructions in Zvknh[a,b] are identical.
Therefore, we don't need the individual instruction classes
and can remove them.
This patch also adds the missing support of the combined instruction
class in riscv_multi_subset_supports_ext().
Fixes: 62edb233ef ("RISC-V: Add support for the Zvknh[a,b] ISA extensions")
Reported-By: Nelson Chu <nelson@rivosinc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Zvksc is part of the vector crypto extensions.
Zvksc is shorthand for the following set of extensions:
- Zvks
- Zvbc
bfd/ChangeLog:
* elfxx-riscv.c: Define Zvksc extension.
gas/ChangeLog:
* testsuite/gas/riscv/zvksc.d: New test.
* testsuite/gas/riscv/zvksc.s: New test.
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Zvknc is part of the vector crypto extensions.
Zvknc is shorthand for the following set of extensxions:
- Zvkn
- Zvbc
bfd/ChangeLog:
* elfxx-riscv.c: Define Zvknc extension.
gas/ChangeLog:
* testsuite/gas/riscv/zvknc.d: New test.
* testsuite/gas/riscv/zvknc.s: New test.
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Zvksg is part of the vector crypto extensions.
Zvksg is shorthand for the following set of extensions:
- Zvks
- Zvkg
bfd/ChangeLog:
* elfxx-riscv.c: Define Zvksg extension.
gas/ChangeLog:
* testsuite/gas/riscv/zvksg.d: New test.
* testsuite/gas/riscv/zvksg.s: New test.
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Zvks is part of the vector crypto extensions.
Zvks is shorthand for the following set of extensions:
- Zvksed
- Zvksh
- Zvbb
- Zvkt
bfd/ChangeLog:
* elfxx-riscv.c: Define Zvks extension.
gas/ChangeLog:
* testsuite/gas/riscv/zvks.d: New test.
* testsuite/gas/riscv/zvks.s: New test.
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Zvkng is part of the vector crypto extensions.
Zvkng is shorthand for the following set of extensions:
- Zvkn
- Zvkg
bfd/ChangeLog:
* elfxx-riscv.c: Define Zvkng extension.
gas/ChangeLog:
* testsuite/gas/riscv/zvkng.d: New test.
* testsuite/gas/riscv/zvkng.s: New test.
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Certain extensions require two levels of implications. For example,
zvkng implies zvkn and zvkn implies zvkned. Enabling zvkng should also
enable zvkned.
This patch fixes this behavior.
bfd/ChangeLog:
* elfxx-riscv.c (riscv_parse_add_implicit_subsets): Allow nested
implications for extensions.
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Zvkn is part of the vector crypto extensions.
Zvkn is shorthand for the following set of extensions:
- Zvkned
- Zvknhb
- Zvbb
- Zvkt
bfd/ChangeLog:
* elfxx-riscv.c: Define Zvkn extension.
gas/ChangeLog:
* testsuite/gas/riscv/zvkn.d: New test.
* testsuite/gas/riscv/zvkn.s: New test.
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Zvksh is part of the vector crypto extensions.
This extension adds the following instructions:
- vsm3me.vv
- vsm3c.vi
bfd/ChangeLog:
* elfxx-riscv.c (riscv_multi_subset_supports): Add instruction
class support for Zvksh.
(riscv_multi_subset_supports_ext): Likewise.
gas/ChangeLog:
* testsuite/gas/riscv/zvksh.d: New test.
* testsuite/gas/riscv/zvksh.s: New test.
include/ChangeLog:
* opcode/riscv-opc.h (MATCH_VSM3C_VI): New.
(MASK_VSM3C_VI): New.
(MATCH_VSM3ME_VV): New.
(MASK_VSM3ME_VV): New.
(DECLARE_INSN): New.
* opcode/riscv.h (enum riscv_insn_class): Add instruction class
support for Zvksh.
opcodes/ChangeLog:
* riscv-opc.c: Add Zvksh instructions.
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Zvksed is part of the vector crypto extensions.
This extension adds the following instructions:
- vsm4k.vi
- vsm4r.[vv,vs]
bfd/ChangeLog:
* elfxx-riscv.c (riscv_multi_subset_supports): Add instruction
class support for Zvksed.
