_initialize_am64fbsd_nat.
* gdbarch.sh (DEPRECATED_REG_STRUCT_HAS_ADDR): Add comment.
(stabs_argument_has_addr): New architecture method.
* arch-utils.h (default_stabs_argument_has_addr): New prototype.
* arch-utils.c: Include "buildsym.h".
(default_stabs_argument_has_addr): New function.
* stabsread.c (define_symbol): Use stabs_argument_has_addr
instead of DEPRECATED_REG_STRUCT_HAS_ADDR.
registers since gdb will not operate correctly without this. Restore include
file ordering munged in previous change.
* config/i386/tm-cygwin.h: Remove HAVE_SSE_REGS define.
defined by the system headers.
* config/i386/tm-cygwin.h: Check for CONTEXT_EXTENDED_REGISTERS rather than
HAVE_CONTEXT_EXTENDED_REGISTERS, since the latter actually exists.
symbol types are, by definition, in the .data section, so it is
correct to use SECT_OFF_DATA (objfile) here, not data_sect_index.
If there is no .data section, there should be no N_DATA or N_DATA
| N_EXT symbols.
* top.c (quit_target): New static helper function.
(quit_force): Moved code to quit_target(). Call quit_target()
via catch_errors() to catch errors during quit.
* rs6000-tdep.c (rs6000_push_dummy_call): Use
regcache_raw_write_signed to set SP_REGNUM, move the operation to
near the function's end.
(rs6000_gdbarch_init): Do not set "deprecated_dummy_write_sp".
* ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call): Use
regcache_raw_write_signed to set SP_REGNUM.
* dwarf2read.c (dwarf2_build_psymtabs_hard): Move lowpc and
highpc initialization here out of scan_partial_symbols.
(scan_partial_symbols): Restructure into a recursive version,
calling add_partial_namespace and add_partial_enumeration when
appropriate.
(add_partial_namespace): New.
(add_partial_enumeration, locate_pdi_sibling): Ditto.
* rs6000-tdep.c (ppc_push_return_address): Delete function.
(rs6000_push_dummy_call): Set LR to BP_ADDR.
(rs6000_gdbarch_init): Do not set deprecated_push_return_address.
* ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call): Ditto.
* rs6000-tdep.c (rs6000_gdbarch_init): Do not set the deprecated
methods "max_register_raw_size", "max_register_virtual_size" or
"register_virtual_size".
The old method would drag in the entire array, then look for the
single element. This method just gets the right element out instead.
Saves memory, and saves a crash for array with (*) as one of the
dimensions when it would previously have allocated (unsigned int) -1 bytes.
(sh64-tdep.o): Add dependencies.
* configure.tgt: Add FIXME to sh-*-linux*.
* sh-tdep.c: Move sh64 support to sh64-tdep.c.
(sh_gdbarch_init): Always set correct sh_show_regs function
pointer. Call sh64_gdbarch_init() if machine type is sh5.
* sh-tdep.h: Move sh64 support to sh64-tdep.c.
* sh64-tdep.c: New file, containing all sh64 related code from
sh-tdep.c.
* config/sh/embed.mt (TDEPFILES): Add sh64-tdep.o.
* config/sh/linux.mt (TDEPFILES): Ditto.
* config/sh/nbsd.mt (TDEPFILES): Ditto.
* config/sh/tm-sh.h: Drop REGISTER_TYPE definition.
* config/sh/wince.mt (TDEPFILES): Ditto.
"gdb_assert.h". Various coding style fixes.
(derive_stack_segment, derive_heap_segment): Replace check for
non-null BOTTOM and TOP with gdb_assert.
(derive_heap_segment): Replace check for successful creation of
ZERO with gdb_assert.
(make_mem_sec): Use bfd_section_lma to set OSEC->lma.
* thread-db.c (verbose_dlsym): New function.
(thread_db_load): Use verbose_dlsym
(thread_db_new_objfile): Print that libthread_db was loaded, and
that thread debugging was enabled.
* disasm.c (fprintf_disasm): New function.
(gdb_disassemble_info): Call "init_disassemble_info", instead of
INIT_DISASSEMBLE_INFO_NO_ARCH. Do not initialize "insn_sets",
reverts 2003-08-14 change.
