Much like we autodetect the path to the run program when there is none
set explicitly, do the same for the rvdummy program. Otherwise the
default make check fails to execute the helper properly.
These trace calls don't seem to add anything useful and break the cris
hw tests, so punt them. They were disabled before commit 6d519a4606
but were re-enabled as part of TRACE macro cleanups.
Rather than include this for some targets, set it up so we can build it
all the time via the common code. This makes it easier for targets to
opt into it when they're ready, increases build coverage, and allows us
to centralize much of the logic.
We also get to delete tconfig.h from two more targets -- they were
setting WITH_DEVICES to 0 which has the same behavior as not defining
it at all.
While the SIM_HAVE_MODEL knob is gone, we now have WITH_MODEL_P, but it
is only used by the common sim-model code. We use it to declare dummy
model lists when the arch hasn't created its own.
The "MACH" and "MODEL" names are a bit generic and collide with symbols
used by other sections of code (like h8300's opcodes). Since these are
sim-specific types, they really should have a "SIM_" prefix.
Only four targets implement this function, and three of them do nothing.
The 4th merely calls abort. Since calls to this function are followed
by calls to sim_hw_abort or sim_io_error, this is largely useless. In
the two places where we don't, replace the call with sim_engine_abort.
We want to kill off the WITH_DEVICES logic in favor of WITH_HW, so this
is a good first step.
We enable WITH_CALLBACK_MEMORY everywhere and don't provide a way to
turn it off, and no target does so. Make it unconditional for all
to keep things simple.
Since the core always provides CPU_INDEX, use it. The current code
doesn't actually use it even though it should since it doesn't include
the right headers.
Most targets already default to loading code via their LMA, but for
a few, this means the default changes from loading VMA to LMA. It's
better to have the different targets be consistent, and allows some
code clean up.
We've moved custom option install for other targets to sim_open, so update
cris too. It's the last one using MODULE_LIST, so we can drop that from
the common code too.
This code relies on the old sim-break module, but that was deleted in 2003.
The module only existed for gdb to tell the sim to set breakpoints on its
behalf, but then that logic was abandoned in favor of gdb knowing all about
proper breakpoints (since it does already for non-sim targets). Some dead
code lived on in the older ports though -- clean it up now.
We build & bundle the watchpoint module everywhere, but we don't make
the command line flags available by default. A few targets opted in,
but most did not. Just enable the flag for everyone. Not all targets
will respect the flags (making them nops), but shouldn't be a big deal.
This is how we handle other common modules already.
No target has used this, and it's a cheap hack in place in using the
common memory module. We want everyone using that though, so drop
support for flatmem entirely.
Fix occurrences of left-shifting negative constants in C code.
sim/arm/ChangeLog:
* thumbemu.c (handle_T2_insn): Fix left shift of negative value.
* armemu.c (handle_v6_insn): Likewise.
sim/avr/ChangeLog:
* interp.c (sign_ext): Fix left shift of negative value.
sim/mips/ChangeLog:
* micromips.igen (process_isa_mode): Fix left shift of negative
value.
sim/msp430/ChangeLog:
* msp430-sim.c (get_op, put_op): Fix left shift of negative value.
sim/v850/ChangeLog:
* simops.c (v850_bins): Fix left shift of negative value.
* aarch64/simulator.c (system_get): New function. Provides read
access to the dczid system register.
(do_mrs): New function - implements the MRS instruction.
(dexSystem): Call do_mrs for the MRS instruction. Halt on
unimplemented system instructions.
* msp430-sim.c (sim_open): Check for needed memory at address
0x500 not 0x200.
(get_op): Add support for F5 hardware multiply addresses.
(put_op): Likewise.
POSIX does not define $< behavior in ordinary rules, so avoid its use
to fix building on non-GNU make setups.
Reported-by: Christopher January <chris.january@allinea.com>
Keeping track of the right printf formats for the various types can be
a pretty big hassle, especially in common code which has to support a
variety of bitsizes. Take a page from the existing standards and add
a set of PRI macros which hide the details in a common header.
