We should set BFD_DECOMPRESS to decompress debug sections when reading in
DWARF debug sections.
bfd/
PR binutils/19523
* dwarf2.c (_bfd_dwarf2_slurp_debug_info): Set BFD_DECOMPRESS to
decompress debug sections.
binutils/
PR binutils/19523
* Makefile.am (check-DEJAGNU): Pass CC and CC_FOR_BUILD to
runtest.
* Makefile.in: Regenerated.
* testsuite/binutils-all/compress.exp (test_gnu_debuglink): New
proc.
Run test_gnu_debuglink for native ELF build.
Just mask higher bits off, which returns the same set of 3-bit register
encodings of { 0, 1, 2, 3, 4, 5, 6, 7 } for the allowed 5-bit encodings
of { 16, 17, 2, 3, 4, 5, 6, 7 }. Input has already been validated with
OP16_VALID_REG.
bfd/
* elfxx-mips.c (BZ16_REG_FIELD): Simplify calculation.
PR ld/19455
* elf32-arm.c (elf32_arm_create_dynamic_sections): Set the ELF
class of the linker stub bfd.
(elf32_arm_check_relocs): Skip check for pic format after
processing a vxWorks R_ARM_ABS12 reloc.
* elflink.c (bfd_elf_final_link): Check for ELFCLASSNONE when
reporting a class mismatch.
* testsuite/ld-arm/vxworks1-lib.dd: Update for current
disassmebler output.
* testsuite/ld-arm/vxworks1-lib.rd: Likewise.
* testsuite/ld-arm/vxworks1.dd: Likewise.
* testsuite/ld-arm/vxworks1.rd: Likewise.
* testsuite/ld-arm/vxworks1.ld: Set the output format.
As defined at AArch64 ELF Specification (4.6.7 Call and Jump
relocations), symbol with type of non STT_FUNC but in different input
section with relocation place should insert long branch veneer also.
Meanwhile the current long branch veneer infrastructure havn't considered
the situation where the branch destination is "sym_value + rela->addend".
This was OK because we only insert veneer for long call destination is
STT_FUNC symbol for which the addend is always zero. But as we relax the
support to other situations by this patch, we need to handle addend be
non-zero value. For example, for static function, relocation against
"local symbol" are turned into relocation against "section symbol + offset"
where there is a valid addend.
bfd/
* elfnn-aarch64.c (aarch64_type_of_stub): Allow insert long branch
veneer for sym_sec != input_sec.
(elfNN_aarch64_size_stub): Support STT_SECTION symbol.
(elfNN_aarch64_final_link_relocate): Take rela addend into account when
calculation destination.
ld/
* testsuite/ld-aarch64/farcall-section.d: Delete.
* testsuite/ld-aarch64/farcall-section.s: Delete.
* testsuite/ld-aarch64/farcall-b-section.d: New expectation file.
* testsuite/ld-aarch64/farcall-bl-section.d: Likewise.
* testsuite/ld-aarch64/farcall-b-section.s: New testcase.
* testsuite/ld-aarch64/farcall-bl-section.s: Likewise.
* testsuite/ld-aarch64/aarch64-elf.exp: Likewise.
Since it will sometime have more than just prpsinfo. Also,
elf32-ppc.c needlessly includes this header.
* elf-linux-core.h: Rename from elf-linux-psinfo.h.
* elf.c: Adjust #include.
* elf32-ppc.c: Don't #include elf-linux-psinfo.h
* Makefile.am (SOURCE_HFILES): Update.
* Makefile.in: Regenerate.
* po/SRC-PORFILES.in: Regenerate.
Corefile code should be moved after running config.bfd, because it
uses want64.
* configure.ac: Move corefile selection later in file. Move
tdefaults code immediately after other target vector code.
* configure: Regenerate.
bfd/ChangeLog:
* elf32-arm.c ((elf32_arm_special_sections): Remove catch of noread
section using '.text.noread' pattern.
gas/ChangeLog:
* config/obj-elf.c (obj_elf_change_section) : Allow arm section with
SHF_ARM_NOREAD section flag.