(_initialize_disasm): Call "init_disassemble_info", instead of
INIT_DISASSEMBLE_INFO_NO_ARCH.
arm_frame_chain. Take NEXT_FRAME and CACHE arguments.
Use the cache instead of DEPRECATED_FRAME_SAVED_PC.
(arm_minimal_frame_info): Renamed from arm_init_extra_frame_info.
Take NEXT_FRAME and CACHE arguments. Call
FRAMELESS_FUNCTION_INVOCATION instead of checking FROMLEAF argument.
Set unwound_pc in CACHE instead of modifying the frame argument.
Don't bother checking the frame type when looking for sigtramp
frames.
(arm_make_prologue_cache, arm_frame_chain)
(arm_init_extra_frame_info): New functions.
(struct arm_prologue_cache): Renamed from frame_extra_info. Add
unwound_sp, unwound_pc, and saved_regs.
(thumb_scan_prologue): Take a cache instead of the frame.
(arm_scan_prologue): Likewise.
(arm_frame_chain): Create a temporary cache for arm_scan_prologue
instead of a temporary frame.
(arm_init_extra_frame_info): Allocate and use a cache.
(arm_frame_saved_pc, arm_pop_frame): Use the cache.
Only define PTRACE_GET_THREAD_AREA is not already defined.
Various style fixes in code and comments and some additional
spelling fixes in comments. Move after functions dealing with
debug registers.
* x86-64-linux-nat.c (ps_get_thread_area): Don't define as extern.
Fix coding-style.
* x86-64-linux-nat.c: Include "i386-linux-tdep.h" and "amd64.h".
Change "register array" to "register cache" in comments.
(x86_64_linux_gregset64_reg_offset): New variable.
(GETREGS_SUPPLIES): Remove macro.
(supply_gregset): Call amd64_supply_native_gregset instead of
x86_64_linux_supply_gregset.
(fill_gregset): Rename `regno' to `regnum'. Call
amd64_collect_native_gregset instead of x86_64_linux_fill_gregset.
(store_regs): Rename `regno' to `regnum'.
(store_fpregs): Rename `regno' to `regnum'.
(fetch_inferior_registers): Rename `regno' to `regnum'. Use
amd64_native_gregset_supplies_p instead of GREGSET_SUPPLIES.
Reorganize function a bit.
(store_inferior_registers): Rename `regno' to `regnum'. Use
amd64_native_gregset_supplies_p instead of GREGSET_SUPPLIES.
Reorganize function a bit.
(_initialize_x86_64_linux_nat): New function.
* config/i386/x86-64linux.mh.
* amd64-nat.c: New file.
* amd64fbsd-nat.c: Include "amd64-nat.h".
(REG_ADDR, GETREGS_SUPPLIES): Remove macros.
(amd64fbsd32_r_reg_offset): New variable.
(supply_gregset): Simply call amd64_supply_native_gregset.
(fill_gregset): Rename `regno' to `regnum'. Simply call
amd64_collect_native_gregset.
(fill_fpregset): Rename `regno' to `regnum'.
(fetch_inferior_registers): Rename `regno' to `regnum'. Replace
usage of GETREGS_SUPPLIES with amd64_native_gregset_supplies_p.
Use `struct reg' and `struct fpreg' instead of `gregset_t' and
`fpregset_t'. Call amd64_supply_native_gregset instead of
supply_gregset. Call x86_64_supply_fxsave instead of
supply_fpregset.
(store_inferior_registers): Rename `regno' to `regnum'. Replace
usage of GETREGS_SUPPLIES with amd64_native_gregset_supplies_p.
Use `struct reg' and `struct fpreg' instead of `gregset_t' and
`fpregset_t'. Call amd64_collect_native_gregset instead of
fill_gregset. Call x86_64_collect_fxsave instead of
fill_fpregset.
(_initialize_am64fbsd_nat): Initialize
amd64_native_gregset32_reg_offset and
amd64_native_gregset64_reg_offset.
* config/i386/fbsd64.mh (NATDEPFILES): Add amd64-nat.o.
* mips-tdep.c (gdb_print_insn_mips): Set the disassembler's
flavour and disassembler options.
(_initialize_mips_tdep): Do not set deprecated_tm_print_insn.
(mips_gdbarch_init): Set "print_insn". Delete initialization of
deprecated_tm_print_insn_info.
