2005-10-24 Jan Beulich <jbeulich@novell.com>
* ia64.h (enum ia64_opnd): Move memory operand out of set of
indirect operands.
bfd/
2005-10-24 Jan Beulich <jbeulich@novell.com>
* cpu-ia64-opc.c (elf64_ia64_operands): Move memory operand out of
set of indirect operands.
gas/
2005-10-24 Jan Beulich <jbeulich@novell.com>
* config/tc-ia64.c (enum reg_symbol): Delete IND_MEM.
(dot_rot): Change type of num_* variables. Check for positive count.
(ia64_optimize_expr): Re-structure.
(md_operand): Check for general register.
gas/testsuite/
2005-10-24 Jan Beulich <jbeulich@novell.com>
* gas/ia64/index.[sl]: New.
* gas/ia64/rotX.[sl]: New.
* gas/ia64/ia64.exp: Run new tests.
opcodes/
2005-10-24 Jan Beulich <jbeulich@novell.com>
* ia64-asmtab.c: Regenerate.
2005-10-24 Jan Beulich <jbeulich@novell.com>
* config/tc-ia64.c (declare_register): Call symbol_create.
(md_begin): Remove local variables total, ar_base, and cr_base.
Start loops for registers at their respective first one. Don't
update md.regsym for alias names. Generate alias name tp for r13.
gas/testsuite/
2005-10-24 Jan Beulich <jbeulich@novell.com>
* gas/ia64/regs.pl: Also check tp alias of r13.
* gas/ia64/regs.s: Regenerate.
* gas/ia64/regs.d: Adjust.
into jrc/jalrc versions if ISA_MIPS32+ and not doing the swap,
hence avoiding to emit a nop.
* gas/mips/mips.exp: Run new test.
* gas/testsuite/gas/mips/mips16e-jrc.s: New test for converting
jalr/jr to the compact jalrc/jrc instructions.
* gas/testsuite/gas/mips/mips16e-jrc.d: New.
- allowing true forward references (which will always assume the referenced
symbols have at the point of use) through the new .eqv pseudo-op and the
new == operator
- disallowing changing .equiv-generated equates (so that the protection this
provides is both forward and backward)
- snapshotting equates when their value gets changed so that previous uses
don't get affected by the new value.
- allowing expressions in places where absolute expressions (or register
names) are needed which were not completely resolvable at the point of
their definition but which are fully resolvable at the point of use
In addition it fixes PR/288.
(parse_reg_without_prefix): New function.
(parse_reg): Check for '$' register prefix if --allow-reg-prefix is set.
(option md_longopts): Add allow-reg-prefix option.
* doc/c-sh.texi: Document --allow-reg-prefix option.
* NEWS: Mention the new switch.
* gas/sh/basic.exp: Run reg-prefix test.
* gas/sh/reg-prefix.s: New
* gas/sh/reg-prefix.d: New
2005-09-29 Jan Beulich <jbeulich@novell.com>
* config/tc-ia64.c (parse_operands): Always parse first operand of
alloc.
gas/testsuite/
2005-09-29 Jan Beulich <jbeulich@novell.com>
* gas/ia64/alloc.[sl]: New.
* gas/ia64/ia64.exp: Run new test.
2005-09-28 Jan Beulich <jbeulich@novell.com>
* gas/i386/x86-64-stack.s, gas/i386/x86-64-stack.d,
gas/i386/x86-64-stack-suffix.d, gas/i386/x86-64-stack-intel.d: New.
* gas/i386/i386.exp: Run new tests.
ld/testsuite/
2005-09-28 Jan Beulich <jbeulich@novell.com>
* ld-x86-64/tlspic.dd: Adjust.
opcodes/
2005-09-28 Jan Beulich <jbeulich@novell.com>
* i386-dis.c (stack_v_mode): Renamed from branch_v_mode.
(indirEv): Use it.
(stackEv): New.
(Ob64, Ov64): Rename to Ob, Ov. Delete unused original definitions.
(dis386): Document and use new 'V' meta character. Use it for
single-byte push/pop opcode forms. Use stackEv for mod-r/m push/pop
opcode forms. Correct typo in 'pop ss'. Replace Ob64/Ov64 by Ob/Ov.
(putop): 'q' suffix for 'T' and 'U' meta depends on DFLAG. Mark
data prefix as used whenever DFLAG was examined. Handle 'V'.
(intel_operand_size): Use stack_v_mode.
(OP_E): Use stack_v_mode, but handle only the special case of
64-bit mode without operand size override here; fall through to
v_mode case otherwise.
(OP_REG): Special case rAX_reg ... rDI_reg only when 64-bit mode
and no operand size override is present.
(OP_J): Use get32s for obtaining the displacement also when rex64
is present.