* config/tc-arm.h (md_elf_section_letter) : Implement this hook to
handle letter 'y'.
(arm_elf_section_letter) : Declare it.
* config/tc-arm.c (arm_elf_section_letter): Handle letter 'y' to set
SHF_ARM_NOREAD section flag.
* doc/c-arm.texi (ARM section attribute 'y'): Document it.
gas/testsuite/ChangeLog:
* gas/arm/section-execute-only.s: New test case.
* gas/arm/section-execute-only.d: Expected output.
ld/testsuite/ChangeLog:
* ld-arm/thumb1-noread-not-present-mixing-two-section.s: Add 'y'
attribute usage.
* ld-arm/thumb1-noread-present-one-section.s: Likewise.
* ld-arm/thumb1-noread-present-two-section.s: Likewise.
* ld-arm/thumb1-input-section-flag-match.s: Likewise.
binutils/ChangeLog:
* readelf.c (get_elf_section_flags): Display y letter for section
with SHF_ARM_NOREAD section flag in readelf section output.
(process_section_headers): Add y letter in readelf section output
key mapping for ARM architecture.
bfd/ChangeLog:
* arc-plt.def: New file.
* arc-plt.h: Likewise.
* elf32-arc.c (elf_arc_abs_plt0_entry, elf_arc_abs_pltn_entry,
elf_arcV2_abs_plt0_entry, elf_arcV2_abs_pltn_entry,
elf_arc_pic_plt0_entry, elf_arc_pic_pltn_entry,
elf_arcV2_pic_plt0_entry, elf_arcV2_pic_pltn_entry): Remove.
(name_for_global_symbol): Added.
(ADD_RELA): Helper to create dynamic relocs.
(new_got_entry_to_list): Create a new got entry in linked list.
(symbol_has_entry_of_type): Search for specific type of entry in
list.
(is_reloc_for_GOT): return FALSE for any TLS related relocs.
(is_reloc_for_TLS, arc_elf_set_private_flags)
(arc_elf_print_private_bfd_data, arc_elf_copy_private_bfd_data)
(arc_elf_merge_private_bfd_data): New functions.
(debug_arc_reloc): Cleaned debug info printing.
(PDATA reloc): Changed not to perform address alignment.
(reverse_me): Added. Fix for ARC_32 relocs.
(arc_do_relocation): Return bfd_reloc_of when no relocation should
occur.
(arc_get_local_got_ents): Renamed from arc_get_local_got_offsets.
Changed function to access an array of list of GOT entries instead
of just an array of offsets.
(elf_arc_relocate_section): Added support for PIC and TLS related relocations.
(elf_arc_check_relocs): Likewise.
(elf_arc_adjust_dynamic_symbol, elf_arc_finish_dynamic_symbol,
(elf_arc_finish_dynamic_sections): Likewise
(arc_create_dynamic_sections): Modified conditions to create
dynamic sections.
(ADD_SYMBOL_REF_SEC_AND_RELOC): New macro.
(plt_do_relocs_for_symbol, relocate_plt_for_symbol)
(relocate_plt_for_entry): Changed to support new way to define PLT
related code.
(add_symbol_to_plt): Likewise.
(arc_elf_link_hash_table_create): New function.
include/ChangeLog:
* elf/arc-reloc.def (ARC_32, ARC_GOTPC, ARC_TLS_GD_GOT)
(ARC_TLS_IE_GOT, ARC_TLS_DTPOFF, ARC_TLS_DTPOFF_S9, ARC_TLS_LE_S9)
(ARC_TLS_LE_32): Fixed formula.
(ARC_TLS_GD_LD): Use new special function.
* opcode/arc-func.h: Changed all the replacement
functions to clear the patching bits before doing an or it with the value
argument.
PR ld/19440
inc * coff/internal.h (internal_syment): Use int to hold section
number.
(N_UNDEF): Cast to int not short.
(N_ABS): Likewise.
(N_DEBUG): Likewise.
(N_TV): Likewise.
