Next to code using %ymm<N> or %zmm<N> it is more natural to have .cfi_*
directives also reference those, not the corresponding %xmm<N>. Accept
their names as kind of aliases, i.e. resolving to the same numbers.
While extending the respective 64-bit testcase, also add %bnd<N> there
(should have happened right with 633789901c ["x86-64: Dwarf2 register
numbers for %bnd<N>"], sorry), requiring binutils/dwarf.c to be adjusted
accordingly as well.
On big endian hosts (eg. s390x) the windmc tool fails to parse even
trivial files:
$ cat test.mc
;
$ ./binutils/windmc ./test.mc
In test.mc at line 1: parser: syntax error.
In test.mc at line 1: fatal: syntax error.
The tool starts by reading the input as Windows CP1252 and then
converting it internally into an array of UTF-16LE, which it then
processes as an array of unsigned short (typedef unichar).
There are lots of ways this is wrong, but in the specific case of big
endian machines the little endian pairs of bytes are byte-swapped.
For example, the ';' character in the input above is first converted
to UTF16-LE byte sequence { 0x3b, 0x00 }, which is then cast to
unsigned short. On a big endian machine the first unichar appears to
be 0x3b00. The lexer is unable to recognize this as the comment
character ((unichar)';') and so parsing fails.
The simple fix is to convert the input to UTF-16BE on big endian
machines (and do the reverse conversion when writing the output).
Fixes: https://sourceware.org/bugzilla/show_bug.cgi?id=31283
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
dwarf.c can hit "Assertion '(start) <= (end)' failed" on truncated
sections, due to get_encoded_eh_value wrongly returning a full count
for truncated words.
* dwarf.c (get_encoded_eh_value): Return zero for truncated words.
PR ld/31289 tests failed for fr30-elf, frv-elf, ft32-elf, iq2000-elf,
mn10200-elf, ms1-elf and msp430-elf targets:
FAIL: ld-elf/fatal-warnings-2a
FAIL: ld-elf/fatal-warnings-2b
FAIL: ld-elf/fatal-warnings-3a
FAIL: ld-elf/fatal-warnings-3b
FAIL: ld-elf/fatal-warnings-4a
FAIL: ld-elf/fatal-warnings-4b
even though PR ld/31289 targets xfail for [is_generic] targets. These
targets not only don't use the generic_link_hash_table linker, but also
don't use the standard ELF emulation. Add is_standard_elf for ELF
targets which use the standard ELF emulation and replace [is_generic]
with ![is_standard_elf] in PR ld/31289 tests.
binutils/
PR ld/31289
* testsuite/lib/binutils-common.exp (is_standard_elf): New.
ld/
PR ld/31289
* testsuite/lib/binutils-common.exp (is_generic): Return 1 for
fr30-*-*, frv-*-elf, ft32-*-*, iq2000-*-*, mn10200-*-*,
moxie-*-moxiebox*, msp430-*-* and mt-*-*.
* testsuite/ld-elf/fatal-warnings-2a.d: Replace [is_generic]
with ![is_standard_elf].
* testsuite/ld-elf/fatal-warnings-2b.d: Likewise.
* testsuite/ld-elf/fatal-warnings-3a.d: Likewise.
* testsuite/ld-elf/fatal-warnings-3b.d: Likewise.
* testsuite/ld-elf/fatal-warnings-4a.d: Likewise.
* testsuite/ld-elf/fatal-warnings-4b.d: Likewise.
GCC 14 will warn about calling calloc with swapped size and count
arguments.
binutils/srconv.c: In function ‘nints’:
binutils/srconv.c:598:36: error: ‘xcalloc’ sizes specified with ‘sizeof’ in the earlier argument and not in the later argument [-Werror=calloc-transposed-args]
598 | return (int *) (xcalloc (sizeof (int), x));
| ^~~
binutils/srconv.c:598:36: note: earlier argument should specify number of elements, later size of each element
binutils/
* srconv.c (nints): Swap xcalloc arguments.
(wr_du): Likewise.
(wr_dus): Likewise.
GCC 14 will warn about calling calloc with swapped size and count
arguments.
binutils-gdb/binutils/coffgrok.c: In function ‘do_sections_p1’:
binutils-gdb/binutils/coffgrok.c:116:72: error: ‘xcalloc’ sizes specified with ‘sizeof’ in the earlier argument and not in the later argument [-Werror=calloc-transposed-args]
116 | struct coff_section *all = (struct coff_section *) (xcalloc (sizeof (struct coff_section),
| ^~~~~~
binutils-gdb/binutils/coffgrok.c:116:72: note: earlier argument should specify number of elements, later size of each element
binutils/
* coffgrok.c (empty_scope): Swap xcalloc arguments.
(empty_symbol): Likewise.
(do_lines): Likewise.
(doit): Likewise.
(coff_grok): Likewise.
Adds two new external authors to etc/update-copyright.py to cover
bfd/ax_tls.m4, and adds gprofng to dirs handled automatically, then
updates copyright messages as follows:
1) Update cgen/utils.scm emitted copyrights.