* Makefile.in (cris-tdep.o): Update dependencies.
* cris-tdep.c: Include "gdb_assert.h".
(cris_gdbarch_init): Set print_insn.
(_initialize_cris_tdep): Do not set deprecated_tm_print_insn.
(cris_delayed_get_disassembler): Simplify, directly call the
disassembler returned by cris_get_disassembler.
* hppa-tdep.c (hppa_gdbarch_init): Set print_insn.
(_initialize_hppa_tdep): Do not set deprecated_tm_print_insn.
* ns32k-tdep.c (ns32k_gdbarch_init): Set print_insn.
(_initialize_ns32k_tdep): Do not set deprecated_tm_print_insn.
* mn10300-tdep.c (mn10300_gdbarch_init): Set print_insn.
(_initialize_mn10300_tdep): Do not set deprecated_tm_print_insn.
* mcore-tdep.c (mcore_gdbarch_init): Set print_insn.
(_initialize_mcore_tdep): Do not set deprecated_tm_print_insn.
* frv-tdep.c (frv_gdbarch_init): Set print_insn.
(_initialize_frv_tdep): Do not set deprecated_tm_print_insn.
* sparc-tdep.c (sparc_gdbarch_init): Set print_insn.
(gdb_print_insn_sparc): Delete function.
(_initialize_sparc_tdep): Do not set deprecated_tm_print_insn or
deprecated_tm_print_insn_info.
* v850-tdep.c (v850_gdbarch_init): Set print_insn.
(_initialize_v850_tdep): Do not set deprecated_tm_print_insn.
(v850_gdbarch_init): Do not set deprecated_tm_print_insn_info.
* xstormy16-tdep.c (xstormy16_gdbarch_init): Set print_insn.
(_initialize_xstormy16_tdep): Do not set deprecated_tm_print_insn.
* s390-tdep.c (gdb_print_insn_s390): Delete function.
(_initialize_s390_tdep): Do not set deprecated_tm_print_insn.
(s390_gdbarch_init): Set print_insn.
* ppc-linux-tdep.c (ppc64_call_dummy_address): Delete function.
(ppc_linux_init_abi): For PPC64, do not set call_dummy_address.
* infcall.c (call_function_by_hand): Convert the entry point
address into a code address.
(enable_break): Pass SEC_CODE as the SECT_FLAGS argument to
bfd_lookup_symbol, since we only want symbols in code sections.
(look_for_base): Pass zero as the SECT_FLAGS argument to
bfd_lookup_symbol, since we're not concerned about which section
the symbol is in.
* ia64-tdep.c (pseudo_regs): New enum that lists gr32-gr127, p0-p63,
bof, and nat0-nat127 as pseudo-registers.
(ia64_frame_cache): New struct used to cache frame info.
(ia64_register_reggroup_p): New routine used to override default
register grouping so registers without names are still saved and
restored.
(ia64_dwarf_reg_to_regnum): New routine to map gr32-gr127 to their
pseudo values.
(ia64_pseudo_register_read): New routine to read pseudo-registers.
(ia64_pseudo_register_write): New routine to write pseudo-registers.
(ia64_alloc_frame_cache): New routine to create a new
ia64_frame_cache.
(examine_prologue): Change prototype to add next_frame pointer.
Assume frameless until otherwise proven. Verify that the cfm for
current frame matches the cfm that should occur for the prologues
alloc insn and if equal, mark as not frameless. At end of routine,
if not frameless, calculate registers for the previous frame and store
in the cache, if a cache is provided.
(ia64_skip_prologue): Use new prototype when calling examine_prologue
and pass 0 for next_frame.
(ia64_store_return_value): Change to use convert_typed_floating()
instead of calling ia64_convert_to_raw().
(ia64_extract_return_value): Change to use convert_typed_floating()
instead of calling ia64_convert_to_virtual().
(ia64_frame_cache): New routine to support new frame model.
(ia64_frame_this_id, ia64_frame_prev_register): Ditto.
(ia64_frame_sniffer): Ditto.
(ia64_sigtramp_frame_init_saved_regs): Ditto.
(ia64_sigtramp_frame_cache, ia64_sigtramp_frame_this_id): Ditto.
(ia64_sigtramp_frame_prev_register): Ditto.
