is_aligning_branch flag.
(find_address_of_next_align_frag): Limit by xtensa_fetch_width.
(future_alignment_required): Except for frags with is_aligning_branch
flag set, call frag_wane for frags that do not need to be reexamined
for aligning.
(relax_frag_immed): Replace orig_vinsn with cur_vinsn to fix a leak.
(convert_frag_immed): Likewise.
(convert_frag_narrow): Check is_aligning_branch flag.
* config/tc-xtensa.h (xtensa_frag_type): Add is_aligning_branch flag.
(xg_init_vinsn): Remove redundant initialization.
(xg_clear_vinsn): Zero all the slots with a single memset.
* config/xtensa-istack.h (vliw_insn): Move insnbuf field after slots.
2005-12-14 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (add_prefix): More fine-grained handling of
REX prefixes. Or new prefix value into i.prefix instead of
assigning.
gas/testsuite/
2005-12-14 Jan Beulich <jbeulich@novell.com>
* gas/i386/rex.[sd]: New.
* gas/i386/i386.exp: Run new test.
* config/tc-hppa.c (hppa_fix_adjustable): Don't reject for reduction
R_HPPA relocations that are 32-bits wide.
* gas/all/redef2.d: Allow "$DATA$" as well as ".data" in matches.
* gas/all/weakref1.d: Allow "$CODE$" as well as ".text" in matches.
* gas/hppa/reloc/reloc.exp: Adjust regexp for new output.
* config/tc-arm.c (s_arm_unwind_save_core): Don't emit an extra
opcode if r4-r15 are not saved.
gas/testsuite/
* gas/arm/unwind.s, gas/arm/unwind.d, gas/arm/unwind_vxworks.d: Add
a test for saving only the low registers.
2005-11-14 Jan Beulich <jbeulich@novell.com>
* config/tc-ia64.c (md): Rename regsym to indregsym and move
it to the end of the structure.
(ar): Field regnum is unsigned.
(cr): Likewise:
(indirect_reg): Likewise.
(declare_register_set): Parameter regnum is unsigned.
(declare_register): Parameter numregs and base_regnum are
unsigned. So is the local loop variable.
(md_begin): Restrict scope of local variable regnum, which
also is unsigned. Replace loops with function calls where
possible. Re-order things so that register groups are kept
together. Remove all uses of regsym except for indirect
registers. Replace use of regsym by indregsym for indirect
registers.
(ia64_optimize_expr): Replace use of regsym by indregsym for
indirect registers, with appropriate bias.
instructions. Define MIPS16_ALL_ARGS and MIPS16_ALL_STATICS for
save/restore encoding of the args field.
* mips16-opc.c: Add MIPS16e save/restore opcodes.
* mips-dis.c (print_mips16_insn_arg): Handle printing of 'm'/'M'
codes for save/restore.
* config/tc-mips.c (mips16_ip): Add handling of 'm' and 'M' codes
for the MIPS16e save/restore instructions.
* gas/mips/mips.exp: Run new save/restore tests.
* gas/testsuite/gas/mips/mips16e-save.s: New test for generating
different styles of save/restore instructions.
* gas/testsuite/gas/mips/mips16e-save.d: New.
(arm_reg_parse_multi): Return NULL rather than FAIL.
(arm_reg_parse): Fix comment, the function returns FAIL rather than NULL if
it is unable to parse the register name.
(do_ldrex): Use BAD_ADDR_MODE.
Change error message for PC-relative addressing.
(do_strex): Likewise.
(do_t_ldrex): Use BAD_ADDR_MODE.
(do_t_strex): Likewise.
* gas/arm/archv6t2-bad.s: Add tests of badly composed ldrex and strex
instructions.
* gas/arm/archv6t2-bad.l: Add expected error messages.
* gas/arm/r15-bad.l: Adjust error messages for r15 usage in ldrex and strex
instructions.
* config/obj-coff.c (obj_coff_section): Set readonly flag with the 'x'
attribute. Remember the actions of the 'w' and 'n' attributes and do not
allow the 'x','s' or 'd' attributes to change them.
Contribute the following change:
2005-09-19 Dave Brolley <brolley@redhat.com>
* config/tc-m32c.c (default_isa): New static variable.
(m32c_isa): Now of type CGEN_BITSET.
(md_begin): Pass &m32c_isa to m32c_cgen_cpu_open.
* elf32-bfin.c (bfd_bfin_elf32_create_embedded_relocs): Fix signedness
warning.
gas/
* Makefile.am (bfin-parse.h): Renamed from bfin-parse.tab.h.
(EXTRA_DIST): Add bfin-parse.h and bfin-lex.c.
* Makefile.in: Regenerate.
* config/bfin-lex.l: Include bfin-parse.h instead of bfin-parse.tab.h.
* config/tc-bfin.c (md_chars_to_number): Change the type of first
argument from unsigned char * to char * to remove signedness warnings.
2005-10-24 Jan Beulich <jbeulich@novell.com>
* ia64.h (enum ia64_opnd): Move memory operand out of set of
indirect operands.
bfd/
2005-10-24 Jan Beulich <jbeulich@novell.com>
* cpu-ia64-opc.c (elf64_ia64_operands): Move memory operand out of
set of indirect operands.
gas/
2005-10-24 Jan Beulich <jbeulich@novell.com>
* config/tc-ia64.c (enum reg_symbol): Delete IND_MEM.
(dot_rot): Change type of num_* variables. Check for positive count.
(ia64_optimize_expr): Re-structure.
(md_operand): Check for general register.
gas/testsuite/
2005-10-24 Jan Beulich <jbeulich@novell.com>
* gas/ia64/index.[sl]: New.
* gas/ia64/rotX.[sl]: New.
* gas/ia64/ia64.exp: Run new tests.
opcodes/
2005-10-24 Jan Beulich <jbeulich@novell.com>
* ia64-asmtab.c: Regenerate.
2005-10-24 Jan Beulich <jbeulich@novell.com>
* config/tc-ia64.c (declare_register): Call symbol_create.
(md_begin): Remove local variables total, ar_base, and cr_base.
Start loops for registers at their respective first one. Don't
update md.regsym for alias names. Generate alias name tp for r13.
gas/testsuite/
2005-10-24 Jan Beulich <jbeulich@novell.com>
* gas/ia64/regs.pl: Also check tp alias of r13.
* gas/ia64/regs.s: Regenerate.
* gas/ia64/regs.d: Adjust.
into jrc/jalrc versions if ISA_MIPS32+ and not doing the swap,
hence avoiding to emit a nop.
* gas/mips/mips.exp: Run new test.
* gas/testsuite/gas/mips/mips16e-jrc.s: New test for converting
jalr/jr to the compact jalrc/jrc instructions.
* gas/testsuite/gas/mips/mips16e-jrc.d: New.
LEX_BEGIN_NAME.
(bfin_start_line_hook): Remove the workaround for LSETUP(.
(bfin_name_is_register): Remove the workarounds for LSETUP(
and SAA(.
(bfin_start_label): Ditto.
unsigned line number. Do not include "dwarf2dbg.h".
* config/tc-xtensa.c (md_pseudo_table): Remove entry for "loc".
(xtensa_dwarf2_directive_loc, xtensa_dwarf2_emit_insn): Delete.
(xg_build_to_insn, xg_build_token_insn): Update TInsn uses.
(md_assemble): Use as_where instead of dwarf2_where.
(xg_assemble_vliw_tokens): Use unsigned line numbers instead of
dwarf2_line_infos. Change to call new_logical_line followed by
dwarf2_emit_insn.
- allowing true forward references (which will always assume the referenced
symbols have at the point of use) through the new .eqv pseudo-op and the
new == operator
- disallowing changing .equiv-generated equates (so that the protection this
provides is both forward and backward)
- snapshotting equates when their value gets changed so that previous uses
don't get affected by the new value.
- allowing expressions in places where absolute expressions (or register
names) are needed which were not completely resolvable at the point of
their definition but which are fully resolvable at the point of use
In addition it fixes PR/288.
(pa_ip): Promote from PA 1.0 to 1.1 immediately when 1.1 match is
found. Simplify handling of "ma" and "mb" completers.
* hppa.h (FLAG_STRICT): Revise comment.
(pa_opcode): Revise ordering rules. Add/move strict pa10 variants
before corresponding pa11 opcodes. Add strict pa10 register-immediate
entries for "fdc".