2) Run "etc/update-copyright.py --this-year" with an extra external
author I haven't committed, 'Kalray SA.', to cover gas testsuite
files (which should have their copyright message removed).
3) Build with --enable-maintainer-mode --enable-cgen-maint=yes.
4) Check out */po/*.pot which we don't update frequently.
Define NT_X86_SHSTK which is the note for x86 Shadow Stack (SHSTK) to
support Intel SHSTK in Linux kernel.
For now only userspace shadow stack and kernel IBT are supported by the
linux kernel. This note should be used instead of NT_X86_CET introduced
in the commit "x86: Add NT_X86_CET note", as it is outdated and only
used by old binutils versions.
Fix the ENOTDIR rmdir too.
PR 31191
* objcopy.c (copy_archive): Localise uses of "l". Remove
const from name_list.name. Unlink output element on bfd_close
error, and NULL list->name to indicate file is removed. Adjust
cleanup to prevent rmdir on non-existent file.
Print instruction description as comment in disassembly with s390
architecture specific option "insndesc":
- For objdump it can be enabled with option "-M insndesc"
- In gdb it can be enabled with "set disassembler-options insndesc"
Since comments are not column aligned the output can enhanced for
readability by postprocessing using a filter such as "expand":
... | expand -t 8,16,24,32,40,80
Or when using in combination with objdump option --visualize-jumps:
... | expand | sed -e 's/ *#/\t#/' | expand -t 1,80
Note that the instruction descriptions add about 128 KB to s390-opc.o:
s390-opc.o without instruction descriptions: 216368 bytes
s390-opc.o with instruction descriptions : 348432 bytes
binutils/
* NEWS: Mention new s390-specific disassembler option
"insndesc".
include/
* opcode/s390.h (struct s390_opcode): Add field to hold
instruction description.
opcodes/
* s390-mkopc.c: Copy instruction description from s390-opc.txt
into generated operation code table s390-opc.tab.
* s390-opc.c (s390_opformats): Provide NULL as description in
.insn pseudo-mnemonics opcode table.
* s390-dis.c: Add s390-specific disassembler option "insndesc"
and optionally print the instruction description as comment in
the disassembly when it is specified.
gas/
* testsuite/gas/s390/s390.exp: Add new test disassembly test
case "zarch-insndesc".
* testsuite/gas/s390/zarch-insndesc.s: New test case for s390-
specific disassembler option "insndesc".
* testsuite/gas/s390/zarch-insndesc.d: Likewise.
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Andreas Krebbel <krebbel@linux.ibm.com>
Commit b05efa39b4 removed checks I added in commit f22f27f46c to
prevent segfaults when debug_info_p is NULL, which can be the case
with fuzzed objects. Restore those checks. Also, for dwo look at
rnglists_dwo rather than rnglists.
Prior to commit 0e3c1eebb2 nm output depended on the host unsigned
long when printing "negative" symbol values for 32-bit targets.
Commit 0e3c1eebb2 made the output match that seen with a 64-bit host
unsigned long. The fact that nm output changed depending on host is
of course a bug, but it is reasonable to expect 32-bit target output
is only 32 bits. So this patch makes 32-bit target output the same as
it was on 32-bit hosts prior to 0e3c1eebb2.
PR 31096
* nm.c (print_format_string): Make it a static buffer.
(get_print_format): Merge into..
(set_print_format): ..this, renamed from set_print_width. When
print_width is 32, set up print_format_string for an int32_t
value. Don't malloc print_format_string. Adjust calls.
(print_value): Correct printing of 32-bit values.
This adds the efi target name handling for riscv64 to objcopy.
binutils:
* binutils/objcopy.c: add riscv64 handling to
convert_efi_target()
Signed-off-by: Peter Jones <pjones@redhat.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
While working on gdb's .debug_names writer, I found a couple of small
bugs in binutils .debug_names dumping.
First, the DWARF spec (section 6.1.1.4.6 Name Table) says:
These two arrays are indexed starting at 1, [...]
I think it is clearer for binutils to follow this, particularly
because DW_IDX_parent refers to this number.
Second, I think the handling of an empty hash table is slightly wrong.
Currently the dumping code assumes there is always an array of hashes.
However, section 6.1.1.4.5 Hash Lookup Table says:
The optional hash lookup table immediately follows the list of
type signatures.
and then:
The hash lookup table is actually two separate arrays: an array of
buckets, followed immediately by an array of hashes.
My reading of this is that the hash table as a whole is optional, and
so the hashes will not exist in this case. (This also makes sense
because the hashes are not useful without the buckets anyway.)
This patch fixes both of these problems. FWIW I have some gdb patches
in progress that change gdb both to omit the hash table and to use
DW_IDX_parent.
2023-12-04 Tom Tromey <tom@tromey.com>
* dwarf.c (display_debug_names): Handle empty .debug_names hash
table. Name entries start at 1.
