The machinery to do this was there, but not enabled if the terminator
was the only thing in the section.
bfd/
* elf-eh-frame.c (_bfd_elf_parse_eh_frame): Don't exit early
for a section containing just a terminator. Allow multiple
terminators at end of section.
* elflink.c (bfd_elf_discard_info): Iterate over .eh_frame
sections when not adding alignment. Assert on terminator in
the middle of FDEs.
ld/
* testsuite/ld-elf/eh3.d: Update.
* testsuite/ld-elf/eh4.d: Update.
Since elfxx-x86.lo needs elf64.lo with 64-bit BFD, add elf64.lo together
with elfxx-x86.lo to bfd_backends for 64-bit BFD.
* configure.ac (bfd_backends): Add elf64.lo together with
elfxx-x86.lo for 64-bit BFD.
* configure: Regenerated.
The howto for R_FT32_18 was using complain_overflow_signed. But some
valid address calculations exceed the range of this reloc. Changing it
to complain_overflow_dont allows them.
bfd/ChangeLog:
* elf32-ft32.c (ft32_elf_howto_table): Use
complain_overflow_dont for R_FT32_18.
elf64_vms_close_and_cleanup calls bfd_get_size, which calls
iovec->bstat. cache_bstat ends up adding the bfd to the cache lru
list, negating the bfd_cache_close call in bfd_close_all_done. So
there is a dangling pointer into the freed and then reused bfd. Thus,
bfd_cache_close must be called after _close_and_cleanup, or better,
via iovec->bclose.
PR binutils/22032
* opncls.c (bfd_close_all_done): Don't call bfd_cache_close
before _close_and_cleanup. Call iovec->bclose after.
(bfd_close): Remove code common to, and call, bfd_close_all_done.
Since both elf32-i386.c and elf64-x86-64.c support targets with
different ELF_MACHINE_CODEs, _bfd_x86_elf_link_hash_table_create
should check target_id instead of elf_machine_code.
* elfxx-x86.c (_bfd_x86_elf_link_hash_table_create): Check
target_id instead of elf_machine_code.
Fix a bug in commit a6ebf6169a ("MIPS: Convert cross-mode BAL to
JALX") and in BFD linker relaxation correct the microMIPS interpretation
of the branch offset, which is supposed to be shifted by 1 bit, rather
than 2 as in the regular MIPS case.
bfd/
* elfxx-mips.c (mips_elf_perform_relocation): Correct microMIPS
branch offset interpretation.
gas/
* testsuite/gas/mips/branch-addend-micromips.d: New test.
* testsuite/gas/mips/branch-addend-micromips-n32.d: New test.
* testsuite/gas/mips/branch-addend-micromips-n64.d: New test.
* testsuite/gas/mips/branch-addend-micromips.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* testsuite/ld-mips-elf/bal-jalx-addend-micromips.d: New test.
* testsuite/ld-mips-elf/bal-jalx-addend-micromips-n32.d: New
test.
* testsuite/ld-mips-elf/bal-jalx-addend-micromips-n64.d: New
test.
* testsuite/ld-mips-elf/bal-jalx-local-micromips.d: New test.
* testsuite/ld-mips-elf/bal-jalx-local-micromips-n32.d: New
test.
* testsuite/ld-mips-elf/bal-jalx-local-micromips-n64.d: New
test.
* testsuite/ld-mips-elf/bal-jalx-pic-micromips.d: New test.
* testsuite/ld-mips-elf/bal-jalx-pic-micromips-n32.d: New test.
* testsuite/ld-mips-elf/bal-jalx-pic-micromips-n64.d: New test.
* testsuite/ld-mips-elf/bal-jalx-pic-ignore-micromips.d: New
test.
* testsuite/ld-mips-elf/bal-jalx-pic-ignore-micromips-n32.d: New
test.
* testsuite/ld-mips-elf/bal-jalx-pic-ignore-micromips-n64.d: New
test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
In the TLS GD/LD to LE optimization, ld replaces a sequence like
addi 3,2,x@got@tlsgd R_PPC64_GOT_TLSGD16 x
bl __tls_get_addr(x@tlsgd) R_PPC64_TLSGD x
R_PPC64_REL24 __tls_get_addr
nop
with
addis 3,13,x@tprel@ha R_PPC64_TPREL16_HA x
addi 3,3,x@tprel@l R_PPC64_TPREL16_LO x
nop
When the tprel offset is small, this can be further optimized to
nop
addi 3,13,x@tprel
nop
bfd/
* elf64-ppc.c (struct ppc_link_hash_table): Add do_tls_opt.