(riscv_multi_subset_supports_ext): Likewise.
gas/ChangeLog:
* testsuite/gas/riscv/zvksed.d: New test.
* testsuite/gas/riscv/zvksed.s: New test.
include/ChangeLog:
* opcode/riscv-opc.h (MATCH_VSM4K_VI): New.
(MASK_VSM4K_VI): New.
(MATCH_VSM4R_VS): New.
(MASK_VSM4R_VS): New.
(MATCH_VSM4R_VV): New.
(MASK_VSM4R_VV): New.
(DECLARE_INSN): New.
* opcode/riscv.h (enum riscv_insn_class): Add instruction class
support for Zvksed.
opcodes/ChangeLog:
* riscv-opc.c: Add Zvksed instructions.
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Zvknh[a,b] are parts of the vector crypto extensions.
This extension adds the following instructions:
- vsha2ms.vv
- vsha2c[hl].vv
bfd/ChangeLog:
* elfxx-riscv.c (riscv_multi_subset_supports): Add instruction
class support for Zvknh[a,b].
(riscv_multi_subset_supports_ext): Likewise.
gas/ChangeLog:
* testsuite/gas/riscv/zvknha.d: New test.
* testsuite/gas/riscv/zvknha_zvknhb.s: New test.
* testsuite/gas/riscv/zvknhb.d: New test.
include/ChangeLog:
* opcode/riscv-opc.h (MATCH_VSHA2CH_VV): New.
(MASK_VSHA2CH_VV): New.
(MATCH_VSHA2CL_VV): New.
(MASK_VSHA2CL_VV): New.
(MATCH_VSHA2MS_VV): New.
(MASK_VSHA2MS_VV): New.
(DECLARE_INSN): New.
* opcode/riscv.h (enum riscv_insn_class): Add instruction class
support for Zvknh[a,b].
opcodes/ChangeLog:
* riscv-opc.c: Add Zvknh[a,b] instructions.
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Zvkg is part of the vector crypto extensions.
This extension adds the following instructions:
- vghsh.vv
- vgmul.vv
bfd/ChangeLog:
* elfxx-riscv.c (riscv_multi_subset_supports): Add instruction
class support for Zvkg.
(riscv_multi_subset_supports_ext): Likewise.
gas/ChangeLog:
* testsuite/gas/riscv/zvkg.d: New test.
* testsuite/gas/riscv/zvkg.s: New test.
include/ChangeLog:
* opcode/riscv-opc.h (MATCH_VGHSH_VV): New.
(MASK_VGHSH_VV): New.
(MATCH_VGMUL_VV): New.
(MASK_VGMUL_VV): New.
(DECLARE_INSN): New.
* opcode/riscv.h (enum riscv_insn_class): Add instruction class
support for Zvkg.
opcodes/ChangeLog:
* riscv-opc.c: Add Zvkg instructions.
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
This patch adds support for the RISC-V Zfa extension,
which introduces additional floating-point instructions:
* fli (load-immediate) with pre-defined immediates
* fminm/fmaxm (like fmin/fmax but with different NaN behaviour)
* fround/froundmx (round to integer)
* fcvtmod.w.d (Modular Convert-to-Integer)
* fmv* to access high bits of FP registers in case XLEN < FLEN
* fleq/fltq (quiet comparison instructions)
Zfa defines its instructions in combination with the following
extensions:
* single-precision floating-point (F)
* double-precision floating-point (D)
* quad-precision floating-point (Q)
* half-precision floating-point (Zfh)
This patch is based on an earlier version from Tsukasa OI:
https://sourceware.org/pipermail/binutils/2022-September/122939.html
Most significant change to that commit is the switch from the rs1-field
value to the actual floating-point value in the last operand of the fli*
instructions. Everything that strtof() can parse is accepted and
the '%a' printf specifier is used to output hex floating-point literals
in the disassembly.
The Zfa specification is frozen (and has passed public review). It is
available as a chapter in "The RISC-V Instruction Set Manual: Volume 1":
https://github.com/riscv/riscv-isa-manual/releases
bfd/ChangeLog:
* elfxx-riscv.c (riscv_multi_subset_supports): Add instruction
class support for 'Zfa' extension.