(P_TV): Likewise.
bfd PR ld/19440
* coff-rs6000.c (_bfd_xcoff_swap_sym_in): Sign extend external
section number into internal section number.
* coff64-rs6000.c (_bfd_xcoff64_swap_sym_in): Likewise.
* coffswap.h (coff_swap_sym_in): Likewise.
* peXXigen.c (_bfd_XXi_swap_sym_in): Likewise.
* coffcode.h (_coff_bigobj_swap_sym_in): Make sure that internal
section number field is big enough to hold the external value.
bfd * elf32-arm.c (elf32_arm_fix_exidx_coverage): Insert cantunwind when
address in first unwind entry does not match start of section.
tests * ld-arm/arm-elf.exp: New test.
* ld-arm/unwind-mix.d: New file.
* ld-arm/unwind-mix1.s: New file.
* ld-arm/unwind-mix2.s: New file.
The convention within for relocation names is that they start with the
string "R_", however, this is not so for ARC for the display names of
relocations, however, internally, the names for the relocations types do
have the 'R_' prefix. I suspect that the missing 'R_' on the output
strings was an oversight, as I can't see any comment to the contrary.
To bring ARC into line with other targets, this commit adds the 'R_'
prefix to the output strings used for relocation names, and updates all
of the assembler tests where this was exposed.
bfd/ChangeLog:
* elf32-arc.c (reloc_type_to_name): Change ARC_RELOC_HOWTO to
place 'R_' before the reloc name returned.
(elf_arc_howto_table): Change ARC_RELOC_HOWTO to place 'R_' before
the relocation string.
gas/ChangeLog:
* testsuite/gas/arc/adc.d: Add 'R_' prefix to relocation names.
* testsuite/gas/arc/add.d: Likewise.
* testsuite/gas/arc/and.d: Likewise.
* testsuite/gas/arc/asl.d: Likewise.
* testsuite/gas/arc/asr.d: Likewise.
* testsuite/gas/arc/bic.d: Likewise.
* testsuite/gas/arc/extb.d: Likewise.
* testsuite/gas/arc/extw.d: Likewise.
* testsuite/gas/arc/j.d: Likewise.
* testsuite/gas/arc/jl.d: Likewise.
* testsuite/gas/arc/ld2.d: Likewise.
* testsuite/gas/arc/lsr.d: Likewise.
* testsuite/gas/arc/mov.d: Likewise.
* testsuite/gas/arc/or.d: Likewise.
* testsuite/gas/arc/pcl-relocs.d: Likewise.
* testsuite/gas/arc/pcrel-relocs.d: Likewise.
* testsuite/gas/arc/pic-relocs.d: Likewise.
* testsuite/gas/arc/plt-relocs.d: Likewise.
* testsuite/gas/arc/rlc.d: Likewise.
* testsuite/gas/arc/ror.d: Likewise.
* testsuite/gas/arc/rrc.d: Likewise.
* testsuite/gas/arc/sbc.d: Likewise.
* testsuite/gas/arc/sda-relocs.d: Likewise.
* testsuite/gas/arc/sda-relocs2.d: Likewise.
* testsuite/gas/arc/sexb.d: Likewise.
* testsuite/gas/arc/sexw.d: Likewise.
* testsuite/gas/arc/st.d: Likewise.
* testsuite/gas/arc/sub.d: Likewise.
* testsuite/gas/arc/tls-relocs.d: Likewise.
* testsuite/gas/arc/xor.d: Likewise.
Factor out the parts of `_bfd_mips_elf_merge_private_bfd_data'
responsible for ABI flag merging to `mips_elf_merge_obj_abiflags'. No
functional change.
bfd/
* elfxx-mips.c (mips_elf_merge_obj_abiflags): New function,
factored out from...
(_bfd_mips_elf_merge_private_bfd_data): ... here.
We have a problem in that in making compatibility checks while merging
private BFD data on the MIPS target we give priority to the attribute
check, which may fail and cause the function to abort early on. The
problem with this is the ABI compatibility aspect recorded in the
attributes is relatively minor compared to aspects recorded in the ELF
file header. However the premature exit causes any more important
compatibility aspect violated to be masked and not reported to the user
once a problem with attributes has been noticed.
