GDB currently doesn't build on 32-bit Solaris:
* On Solaris 11.4/x86:
In file included from /usr/include/sys/procfs.h:26,
from /vol/src/gnu/gdb/hg/master/dist/gdb/i386-sol2-nat.c:24:
/usr/include/sys/old_procfs.h:31:2: error: #error "Cannot use procfs in the large file compilation environment"
#error "Cannot use procfs in the large file compilation environment"
^~~~~
* On Solaris 11.3/x86 there are several more instances of this.
The interaction between procfs and large-file support historically has
been a royal mess on Solaris:
* There are two versions of the procfs interface:
** The old ioctl-based /proc, deprecated and not used any longer in
either gdb or binutils.
** The `new' (introduced in Solaris 2.6, 1997) structured /proc.
* There are two headers one can possibly include:
** <procfs.h> which only provides the structured /proc, definining
_STRUCTURED_PROC=1 and then including ...
** <sys/procfs.h> which defaults to _STRUCTURED_PROC=0, the ioctl-based
/proc, but provides structured /proc if _STRUCTURED_PROC == 1.
* procfs and the large-file environment didn't go well together:
** Until Solaris 11.3, <sys/procfs.h> would always #error in 32-bit
compilations when the large-file environment was active
(_FILE_OFFSET_BITS == 64).
** In both Solaris 11.4 and Illumos, this restriction was lifted for
structured /proc.
So one has to be careful always to define _STRUCTURED_PROC=1 when
testing for or using <sys/procfs.h> on Solaris. As the errors above
show, this isn't always the case in binutils-gdb right now.
Also one may need to disable large-file support for 32-bit compilations
on Solaris. config/largefile.m4 meant to do this by wrapping the
AC_SYS_LARGEFILE autoconf macro with appropriate checks, yielding
ACX_LARGEFILE. Unfortunately the macro doesn't always succeed because
it neglects the _STRUCTURED_PROC part.
To make things even worse, since GCC 9 g++ predefines
_FILE_OFFSET_BITS=64 on Solaris. So even if largefile.m4 deciced not to
enable large-file support, this has no effect, breaking the gdb build.
This patch addresses all this as follows:
* All tests for the <sys/procfs.h> header are made with
_STRUCTURED_PROC=1, the definition going into the various config.h
files instead of having to make them (and sometimes failing) in the
affected sources.
* To cope with the g++ predefine of _FILE_OFFSET_BITS=64,
-U_FILE_OFFSET_BITS is added to various *_CPPFLAGS variables. It had
been far easier to have just
#undef _FILE_OFFSET_BITS
in config.h, but unfortunately such a construct in config.in is
commented by config.status irrespective of indentation and whitespace
if large-file support is disabled. I found no way around this and
putting the #undef in several global headers for bfd, binutils, ld,
and gdb seemed way more invasive.
* Last, the applicability check in largefile.m4 was modified only to
disable largefile support if really needed. To do so, it checks if
<sys/procfs.h> compiles with _FILE_OFFSET_BITS=64 defined. If it
doesn't, the disabling only happens if gdb exists in-tree and isn't
disabled, otherwise (building binutils from a tarball), there's no
conflict.
What initially confused me was the check for $plugins here, which
originally caused the disabling not to take place. Since AC_PLUGINGS
does enable plugin support if <dlfcn.h> exists (which it does on
Solaris), the disabling never happened.
I could find no explanation why the linker plugin needs large-file
support but thought it would be enough if gld and GCC's lto-plugin
agreed on the _FILE_OFFSET_BITS value. Unfortunately, that's not
enough: lto-plugin uses the simple-object interface from libiberty,
which includes off_t arguments. So to fully disable large-file
support would mean also disabling it in libiberty and its users: gcc
and libstdc++-v3. This seems highly undesirable, so I decided to
disable the linker plugin instead if large-file support won't work.
The patch allows binutils+gdb to build on i386-pc-solaris2.11 (both
Solaris 11.3 and 11.4, using GCC 9.3.0 which is the worst case due to
predefined _FILE_OFFSET_BITS=64). Also regtested on
amd64-pc-solaris2.11 (again on Solaris 11.3 and 11.4),
x86_64-pc-linux-gnu and i686-pc-linux-gnu.
config:
* largefile.m4 (ACX_LARGEFILE) <sparc-*-solaris*|i?86-*-solaris*>:
Check for <sys/procfs.h> incompatilibity with large-file support
on Solaris.
