PR/32298 sframe: no SFrame stack trace info generated for .plt.got
Add support to generate SFrame stack trace info for .plt.got section.
Enhance the current definition of struct elf_x86_sframe_plt to include
initialized SFrame FDE/FREs applicable for .plt.got section. There are
two variants of .plt.got entries: 16 byte and 8 byte.
8 byte:
ff 25 00 00 00 00 jmpq *name@GOTPCREL(%rip)
66 90 xchg %ax,%ax
16 byte:
f3 0f 1e fa endbr64
ff 25 66 2f 00 00 jmpq *name@GOTPCREL(%rip)
66 0f 1f 44 00 00 nopw 0x0(%rax,%rax,1)
For the testcase, define some application symbols such that their PLT
entry is placed in .plt.got and ensure SFrame information is generated
with and without -z ibtplt.
ChangeLog:
PR/32298
* bfd/elf64-x86-64.c (elf_x86_64_link_setup_gnu_properties):
PLT GOT entry size is different for IBT vs non IBT PLTs.
* bfd/elfxx-x86.c (enum dynobj_sframe_plt_type): New enum for
SFRAME_PLT_GOT.
(_bfd_x86_elf_create_sframe_plt): Handle SFRAME_PLT_GOT.
(_bfd_x86_elf_write_sframe_plt): Likewise.
(_bfd_x86_elf_late_size_sections): Likewise.
(_bfd_x86_elf_finish_dynamic_sections): Likewise.
* bfd/elfxx-x86.h (struct elf_x86_sframe_plt): Add new members
to keep information about PLT GOT entries.
(struct elf_x86_link_hash_table): Add support for creating
SFrame section for .plt.got.
* ld/testsuite/ld-x86-64/x86-64.exp: Add new tests.
* ld/testsuite/ld-x86-64/sframe-pltgot-1.d: New test.
* ld/testsuite/ld-x86-64/sframe-pltgot-1.s: New test.
* ld/testsuite/ld-x86-64/sframe-pltgot-2.d: New test.
Fix PR/32296 sframe: wrong SFrame info for pltN and .plt.sec for -z ibtplt
The x86 psABI defines a 2-PLT scheme for IBT which uses .plt and
.plt.sec entries. It was observed that SFrame information for .plt.sec
section was incorrect. The erroneous assumption was that SFrame stack
trace information for .plt.sec with lazy binding is the same as SFrame
stack trace information for .plt with lazy binding. This is corrected
now by initializing a new SFrame PLT helper object
elf_x86_64_sframe_ibt_plt for lazy PLT with IBT.
Add a testcase where linking with -z ibtplt generates .plt.sec entries and
ensure correct SFrame information for it.
ChangeLog:
PR/32296
* bfd/elf64-x86-64.c (elf_x86_64_sframe_ibt_pltn_fre2): New
definition elf_x86_64_sframe_ibt_plt. Use it in
elf_x86_64_sframe_plt.
(elf_x86_64_link_setup_gnu_properties): Lazy IBT PLT entries are
different from lazy PLT.
* bfd/elfxx-x86.c (_bfd_x86_elf_create_sframe_plt): Adjust for
SFrame for IBT PLT.
* ld/testsuite/ld-x86-64/x86-64.exp: Add new test.
* ld/testsuite/ld-x86-64/sframe-ibt-plt-1.d: New test.
While for executables properly aligning sections within the file can be
quite relevant, the same is of pretty little importance for relocatable
object files. Avoid passing "true" into
_bfd_elf_assign_file_position_for_section() when dealing with object
files, but compensate minimally by applying log_file_align in such
cases as a cap to the alignment put in place.
The commits:
e8e10743f7 Add --rosegment option to BFD linker to stop the '-z separate-code' from generating two read-only segments.
bf6d7087de ld: Move the .note.build-id section to near the start of the memory map
place .note.gnu.build-id before text sections when --rosegment is used.
Ignore .note.gnu.build-id when placing orphaned notes if --rosegment and
-z separate-code are used together to avoid putting any note sections
between .note.gnu.build-id and text sections in the same PT_LOAD segment.
PR ld/32191
* ldlang.c (lang_insert_orphan): Ignore .note.gnu.build-id when
placing orphaned notes.
* testsuite/ld-elf/pr23658-1a.d: Pass --no-rosegment to ld.
* testsuite/ld-elf/pr23658-1c.d: Likewise.
* testsuite/ld-elf/pr23658-1e.d: New file.
* testsuite/ld-elf/pr23658-1f.d: Likewise.
* testsuite/ld-i386/i386.exp: Run PR ld/32191 test.
* testsuite/ld-i386/pr32191.d: New file.
* testsuite/ld-x86-64/lam-u48.rd: Updated.
* testsuite/ld-x86-64/lam-u57.rd: Likewise.
* testsuite/ld-x86-64/pr32191-x32.d: New file.
* testsuite/ld-x86-64/pr32191.d: Likewise.
