As an extension, GCC allows void pointer arithmetic, with sizeof(void)
and alignof(void) both 1. GDB supports this extension, but clang does
not, and fails to compile the generated output of gdb.cp/align.exp
with the following error:
gdb compile failed, /gdbtest/build/gdb/testsuite/outputs/gdb.cp/align/align.cc:28:23:
error: invalid application of 'alignof' to an incomplete type 'void'
unsigned a_void = alignof (void);
^ ~~~~~~
1 error generated.
This commit adds preprocessor conditionals to the generated output, to
omit the unsupported code when using clang, and supplies the expected
value so the test can complete.
gdb/testsuite/ChangeLog:
* gdb.cp/align.exp: Fix "alignof (void)" tests when compiling
with clang.
bfd/
* elflink.c (_bfd_elf_gc_keep): Use bfd_is_const_section.
ld/
PR 26265
* ldlang.c (undef_from_cmdline): Delete.
(ldlang_add_undef): Mark "cmdline" param unused.
(lang_end): Traverse gc_sym_list to determine whether a symbol root
has been specified. Update error message.
* testsuite/ld-gc/noent.d: Adjust for changed error message.
In openmp test-case gdb.threads/omp-par-scope.exp we xfail and kfail dependent
on omp_get_thread_num (). Since execution order of the threads can vary from
execution to execution, this can cause changes in test results.
F.i., we can see this difference between two test runs:
...
-KFAIL: single_scope: first thread: print i3 (PRMS: gdb/22214)
+PASS: single_scope: first thread: print i3
-PASS: single_scope: second thread: print i3
+KFAIL: single_scope: second thread: print i3 (PRMS: gdb/22214)
...
In both cases, the KFAIL is for omp_get_thread_num () == 1, but in one case
that corresponds to the first thread executing that bit of code, and in the
other case to the second thread.
Get rid of this difference by stabilizing execution order.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-07-20 Tom de Vries <tdevries@suse.de>
* gdb.threads/omp-par-scope.c (lock, lock2): New variable.
(omp_set_lock_in_order): New function.
(single_scope, multi_scope, nested_func, nested_parallel): Use
omp_set_lock_in_order and omp_unset_lock.
(main): Init and destroy lock and lock2.
Update and run PR gas/26263 linker tests for all x86 ELF targets to
accept any program header layout.
PR gas/26263
* testsuite/ld-i386/pr26263.d: Updated.
* testsuite/ld-x86-64/pr26263.d: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run gas/26263 test for all ELF
targets.
When running test-case gdb.base/valgrind-infcall-2.exp on a system without
libc debug info installed, I run into:
...
(gdb) p printf ("bla")^M
'printf' has unknown return type; cast the call to its declared return type^M
(gdb) FAIL: gdb.base/valgrind-infcall-2.exp: do printf
...
Fix this by casting the result of the printf call to int.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-07-20 Tom de Vries <tdevries@suse.de>
* gdb.base/valgrind-infcall-2.exp: Handle printf unknown return type.
When building gdb using CFLAGS/CXXFLAGS+=-fsanitizer=address and
LDFLAGS+=-lasan, and running test-case gdb.threads/attach-slow-waitpid.exp,
we get:
...
spawn gdb -nw -nx -data-directory data-directory^M
==16079==ASan runtime does not come first in initial library list; \
you should either link runtime to your application or manually preload \
it with LD_PRELOAD.^M
ERROR: (eof) GDB never initialized.
ERROR: : spawn id exp10 not open
while executing
"expect {
-i exp10 -timeout 120
-re "Kill the program being debugged. .y or n. $" {
send_gdb "y\n" answer
verbose "\t\tKilling previous pro..."
("uplevel" body line 1)
invoked from within
"uplevel $body" NONE : spawn id exp10 not open
WARNING: remote_expect statement without a default case
ERROR: : spawn id exp10 not open
while executing
"expect {
-i exp10 -timeout 120
-re "Reading symbols from.*LZMA support was disabled.*$gdb_prompt $" {
verbose "\t\tLoaded $arg into $GDB; .gnu_..."
("uplevel" body line 1)
invoked from within
"uplevel $body" NONE : spawn id exp10 not open
ERROR: Couldn't load attach-slow-waitpid into GDB (eof).
ERROR: Couldn't send attach 16070 to GDB.
UNRESOLVED: gdb.threads/attach-slow-waitpid.exp: attach to target
...