Only disable large-file support and perhaps plugins if needed.
Set, substitute LARGEFILE_CPPFLAGS if so.
bfd:
* bfd.m4 (BFD_SYS_PROCFS_H): New macro.
(BFD_HAVE_SYS_PROCFS_TYPE): Require BFD_SYS_PROCFS_H.
Don't define _STRUCTURED_PROC.
(BFD_HAVE_SYS_PROCFS_TYPE_MEMBER): Likewise.
* elf.c [HAVE_SYS_PROCFS_H] (_STRUCTURED_PROC): Don't define.
* configure.ac: Use BFD_SYS_PROCFS_H to check for <sys/procfs.h>.
* configure, config.in: Regenerate.
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* Makefile.in, doc/Makefile.in: Regenerate.
binutils:
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* Makefile.in, doc/Makefile.in: Regenerate.
* configure: Regenerate.
gas:
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* Makefile.in, doc/Makefile.in: Regenerate.
* configure: Regenerate.
gdb:
* proc-api.c (_STRUCTURED_PROC): Don't define.
* proc-events.c: Likewise.
* proc-flags.c: Likewise.
* proc-why.c: Likewise.
* procfs.c: Likewise.
* Makefile.in (INTERNAL_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* configure, config.in: Regenerate.
gdbserver:
* configure, config.in: Regenerate.
gdbsupport:
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* common.m4 (GDB_AC_COMMON): Use BFD_SYS_PROCFS_H to check for
<sys/procfs.h>.
* Makefile.in: Regenerate.
* configure, config.in: Regenerate.
gnulib:
* configure.ac: Run ACX_LARGEFILE before gl_EARLY.
* configure: Regenerate.
gprof:
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* Makefile.in: Regenerate.
* configure: Regenerate.
ld:
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* Makefile.in: Regenerate.
* configure: Regenerate.
PR 25224
bfd * Makefile.am: Add z80-elf target support.
* configure.ac: Likewise.
* targets.c: Likewise.
* config.bfd: Add z80-elf target support and new arches: ez80 and z180.
* elf32-z80.c: New file.
* archures.c: Add new z80 architectures: eZ80 and Z180.
* coffcode.h: Likewise.
* cpu-z80.c: Likewise.
* bfd-in2.h: Likewise plus additional Z80 relocations.
* coff-z80.c: Add new relocations for Z80 target and local label check.
gas * config/tc-z80.c: Add new architectures: Z180 and eZ80. Add support
for assembler code generated by SDCC. Add new relocation types. Add
z80-elf target support.
* config/tc-z80.h: Add z80-elf target support. Enable dollar local
labels. Local labels starts from ".L".
* testsuite/gas/all/fwdexp.d: Fix failure due to symbol conflict.
* testsuite/gas/all/fwdexp.s: Likewise.
* testsuite/gas/z80/suffix.d: Fix failure on ELF target.
* testsuite/gas/z80/z80.exp: Add new tests
* testsuite/gas/z80/dollar.d: New file.
* testsuite/gas/z80/dollar.s: New file.
* testsuite/gas/z80/ez80_adl_all.d: New file.
* testsuite/gas/z80/ez80_adl_all.s: New file.
* testsuite/gas/z80/ez80_adl_suf.d: New file.
* testsuite/gas/z80/ez80_isuf.s: New file.
* testsuite/gas/z80/ez80_z80_all.d: New file.
* testsuite/gas/z80/ez80_z80_all.s: New file.
* testsuite/gas/z80/ez80_z80_suf.d: New file.
* testsuite/gas/z80/r800_extra.d: New file.
* testsuite/gas/z80/r800_extra.s: New file.
* testsuite/gas/z80/r800_ii8.d: New file.
* testsuite/gas/z80/r800_z80_doc.d: New file.
* testsuite/gas/z80/z180.d: New file.
* testsuite/gas/z80/z180.s: New file.
* testsuite/gas/z80/z180_z80_doc.d: New file.
* testsuite/gas/z80/z80_doc.d: New file.
* testsuite/gas/z80/z80_doc.s: New file.
* testsuite/gas/z80/z80_ii8.d: New file.