* testsuite/ld-x86-64/pr32191.s: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run PR ld/32191 tests.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
commit 292676c15a
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Thu Feb 13 13:44:17 2020 -0800
x86: Resolve PLT32 reloc aganst local symbol to section
resolved PLT32 relocation against local symbol to section and
commit 2585b7a5ce
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Sun Jul 19 06:51:19 2020 -0700
x86: Change PLT32 reloc against section to PC32
turned PLT32 relocation against section into PC32 relocation. But these
transformations are valid only for PC-relative relocations. Add fx_pcrel
check for PC-relative relocations when performing these transformations
to keep PLT32 relocation in `movq $foo@PLT, %rax`.
gas/
PR gas/32196
* config/tc-i386.c (tc_i386_fix_adjustable): Return fixP->fx_pcrel
for PLT32 relocations.
(i386_validate_fix): Turn PLT32 relocation into PC32 relocation
only if fixp->fx_pcrel is set.
* testsuite/gas/i386/reloc32.d: Updated.
* testsuite/gas/i386/reloc64.d: Likewise.
* testsuite/gas/i386/reloc32.s: Add PR gas/32196 test.
* testsuite/gas/i386/reloc64.s: Likewise.
ld/
PR gas/32196
* testsuite/ld-x86-64/plt3.s: New file.
* testsuite/ld-x86-64/x86-64.exp: Run plt3.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Assembler shouldn't accept invalid TLS instructions, TLS relocations
can only be used with specific instructions as specified in TLS psABI
and linker issues an error when TLS relocations are used with wrong
instructions or format. Since it is inconvenient for gcc to rely on
linker to report errors, adding TLS check in the assembler stage so
that gcc can know TLS errors earlier.
gas/ChangeLog:
PR gas/32022
* config.in: Regenerate.
* config/tc-i386.c
*(enum x86_tls_error_type): New.
*(struct _i386_insn): Added has_gotrel to indicate whether TLS
relocations need to be checked.
(x86_check_tls_relocation): Added a new function to check TLS
relocation.
(x86_report_tls_error): Created a new function to report TLS error.
(i386_assemble): Handle x86_check_tls_relocation.
(lex_got): Set i.has_gotrel.
(OPTION_MTLS_CHECK): Added a new option to contrl TLS check.
(struct option): Ditto.
(md_parse_option): Ditto.
(md_show_usage): Ditto.
* configure.ac: Added a new option to check TLS relocation by
default.
* configure: Regenerated.
* doc/c-i386.texi: Document -mtls-check=.
* testsuite/gas/i386/i386.exp: Added new tests.
* testsuite/gas/i386/ilp32/ilp32.exp: Ditto.
* testsuite/gas/i386/ilp32/reloc64.d: Disable TLS check for it.
* testsuite/gas/i386/ilp32/x32-tls.d: Ditto.
* testsuite/gas/i386/inval-tls.l: Added more test cases.
* testsuite/gas/i386/inval-tls.s: Ditto.
* testsuite/gas/i386/reloc32.d: Disable TLS check for it.
* testsuite/gas/i386/reloc64.d: Ditto.
* testsuite/gas/i386/x86-64-inval-tls.l: Added more test cases.
* testsuite/gas/i386/x86-64-inval-tls.s: Ditto.
* testsuite/gas/i386/x86-64.exp: Added new tests.
* testsuite/gas/i386/ilp32/x32-inval-tls.l: New test.
* testsuite/gas/i386/ilp32/x32-inval-tls.s: Ditto.
* testsuite/gas/i386/ilp32/x86-64-tls.d: Ditto.
* testsuite/gas/i386/tls.d: Ditto.
* testsuite/gas/i386/tls.s: Ditto.
* testsuite/gas/i386/x86-64-tls.d: Ditto.
* testsuite/gas/i386/x86-64-tls.s: Ditto.
ld/ChangeLog:
PR gas/32022
* testsuite/ld-i386/tlsgdesc1.d: Disable TLS check for it.
* testsuite/ld-i386/tlsgdesc2.d: Ditto.
* testsuite/ld-i386/tlsie2.d: Ditto.
* testsuite/ld-i386/tlsie3.d: Ditto.
* testsuite/ld-i386/tlsie4.d: Ditto.
* testsuite/ld-i386/tlsie5.d: Ditto.
* testsuite/ld-i386/tlsgdesc3.d: Ditto.
* testsuite/ld-x86-64/tlsdesc3.d: Ditto.
* testsuite/ld-x86-64/tlsdesc4.d: Ditto.
* testsuite/ld-x86-64/tlsie2.d: Ditto.
* testsuite/ld-x86-64/tlsie3.d: Ditto.
* testsuite/ld-x86-64/tlsie5.d: Ditto.
* testsuite/ld-x86-64/tlsdesc5.d: Ditto.
The commit
bf6d7087de ld: Move the .note.build-id section to near the start of the memory map
moves the .note.build-id section before text sections. When --rosegment
and -z separate-code are used together, the .note.gnu.property section
is placed between the .note.build-id section and text sections in the
same PT_LOAD segment by orphan placement. Pass --no-rosegment to ld for
PR ld/22393 tests to avoid linker test failures.