Bail out at the first ERROR, such that we have instead:
...
ERROR: (eof) GDB never initialized.
UNTESTED: gdb.threads/attach-slow-waitpid.exp: \
Couldn't start GDB with preloaded lib
...
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-07-20 Tom de Vries <tdevries@suse.de>
* gdb.threads/attach-slow-waitpid.exp: Bail out if gdb_start fails.
PR gas/4572
When / is a comment character, its use as binary "divide" operator needs
escaping by a backslash. Besides the scrubber needing to support this
(addressed in an earlier change), there are also a few provisions needed
in target specific operator handling.
As the spec calls for % and * to also be escaped because of being
"overloaded", also recognize these, despite the overloading there not
really preventing their use as operators in most (%) or all (*) cases,
given the way how the rest of the assembler works.
To bring source and testsuite in line, also drop the TE_I386AIX part of
the respective conditional, as i?86-*-aix* support had been removed a
while ago.
PR gas/4572
Generalize what ab1fadc6b2 ("PR22714, Assembler preprocessor loses
track of \@") did to always honor escaped comment chars. Use this then
to support escaped /, %, and * operators on x86, when / is a comment
char (to match the Sun assembler's behavior).
Various provisions exist for insns to be placed in the absolute section,
yet actually trying to do so didn't work. While data emission (of non-
zero values) is not allowed by generic code, I think this functionality
is useful for the programmer to be able to determine the size of insns.
Therefore, rather than turning the silnet failure into a verbose one,
make things mostly work; the one class of insns not supported (yet) are
branches (JMP and Jcc) with dynamically determined displacement widths.
In this one case, an error now gets reported instead of silently
ignoring the code.
Also avoid recording ISA / feature usage for insns emitted to the
absolute section.
So, here's my suggestion for making _init .. __etext cover .text +
.rodata (including things like the read-only exception tables) for
elf64mmix. A quick web search gives that __etext (and friends) isn't
well defined, so each target can interpret the "end of text segment"
to their own liking. It seems likely this change is also a better fit
than the default for other ports, at least those with .rodata after
.text in the same segment.
The presence of a separate rodata-segment is optional (and not true
for elf64mmix). This is reflected in the name as SEPARATE_TEXT /
SEPARATE_CODE isn't considered, to keep it simple; each target has to
make sure their settings of variables make sense.
ld:
* scripttempl/elf.sc (ETEXT_LAST_IN_RODATA_SEGMENT): New variable.
* emulparams/elf64mmix.sh (ETEXT_LAST_IN_RODATA_SEGMENT): Define.
* testsuite/ld-mmix/sec-1.d: Adjust.
This patch better supports mixing of power10 and non-power10 code,
as might be seen in a cpu-optimized library using ifuncs to select
functions optimized for a given cpu. Using -Wl,--no-power10-stubs
isn't that good in this situation since non-power10 notoc stubs are
slower and larger than the power10 variants, which you'd like to use
on power10 code paths.
With this change, power10 pc-relative code that makes calls marked
@notoc uses power10 stubs if stubs are necessary, and other calls use
non-power10 instructions in stubs. This will mean that if gcc is
generating code for -mcpu=power10 but with pc-rel disabled then you'll
get the older stubs even on power10 (unless you force with
-Wl,--power10-stubs). That shouldn't be too big a problem: stubs that
use r2 are reasonable. It's just the ones that set up addressing
using "mflr 12; bcl 20,31,.+4; mflr 11; mtlr 12" that should be
avoided if possible.
bfd/
* elf64-ppc.c (struct ppc_link_hash_table): Add has_power10_relocs.
(select_alt_stub): New function.
(ppc_get_stub_entry): Use it here.
(ppc64_elf_check_relocs): Set had_power10_relocs rather than
power10_stubs.
(ppc64_elf_size_stubs): Clear power10_stubs here instead. Don't
merge notoc stubs with other varieties when power10_stubs is "auto".
Instead dup the stub hash table entry.
(plt_stub_size, ppc_build_one_stub, ppc_size_one_stub): Adjust
tests of power10_stubs.
ld/
* emultempl/ppc64elf.em (power10-stubs): Accept optional "auto" arg.
* ld.texi (power10-stubs): Update.
* testsuite/ld-powerpc/callstub-1.d: Force --power10-stubs.
* testsuite/ld-powerpc/callstub-2.d: Relax branch offset comparison.
