to char, since everything passed in and out of dcache is char or casted
to appropriate type anyway.
(dcache_alloc): Move assignment of db out of test and combine separate
tests into if-else.
(dcache_peek_byte): Change ptr from unsigned char* to char*.
(dcache_peek_byte): Remove now unnecessary cast in read_memory call.
(dcache_peek): Change cast of incoming data arg.
(dcache_poke): Change cast of addr of incoming data arg.
(dcache_info): Mask data passed to printf_filtered to lsbyte only.
(dcache_info): Change printf_filtered arg from "% 2x" to " %2x".
* target.c (debug_to_thread_alive): Change return type to int and
return zero, for type compatibility with other *_thread_alive funcs.
(cleanup_target): Change cast of ignore function to match type of the
to_thread_alive member.
* defs.h (error_hook): Add ATTR_NORETURN.
* defs.h (NORETURN, ATTR_NORETURN): Switch from volatile to
__attribute__ method with gcc 2.7, to avoid gcc 2.6.3 bug.
* remote.c (remote_wait): Cast first arg to strtol, strchr, and strncmp
to "const char *" from "unsigned char *".
(remote_wait): Cast arg to putpkt and strcpy from "unsigned char *" to
"char *".
(remote_wait): Change printf format for long arg from "%d" to "%ld".
(getpkt): Remove unused variable "bp".
(remote_fetch_word, remote_store_word): Ifdef out apparently unused
functions.
* breakpoint.c (watchpoint_check): Removed unused variables
"saved_level" and "saved_frame".
* valops.c (value_arg_coerce): Add other enum TYPE_CODE_* and
default cases to switch for completeness.
* infrun.c (wait_for_inferior): Enclose "have_waited" label
in #ifdef that matches the one in which it is referenced.
* ser-unix.c (hardwire_noflush_set_tty_state): Enclose otherwise
unused variable "state" in #ifdef that matches one in which it is
referenced.
* eval.c (evaluate_subexp_standard): Remove unused variable "var".
* eval.c (evaluate_subexp_standard): Remove unused variable "tmp_symbol".
* valarith.c (value_subscript): Remove unused variable "lowerbound",
which is redeclared in a nested scope prior to use.
* printcmd.c (print_frame_nameless_args): Use "%ld" to print long
arg, not "%d".
* {mem-break.c, remote-pa.c, remote.c, saber.suppress}:
Remove unused static var "check_break_insn_size".
* buildsym.c (finish_block): Add other enum LOC_* and default
cases to switch for completeness.
ch-lang.c (type_lower_upper): Removed unused label "retry".
Add other enum TYPE_* and default cases to switch for completeness.
* f-typeprint.c (f_type_print_args): Ifdef out unused function
that may be used someday when Fortran support is complete.
* ch-valprint.c (chill_print_type_scalar): Add other enum
TYPE_* and default cases to switch for completeness.
(chill_val_print): Remove unused local var "high_bound" that
is redeclared in a nested scope prior to use.
(chill_var_print): Use "%ld" to print long arg, not "%d".
* regex.c (re_compile_fastmap, re_match_2): Add remaining enum types
and default to switches for completeness.
* minsyms.c (lookup_minimal_symbol_text): Delete unused variable
"trampoline_symbol".
(prim_record_minimal_symbol_and_info): Return NULL rather than trash.
* elfread.c (elf_symtab_read): Don't dereference NULL returns from
record_minimal_symbol_and_info.
* f-lang.c (saved_function_list_end): Ifdef out unused variable
that may be used someday.
* f-valprint.c (f_val_print): Remove unused local variable "straddr".
(coffstab_build_psymtabs): Remove staboff and stabsize parameters.
Add textaddr, textsize, and stabs parameters.
* gdb-stabs.h (struct dbx_symfile_info): Remove text_sect field.
Add text_addr and text_size fields.
(DBX_TEXT_SECT): Don't define.
(DBX_TEXT_ADDR, DBX_TEXT_SIZE): Define.
* coffread.c: Include <ctype.h>.
(struct coff_symfile_info): Remove stabsect and stabindexsect
fields. Add textaddr, textsize, and stabsects fields.
(coff_locate_sections): Record the address of the .text section,
and total the sizes of all sections with names beginning with
".text". Don't bother to record a .stab.index section (COFF
doesn't use them). Make a linked list of all sections with names
beginning with ".stab".
(coff_symfile_read): Adjust call to coffstab_build_psymtabs for
new parameters.
* dbxread.c (dbx_symfile_read): Use DBX_TEXT_ADDR and
DBX_TEXT_SIZE, rather than getting both from DBX_TEXT_SECT.