This is not entirely useful as avr doesn't (yet) store its register
state in the cpu state, but it does allow for switching to the common
code for these functions.
Having this be a config option doesn't make sense: the code size is
pretty much the same (as all the logic is still active), and if it's
disabled, the sim throws an error if you try to use it. That means
we can't break sims that weren't using it before by enabling it all
the time.
Building a gdb that includes the PPC sim in C++ mode fails to link with:
(...)s.o compile-object-load.o compile-object-run.o compile-loc2c.o compile-c-support.o inflow.o init.o \
../sim/ppc/libsim.a ../readline/libreadline.a ../opcodes/libopcodes.a ../bfd/libbfd.a -lz ../libiberty/libiberty.a ../libdecnumber/libdecnumber.a -ldl -ldl -lncurses -lm -ldl -lguile-2.0 -lgc -lpthread -ldl -lutil -lm -lpython2.7 -Xlinker -export-dynamic -lexpat -llzma -lbabeltrace -lbabeltrace-ctf ../libiberty/libiberty.a build-gnulib/import/libgnu.a
../sim/ppc/libsim.a(sim_calls.o): In function `sim_open':
/home/pedro/gdb/mygit/cxx-convertion/src/sim/ppc/sim_calls.c:73: undefined reference to `printf_filtered'
/home/pedro/gdb/mygit/cxx-convertion/src/sim/ppc/sim_calls.c:73: undefined reference to `printf_filtered'
../sim/ppc/libsim.a(sim_calls.o): In function `sim_close':
/home/pedro/gdb/mygit/cxx-convertion/src/sim/ppc/sim_calls.c:93: undefined reference to `printf_filtered'
/home/pedro/gdb/mygit/cxx-convertion/src/sim/ppc/sim_calls.c:93: undefined reference to `printf_filtered'
../sim/ppc/libsim.a(sim_calls.o): In function `sim_load':
/home/pedro/gdb/mygit/cxx-convertion/src/sim/ppc/sim_calls.c:102: undefined reference to `printf_filtered'
../sim/ppc/libsim.a(sim_calls.o):/home/pedro/gdb/mygit/cxx-convertion/src/sim/ppc/sim_calls.c:102: more undefined references to `printf_filtered' follow
collect2: error: ld returned 1 exit status
The undefined references come from TRACE macro calls, which expand to
calls to printf_filtered.
But note that the sim's 'printf_filtered' is actually a #define to
'sim_io_printf_filtered', in sim_callbacks.h :
#define printf_filtered sim_io_printf_filtered
AFAICS, this is not meant to call gdb's printf_filtered function. The
ChangeLog entry that added the printf_filtered macro reads:
Tue Jul 30 21:12:24 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
* sim_callbacks.h (sim_io_printf_filtered): Replace
printf_filtered with a local simulator specific version. Add
#define printf_filtered to simplify updating of existing code.
That is, just another incomplete/partial transition. Maybe prior to
1996 this was really meant to call gdb's printf_filtered version.
The reference to printf_filtered appears because sim_calls.c, the
compilation unit that fails to link, has this at the top:
#undef printf_filtered /* blow away the mapping */
presumably so that this further below:
void
sim_io_printf_filtered(const char *fmt,
...)
{
(...)
callbacks->printf_filtered(callbacks, "%s", message);
}
works. So those TRACE macros instances in sim_calls.c just happen to
work because gdb is linked in, which satisfies the 'printf_filtered'
reference, when GDB is built in C mode. When built in C++ mode, the
problem is exposed, as GDB's printf_filtered is mangled.
The fix here is to make the TRACE macro call sim_io_printf_filtered
directly.
(Standalone "run" doesn't fail to link simply because the offending
routines are not part of its link.)
sim/ppc/ChangeLog
2015-11-17 Pedro Alves <palves@redhat.com>
* debug.h (TRACE, ITRACE, DTRACE, DITRACE, PTRACE): Call
sim_io_printf_filtered instead of printf_filtered.
Now that all arches (for the most part) have moved over, move sim-stop.o,
sim-reason.o, and sim-reg.o to the common object list and out of all the
arch ports.