So move the attribute check after the ELF file header flag check in
`_bfd_mips_elf_merge_private_bfd_data', and do not return prematurely
there. Take advantage of the resulting grouping of ELF file header
handling together and remove the premature success return point for the
first input object being handled, letting the code later on figure out
output ABI flags even for this object.
Update LD test cases according to messages from ELF file header checks
now preceding ones from attribute checks.
bfd/
* elfxx-mips.c (_bfd_mips_elf_merge_private_bfd_data): Move
attribute check after ELF file header flag check.
ld/
* testsuite/ld-mips-elf/attr-gnu-4-14.d: Update the order of
messages expected according to MIPS BFD private data merge
changes.
* testsuite/ld-mips-elf/attr-gnu-4-24.d: Likewise.
* testsuite/ld-mips-elf/attr-gnu-4-34.d: Likewise.
* testsuite/ld-mips-elf/attr-gnu-4-41.d: Likewise.
* testsuite/ld-mips-elf/attr-gnu-4-42.d: Likewise.
* testsuite/ld-mips-elf/attr-gnu-4-43.d: Likewise.
* testsuite/ld-mips-elf/attr-gnu-4-45.d: Likewise.
* testsuite/ld-mips-elf/attr-gnu-4-46.d: Likewise.
* testsuite/ld-mips-elf/attr-gnu-4-47.d: Likewise.
* testsuite/ld-mips-elf/attr-gnu-4-48.d: Likewise.
* testsuite/ld-mips-elf/attr-gnu-4-49.d: Likewise.
* testsuite/ld-mips-elf/attr-gnu-4-54.d: Likewise.
* testsuite/ld-mips-elf/attr-gnu-4-64.d: Likewise.
* testsuite/ld-mips-elf/attr-gnu-4-74.d: Likewise.
Fix the issue of any failure from `_bfd_elf_merge_object_attributes' not
being propagated by `mips_elf_merge_obj_attributes'.
bfd/
* elfxx-mips.c (mips_elf_merge_obj_attributes): Propagate the
return status from `_bfd_elf_merge_object_attributes'.
Factor out the parts of `_bfd_mips_elf_merge_private_bfd_data'
responsible for ELF file header flag compatibility checks to
`mips_elf_merge_obj_e_flags'. As a side effect remove a premature
return point from `_bfd_mips_elf_merge_private_bfd_data'. No functional
change otherwise.
bfd/
* elfxx-mips.c (mips_elf_merge_obj_e_flags): New function,
factored out from...
(_bfd_mips_elf_merge_private_bfd_data): ... here.
Fold the handling of input MIPS ABI flags in private BFD data merging
together, moving the attribute check afterwards, and consequently making
input vs output compatibility checks only start once all input ABI flag
data has been gathered, checked for inconsistencies and put in order.
Consequently also address the issue of input ABI flag inconsistencies
being masked by a failing attribute check, which currently makes
`_bfd_mips_elf_merge_private_bfd_data' exit prematurely and therefore
prevent input ABI flag inconsistencies from being reported. Such
inconsistencies need to be reported as they may be the very cause of an
attribute check failure.
bfd/
* elfxx-mips.c (_bfd_mips_elf_merge_private_bfd_data): Fold the
handling of input MIPS ABI flags together.
We currently special-case the handling of attribute checks on input
objects and make them even before we check a given input object actually
contains any sections. This does not add value as empty objects do not
cause a compatibility concern and we already make this observation for
other properties such as ELF file header flags. Moreover the attributes
themselves are stored in a `.gnu.attributes' section so the absence of
any section (except from a few special cases) implies there have been no
attributes provided either. Therefore it is safe to move the attribute
checks later on, after the null-section check has been made.
bfd/
* elfxx-mips.c (_bfd_mips_elf_merge_private_bfd_data): Suppress
attribute checks for null input.