(riscv_multi_subset_supports_ext): Likewise.
(riscv_implicit_subsets): Add 'Zfa' -> 'F' dependency.
gas/ChangeLog:
* config/tc-riscv.c (flt_lookup): New helper to lookup a float value
in an array.
(validate_riscv_insn): Add 'Wfv' as new format string directive.
(riscv_ip): Likewise.
* doc/c-riscv.texi: Add floating-point chapter and describe
limiations of the Zfa FP literal parsing.
* testsuite/gas/riscv/zfa-32.d: New test.
* testsuite/gas/riscv/zfa-32.s: New test.
* testsuite/gas/riscv/zfa-64.d: New test.
* testsuite/gas/riscv/zfa-64.s: New test.
* testsuite/gas/riscv/zfa-fail.d: New test.
* testsuite/gas/riscv/zfa-fail.l: New test.
* testsuite/gas/riscv/zfa-fail.s: New test.
* testsuite/gas/riscv/zfa.d: New test.
* testsuite/gas/riscv/zfa.s: New test.
* testsuite/gas/riscv/zfa.s: New test.
* opcode/riscv-opc.h (MATCH_FLI_H): New.
(MASK_FLI_H): New.
(MATCH_FMINM_H): New.
(MASK_FMINM_H): New.
(MATCH_FMAXM_H): New.
(MASK_FMAXM_H): New.
(MATCH_FROUND_H): New.
(MASK_FROUND_H): New.
(MATCH_FROUNDNX_H): New.
(MASK_FROUNDNX_H): New.
(MATCH_FLTQ_H): New.
(MASK_FLTQ_H): New.
(MATCH_FLEQ_H): New.
(MASK_FLEQ_H): New.
(MATCH_FLI_S): New.
(MASK_FLI_S): New.
(MATCH_FMINM_S): New.
(MASK_FMINM_S): New.
(MATCH_FMAXM_S): New.
(MASK_FMAXM_S): New.
(MATCH_FROUND_S): New.
(MASK_FROUND_S): New.
(MATCH_FROUNDNX_S): New.
(MASK_FROUNDNX_S): New.
(MATCH_FLTQ_S): New.
(MASK_FLTQ_S): New.
(MATCH_FLEQ_S): New.
(MASK_FLEQ_S): New.
(MATCH_FLI_D): New.
(MASK_FLI_D): New.
(MATCH_FMINM_D): New.
(MASK_FMINM_D): New.
(MATCH_FMAXM_D): New.
(MASK_FMAXM_D): New.
(MATCH_FROUND_D): New.
(MASK_FROUND_D): New.
(MATCH_FROUNDNX_D): New.
(MASK_FROUNDNX_D): New.
(MATCH_FLTQ_D): New.
(MASK_FLTQ_D): New.
(MATCH_FLEQ_D): New.
(MASK_FLEQ_D): New.
(MATCH_FLI_Q): New.
(MASK_FLI_Q): New.
(MATCH_FMINM_Q): New.
(MASK_FMINM_Q): New.
(MATCH_FMAXM_Q): New.
(MASK_FMAXM_Q): New.
(MATCH_FROUND_Q): New.
(MASK_FROUND_Q): New.
(MATCH_FROUNDNX_Q): New.
(MASK_FROUNDNX_Q): New.
(MATCH_FLTQ_Q): New.
(MASK_FLTQ_Q): New.
(MATCH_FLEQ_Q): New.
(MASK_FLEQ_Q): New.
(MATCH_FCVTMOD_W_D): New.
(MASK_FCVTMOD_W_D): New.
(MATCH_FMVH_X_D): New.
(MASK_FMVH_X_D): New.
(MATCH_FMVH_X_Q): New.
(MASK_FMVH_X_Q): New.
(MATCH_FMVP_D_X): New.
(MASK_FMVP_D_X): New.
(MATCH_FMVP_Q_X): New.
(MASK_FMVP_Q_X): New.
(DECLARE_INSN): New.
* opcode/riscv.h (enum riscv_insn_class): Add instruction
classes for the Zfa extension.
opcodes/ChangeLog:
* riscv-dis.c (print_insn_args): Add support for
new format string directive 'Wfv'.