Now that we have access to the sim state everywhere, we can convert to
the common engine logic for overall processing. This frees us up from
tracking exception state ourselves.
The cr16 port has a lot of translation/offset logic baked into it, but
it all looks like copy & paste from the d10v port rather than something
the cr16 port wants.
By itself, this commit doesn't really change anything. It lays the
groundwork for using the cpu state in follow up commits, both for
engine state and for cpu state. Splitting things up this way so it
is easier to see how things have changed.
Now that we have access to the sim state everywhere, we can convert to
the common engine logic for overall processing. This frees us up from
tracking exception state ourselves.
By itself, this commit doesn't really change anything. It lays the
groundwork for using the cpu state in follow up commits, both for
engine state and for cpu state. Splitting things up this way so it
is easier to see how things have changed.
This avoids using global variables to hold the cpu state so we can
better integrate with the sim common code.
There's also a minor fix here where we move the pc register back into
the state that is accessible by the asints array. When it was pulled
out previously, the reg store/fetch functions broke, but no one really
noticed as the mcore gdb port was dropped a while back.
This is not entirely useful as mcore doesn't (yet) store its register
state in the cpu state, but it does allow for switching to the common
code for these functions.
Other than the nice advantage of all sims having to declare one fewer
common function, this also fixes leakage in pretty much every sim.
Many were not freeing any resources, and a few were inconsistent as
to the ones they did. Now we have a single module that takes care of
all the logic for us.
Most of the non-cgen based ones could be deleted outright. The cgen
ones required adding a callback to the arch-specific cleanup func.
The few that still have close callbacks are to manage their internal
state.
We do not convert erc32, m32c, ppc, rl78, or rx as they do not use
the common sim core.
Sometimes in tests, we need supplemental files like linker scripts or
board helper files. There's no way to set those flags in the tests
currently and relative paths don't work (breaks out of tree builds).
Update the main option parser to replace some strings on the fly. Now
tests can do things like:
Long term we'll want to switch the framework to use the dejagnu helpers
like dg-xxx that gcc & gdb utilize. But that'll require more rework.
When handling left saturated ashifts with negative immediates, they
should be treated as right ashifts. This matches hardware behavior.
Reported-by: Igor Rayak <igorr@gitatechnologies.com>
The FT32 simulator was not correctly simulating the behavior of the
program memory (PM) write port. When it is locked, writes to the
data register do nothing.
2015-09-25 Andrew Bennett <andrew.bennett@imgtec.com>
Ali Lown <ali.lown@imgtec.com>
sim/common/
* sim-bits.h (EXTEND6): New macro.
(EXTEND12): New macro.
(EXTEND25): New macro.
sim/mips/
* Makefile.in (tmp-micromips): New rule.
(tmp-mach-multi): Add support for micromips.
* configure.ac (mips*-sde-elf* | mips*-mti-elf*): Made a multi sim
that works for both mips64 and micromips64.
(mipsisa32r2*-*-*): Made a multi sim that works for mips32 and
micromips32.
Add build support for micromips.
* dsp.igen (do_ph_s_absq, do_w_s_absq, do_qb_s_absq, do_addsc,
do_addwc, do_bitrev, do_extpv, do_extrv, do_extrv_s_h, do_insv,
do_lxx do_modsub, do_mthlip, do_mulsaq_s_w_ph, do_ph_packrl, do_qb_pick
do_ph_pick, do_qb_ph_precequ, do_qb_ph_preceu, do_w_preceq
do_w_ph_precrq, do_ph_qb_precrq, do_w_ph_rs_precrq do_qb_w_raddu,
do_rddsp, do_repl, do_shilov, do_ph_shl, do_qb_shl do_w_s_shllv,
do_ph_shrlv, do_w_r_shrav, do_wrdsp, do_qb_shrav, do_append,
do_balign, do_ph_w_mulsa, do_ph_qb_precr, do_prepend): New functions.
Refactored instruction code to use these functions.
* dsp2.igen: Refactored instruction code to use the new functions.