Use local pointers to target data to reduce the amount of indirection
and improve the readability of `_bfd_mips_elf_merge_private_bfd_data'.
bfd/
* elfxx-mips.c (_bfd_mips_elf_merge_private_bfd_data): Use local
pointers to target data.
Correct a warning produced on any FP ABI mismatch observed. Unlike the
other settings, which in the presence of `.MIPS.abiflags' are duplicated
in the `e_flags' member of the ELF file header, information on the FP
ABI in use is duplicated in `.gnu.attributes' rather than in the former
place. Update the warning message accordingly.
bfd/
* elfxx-mips.c (_bfd_mips_elf_merge_private_bfd_data): Correct
an FP ABI warning.
2015-12-24 Thomas Preud'homme <thomas.preudhomme@arm.com>
bfd/
(tag_cpu_arch_combine): Adjust comment in v4t_plus_v6_m with regards
to merging with ARMv8-M Baseline.
binutils/
* readelf.c (arm_attr_tag_CPU_arch): Add ARMv8-M Baseline Tag_CPU_arch
value.
gas/
* config/tc-arm.c (arm_ext_v6t2_v8m): New feature for instructions
shared between ARMv6T2 and ARMv8-M.
(move_or_literal_pool): Check mov.w/mvn and movw availability against
arm_ext_v6t2 and arm_ext_v6t2_v8m respectively instead of checking
arm_arch_t2.
(do_t_branch): Error out for wide conditional branch instructions if
targetting ARMv8-M Baseline.
(non_v6t2_wide_only_insn): Add the logic for new wide-only instructions
in ARMv8-M Baseline.
(wide_insn_ok): New function.
(md_assemble): Use wide_insn_ok instead of non_v6t2_wide_only_insn and
adapt error message for unsupported wide instruction to ARMv8-M
Baseline.
(insns): Reorganize instructions shared by ARMv8-M Baseline and
ARMv6t2 architecture.
(arm_cpus): Set feature bit ARM_EXT2_V6T2_V8M for marvell-pj4 and
marvell-whitney cores.
(arm_archs): Define armv8-m.base architecture.
(cpu_arch_ver): Define ARM_ARCH_V8M_BASE architecture version.
(aeabi_set_public_attributes): Add logic to set Tag_CPU_arch to 17 for
ARMv8-M Mainline. Set Tag_DIV_use for ARMv8-M Baseline as well.
gas/testsuite/
* gas/arm/archv8m-base.d: New file.
* gas/arm/attr-march-armv8m.base.d: Likewise.
* gas/arm/armv8m.base-idiv.d: Likewise.
* gas/arm/any-armv8m.d: Adapt to deal with ARMv8-M Baseline.
include/elf/
* arm.h (TAG_CPU_ARCH_V8M_BASE): Declare.
include/opcode/
* arm.h (ARM_EXT2_V6T2_V8M): New extension bit.
(ARM_AEXT2_V8A): New architecture extension bitfield.
(ARM_AEXT2_V8_1A): Use ARM_AEXT2_V8A instead of ARM_EXT2_ATOMICS.
(ARM_AEXT_V8M_BASE): New architecture extension bitfield.
(ARM_AEXT2_V8M): Add extension bit ARM_EXT2_V6T2_V8M.
(ARM_ARCH_V6T2): Use ARM_EXT2_V6T2_V8M for the second extension
bitfield.
(ARM_ARCH_V6KT2): Likewise.
(ARM_ARCH_V6ZT2): Likewise.
(ARM_ARCH_V6KZT2): Likewise.
(ARM_ARCH_V7): Likewise.
(ARM_ARCH_V7A): Likewise.
(ARM_ARCH_V7VE): Likewise.
(ARM_ARCH_V7R): Likewise.
(ARM_ARCH_V7M): Likewise.
(ARM_ARCH_V7EM): Likewise.
(ARM_ARCH_V8A): Likewise.
(ARM_ARCH_V8M_BASE): New architecture bitfield.
(ARM_ARCH_THUMB2): Include instructions shared by ARMv6t2 and ARMv8-M.
