The values are always members of the enum, except the two places -1 is assigned
only to playcate -Wuninitialized because gcc isn't or at least didn't used to
be smart enough to figure out its only used if it was set.
gas/ChangeLog:
2016-06-05 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-sh.c (parse_reg): Change type of mode argument to
sh_arg_type.
(get_operand): Adjust.
(insert): Change type of how to bfd_reloc_code_real_type.
(insert4): Likewise.
* config/tc-sh64.c (shmedia_get_operand): Adjust.
(shmedia_parse_reg): Change type of mode to shmedia_arg_type.
it points to the result of strchr on a const char *, so it aliases
something that is const. Further its only passed to a function that expects a
const char *, so there's no reason for it to not be const.
gas/ChangeLog:
2016-06-05 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-nds32.c (nds32_parse_option): Make the type of ptr_arg
const char *.
bfd/
* coff-z8k.c (extra_case): Fix range check for R_JR relocation.
ld/
* ld/testsuite/ld-z8k/0filler.s: New file.
* ld/testsuite/ld-z8k/branch-target.s: New file.
* ld/testsuite/ld-z8k/branch-target2.s: New file.
* ld/testsuite/ld-z8k/calr-back-8001.d: New file.
* ld/testsuite/ld-z8k/calr-back-8002.d: New file.
* ld/testsuite/ld-z8k/calr-back-fail-8001.d: New file.
* ld/testsuite/ld-z8k/calr-back-fail-8002.d: New file.
* ld/testsuite/ld-z8k/calr-forw-8001.d: New file.
* ld/testsuite/ld-z8k/calr-forw-8002.d: New file.
* ld/testsuite/ld-z8k/calr-forw-fail-8001.d: New file.
* ld/testsuite/ld-z8k/calr-forw-fail-8002.d: New file.
* ld/testsuite/ld-z8k/calr-opcode.s: New file.
* ld/testsuite/ld-z8k/dbjnz-forw-8001.d: New file.
* ld/testsuite/ld-z8k/dbjnz-forw-8002.d: New file.
* ld/testsuite/ld-z8k/dbjnz-forw-fail-8001.d: New file.
* ld/testsuite/ld-z8k/dbjnz-forw-fail-8002.d: New file.
* ld/testsuite/ld-z8k/dbjnz-opcode.s: New file.
* ld/testsuite/ld-z8k/djnz-back-8001.d: New file.
* ld/testsuite/ld-z8k/djnz-back-8002.d: New file.
* ld/testsuite/ld-z8k/djnz-back-fail-8001.d: New file.
* ld/testsuite/ld-z8k/djnz-back-fail-8002.d: New file.
* ld/testsuite/ld-z8k/djnz-forw-8001.d: New file.
* ld/testsuite/ld-z8k/djnz-forw-8002.d: New file.
* ld/testsuite/ld-z8k/djnz-forw-fail-8001.d: New file.
* ld/testsuite/ld-z8k/djnz-forw-fail-8002.d: New file.
* ld/testsuite/ld-z8k/djnz-opcode.s: New file.
* ld/testsuite/ld-z8k/filler.s: New file.
* ld/testsuite/ld-z8k/jr-back-8001.d: New file.
* ld/testsuite/ld-z8k/jr-back-8002.d: New file.
* ld/testsuite/ld-z8k/jr-back-fail-8001.d: New file.
* ld/testsuite/ld-z8k/jr-back-fail-8002.d: New file.
* ld/testsuite/ld-z8k/jr-forw-8001.d: New file.
* ld/testsuite/ld-z8k/jr-forw-8002.d: New file.
* ld/testsuite/ld-z8k/jr-forw-fail-8001.d: New file.
* ld/testsuite/ld-z8k/jr-forw-fail-8002.d: New file.
* ld/testsuite/ld-z8k/jr-opcode.s: New file.
* ld/testsuite/ld-z8k/ldr-back-8001.d: New file.
* ld/testsuite/ld-z8k/ldr-back-8002.d: New file.
* ld/testsuite/ld-z8k/ldr-back-fail-8001.d: New file.
* ld/testsuite/ld-z8k/ldr-back-fail-8002.d: New file.