* testsuite/gas/z80/z80_ii8.s: New file.
* testsuite/gas/z80/z80_in_f_c.d: New file.
* testsuite/gas/z80/z80_in_f_c.s: New file.
* testsuite/gas/z80/z80_op_ii_ld.d: New file.
* testsuite/gas/z80/z80_op_ii_ld.s: New file.
* testsuite/gas/z80/z80_out_c_0.d: New file.
* testsuite/gas/z80/z80_out_c_0.s: New file.
* testsuite/gas/z80/z80_reloc.d: New file.
* testsuite/gas/z80/z80_reloc.s: New file.
* testsuite/gas/z80/z80_sli.d: New file.
* testsuite/gas/z80/z80_sli.s: New file.
ld * Makefile.am: Add new target z80-elf
* configure.tgt: Likewise.
* emultempl/z80.em: Add support for eZ80 and Z180 architectures.
* emulparams/elf32z80.sh: New file.
* emultempl/z80elf.em: Likewise.
* testsuite/ld-z80/arch_ez80_adl.d: Likewise.
* testsuite/ld-z80/arch_ez80_z80.d: Likewise.
* testsuite/ld-z80/arch_r800.d: Likewise.
* testsuite/ld-z80/arch_z180.d: Likewise.
* testsuite/ld-z80/arch_z80.d: Likewise.
* testsuite/ld-z80/comb_arch_ez80_z80.d: Likewise.
* testsuite/ld-z80/comb_arch_z180.d: Likewise.
* testsuite/ld-z80/labels.s: Likewise.
* testsuite/ld-z80/relocs.s: Likewise.
* testsuite/ld-z80/relocs_b_ez80.d: Likewise.
* testsuite/ld-z80/relocs_b_z80.d: Likewise.
* testsuite/ld-z80/relocs_f_z80.d: Likewise.
* testsuite/ld-z80/z80.exp: Likewise.
opcodes * z80-dis.c: Add support for eZ80 and Z80 instructions.
I get some spurious changes when running autoconf/automake for various
projects in the tree. This is likely because they were generated using
distro-patched tools last time.
I ran `autoreconf -f` in the various automake projects of the
binutils-gdb tree, and this is the result. The tools I am using have
been compiled from source, from the upstream release.
bfd/ChangeLog:
* Makefile.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
binutils/ChangeLog:
* Makefile.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
gas/ChangeLog:
* Makefile.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
gold/ChangeLog:
* testsuite/Makefile.in: Re-generate.
gprof/ChangeLog:
* Makefile.in: Re-generate.
* configure: Re-generate.
ld/ChangeLog:
* Makefile.in: Re-generate.
* configure: Re-generate.
opcodes/ChangeLog:
* Makefile.in: Re-generate.
* configure: Re-generate.
PR 24569
* gprof.c (usage): Restore alphabetical sorting to short options
list. Add -r, -R and -t short options to the list.
(main): Add comment about -g and -G possibly being deprecated.
* gprof.texi: Update usage example in line with changes above.
PR 24402
* symtab.c (symtab_finalize): Init prev_addr to one less than
first symbol address, not one more. Correct test for symbols
with leading underscores.
Binutils documentation uses a mix of spelling for the compound word
"command-line X". According to [1]:
"Sometimes compound words are written separately (nail polish),
sometimes with a hyphen (short-sighted) and sometimes as one word
(eyelashes). Often new compounds are written as two separate words and,
as they become more familiar, they are either connected with a hyphen
(-) or made into one word."
I think command-line X is common enough in our industry that the two
workds command and line should be connected. Since command-line is more
common than commandline, I propose to update binutils documentation to
consistently use "command-line" when this is used as an adjective to a
noun (eg. command-line argument, command-line switch, command-line
option and command-line flag). I've left occurences of "the command
line" as is. I've also left gdb, sim and readline alone and have only
touched public documentation (texi and NEWS files).
[1]
http://dictionary.cambridge.org/grammar/british-grammar/word-formation/compounds
2018-07-02 Thomas Preud'homme <thomas.preudhomme@arm.com>
bfd/
* doc/bfdint.texi: Use command-line consistently when used in a
compount word.
* doc/bfdsumm.texi: Likewise.
binutils/
* NEWS: Use command-line consistently when used in a compount word.