(ARM_ARCH_V7A_SEC): Use ARM_EXT2_V6T2_V8M for the second extension
bitfield and reindent.
(ARM_ARCH_V7A_MP_SEC): Likewise.
(ARM_ARCH_V7R_IDIV): Likewise.
(ARM_ARCH_V8A_FP): Use ARM_AEXT2_V8A instead of ARM_EXT2_ATOMICS.
(ARM_ARCH_V8A_SIMD): Likewise.
(ARM_ARCH_V8A_CRYPTOV1): Likewise.
opcodes/
* arm-dis.c (arm_opcodes): Guard movw, movt cbz, cbnz, clrex, ldrex,
ldrexb, ldrexh, strex, strexb, strexh shared by ARMv6T2 and ARMv8-M by
ARM_EXT2_V6T2_V8M instead of ARM_EXT_V6T2.
2015-12-24 Thomas Preud'homme <thomas.preudhomme@arm.com>
bfd/
(tag_cpu_arch_combine): Adjust v4t_plus_v6_m and comb array to account
for new TAG_CPU_ARCH_V4T_PLUS_V6_M value. Deal with NULL values in
comb array.
binutils/
* readelf.c (arm_attr_tag_CPU_arch): Add ARMv8-M Mainline Tag_CPU_arch
value.
(arm_attr_tag_THUMB_ISA_use): Add ARMv8-M Mainline Tag_THUMB_ISA_use
value.
gas/
* config/tc-arm.c (arm_ext_m): Include ARMv8-M.
(arm_ext_v8m): New feature for ARMv8-M.
(arm_ext_atomics): New feature for ARMv8 atomics.
(do_tt): New encoding function for TT* instructions.
(insns): Add new entries for ARMv8-M specific instructions and
reorganize the ones shared by ARMv8-M Mainline and ARMv8-A.
(arm_archs): Define armv8-m.main architecture.
(cpu_arch_ver): Define ARM_ARCH_V8M_MAIN architecture version and
clarify the ordering rule.
(aeabi_set_public_attributes): Use TAG_CPU_ARCH_* macro to refer to
Tag_CPU_arch values for ARMv7e-M detection. Add logic to keep setting
Tag_CPU_arch to ARMv8-A for -march=all. Also set Tag_CPU_arch_profile
to 'A' if extension bit for atomic instructions is set, unless it is
ARMv8-M. Set Tag_THUMB_ISA_use to 3 for ARMv8-M. Set Tag_DIV_use to 0
for ARMv8-M Mainline.
gas/testsuite/
* gas/arm/archv8m.s: New file.
* gas/arm/archv8m-main.d: Likewise.
* gas/arm/attr-march-armv8m.main.d: Likewise.
* gas/arm/any-armv8m.s: Likewise.
* gas/arm/any-armv8m.d: Likewise.
include/elf/
* arm.h (TAG_CPU_ARCH_V8M_MAIN): Declare.
(MAX_TAG_CPU_ARCH): Define to TAG_CPU_ARCH_V8M_MAIN.
(TAG_CPU_ARCH_V4T_PLUS_V6_M): Define to unused value 15.
include/opcode/
* arm.h (ARM_EXT2_ATOMICS): New extension bit.
(ARM_EXT2_V8M): Likewise.
(ARM_EXT_V8): Adjust comment with regards to atomics and remove
mention of legacy use for that bit.
(ARM_AEXT2_V8_1A): New architecture extension bitfield.
(ARM_AEXT2_V8_2A): Likewise.
(ARM_AEXT_V8M_MAIN): Likewise.
(ARM_AEXT2_V8M): Likewise.
(ARM_ARCH_V8A): Use ARM_EXT2_ATOMICS for features in second bitfield.
(ARM_ARCH_V8_1A): Likewise with ARM_AEXT2_V8_1A.
(ARM_ARCH_V8_2A): Likewise with ARM_AEXT2_V8_2A.
(ARM_ARCH_V8M_MAIN): New architecture feature bitfield.
(ARM_ARCH_V8A_FP): Use ARM_EXT2_ATOMICS for features in second bitfield
and reindent.