* interp.c (decode_coproc): Refactored to work with any instruction
encoding.
(isa_mode): New variable
(RSVD_INSTRUCTION): Changed to 0x00000039.
* m16.igen (BREAK16): Refactored instruction to use do_break16.
(JALX32): Add mips32, mips64, mips32r2 and mips64r2 models.
* micromips.dc: New file.
* micromips.igen: New file.
* micromips16.dc: New file.
* micromipsdsp.igen: New file.
* micromipsrun.c: New file.
* mips.igen (do_swc1): Changed to work with any instruction encoding.
(do_add do_addi do_andi do_dadd do_daddi do_dsll32 do_dsra32
do_dsrl32, do_dsub, do_break, do_break16, do_clo, do_clz, do_dclo
do_dclz, do_lb, do_lh, do_lwr, do_lwl, do_lwc, do_lw, do_lwu, do_lhu
do_ldc, do_lbu, do_ll, do_lld, do_lui, do_madd, do_dsp_madd, do_maddu
do_dsp_maddu, do_dsp_mfhi, do_dsp_mflo, do_movn, do_movz, do_msub
do_dsp_msub, do_msubu, do_dsp_msubu, do_mthi, do_dsp_mthi, do_mtlo
do_dsp_mtlo, do_mul, do_dsp_mult, do_dsp_multu, do_pref, do_sc, do_scd
do_sub, do_sw, do_teq, do_teqi, do_tge, do_tgei, do_tgeiu, do_tgeu, do_tlt
do_tlti, do_tltiu, do_tltu, do_tne, do_tnei, do_abs_fmt, do_add_fmt
do_alnv_ps, do_c_cond_fmt, do_ceil_fmt, do_cfc1, do_ctc1, do_cvt_d_fmt
do_cvt_l_fmt, do_cvt_ps_s, do_cvt_s_fmt, do_cvt_s_pl, do_cvt_s_pu
do_cvt_w_fmt, do_div_fmt, do_dmfc1b, do_dmtc1b, do_floor_fmt, do_luxc1_32
do_luxc1_64, do_lwc1, do_lwxc1, do_madd_fmt, do_mfc1b, do_mov_fmt, do_movtf
do_movtf_fmt, do_movn_fmt, do_movz_fmt, do_msub_fmt, do_mtc1b, do_mul_fmt
do_neg_fmt, do_nmadd_fmt, do_nmsub_fmt, do_pll_ps, do_plu_ps, do_pul_ps
do_puu_ps, do_recip_fmt, do_round_fmt, do_rsqrt_fmt, do_prefx, do_sdc1
do_suxc1_32, do_suxc1_64, do_sqrt_fmt, do_sub_fmt, do_swc1, do_swxc1
do_trunc_fmt): New functions, refactored from existing instructions.
Refactored instruction code to use these functions.
(RSVD): Changed to use new reserved instruction.
(loadstore_ea, not_word_value, unpredictable, check_mt_hilo, check_mf_hilo,
check_mult_hilo, check_div_hilo, check_u64, do_luxc1_32, do_sdc1, do_suxc1_32,
check_fmt_p, check_fpu, do_load_double, do_store_double): Added micromips32
and micromips64 models.
Added include for micromips.igen and micromipsdsp.igen
Add micromips32 and micromips64 models.
(DecodeCoproc): Updated to use new macro definition.
* mips3264r2.igen (do_dsbh, do_dshd, do_dext, do_dextm, do_dextu, do_di,
do_dins, do_dinsm, do_ei, do_ext, do_mfhc1, do_mthc1, do_ins, do_dinsu,
do_seb, do_seh do_rdhwr, do_wsbh): New functions.
Refactored instruction code to use these functions.
* sim-main.h (CP0_operation): New enum.
(DecodeCoproc): Updated macro.
(IMEM32_MICROMIPS, IMEM16_MICROMIPS, MICROMIPS_MINOR_OPCODE,
MICROMIPS_DELAYSLOT_SIZE_ANY, MICROMIPS_DELAYSLOT_SIZE_16, MICROMIPS_DELAYSLOT_SIZE_32,
ISA_MODE_MIPS32 and ISA_MODE_MICROMIPS): New defines.