* ld/testsuite/ld-z8k/ldr-forw-8001.d: New file.
* ld/testsuite/ld-z8k/ldr-forw-8002.d: New file.
* ld/testsuite/ld-z8k/ldr-forw-fail-8001.d: New file.
* ld/testsuite/ld-z8k/ldr-forw-fail-8002.d: New file.
* ld/testsuite/ld-z8k/ldr-opcode.s: New file.
* ld/testsuite/ld-z8k/ldrb-forw-8001.d: New file.
* ld/testsuite/ld-z8k/ldrb-forw-8002.d: New file.
* ld/testsuite/ld-z8k/ldrb-forw-fail-8001.d: New file.
* ld/testsuite/ld-z8k/ldrb-forw-fail-8002.d: New file.
* ld/testsuite/ld-z8k/ldrb-opcode.s: New file.
* ld/testsuite/ld-z8k/ldrb-opcode2.s: New file.
* ld/testsuite/ld-z8k/other-file.s: New file.
* ld/testsuite/ld-z8k/reloc.dd: New file.
* ld/testsuite/ld-z8k/reloc.ld: New file.
* ld/testsuite/ld-z8k/relocseg.dd: New file.
* ld/testsuite/ld-z8k/relocseg.ld: New file.
* ld/testsuite/ld-z8k/relocseg1.dd: New file.
* ld/testsuite/ld-z8k/test-ld.sh: New file.
* ld/testsuite/ld-z8k/this-file.s: New file.
* ld/testsuite/ld-z8k/z8k.exp: New file.
AMD64 spec and Intel64 spec differ in indirect branches in 64-bit mode.
AMD64 supports indirect branches with 16-bit address via the data size
prefix while the data size prefix is ignored by Intel64.
gas/
PR binutis/18386
* testsuite/gas/i386/i386.exp: Run x86-64-branch-4.
* testsuite/gas/i386/x86-64-branch.d: Updated.
* testsuite/gas/i386/ilp32/x86-64-branch.d: Likewise.
* testsuite/gas/i386/x86-64-branch-4.l: New file.
* testsuite/gas/i386/x86-64-branch-4.s: Likewise.
opcodes/
PR binutis/18386
* i386-dis.c (indirEv): Replace stack_v_mode with indir_v_mode.
(indir_v_mode): New.
Add comments for '&'.
(reg_table): Replace "{T|}" with "{&|}" on call and jmp.
(putop): Handle '&'.
(intel_operand_size): Handle indir_v_mode.
(OP_E_register): Likewise.
* i386-opc.tbl: Mark 64-bit indirect call/jmp as AMD64. Add
64-bit indirect call/jmp for AMD64.
* i386-tbl.h: Regenerated
gdb/ChangeLog:
2016-06-02 Jon Turney <jon.turney@dronecode.org.uk>
* windows-nat.c (handle_output_debug_string): Return type of
gdb_signal_from_host() is gdb_signal, not an int.
(windows_get_exec_module_filename): Add pointer casts for C++.
gdb/gdbserver/ChangeLog:
2016-06-02 Jon Turney <jon.turney@dronecode.org.uk>
* win32-low.c (win32_create_inferior): Add pointer casts for C++.
This fixes PR python/18984.
The bug is that gdbpy_solib_name uses GDB_PY_LL_ARG, whereas it should
use GDB_PY_LLU_ARG to avoid overflow.
Built and tested on x86-64 Fedora 23.
2016-06-02 Tom Tromey <tom@tromey.com>
PR python/18984:
* python/python.c (gdbpy_solib_name): Use GDB_PY_LLU_ARG.
2016-06-02 Tom Tromey <tom@tromey.com>
PR python/18984:
* gdb.python/py-shared.exp: Add solib_name test.
gas * config/tc-arc.c (parse_opcode_flags): New function.
(find_opcode_match): Move flag parsing code out to new function.
Ignore operands marked IGNORE.
(build_fake_opcode_hash_entry): New function.
(find_special_case_long_opcode): New function.
(find_special_case): Lookup long opcodes.
* testsuite/gas/arc/nps400-7.d: New file.