(parse_reg_without_prefix): New function.
(parse_reg): Check for '$' register prefix if --allow-reg-prefix is set.
(option md_longopts): Add allow-reg-prefix option.
* doc/c-sh.texi: Document --allow-reg-prefix option.
* NEWS: Mention the new switch.
* gas/sh/basic.exp: Run reg-prefix test.
* gas/sh/reg-prefix.s: New
* gas/sh/reg-prefix.d: New
2005-09-29 Jan Beulich <jbeulich@novell.com>
* config/tc-ia64.c (parse_operands): Always parse first operand of
alloc.
gas/testsuite/
2005-09-29 Jan Beulich <jbeulich@novell.com>
* gas/ia64/alloc.[sl]: New.
* gas/ia64/ia64.exp: Run new test.
2005-09-14 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (tc_x86_regname_to_dw2regnum): Add selector
registers, floating point control and status words, and mxcsr as
well as (for 64-bit code) segment base registers and rflags.
* config/tc-msp430.c (msp430_operands): Undo last changes. Instead...
(msp430_relax_frag): add a guard check to ensure that final fr_subtype
has been reached.
(mips_opts): Add -1 to initialize ase_mt.
(file_ase_mt): New variable for -mmt.
(CPU_HAS_MT): New define.
(validate_mips_insn): Add supports for +t, +T, !, $, *, &, g operand
formats.
(mips_ip): Check ase_mt to enable MT instructions.
Handle !, $, *, &, +T, +t, g operand formats.
For "mftc1", "mfthc1", "cftc1", "mttc1", "mtthc1", "cttc1", we allow
odd float registers.
(OPTION_MT, OPTION_NO_MT): New define.
(OPTION_COMPAT_ARCH_BASE): Change because of inserting MT define.
(md_parse_option): Parse OPTION_MT and OPTION_NO_MT.
(mips_after_parse_args): Set ase_mt based on CPU.
(s_mipsset): Handle ".set mt" and ".set nomt".
(mips_elf_final_processing): Remind of adding new flag for MT ASE.
(md_show_usage): Show usage of -mmt and -mno-mt.
* doc/as.texinfo: Document -mmt and -mno-mt options.
* doc/c-mips.texi: Likewise, and document ".set mt" and ".set nomt"
directives.
bfd/
* libbdf.h: Regenerate.
* bfd-in2.h: Regenerate.
* reloc.c: Add BFD_RELOC_ARM_T32_CP_OFF_IMM and
BFD_RELOC_ARM_T32_CP_OFF_IMM_S2.
gas/
* config/tc-arm.c (encode_arm_cp_address): Use
BFD_RELOC_ARM_T32_CP_OFF_IMM in thumb mode.
(do_iwmmxt_wldstbh): Use BFD_RELOC_ARM_T32_CP_OFF_IMM_S2 in thumb
mode.
(md_assemble): Only allow coprocessor instructions when Thumb-2 is
available.
(cCE, cC3): Define.
(insns): Use them for coprocessor instructions.
(md_pcrel_from_section): Handle BFD_RELOC_ARM_T32_CP_OFF_IMM.
(get_thumb32_insn): New function.
(put_thumb32_insn): New function.
(md_apply_fix): Handle BFD_RELOC_ARM_T32_CP_OFF_IMM and
BFD_RELOC_ARM_T32_CP_OFF_IMM_S2.
gas/testsuite/
* gas/arm/vfp-bad_t2.d, gas/arm/vfp-bad_t2.l, arm/vfp-bad_t2.s,
gas/arm/vfp1_t2.d, gas/arm/vfp1_t2.s, gas/arm/vfp1xD_t2.d,
gas/arm/vfp1xD_t2.s, gas/arm/vfp2_t2.d, gas/arm/vfp2_t2.s): New files.
opcodes/
* arm-dis.c (coprocessor_opcodes): New.
(arm_opcodes, thumb32_opcodes): Remove coprocessor insns.
(print_insn_coprocessor): New function.
(print_insn_arm): Use print_insn_coprocessor. Remove coprocessor
format characters.
(print_insn_thumb32): Use print_insn_coprocessor.
when the frags are different for the 2 instructions we want to
swap. If the lengths of the 2 instructions are not the same, we
won't do the swap but emit an nop.
2005-08-26 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (intel_e09): Set JumpAbsolute when seeing a PTR-
qualified operand of a branch.
(intel_bracket_expr): Set JumpAbsolute here...
(intel_e11): ... rather than here.
gas/testsuite/
2005-08-26 Jan Beulich <jbeulich@novell.com>
* gas/i386/intel.s: Adjust.
* gas/i386/intelok.s: Add two more insns.
* gas/i386/intelok.d: Adjust.
(mips_opts): Add -1 to initialize ase_dsp.
(file_ase_dsp): New variable for -mdsp.
(CPU_HAS_DSP): New define.
(validate_mips_insn): Add supports for 3, 4, 5, 6, 7, 8, 9, 0, ', :, @
operand formats.
(mips_ip): Add min_range and max_range for checking singed numbers.
Check ase_dsp to enable DSP instructions.
Handle 3, 4, 5, 6, 7, 8, 9, 0, ', :, @ operand formats.
(OPTION_DSP, OPTION_NO_DSP): New define.
(OPTION_COMPAT_ARCH_BASE): Change because of inserting DSP define.
(md_parse_option): Parse OPTION_DSP and OPTION_NO_DSP.
(mips_after_parse_args): Set ase_dsp based on CPU.
(s_mipsset): Handle ".set dsp" and ".set nodsp".
(mips_elf_final_processing): Remind of adding new flag for DSP ASE.
(md_show_usage): Show usage of -mdsp and -mno-dsp.
2005-08-22 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (object_64bit): New.
(i386_target_format): Initialize it.
(output_disp): Use object_64bit for relocation type determination.
(output_imm): Likewise.
(i386_validate_fix): Likewise.
(tc_gen_reloc): Likewise.
(lex_got): Likewise. Remove static mode_name. Change array size
of gotrel's rel field, and adjust its initializer. Adjust diagnostic.
(x86_cons): Use object_64bit for deciding whether quad fields can
have relocations.
gas/testsuite/
2005-08-22 Jan Beulich <jbeulich@novell.com>
* gas/i386/mixed-mode-reloc.s, gas/i386/mixed-mode-reloc32.d,
gas/i386/mixed-mode-reloc64.d: New.
* gas/i386/i386.exp: Run new tests.
* cofflink.c (_bfd_coff_generic_relocate_section): Correct
comment.
gas
* config/obj-coff.c (obj_coff_weak): Set auxiliary record
of NT weak externals to IMAGE_WEAK_EXTERN_SEARCH_NOLIBRARY.
* config/tc-msp430.c (msp430_enable_relax): New flag.
(msp430_enable_polys): Likewise.
(OPTION_RELAX): New option.
(OPTION_POLYMORPHS): Likewise.
(md_longopts): New long options.
(md_show_usage): Updated.
(md_parse_option): Add new options handler.
(msp430_operands): Add check if polymorph insns are enabled.
(msp430_force_relocation_local): New function.
(md_apply_fix): Now delete relocs according to new flags combination.
(msp430_relax_frag): Convert long branches to short branches only if
flag msp430_enable_relax is set.
* config/tc-msp430.h (TC_FORCE_RELOCATION_LOCAL): Defined.
(msp430_force_relocation_local): Likewise.
* doc/c-msp430.texi: Describe new options.
gas/
* config/tc-arm.c (current_it_mask, current_cc): New variables.
(do_t_add_sub): Use correct encodings inside IT block.
(do_t_arit3c): Ditto.
(do_t_it): Simplify logic. Set current_it_mask and current_cc.
(md_assemble): Verify conditional suffixes agains IT blocks.
gas/testsuite/
* gas/arm/thumb32.s: Use correct conditional suffixes inside IT
blocks.
* gas/arm/thumb2_it.d, gas/arm/thumb2_it.s: New test.
instruction.
gas/arm/iwmmxt-bad2.s: New file: Check for error messages about erroneous
offsets in iwmmxt instructions. Cannot be part of iwmmxt-bad.s because
the errors there stop the assembler before it gets to check the offsets
in instructions.
gas/arm/iwmmxt-bad2.d: New file.
gas/arm/iwmmxt-bad2.l: New file: Expected error messages.
gas/arm/iwmmxt.s: Change the offset values of the WLDRD, WSTRD and WSTRW
instructions to be larger than +/-255.
gas/arm/iwmmxt.d: Fix the expected results for these instructions.