* testsuite/ld-powerpc/callstub-4.d: New test.
* testsuite/ld-powerpc/notoc.d: Force --no-power10-stubs.
* testsuite/ld-powerpc/notoc3.d,
* testsuite/ld-powerpc/notoc3.s,
* testsuite/ld-powerpc/notoc3.wf: New test.
* testsuite/ld-powerpc/powerpc.exp: Run new tests. Pass
--no-power10-stubs for notoc link.
The "linux_multi_process" is initialized but never modified. I
discussed this with Pedro on irc, and he said that, while it was
useful when developing this feature, it is now no longer needed. So,
this removes it.
gdb/ChangeLog
2020-07-18 Tom Tromey <tom@tromey.com>
* linux-nat.c (linux_multi_process): Remove.
(linux_nat_target::supports_multi_process): Return true.
It was pointed out on IRC that the RISC-V target allocates target
descriptions and stores them in a global map, and doesn't delete these
target descriptions when GDB shuts down.
This isn't a particular problem, the total number of target
descriptions we can create is very limited so creating these on demand
and holding them for the entire run on GDB seems reasonable.
However, not deleting these objects on GDB exit means extra warnings
are printed from tools like valgrind, and the address sanitiser,
making it harder to spot real issues. As it's reasonably easy to have
GDB correctly delete these objects on exit, lets just do that.
I started by noticing that we already have a target_desc_up type, a
wrapper around unique_ptr that calls a function that will correctly
delete target descriptions, so I want to use that, but....
...that type is declared in gdb/target-descriptions.h. If I try to
include that file in gdb/arch/riscv.c I run into a problem, that file
is compiled into both GDB and GDBServer.
OK, I could guard the include with #ifdef, but surely we can do
better.
So then I decided to move the target_desc_up type into
gdbsupport/tdesc.h, this is the interface file for generic code shared
between GDB and GDBserver (relating to target descriptions). The
actual implementation for the delete function still lives in
gdb/target-description.c, but now gdb/arch/riscv.c can see the
declaration. Problem solved....
... but, though RISC-V doesn't use it I've now exposed the
target_desc_up type to gdbserver, so in future someone _might_ start
using it, which is fine, except right now there's no definition of the
delete function - remember the delete I used is only defined in GDB
code.
No problem, I add an implementation of the delete operator into
gdbserver/tdesc.cc, and all is good..... except....
I start getting this error from GCC:
tdesc.cc:109:10: error: deleting object of polymorphic class type ‘target_desc’ which has non-virtual destructor might cause undefined behavior [-Werror=delete-non-virtual-dtor]
Which is caused because gdbserver's target_desc type inherits from
tdesc_element which has a virtual method, and so GCC worries that
target_desc might be used as a base class.
The solution is to declare gdbserver's target_desc class as final.
This is fine so long as we never intent to inherit from
target_desc (in gdbserver). But if we did then we'd want to make
target_desc's destructor virtual anyway, so the error above would be
resolved, and there wouldn't be an issue.
gdb/ChangeLog:
* arch/riscv.c (riscv_tdesc_cache): Change map type.
(riscv_lookup_target_description): Return pointer out of
unique_ptr.
* target-descriptions.c (allocate_target_description): Add
comment.
(target_desc_deleter::operator()): Likewise.
* target-descriptions.h (struct target_desc_deleter): Moved to
gdbsupport/tdesc.h.
(target_desc_up): Likewise.
gdbserver/ChangeLog:
* tdesc.cc (allocate_target_description): Add header comment.
(target_desc_deleter::operator()): New function.
* tdesc.h (struct target_desc): Declare as final.
gdbsupport/ChangeLog:
* tdesc.h (struct target_desc_deleter): Moved here
from gdb/target-descriptions.h, extend comment.
(target_desc_up): Likewise.
In commit ee3c5f8968 "Fix GDB crash when registers cannot be modified", we
fix a GDB crash:
...
$ valgrind /usr/bin/sleep 10000
==31595== Memcheck, a memory error detector
==31595== Command: /usr/bin/sleep 10000
==31595==
$ gdb /usr/bin/sleep
(gdb) target remote | vgdb --pid=31595
Remote debugging using | vgdb --pid=31595
...
$hex in __GI___nanosleep () at nanosleep.c:27
27 return SYSCALL_CANCEL (nanosleep, requested_time, remaining);
(gdb) p printf ("bla")
terminate called after throwing an instance of 'gdb_exception_error'
Aborted (core dumped)
...