PR ld/32190
* testsuite/ld-elf/pr22393-2a.rd: Pass --no-rosegment to ld.
* testsuite/ld-elf/pr22393-2b.rd: Likewise.
* testsuite/ld-elf/shared.exp: Pass --no-rosegment to ld when
building pr22393-2 tests.
* testsuite/ld-x86-64/pr22393-3a.rd: Pass --no-rosegment to ld.
* testsuite/ld-x86-64/pr22393-3b.rd: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Pass --no-rosegment to ld when
building pr22393-3 tests.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Disable PIE on PR gas/32189 test, which contains the non-PIE assembly
source, to support GCC defaulted to PIE.
PR gas/32189
* testsuite/ld-x86-64/x86-64.exp: Pass $NOPIE_LDFLAGS to linker
on PR gas/32189 test.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
R_X86_64_GOT64 relocation should never be made section relative. Change
tc_i386_fix_adjustable to return 0 for BFD_RELOC_X86_64_GOT64.
gas/
PR gas/32189
* config/tc-i386.c (tc_i386_fix_adjustable): Return 0 for
BFD_RELOC_X86_64_GOT64.
* testsuite/gas/i386/reloc64.d: Updated.
* testsuite/gas/i386/reloc64.s: Add more tests for R_X86_64_GOT64
and R_X86_64_GOTOFF64.
ld/
PR gas/32189
* testsuite/ld-x86-64/x86-64.exp: Run PR gas/32189 test.
* testsuite/ld-x86-64/pr32189.s: New file.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
TLS descriptor call,
call *x@tlsdesc(%rax)
or
call *x@tlsdesc(%eax)
calls _dl_tlsdesc_return which expects that RAX/EAX points to the TLS
descriptor. Update x86 linker to issue an error with or without TLS
transition.
bfd/
PR ld/32123
* elf32-i386.c (elf_i386_check_tls_transition): Move
R_386_TLS_DESC_CALL to ...
(elf_i386_tls_transition): Here.
* elf64-x86-64.c (elf_x86_64_check_tls_transition): Move.
R_X86_64_TLSDESC_CALL check to ...
(elf_x86_64_tls_transition): Here.
ld/
PR ld/32123
* testsuite/ld-i386/i386.exp: Run tlsgdesc3.
* testsuite/ld-i386/tlsgdesc3.d: New file.
* testsuite/ld-x86-64/tlsdesc5.d: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run tlsdesc5.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Since R_386_TLS_DESC_CALL can only be used with
call *variable@TLSCALL(%eax)
and R_X86_64_TLSDESC_CALL can only be used with
call *variable@TLSCALL(%rax)
update TLS transition error report to display the expected register in
indirect CALL.
bfd/
PR ld/32017
* elfxx-x86.c (_bfd_x86_elf_link_hash_table_create): Initialize
the ax_register field.
(_bfd_x86_elf_link_report_tls_transition_error): Report the
expected register in elf_x86_tls_error_indirect_call error.
* elfxx-x86.h (elf_x86_link_hash_table): Add ax_register.
ld/
PR ld/32017
* testsuite/ld-i386/tlsgdesc2.d: Updated.
* testsuite/ld-i386/tlsgdesc2.s: Change jmp to call via ECX.
* testsuite/ld-x86-64/tlsdesc4.d: Updated.
* testsuite/ld-x86-64/tlsdesc4.s: Change jmp to call via RCX.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Add PR ld/32067 tests with the compiler driver since the -plugin option
is needed to trigger this --oformat binary bug.
PR ld/32067
* testsuite/ld-i386/i386.exp: Run PR ld/32067 test.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-i386/start.s: Add .note.GNU-stack section.
* testsuite/ld-x86-64/pr32067.s: New file.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
It's wrong to have ${srcdir} in run_dump_test "source:" lines, as
run_dump_test adds $srcdir/$subdir/ to the line passed to the shell
except when the source path starts with "./". The tests work
currently because the shell expands ${srcdir} to an empty string.
PR 31728
* testsuite/ld-i386/code16.d: Correct "source:".
* testsuite/ld-x86-64/code16.d: Likewise.
* testsuite/ld-x86-64/rela.d: Likewise.
Testcases like ld-elf/pr19719a.c that
printf ("PASS\n");
on success ought to see the whole output for "string match".
Similarly, the ld-pe/ pdb*.d files shouldn't need to remove the last
newline to match. For most of the testsuite it doesn't matter whether
the trailing newline is present or not, and there are only a few cases
where we need to remove it.
* testsuite/lib/ld-lib.exp (run_host_cmd): Don't regsub away
output trailing newline. Do string trim for gcc/ld version checks.
* testsuite/config/default.exp (plug_so): Do string trim output of
run_host_cmd.
* testsuite/ld-elf/shared.exp (mix_pic_and_non_pic): Adjust
string match to include trailing newline.
* testsuite/ld-i386/i386.exp (undefined_weak): Likewise.
* testsuite/ld-x86-64/x86-64.exp (undefined_weak): Likewise.
