Adds two new external authors to etc/update-copyright.py to cover
bfd/ax_tls.m4, and adds gprofng to dirs handled automatically, then
updates copyright messages as follows:
1) Update cgen/utils.scm emitted copyrights.
2) Run "etc/update-copyright.py --this-year" with an extra external
author I haven't committed, 'Kalray SA.', to cover gas testsuite
files (which should have their copyright message removed).
3) Build with --enable-maintainer-mode --enable-cgen-maint=yes.
4) Check out */po/*.pot which we don't update frequently.
Suppose we want to use la.got to generate 32 pcrel and
32 abs instruction sequences respectively. According to
the existing conditions, to generate 32 pcrel sequences
use -mabi=ilp32*, and to generate 32 abs use -mabi=ilp32*
and -mla-global-with-abs.
Due to the fact that the conditions for generating 32 abs
also satisfy 32 pcrel, using -mabi=ilp32* and -mla-global-with-abs
will result in only generating instruction sequences of 32 pcrel.
By modifying the conditions for macro expansion and adjusting
the matching order of macro instructions, it is ensured that
the correct sequence of instructions can be generated.
For tail36, it is necessary to explicitly indicate the temporary register.
Therefore, the compiler and users will know that the tail will use a register.
call36 func
pcalau18i $ra, %call36(func)
jirl $ra, $ra, 0;
tail36 $t0, func
pcalau18i $t0, %call36(func)
jirl $zero, $t0, 0;
Add a macro pcaddi instruction to support "pcaddi rd, symbol".
pcaddi has a 20-bit signed immediate, it can address a +/- 2MB pc relative
address, and the address should be 4-byte aligned.
opcodes/ChangeLog:
* loongarch-opc.c: Mark the offset operands as "so" for
{,x}v{ld,st}, {,x}v{ldrepl,stelm}.[bhwd], and {ld,st}[lr].[wd].
Signed-off-by: WANG Xuerui <git@xen0n.name>
As outlined in the LoongArch ELF psABI spec [1], it is actually already
2 versions after the initial LoongArch support, and the $v[01] and
$fv[01] names should really get sunset by now.
In addition, the "$x" name for $r21 was never included in any released
version of the ABI spec, and such usages are all fixed to say just $r21
for every project I could think of that accepted a LoongArch port.
Plus, the upcoming LSX/LASX support makes use of registers named
"$vrNN" and "$xrNN", so having "$vN" and "$x" alongside would almost
certainly create confusion for developers.
Issue warnings for such usages per the deprecation procedure detailed
in the spec, so we can finally remove support in the next release cycle
after this.
[1]: https://loongson.github.io/LoongArch-Documentation/LoongArch-ELF-ABI-EN.html
gas/ChangeLog:
* config/tc-loongarch.c: Init canonical register ABI name
mappings and deprecated register names.
(loongarch_args_parser_can_match_arg_helper): Warn in case of
deprecated register name usage.
* testsuite/gas/loongarch/deprecated_reg_aliases.d: New test.
* testsuite/gas/loongarch/deprecated_reg_aliases.l: Likewise.
* testsuite/gas/loongarch/deprecated_reg_aliases.s: Likewise.
include/ChangeLog:
* opcode/loongarch.h: Rename global variables.
opcodes/ChangeLog:
* loongarch-opc.c: Rename the alternate/deprecated register name
mappings, and move $x to the deprecated name map.
Signed-off-by: WANG Xuerui <git@xen0n.name>
Add a modifier char 'o' telling the disassembler to print the immediate
using the address offset style, and mark the memory access instructions'
offset operands as such.
opcodes/ChangeLog:
* loongarch-dis.c (dis_one_arg): Style disassembled address
offsets as such when the operand has a modifier char 'o'.
* loongarch-opc.c: Add 'o' to operands that represent address
offsets.
Signed-off-by: WANG Xuerui <git@xen0n.name>
Add a flag in the pinfo field for being able to mark certain specialized
matchers as disassembler-only, so some degree of isolation between
assembler-side and disassembler-side can be achieved.
This isolation is necessary, firstly because some pseudo-instructions
cannot be fully described in the opcode table, like `li.[wd]`, so the
corresponding opcode entry cannot have meaningful match/mask values.
Secondly, some of these pseudo-instructions can be realized in more than
one plausible ways; e.g. `li.w rd, <something between 0 and 0x7ff>` can
be realized on LA64 with any of `addi.w`, `addi.d` or `ori`. If we tie
disassembly of such aliases with the corresponding GAS support, only one
canonical form among the above would be recognized as `li.w`, and it
would mildly impact the readability of disassembly output.
People wanting the exact disassembly can always set `-M no-aliases` to
get the original behavior back.
In addition, in certain cases, information is irreversibly lost after
assembling, so perfect round-trip would not be possible in such cases.