(ppc64_elf_tls_optimize): Set it.
(ppc64_elf_relocate_section): Nop addis on TPREL16_HA, and convert
insn on TPREL16_LO and TPREL16_LO_DS relocs to use r13 when
addis would add zero.
* elf32-ppc.c (struct ppc_elf_link_hash_table): Add do_tls_opt.
(ppc_elf_tls_optimize): Set it.
(ppc_elf_relocate_section): Nop addis on TPREL16_HA, and convert
insn on TPREL16_LO relocs to use r2 when addis would add zero.
gold/
* powerpc.cc (Target_powerpc::Relocate::relocate): Nop addis on
TPREL16_HA, and convert insn on TPREL16_LO and TPREL16_LO_DS
relocs to use r2/r13 when addis would add zero.
ld/
* testsuite/ld-powerpc/tls.s: Add calls with tls markers.
* testsuite/ld-powerpc/tls32.s: Likewise.
* testsuite/ld-powerpc/powerpc.exp: Run tls marker tests.
* testsuite/ld-powerpc/tls.d: Adjust for TPREL16_HA/LO optimization.
* testsuite/ld-powerpc/tlsexe.d: Likewise.
* testsuite/ld-powerpc/tlsexetoc.d: Likewise.
* testsuite/ld-powerpc/tlsld.d: Likewise.
* testsuite/ld-powerpc/tlsmark.d: Likewise.
* testsuite/ld-powerpc/tlsopt4.d: Likewise.
* testsuite/ld-powerpc/tlstoc.d: Likewise.
There isn't a good reason for ld.bfd to behave differently from gold
in the code generated by TLS GD/LD to LE optimization.
bfd/
* elf64-ppc.c (ppc64_elf_relocate_section): When optimizing
__tls_get_addr call sequences to LE, don't move the addi down
to the nop. Replace the bl with addi and leave the nop alone.
ld/
* testsuite/ld-powerpc/tls.d: Update.
* testsuite/ld-powerpc/tlsexe.d: Update.
* testsuite/ld-powerpc/tlsexetoc.d: Update.
* testsuite/ld-powerpc/tlsld.d: Update.
* testsuite/ld-powerpc/tlsmark.d: Update.
* testsuite/ld-powerpc/tlsopt4.d: Update.
* testsuite/ld-powerpc/tlstoc.d: Update.
Since _bfd_elf_ifunc_get_synthetic_symtab is no longer called by x86
get_synthetic_symtab, it is now unused. This patch removes it.
* elf-bfd.h (_bfd_elf_ifunc_get_synthetic_symtab): Removed.
* elf-ifunc.c (_bfd_elf_ifunc_get_synthetic_symtab): Likewise.
We shpouldn't generate copy relocation to resolve reference to protected
data symbol defined in shared object with the NO_COPY_ON_PROTECTED
property. This patch adds a bit to elf_obj_tdata as well as
elf_i386_link_hash_entry and elf_x86_64_link_hash_entry to track the bfd
with the NO_COPY_ON_PROTECTED property as well as protected symbol
defined in shared object. extern_protected_data is set to FALSE if any
input relocatable file contains the NO_COPY_ON_PROTECTED property.
bfd/
PR ld/21997
* elf-bfd.h (elf_obj_tdata): Use ENUM_BITFIELD on object_id,
dyn_lib_class and has_gnu_symbols. Change bad_symtab to bitfield.
Add a has_no_copy_on_protected bitfield.
(elf_has_no_copy_on_protected): New.
* elf-properties.c (_bfd_elf_parse_gnu_properties): Set
elf_has_no_copy_on_protected for GNU_PROPERTY_NO_COPY_ON_PROTECTED.
(elf_merge_gnu_property_list): Likewise.
(_bfd_elf_link_setup_gnu_properties): Set extern_protected_data
to FALSE for elf_has_no_copy_on_protected.
* elf32-i386.c (SYMBOL_NO_COPYRELOC): New.
(elf_i386_link_hash_entry): Add def_protected.
(elf_i386_adjust_dynamic_symbol): Also check SYMBOL_NO_COPYRELOC
when checking info->nocopyreloc.
(elf_i386_link_setup_gnu_properties): Don't set
extern_protected_data here.
(elf_i386_merge_symbol_attribute): New function.