(ia64_sigtramp_frame_sniffer): Ditto.
(ia64_frame_base_address): Ditto.
(ia64_extract_struct_value_address): Change to issue error message.
(ia64_frame_align): New routine to align sp.
(ia64_push_dummy_call): New routine based on ia64_push_arguments().
(ia64_push_arguments): Removed. Logic moved to
ia64_push_dummy_call().
(ia64_push_return_address): Ditto.
(ia64_unwind_dummy_id): New function.
(ia64_unwind_pc): Ditto.
(ia64_convert_register_p): Ditto.
(ia64_register_to_value): Ditto.
(ia64_value_to_register): Ditto.
(ia64_pop_frame, ia64_pop_frame_regular): Removed.
(ia64_register_byte, ia64_register_raw_size): Ditto.
(ia64_register_virtual_size, ia64_register_virtual_byte): Ditto.
(ia64_saved_pc_after_call): Ditto.
(ia64_frame_chain, ia64_frame_saved_pc): Ditto.
(ia64_frame_init_saved_regs, ia64_get_saved_register): Ditto.
(ia64_register_convertible, ia64_register_convert_to_virtual): Ditto.
(ia64_register_convert_to_raw): Ditto.
(ia64_store_struct_return, ia64_call_dummy_words): Ditto.
(ia64_init_extra_frame_info): Ditto.
(ia64_frame_args_address, ia64_frame_locals_address): Ditto.
(ia64_gdbarch_init): Remove registering of deprecated functions that
are no longer used. Add registration of new gdbarch functions.
Remove registering deprecated_write_sp. Replace
set_gdbarch_register_virtual_type() with set_gdbarch_register_type().
Delete set_gdbarch_deprecated_register_convertible(),
set_gdbarch_deprecated_register_convert_to_virtual(), and
set_gdbarch_deprecated_register_convert_to_raw() calls. Remove
set_gdbarch_deprecated_register_size(),
set_gdbarch_deprecated_register_bytes(),
set_gdbarch_pcregnum(),
set_gdbarch_deprecated_register_byte(),
set_gdbarch_deprecated_register_raw_size(),
set_gdbarch_deprecated_max_register_raw_size(),
set_gdbarch_deprecated_register_virtual_size(),
and set_gdbarch_deprecated_max_register_virtual_size() calls.
Replace set_gdbarch_deprecated_extract_return_value() with
set_gdbarch_extract_return_value(). Remove calls to:
set_gdbarch_deprecated_saved_pc_after_call();
set_gdbarch_deprecated_frame_chain(),
set_gdbarch_deprecated_frame_saved_pc(),
set_gdbarch_deprecated_frame_init_saved_regs(),
set_gdbarch_deprecated_get_saved_register(),
set_gdbarch_deprecated_call_dummy_words(),
set_gdbarch_deprecated_sizeof_call_dummy_words(),
set_gdbarch_deprecated_init_extra_frame_info(),
set_gdbarch_deprecated_frame_args_address(),
set_gdbarch_deprecated_frame_locals_address(),
and set_gdbarch_deprecated_dummy_write_sp().
Add set_gdbarch_convert_register_p(),
set_gdbarch_register_to_value(),
set_gdbarch_value_to_register(),
set_gdbarch_push_dummy_call(),
set_gdbarch_frame_align(),
set_gdbarch_unwind_dummy_id(),
set_gdbarch_unwind_pc(),
frame_unwind_append_sniffer(),
frame_unwind_append_sniffer(),
and frame_base_set_default().
* configure.tgt: Document need for special "mipsisa64" handling.
(mipsisa64*-*-linux64): Handle as target linux64.
(mipsisa64*-*-*): Handle as target embed64.
(set_screen_size): New prototype.
(init_page_info): Simplify by fetching the screen size from
Readline. Call set_screen_size.
(set_screen_size): New function.
(set_width): Add missing whitespace in comment.
(set_width_command): Call set_screen_size.
(set_height_command): New function.
(initialize_utils): Fix formatting. Make "set height" command
call set_height_command. Remove redundant code that turns off
pagination if output isn't a terminal. Remove redundant call to
set_width_command.
(sparc64_supply_rwindow, sparc64_fill_rwindow): Remove prototypes.
(sparc_supply_rwindow, sparc_fill_rwindow): New prototypes.