2005-07-26 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (optimize_imm): Calculate candidate immediates
mask from guessed suffix, but mask out other immediate types only
if at least on candidate is valid for the insn.
gas/testsuite/
2005-07-26 Jan Beulich <jbeulich@novell.com>
* gas/i386/immed32.[sd]: New.
* gas/i386/immed64.[sd]: New.
* gas/i386/i386.exp: Run new tests.
2005-07-18 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (md_begin): Use IS_ELF.
(tc_i386_fix_adjustable): Likewise.
(md_estimate_size_before_relax): Likewise.
(md_apply_fix): Likewise.
(i386_target_format): Likewise.
(lex_got): Define to NULL when not ELF or when LEX_AT. Check IS_ELF.
(i386_immediate): Remove #ifdef LEX_AT.
(i386_displacement): Likewise.
* config/tc-i386.h (x86_cons): Prototype only when ELF and when not
LEX_AT.
2005-07-18 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (reloc): Convert to ISO C90. Change first
parameter to unsigned. Parameter sign now is tristate - zero/
positive mean unsigned/signed, negative means signedness doesn't
matter. Check field size,
signedness, and pcrel-ness are in agreement between relocated field
and relocation type. Adjust diagnostics.
(optimize_imm): And type mask of operand instead of overwriting it.
(lex_got): Convert to ISO C90. Add third parameter. Add new field to
local structure and initialize gotrel accordingly. Pass caller as
mask of types that the operator can match.
(x86_cons_fix_new): Let reloc know that signedness of relocation
doesn't matter.
(x86_pe_cons_fix_new): Likewise.
(x86_cons): Pass additional argument to lex_got.
(i386_immediate): New local variable 'types'. Pass its address as
additional argument to lex_got. Mask out operand types not supported
befoe returning.
(i386_displacement): Likewise. Set bigdisp to all types supported in
64-bit mode, combining the previously split initialization.
gas/testsuite/
2005-07-18 Jan Beulich <jbeulich@novell.com>
* gas/i386/reloc32.[sdl]: New.
* gas/i386/reloc64.[sdl]: New.
* gas/i386/i386.exp: Run new tests.
2005-07-14 Jim Blandy <jimb@redhat.com>
* configure.in: Add cases for Renesas m32c.
* configure: Regenerated.
bfd/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for m32c-*-elf (Renesas m32c and m16c).
* Makefile.am (ALL_MACHINES): Add cpu-m32c.lo.
(ALL_MACHINES_CFILES): Add cpu-m32c.c.
(BFD32_BACKENDS): Add elf32-m32c.lo.
(BFD32_BACKENDS_CFILES): Add elf32-m32c.c.
(cpu-m32c.lo, elf32-m32c.lo): New rules, generated by 'make dep-am'.
* Makefile.in: Regenerated.
* archures.c (bfd_arch_m32c, bfd_mach_m16c, bfd_mach_m32c): New
arch and mach codes.
(bfd_m32c_arch): New arch info object.
(bfd_archures_list): List bfd_m32c_arch.
* bfd-in2.h: Regenerated.
* config.bfd: Add case for the m32c.
* configure.in: Add case for the m32c.
* configure: Regenerated.
* cpu-m32c.c, elf32-m32c.c: New files.
* libbfd.h: Regenerated.
* targets.c (bfd_elf32_m32c_vec): Declare.
(_bfd_target_vector): List bfd_elf32_m32c_vec.
binutils/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
* readelf.c: #include "elf/m32c.h"
(guess_is_rela, dump_relocations, get_machine_name): Add cases for
EM_M32C.
* Makefile.am (readelf.o): Update dependencies.
* Makefile.in: Regenerated.
cpu/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
* m32c.cpu, m32c.opc: Machine description for the Renesas M32C.
gas/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for the Renesas M32C.
* Makefile.am (CPU_TYPES): List m32c.
(TARGET_CPU_CFILES): List config/tc-m32c.c.
(TARGET_CPU_HFILES): List config/tc-m32c.h.
* configure.in: Add case for m32c.
* configure.tgt: Add cases for m32c and m32c-*-elf.
* configure: Regenerated.
* config/tc-m32c.c, config/tc-m32c.h: New files.
* doc/Makefile.am (CPU_DOCS): Add c-m32c.texi.
* doc/Makefile.in: Regenerated.
* doc/all.texi: Set M32C.
* doc/as.texinfo: Add text for the M32C-specific options and line
comment characters, and refer to c-m32c.texi.
* doc/c-m32c.texi: New file.
include/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
* dis-asm.h (print_insn_m32c): New declaration.
include/elf/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for Renesas M32C and M16C.
* common.h (EM_M32C): New machine number.
* m32c.h: New file.
ld/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for the Renesas M32C and M16C.
* Makefile.am (ALL_EMULATIONS): Add eelf32m32c.o.
(eelf32m32c.c): New target.
* Makefile.in: Regenerated.
* configure.tgt: Add case for m32c-*-elf.
* emulparams/elf32m32c.sh: New file.
opcodes/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for the Renesas M32C and M16C.
* m32c-asm.c, m32c-desc.c, m32c-dis.c, m32c-ibld.c, m32c-opc.c: New.
* m32c-desc.h, m32c-opc.h: New.
* Makefile.am (HFILES): List m32c-desc.h and m32c-opc.h.
(CFILES): List m32c-asm.c, m32c-desc.c, m32c-dis.c, m32c-ibld.c,
m32c-opc.c.
(ALL_MACHINES): List m32c-asm.lo, m32c-desc.lo, m32c-dis.lo,
m32c-ibld.lo, m32c-opc.lo.
(CLEANFILES): List stamp-m32c.
(M32C_DEPS): List stamp-m32c, if CGEN_MAINT.
(CGEN_CPUS): Add m32c.
(m32c-asm.c, m32c-desc.c, m32c-dis.c, m32c-ibld.c, m32c-opc.c)
(m32c-desc.h, m32c-opc.h): Depend on M32C_DEPS.
(m32c_opc_h): New variable.
(stamp-m32c, m32c-asm.lo, m32c-desc.lo, m32c-dis.lo, m32c-ibld.lo)
(m32c-opc.lo): New rules.
* Makefile.in: Regenerated.
* configure.in: Add case for bfd_m32c_arch.
* configure: Regenerated.
* disassemble.c (ARCH_m32c): New.
[ARCH_m32c]: #include "m32c-desc.h".
(disassembler) [ARCH_m32c]: Add case for bfd_arch_m32c.
(disassemble_init_for_target) [ARCH_m32c]: Same.
* cgen-ops.h, cgen-types.h: New files.
* Makefile.am (HFILES): List them.
* Makefile.in: Regenerated.
2005-07-05 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.h (CpuSVME): New.
(CpuUnknownFlags): Include CpuSVME.
* config/tc-i386.c (cpu_arch): Add .pacifica and .svme. Add opteron
as alias of sledgehammer.
(md_assemble): Include invlpga in the check for insns with two source
operands.
(process_operands): Include SVME insns in the check for ignored
segment overrides. Adjust diagnostic.
(i386_index_check): Special-case SVME insns with memory operands.
gas/testsuite/
2005-07-05 Jan Beulich <jbeulich@novell.com>
* gas/i386/svme.d: New.
* gas/i386/svme.s: New.
* gas/i386/svme64.d: New.
* gas/i386/i386.exp: Run new tests.
include/opcode/
2005-07-05 Jan Beulich <jbeulich@novell.com>
* i386.h (i386_optab): Add new insns.
opcodes/
2005-07-05 Jan Beulich <jbeulich@novell.com>
* i386-dis.c (SVME_Fixup): New.
(grps): Use it for the lidt entry.
(PNI_Fixup): Call OP_M rather than OP_E.
(INVLPG_Fixup): Likewise.
2005-07-01 Jan Beulich <jbeulich@novell.com>
* config/tc-ia64.c (line_separator_chars): Add '{' and '}'.
(output_spill_psprel, output_spill_psprel_p): Combine.
(output_spill_sprel, output_spill_sprel_p): Combine.