(ARM_ARCH_V8A_SIMD): Likewise.
(ARM_ARCH_V8A_CRYPTOV1): Likewise.
(ARM_ARCH_V8_1A_FP): Use ARM_AEXT2_V8_1A to set second bitfield of
feature bits.
(ARM_ARCH_V8_1A_SIMD): Likewise.
(ARM_ARCH_V8_1A_CRYPTOV1): Likewise.
opcodes/
* arm-dis.c (arm_opcodes): Guard lda, ldab, ldaex, ldaexb, ldaexh, stl,
stlb, stlh, stlex, stlexb and stlexh by ARM_EXT2_ATOMICS instead of
ARM_EXT_V8.
(thumb32_opcodes): Add entries for wide ARMv8-M instructions.
bfd * elf-bfd.h: Add callback to count additional relocations.
* elf32-arm.c (_arm_elf_section_data): Add new counter.
(insert_cantunwind_after): Increment relocations counter.
(elf32_arm_fix_exidx_coverage): Remove exidx entries and add
terminating CANTUNWIND entry only in final builds.
(elf32_arm_add_relocation): New function.
(elf32_arm_write_section): Add relocations in relocatable builds.
(elf32_arm_count_additional_relocs): New function.
(elf_backend_count_additional_relocs): New define.
* bfd/elflink.c (bfd_elf_final_link): Use callback and adjust size of
.rel section.
* bfd/elfxx-target.h (elf_backend_count_additional_relocs): New define.
ld * emultempl/armelf.em (gld${EMULATION_NAME}_after_allocation): Call
elf32_arm_fix_exidx_coverage for relocatable builds.
ld/testsuite
* ld-arm/arm-elf.exp: New test.
* ld-arm/unwind-rel.d: New file.
* ld-arm/unwind-rel1.s: New file.
* ld-arm/unwind-rel2.s: New file.
* ld-arm/unwind-rel3.s: New file.
include/elf
* arm.h: Add arm SHF_ARM_NOREAD section flag.
bfd * bfd-in2.h: Regenerate.
* section.c: Add SEC_ELF_NOREAD.
* elf32-arm.c (elf32_arm_post_process_headers): Only set
PF_X attribute if a segment only contains section with
SHF_ARM_NOREAD flag.
(elf32_arm_fake_sections): Add SEC_ELF_NOREAD conversion.
(elf32_arm_section_flags): New function to convert SHF_ARM_NOREAD
to bfd flag.
(elf32_arm_lookup_section_flags): New function to allow
INPUT_SECTION_FLAGS directive with SHF_ARM_NOREAD flag.
(elf32_arm_special_sections): Add special sections array
to catch section prefix by '.text.noread' pattern.
ld/testsuite
* ld-arm/arm-elf.exp: New tests.
* ld-arm/thumb1-input-section-flag-match.d: New
* ld-arm/thumb1-input-section-flag-match.s: New
* ld-arm/thumb1-noread-not-present-mixing-two-section.d: New
* ld-arm/thumb1-noread-not-present-mixing-two-section.s: New
* ld-arm/thumb1-noread-present-one-section.d: New
* ld-arm/thumb1-noread-present-one-section.s: New
* ld-arm/thumb1-noread-present-two-section.d: New
* ld-arm/thumb1-noread-present-two-section.s: New
binutils
* readelf.c (get_elf_section_flags): Add support for ARM specific
section flags.
2015-12-16 Mickael Guene <mickael.guene@st.com>
bfd/
* bfd-in2.h: Regenerate.
* reloc.c: Add new relocations.
* libbfd.h (bfd_reloc_code_real_names): Add new relocations
display names.
* elf32-arm.c (elf32_arm_howto_table_1): Add HOWTO for new
relocations.
(elf32_arm_reloc_map): Add bfd/arm mapping for new relocations.
(elf32_arm_final_link_relocate): Implement new relocations
resolution.
gas/
* doc/c-arm.texi: Add documentation about new directives
* config/tc-arm.c (group_reloc_table): Add mapping between gas
syntax and new relocations.