* doc/binutils.texi: Likewise and fix trailing whitespace on same
line.
gas/
* NEWS: Use command-line consistently when used in a compount word.
* doc/as.texi: Likewise.
* doc/c-aarch64.texi: Likewise.
* doc/c-alpha.texi: Likewise.
* doc/c-arc.texi: Likewise.
* doc/c-arm.texi: Likewise.
* doc/c-avr.texi: Likewise.
* doc/c-bfin.texi: Likewise.
* doc/c-cris.texi: Likewise.
* doc/c-epiphany.texi: Likewise.
* doc/c-i386.texi: Likewise.
* doc/c-ia64.texi: Likewise.
* doc/c-lm32.texi: Likewise.
* doc/c-m32r.texi: Likewise.
* doc/c-m68k.texi: Likewise.
* doc/c-mips.texi: Likewise.
* doc/c-mmix.texi: Likewise.
* doc/c-msp430.texi: Likewise.
* doc/c-mt.texi: Likewise.
* doc/c-nios2.texi: Likewise.
* doc/c-ppc.texi: Likewise.
* doc/c-pru.texi: Likewise.
* doc/c-rl78.texi: Likewise.
* doc/c-rx.texi: Likewise.
* doc/c-tic6x.texi: Likewise.
* doc/c-v850.texi: Likewise.
* doc/c-vax.texi: Likewise.
* doc/c-visium.texi: Likewise.
* doc/c-xstormy16.texi: Likewise.
* doc/c-xtensa.texi: Likewise.
* doc/c-z80.texi: Likewise.
* doc/c-z8k.texi: Likewise.
* doc/internals.texi: Likewise.
gprof/
* gprof.texi: Use command-line consistently when used in a compount
word.
ld/
* NEWS: Use command-line consistently when used in a compount word.
* ld.texinfo: Likewise.
* ldint.texinfo: Likewise.
When trying to run the update-gnulib.sh script in gdb, I get this:
Error: Wrong automake version (Unescaped left brace in regex is deprecated, passed through in regex; marked by <-- HERE in m/\${ <-- HERE ([^ =:+{}]+)}/ at /opt/automake/1.11.1/bin/automake line 4113.), we need 1.11.1.
Aborting.
Apparently, it's an issue with a regex in automake that triggers a
warning starting with Perl 5.22. It has been fixed in automake 1.15.1.
So I think it's a good excuse to bump the versions of autoconf and
automake used in the gnulib import. And to avoid requiring multiple
builds of autoconf/automake, it was suggested that we bump the required
version of those tools for all binutils-gdb.
For autoconf, the 2.69 version is universally available, so it's an easy
choice. For automake, different distros and distro versions have
different automake versions. But 1.15.1 seems to be the most readily
available as a package. In any case, it's easy to build it from source.
I removed the version checks from AUTOMAKE_OPTIONS and AC_PREREQ,
because I don't think they are useful in our case. They only specify a
lower bound for the acceptable version of automake/autoconf. That's
useful if you let the user choose the version of the tool they want to
use, but want to set a minimum version (because you use a feature that
was introduced in that version). In our case, we force people to use a
specific version anyway. For the autoconf version, we have the check in
config/override.m4 that enforces the version we want. It will be one
less thing to update next time we change autotools version.
I hit a few categories of problems that required some changes. They are
described below along with the chosen solutions.
Problem 1:
configure.ac:17: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see:
configure.ac:17: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation
Solution 1:
Adjust the code based on the example at that URL.
Problem 2 (in zlib/):
Makefile.am: error: required file './INSTALL' not found
Makefile.am: 'automake --add-missing' can install 'INSTALL'
Makefile.am: error: required file './NEWS' not found
Makefile.am: error: required file './AUTHORS' not found
Makefile.am: error: required file './COPYING' not found
Makefile.am: 'automake --add-missing' can install 'COPYING'
Solution 2:
Add the foreign option to AUTOMAKE_OPTIONS.
Problem 3:
doc/Makefile.am:20: error: support for Cygnus-style trees has been removed
Solution 3:
Remove the cygnus options.
Problem 4:
Makefile.am:656: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS')
Solution 4:
Rename "INCLUDES = " to "AM_CPPFLAGS += " (because AM_CPPFLAGS is
already defined earlier).