(dwarf2_set_isa): New.
(dwarf2_directive_loc): Rearrange to allow all options on one line.
* dwarf2dbg.h (dwarf2_set_isa): Declare.
* doc/as.texinfo: Update .loc documentation.
* gas/lns/lns-common-1.d: Don't match header or special opcode numbers.
* gas/lns/lns-common-1.s: Update for syntax change.
* gas/lns/lns-diag-1.[sl]: Likewise.
bfd/
* libbdf.h: Regenerate.
* bfd-in2.h: Regenerate.
* reloc.c: Add BFD_RELOC_ARM_T32_CP_OFF_IMM and
BFD_RELOC_ARM_T32_CP_OFF_IMM_S2.
gas/
* config/tc-arm.c (encode_arm_cp_address): Use
BFD_RELOC_ARM_T32_CP_OFF_IMM in thumb mode.
(do_iwmmxt_wldstbh): Use BFD_RELOC_ARM_T32_CP_OFF_IMM_S2 in thumb
mode.
(md_assemble): Only allow coprocessor instructions when Thumb-2 is
available.
(cCE, cC3): Define.
(insns): Use them for coprocessor instructions.
(md_pcrel_from_section): Handle BFD_RELOC_ARM_T32_CP_OFF_IMM.
(get_thumb32_insn): New function.
(put_thumb32_insn): New function.
(md_apply_fix): Handle BFD_RELOC_ARM_T32_CP_OFF_IMM and
BFD_RELOC_ARM_T32_CP_OFF_IMM_S2.
gas/testsuite/
* gas/arm/vfp-bad_t2.d, gas/arm/vfp-bad_t2.l, arm/vfp-bad_t2.s,
gas/arm/vfp1_t2.d, gas/arm/vfp1_t2.s, gas/arm/vfp1xD_t2.d,
gas/arm/vfp1xD_t2.s, gas/arm/vfp2_t2.d, gas/arm/vfp2_t2.s): New files.
opcodes/
* arm-dis.c (coprocessor_opcodes): New.
(arm_opcodes, thumb32_opcodes): Remove coprocessor insns.
(print_insn_coprocessor): New function.
(print_insn_arm): Use print_insn_coprocessor. Remove coprocessor
format characters.
(print_insn_thumb32): Use print_insn_coprocessor.
2005-08-26 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (intel_e09): Set JumpAbsolute when seeing a PTR-
qualified operand of a branch.
(intel_bracket_expr): Set JumpAbsolute here...
(intel_e11): ... rather than here.
gas/testsuite/
2005-08-26 Jan Beulich <jbeulich@novell.com>
* gas/i386/intel.s: Adjust.
* gas/i386/intelok.s: Add two more insns.
* gas/i386/intelok.d: Adjust.
2005-08-26 Jan Beulich <jbeulich@novell.com>
* i386-dis.c (intel_operand_size): New, broken out from OP_E for
re-use.
(OP_E): Call intel_operand_size, move call site out of mode
dependent code.
(OP_OFF): Call intel_operand_size if suffix_always. Remove
ATTRIBUTE_UNUSED from parameters.
(OP_OFF64): Likewise.
(OP_ESreg): Call intel_operand_size.
(OP_DSreg): Likewise.
(OP_DIR): Use colon rather than semicolon as separator of far
jump/call operands.
gas/testsuite/
2005-08-26 Jan Beulich <jbeulich@novell.com>
* gas/i386/intelok.d: Adjust.
2005-08-22 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (object_64bit): New.
(i386_target_format): Initialize it.
(output_disp): Use object_64bit for relocation type determination.
(output_imm): Likewise.
(i386_validate_fix): Likewise.
(tc_gen_reloc): Likewise.
(lex_got): Likewise. Remove static mode_name. Change array size
of gotrel's rel field, and adjust its initializer. Adjust diagnostic.
(x86_cons): Use object_64bit for deciding whether quad fields can
have relocations.
gas/testsuite/
2005-08-22 Jan Beulich <jbeulich@novell.com>
* gas/i386/mixed-mode-reloc.s, gas/i386/mixed-mode-reloc32.d,
gas/i386/mixed-mode-reloc64.d: New.
* gas/i386/i386.exp: Run new tests.
gas/
* config/tc-arm.c (current_it_mask, current_cc): New variables.
(do_t_add_sub): Use correct encodings inside IT block.
(do_t_arit3c): Ditto.
(do_t_it): Simplify logic. Set current_it_mask and current_cc.
(md_assemble): Verify conditional suffixes agains IT blocks.
gas/testsuite/
* gas/arm/thumb32.s: Use correct conditional suffixes inside IT
blocks.
* gas/arm/thumb2_it.d, gas/arm/thumb2_it.s: New test.