(elf_backend_merge_symbol_attribute): New.
* elf64-x86-64.c (SYMBOL_NO_COPYRELOC): New.
(elf_x86_64_link_hash_entry): Add def_protected.
(elf_x86_64_need_pic): Report protected symbol for def_protected.
(elf_x86_64_adjust_dynamic_symbol): Also check SYMBOL_NO_COPYRELOC
when checking info->nocopyreloc.
(elf_x86_64_relocate_section): Also check for R_X86_64_PC32
relocation run-time overflow and unresolvable R_X86_64_32S
relocation against protected data symbol defined in shared object
with GNU_PROPERTY_NO_COPY_ON_PROTECTED.
(elf_x86_64_link_setup_gnu_properties): Don't set
extern_protected_data here.
(elf_x86_64_merge_symbol_attribute): New function.
(elf_backend_merge_symbol_attribute): New.
ld/
PR ld/21997
* testsuite/ld-i386/i386.exp: Run PR ld/21997 tests.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-i386/pr21997-1a.S: New file.
* testsuite/ld-i386/pr21997-1b.c: Likewise.
* testsuite/ld-i386/pr21997-1c.S: Likewise.
* testsuite/ld-x86-64/pr21997-1a.S: Likewise.
* testsuite/ld-x86-64/pr21997-1a.err: Likewise.
* testsuite/ld-x86-64/pr21997-1b.c: Likewise.
* testsuite/ld-x86-64/pr21997-1b.err: Likewise.
* testsuite/ld-x86-64/pr21997-1c.c: Likewise.
Tidy how these are handled in PIEs.
* elf32-ppc.c (must_be_dyn_reloc): Use bfd_link_dll. Comment.
(ppc_elf_check_relocs): Only set DF_STATIC_TLS in shared libs.
(ppc_elf_relocate_section): Comment fix.
* elf64-ppc.c (must_be_dyn_reloc): Use bfd_link_dll. Comment.
(ppc64_elf_check_relocs): Only set DF_STATIC_TLS in shared libs.
Support dynamic relocs for TPREL16 when non-pic too.
(dec_dynrel_count): Adjust TPREL16 handling as per check_relocs.
(ppc64_elf_relocate_section): Support dynamic relocs for TPREL16
when non-pic too.
On x86-64, when -z nocopyreloc is used to build executable, relocations
may overflow at run-time or may not be resolved without PIC. This patch
checks these conditions and issues an error with suggestion for -fPIC.
bfd/
PR ld/22001
* elf64-x86-64.c (elf_x86_64_relocate_section): Check for
R_X86_64_PC32 relocation run-time overflow and unresolvable
R_X86_64_32S relocation with -z nocopyreloc.
ld/
PR ld/22001
* testsuite/ld-i386/i386.exp: Run -z nocopyreloc tests.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* ld/testsuite/ld-i386/pr22001-1a.c: New file.
* ld/testsuite/ld-i386/pr22001-1b.c: Likewise.
* ld/testsuite/ld-i386/pr22001-1c.S: Likewise.
* ld/testsuite/ld-x86-64/pr22001-1a.c: Likewise.
* ld/testsuite/ld-x86-64/pr22001-1a.err: Likewise.
* ld/testsuite/ld-x86-64/pr22001-1b.c: Likewise.
* ld/testsuite/ld-x86-64/pr22001-1b.err: Likewise.
* ld/testsuite/ld-x86-64/pr22001-1c.c: Likewise.
* elf32-i386.c (elf_i386_check_relocs): Revert the last change.
Undefined symbols may not have a type.
* elf64-x86-64.c (elf_x86_64_check_relocs): Likewise.
-fPIC may be needed to compile PIE or PDE objects, not just shared
object.
bfd/
* elf64-x86-64.c (elf_x86_64_need_pic): Add an argument for
bfd_link_info. Report shared, PIE or PDE object based on
bfd_link_info.
(elf_x86_64_check_relocs): Update elf_x86_64_need_pic call.
(elf_x86_64_relocate_section): Likewise.
ld/
* testsuite/ld-x86-64/pie2.d: Updated.
* testsuite/ld-x86-64/pr19719.d: Likewise.
* testsuite/ld-x86-64/pr19807-2a.d: Likewise.
* testsuite/ld-x86-64/pr19969.d: Likewise.
Since PLT entry is needed only for function symbols, increment PLT count
only for function symbols.