* testsuite/gas/arc/nps400-7.s: New file.
include * opcode/arc.h (MAX_INSN_ARGS): Increase to 16.
(struct arc_long_opcode): New structure.
(arc_long_opcodes): Declare.
(arc_num_long_opcodes): Declare.
opcodes * arc-dis.c (struct arc_operand_iterator): New structure.
(find_format_from_table): All the old content from find_format,
with some minor adjustments, and parameter renaming.
(find_format_long_instructions): New function.
(find_format): Rewritten.
(arc_insn_length): Add LSB parameter.
(extract_operand_value): New function.
(operand_iterator_next): New function.
(print_insn_arc): Use new functions to find opcode, and iterator
over operands.
* arc-opc.c (insert_nps_3bit_dst_short): New function.
(extract_nps_3bit_dst_short): New function.
(insert_nps_3bit_src2_short): New function.
(extract_nps_3bit_src2_short): New function.
(insert_nps_bitop1_size): New function.
(extract_nps_bitop1_size): New function.
(insert_nps_bitop2_size): New function.
(extract_nps_bitop2_size): New function.
(insert_nps_bitop_mod4_msb): New function.
(extract_nps_bitop_mod4_msb): New function.
(insert_nps_bitop_mod4_lsb): New function.
(extract_nps_bitop_mod4_lsb): New function.
(insert_nps_bitop_dst_pos3_pos4): New function.
(extract_nps_bitop_dst_pos3_pos4): New function.
(insert_nps_bitop_ins_ext): New function.
(extract_nps_bitop_ins_ext): New function.
(arc_operands): Add new operands.
(arc_long_opcodes): New global array.
(arc_num_long_opcodes): New global.
* arc-nps400-tbl.h: Add comments referencing arc_long_opcodes.
This reverts the pr16467 change, which was incorrect due to faulty
analysis of the pr16467 testcase. The failure was not due to a
mismatch in symbol type (ifunc/non-ifunc) but due to a symbol loop
being set up.
See https://sourceware.org/ml/binutils/2016-06/msg00013.html for some
rambling on versioned symbols and ELF shared library symbol overriding
that explain this patch.
bfd/
PR ld/20159
PR ld/16467
* elflink.c (_bfd_elf_merge_symbol): Revert PR16467 change.
(_bfd_elf_add_default_symbol): Don't indirect to/from defined
symbol given a version by a script different to the version
of the symbol being added.
(elf_link_add_object_symbols): Use _bfd_elf_strtab_save and
_bfd_elf_strtab_restore. Don't fudge dynstr references.
* elf-strtab.c (_bfd_elf_strtab_restore_size): Delete.
(struct strtab_save): New.
(_bfd_elf_strtab_save, _bfd_elf_strtab_restore): New functions.
* elf-bfd.h (_bfd_elf_strtab_restore_size): Delete.
(_bfd_elf_strtab_save, _bfd_elf_strtab_restore): Declare.
This seems a little easier to understand than using a sentinal, and will
hopefully let the compiler optimize the loop better. It also has the effect
that we stop initializing a field of the sentinal that is an enum with zero.
gas/ChangeLog:
2016-06-01 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-avr.c (avr_parse_cons_expression): Replace iteration to
sentinal with iteration to array size.
I think this is the more typical way to do this. Its also slightly shorter and
less repeditive.
gas/ChangeLog:
2016-06-01 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/xtensa-relax.h: Move typedefs of enums to the enums
definition.
... and fix Ctrl-C races.
The current remote-fileio.c SIGINT/EINTR code can lose Ctrl-C --
there's a period where SIG_IGN is installed as signal handler, for
example.
Since:
- remote.c no longer installs a custom SIGINT handler;
- The current remote-fileio.c SIGINT handler is basically the same as
the default SIGINT handler (event-top.c:handle_sigint), in
principle, except that instead of setting the quit flag, it sets a
separate flag.
I think we should be able to completely remove the remote-fileio.c
SIGINT handler, and centralize on the quit flag, thus fixing the
Ctrl-C race.
gdb/ChangeLog:
yyyy-mm-dd Pedro Alves <palves@redhat.com>
* remote-fileio.c (remote_fio_ctrl_c_flag, remote_fio_sa)
(remote_fio_osa)
(remote_fio_ofunc, remote_fileio_sig_init, remote_fileio_sig_set)
(remote_fileio_sig_exit, remote_fileio_ctrl_c_signal_handler):
Delete.