(sim_state): Add isa_mode field.
sim/testsuite/sim/mips/
* basic.exp (run_micromips_test, run_sim_tests): New functions
Add support for micromips tests.
* hilo-hazard-4.s: New file.
* testutils.inc (_dowrite): Changed reserved instruction encoding.
(writemsg): Moved the la and li instructions before the data they are
assigned to, which prevents a bug where MIPS32 relocations are used instead
of micromips relocations when building for micromips.
The FT32 simulator has character output, of course. This patch
adds character input, which lets the simulator run interactive
FT32 applications, e.g. language interpreters.
* Makefile.in (SIM_EXTRA_CFLAGS): Add -lm.
* armdefs.h (ARMdval, ARMfval): New types.
(ARM_VFP_reg): New union.
(struct ARMul_State): Add VFP_Reg and FPSCR fields.
(VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor
macros for the new VFP_Reg field.
* armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT,
QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8,
USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX
instructions.
(handle_VFP_move): New function.
(ARMul_Emulate16): Add checks for newly supported v6
instructions. Add support for VMRS, VMOV and MRC instructions.
(Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when
operating in v6 mode.
* armemu.h (t_resolved): Define.
* armsupp.c: Include math.h.
(handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH,
VSTM, VLDM and VPOP instructions.
(ARMul_LDC): Test for co-processor 10 or 11 and pass call to the
new handle_VFP_xfer function.
(ARMul_STC): Likewise.
(handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS,
VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP,
VCMPE and VCVT instructions.
(ARMul_CDP): Test for co-processor 10 or 11 and pass call to the
new handle_VFP_op function.
* thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros.
(test_cond): New function. Tests a condition and returns non-zero
if the condition has been met.
(handle_IT_block): New function.
(in_IT_block): New function.
(IT_block_allow): New function.
(ThumbExpandImm): New function.
(handle_T2_insn): New function. Handles T2 thumb instructions.
(handle_v6_thumb_insn): Add next_instr and pc parameters.
(ARMul_ThumbDecode): Add support for IT blocks. Add support for
v6 instructions.
* wrapper.c (sim_create_inferior): Detect a thumb address and call
SETT appropriately.
The bfin/msp430 ports already had trace logic set up for reading/writing
cpu registers, albeit using different unrelated levels (core & vpu). Add
a proper register class for these and for other ports.
This helper macro has largely the same behavior as libiberty's lbasename.
There is a slight nuance related to colons, but it's not clear what the
point of that is, and the code implies that it just wants the basename.
Since --trace-debug is for people hacking on the sim sources rather than
people just using the sim, default it to off. This matches the behavior
of other debug knobs we have.
Since we always include the raw syscall number when tracing, also
including it in the name when it's unknown is redundant. Simplify
the code by using a constant string.
The new helpers for walking the maps tested the wrong value for exiting
the for loop. This caused crashes when looking up entries that were not
in the map.
Many ports have the same sim syscall logic, so add some helpers to handle
all the common details. The arches still have to deal with the unpacking
and packing of the syscall arguments, but the rest of the sim<->callback
glue is now shared.
When tracing, we often want to display the human readable name for the
various syscall/errno values. Rather than make each target duplicate
the lookup, extend the existing maps to include the string directly,
and add helper functions to look up the constants.
While most targets are autogenerated (from libgloss), the bfin/cris
targets have custom maps for the Linux ABI which need to be updated
by hand.
The Blackfin port had some TRACE_xxx macros for easily logging trace data.
Use these as a base for common ones that have a simple form and match the
existing sets of helper macros.
The cgen code declares some macros/funcs using the trace_xxx prefix, but
the code isn't generic and only works with cgen targets. This is blocking
the creation of new common trace functions.
Let's blindly add cgen_xxx prefixes to all these symbols. Some already
use this convention to avoid conflicts, so it makes sense to align them.
In the future we might want to move some to the common trace core, but
one thing at a time.