* riscv-opc.c: Add Zfa instructions.
Co-Developed-by: Tsukasa OI <research_trasio@irq.a4lg.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Co-Developed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
SFrame version 2 encodes the size of repetitive insn block explicitly
in the format. Add information in the SFrame FDE to convey the size
of the block of repeating instructions. This information is used only
for SFrame FDEs of type SFRAME_FDE_TYPE_PCMASK.
Introduce two extra bytes for padding: this ensures that the memory
accesses to the members of the SFrame Frame Descriptor Entry (FDE) are
naturally aligned.
gas generates SFrame section with version SFRAME_VERSION_2 by default.
libsframe provides two new APIs to:
- get an SFrame FDE data from the decoder context, and
- add an SFrame FDE to the encoder context.
The additional argument (for rep_block_size) is useful for SFrame FDEs
where FDE type is SFRAME_FDE_TYPE_PCMASK.
The linker will generate the output SFrame sections in the
SFRAME_VERSION_2 format. If the input sections offered to the linker
are not all in the SFRAME_VERSION_2 format, the linker issues an error
to the user.
objdump/readelf will show the following message to the user if .sframe
section in SFRAME_VERSION_1 format is seen:
"No further information can be displayed. SFrame version not
supported."
In other words, like the rest of the binutils, only the current SFrame
format version, i.e., SFRAME_VERSION_2 is supported by the textual dump
facilities.
bfd/
* elf-sframe.c (_bfd_elf_merge_section_sframe): Generate an
output SFrame section with version SFRAME_VERSION_2. Also,
error out if the SFrame sections do not all have
SFRAME_VERSION_2.
* elfxx-x86.c (_bfd_x86_elf_create_sframe_plt): Generate SFrame
section for plt entries with version SFRAME_VERSION_2.
gas/
* gen-sframe.c (sframe_set_version): Update to SFRAME_VERSION_2.
(output_sframe): Likewise.
gas/testsuite/
* gas/cfi-sframe/cfi-sframe-aarch64-1.d: Use SFRAME_VERSION_2.
* gas/cfi-sframe/cfi-sframe-aarch64-2.d: Likewise.
* gas/cfi-sframe/cfi-sframe-aarch64-pac-ab-key-1.d: Likewise.
* gas/cfi-sframe/cfi-sframe-common-1.d: Likewise.
* gas/cfi-sframe/cfi-sframe-common-2.d: Likewise.
* gas/cfi-sframe/cfi-sframe-common-3.d: Likewise.
* gas/cfi-sframe/cfi-sframe-common-4.d: Likewise.
* gas/cfi-sframe/cfi-sframe-common-5.d: Likewise.
* gas/cfi-sframe/cfi-sframe-common-6.d: Likewise.
* gas/cfi-sframe/cfi-sframe-common-7.d: Likewise.
* gas/cfi-sframe/cfi-sframe-common-8.d: Likewise.
* gas/cfi-sframe/cfi-sframe-x86_64-1.d: Likewise.
* gas/cfi-sframe/common-empty-1.d: Likewise.
* gas/cfi-sframe/common-empty-2.d: Likewise.
* gas/cfi-sframe/common-empty-3.d: Likewise.
ld/testsuite/
* ld-aarch64/sframe-simple-1.d: Adjust for SFRAME_VERSION_2.
* ld-x86-64/sframe-plt-1.d: Likewise.
* ld-x86-64/sframe-simple-1.d: Likewise.
libsframe/
* libsframe.ver: Add the new APIs.
* sframe.c (sframe_decoder_get_funcdesc_v2): New definition.
(sframe_encoder_add_funcdesc_v2): Likewise.
(sframe_header_sanity_check_p): Include SFRAME_VERSION_2.
(sframe_fre_check_range_p): Get rep_block_size info from SFrame
FDE.
* sframe-dump.c (dump_sframe_header): Add support for
SFRAME_VERSION_2.
(dump_sframe): Inform user if SFrame section in SFRAME_VERSION_1
format is seen.
libsframe/testsuite/
* libsframe.decode/DATA-BE: Regenerated data file.