This patch adds a test-case for it.
Unfortunately, I was not able to trigger the error condition using a regular
vgdb_start, so I've added a parameter active_at_startup, and when set to 0
this causes valgrind to be started without --vgdb-error=0.
Tested on x86_64-linux.
Tested with the commit mentioned above reverted, resulting in:
...
(gdb) p printf ("bla")^M
terminate called after throwing an instance of 'gdb_exception_error'^M
ERROR: GDB process no longer exists
GDB process exited with wait status 6152 exp10 0 0 CHILDKILLED SIGABRT SIGABRT
UNRESOLVED: gdb.base/valgrind-infcall-2.exp: do printf
...
gdb/testsuite/ChangeLog:
2020-07-17 Tom de Vries <tdevries@suse.de>
* gdb.base/valgrind-infcall-2.c: New test.
* gdb.base/valgrind-infcall-2.exp: New file.
* lib/valgrind.exp (vgdb_start): Add and handle active_at_startup.
I noticed a couple of spots in linux-nat.c that use 0/1 where boolean
literals would be more idiomatic. This patch makes this change.
gdb/ChangeLog
2020-07-17 Tom Tromey <tromey@adacore.com>
* linux-nat.c (linux_nat_target::supports_non_stop)
(linux_nat_target::always_non_stop_p): Use "true".
(linux_nat_target::supports_disable_randomization): Use "true" and
"false".
The dwarf assembly procs MACRO_AT_func and MACRO_AT_range have a src
parameter, which is set to $srcdir/$subdir/$srcfile in every single call.
Drop the src parameter and hardcode usage of $srcdir/$subdir/$srcfile in the
procs.
Build and reg-tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-07-17 Tom de Vries <tdevries@suse.de>
* lib/dwarf.exp (Dwarf::MACRO_AT_func, Dwarf::MACRO_AT_range): Drop
src parameter.
* gdb.dlang/watch-loc.exp: Update MACRO_AT_{func,range} calls.
* gdb.dwarf2/bitfield-parent-optimized-out.exp: Same.
* gdb.dwarf2/dw2-ifort-parameter.exp: Same.
* gdb.dwarf2/dw2-opt-structptr.exp: Same.
* gdb.dwarf2/dwz.exp: Same.
* gdb.dwarf2/implptr-optimized-out.exp: Same.
* gdb.dwarf2/implref-array.exp: Same.
* gdb.dwarf2/implref-const.exp: Same.
* gdb.dwarf2/implref-global.exp: Same.
* gdb.dwarf2/implref-struct.exp: Same.
* gdb.dwarf2/info-locals-optimized-out.exp: Same.
* gdb.dwarf2/opaque-type-lookup.exp: Same.
* gdb.dwarf2/var-access.exp: Same.
* gdb.dwarf2/varval.exp: Same.
* gdb.trace/entry-values.exp: Same.
The file lib/dwarf.exp contains:
...
# Declare a global label. This is typically used to refer to
# labels defined in other files, for example a function defined in
# a .c file.
proc extern {args} {
foreach name $args {
_op .global $name
}
}
...
The assembler directive to refer to labels defined in other files is
not .global, but .extern, and that one is ignored by gas.
Since we require gas for all dwarf assembly test-cases, remove the proc and
all it's uses.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-07-17 Tom de Vries <tdevries@suse.de>
* lib/dwarf.exp (Dwarf::extern): Remove.
* gdb.compile/compile-ops.exp: Remove use of Dwarf::extern.
* gdb.dlang/circular.exp: Same.
* gdb.dwarf2/comp-unit-lang.exp: Same.
* gdb.dwarf2/dw2-ifort-parameter.exp: Same.
* gdb.dwarf2/dw2-symtab-includes.exp: Same.
* gdb.dwarf2/dwz.exp: Same.
* gdb.dwarf2/imported-unit-abstract-const-value.exp: Same.
* gdb.dwarf2/imported-unit-runto-main.exp: Same.
* gdb.dwarf2/imported-unit.exp: Same.
* gdb.dwarf2/opaque-type-lookup.exp: Same.
This both makes the section layout more similar to that of the general
default for ELF and fixes (makes true) an assumption that code and
rodata is located between _init and __etext, in
libgcc/config/mmix/crti.S. Sadly, that's not actually true for ELF
(generally and for elf64mmix), where exception-tables and .rodata is
after _etext; I'm pondering what to do about that.