(remote_fileio_o_quit_handler): New global.
(remote_fileio_quit_handler): New function.
(remote_fileio_reply): Check the quit flag instead of the custom
'remote_fio_ctrl_c_flag' flag. Restore the quit handler instead
of changing the SIGINT handler.
(do_remote_fileio_request): Override the quit handler instead of
changing the SIGINT handler.
gas * testsuite/gas/arc/nps-400-1.s: Add rflt variants with
operands of types a,b,u6, 0,b,u6, and 0,b,limm.
* testsuite/gas/arc/nps-400-1.d: Likewise.
opcodes * arc-nps400-tbl.h: Add operands a,b,u6, 0,b,u6, and
0,b,limm to the rflt instruction.
Patch 7eb895307f Skip unwritable frames in command "finish"
skips non-writable frames in addition to tailcall frames.
If skip_tailcall_frames already returns NULL, skip_unwritable_frames
will be called with a NULL frame and crash in get_frame_arch. This is
caught by gdb.btrace/tailcall-only.exp.
Further, if we ever end up with a mixture of tailcall and non-writable
frames, we may not skip all of them, as intended.
Loop over skip_tailcall_frames and skip_unwritable_frames as long as at least
one of them makes progress.
gdb/
* infcmd.c (skip_finish_frames): New.
(finish_command): Call skip_finish_frames.
As reported in PR 19998, after type ctrl-c, GDB hang there and does
not send interrupt. It causes a fail in gdb.base/interrupt.exp.
All targets support remote fileio should be affected.
When we type ctrc-c, SIGINT is handled by remote_fileio_sig_set,
as shown below,
#0 remote_fileio_sig_set (sigint_func=0x4495d0 <remote_fileio_ctrl_c_signal_handler(int)>) at /home/yao/SourceCode/gnu/gdb/git/gdb/remote-fileio.c:325
#1 0x00000000004495de in remote_fileio_ctrl_c_signal_handler (signo=<optimised out>) at /home/yao/SourceCode/gnu/gdb/git/gdb/remote-fileio.c:349
#2 <signal handler called>
#3 0x00007ffff647ed83 in __select_nocancel () at ../sysdeps/unix/syscall-template.S:81
#4 0x00000000005530ce in interruptible_select (n=10, readfds=readfds@entry=0x7fffffffd730, writefds=writefds@entry=0x0, exceptfds=exceptfds@entry=0x0,
timeout=timeout@entry=0x0) at /home/yao/SourceCode/gnu/gdb/git/gdb/event-top.c:1017
#5 0x000000000061ab20 in stdio_file_read (file=<optimised out>, buf=0x12d02e0 "\n\022-\001", length_buf=16383)
at /home/yao/SourceCode/gnu/gdb/git/gdb/ui-file.c:577
#6 0x000000000044a4dc in remote_fileio_func_read (buf=0x12c0360 "") at /home/yao/SourceCode/gnu/gdb/git/gdb/remote-fileio.c:583
#7 0x0000000000449598 in do_remote_fileio_request (uiout=<optimised out>, buf_arg=buf_arg@entry=0x12c0340)
at /home/yao/SourceCode/gnu/gdb/git/gdb/remote-fileio.c:1179
we don't set quit_serial_event,
do
{
res = gdb_select (n, readfds, writefds, exceptfds, timeout);
}
while (res == -1 && errno == EINTR);
if (res == 1 && FD_ISSET (fd, readfds))
{
errno = EINTR;
return -1;
}
return res;
we can't go out of the loop above, and that is why GDB can't send
interrupt.
Recently, we stop throwing exception from SIGINT handler
(remote_fileio_ctrl_c_signal_handler)
https://sourceware.org/ml/gdb-patches/2016-03/msg00372.html, which
is correct, because gdb_select is interruptible. However, in the
same patch series, we add interruptible_select later as a wrapper
to gdb_select, https://sourceware.org/ml/gdb-patches/2016-03/msg00375.html
and it is not interruptible (because of the loop in it) unless
select/poll-able file descriptors are marked.