* elf32-i386.c (elf_i386_check_relocs): Increment PLT count only
for function symbols.
* elf64-x86-64.c (elf_x86_64_check_relocs): Likewise.
When GNU_PROPERTY_NO_COPY_ON_PROTECTED is set, it indicates that there
are no copy relocations against protected data symbols. When linker
sees GNU_PROPERTY_NO_COPY_ON_PROTECTED on any input relocatable file,
it sets extern_protected_data to FALSE.
bfd/
* elf32-i386.c (elf_i386_link_setup_gnu_properties): Set
extern_protected_data to FALSE if GNU_PROPERTY_NO_COPY_ON_PROTECTED
is set on any input relocatable file.
* elf64-x86-64.c (elf_x86_64_link_setup_gnu_properties): Likewise.
ld/
* testsuite/ld-i386/i386.exp: Run protected7.
* testsuite/ld-i386/protected7.d: New file.
* testsuite/ld-i386/protected7.s: Likewise.
* testsuite/ld-x86-64/protected8.d: Likewise.
* testsuite/ld-x86-64/protected8.s: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run protected8.
..if they have dynamic relocs. An undefined symbol in a PIC object
that finds no definition ought to become dynamic in order to support
--allow-shlib-undefined, but there is nothing in the generic ELF
linker code to do this if the reference isn't via the GOT or PLT. (An
initialized function pointer is an example.) So it falls to backend
code to ensure the symbol is made dynamic.
PR 21988
* elf64-ppc.c (ensure_undef_dynamic): Rename from
ensure_undefweak_dynamic. Handle undefined too.
* elf32-ppc.c (ensure_undef_dynamic): Likewise.
* elf32-hppa.c (ensure_undef_dynamic): Likewise.
(allocate_dynrelocs): Discard undefined non-default visibility
relocs first. Make undefined syms dynamic. Tidy goto.
Skip IFUNC relocations in debug sections ignored by ld.so.
Fixes the following ld test failures on aarch64:
FAIL: Build libpr18808.so
FAIL: Build libpr18808.so_2
FAIL: Run pr18808
aborting at bfd/elfnn-aarch64.c:4986 in elf64_aarch64_final_link_relocate.
bfd/
PR ld/18808
* elfnn-aarch64.c (elfNN_aarch64_final_link_relocate): Skip IFUNC
relocations in debug sections, change abort to _bfd_error_handler.
Until all .eh_frame sections have been edited we don't know their
sizes. So it isn't possible to properly decide whether a non-empty
.eh_frame section follows a given section until editing is complete.
bfd/
PR 21441
* elf-eh-frame.c (_bfd_elf_discard_section_eh_frame): Don't add
alignment padding here.
* elflink.c (bfd_elf_discard_info): Add .eh_frame padding here
in a reverse pass over sections.
ld/
PR 21441
* testsuite/ld-x86-64/pr21038a.d: Adjust.
* testsuite/ld-x86-64/pr21038a-now.d: Adjust.
When synthesizing symbols for PLT entries, allocate space for symbol
names with @plt suffixes together with symbol table so that all memory
is returned when symbol table is freed.
PR binutils/21943
* elf32-i386.c (elf_i386_get_synthetic_symtab): Allocate space
for @plt suffixes first.
* elf64-x86-64.c (elf_x86_64_get_synthetic_symtab): Likewise.
PR 21916
* elf-attrs.c (_bfd_elf_parse_attributes): Complain about very
small section lengths.
* elf.c (_bfd_elf_setup_sections): Skip empty entries in the group
table.
(elfcore_grok_freebsd_prstatus): Add checks to make sure that
there is enough data present in the note.
PR 21884
* elf32-i386.c (elf_i386_link_setup_gnu_properties): If the dynobj
has not been set then use the bfd returned by
_bfd_elf_link_setup_gnu_properties. If that is null then search
through all the input bfds selecting the first normal, ELF format
one.
* elf64-x86-64.c (elf_x86_64_link_setup_gnu_properties): Likewise.
Instead of checking if a symbol is __tls_get_addr or ___tls_get_addr,
we check if there is a reference to __tls_get_addr or ___tls_get_addr
before starting relocation check.
* elf32-i386.c (elf_i386_link_hash_entry): Change tls_get_addr
to 1 bit.
(elf_i386_link_hash_newfunc): Initialize tls_get_addr to 0.
(elf_i386_check_tls_transition): Check tls_get_addr directly.