The original mmix simulator behavior is that memory magically appears
on access, initialized with 0, which is not preferable when chasing
bugs by throwing code the size of the gcc test-suite to the simulator.
The code in crti.S compatibly enables simulator machinery to identify
undefined memory and instead stopping the simulator with an error
(going to interactive mode for interactive runs). See
http://gcc.gnu.org/legacy-ml/gcc-patches/2012-10/msg01871.html for
more, including the mmix-sim.ch "patch file".
This fixes only one error in the gcc testsuite,
gcc.c-torture/execute/pr20621-1.c with LTO, where for some reason
gcc/lto chooses to move (writable) data that is only used to read 0 to
.rodata. An access (sufficiently far inside a block) in an
unregistered place is flagged as an invalid access.
The bpo-9m test that I had to adjust, actually exposes a wart: mmo
does not have the notion of symbol types (or sections) and the
test-case now has leading zeros at "Main" eventually leading to it
being misdiagnosed as being outside .text and .data, thus here mapped
to BFD as an absolute symbol. The test is not intended to check the
mmo symbol-type machinery, so I'm just tweaking it to be
symbol-type-neutral for "Main".
Since you have to jump through hoops to see the problem, I don't think
this commit is worth putting on the 2.35-branch.
ld:
* scripttempt/mmo.sc: Move .init first in .text output section.
* testsuite/ld-mmix/bpo-9m.d: Adjust accordingly.
Some recent tests added to gdb.base/shell.exp have been failing on
Windows host due to assumptions that the shell is a POSIX variant. On
Windows, GDB uses CMD.EXE via the system() call to run shell commands
instead.
There seems to be no obvious CMD.EXE equivalent for "kill -2 $$" to
signal the shell process, so this patch skips those tests on Windows
host. The second problem addressed here is that CMD.EXE only
recognizes double quotes, not single quotes; that change can be made
unconditionally since POSIX shells recognize double quotes as well.
2020-07-16 Sandra Loosemore <sandra@codesourcery.com>
gdb/testsuite/
* gdb.base/shell.exp: Skip pipe tests dependent on sh on Windows host.
Use double quotes instead of single quotes.
While experimenting with GDB on DWARF 5 with split debug (dwo files),
I discovered that GDB was not reading the rnglist index
properly (it needed to be reprocessed in the same way the loclist
index does), and that there was no code for reading rnglists out of
dwo files at all. Also, the rnglist address reading function
(dwarf2_rnglists_process) was adding the base address to all rnglist
entries, when it's only supposed to add it to the DW_RLE_offset_pair
entries (http://dwarfstd.org/doc/DWARF5.pdf, p. 53), and was not
handling several entry types.
- Added 'reprocessing' for reading rnglist index (as is done for loclist
index).
- Added code for reading rnglists out of .dwo files.
- Added several missing rnglist forms to dwarf2_rnglists_process.
- Fixed bug that was alwayas adding base address for rnglists (only
one form needs that).
- Updated dwarf2_rnglists_process to read rnglist out of dwo file when
appropriate.
- Added new functions cu_debug_rnglist_section & read_rnglist_index.
- Added new testcase, dw5-rnglist-test.{cc,exp}
Special note about the new testcase:
In order for the test case to test anything meaningful, it must be
compiled with clang, not GCC. The way to do this is as follows:
$ make check RUNTESTFLAGS="CC_FOR_TARGET=/path/to/clang CXX_FOR_TARGET=/path/to/clang++ dw5-rnglist-test.exp"
This following version of clang was used for this testing:
clang version 9.0.1-11
Target: x86_64-pc-linux-gnu
Thread model: posix
InstalledDir: /usr/bin
Change-Id: I3053c5ddc345720b8ed81e23a88fe537ab38748d
It was pointed out that the recently added test
gdb.fortran/ptype-on-functions.exp fails on older versions of
gfortran. This is because the ABI for passing string lengths changed
from a 4-byte to 8-byte value (on some targets).
This change is documented here:
https://gcc.gnu.org/gcc-8/changes.html.
Character variables longer than HUGE(0) elements are now possible on
64-bit targets. Note that this changes the procedure call ABI for
all procedures with character arguments on 64-bit targets, as the
type of the hidden character length argument has changed. The hidden
character length argument is now of type INTEGER(C_SIZE_T).