* sparc64-tdep.c (sparc64_pseudo_register_read): Add missing
`case' keyword.
(sparc64_register_info): Give the reister with number
SPARC64_STATE_REGNUM a name.
(sparc64_pseudo_register_write): Add support for %cwp, %pstate,
%asi and %ccr.
(sparc64_push_dummy_call): Take BIAS into account when checking
stcak alignment.
(sparc_software_single_step): Remove assertions that check whether
NPC and NNPC were zero.
(sparc_supply_rwindow): Make public. Merge functionality with
sparc64_supply_rwindow.
(sparc_fill_rwindow): Make public. Merge functionality with
sparc64_fill_rwindow.
(sparc64_supply_rwindow, sparc64_fill_rwindow): Remove.
* sparc64fbsd-nat.c (_initialize_sparc64fbsd_nat): Set
SPARCBSD_FPREG_SUPPLIES_P to sparc64fbsd_fpreg_supplies_p.
* sparc64fbsd-tdep.c (sparc64fbsd_supply_reg): Call
sparc_supply_rwindow instead of sparc64_supply_rwindow.
(register_objfile_data, set_objfile_data, objfile_data): New
prototypes.
* objfiles.c (objfile_alloc_data, objfile_free_data): New
prototypes.
(allocate_objfile): Call objfile_alloc_data.
(free_objfile): Call objfile_free_data.
(struct objfile_data): New.
(struct objfile_data_registration): New.
(struct objfile_data_registry): New.
(objfile_data_registry): New variable.
(register_objfile_data): New function.
(objfile_alloc_data, objfile_free_data): New functions.
(set_objfile_data, objfile_data): New functions.
* dwarf2-frame.c (dwarf2_frame_data): New variable.
(dwarf2_frame_find_fde, add_fde): Use new per-objfile data mechanism.
(_initialize_dwarf2_frame): New function and prototype.
* tracepoint.c (trace_dump_command): Trace break address
is subject to DECR_PC_AFTER_BREAK.
(set_traceframe_context): Make "trace_line" an int.
Fixes suggested by Mark Newman <mark.newman@lmco.com>
* sh-tdep.h (struct gdbarch_tdep): New member FLOAT_ARGLAST_REG.
* sh-tdep.c (sh_gdbarch_init): For sh2e, sh3e, and sh4, set
FLOAT_ARG0_REGNUM and FLOAT_ARGLAST_REGNUM, to be used for
argument passing.
(sh_push_dummy_call_fpu, sh_push_dummy_call_nofpu): New
functions, replace sh_push_dummy_call.
(sh_gdbarch_init): Set push_dummy_call to one of new methods.
2003-08-18 Andrew Cagney <cagney@redhat.com>
* gdbarch.sh (FRAME_RED_ZONE_SIZE): New architecture method.
* gdbarch.h, gdbarch.c: Re-generate.
* infcall.c (call_function_by_hand): Adjust the SP by
frame_red_zone_size before allocating any stack space.
* rs6000-tdep.c (rs6000_gdbarch_init): Set "frame_red_zone_size".
* x86-64-tdep.c (x86_64_frame_align): New function.
(x86_64_init_abi): Set "frame_red_zone_size" and "frame_align".
* x86-64-tdep.c (x86_64_push_arguments): Revert 2003-08-07 change.
Remove code adjusting SP so that it skips over the Red Zone.
Index: doc/ChangeLog
2003-08-18 Andrew Cagney <cagney@redhat.com>
* gdbint.texinfo (Target Architecture Definition): Document
"frame_red_zone_size".
* m68hc11-tdep.c (m68hc11_gdbarch_init): Do not set
"dwarf2_build_frame_info". Append "m68k_frame_sniffer" instead of
"m68k_frame_p".
(m68hc11_frame_sniffer): Replace "m68hc11_frame_p".
* config/i386/nm-linux.h (LINUX_CHILD_POST_STARTUP_INFERIOR): Define.
* config/nm-linux.h (CHILD_POST_STARTUP_INFERIOR, CHILD_POST_ATTACH)
(CHILD_FOLLOW_FORK, KILL_INFERIOR): Define.
* i386-linux-nat.c: Include "linux-nat.h".
(child_post_startup_inferior): New function.