(output_spill_reg, output_spill_regp_p): Combine.
(process_one_record): Handle psp_psprel.
(parse_predicate_and_operand): New.
(convert_expr_to_ab_reg): Two new parameters. Return void. Always
initialize output values. Emit diagnostic case here.
(convert_expr_to_xy_reg): Likewise. Don't allow r0, f0, and f1.
(add_unwind_entry): New second parameter. Allow first parameter to
be NULL. Parse optional tag, emit warning about further support for
it otherwise being missing. Check end-of-line when requested.
(dot_fframe): Clear operand when wrong. Allow tag.
(dot_vframe): Likewise.
(dot_vframesp): Likewise. Rename parameter, issue warning when psp
relative.
(dot_vframepsp): Remove.
(dot_altrp): Clear operand when wrong. Allow tag.
(dot_save): Likewise. Let default case also go through
add_unwind_entry.
(dot_savemem): Likewise.
(dot_restore): Don't return when wrong operand. Allow tag.
(dot_spillreg, dot_spillreg_p): Combine. Simplify by using
parse_predicate_and_operand and the new arguments to
convert_expr_to_ab_reg and convert_expr_to_xy_reg. Don't return
when wrong operand. Allow tag.
(dot_restorereg, dot_restorereg_p): Likewise.
(dot_spillmem, dot_spillmem_p): Likewise.
(dot_saveg): Clear operand when wrong. Perform tighter operand
checks. Allow tag.
(dot_savef): Likewise.
(dot_saveb): Likewise.
(dot_savegf): Likewise.
(dot_spill): Remove end-of-line check. Combine. Simplify by using
parse_predicate_and_operand and the new arguments to
convert_expr_to_ab_reg and convert_expr_to_xy_reg. Don't return
when wrong operand. Allow tag.
(popcount): New.
(dot_label_state): Don't return when wrong operand.
(dot_copy_state): Likewise.
(dot_unwabi): Likewise. Check if in prologue.
(dot_body): Don't call demand_empty_rest_of_line.
(dot_prologue): Type of mask and grsave is unsigned. Perform tighter
operand checks.
(md_pseudo_table): Also use dot_restorereg for .restorereg.p. Also
use dot_spillreg for .spillreg.p. Also use dot_spillmem for
.spillpsp.p and .spillsp.p. Also use dot_vframesp for .vframepsp.
(parse_operand): New second parameter. Don't deal with '}' here
anymore. Don't advance past end-of-line.
(parse_operands): Pass second argument to parse_operand.
(ia64_start_line): Prevent out-of-bounds access through
input_line_pointer. Deal with '}' here.
(ia64_unrecognized_line): Don't deal with '}' here.
(dot_alias): Use ignore_rest_of_line not its deprecated alias
discard_rest_of_line.
gas/testsuite/
2005-07-01 Jan Beulich <jbeulich@novell.com>
* gas/ia64/group-2.s: Use register as second operand of .prologue.
* gas/ia64/unwind-err.s: Add check for .vframesp.
* gas/ia64/unwind-err.l: Adjust.
* gas/ia64/strange.[sd]: New.
* gas/ia64/unwind-bad.[sl]: New.
* gas/ia64/unwind-ok.[sd]: New.
* gas/ia64/ia64.exp: Run new tests.
* config/tc-arm.c (T_OPCODE_BRANCH, encode_arm_addr_mode_2)
(encode_arm_addr_mode_3, encode_arm_cp_address, do_blx, do_t_blx)
(do_t_branch, insns [b, bl]): Don't encode pipeline offset.
(s_arm_elf_cons): Disallow use of (plt) suffix.
(do_adrl): Adjust X_add_number unconditionally.
(md_pcrel_from): Rename md_pcrel_from_section, add second segT
argument. Handle all adjustment for pipeline offset here.
(md_apply_fix): No need to undo work of md_pcrel_from. No
need to extract pre-encoded pipeline adjustments from various
branch instructions. Generally, assume instructions are already
all-bits-zero in the field being fixed up. Remove all OBJ_ELF
special cases. Handle BFD_RELOC_ARM_PLT32 like
BFD_RELOC_ARM_PCREL_BRANCH.
(tc_gen_reloc): Remove OBJ_ELF special case.
* config/tc-arm.c: Define MD_PCREL_FROM_SECTION.
gas/testsuite:
* gas/arm/arm.exp: Don't special case ldconst, arm7t, or copro
for *-wince-*.
* gas/arm/wince_arm7t.d, gas/arm/wince_copro.d
* gas/arm/wince_ldconst.d: Delete.
2005-06-20 H.J. Lu <hongjiu.lu@intel.com>
PR 1013
* config/tc-i386.c (md_assemble): Don't call optimize_disp on
movabs.
(optimize_disp): Optimize only if possible. Don't use 64bit
displacement on non-constants and do same on constants if
possible.
gas/testsuite/
2005-06-20 H.J. Lu <hongjiu.lu@intel.com>
PR 1013
* i386/x86_64.s: Add absolute 64bit addressing tests for mov.
* i386/x86_64.s: Updated.
include/opcode/
2005-06-20 H.J. Lu <hongjiu.lu@intel.com>
PR 1013
* i386.h (i386_optab): Update comments for 64bit addressing on
mov. Allow 64bit addressing for mov and movq.
2005-06-17 Jan Beulich <jbeulich@novell.com>
* bfd-in2.h (elf_x86_64_reloc_type): Add BFD_RELOC_X86_64_GOTOFF64
and BFD_RELOC_X86_64_GOTPC32.
* libbfd.h (bfd_reloc_code_real_names): Likewise.
* elf64-x86-64.c (x86_64_elf_howto_table): Add entries for
R_X86_64_PC64, R_X86_64_GOTOFF64, and R_X86_64_GOTPC32.
(x86_64_reloc_map): Add entries for R_X86_64_PC64, R_X86_64_GOTOFF64,
and R_X86_64_GOTPC32.
(elf64_x86_64_info_to_howto): Adjust bounding relocation type.
(elf64_x86_64_check_relocs): Also handle R_X86_64_PC64,
R_X86_64_GOTOFF64, and R_X86_64_GOTPC32.
(elf64_x86_64_relocate_section): Likewise.
(elf64_x86_64_gc_sweep_hook): Also handle R_X86_64_PC64.
gas/
2005-06-17 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (reloc): Also handle BFD_RELOC_64_PCREL.
(tc_i386_fix_adjustable): Include BFD_RELOC_X86_64_GOTOFF64,
BFD_RELOC_X86_64_DTPOFF64, and BFD_RELOC_X86_64_TPOFF64.
(output_disp): Do GOTPC conversion also for BFD_RELOC_X86_64_32S
and BFD_RELOC_32_PCREL. Use BFD_RELOC_X86_64_GOTPC32 instead of
aborting.
(output_imm): Do GOTPC conversion also for BFD_RELOC_X86_64_32S.
Use BFD_RELOC_X86_64_GOTPC32 instead of aborting.
(tc_gen_reloc): Do GOTPC conversion also for BFD_RELOC_32_PCREL.
Use BFD_RELOC_X86_64_GOTPC32 instead of aborting. Also handle
BFD_RELOC_X86_64_GOTOFF64, BFD_RELOC_X86_64_GOTPC32,
BFD_RELOC_X86_64_DTPOFF64, and BFD_RELOC_X86_64_TPOFF64. Also
convert 8-byte pc-relative relocations.
(lex_got): Use BFD_RELOC_X86_64_GOTOFF64 for 64-bit @gotoff.
(i386_validate_fix): Likewise.
(x86_cons): Also handle quad values in 64-bit mode.
(i386_displacement): Also handle BFD_RELOC_X86_64_GOTOFF64.
(md_apply_fix): Include BFD_RELOC_X86_64_DTPOFF64 and
BFD_RELOC_X86_64_TPOFF64 in the TLS check. Also convert BFD_RELOC_64
to pc-relative variant. Also check for BFD_RELOC_64_PCREL.
gas/testsuite/
2005-06-17 Jan Beulich <jbeulich@novell.com>
* gas/i386/x86-64-pcrel.s: Add insn requiring 64-bit pc-relative
relocation. Add insns for all widths of non-pc-relative relocations.