* libsframe.decode/DATA1: Likewise.
* libsframe.decode/DATA2: Likewise.
* libsframe.find/plt-findfre-1.c: Use new API in the testcase.
include/
* sframe.h: Add member to encode size of the code block of
repeating instructions. Add 2 bytes of padding.
* sframe-api.h (sframe_decoder_get_funcdesc_v2): New
declaration.
(sframe_encoder_add_funcdesc_v2): Likewise.
When there is no section header in an executable or shared library, we
reconstruct dynamic symbol table from the PT_DYNAMIC segment, which
contains DT_HASH/DT_GNU_HASH/DT_MIPS_XHASH, DT_STRTAB, DT_SYMTAB,
DT_STRSZ, and DT_SYMENT entries, to improve nm and objdump. For DT_HASH,
the number of dynamic symbol table entries equals the number of chains.
For DT_GNU_HASH/DT_MIPS_XHASH, only defined symbols with non-STB_LOCAL
indings are in hash table. Since DT_GNU_HASH/DT_MIPS_XHASH place all
symbols with STB_LOCAL binding before symbols with other bindings and
all undefined symbols defined ones in dynamic symbol table, the highest
symbol index in DT_GNU_HASH/DT_MIPS_XHASH is the highest dynamic symbol
table index. We can also get symbol version from DT_VERSYM, DT_VERDEF
and DT_VERNEED entries.
dt_symtab, dt_versym, dt_verdef, dt_verneed, dt_symtab_count,
dt_verdef_count, dt_verneed_count and dt_strtab are added to
elf_obj_tdata to store dynamic symbol table information.
PR ld/25617
* elf-bfd.h (elf_obj_tdata): Add dt_symtab, dt_verdef, dt_verneed,
dt_symtab_count, dt_verdef_count, dt_verneed_count and dt_strtab.
(elf_use_dt_symtab_p): New.
(_bfd_elf_get_dynamic_symbols): Likewise.
(_bfd_elf_get_section_from_dynamic_symbol): Likewise.
* elf.c (bfd_elf_get_elf_syms): Use dynamic symbol table if
neeeded.
(_bfd_elf_get_dynamic_symtab_upper_bound): Likewise.
(_bfd_elf_slurp_version_tables): Likewise.
(offset_from_vma): New function.
(get_hash_table_data): Likewise.
(_bfd_elf_get_dynamic_symbols): Likewise.
(_bfd_elf_get_section_from_dynamic_symbol): Likewise.
(_bfd_elf_get_symbol_version_name): Likewise.
* elfcode.h (elf_object_p): Call _bfd_elf_get_dynamic_symbols
to reconstruct dynamic symbol table from PT_DYNAMIC segment if
there is no section header.
(elf_slurp_symbol_table): Use dynamic symbol table if neeeded.
Don't free isymbuf when dynamic symbol table is used.
* elflink.c (elf_link_is_defined_archive_symbol): Return wrong
format error when dynamic symbol table is used.
(elf_link_add_object_symbols): Likewise.
Discard non-alloc sections when section headers are stripped.
bfd/
PR ld/25617
* elf.c (_bfd_elf_assign_file_positions_for_non_load): Skip
non-load sections without section header.
(_bfd_elf_write_object_contents): Don't set the sh_name field
without section header. Write out the .shstrtab section only
if its sh_offset field isn't -1.
binutils/
PR ld/25617
* objcopy.c (is_strip_section_1): Remove non-alloc sections for
--strip-section-headers.
ld/
PR ld/25617
* ldlang.c (lang_discard_section_p): Discard non-alloc sections
if we are stripping section headers.
Use uint8_t consistently for identifying ABI/arch in SFrame format.
bfd/
* elf-sframe.c (_bfd_elf_merge_section_sframe):
libsframe/
* sframe-dump.c (is_sframe_abi_arch_aarch64): Use uint8_t for
local variable.
* sframe.c (sframe_decoder_get_abi_arch): Update return type to
uint8_t.
(sframe_encoder_get_abi_arch): Likewise.
include/
* sframe-api.h (sframe_decoder_get_abi_arch): Likewise.
(sframe_encoder_get_abi_arch): Likewise.