* testsuite/ld-plugin/libdep.exp (run_test): Likewise.
* testsuite/ld-plugin/lto.exp (PR ld/28138 run): Likewise.
* testsuite/ld-pe/pdb-strings.d,
* testsuite/ld-pe/pdb-syms1-globals.d,
* testsuite/ld-pe/pdb-syms1-records.d,
* testsuite/ld-pe/pdb-syms1-symbols1.d,
* testsuite/ld-pe/pdb-syms1-symbols2.d,
* testsuite/ld-pe/pdb-syms2-symbols1.d,
* testsuite/ld-pe/pdb-types1-hashlist.d,
* testsuite/ld-pe/pdb-types1-skiplist.d,
* testsuite/ld-pe/pdb-types1-typelist.d,
* testsuite/ld-pe/pdb-types2-hashlist.d,
* testsuite/ld-pe/pdb-types2-skiplist.d,
* testsuite/ld-pe/pdb-types2-typelist.d,
* testsuite/ld-pe/pdb-types3-hashlist.d,
* testsuite/ld-pe/pdb-types3-skiplist.d,
* testsuite/ld-pe/pdb-types3-typelist.d,
* testsuite/ld-pe/pdb1-publics.d,
* testsuite/ld-pe/pdb1-sym-record.d,
* testsuite/ld-pe/pdb2-section-contrib.d,
* testsuite/ld-pe/pdb3-c13-info1.d,
* testsuite/ld-pe/pdb3-c13-info2.d,
* testsuite/ld-pe/pdb3-source-info.d: Add trailing newline.
Skip -z mark-plt tests, which are specific to glibc, on MUSL.
PR ld/31970
* ld/testsuite/ld-x86-64/x86-64.exp: Skip -z mark-plt tests on
MUSL.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
For the SFrame FRE frame-pointer (FP) offset from CFA a 'u' is displayed
if it is unavailable.
For the SFrame FRE return-address (RA) offset from CFA a 'u' was
displayed if the ABI uses a fixed RA offset from CFA. By chance a
'u' was also displayed if the RA offset is unavailable, as the string
buffer was not initialized after formatting the FP offset. Note that it
could not occur that the FP offset was erroneously displayed as RA
offset, as the SFrame format cannot have a FRE with FP offset without
RA offset.
For the FRE RA offset display 'f' if the ABI uses a fixed RA offset
from CFA. Display a 'u' if it is unavailable.
libsframe/
* sframe-dump.c: Display SFrame fixed RA offset as 'f' in dump.
gas/testsuite/
* gas/cfi-sframe/cfi-sframe-common-4.d: Test for RA displayed
either as 'u' (if RA tracking) or as 'f' (fixed RA offset if no
RA tracking).
* gas/cfi-sframe/cfi-sframe-common-5.d: Likewise.
* gas/cfi-sframe/cfi-sframe-common-6.d: Likewise.
* gas/cfi-sframe/cfi-sframe-common-7.d: Likewise.
* gas/cfi-sframe/cfi-sframe-common-8.d: Likewise.
* gas/cfi-sframe/cfi-sframe-x86_64-1.d: Test for RA displayed
as 'f' (fixed RA offset), as x86-64 does not use RA tracking.
* gas/scfi/x86_64/scfi-cfi-sections-1.d: Likewise.
* gas/scfi/x86_64/scfi-dyn-stack-1.d: Likewise.
ld/testsuite/
* ld-x86-64/sframe-plt-1.d: Test for RA displayed as 'f' (fixed
RA offset), as x86-64 does not use RA tracking.
* ld-x86-64/sframe-simple-1.d: Likewise.
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
The SFrame format allows architectures to specify fixed offsets from the
CFA, if any, from which the frame pointer (FP) and/or return address
(RA) may be recovered. These offsets are stored in the SFrame header.
For instance the SFrame generation in the assembler for x86 AMD64
specifies a fixed offset from the CFA, from which the return address
(RA) may be recovered.
When dumping the SFrame header, for instance in readelf/objdump with
option --sframe, do also dump the specified fixed offsets from the CFA,
if any, from which the frame pointer (FP) and return address (RA) may
be recovered.
Update the common SFrame test case verification patterns to allow for
the optional dumping of the CFA fixed FP/RA offsets. Update the x86-
specific SFrame and SCFI test case verification patterns to require a
CFA fixed RA offset of -8.
libsframe/
* sframe-dump.c: Dump CFA fixed FP and RA offsets.
gas/testsuite/
* gas/cfi-sframe/cfi-sframe-common-1.d: Test for optional fixed
FP and RA offsets.
* gas/cfi-sframe/cfi-sframe-common-2.d: Likewise.
* gas/cfi-sframe/cfi-sframe-common-3.d: Likewise.
* gas/cfi-sframe/cfi-sframe-common-4.d: Likewise.
* gas/cfi-sframe/cfi-sframe-common-5.d: Likewise.
* gas/cfi-sframe/cfi-sframe-common-6.d: Likewise.