* gas/i386/x86-64-pcrel.d: Adjust.
include/elf/
2005-06-17 Jan Beulich <jbeulich@novell.com>
* x86-64.h (elf_x86_64_reloc_type): Adjust comment for
R_X86_64_GOTPCREL. Add R_X86_64_PC64, R_X86_64_GOTOFF64, and
R_X86_64_GOTPC32.
* config/tc-arm.c (find_real_start): Check S_IS_LOCAL on
symbolP as well as for names with a leading dot. Use ACONCAT.
(md_apply_fix): For branch relocations, only replace value
with fixP->fx_offset (under #ifdef OBJ_ELF) when !fixP->fx_done.
(arm_force_relocation): Remove #ifdef OBJ_ELF case.
* config/tc-arm.h (LOCAL_LABEL): Remove unnecessary parentheses.
(LOCAL_LABEL_PREFIX): Don't define.
gas/testsuite:
* gas/arm/thumb.s: Only branch to labels defined in this file.
* gas/arm/thumb.d, gas/arm/thumb32.d: Adjust expected output.
* config/tc-m68k.c (m68k_ip): Test for insn compatiblity using a temporary copy
of the operands array so that changes can be safely backed out if the insn
does not match.
(m68k_compare_opcode): Shortcut the test when the parameters are the same.
Return 1 if the names match but the second opcode is further on in the array
than the first.
* config/tc-mips.c (load_register): Add leading "0x" to the
output of sprintf_vma().
(macro): Likewise.
gas/testsuite/:
* gas/mips/ldstla-32-1.l: Update to handle leading zeroes.
* gas/mips/ldstla-32-mips3-1.l: Likewise.
(TC_INIT_FIX_DATA): Initialize to 0, not NULL.
* config/tc-arm.c (fix_new_arm): Remove now-unnecessary cast.
(md_apply_fix3): Delete fix_is_thumb variable; refer to
fixP->tc_fix_data directly in the sole place it was used.
Explicitly truncate value, *valP, fixP->fx_addnumber, and
fixP->fx_offset to 32 bits, for consistent behavior between 32-
and 64-bit hosts.
2005-05-27 Jan Beulich <jbeulich@novell.com>
* config/tc-ia64.c (struct proc_pending): New.
(unwind): Replace proc_start with proc_pending.
(unwind_diagnostic): Check unwind.proc_pending.sym.
(dot_proc): Replace unwind.proc_start with unwind.proc_pending.sym.
Check if previous proc not closed. Record all entry points.
(dot_endp): Replace unwind.proc_start with unwind.proc_pending.sym.
Set symbol sizes for entry points recorded in dot_proc. Check
arguments for consistency with respective .proc's.
(md_assemble): Replace unwind.proc_start with
unwind.proc_pending.sym.
gas/testsuite/
2005-05-27 Jan Beulich <jbeulich@novell.com>
* gas/ia64/proc.l: Adjust.
2005-05-27 Jan Beulich <jbeulich@novell.com>
* config/tc-ia64.c (emit_one_bundle): Restrict scope of ptr, end_ptr,
and last_ptr. Check all in-use slots for first one with non-NULL
unwind_record. Don't reload end_ptr before second update round.
2005-05-25 Jan Beulich <jbeulich@novell.com>
* config/tc-ia64.c (ia64_gen_real_reloc_type): Also handle
BFD_RELOC_UNUSED when determining the width of the reloc.
2005-05-19 Jan Beulich <jbeulich@novell.com>
* config/tc-ia64.c (dot_endp): Don't use global symbol for unwind
relocations in unwind section.
gas/testsuite/
2005-05-19 Jan Beulich <jbeulich@novell.com>
* gas/ia64/reloc-uw.s: New.
* gas/ia64/reloc-uw.d: New.
* gas/ia64/reloc-uw-ilp32.d: New.
* gas/ia64/ia64.exp: Run new test.
* arm.h: Import complete list of official relocation names
and numbers from AAELF. Define FAKE_RELOCs for old names.
Remove a few old names no longer used anywhere.
bfd:
* elf32-arm.c: Wherever possible, use official reloc names
from AAELF.
(elf32_arm_howto_table, elf32_arm_tls_gd32_howto)
(elf32_arm_tls_ldo32_howto, elf32_arm_tls_ldm32_howto)
(elf32_arm_tls_le32_howto, elf32_arm_tls_ie32_howto)
(elf32_arm_vtinherit_howto, elf32_arm_vtentry_howto)
(elf32_arm_pc11_howto, elf32_arm_thm_pc9_howto, elf32_arm_got_prel)
(elf32_arm_r_howto): Replace with elf32_arm_howto_table_1,
elf32_arm_howto_table_2, and elf32_arm_howto_table_3.
Add many new relocations from AAELF.
(elf32_arm_howto_from_type): Update to match.
(elf32_arm_reloc_map): Add entries for R_ARM_THM_JUMP24,
R_ARM_THM_JUMP11, R_ARM_THM_JUMP19, R_ARM_THM_JUMP8,
R_ARM_THM_JUMP6, R_ARM_GNU_VTINHERIT, and R_ARM_GNU_VTENTRY.
(elf32_arm_reloc_type_lookup): Use elf32_arm_howto_from_type.
(elf32_arm_final_link_relocate): Add support for
R_ARM_THM_JUMP24, R_ARM_THM_JUMP19, R_ARM_THM_JUMP6. Remove
case entries redundant with default.
* reloc.c: Reorganize ARM relocations. Add Thumb
assembler-internal relocations BFD_RELOC_ARM_T32_OFFSET_U8,
BFD_RELOC_ARM_T32_OFFSET_IMM, BFD_RELOC_ARM_T32_IMMEDIATE.
Add visible relocations BFD_RELOC_THUMB_PCREL_BRANCH7,
BFD_RELOC_THUMB_BRANCH20, BFD_RELOC_THUMB_BRANCH25.
Delete unused relocations BFD_RELOC_ARM_GOT12, BFD_RELOC_ARM_COPY.
* bfd-in2.h, libbfd.h: Regenerate.
opcodes:
* arm-dis.c (thumb_opcodes): Add disassembly for V6T2 16-bit
instructions. Adjust disassembly of some opcodes to match
unified syntax.
(thumb32_opcodes): New table.
(print_insn_thumb): Rename print_insn_thumb16; don't handle
two-halfword branches here.
(print_insn_thumb32): New function.
(print_insn): Choose among print_insn_arm, print_insn_thumb16,
and print_insn_thumb32. Be consistent about order of
halfwords when printing 32-bit instructions.
gas:
* hash.c (hash_lookup): Add len parameter. All callers changed.
(hash_find_n): New interface.
* hash.h: Prototype hash_find_n.
* sb.c: Include as.h.
(scrub_from_sb, sb_to_scrub, scrub_position): New statics.
(sb_scrub_and_add_sb): New interface.
* sb.h: Prototype sb_scrub_and_add_sb.
* input-scrub.c (input_scrub_include_sb): Use sb_scrub_and_add_sb.
* config/tc-arm.h (TC_FORCE_RELOCATION_LOCAL): Remove
reference to BFD_RELOC_ARM_GOT12 which is never generated.
* config/tc-arm.c: Rewrite, adding Thumb-2 support.
gas/testsuite:
* gas/arm/arm.exp: Convert all existing "gas_test" tests to
"run_dump_test" tests. Run more tests unconditionally. Run new tests.
* gas/arm/arch4t.s, gas/arm/arch6zk.s, gas/arm/arm3.s, gas/arm/arm6.s
* gas/arm/arm7dm.s, gas/arm/bignum1.s, gas/arm/float.s
* gas/arm/immed.s, gas/arm/iwmmxt.s, gas/arm/offset.s, gas/arm/thumb.s:
Adjust to work as a dump test.
* gas/arm/arch4t.d, gas/arm/arch6zk.d, gas/arm/arm3.d, gas/arm/arm6.d
* gas/arm/arm7dm.d, gas/arm/bignum1.d, gas/arm/float.d
* gas/arm/immed.d, gas/arm/iwmmxt.d, gas/arm/offset.d, gas/arm/thumb.d:
New files.
* gas/arm/armv1-bad.l, gas/arm/armv1-bad.s: Remove tests for
diagnostics that don't happen in the first pass anymore.
* gas/arm/iwmmxt-bad.l, gas/arm/r15-bad.l, gas/arm/req.l
* gas/arm/vfp-bad.l:
Update expected diagnostics.