(elf_i386_convert_load_reloc): Update tls_get_addr check.
(elf_i386_link_check_relocs): New function.
(bfd_elf32_bfd_link_check_relocs): New.
* elf64-x86-64.c (elf_x86_64_link_hash_entry): Change tls_get_addr
to 1 bit.
(elf_x86_64_link_hash_newfunc): Initialize tls_get_addr to 0.
(elf_x86_64_check_tls_transition): Check tls_get_addr directly.
(elf_x86_64_convert_load_reloc): Update tls_get_addr check.
(elf_x86_64_link_check_relocs): New function.
(bfd_elf64_bfd_link_check_relocs): New.
(bfd_elf32_bfd_link_check_relocs): Likewise.
When --no-define-common is used to build shared library, treat common
symbol as undefined so that common symbols that are referenced from a
shared library to be assigned addresses only in the main program. This
eliminates the unused duplicate space in the shared library, and also
prevents any possible confusion over resolving to the wrong duplicate
when there are many dynamic modules with specialized search paths for
runtime symbol resolution.
--no-define-common is only allowed when building a shared library.
bfd/
PR ld/21903:
* elflink.c (elf_link_add_object_symbols): Treat common symbol
as undefined for --no-define-common.
include/
PR ld/21903:
* bfdlink.h (bfd_link_info): Add inhibit_common_definition.
ld/
PR ld/21903:
* ld.h (command_line): Remove inhibit_common_definition.
* ldgram.y: Replace command_line.inhibit_common_definition with
link_info.inhibit_common_definition.
* ldlang.c (lang_common): Likewise.
* lexsup.c (parse_args): Likewise.
* ldmain.c (main): Only allow --no-define-common with -shared.
* testsuite/ld-elf/pr21903.s: New file.
* testsuite/ld-elf/pr21903a.d: Likewise.
* testsuite/ld-elf/pr21903b.d: Likewise.
* testsuite/ld-elf/pr21903c.d: Likewise.
* testsuite/ld-elf/pr21903d.d: Likewise.
* testsuite/ld-elf/pr21903e.d: Likewise.
The base bfd_link_hash_table works fine here, the only thing to watch
out for is to only set elf_gp if the output is ELF.
bfd/
* elf32-hppa.c (elf32_hppa_set_gp): Don't require an
hppa_link_hash_table.
ld/
* testsuite/ld-unique/pr21529.d: Don't xfail hppa.
This fixes a segfault when trying to access the local_plt field in the
s390 specific elf data althoug the underlaying object is a generic elf
object.
This fixes the following testsuite failures:
< FAIL: plugin claimfile replace symbol with source
< FAIL: plugin claimfile resolve symbol with source
< FAIL: plugin claimfile replace file with source
< FAIL: plugin set symbol visibility with source
< FAIL: plugin ignore lib with source
< FAIL: plugin claimfile replace lib with source
< FAIL: plugin 2 with source lib
< FAIL: load plugin 2 with source
< FAIL: plugin 3 with source lib
< FAIL: load plugin 3 with source
bfd/ChangeLog:
2017-08-01 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* elf32-s390.c (elf_s390_finish_dynamic_sections): Skip if it
isn't the S/390 specific elf data.
* elf64-s390.c (elf_s390_finish_dynamic_sections): Likewise.
This makes ld warn about --plt-localentry if a version of glibc
without the necessary ld.so checks is detected, and revises the
documentation.
bfd/
* elf64-ppc.c (ppc64_elf_tls_setup): Warn on --plt-localentry
without ld.so checks.
gold/
* powerpc.cc (Target_powerpc::scan_relocs): Warn on --plt-localentry
without ld.so checks.
ld/
* ld.texinfo (plt-localentry): Revise.
The big comment in ppc64_elf_tls_setup says why. I've also added some
code to the bfd linker that catches the -lpthread -lc symbol
differences and disable generation of optimized call stubs even when
--plt-localentry is activated. Gold doesn't yet have that.
PR 21847
bfd/
* elf64-ppc.c (struct ppc_link_hash_entry): Add non_zero_localentry.
(ppc64_elf_merge_symbol): Set non_zero_localentry.
(is_elfv2_localentry0): Test non_zero_localentry.
(ppc64_elf_tls_setup): Default to --no-plt-localentry.
gold/
* powerpc.cc (Target_powerpc::scan_relocs): Default to
--no-plt-localentry.
ld/
* ld.texinfo (plt-localentry): Document.