* gas/cfi-sframe/cfi-sframe-common-7.d: Likewise.
* gas/cfi-sframe/cfi-sframe-common-8.d: Likewise.
* gas/cfi-sframe/cfi-sframe-x86_64-1.d: Test for fixed
RA offset.
* gas/cfi-sframe/common-empty-1.d: Test for optional fixed
FP and RA offsets.
* gas/cfi-sframe/common-empty-2.d: Likewise.
* gas/cfi-sframe/common-empty-3.d: Likewise.
* gas/scfi/x86_64/scfi-cfi-sections-1.d: Test for SFrame fixed
RA offset.
* gas/scfi/x86_64/scfi-dyn-stack-1.d: Likewise.
ld/testsuite/
* ld-x86-64/sframe-plt-1.d: Test for SFrame fixed RA offset.
* ld-x86-64/sframe-simple-1.d: Likewise.
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Linker will resolve an undefined symbol only if it is referenced by
relocation. Unreferenced weak undefined symbols serve no purpose.
Weak undefined symbols appear in the dynamic symbol table only when they
are referenced by dynamic relocation. Mark symbols with relocation and
strip undefined weak symbols if they don't have relocation and aren't
in the dynamic symbol table.
bfd/
PR ld/31652
* elf-bfd.h (elf_link_hash_entry): Add has_reloc.
* elf-vxworks.c (elf_vxworks_emit_relocs): Set has_reloc.
* elflink.c (_bfd_elf_link_output_relocs): Likewise.
(elf_link_output_extsym): Strip undefined weak symbols if they
don't have relocation and aren't in the dynamic symbol table.
ld/
PR ld/31652
* testsuite/ld-elf/elf.exp: Run undefweak tests.
* testsuite/ld-elf/undefweak-1.rd: New file.
* testsuite/ld-elf/undefweak-1a.s: Likewise.
* testsuite/ld-elf/undefweak-1b.s: Likewise.
* testsuite/ld-x86-64/weakundef-1.nd: Likewise.
* testsuite/ld-x86-64/weakundef-1a.s: Likewise.
* testsuite/ld-x86-64/weakundef-1b.s: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run undefweak tests.
Fixes
FAIL: Build mark-plt-1.so
where gcc is built with default --as-needed.
* testsuite/ld-x86-64/x86-64.exp (Build mark-plt-1.so): Pass
--no-as-needed.
Pass --hash-style=both to ld for -z mark-plt tests to support linker
configured with --enable-default-hash-style=gnu.
* testsuite/ld-x86-64/mark-plt-1b-x32.d: Pass --hash-style=both
to ld.
* testsuite/ld-x86-64/mark-plt-1b.d: Likewise.
* testsuite/ld-x86-64/mark-plt-1d-x32.d: Likewise.
* testsuite/ld-x86-64/mark-plt-1d.d: Likewise.
When -z mark-plt is used to add DT_X86_64_PLT, DT_X86_64_PLTSZ and
DT_X86_64_PLTENT, the r_addend field of the R_X86_64_JUMP_SLOT relocation
stores the offset of the indirect branch instruction. However, glibc
versions which don't have this commit in glibc 2.36:
commit f8587a61892cbafd98ce599131bf4f103466f084
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Fri May 20 19:21:48 2022 -0700
x86-64: Ignore r_addend for R_X86_64_GLOB_DAT/R_X86_64_JUMP_SLOT
According to x86-64 psABI, r_addend should be ignored for R_X86_64_GLOB_DAT
and R_X86_64_JUMP_SLOT. Since linkers always set their r_addends to 0, we
can ignore their r_addends.
Reviewed-by: Fangrui Song <maskray@google.com>
won't ignore the r_addend value in the R_X86_64_JUMP_SLOT relocation.
Although this commit has been backported to glibc 2.33/2.34/2.35 release
branches, it is safer to require glibc 2.36 for such binaries.
Extend the glibc version dependency of GLIBC_ABI_DT_RELR for DT_RELR to
also add GLIBC_2.36 version dependency for -z mark-plt on the shared C
library if it provides a GLIBC_2.XX symbol version.
* elflink.c (elf_find_verdep_info): Moved to ...
* elf-bfd.h (elf_find_verdep_info): Here.
(elf_backend_data): Add elf_backend_add_glibc_version_dependency.
(_bfd_elf_link_add_glibc_version_dependency): New function.
(_bfd_elf_link_add_dt_relr_dependency): Likewise.
* elf64-x86-64.c (elf_x86_64_add_glibc_version_dependency):
Likewise.
(elf_backend_add_glibc_version_dependency): New.
* elflink.c (elf_link_add_dt_relr_dependency): Renamed to ...
(elf_link_add_glibc_verneed): This. Modified to support other
glibc dependencies.
(_bfd_elf_link_add_glibc_version_dependency): Likewise.
(_bfd_elf_link_add_dt_relr_dependency): Likewise.
(bfd_elf_size_dynamic_sections): Call
elf_backend_add_glibc_version_dependency instead of
elf_link_add_dt_relr_dependency.