First we convert the ETRACE_P to STRACE_EVENTS_P. This means we move from
using the sim_events.trace storage to the common sim_state_base.trace_data
array. With that deleted, the common trace init code can be simplified so
the sim state works the same as the sim cpu.
This is the only sim that sets up its own WITH_TRACE mask and it conflicts
with the user setting their own list at configure time. Drop it to match
all the other sims.
The syscall path was the only code checking the custom exception state
after recent cleanups. Once we change that to the common engine halt
function, we can delete that state entirely.
This also helps highlight some other dead code that we can cull.
These printf statements are showing "word" objects which are typedefed
from long, so make sure to use l with %x when printing them to avoid
warnings from gcc.
Re-use the existing memory core that handles reads/writes.
The verbose command is converted to the common --verbose flag
since only a few call sites use it now.
In preparation for converting to the common memory framework, the custom
commands get in our way. But when we realize that gdb support has been
dropped for mcore, it makes things a bit easier: the main runner does not
let you run arbitrary commands once simulation starts.
So lets disable watchpoint support until it can be converted to the common
watchpoint logic. There's already an ifdef to let us do that.
We straight up drop support for the dumpmem command (no other sim supports
this, and if it's a feature people want, we can add a common func) and the
clearstats command (not a big deal -- just restart your simulation).
We leave in place the verbose check points as a follow up commit will cut
that over to common logic.
Now that libgloss has a header tracking the syscalls for this arch, we
can update the database to include it for the symbolic constants/maps.
Then we can switch the mcore syscall callbacks over to the common ones.
Since newlib no longer shares the same repo as binutils/gdb, we have to go
searching further afield to locate the sources. We still look at the top
level for newlib, but if that is not found, we also try up one dir outside
of this source tree. It sucks, but better than the status quo (no workie).
Change data ordering in emulated memory from target order (big endian)
to host order. Improves performance and simplifies most memory
operations. Requires some byte twisting during stores on little
endian hosts (intel). Also removed support for little-endian binaries.
Now that we've unified sim-cpu, we can delete the duplicate sim-engine
hooks -- these targets defined these only because they didn't fully
implement the sim-cpu callbacks.
Since every target typedefs this the same way, move it to the common code.
We have to leave Blackfin behind here for now because of inter-dependencies
on types and headers: sim-base.h includes sim-model.h which needs types in
machs.h which needs types in bfim-sim.h which needs SIM_CPU.
Almost every target defines sim_cia the same way -- either using the
address_word type directly, or a type of equivalent size. The only
odd one out is sh64 (who has 32bit address_word and 64bit cia), and
even that case doesn't seem to make sense. We'll put off clean up
though of sh64 and at least set up a sensible default for everyone.
Re-use the existing memory core that handles reads/writes.
This drops support for the dumpmem command, but gdb itself has
support for dumping memory regions.
The verbose command is converted to the common --verbose flag
since only two call sites use it now.
Support for the clearstats command is dropped entirely, but no
other sim really does this, and the same thing can be done by
reloading. If it's important (clearing cycle stats) to someone,
we can add a common function for it.
The CIA_{GET,SET} macros serve the same function as CPU_PC_{GET,SET}
except the latter adds a layer of indirection via the sim state. This
lets models set up different functions at runtime and doesn't reach so
directly into the arch-specific cpu state.
It also doesn't make sense to have two sets of macros that do exactly
the same thing, so lets standardize on the one that gets us more.
Now that all the targets are utilizing CPU_PC_{FETCH,STORE}, and the
cpu state is multicore, and the STATE_CPU defines match, we can move
it all to the common code.
This sets up the sim_state structure and the cpu member to match what we
do in most other sims, and what the common code suggests. This is a step
to unifying on the sim-cpu.o object.
The old run frontend had a --version option, but the new common
sim-options file does not. Restore support for that so we can
get version info out of `run` when using the new frontend.
With sim-hrw.o being built & linked in the common list, some people are
getting linking errors now for these targets. Move the main objects that
provide these functions before the common list to avoid that.