* gas/arm/pic.d: Update expected reloc name.
* gas/arm/thumbv6.d: CPY no longer appears in disassembly.
* gas/arm/r15-bad.s: Avoid two-argument mul.
* gas/arm/req.s: Adjust comments.
* gas/arm/maverick.d, gas/arm/maverick.s: Avoid inappropriate
use of PC.
* gas/arm/macro-1.d, gas/arm/macro1.s
* gas/arm/t16-bad.l, gas/arm/t16-bad.s
* gas/arm/tcompat.d, gas/arm/tcompat.s
* gas/arm/tcompat2.d, gas/arm/tcompat2.s
* gas/arm/thumb32.d, gas/arm/thumb32.s
New test pair.
ld/testsuite:
* ld-arm/mixed-app.d: Adjust expected disassembly a little.
* config/tc-v850.c (md_assemble): When creating a fix record the operand in the
tc_fix_data field.
(md_apply_fix3): When applying a resolved fix use the operand's insertion
procedure to store the value, if the operand has been recorded.
* gas/v850/split-lo16.s: Add test for a lo() pseudo reloc corrupting an ld.w
instruction.
* gas/v850/split-lo16.d: Add expected, correct (ie not corrupt) output.
* frags.c (frag_grow): Don't be too greedy in allocating memory.
* config/tc-hppa.c (pa_block): Check arguments to .block[z].
gas/testsuite/
* gas/hppa/parse/block1.s: Use official limit (0x3fffffff) for
.block.
* config/tc-mmix.c (mmix_handle_mmixal): Rearrange slightly.
Handle label-without-colon before ordinary dot-pseudo as an
ordinary label. Don't leak memory for label-without-colon alone
on a line. Don't mmixal-munge operands for dot-pseudos.
2005-05-09 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (optimize_disp): Discard displacement entirely when zero and
not required by encoding constraints.
gas/testsuite/
2005-05-09 Jan Beulich <jbeulich@novell.com>
* gas/i386/tlsd.[sd]: Adjust to not assume zero displacement will
actually be present in memory addressing.
* gas/i386/tlspic.[sd]: Likewise.
2005-05-09 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (parse_insn): Disallow use of prefix separator
and comma in Intel mode.
include/opcode/
2005-05-09 Jan Beulich <jbeulich@novell.com>
* i386.h (i386_optab): Add ht and hnt.
2005-05-09 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (tc_x86_regname_to_dw2regnum): Correct 64-bit mode
names to match ABI. Add more registers for 32-bit and 64-bit modes.
Make name array static and const. Adjust lookup to account for NULL
entries (standing for unused register numbers).
2005-05-09 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (parse_insn): Consider all matching instructions
when checking for string instruction after string-only prefix.
bfd/
* config.bfd: Use bfd_elf32_i386_vxworks_vec for i?86-*-vxworks.
* configure.in: Add bfd_elf32_i386_vxworks_vec. i386 targets need
elf-vxworks.lo.
* configure: Regenerate.
* Makefile.am (BFD32_BACKENDS): Add elf-vxworks.lo.
(BFD32_BACKENDS_CFILES): Add elf-vxworks.c.
(elf32-i386.lo): Depend on elf-vxworks.h.
(elf-vxworks.lo): New rule.
* Makefile.in: Regenerate.
* elf-bfd.h (elf_backend_data): Update type of
elf_backend_emit_relocs.
(_bfd_elf_link_output_relocs): Update prototype.
* elflink.c (_bfd_elf_link_output_relocs): Always use
bed->elf_backend_emit_relocs when outputting relocations.
* elfxx-target.h (elf_backend_emit_relocs): Default to
_bfd_elf_link_output_relocs.
* targets.c (bfd_elf32_i386_vxworks_vec): Declare.
(_bfd_target_vector): Add bfd_elf32_i386_vxworks_vec.
* elf32-i386.c: Add elf32-i386-vxworks target BFD.
(elf_i386_plt0_entry): Remove padding.
(elf_i386_pic_plt0_entry): Ditto.
(PLTRESOLVE_RELOCS_SHLIB, PLTRESOLVE_RELOCS): Define.
(PLT_NON_JUMP_SLOT_RELOCS): Define.
(elf_i386_link_hash_table): Add srelplt2, hgot, hplt, is_vxworks and
plt0_pad_byte fields.
(elf_i386_link_hash_table_create): Zero them.
(elf_i386_create_dynamic_sections): Create static relocation section.
(allocate_dynrelocs): Allocate space for static PLT relocations.
(elf_i386_size_dynamic_sections): Save shortcuts to PLT and GOT
symbols. Give PLT symbols function type. Don't strip PLT sections
if we have exported symbols from them.
(elf_i386_finish_dynamic_symbol): Fill in VxWorks PLT static
relocation section. Don't mark _GLOBAL_OFFSET_TABLE_ as absolute on
VxWorks.
(elf_i386_finish_dynamic_sections): Allow different pad bytes.
Add relocation for GOT location. Fill in PLT static relocations.
(elf_i386_vxworks_link_hash_table_create): New function.
(elf_i386_vxworks_link_output_symbol_hook): New function.
* elf-vxworks.h: New file.
gas/
* config/tc-i386.h (ELF_TARGET_FORMAT): Define for TE_VXWORKS.
gas/testsuite/
* gas/i386/i386.exp: Don't run divide test on vxworks.
ld/
* Makefile.am: Add eelf_i386_vxworks.
* Makefile.in: Regenerate.
* configure.tgt: Make i?86-*-vxworks use targ_emul=elf_i386_vxworks.
* emulparams/elf_i386_vxworks.sh: New file.
* emulparams/vxworks.sh: New file.
* scripttempl/elf.sc: Add DATA_END_SYMBOLS and ETEXT_NAME.
list traversal. Use bfd_section_list_prepend.
* config/tc-mmix.c (mmix_frob_file): Don't needlessly iterate
over the section list.
* config/tc-xtensa.c (xtensa_remove_section): Delete.
(xtensa_insert_section): Delete.
(xtensa_move_seg_list_to_beginning): Use bfd_section_list_remove
and bfd_section_list_prepend.
(xtensa_reorder_seg_list): Use bfd_section_list_remove and
bfd_section_list_insert_after.
2005-04-26 H.J. Lu <hongjiu.lu@intel.com>
* config/obj-multi.h (FAKE_LABEL_NAME): Defined.
* read.c (pseudo_set): Disallow symbol set to common symbol.
PR 857
* write.c (write_object_file): Report common symbol name when
disallowing local symbol set to common symbol.
(adjust_reloc_syms): Disallow local symbol set to undefined
symbol.
gas/testsuite/
2005-04-26 H.J. Lu <hongjiu.lu@intel.com>
* gas/all/assign.s: Make `x' and `y' global.
(xg_is_narrow_insn, xg_expand_narrow): Remove. Merge into...
(xg_is_single_relaxable_insn): ...here. Add "targ" and "narrow_only"
parameters.
(xg_assembly_relax, xg_find_narrowest_format, relaxation_requirements,
convert_frag_narrow): Use new version of xg_is_single_relaxable_insn.
* config/tc-i386.c (md_begin): Allow hyphens in mnemonics.
include/opcode/ChangeLog:
* i386.h: Insert hyphens into selected VIA PadLock extensions.
Add xcrypt-ctr. Provide aliases without hyphens.
opcodes/ChangeLog:
* i386-dis.c: Insert hyphens into selected VIA PadLock extensions.
Add xcrypt-ctr.
2005-04-15 Jan Beulich <jbeulich@novell.com>
* config/obj-elf.c (obj_elf_struct): New.
(elf_pseudo_table). Use it for .offset and .struct.
gas/testsuite/
2005-04-15 Jan Beulich <jbeulich@novell.com>
* gas/elf/struct.[sd]: New.
* gas/elf/elf.exp: Run new test.
* config/tc-mips.c (IS_ZEXT_32BIT_NUM): New macro.
(normalize_address_expr): New function to sign-extend address
offsets that fit into 32 bits in 32-bit mode.
(macro_build_ldst_constoffset): Use normalize_address_expr()
instead of a handcoded sequence.
(load_register): Likewise. Report oversized numbers in a useful
way.
(macro) [ld_st, ldd_std]: Reject all oversized offsets, not only
for constant addresses. Report oversized numbers in a useful way.