* elfxx-target.h (elf_backend_add_glibc_version_dependency): New.
(elfNN_bed): Add elf_backend_add_glibc_version_dependency.
ld/
* testsuite/ld-x86-64/mark-plt-1a.rd: New file.
* testsuite/ld-x86-64/mark-plt-1b.rd: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run -z mark-plt test for
GLIBC_2.36 dependency.
Adds two new external authors to etc/update-copyright.py to cover
bfd/ax_tls.m4, and adds gprofng to dirs handled automatically, then
updates copyright messages as follows:
1) Update cgen/utils.scm emitted copyrights.
2) Run "etc/update-copyright.py --this-year" with an extra external
author I haven't committed, 'Kalray SA.', to cover gas testsuite
files (which should have their copyright message removed).
3) Build with --enable-maintainer-mode --enable-cgen-maint=yes.
4) Check out */po/*.pot which we don't update frequently.
For
add name@gottpoff(%rip), %reg
mov name@gottpoff(%rip), %reg
add
# define R_X86_64_CODE_4_GOTTPOFF 44
and for
lea name@tlsdesc(%rip), %reg
add
# define R_X86_64_CODE_4_GOTPC32_TLSDESC 45
if the instruction starts at 4 bytes before the relocation offset.
They are similar to R_X86_64_GOTTPOFF and R_X86_64_GOTPC32_TLSDESC,
respectively. Linker can covert GOTTPOFF to
add $name@tpoff, %reg
mov $name@tpoff, %reg
and GOTPC32_TLSDESC to
mov $name@tpoff, %reg
mov name@gottpoff(%rip), %reg
if the instruction is encoded with the REX2 prefix when possible.
bfd/
* elf64-x86-64.c (x86_64_elf_howto_table): Add
R_X86_64_CODE_4_GOTTPOFF and R_X86_64_CODE_4_GOTPC32_TLSDESC.
(R_X86_64_standard): Updated.
(x86_64_reloc_map): Add BFD_RELOC_X86_64_CODE_4_GOTTPOFF
and BFD_RELOC_X86_64_CODE_4_GOTPC32_TLSDESC.
(elf_x86_64_check_tls_transition): Handle R_X86_64_CODE_4_GOTTPOFF
and R_X86_64_CODE_4_GOTPC32_TLSDESC.
(elf_x86_64_tls_transition): Likewise.
(elf_x86_64_scan_relocs): Likewise.
(elf_x86_64_relocate_section): Likewise.
* reloc.c (bfd_reloc_code_real): Add
BFD_RELOC_X86_64_CODE_4_GOTTPOFF and
BFD_RELOC_X86_64_CODE_4_GOTPC32_TLSDESC.
* bfd-in2.h: Regenerated.
* libbfd.h: Likewise.
gas/
* config/tc-i386.c (tc_i386_fix_adjustable): Handle
BFD_RELOC_X86_64_CODE_4_GOTTPOFF and
BFD_RELOC_X86_64_CODE_4_GOTPC32_TLSDESC.
(md_assemble): Handle BFD_RELOC_X86_64_CODE_4_GOTTPOFF.
(output_insn): Don't add empty REX prefix with REX2 prefix.
(output_disp): Handle BFD_RELOC_X86_64_CODE_4_GOTTPOFF and
BFD_RELOC_X86_64_CODE_4_GOTPC32_TLSDESC.
(md_apply_fix): Likewise.
(i386_validate_fix): Generate BFD_RELOC_X86_64_CODE_4_GOTTPOFF or
BFD_RELOC_X86_64_CODE_4_GOTPC32_TLSDESC if ixp->fx_tcbit3 is set.
(tc_gen_reloc): Handle BFD_RELOC_X86_64_CODE_4_GOTTPOFF and
BFD_RELOC_X86_64_CODE_4_GOTPC32_TLSDESC.
* testsuite/gas/i386/x86-64-gottpoff.d: New file.
* testsuite/gas/i386/x86-64-gottpoff.s: Likewise.
* testsuite/gas/i386/x86-64-tlsdesc.d: Likewise.
* testsuite/gas/i386/x86-64-tlsdesc.s: Likewise.
include/
* elf/x86-64.h (elf_x86_64_reloc_type): Add
R_X86_64_CODE_4_GOTTPOFF and R_X86_64_CODE_4_GOTPC32_TLSDESC
ld/
* testsuite/ld-x86-64/tlsbindesc.d: Updated.
* testsuite/ld-x86-64/tlsbindesc.rd: Likewise.
* testsuite/ld-x86-64/tlsbindesc.s: Add R_X86_64_CODE_4_GOTTPOFF
and R_X86_64_CODE_4_GOTPC32_TLSDESC tests.
commit eab996435f
Author: Jan Beulich <jbeulich@suse.com>
Date: Tue Nov 7 13:58:32 2023 +0100
ld/x86: reduce testsuite dependency on system object files
changed some C compiler tests to assembler/linker tests which introduced
2 problems:
1. It broke x32 binutils tests since --64 was passed to assembler, but
-m elf_x86_64 wasn't passed to linker.