Add support for jump visualization for the s390 architecture in
disassembly:
objdump -d --visualize-jumps ...
Annotate the (conditional) jump and branch relative instructions with
information required for jump visualization:
- jump: Unconditional jump / branch relative.
- condjump: Conditional jump / branch relative.
- jumpsr: Jump / branch relative to subroutine.
Unconditional jump and branch relative instructions are annotated as
jump.
Conditional jump and branch relative instructions, jump / branch
relative on count/index, and compare and jump / branch relative
instructions are annotated as condjump.
Jump and save (jas, jasl) and branch relative and save (bras, brasl)
instructions are annotated as jumpsr (jump to subroutine).
Provide instruction information required for jump visualization during
disassembly.
The instruction type is provided after determining the opcode.
For non-code it is set to dis_noninsn. Otherwise it defaults to
dis_nonbranch. No annotation is done for data reference instructions
(i.e. instruction types dis_dref and dis_dref2). Note that the
instruction type needs to be provided before printing of the
instruction, as it is used in print_address_func() to translate the
argument value into an address if it is assumed to be a PC-relative
offset. Note that this is never the case on s390, as
print_address_func() is only called with addresses and never with
offsets.
The target of the (conditional) jump and branch relative instructions
is provided during print, when the PC relative operand is decoded.
include/
* opcode/s390.h: Define opcode flags to annotate instruction
class information for jump visualization:
S390_INSTR_FLAG_CLASS_BRANCH, S390_INSTR_FLAG_CLASS_RELATIVE,
S390_INSTR_FLAG_CLASS_CONDITIONAL, and
S390_INSTR_FLAG_CLASS_SUBROUTINE.
Define opcode flags mask S390_INSTR_FLAG_CLASS_MASK for above
instruction class information.
Define helpers for common instruction class flag combinations:
S390_INSTR_FLAGS_CLASS_JUMP, S390_INSTR_FLAGS_CLASS_CONDJUMP,
and S390_INSTR_FLAGS_CLASS_JUMPSR.
opcodes/
* s390-mkopc.c: Add opcode flags to annotate information
for jump visualization: jump, condjump, and jumpsr.
* s390-opc.txt: Annotate (conditional) jump and branch relative
instructions with information for jump visualization.
* s390-dis.c (print_insn_s390, s390_print_insn_with_opcode):
Provide instruction information for jump visualization.
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Andreas Krebbel <krebbel@linux.ibm.com>
Yet once again: Old enough glibc has an (unguarded) declaration of
index() in string.h, which triggers a "shadows a global declaration"
warning with at least some gcc versions.
An earlier patch (commit b05efa39 "readelf..debug-dump=loc displays
bogus base addresses") inadvertently removed support for displaying
.gdb_index v9 sections.
This patch corrects the oversight. I tested this by using readelf on
an appropriate file.
* dwarf.c (display_gdb_index): Restore v9 display code.
PR 31062
* objdump.c (decompressed_dumps): New local variable. (usage): Mention the -z/--decompress option. (long_options): Add --decompress. (dump_section_header): Add "COMPRESSED" to the Flags field of any compressed section. (dump_section): Warn users when dumping a compressed section. (display_any_bfd): Decompress the section if decompressed_dumps is true. (main): Handle the -z/--decompress option.
* NEWS: Mention the new feature.
* doc/binutils.texi: Document the new feature.
* testsuite/binutils-all/objdump.s: Update expected output.
* testsuite/binutils-all/objdump.exp: Add test of -Z -s.
* testsuite/binutils-all/objdump.Zs: New file.
* readelf.c (maybe_expand_or_relocate_section): New function. Contains common code found in dump functions. Adds a note message if a compressed section is not being decompressed. (dump_section_as_strings): Use new function. (dump_section_as_bytes): Likewise.
When compiling hello world and adding a v9 .gdb-index section:
...
$ gcc -g hello.c
$ gdb-add-index a.out
...
readelf shows it as:
...
Shortcut table:
Language of main: unknown: 0
Name of main: ^A
...
The documentation of gdb says about the "Name of main" that:
...
This value must be ignored if the value for the language of main is zero.
...
Implement this approach in display_gdb_index, such that we have instead:
...
Shortcut table:
Language of main: unknown: 0
Name of main: <unknown>
...
Tested on x86_64-linux.
Approved-By: Jan Beulich <jbeulich@suse.com>
The help says that <reserve> and <commit> should be separated by a ","
but the implementation is checking for ".". Having two numbers being
separated by a "." could be confusing, thus adjust the implementation to
match the help syntax.
binutils/ChangeLog:
* objcopy.c (copy_main): Set separator to "," between <reserve>
and <commit> for --heap and --stack.
* doc/binutils.texi: Add <commit> for --heap and --stack.
This patch adds the R_MICROBLAZE_32_NONE relocation type.
This is a 32-bit reloc that stores the 32-bit pc relative
value in two words (with an imm instruction).
Add test case to gas test suite.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michael J. Eager <eager@eagercon.com>