Problem 5:
doc/Makefile.am:71: warning: suffix '.texinfo' for Texinfo files is discouraged; use '.texi' instead
doc/Makefile.am: warning: Oops!
doc/Makefile.am: It appears this file (or files included by it) are triggering
doc/Makefile.am: an undocumented, soon-to-be-removed automake hack.
doc/Makefile.am: Future automake versions will no longer place in the builddir
doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that
doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or
doc/Makefile.am: DISTCLEANFILES.
doc/Makefile.am: If you want your '.info' files to be placed in the builddir
doc/Makefile.am: rather than in the srcdir, you have to use the shiny new
doc/Makefile.am: 'info-in-builddir' automake option.
Solution 5:
Rename .texinfo files to .texi.
Problem 6:
doc/Makefile.am: warning: Oops!
doc/Makefile.am: It appears this file (or files included by it) are triggering
doc/Makefile.am: an undocumented, soon-to-be-removed automake hack.
doc/Makefile.am: Future automake versions will no longer place in the builddir
doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that
doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or
doc/Makefile.am: DISTCLEANFILES.
doc/Makefile.am: If you want your '.info' files to be placed in the builddir
doc/Makefile.am: rather than in the srcdir, you have to use the shiny new
doc/Makefile.am: 'info-in-builddir' automake option.
Solution 6:
Remove the hack at the bottom of doc/Makefile.am and use
the info-in-builddir automake option.
Problem 7:
doc/Makefile.am:35: error: required file '../texinfo.tex' not found
doc/Makefile.am:35: 'automake --add-missing' can install 'texinfo.tex'
Solution 7:
Use the no-texinfo.tex automake option. We also have one in
texinfo/texinfo.tex, not sure if we should point to that, or move it
(or a newer version of it added with automake --add-missing) to
top-level.
Problem 8:
Makefile.am:131: warning: source file 'config/tc-aarch64.c' is in a subdirectory,
Makefile.am:131: but option 'subdir-objects' is disabled
automake: warning: possible forward-incompatibility.
automake: At least a source file is in a subdirectory, but the 'subdir-objects'
automake: automake option hasn't been enabled. For now, the corresponding output
automake: object file(s) will be placed in the top-level directory. However,
automake: this behaviour will change in future Automake versions: they will
automake: unconditionally cause object files to be placed in the same subdirectory
automake: of the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
Solution 8:
Use subdir-objects, that means adjusting references to some .o that will now
be in config/.
Problem 9:
configure.ac:375: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body
../../lib/autoconf/lang.m4:193: AC_LANG_CONFTEST is expanded from...
../../lib/autoconf/general.m4:2601: _AC_COMPILE_IFELSE is expanded from...
../../lib/autoconf/general.m4:2617: AC_COMPILE_IFELSE is expanded from...
../../lib/m4sugar/m4sh.m4:639: AS_IF is expanded from...
../../lib/autoconf/general.m4:2042: AC_CACHE_VAL is expanded from...
../../lib/autoconf/general.m4:2063: AC_CACHE_CHECK is expanded from...
configure.ac:375: the top level
Solution 9:
Use AC_LANG_SOURCE, or use proper quoting.
Problem 10 (in intl/):
configure.ac:7: warning: AC_COMPILE_IFELSE was called before AC_USE_SYSTEM_EXTENSIONS
/usr/share/aclocal/threadlib.m4:36: gl_THREADLIB_EARLY_BODY is expanded from...
/usr/share/aclocal/threadlib.m4:29: gl_THREADLIB_EARLY is expanded from...
/usr/share/aclocal/threadlib.m4:318: gl_THREADLIB is expanded from...
/usr/share/aclocal/lock.m4:9: gl_LOCK is expanded from...
/usr/share/aclocal/intl.m4:211: gt_INTL_SUBDIR_CORE is expanded from...
/usr/share/aclocal/intl.m4:25: AM_INTL_SUBDIR is expanded from...
/usr/share/aclocal/gettext.m4:57: AM_GNU_GETTEXT is expanded from...
configure.ac:7: the top level
Solution 10:
Add AC_USE_SYSTEM_EXTENSIONS in configure.ac.
ChangeLog:
* libtool.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE.
* README-maintainer-mode: Update version requirements.
* ar-lib: New file.
* test-driver: New file.