2. -nostdlib was passed to C compiler driver to exclude standard run-time
files which should be avoided with -r option for linker tests.
Fix them by passing -m elf_x86_64 to linker and removing -nostdlib for
linker tests with -r.
PR ld/30722
* testsuite/ld-x86-64/x86-64.exp: Pass -m elf_x86_64 to linker
for tests with --64. Remove -nostdlib for tests with -r.
PR ld/30722
Tests looking for certain .note-section recorded properties may not
involve object files from the underlying platform (e.g. via using the C
compiler for linking): Such object files may themselves have similar
note sections, and hence they may influence the overall outcome.
For now convert just the tests known to be affected by crt*.o coming
with "ISA v3 needed" notes. Eventually other tests ought to be
converted, too.
* testsuite/ld-x86-64/property-3.r: Update regexp to allow for targets which support x86-64-v3.
* testsuite/ld-x86-64/property-4.r: Likewise.
* testsuite/ld-x86-64/property-5.r: Likewise.
The PLT entry in executables and shared libraries contains an indirect
branch, like
jmp *foo@GOTPCREL(%rip)
push $index_foo
jmp .PLT0
or
endbr64
jmp *foo@GOTPCREL(%rip)
NOP padding
which is used to branch to the function, foo, defined in another object.
Each R_X86_64_JUMP_SLOT relocation has a corresponding PLT entry.
The dynamic tags have been added to the x86-64 psABI to mark such PLT
entries:
6d824a52a4
Add an x86-64 linker option, -z mark-plt, to mark PLT entries with
#define DT_X86_64_PLT (DT_LOPROC + 0)
#define DT_X86_64_PLTSZ (DT_LOPROC + 1)
#define DT_X86_64_PLTENT (DT_LOPROC + 3)
1. DT_X86_64_PLT: The address of the procedure linkage table.
2. DT_X86_64_PLTSZ: The total size, in bytes, of the procedure linkage
table.
3. DT_X86_64_PLTENT: The size, in bytes, of a procedure linkage table
entry.
and set the r_addend field of the R_X86_64_JUMP_SLOT relocation to the
memory offset of the indirect branch instruction. The dynamic linker
can use these tags to update the PLT section to direct branch.
bfd/
* elf-linker-x86.h (elf_linker_x86_params): Add mark_plt.
* elf64-x86-64.c (elf_x86_64_finish_dynamic_symbol): Set the
r_addend of R_X86_64_JUMP_SLOT to the indirect branch offset
in PLT entry for -z mark-plt.
* elfxx-x86.c (_bfd_x86_elf_size_dynamic_sections): Add
DT_X86_64_PLT, DT_X86_64_PLTSZ and DT_X86_64_PLTENT for
-z mark-plt.
(_bfd_x86_elf_finish_dynamic_sections): Set DT_X86_64_PLT,
DT_X86_64_PLTSZ and DT_X86_64_PLTENT.
(_bfd_x86_elf_get_synthetic_symtab): Ignore addend for
JUMP_SLOT relocation.
(_bfd_x86_elf_link_setup_gnu_properties): Set
plt_indirect_branch_offset.
* elfxx-x86.h (elf_x86_plt_layout): Add plt_indirect_branch_offset.
binutils/
* readelf.c (get_x86_64_dynamic_type): New function.
(get_dynamic_type): Call get_x86_64_dynamic_type.
include/
* elf/x86-64.h (DT_X86_64_PLT): New.
(DT_X86_64_PLTSZ): Likewise.
(DT_X86_64_PLTENT): Likewise.
ld/
* ld.texi: Document -z mark-plt and -z nomark-plt.
* emulparams/elf32_x86_64.sh: Source x86-64-plt.sh.
* emulparams/elf_x86_64.sh: Likewise.
* emulparams/x86-64-plt.sh: New file.
* testsuite/ld-x86-64/mark-plt-1.s: Likewise.
* testsuite/ld-x86-64/mark-plt-1a-x32.d: Likewise.
* testsuite/ld-x86-64/mark-plt-1a.d: Likewise.
* testsuite/ld-x86-64/mark-plt-1b-x32.d: Likewise.
* testsuite/ld-x86-64/mark-plt-1b.d: Likewise.
* testsuite/ld-x86-64/mark-plt-1c-x32.d: Likewise.
* testsuite/ld-x86-64/mark-plt-1c.d: Likewise.
* testsuite/ld-x86-64/mark-plt-1d-x32.d: Likewise.
* testsuite/ld-x86-64/mark-plt-1d.d: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run -z mark-plt tests.
If a linker script does not place the PLT relocations and "normal"
relocations in separate ELF sections, `ld` will currently output incorrect
values for DT_JMPREL and DT_PLTRELSZ - they cover the entire ELF section,
rather than just the PLT relocations
Don't ignore the extent of the BFD section - use the size of the srelplt
BFD section and its offset from the output_secttion
bfd/
PR ld/30787
* elfxx-x86.c (_bfd_x86_elf_finish_dynamic_sections): Use input
section for DT_JMPREL and DT_PLTRELSZ.
ld/
PR ld/30787
* testsuite/ld-i386/i386.exp: Run pr30787.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-i386/pr30787.d: New file.
