If bfd_vma is 32 bits, gcc complains about shift counts exceeding
width of the type.
* config/tc-pdp11.c (md_number_to_chars): Condition nbytes=8 code
on BFD64.
Move divul and divsl to CSKYV2_ISA_3E3R3 instruction set, which is
enabled by ck803r3, and it's still a part of enhance DSP instruction
set.
gas/
* config/tc-csky.c (csky_cpus): Add ck803r3.
(CSKY_ISA_803R3): Define.
(CSKY_ISA_803R2): Refine, use CSKY_ISA_803R1.
include/
* opcode/csky.h (CSKYV2_ISA_3E3R3): Define.
opcodes/
* csky-opc.h (csky_v2_opcodes): Move divul and divsl
to CSKYV2_ISA_3E3R3 instruction set.
PR 26420
PR 26421
PR 26425
PR 26427
* config/tc-arm.c (struct arm_it): Make size, size_req, cond and
uncond_value unsigned.
(parse_vfp_reg_list): Make setmask unsigned, vpr_str_len size_t.
(parse_big_immediate): Cast generic_bignum elements to unsigned.
(encode_thumb32_immediate): Shift left 0xffU.
(double_to_single): Make sign unsigned. Tidy.
(move_or_literal_pool): Cast LITTLE_NUM elements to uint64_t or
valueT.
(vfp_or_neon_is_neon): Adjust inst.uncond_value expression.
(md_assemble): Likewise.
(handle_pred_state): Make cond unsigned.
(thumb32_negate_data_op): Make variables unsigned.
(md_apply_fix): Make value and newval unsigned, adjust uses.
This also fixes the packing of the nibble buffer, which contains
rubbish in the top 4 bits of each element.
PR 26510
* config/tc-z8k.c (buffer): Use unsigned char.
(apply_fix): Use unsigned char* pointers.
(build_bytes): Likewise and mask nibbles when packing.
When looking at the UB errors, I noticed that cbitb_test.d disassembly
wasn't reproducing the input assembly. That turned out to be an error
in make_argument case arg_cr. This fixes that and makes some general
tidies.
opcodes/
* cr16-dis.c: Formatting.
(parameter): Delete struct typedef. Use dwordU instead
throughout file.
(make_argument <arg_idxr>): Simplify detection of cbitb, sbitb
and tbitb.
(make_argument <arg_cr>): Extract 20-bit field not 16-bit.
gas/
* testsuite/gas/cr16/cbitb_test.d: Update expected output.
* testsuite/gas/cr16/cbitw_test.d: Likewise.
* testsuite/gas/cr16/sbitb_test.d: Likewise.
* testsuite/gas/cr16/sbitw_test.d: Likewise.
* testsuite/gas/cr16/storb_test.d: Likewise.
* testsuite/gas/cr16/storw_test.d: Likewise.
* testsuite/gas/cr16/tbitb_test.d: Likewise.
* testsuite/gas/cr16/tbitw_test.d: Likewise.
Always use unsigned constants in expressions generating masks. The
following trys mightily to avoid UB (but hits it anyway with bits=32
and 0x7fffffff << 1), and worse, for 32-bit int, 64-bit long, bits=32
doesn't generate 0xffffffff.
max = ((((1 << (bits - 1)) - 1) << 1) | 1);
results in -1, or max = 0xffffffffffffffff.
This patch fixes that problem, a possible shift exponent of -1U,
removes some dead code, and makes general tidies.
PR26437
PR26438
* config/tc-cr16.c: Include limits.h, formatting.
(CR16_PRINT): Wrap params in parentheses. Remove parens from uses
throughout file.
(getconstant): Handle zero nbits.
(print_operand): Simplify handling of index regs.
(check_range): Use int32_t variables. Correct range checks.
parse_args uses getopt_long_only so it can handle long options both
with double and single dash. But this means that some single dash
options like -gdwarf-1 don't generate an error (unlike --gdwarf-1).