The nrun conversion was slightly incorrect in how it stopped when an
exception occurred. We still set cpu.asregs.exception, but nothing
was checking it anymore. Convert all of that to sim_engine_halt.
To keep things from regressing again, add a basic testsuite too.
Way back in aba6488e0b, a bunch of signal
defines were changed to TARGET_SIGNAL_xxx. For d10v, the transition was
incomplete which lead to sim_stop_reason using the new set but sim_resume
still using the old set. Which meant in some cases, the sim would never
actually stop.
Convert all the remaining SIGxxx defines in here to TARGET_SIGNAL_xxx.
This has the nice side effect of fixing the testsuite.
Now that all targets have been converted to nrun, we can finally punt
this old inconsistent interface.
A few stray references to the old run were sprinkled about; clean them
up in the process.
We leave behind the run(1) man page mostly so that we get it updated for
the new nrun interface.
With newer versions of gcc (5.x), the extern inline we're using with the
cgen-{mem,ops} modules no longer work. Since this code really wants the
gnu inline semantics, use that attribute explicitly.
A lot of cpu state is stored in global variables, as is memory handling.
The sim_size support needs unwinding at some point. But at least this
is an improvement on the status quo.
In preparation for converting to nrun, call the common functions that
are needed. This doesn't produce any new warnings, and the generated
code should be the same.
A lot of cpu state is stored in global variables, as is memory handling.
The sim_size support needs unwinding at some point. But at least this
is an improvement on the status quo.
In preparation for converting to nrun, call the common functions that
are needed. This doesn't produce any new warnings, and the generated
code should be the same.
Looks like historical restructuring in this dir lost the d10v-elf subdir
and no one noticed in the meantime. Re-add it to the testsuite.
There are some failures, but better some tests get run than none at all.
A lot of cpu state is stored in global variables, as is memory handling.
The sim_size support needs unwinding at some point. But at least this
is an improvement on the status quo.
In preparation for converting to nrun, call the common functions that
are needed. This doesn't produce any new warnings, and the generated
code should be the same.
This port already was storing its cpu state in the sim_cpu structure, so
converting it over was pretty easy. It is allocating memory itself still,
but we'll fix that up in the future at some point.
The mcore port had a few structs/defines that were never used.
Similarly, the microblaze port, because it was copied from mcore, has
that same dead code, and more. The watchpoint logic was never actually
used. Punt it all.
Since the sim doesn't have any debug support in it, we can only exit
cleanly. But this is still better than nothing.
Change the default microblaze sim to not dump the debug load output
when running. No other does this, and it breaks the testsuite.
If a test doesn't write anything at all to stdout, the current test
framework can't support that. Even if you put a blank output line:
# output:
the setup happily clobbers that with a default pass/fail string.
Tweak the parsing logic so we only set the output to pass/fail when
the test has no output marker.
With newer versions of gcc (5.x), the extern inline we're using with the
sim-arange module no longer works. Since this code really wants the gnu
inline semantics, use that attribute explicitly.
Reported-by: DJ Delorie <dj@redhat.com>
Reported-by: Joel Sherrill <joel.sherrill@oarcorp.com>
Since the testsuite subdir has to handle dynamic arch values already,
there's no real value in requiring arches to opt in to it. Most have
a testsuite now anyways, and we're requiring it in the future.
In preparation for converting to nrun, call the common functions that
are needed. This doesn't produce any new warnings, and the generated
code should be the same.
A lot of cpu state is stored in global variables, as is memory handling.
The sim_size support needs unwinding at some point. But at least this
is an improvement on the status quo.
In preparation for converting to nrun, call the common functions that
are needed. This doesn't produce any new warnings, and the generated
code should be the same.
The sbrk syscall assumes the sbrk region starts after the bss and the
current implementation requires a bss section to exist. Since there
is no requirement for programs to have a bss in general, we want to
drop this check. However, there is still the sbrk syscall that wants
to know about the region.
Since libgloss doesn't actually use the sbrk syscall (it implements
sbrk in its own way), and the sim really shouldn't enforce a specific
memory layout on programs, lets simply delete sbrk support. Now it
always returns an error.