* configure: Re-generate.
bfd/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11.
(INCLUDES): Rename to ...
(AM_CPPFLAGS): ... this.
* configure.ac: Remove AC_PREREQ.
* doc/Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9, cygnus, add
info-in-builddir no-texinfo.tex.
(info_TEXINFOS): Rename bfd.texinfo to bfd.texi.
* doc/bfd.texinfo: Rename to ...
* doc/bfd.texi: ... this.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
binutils/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* doc/Makefile.am (AUTOMAKE_OPTIONS): Remove cygnus, add
info-in-builddir no-texinfo.tex.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
config/ChangeLog:
* override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69.
etc/ChangeLog:
* configure.in: Remove AC_PREREQ.
* configure: Re-generate.
gas/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11, add subdir-objects.
(TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O): Add config/ prefix.
* configure.ac (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O, emfiles,
extra_objects): Add config/ prefix.
* doc/as.texinfo: Rename to...
* doc/as.texi: ... this.
* doc/Makefile.am: Rename as.texinfo to as.texi throughout.
Remove DISTCLEANFILES hack.
(AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add no-texinfo.tex and
info-in-builddir.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
gdb/ChangeLog:
* common/common-defs.h (PACKAGE_NAME, PACKAGE_VERSION,
PACKAGE_STRING, PACKAGE_TARNAME): Undefine.
* configure.ac: Remove AC_PREREQ, add missing quoting.
* gnulib/configure.ac: Modernize usage of
AC_INIT/AM_INIT_AUTOMAKE. Remove AC_PREREQ.
* gnulib/update-gnulib.sh (AUTOCONF_VERSION): Bump to 2.69.
(AUTOMAKE_VERSION): Bump to 1.15.1.
* configure: Re-generate.
* config.in: Re-generate.
* aclocal.m4: Re-generate.
* gnulib/aclocal.m4: Re-generate.
* gnulib/config.in: Re-generate.
* gnulib/configure: Re-generate.
* gnulib/import/Makefile.in: Re-generate.
gdb/gdbserver/ChangeLog:
* configure.ac: Remove AC_PREREQ, add missing quoting.
* configure: Re-generate.
* config.in: Re-generate.
* aclocal.m4: Re-generate.
gdb/testsuite/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
gold/ChangeLog:
* configure.ac: Remove AC_PREREQ, add missing quoting and usage
of AC_LANG_SOURCE.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
* testsuite/Makefile.in: Re-generate.
gprof/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* Makefile.am: Remove DISTCLEANFILES hack.
(AUTOMAKE_OPTIONS): Remove 1.11, add info-in-builddir.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
* gconfig.in: Re-generate.
intl/ChangeLog:
* configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ.
* configure: Re-generate.
* config.h.in: Re-generate.
* aclocal.m4: Re-generate.
ld/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* Makefile.am: Remove DISTCLEANFILES hack, rename ld.texinfo to
ld.texi, ldint.texinfo to ldint.texi throughout.
(AUTOMAKE_OPTIONS): Add info-in-builddir.
* README: Rename ld.texinfo to ld.texi, ldint.texinfo to
ldint.texi throughout.
* gen-doc.texi: Likewise.
* h8-doc.texi: Likewise.
* ld.texinfo: Rename to ...
* ld.texi: ... this.
* ldint.texinfo: Rename to ...
* ldint.texi: ... this.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
libdecnumber/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* aclocal.m4.
libiberty/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* config.in: Re-generate.
opcodes/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11.
* configure.ac: Remove AC_PREREQ.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
readline/ChangeLog.gdb:
* configure: Re-generate.
* examples/rlfe/configure: Re-generate.
sim/ChangeLog:
* All configure.ac: Remove AC_PREREQ.
* All configure: Re-generate.
zlib/ChangeLog.bin-gdb:
* configure.ac: Modernize AC_INIT call, remove AC_PREREQ.
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add
foreign.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
Bump version number to 2.30.52 since _bfd_link_hide_symbol has been added
to bfd_target.
bfd/
* version.m4: Bump version to 2.30.52
* configure: Regenerated.
binutils/
* configure: Regenerated.
gas/
* configure: Regenerated.
gprof/
* configure: Regenerated.
ld/
* configure: Regenerated.
opcodes/
* configure: Regenerated.