This commit just relaxes the pattern to accept any size of integer for
the string length argument.
gdb/testsuite/ChangeLog:
* gdb.fortran/ptype-on-functions.exp: Make the result pattern more
generic.
Change
67 48 8b 1c 25 ef cd ab 89 mov 0x89abcdef(,%eiz,1),%rbx
to
67 48 8b 1c 25 ef cd ab 89 mov 0x89abcdef,%rbx
in AT&T syntax and
67 48 8b 1c 25 ef cd ab 89 mov rbx,QWORD PTR [eiz*1+0x89abcdef]
to
67 48 8b 1c 25 ef cd ab 89 mov rbx,QWORD PTR ds:0x89abcdef
in Intel syntax.
gas/
PR gas/26237
* testsuite/gas/i386/evex-no-scale-64.d: Updated.
* testsuite/gas/i386/addr32.d: Likewise.
* testsuite/gas/i386/x86-64-addr32-intel.d: Likewise.
* testsuite/gas/i386/x86-64-addr32.d: Likewise.
opcodes/
PR gas/26237
* i386-dis.c (OP_E_memory): Don't display eiz with no scale
without base nor index registers.
* write.c (create_note_reloc): Add desc2_size parameter. Zero out
the addend field of REL relocations. Store the full addend into
the note for REL relocations.
We're currently running into:
...
FAIL: gdb.trace/entry-values.exp: disassemble bar
...
Since commit 36938cabf0 "x86: avoid attaching suffixes to unambiguous insns",
"callq" is disassembled as "call", and the test-case expects "callq".
Fix this by expecting "call" instead.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-07-15 Tom de Vries <tdevries@suse.de>
* gdb.trace/entry-values.exp: Expect "call" instead of "callq" if
is_amd64_regs_target.
After commit:
commit 8c2e4e0689
Date: Sun Jul 12 22:58:51 2020 -0400
gdb: add accessors to struct dynamic_prop
An existing bug was exposed in the Fortran type printing code. When
GDB is asked to print the type of a function that takes a dynamic
string argument GDB will try to read the upper bound of the string.
The read of the upper bound is written as:
if (type->bounds ()->high.kind () == PROP_UNDEFINED)
// Treat the upper bound as unknown.
else
// Treat the upper bound as known and constant.
However, this is not good enough. When printing a function type the
dynamic argument types will not have been resolved. As a result the
dynamic property is not PROP_UNDEFINED, but nor is it constant.
By rewriting this code to specifically check for the PROP_CONST case,
and treating all other cases as the upper bound being unknown we avoid
incorrectly treating the dynamic property as being constant.
gdb/ChangeLog:
* f-typeprint.c (f_type_print_base): Allow for dynamic types not
being resolved.
gdb/testsuite/ChangeLog:
* gdb.fortran/ptype-on-functions.exp: Add more tests.
* gdb.fortran/ptype-on-functions.f90: Likewise.
Irrespective of their encoding the resulting output should look the
same. Therefore wire the handling of PUSH/POP with GPR operands
encoded in the main opcode byte to the same logic used for other
operands. This frees up yet another macro character.
The value chosen for the 16-/32-bit immediate cases didn't work well
with the subsequent insn's REX prefix - we ought to pick a value the
upper two bytes of which evaluate to a 2-byte insn. Bump the values
accordingly, allowing the subsequent insn to actually have the intended
REX.W.
"Unambiguous" is is in particular taking as reference the assembler,
which also accepts certain insns - despite them allowing for varying
operand size, and hence in principle being ambiguous - without any
suffix. For example, from the very beginning of the life of x86-64 I had
trouble understanding why a plain and simple RET had to be printed as
RETQ. In case someone really used the 16-bit form, RETW disambiguates
the two quite fine.
Spotted when inspecting gcc testsuite logs, but this already is
covered by the ld-mmix testsuite, it's just that the assert is ignored
since the regexp match is for a substring and not anchored.