This fix in this patch is to call quit_serial_event_set, so that we can
go out of the loop above, return -1 and set errno to EINTR.
2016-06-01 Yao Qi <yao.qi@linaro.org>
PR remote/19998
* remote-fileio.c (remote_fileio_ctrl_c_signal_handler): Call
quit_serial_event_set.
Shifting into the sign bit of a 32 bit int and then converting to a unsigned
type is less straight forward than just shifting an unsigned value.
opcodes/ChangeLog:
2016-05-31 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* sh-opc.h (ARCH_SH_HAS_DSP): Make the shifted value an unsigned
constant.
https://sourceware.org/bugzilla/show_bug.cgi?id=19893
I've traced the main source of the problem to pieced_value_funcs.coerce_ref not being
implemented. Since gdb always assumes references are implemented as pointers, this
causes it to think that it's dealing with a NULL pointer, thus breaking any operations
involving synthetic references.
What I did here was implementing pieced_value_funcs.coerce_ref using some of the synthetic
pointer handling code from indirect_pieced_value, as Pedro suggested. I also made a few
adjustments to the reference printing code so that it correctly shows either the address
of the referenced value or (if it's non-addressable) the "<synthetic pointer>" string.
I also wrote some unit tests based on Dwarf::assemble; these took a while to make
because in most cases I needed a synthetic reference to a physical variable. Additionally,
I started working on a unit test for classes that have a vtable, but ran into a few issues
so that'll probably go in a future patch. One thing that should definitely be fixed is that
proc function_range (called for MACRO_AT_func) will always try to compile/link using gcc
with the default options instead of g++, thus breaking C++ compilations that require e.g. libstdc++.
gdb/ChangeLog:
* dwarf2loc.c (coerce_pieced_ref, indirect_synthetic_pointer,
fetch_const_value_from_synthetic_pointer): New functions.
(indirect_pieced_value): Move lower half to indirect_synthetic_pointer.
(pieced_value_funcs): Implement coerce_ref.
* valops.c (value_addr): Call coerce_ref for synthetic references.
* valprint.c (valprint_check_validity): Return true for synthetic
references. Also, don't show "<synthetic pointer>" if they reference
addressable values.
(generic_val_print_ref): Handle synthetic references. Also move some
code to print_ref_address.
(print_ref_address, get_value_addr_contents): New functions.
gdb/testsuite/ChangeLog:
* gdb.dwarf2/implref.exp: Rename to...
* gdb.dwarf2/implref-const.exp: ...this. Also add more test statements.
* gdb.dwarf2/implref-array.c: New file.
* gdb.dwarf2/implref-array.exp: Likewise.
* gdb.dwarf2/implref-global.c: Likewise.
* gdb.dwarf2/implref-global.exp: Likewise.
* gdb.dwarf2/implref-struct.c: Likewise.
* gdb.dwarf2/implref-struct.exp: Likewise.
This patch adds tests for emit operations with 64 bit values. It takes
special care to avoid mistakes that one could make on a 32bit architecture
using 64bit values.
gdb/testsuite/ChangeLog:
* gdb.trace/trace-condition.exp: Add 64bit tests.
This patch add variable length tests for emit_ref by reading the variable
passed as argument of 8 to 64 bit.
gdb/testsuite/ChangeLog:
* gdb.trace/trace-condition.c (marker): Adapt signature to 8 to 64
bits types.
(main): Adapt to 8 to 64 bits types.
* gdb.trace/trace-condition.exp: Add new tests.
This patch moves conditional tests that were done in ftrace.exp to
trace-condition.exp.
Note that emit_ref is now tested by the anarg local variable there is no
need to test the register directly.
All emit calls have been tested using asserts before / after the move, to
ensure that the tests cover the same functions.
Note that these function were not covered before and are still not:
emit_gt_goto, emit_lt_goto, emit_pop, emit_unsigned_less.
gdb/testsuite/ChangeLog:
* gdb.trace/ftrace.exp (test_ftrace_condition): Remove.
Move condition tests...
* gdb.trace/trace-condition.exp: Here.