(dbx_symfile_init): Set DBX_TEXT_ADDR and DBX_TEXT_SIZE, not
DBX_TEXT_SECT.
(elfstab_build_psymtabs): Likewise.
(stabsect_build_psymtabs): Likewise.
(symbuf_sections, symbuf_left, symbuf_read): New static variables.
(fill_symbuf): If symbuf_sections is not NULL, read symbols from
multiple sections.
(coffstab_build_psymtabs): Remove staboffset and stabsize
parameters. Add textaddr, textsize, and stabsects parameters.
Set DBX_TEXT_ADDR and DBX_TEXT_SIZE, not DBX_TEXT_SECT. Handle
multiple stabs sections.
* os9kread.c (os9k_symfile_read): Use DBX_TEXT_ADDR and
DBX_TEXT_SIZE, rather than getting both from DBX_TEXT_SECT.
(os9k_symfile_init): Set DBX_TEXT_ADDR and DBX_TEXT_SIZE, not
DBX_TEXT_SECT.
PR 7241.
for OSF/1-3.x procfs support.
* configure.in (alpha-dec-osf): Use them when configuring
for OSF/1-3.x.
* configure: Updated.
* target.c: Include <string.h>.
* gdb.base/{sigall.c signals.c}: Define away signal() and alarm()
for sh-hms targets, allowing these tests to link, with no other
changes. Testing is suppressed by setting "nosignals" in site.exp.
targets except some specific ones that are known to not support signals.
Also clean up formatting.
* gdb.base/Makefile.in (EXECUTABLES): Remove sigall and signals.
(signals, sigall): Remove rules to build.
* gdb.base/{sigall.c, sigall.exp, signals.c, signals.exp}:
Moved to new gdb.signals directory.
* gdb.signals: New test directory.
* gdb.signals/{Makefile.in, configure.in, sigall.c, sigall.exp,
signals.c signals.exp}: New or moved files.
another, save infrun's state for the old thread and load infrun's
previous state for the new thread.
* thread.c (struct thread_info): Add new fields for thread specific
state saved/restored in infrun.c.
(add_thread): Initialize new fields.
(load_infrun_state): New function.
(save_infrun_state): New function.
* thread.h (load_infrun_state): Provide external decl.
(save_infrun_state): Likewise.
More single-stepping patches for lynx-6100.
wrong thread, make sure to write the fixed PC value into the thread
that stopped. Restart all threads after single stepping over a
breakpoint for a different thread.
* breakpoint.c (set_momentary_breakpoint): Make momentary
breakpoints thread specific in a multi-threaded program.
* lynx-nat.c (child_resume): Add some comments. Correctly
choose between the single and multi-threaded step and continue
ptrace calls.
Some of the lynx-6100 single stepping fixes.
should be char *, not unsigned char *.
* dcache.h (memxferfunc): Ditto.
* monitor.c (monitor_write_memory, monitor_read_memory_single):
Ditto.
(monitor_make_srec): Let compiler figure size of hextab.
to the top of child_wait; let the machine independent code in
wait_for_inferior deal with new thread notifications.
lynx-6100 (partial)
Fixes SEGV when multi-threaded program hits a breakpoint in a new
thread.
* monitor.c: Turn on caching.
(monitor_printf): If a ^C was sent, don't expect to see its
echo.
(monitor_open): Enable caching.
(monitor_resume, monitor_load): Flush cache.
(monitor_xfer_memory): Call cache routine.
(monitor_dump_regs): New.
(monitor_fetch_registers): If monitor_dump_regs available
then use it.
(monitor_load): Don't ref exec_bfd if it's NULL.
(monitor_load_srec): Use new monitor_make_srec calling convention.
(monitor_make_srec): Rewrite to cope with two, three and four byte
addresses.
* remote-hms.c (hms_cmds): Initialze end-of-command delim.
* dcache.h, dcache.h: Rewritten.
* remote.c: Reenable caching.
(getpkt): Reduce MAX_TRIES to 3.
(remote_xfer_memory): Use dcache_xfer_memory.
* defs.h (error_hook): New.
* top.c (error_hook): New definition.
* utils.c (error): Use error_hook if initialized.
* sparcl-tdep.c (HAVE_SOCKETS): Don't define if GO32 or WIN32. Use
HAVE_SOCKETS in place of #ifndef GO32.
* monitor.c: Turn on caching.
(monitor_printf): If a ^C was sent, don't expect to see its
echo.
(monitor_open): Enable caching.
(monitor_resume, monitor_load): Flush cache.
(monitor_xfer_memory): Call cache routine.
(monitor_dump_regs): New.
(monitor_fetch_registers): If monitor_dump_regs available
then use it.