(mips_ip): Use normalize_address_expr() for addresses.
gas/testsuite/:
* gas/mips/ldstla-32.s: Exclude offsets that are now meant to fail
and include more instructions/offsets that are meant to succeed.
Use $4 instead $3 to avoid register dependencies.
* gas/mips/ldstla-32.d: Update accordingly.
* gas/mips/ldstla-32-shared.d: Likewise.
* gas/mips/ldstla-32-mips3.d: New test based on the above, except
for mips3.
* gas/mips/ldstla-32-mips3-shared.d: Similarly, for PIC.
* gas/mips/ldstla-32-mips3.s: Source for the new tests.
* gas/mips/ldstla-32-1.s: New test for offsets that are meant to
fail.
* gas/mips/ldstla-32-mips3-1.s: Likewise, for mips3.
* gas/mips/ldstla-32-1.l: Stderr output for the new test.
* gas/mips/ldstla-32-mips3-1.l: Likewise.
* gas/mips/mips.exp: Run the new tests.
* i386.h (i386_optab): Mark VIA PadLock instructions as ImmExt and
adjust them accordingly.
gas/ChangeLog:
* config/tc-i386.c (output_insn): Handle VIA PadLock instructions
similar to other instructions now that they're marked as ImmExt.
(xtensa_find_unaligned_branch_targets, get_aligned_diff,
future_alignment_required): Use branch_align_power to check section
alignment as well as xtensa_fetch_width when aligning branch targets.
2005-04-04 H.J. Lu <hongjiu.lu@intel.com>
* elf.c (bfd_elf_set_group_contents): Ignore linker created
group section.
(assign_section_numbers): Accept link_info. Check SHT_GROUP
sections for relocatable files only. Remove the linker created
group sections.
(_bfd_elf_compute_section_file_positions): Pass link_info to
assign_section_numbers.
* elfxx-ia64.c (elfNN_ia64_object_p): New.
(elf_backend_object_p): Defined.
gas/
2005-04-04 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-ia64.c (start_unwind_section): Undo the change
of 2004-08-18.
(generate_unwind_image, dot_endp): Likewise.
* config/tc-ia64.c (ia64_handle_align): Move le_nop and
le_nop_stop arrays and initializers to file scope.
(md_begin): When generating code for anything other than
Itanium 1, use MMI instead of MFI NOP bundles as a filler.
2005-04-01 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (md_apply_fix3): Also handle BFD_RELOC_X86_64_32S.
(tc_gen_reloc): Handle BFD_RELOC_X86_64_32S in the default case.
gas/testsuite/
2005-04-01 Jan Beulich <jbeulich@novell.com>
* gas/i386/x86-64-pcrel.[sd]: New.
* gas/i386/i386.exp: Run new test.
* bfd/bfd-in2.h: Regenerate.
* bfd/elf32-arm.c (elf32_arm_is_target_special_symbol): Rename call to
bfd_elf32_is_arm_mapping_symbol_name.
(elf32_arm_output_symbol_hook): Likewise.
(arm_elf_find_function): Likewise, and include STT_NOTYPE in test for
mapping symbols.
(is_arm_mapping_symbol_name): Function moved from here...
* bfd/cpu-arm.c (bfd_elf32_is_arm_mapping_symbol_name): ...to here,
renamed and made global.
* gas/config/tc-arm.c (mapping_state): Change documentation in function
comment to cross-reference spec instead. Change type of mapping symbols
to BSF_NO_TYPE.
(arm_adjust_symtab): Don't change type of mapping symbols here.
* gas/testsuite/gas/arm/mapping.d: Update expected output.
* ld/testsuite/ld-arm/arm-app-abs32.d: Likewise.
* ld/testsuite/ld-arm/arm-app.d: Likewise.
* ld/testsuite/ld-arm/mixed-app.d: Likewise.
indicates whether personality routine index N has been output for this
section.
(mapping_state): tc_segment_info_data now struct not enum.
(arm_elf_change_section): Likewise, and marked_pr_dependency is now
handled on section change.
(create_unwind_entry): Previous code to output dependency removed.
(s_arm_unwind_fnend): Output dependency if it hasn't been done already
for this section.
* gas/config/tc-arm.h (TC_SEGMENT_INFO_TYPE): Redefined as struct
arm_segment_info_type.
(arm_segment_info_type): New struct.
* gas/testsuite/gas/arm/unwind.d: Update expected output.
(xtensa_frob_label): Compute "freq" before possibly switching frags.
Insert a LOOP_END frag before every loop target, and do not overload
DESIRE_ALIGN_IF_TARGET frags with loop end information.
(xg_assemble_vliw_tokens): Use do_align_targets.
(xtensa_fix_target_frags): Remove code to convert a
DESIRE_ALIGN_IF_TARGET frag to a LOOP_END frag when there is a
negatable branch at the end of a loop.
(frag_can_negate_branch): Delete.
(xg_symbolic_immeds_fit): Check for direct calls and return TRUE if
the use_longcalls flag is set. Do this before checking the segment.
(xg_expand_assembly_insn): Rearrange to use new do_expand flag. Never
expand direct calls at this point.
(xtensa_set_frag_assembly_state): Set use_longcalls flag.
(xtensa_find_unmarked_state_frags): Likewise.
(md_assemble): Do not disable longcalls by setting is_specific_opcode.
(xg_assemble_vliw_tokens): Switch frags when use_longcalls changes.
(convert_frag_immed): Remove unnecessary check of is_specific_opcode.
* config/tc-xtensa.h (xtensa_frag_type): Add use_longcalls flag.
* config/tc-cris.c: Ditto.
(md_estimate_size_before_relax): Remove obsolete comment for
parameter "segment_type".
(md_begin): Document reason for cast of hash_insert argument.
(md_atof): Correct type of parameter "type".
xg_apply_fix_value and return a value to indicate success.
(md_pcrel_from): Skip check of fx_done. Return 0 if not PC-relative.
(xtensa_force_relocation): Remove checks for VTABLE relocs.
(xtensa_validate_fix_sub): New.
(xtensa_fix_adjustable): Remove check for external or weak symbols.
(tc_gen_reloc): Move code to handle difference of symbols and code to
apply tentative fix values to ...
(md_apply_fix3): ...here. Enable standard overflow checks for simple
8, 16, and 32 bit relocations. Apply fixes for slot-specific
relocations when linkrelax flag is not set.
* config/tc-xtensa.h (xtensa_validate_fix_sub): Add prototype.
(TC_FORCE_RELOCATION_SUB_SAME, TC_VALIDATE_FIX_SUB): Define.
2005-03-17 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (i386_scale): Beautify error message.
(Intel syntax comments): Update.
(struct intel_parser_s): Add fields in_offset, in_bracket, and
next_operand.
(intel_e04_1, intel_e05_1, intel_e05_1, intel_e09_1, intel_e10_1):
Remove declarations.
(intel_bracket_expr): Declare.
(i386_intel_operand): Initialize new intel_parser fields. Wrap most
of the function body in a loop allowing to split an operand into two.
Replace calls to malloc and checks of it returning non-NULL with
calls to xmalloc/xstrdup.
(intel_expr): SHORT no longer handled here. Add comment indicating
comparison ops need implementation.
(intel_e04, intel_e04_1): Combine, replace recursion with loop.
Check right operand of - does not specify a register when parsing
the address of a memory reference.
(intel_e05, intel_e05_1): Combine, replace recursion with loop.
Check operands do not specify a register when parsing the address of
a memory reference.
(intel_e06, intel_e06_1): Likewise.
(intel_e09, intel_e09_1): Combine, replace recursion with loop. Also
handle SHORT as well as unary + and -. Don't accept : except for
segment overrides or in direct far jump/call insns.
(intel_brack_expr): New.
(intel_e10, intel_e10_1): Combine, replace recursion with loop. Use
intel_brack_expr.
(intel_e11): Replace chain of if/else-if by switch, alloing fall-
through in certain cases. Use intel_brack_expr. Add new diagnostics.
Allow symbolic constants as register scale value.
(intel_get_token): Replace call to malloc and check of return value
with call to xmalloc. Change handling for FLAT to match MASM's.
(intel_putback_token): Don't try to back up/free current token if
that is T_NIL.
gas/testsuite/
2005-03-17 Jan Beulich <jbeulich@novell.com>
* gas/i386/intel.d: Add stderr directive.
