(md_begin, md_parse_option): Handle 5400 options/names.
(macro_build, mips_ip): Check for 5400-specific instructions.
(md_longopts, OPTION_M5400, OPTION_NO_M5400): More command-line support for
5400.
* config/tc-mips.c (validate_mips_insn): New function, checks match versus mask
bits, and also verifies that all bits to be output are actually specified
somewhere.
(md_begin): Call it for 32-bit instructions, instead of doing match/mask check
here. In case of failure, print a message, but check the rest of the opcode
table before exiting.
* acinclude.m4: New file, from old aclocal.m4.
* configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL. Remove
shared library handling; now handled by libtool. Replace
AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AC_PROG_YACC,
AC_PROG_LEX, and AC_DECL_YYTEXT. Call AM_MAINTAINER_MODE,
AM_CYGWIN32, and AM_EXEEXT. Don't call CY_CYGWIN32 or CY_EXEEXT.
* config.in: New file, created by autoheader.
* conf.in: Remove.
* acconfig.h: Mention PACKAGE, VERSION, and USING_CGEN.
* stamp-h.in: New file.
* as.c (print_version_id): Change GAS_VERSION to VERSION.
(parse_args): Likewise.
* config/obj-vms.c: (Write_VMS_MHD_Records): Likewise.
* Makefile.in: Now built with automake.
* aclocal.m4: Now built with aclocal.
* configure: Rebuild.
instruction registers, opcodes and formats. Build internal table
for new instructions and provide callbacks for assembler and
disassembler.
* itbl-lex.l, itbl-parse.y: Lex and yacc parsers for instruction
spec table.
* itbl-ops.h: New file. Header file for itbl support.
* config/itbl-mips.h: New file. Mips specific definitions for
itbl support.
includes config.h instead of host.h, tc.h instead of tp.h, and
targ-env.h instead of target-environment.h.
Also, obj-format.h includes targ-cpu.h instead of
target-processor.h.
start-sanitize-tic80
(Laying groundwork, that will be incrementally fleshed out,
for TIc80 support)
* configure.in (case ${generic_target}): Add tic80-*-coff entry.
* configure: Rebuild with autoconf.
* config/obj-coff.h (coff/tic80.h): Include if TC_TIC80 defined.
(TARGET_FORMAT): Define to "coff-tic80".
* config/tc-tic80.c: New file for TIc80 support.
* config/tc-tic80.h: New file for TIc80 support.
end-sanitize-tic80
Add support for openVMS/Alpha.
* as.h (PRINTF_LIKE): Don't define if VMS, for now.
* config/obj-evax.c: New file.
* config/obj-evax.h: New file.
* config/tc-alpha.c: Add support for EVAX format if OBJ_EVAX is
defined.
* config/tc-alpha.h: Add support for EVAX format if OBJ_EVAX is
defined. Add case for bfd_target_evax_flavour.
* config/vms-a-conf.h: New file.
* conf-a-gas.com: New file.
* configure.in: Add target alpha-*-*vms*.
* configure: Rebuild.
* makefile.vms: New file.
* read.c (s_lcomm): Align bss_seg on 8 byte boundary if OBJ_EVAX.
Don't call ffs on openVMS/Alpha.
Wed Jul 17 14:25:13 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* config/tc-d10v.c: New file.
* config/tc-d10v.h: New file.
* configure (d10v-*-elf): New target.
* configure.in (d10v-*-elf): New target.
end-sanitize-d10v
(build_bytes): Likewise.
(skip_colonthing): Handle :32 suffix.
(get_specific): Promote L_24 to L_32 if it makes a match.
Don't always promote L_8 to L_16.
(do_a_fix_imm): Clean up L_32 and L_24 handling.
H8/S related stuff that doesn't need to be sanitized.
start-sanitize-h8s
* config/tc-h8300.c (Smode): New variable.
(h8300hmode): Turn off Hmode.
(h8300smode): New function. Turn on Smode and Hmode.
(md_pseudo_table): New ".h8300s" pseudo-op.
(parse_reg): Handle "exr" register.
(get_operand): Handle bizarre syntax for "stm.l" and "ldm.l".
Handle "mach" and "machl" operands for ldmac.
(get_specific): Handle "stm.l" and "ldm.l".
(build_bytes): Handle "stm.l" and "ldm.l"; handle MACREG operands.
* config/tc-h8300.h (COFF_MAGIC): Handle H8/S magic number.
(Smode): Declare.
end-sanitize-h8s
Sanitized H8/S stuff until we know its status.
* as.c: Include sb.h and macro.h.
(max_macro_next): New global variable.
(main): Call macro_init.
(macro_expr): New static function.
* as.h (max_macro_nest): Declare.
* read.c (line_label): Rename from mri_line_label. Change all
uses.
(potable): Add exitm, irp, irpc, macro, mexit, rept.
(read_a_source_file): Always clear line_label at the start of a
line, not just when flag_mri or LABELS_WITHOUT_COLONS. Fixup
MRI/LABELS_WITHOUT_COLONS handling. In MRI mode, permit label:
equ val. Set line_label when calling colon. In MRI mode, a
leading '.' does not imply a pseudo-op. Check for macro expansion
before calling md_assemble.
(s_irp): New function.
(get_line_sb): New static function.
(s_macro): New function.
(s_mexit): New function.
(s_rept): New function.
* read.h (line_label): Rename from mri_line_label.
(s_irp, s_rept): Declare.
(s_macro, s_mexit): Declare.
* input-scrub.c: Include sb.h.
(sb_index, from_sb): New static variables.
(macro_nest): New static variable.
(struct input_save): Add sb_index and from_sb fields. Change
next_saved_file field to be struct input_save *.
(next_saved_file): Changed to be struct input_save *.
(input_scrub_push): Change to return type struct input_save *.
Save sb_index and from_sb.
(input_scrub_pop): Change parameter type to struct input_save *.
Restore sb_index and from_sb.
(input_scrub_include_sb): New function.
(input_scrub_next_buffer): Handle reading from from_sb.
(bump_line_counters): Only increment lines if not using from_sb.
* config/tc-m68k.c (opt_table): Add nest.
(opt_nest): New static function.
* gasp.c: Include sb.h and macro.h. Move all sb related functions
and definitions to sb.h and sb.c. Move all macro related
functions and definitions to macro.h and macro.c.
* sb.h, sb.c: New files, extracted from gasp.c.
* macro.h, macro.c: Likewise.
* Makefile.in (OBJS): Add sb.o and macro.o
(GASPOBJS): Define.
(gasp.new): Depend upon $(GASPOBJS). Use $(GASPOBJS) to link.
(TARG_CPU_DEP_m68k): Depend upon subsegs.h.
(gasp.o): Depend upon sb.h and macro.h.
(sb.o): New target.
(macro.o): New target.
(as.o): Depend upon sb.h and macro.h.
(input-scrub.o): Depend upon sb.h.
(read.o): Depend upon sb.h and macro.h.