* testsuite/ld-i386/pr30787.s: Likewise.
* testsuite/ld-i386/pr30787.t: Likewise.
* testsuite/ld-x86-64/pr30787.d: Likewise.
* testsuite/ld-x86-64/pr30787.s: Likewise.
* testsuite/ld-x86-64/pr30787.t: Likewise.
The canonical form to discard all sections not mentioned earlier in
the script is
/DISCARD/ : { *(*) }
not
/DISCARD/ : { *(.*) }
".*" happens to work with the usual section names starting with a dot,
but let's not promote something not quite right.
Many of the reloc error messages have already been converted from
using %C to using %H in ld.bfd, to print section+offset as well as
file/line/function. This catches a few remaining, and changes gold to
do the same.
PR 10957
bfd/
* elf32-sh.c (sh_elf_relocate_section): Use %H in error messages.
gold/
* object.cc (Relocate_info::location): Always report section+offset.
* testsuite/debug_msg.sh: Adjust to suit.
* testsuite/x32_overflow_pc32.sh: Likewise.
* testsuite/x86_64_overflow_pc32.sh: Likewise.
ld/
* emultempl/pe.em (read_addend): Use %H in error message.
* emultempl/pep.em (read_addend): Likewise.
* ldcref.c (check_reloc_refs): Likewise.
* ldmain.c (warning_find_reloc, undefined_symbol): Likewise.
* pe-dll.c (pe_create_import_fixup): Likewise.
* testsuite/ld-cris/undef2.d: Adjust expected output to suit.
* testsuite/ld-cris/undef3.d: Likewise.
* testsuite/ld-elf/shared.exp: Likewise.
* testsuite/ld-i386/compressed1.d: Likewise.
* testsuite/ld-ia64/line.exp: Likewise.
* testsuite/ld-plugin/lto.exp: Likewise.
* testsuite/ld-undefined/undefined.exp: Likewise.
* testsuite/ld-x86-64/compressed1.d: Likewise.
* testsuite/ld-x86-64/line.exp: Likewise.
* testsuite/ld-x86-64/pr27587.err: Likewise.
This patch is aimed at making __bss_start properly aligned with the
first of any bss-style sections following. Most of the work here
involves keeping track of the last output section seen when processing
the linker script.
You can almost align __bss_start properly by using
${RELOCATING+. = ALIGN(${DATA_SDATA-${NO_SMALL_DATA-ALIGNOF(.${SBSS_NAME}) != 0 ? ALIGNOF(.${SBSS_NAME}) : }}${BSS_PLT+ALIGNOF(.plt) != 0 ? ALIGNOF(.plt) : }ALIGNOF(.${BSS_NAME}));}
and changing every place that defines NO_SMALL_DATA to use " ", but
having two .plt sections (marked SPECIAL) on some backends foils that
idea. The problem is that you only want to pick up the following
.plt, not the one preceeding __bss_start in the data segment if the
backend decides that is the proper .plt section.
Perhaps that could be fixed too, but I decided instead to extend the
linker script a little. THIS_SECTION and PREV_SECTION could easily be
added too.
* ld.texi (ALIGNOF, SIZEOF): Update and mention NEXT_SECTION.
* ldexp.c (output_section_find): New function.
(fold_name <ALIGNOF, SIZEOF>): Use output_section_find.
(exp_fold_tree): Add os parameter. Adjust all calls.
(exp_fold_tree_no_dot, exp_get_vma, exp_get_power): Likewise.
* ldexp.h (struct ldexp_control): Add last_os.
(exp_fold_tree, exp_fold_tree_no_dot): Update prototypes.
(exp_get_vma, exp_get_power): Likewise.
* ldlang.c: Pass last output section to expression folder
calls throughout file.
(open_input_bfds): Add os parameter to track last os seen.
(lang_size_sections_1): Rename output_section_statement param
to current_os. Track last os.
(lang_do_assignments_1): Track last os.
* scripttempl/arclinux.sc: Align to ALIGNOF NEXT_SECTION
before defining __bss_start.
* scripttempl/elf.sc: Likewise.
* scripttempl/elf64bpf.sc: Likewise.
* scripttempl/elf64hppa.sc: Likewise.
* scripttempl/elf_chaos.sc: Likewise.
* scripttempl/elfarc.sc: Likewise.
* scripttempl/elfd10v.sc: Likewise.
* scripttempl/elfxtensa.sc: Likewise.
* scripttempl/epiphany_4x4.sc: Likewise.
* scripttempl/iq2000.sc: Likewise.
* scripttempl/mep.sc: Likewise.
* scripttempl/nds32elf.sc: Likewise.
* scripttempl/xstormy16.sc: Likewise.
* testsuite/ld-x86-64/pe-x86-64-5.od: Update expected __bss_start.
* testsuite/ld-x86-64/pe-x86-64-5.rd: Likewise.