* i386-nat.c (child_post_startup_inferior): Wrap in #ifdef.
* infptrace.c (kill_inferior): Wrap in #ifdef.
* lin-lwp.c (lin_lwp_attach_lwp): Call child_post_attach after
attaching to each LWP.
(child_wait, lin_lwp_wait): Call linux_handle_extended_wait.
(init_lin_lwp_ops): Fill in some more operations.
* linux-nat.h (linux_enable_event_reporting)
(linux_handle_extended_wait, linux_child_post_startup_inferior): New
prototypes.
* linux-nat.c (linux_enable_event_reporting): New function.
(child_post_attach, linux_child_post_startup_inferior)
(child_post_startup_inferior, child_follow_fork)
(linux_handle_extended_wait, kill_inferior): New functions.
* hppa-tdep.h: New file.
* hppa-tdep.c: #include hppa-tdep.c.
(hppa32_num_regs): Renamed from hppa_num_regs.
(hppa64_num_regs): New constant.
(hppa64_call_dummy_breakpoint_offset): New constant.
(hppa32_call_dummy_length): New constant.
(hppa64_call_dummy_length): New constant.
(hppa32_stack_align): Make name 32bit explicit.
(hppa32_register_virtual_type): Likewise.
(hppa32_extract_return_value): Likewise.
(hppa32_use_struct_convention): Likewise.
(hppa32_store_return_value): Likewise.
(hppa64_register_virtual_type): New function.
(hppa64_extract_return_value): New function.
(hppa64_use_struct_convention): New function.
(hppa64_store_return_value): New function.
(hppa_frame_locals_address): Remove declaration, function does
not exist anymore.
(hppa_register_byte): Add support for PA64 ABI.
(hppa_gdbarch_init): Add support for PA64 ABI.
* hppa-hpux-tdep.c (hppa32_hpux_frame_saved_pc_in_sigtramp):
Make name 32bit explicit.
(hppa32_hpux_frame_base_before_sigtramp): Likewise.
(hppa32_hpux_frame_find_saved_regs_in_sigtramp): Likewise.
(hppa64_hpux_frame_saved_pc_in_sigtramp): New function.
(hppa64_hpux_frame_base_before_sigtramp): New function.
(hppa64_hpux_frame_find_saved_regs_in_sigtramp): New function.
* config/pa/tm-hppa64.h: Remove macros that are no longer
necessary now that the gdbarch vector is properly setup.
Transform some macros into function calls. Some minor cleanup.
* config/pa/tm-hppah.h: Update function calls in macros
following the function renaming in hppa-hpux-tdep.c.
* Makefile.in (hppa_tdep_h): New variable.
(hppa-tdep.o): Add dependency over hppa_tdep_h.
* Makefile.in (dsrec.o): Update dependencies.
* dsrec.c: Include "gdb_assert.h".
(make_srec): Use snprintf instead of sprintf, use a literal format
string.
* gdb.disasm/8300s.s: Fix syntax of bsr insn.
* gdb.disasm/h8300s.exp : Minor changes in disassembler output require
patterns to be more general, accepting old and new output.
Some output chars (such as '+') also must be quoted.
Some addresses are displayed numerically instead of
symbolically.
instead of frame_read_register.
(i386_fetch_pointer_argument): Use get_frame_register_unsigned
instead of frame_read_register. Use I386_ESP_REGNUM instead of
SP_REGNUM.
(i386_frame_prev_register): Use frame_unwind_register_unsigned
instead of frame_unwind_unsigned_register. Use
I386_EFLAGS_REGISTER instead of PS_REGNUM.
(i386_get_longjmp_target): Use regcache_read_unsigned_register
instead of read_register. Use builtin_type_void_data_ptr instead
of builtin_type_void_func_ptr when extracting the address of the
jmp_buf.
(i386_extract_return_value, i386_store_return_value,
i386_pseudo_register_read, i386_pseudo_register_write): Use
register_size instead REGISTER_RAW_SIZE.
(i387_print_float_info): Use get_frame_register and
get_frame_register_unsigned instead of frame_register_read.
(child_resume): Make `eflags' an ULONGEST. Use
regcache_cooked_read_unsigned and regcache_cooked_write_unsigned
instead of register_read and register_write.
Fix GDB PR cli/926.