With the anchors added but not the bugfix, the ld.log shows that the
asserts cause a non-match as intended:
Executing on host: sh -c {./ld-new -LX/src/ld/testsuite/ld-mmix -m elf64mmix -o tmpdir/dump tmpdir/undef-2.o tmpdir/start.o 2>&1} /dev/null dump.tmp (timeout = 300)
./ld-new: BFD (GNU Binutils) 2.34.50.20200629 assertion fail X/src/bfd/elf64-mmix.c:2845
./ld-new: BFD (GNU Binutils) 2.34.50.20200629 assertion fail X/src/bfd/elf64-mmix.c:2845
./ld-new: BFD (GNU Binutils) 2.34.50.20200629 assertion fail X/src/bfd/elf64-mmix.c:2845
./ld-new: tmpdir/undef-2.o:(.text+0x0): undefined reference to `undefd'
failed with: <./ld-new: BFD (GNU Binutils) 2.34.50.20200629 assertion fail X/src/bfd/elf64-mmix.c:2845
./ld-new: BFD (GNU Binutils) 2.34.50.20200629 assertion fail X/src/bfd/elf64-mmix.c:2845
./ld-new: BFD (GNU Binutils) 2.34.50.20200629 assertion fail X/src/bfd/elf64-mmix.c:2845
./ld-new: tmpdir/undef-2.o:(.text+0x0): undefined reference to `undefd'>, expected: <\A[^\n\r]*undefined reference to `undefd'\Z>
FAIL: ld-mmix/undef-2
Gone with the fix of course, leaving just the intended "undefined
reference" like.
I'm not going to add anchors manually for all the "error:" strings in
the test-suite, not even in the mmix parts. Sorry, but I'll just do
it for *these* specific undefined-reference tests.
Just a thought: maybe the run_dump_test "error:" string should
*automatically* get anchor marks prepended and appended for a single
line match as in the patch, "\A[^\n\r]*" prepended and \Z appended
unless either anchor mark or \r or \n is present in the regexp?
Committed.
bfd:
* elf64-mmix.c (mmix_elf_relax_section): Improve accounting for
R_MMIX_PUSHJ_STUBBABLE relocs against undefined symbols.
ld/testsuite:
* testsuite/ld-mmix/undef-1.d, testsuite/ld-mmix/undef-1m.d,
testsuite/ld-mmix/undef-2.d, testsuite/ld-mmix/undef-2m.d: Add
start- and end-anchors to error-string to match just a
single-line error-message.
The comments modified in this patch claim that the addr_size parameters
can take the value 32 or 64 (suggesting the value is in bits). In fact,
the expected value is in bytes, either 4 or 8.
The actual value in the DWARF info is in bytes. And we can see that the
default values used (if addr_size == "default") are:
if {$_cu_addr_size == "default"} {
if {[is_64_target]} {
set _cu_addr_size 8
} else {
set _cu_addr_size 4
}
}
gdb/testsuite/ChangeLog:
* lib/dwarf.exp (Dwarf::cu, Dwarf::tu, Dwarf::lines): Change valid
values in documentation for addr_size to 4 and 8.
Change-Id: I4a02dca2bb7992198864e545ef099f020f54ff2f
PR 26198
* coffgen.c (_bfd_coff_section_already_linked): Allow for plugin
objects both before and after normal object files.
* elflink.c (_bfd_elf_section_already_linked): Likewise.
Since the addr32 (0x67) prefix zero-extends the lower 32 bits address to
64 bits, change disassembler to zero-extend the lower 32 bits displacement
to 64 bits when there is no base nor index registers.
gas/
PR gas/26237
* testsuite/gas/i386/addr32.s: Add tests for 32-bit wrapped around
address.
* testsuite/gas/i386/x86-64-addr32.s: Likewise.
* testsuite/gas/i386/addr32.d: Updated.
* testsuite/gas/i386/x86-64-addr32-intel.d: Likewise.
* testsuite/gas/i386/x86-64-addr32.d: Likewise.
* testsuite/gas/i386/ilp32/x86-64-addr32-intel.d: Likewise.
* testsuite/gas/i386/ilp32/x86-64-addr32.d: Likewise.
opcodes/
PR gas/26237
* i386-dis.c (OP_E_memory): Without base nor index registers,
32-bit displacement to 64 bits.
This commit changes the output of 'show endian'. Here is a
session before this commit:
(gdb) show endian
The target endianness is set automatically (currently little endian)
(gdb) set endian big
The target is assumed to be big endian
(gdb) show endian
The target is assumed to be big endian
(gdb)
After this commit the session now looks like this:
(gdb) show endian
The target endianness is set automatically (currently little endian).
(gdb) set endian big
The target is set to big endian.
(gdb) show endian
The target is set to big endian.
(gdb)
The changes are:
1. Each line ends with '.', and
2. After setting the endianness GDB is now a little more assertive;
'target is set to' not 'target is assumed to be', the user did just
tell us after all!