(monitor_load): Don't ref exec_bfd if it's NULL.
(monitor_load_srec): Use new monitor_make_srec calling convention.
(monitor_make_srec): Rewrite to cope with two, three and four byte
addresses.
* remote-hms.c (hms_cmds): Initialze end-of-command delim.
* dcache.h, dcache.h: Rewritten.
* remote.c: Reenable caching.
(getpkt): Reduce MAX_TRIES to 3.
(remote_xfer_memory): Use dcache_xfer_memory.
* defs.h (error_hook): New.
* top.c (error_hook): New definition.
* utils.c (error): Use error_hook if initialized.
* sparcl-tdep.c (HAVE_SOCKETS): Don't define if GO32 or WIN32. Use
HAVE_SOCKETS in place of #ifndef GO32.
(INSTRUCTION_NULLIFIED): Allow specific targets to override.
* config/pa/tm-hppao.h (INSTRUCTION_NULLIFIED): Define to work
around losing mach kernel behavior.
* (create_file_win create_asm_win build_framework): Create null
bindings for meta keys to keep window from dropping down to
insertion point when meta is pressed by itself. New bindings:
Up/Down - Scroll up/down one line at a time
Next/Prior - Scroll up/down one page at a time
Home/End - Warp to current pc/end of file
* (build_framework): Turn on breakpoint menu.
* (create_command_window): Implement tab completion. Add binding
for ^C to stop target.
Don't assume the first entry on dld's library list is the main
program. Don't load the same library more than once and don't
consider the main program a shared library.
(som_solib_sharedlibrary_command): New function
(_initialize_som_solib): Add "sharedlibrary" command.
mentor-7135
* remote-hms.c (hms_open): Make static.
* mpw-config.in (MacSerial.h): Copy from version in {CIncludes},
not {MPW}Interfaces:CIncludes.
* ser-mac.c (mac_baud_rate_table): Fix value for 38400 baud.
* expression.h (enum exp_opcode): Added UNOP_LOWER, UNOP_UPPER,
UNUP_LENGTH.
* expprint.c (dump_expression): Handle the new exp_opcodes.
(print_subexp): Handle PREC_BUILTIN_FUNCTION.
(print_simple_m2_func): Removed.
(print_subexp): Remove support for Modula2 builtin functions.
* m2-lang.c (m2_op_print_tab): Add support for builtin functions.
* ch-exp.y: Parse LOWER, UPPER, and LENGTH builtins.
(write_lower_upper_value): Convenience function for LOWER and UPPER.
(upper_lower_argument, length_argument): Removed non-terminals.
* ch-lang.c (chill_op_print_tab): Entries for UPPER, LOWER, LENGTH.
(type_lower_upper): New function. Calculate LOWER/UPPER of type.
(value_chill_length): New function. Calcalate LENGTH of ARRAY/STRING.
(evaluate_subexp_chill): Handle UNOP_LOWER, UNOP_UPPER, UNOP_LENGTH.
This fixes PR 5015 (and 5826 which is a duplicate).
* defs.h: Don't declare strchr and friends if WIN32.
(DIRNAME_SEPARATOR): Move here from source.c.
(SLASH_P, SLASH_CHAR, SLASH_STRING, ROOTED_P): New macros,
symbolic definitions for filename bits.
* top.c (cd_command): Use these.
* source.c (mod_path, openp): Ditto.
* terminal.h: Disable termio/sgtty definitions if WIN32.
* findvar.c (registers_changed): Call registers_changed_hook
if it is defined.
for `watchdog' variable. This allows the user to put an upper
limit on the amount of time that GDB will wait for the target to
return from a step or continue operation. This will primarily be
used for the testsuite, where it is difficult to come up with a
reasonable timeout for things like function calls, which can take
as long as three minutes under some circumstances. If the
watchdog timer expires, GDB will generate an error that looks like
`Watchdog has expired.', and will detach from the target.
* remote-mips.c (mips_open): Setup initial frame from target.
Print it out so that user is told where the program is stopped
when they attach.
* remote-nrom.c: Loads of cleanups. Use serial code to open
network connections. Use expect() to wait for response to
download command.
* ser-tcp.c (tcp_open): Retry connection if we get ECONNREFUSED.
* serial.c serial.h (serial_open serial_fdopen serial_close):
Allow users to open the same device multiple times. They all get
to share the same serial_t. This is about the only way to have
multiple active targets use the same device (for download and
debug).
* sparcl-tdep.c: Keep #include <unistd.h> away from GO32.
* target.c: Add `targetdebug' variable. If this is non-zero,
then a special target is put at the top of the target stack which
will cause all calls through the target vector to have their args
and results printed out.