For example, `li.w` and `li.d` of immediates within int32_t range
produce the same code; in this patch, `addi.d rd, $zero, imm` is treated
as `li.d`, while `addi.w` and `ori` immediate loads are shown as `li.w`,
due to the expressible value range well within 32 bits.
gas/ChangeLog:
* config/tc-loongarch.c (get_loongarch_opcode): Ignore
disassembler-only aliases.
* testsuite/gas/loongarch/64_pcrel.d: Update test case.
* testsuite/gas/loongarch/imm_ins.d: Likewise.
* testsuite/gas/loongarch/imm_ins_32.d: Likewise.
* testsuite/gas/loongarch/jmp_op.d: Likewise.
* testsuite/gas/loongarch/li.d: Likewise.
* testsuite/gas/loongarch/macro_op.d: Likewise.
* testsuite/gas/loongarch/macro_op_32.d: Likewise.
* testsuite/gas/loongarch/macro_op_large_abs.d: Likewise.
* testsuite/gas/loongarch/macro_op_large_pc.d: Likewise.
* testsuite/gas/loongarch/nop.d: Likewise.
* testsuite/gas/loongarch/relax_align.d: Likewise.
* testsuite/gas/loongarch/reloc.d: Likewise.
include/ChangeLog:
* opcode/loongarch.h (INSN_DIS_ALIAS): Add.
ld/ChangeLog:
* testsuite/ld-loongarch-elf/jmp_op.d: Update test case.
* testsuite/ld-loongarch-elf/macro_op.d: Likewise.
* testsuite/ld-loongarch-elf/macro_op_32.d: Likewise.
* testsuite/ld-loongarch-elf/relax-align.dd: Likewise.
opcodes/ChangeLog:
* loongarch-dis.c: Move register name map declarations to top.
(get_loongarch_opcode_by_binfmt): Consider aliases when
disassembling without the no-aliases option.
(parse_loongarch_dis_option): Support the no-aliases option.
* loongarch-opc.c: Collect pseudo instructions into a new
dedicated table.
Signed-off-by: WANG Xuerui <git@xen0n.name>
Previously, FCSRs were referred to as $rX, which seemed strange.
We refer to FCSRs as $fcsrX, which ensures compatibility with LLVM
IAS as well.
gas/ChangeLog:
* config/tc-loongarch.c:
(loongarch_fc_normal_name): New definition.
(loongarch_fc_numeric_name): New definition.
(loongarch_single_float_opcodes): Modify `movgr2fcsr` and
`movfcsr2gr`.
testsuite/gas/loongarch/float_op.d: Likewise.
testsuite/gas/loongarch/float_op.s: Likewise.
include/ChangeLog:
* opcode/loongarch.h:
(loongarch_fc_normal_name): New extern.
(loongarch_fc_numeric_name): New extern.
opcodes/ChangeLog:
* opcodes/loongarch-dis.c (loongarch_after_parse_args): Support
referring to FCSRs as $fcsrX.
* opcodes/loongarch-opc.c (loongarch_args_parser_can_match_arg_helper):
Likewise.
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Trying to build binutils with an older gcc currently fails. Working
around these gcc bugs is not onerous so let's fix them.
bfd/
* elf32-csky.c (csky_elf_size_dynamic_sections): Don't type-pun
pointer.
* elf32-rl78.c (rl78_compute_complex_reloc): Rename "stat"
variable to "status".
gas/
* compress-debug.c (compress_finish): Supply all fields in
ZSTD_inBuffer initialisation.
include/
* xtensa-dynconfig.h (xtensa_isa_internal): Delete unnecessary
forward declaration.
opcodes/
* loongarch-opc.c: Supply all fields of zero struct initialisation
in various opcode tables.
The newer update-copyright.py fixes file encoding too, removing cr/lf
on binutils/bfdtest2.c and ld/testsuite/ld-cygwin/exe-export.exp, and
embedded cr in binutils/testsuite/binutils-all/ar.exp string match.
This syntactic sugar is present in both classical and emerging
architectures, like Alpha, SPARC and RISC-V, and assembler macros
doing the same thing can already be found in the wild e.g. [1], proving
the feature's popularity. It's better to provide support directly in the
assembler so downstream users wouldn't have to re-invent this over and
over again.
[1]: https://sourceware.org/git/?p=glibc.git;a=blob;f=sysdeps/unix/sysv/linux/loongarch/sysdep.h;h=c586df819cd90;hb=HEAD#l28
Also re-order the jump/branch opcodes while at it, so that insns are
sorted in ascending order according to opcodes, and the label form
preceding the real definition.
The result of running etc/update-copyright.py --this-year, fixing all
the files whose mode is changed by the script, plus a build with
--enable-maintainer-mode --enable-cgen-maint=yes, then checking
out */po/*.pot which we don't update frequently.
The copy of cgen was with commit d1dd5fcc38ead reverted as that commit
breaks building of bfp opcodes files.