This is especially confusing since there is also --gdwarf2, but no
--gdwarf4 (it is --gdwarf-4). When giving -gdwarf4 the option is
silently interpreted as -g (which set dwarf_version to 2). This causes
some confusion for people who don't expect this and suddenly get
DWARF2 instead of DWARF4 as they might expect.
So make it so that the -gdwarf<unknown> creates an error, just like
--gdwarf<unknown> would.
Besides avoiding the UB, this also makes right shifts inside
expression symbols unsigned, consistent with the way gas evaluates
expressions in source.
PR 26448
* symbols.c: Include limits.h.
(resolve_symbol_value <O_left_shift, O_right_shift>): Do an
unsigned shift. Warn if shift count larger than valueT size.
This patch adds support for xBPF, another ISA targetting the BPF
virtual architecture. For now, the primary difference between eBPF
and xBPF is that xBPF supports indirect calls through the
'call %reg' form of the call instruction.
bfd/
* archures.c (bfd_mach_xbpf): Define.
* bfd-in2.h: Regenerate.
* cpu-bpf.c (bfd_xbpf_arch) New.
(bfd_bpf_arch) Update next in list field to point to xbpf arch.
cpu/
* bpf.cpu (arch bpf): Add xbpf mach and isas.
(define-xbpf-isa) New pmacro.
(all-isas) Add xbpfle,xbpfbe.
(endian-isas): New pmacro.
(mach xbpf): New.
(model xbpf-def): Likewise.
(h-gpr): Add xbpf mach.
(f-dstle, f-srcle, dstle, srcle): Add xbpfle isa.
(f-dstbe, f-srcbe, dstbe, srcbe): Add xbpfbe isa.
(define-alu-insn-un): Use new endian-isas pmacro.
(define-alu-insn-bin, define-alu-insn-mov): Likewise.
(define-endian-insn, define-lddw): Likewise.
(dlind, dxli, dxsi, dsti): Likewise.
(define-cond-jump-insn, define-call-insn): Likewise.
(define-atomic-insns): Likewise.
gas/
* config/tc-bpf.c: Add option -mxbpf to select xbpf isa.
* testsuite/gas/bpf/indcall-1.d: New file.
* testsuite/gas/bpf/indcall-1.s: Likewise.
* testsuite/gas/bpf/indcall-bad-1.l: Likewise.
* testsuite/gas/bpf/indcall-bad-1.s: Likewise.
* testsuite/gas/bpf/bpf.exp: Run new tests.
opcodes/
* bpf-desc.c: Regenerate.
* bpf-desc.h: Likewise.
* bpf-opc.c: Likewise.
* bpf-opc.h: Likewise.
* disassemble.c (disassemble_init_for_target): Set bits for xBPF
ISA when appropriate.
Some versions of gcc with -Werror=format-overflow complain about using
a perfectly good 7 char buffer for "r%dr%d" when the int is between 0
and 64, apparently not seeing the value range.
note: __builtin___sprintf_chk output between 5 and 24 bytes into a destination of size 7
* config/tc-arc.c (declare_register_set): Avoid false positive
format-overflow warning.
* config/tc-epiphany.c (md_assemble): Likewise.
* config/tc-mips.c (md_begin): Likewise.
* config/tc-mmix.c (mmix_md_begin): Likewise.
* config/tc-nds32.c (nds32_elf_append_relax_relocs): Avoid false
positive "may be used uninitialized" warning.
A number of the tic54x tests were failing, and I thought it worth
investigating since the target makes use of a lot of hash tables, and
we've just changed gas hash tables. It turns out none of the gas
failures were due to hashing.
* config/tc-tic54x.c (stag_add_field_symbols): Don't free "name"
in case where it isn't copied.
* config/tc-tic54x.h (LOCAL_LABELS_FB): Undef.
* testsuite/gas/tic54x/field.d: Dump section contents and symbols
rather than disassembling.
* testsuite/gas/tic54x/set.d: Adjust for newer disassembly.