(do_t_add_sub): Keep new relocations for add operand.
(do_t_mov_cmp): Keep new relocations for mov operand.
(insns): Use 'shifter operand with possible group relocation'
operand parse code for movs operand.
(md_apply_fix): Implement mov and add encoding when new
relocations on them.
(tc_gen_reloc): Add new relocations.
(arm_fix_adjustable): Since offset has a limited range ([0:255])
we disable adjust_reloc_syms() for new relocations.
gas/testsuite/
* gas/arm/adds-thumb1-reloc-local.d: New
* gas/arm/adds-thumb1-reloc-local.s: New
* gas/arm/movs-thumb1-reloc-local.d: New
* gas/arm/movs-thumb1-reloc-local.s: New
include/
* elf/arm.h: Add new arm relocations.
ld/testsuite/
* ld-arm/arm-elf.exp (armelftests_common): Add new relocations
tests.
* ld-arm/thumb1-adds.d: New
* ld-arm/thumb1-adds.s: New
* ld-arm/thumb1-movs.d: New
* ld-arm/thumb1-movs.s: New
The re-writing logic in _bfd_coff_final_link() overwrote the ".file"
part of the symbol table entry, due to not coping with the auxiliary
entry generated in all cases.
Note that while I would have wanted to add a test case,
(a) I didn't spot any one testing the base functionality here, and
(b) I wasn't able to figure out proper conditionals to use in e.g.
ld-elf/elf.exp to check for the necessary PE/PE+ support (which
varies by target).
Various fixes to linker relaxation. In general, we need to support
relaxing every branch, even if we don't relax it in the assembler,
so we can optionally defer relaxation to the linker.
* elf32-rl78.c (rl78_offset_for_reloc): Add more relocs.
(rl78_elf_relax_section): Add bc/bz/bnc/bnz/bh/bnh. Fix reloc
choices.
* config/rl78-parse.y: Make all branches relaxable via
rl78_linkrelax_branch().
* config/tc-rl78.c (rl78_linkrelax_branch): Mark all relaxable
branches with relocs.
(options): Add OPTION_NORELAX.
(md_longopts): Add -mnorelax.
(md_parse_option): Support OPTION_NORELAX.
(op_type_T): Add bh, sk, call, and br.
(rl78_opcode_type): Likewise.
(rl78_relax_frag): Fix not-relaxing logic. Add sk.
(md_convert_frag): Fix relocation handling.
(tc_gen_reloc): Strip relax relocs when not linker relaxing.
(md_apply_fix): Defer overflow handling for anything that needs a
PLT, to the linker.
* config/tc-rl78.h (TC_FORCE_RELOCATION): Force all relocations to
the linker when linker relaxing.
* doc/c-rl78.texi (norelax): Add.
This fixes some cases where the linker would incorrectly error on plt
relocs to local ifunc symbols. I've also tidied plt and ifunc
handling for ppc64, where check_relocs was allowing for the
possibility of plt calls via addr14/addr24 relocs but relocate_section
was not.
* elf32-ppc.c (ppc_elf_check_relocs): Don't error on local ifunc
plt call. Wrap long lines.
(ppc_elf_relocate_section): Wrap long lines.
* elf64-ppc.c (ppc64_elf_check_relocs): Don't error on local ifunc
plt calls. Move __tls_get_addr checks later. Don't create plt
for addr14/addr24 relocs.
(ppc64_elf_gc_sweep_hook): Adjust to suit check_relocs changes.
(ppc64_elf_relocate_section): Correct local ifunc handling for
PLT64, PLT32 and PLT16 relocs.
On 32-bit targets, memory requested for program/section headers on a
fuzzed binary can wrap to 0. A bfd_alloc of zero bytes actually
returns a one byte allocation rather than a NULL pointer. This then
leads to buffer overflows.
Making this check unconditional triggers an extremely annoying gcc-5
warning.
PR19323
* elfcode.h (elf_object_p): Check for ridiculous e_shnum and
e_phnum values.