* gas/i386/intel.e: New.
* gas/i386/intel16.d: Add stderr directive. Adjust for changed
source.
* gas/i386/intel16.e: New.
* gas/i386/intel16.s: Add instances of addressing forms with base
and index specified in reverse order.
* gas/i386/intelbad.l: Adjust for changed source.
* gas/i386/intelbad.s: Add more operand forms to check.
* gas/i386/intelok.d: Remove -r from objdump options. Add stderr
directive. Adjust for changed source.
* gas/i386/intelok.e: New.
* gas/i386/intelok.s: Define MASM constants byte, word, etc. Add
more operand forms to check.
* gas/i386/x86_64.d: Add stderr directive.
* gas/i386/x86_64.e: New.
* gas/i386/x86_64.s: Adjust for parser changes.
(MAX_NOPS): Bump to 4.
(mips_fix_vr4130): New variable.
(nops_for_vr4130): New function.
(nops_for_insn): Use MAX_DELAY_NOPS rather than MAX_NOPS. Use
nops_for_vr4130 if working around VR4130 errata.
(OPTION_FIX_VR4130, OPTION_NO_FIX_VR4130): New macros.
(md_longopts): Add -mfix-vr4130 and -mno-fix-vr4130.
(md_parse_option): Handle them.
(md_show_usage): Print them.
* doc/c-mips.texi: Document -mfix-vr4130 and -mno-fix-vr4130.
(history): Resize to 1 + MAX_NOPS.
(fix_vr4120_class): New enumeration.
(vr4120_conflicts): New variable.
(init_vr4120_conflicts): New function.
(md_begin): Call it.
(insn_uses_reg): Constify first argument.
(classify_vr4120_insn, insns_between, nops_for_insn, nops_for_sequence)
(nops_for_insn_or_target): New functions.
(append_insn): Use the new nops_for_* functions instead of inline
delay checks. Generalize prev_nop_frag handling to handle an
arbitrary history length. Insert nops into the history buffer
once the number of nops in prev_nop_frag is fixed.
(emit_delays): Use nops_for_insn instead of inline delay checks.
(nop_insn, mips16_nop_insn): New variables.
(NOP_INSN): New macro.
(insn_length, create_insn, install_insn, move_insn, add_fixed_insn)
(add_relaxed_insn, insert_into_history, emit_nop): New functions.
(md_begin): Initialize nop_insn and mips16_nop_insn.
(append_insn): Use the new emit_nop function to add nops, recording
them in the history buffer. Use add_fixed_insn or add_relaxed_insn
to reserve room for the instruction and install_insn to install the
final form. Use insert_into_history to record the instruction in
the history buffer. Use move_insn to do delay slot filling.
(mips_emit_delays): Use add_fixed_insn instead of the emit_nop macro.
(macro_build, mips16_macro_build, macro_build_lui, mips_ip)
(mips16_ip): Use create_insn to initialize mips_cl_insns.
(EXTRACT_OPERAND, MIPS16_INSERT_OPERAND, MIPS16_EXTRACT_OPERAND): New.
(insn_uses_reg, reg_needs_delay, append_insn, macro_build)
(mips16_macro_build, macro_build_lui, mips16_macro, mips_ip)
(mips16_ip): Use the new macros instead of explicit masks and shifts.
2005-03-08 Jan Beulich <jbeulich@novell.com>
* config/tc-ia64.c (emit_one_bundle): Track last slot user insn was
emitted to. Add more precise diagnostics for non-fitting insns based
on that. Eliminate now superfluous special casing of MLX. Clear out
slot information when dropping an insn.
gas/testsuite/
2005-03-08 Jan Beulich <jbeulich@novell.com>
* gas/ia64/no-fit.[ls]: New.
* gas/ia64/ia64.exp: Run new test.
2005-03-08 Jan Beulich <jbeulich@novell.com>
* config/tc-ia64.c (parse_section_name): Rename to...
(cross_section): In addition to separating the name from the rest of
the arguments, also carry out the operation.
(dot_xdata): Use cross_section.
(dot_float_cons): Likewise.
(dot_xstringer): Likewise.
(dot_xdata_ua): Likewise.
(dot_float_cons_ua): Likewise. Pass float_cons, not stmt_float_cons.
gas/testsuite/
2005-03-08 Jan Beulich <jbeulich@novell.com>
* gas/ia64/xdata.[sd], gas/ia64/xdata-ilp32.d: New.
* gas/ia64/ia64.exp: Run new tests.
* elfxx-mips.c (mips_elf_calculate_relocation): Handle special
'__gnu_local_gp' symbol used by gas -mno-shared.
gas/ChangeLog
* config/tc-mips.c (macro_build_lui): Use '__gnu_local_gp'
instead of '_gp' for -mno-shared optimization.
(s_cpload): Ditto.
(s_abicalls): Document it in the comment.
(md_show_usage): Document the -mno-shared option.
gas/testsuite/ChangeLog
* gas/mips/elf-rel23b.d: Use '__gnu_local_gp' instead of '_gp'
for -mno-shared optimization.
* gas/mips/elf-rel25a.d: Ditto.
ld/testsuite/ChangeLog
* ld-mips-elf/multi-got-no-shared-1.s,
ld-mips-elf/multi-got-no-shared-2.s,
ld-mips-elf/multi-got-no-shared.d: New tests.
* ld-mips-elf/mips-elf.exp: Run them.
(mips_opts): Initialize it.
(HAVE_32BIT_ADDRESSES): Set to true if pointers are 32 bits wide.
(HAVE_64BIT_ADDRESSES): Redefine as !HAVE_32BIT_ADDRESSES.
(HAVE_32BIT_SYMBOLS, HAVE_64BIT_SYMBOLS): New macros.
(load_address): Use HAVE_64BIT_SYMBOLS instead of HAVE_64BIT_ADDRESSES
when deciding whether to use a symbolic %highest/%higher expansion.
(macro): Likewise. Remove o64/n32 linux hack. Always use
ADDRESS_ADD*_INSN for address addition in the expansion of "dla"
and "la". Handle constants separately from symbolic expressions in
the "ld_st:" case, using 64-bit arithmetic if HAVE_64BIT_ADDRESSES
and using load_register to load the high part of the address.
(OPTION_MSYM32, OPTION_NO_MSYM32): New macros.
(OPTION_ELF_BASE): Bump by 2.
(md_longopts): Add entries for -msym32 and -mno-sym32.
(md_parse_option): Handle them.
(usage): Document them.
(s_mipsset): Handle ".set sym32" and ".set nosym32".
(s_cpload, s_cpsetup): Use HAVE_64BIT_SYMBOLS instead of
HAVE_64BIT_ADDRESSES to detect 64-bit values of "_gp".
* doc/c-mips.texi: Document ".set sym32", ".set nosym32",
-msym32 and -mno-sym32.
for 64bit address space non-PIC. Fix formatting.
(macro): Likewise. Simplify code.
(md_parse_option): Don't bail out if -G 0 is set for PIC code.
(mips_after_parse_args): Simplify code.
%dtprel_lo, %tprel_hi, %tprel_lo, and %gottprel.
(parse_relocation): Check for a word break after a relocation
operator.
(md_apply_fix3): Handle TLS relocations, and mark thread-local
symbols.
2005-03-02 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (intel_e11): If not followed by T_PTR, treat T_BYTE
etc. like normal symbol references (T_ID).
gas/testsuite/
2005-03-02 Jan Beulich <jbeulich@novell.com>
* gas/i386/intelok.d: Add -r to objdump options. Adjust expectations.
* gas/i386/intelok.s: Add checks for various special memory operands.
* ld-mips-elf/reloc-merge-lo16.d: Correct symbol
table size for __start.
2005-02-22 Eric Christopher <echristo@redhat.com>
* config/tc-mips.c (struct proc): Change isym to
func_sym. New member func_end_sym.
(s_mips_ent): Update.
(s_mips_end): Ditto. Add code to compute function size.
* config/tc-mips.c (append_insn): Call dwarf2_emit_insn() before
emitting insn.
gas/testsuite/:
* gas/mips/mips16-dwarf2.d: New test to check DWARF2 line
information for MIPS16.
* gas/mips/mips16-dwarf2.s: Source for the new test.
* gas/mips/mips.exp: Run the new test.