* cli/cli-decode.c (add_setshow_uinteger_cmd): New function.
* command.h (add_setshow_uinteger_cmd): Declare.
* frame.c (set_backtrace_cmd): New function.
(show_backtrace_cmd): New function.
* frame.c (_initialize_frame): Replace "set/show
backtrace-below-main" with "set/show backtrace past-main". Add
command "set/show backtrace limit".
(backtrace_past_main): Rename "backtrace_below_main".
(backtrace_limit): New variable.
(get_prev_frame): Update. Check the backtrace_limit.
2003-08-09 Andrew Cagney <cagney@redhat.com>
* gdb.texinfo (Backtrace): Replace "set/show backtrace-below-main"
with "set/show backtrace past-main" and "set/show backtrace
limit".
Index: doc/gdb.texinfo
===================================================================
RCS file: /cvs/src/src/gdb/doc/gdb.texinfo,v
retrieving revision 1.174
diff -u -r1.174 gdb.texinfo
--- doc/gdb.texinfo 8 Aug 2003 01:58:00 -0000 1.174
+++ doc/gdb.texinfo 9 Aug 2003 14:57:10 -0000
@@ -3922,27 +3922,40 @@
value, indicating that your program has stopped at the beginning of the
code for line @code{993} of @code{builtin.c}.
-@kindex set backtrace-below-main
-@kindex show backtrace-below-main
+@kindex set backtrace past-main
+@kindex show backtrace past-main
+@kindex set backtrace limit
+@kindex show backtrace limit
-Most programs have a standard entry point---a place where system libraries
-and startup code transition into user code. For C this is @code{main}.
-When @value{GDBN} finds the entry function in a backtrace it will terminate
-the backtrace, to avoid tracing into highly system-specific (and generally
-uninteresting) code. If you need to examine the startup code, then you can
-change this behavior.
+Most programs have a standard user entry point---a place where system
+libraries and startup code transition into user code. For C this is
+@code{main}. When @value{GDBN} finds the entry function in a backtrace
+it will terminate the backtrace, to avoid tracing into highly
+system-specific (and generally uninteresting) code.
+
+If you need to examine the startup code, or limit the number of levels
+in a backtrace, you can change this behavior:
@table @code
-@item set backtrace-below-main off
+@item set backtrace past-main
+@itemx set backtrace past-main on
+Backtraces will continue past the user entry point.
+
+@item set backtrace past-main off
Backtraces will stop when they encounter the user entry point. This is the
default.
-@item set backtrace-below-main
-@itemx set backtrace-below-main on
-Backtraces will continue past the user entry point to the top of the stack.
+@item show backtrace past-main
+Display the current user entry point backtrace policy.
+
+@item set backtrace limit @var{n}
+@itemx set backtrace limit 0
+@cindex backtrace limit
+Limit the backtrace to @var{n} levels. A value of zero means
+unlimited.
-@item show backtrace-below-main
-Display the current backtrace policy.
+@item show backtrace limit
+Display the current limit on backtrace levels.
@end table
@node Selection
* interps.c (interp_set): Check for a NULL "old_interp".
Index: mi/ChangeLog
2003-08-08 Andrew Cagney <cagney@redhat.com>
* mi-main.c (captured_mi_execute_command): Add "mi2" and "mi3" to
interpreters that hack around CLI.
* mi-interp.c (mi3_command_loop): New function.
(mi_interpreter_resume): Check for "mi3", default to "mi2".
2003-08-08 H.J. Lu <hongjiu.lu@intel.com>
* Makefile.in (FLAGS_TO_PASS): Add DESTDIR.
(install-only): Support DESTDIR.
(uninstall): Likewise.
(install-gdbtk): Likewise.
gdb/doc/
2003-08-08 H.J. Lu <hongjiu.lu@intel.com>
* Makefile.in (install-info): Support DESTDIR.
(install-html): Likewise.
gdb/gdbserver/
2003-08-08 H.J. Lu <hongjiu.lu@intel.com>
* Makefile.in (install-only): Create dest dir. Support DESTDIR.
(uninstall): Support DESTDIR.
mmalloc/
2003-08-08 H.J. Lu <hongjiu.lu@intel.com>
* Makefile.in (install-info): Create dest dir. Support DESTDIR.
(install): Likewise.
