* config/m68k-parse.h (m68k_register): Add CAC and MBB.
* config/tc-m68k.c (fido_ctrl): New.
(m68k_archs): Use fido_ctrl for -mfidoa.
(m68k_cpus): Use fido_ctrl on fido-*-*.
(m68k_ip): Add support for CAC and MBB.
(init_table): Add CAC and MBB.
opcodes/
* m68k-dis.c (print_insn_arg): Add support for cac and mbb.
* i386-dis.c (Eq): Replaced by ...
(Mq): New. This.
(Ma): Defined with OP_M instead of OP_E.
(grps): Updated cmpxchg8b and vmptrst for Eq -> Mq.
(OP_M): Added bound, cmpxchg8b and vmptrst to bad modrm list.
2006-12-04 Jan Beulich <jbeulich@novell.com>
* i386-dis.c (OP_J): Update used_prefixes in v_mode.
gas/testsuite/
2006-12-04 Jan Beulich <jbeulich@novell.com>
* gas/i386/opcode-intel.d: Fix wrong expectation. Make white space
expectations more consistent.
2006-11-30 Jan Beulich <jbeulich@novell.com>
* i386-dis.c (SEG_Fixup): Delete.
(Sv): Use OP_SEG.
(putop): New suffix character 'D'.
(dis386): Use it.
(grps): Likewise.
(OP_SEG): Handle bytemode other than w_mode.
gas/testsuite/
2006-11-30 Jan Beulich <jbeulich@novell.com>
* gas/i386/intel.d: Adjust.
* gas/i386/naked.d: Adjust.
* gas/i386/opcode.d: Adjust.
2006-11-30 Jan Beulich <jbeulich@novell.com>
* i386-dis.c (dis386): Use 'R' and 'O' for cbw/cwd unconditionally.
(putop): For 'O' suffix, print 'q' in Intel mode, and mark data prefix
used. For 'R' and 'W' suffix, simplify and fix Intel mode.
gas/testsuite/
2006-11-30 Jan Beulich <jbeulich@novell.com>
* gas/i386/intel.s: Use Intel syntax in Intel syntax test.
* gas/i386/x86-64-cbw.[sd]: New.
* gas/i386/x86-64-cbw-intel.d: New.
* gas/i386/i386.exp: Run new tests.
* arm-dis.c (last_is_thumb): Delete.
(enum map_type, last_type): New.
(print_insn_data): New.
(get_sym_code_type): Take MAP_TYPE argument. Check the type of
the right symbol. Handle $d.
(print_insn): Check for mapping symbols even without a normal
symbol. Adjust searching. If $d is found see how much data
to print. Handle data.
gas/
* config/tc-arm.h (md_cons_align): Define.
(mapping_state): New prototype.
* config/tc-arm.c (mapping_state): Make global.
gas/testsuite/
* gas/arm/arm7t.d, gas/arm/neon-ldst-rm.d, gas/arm/thumb2_pool.d,
gas/arm/tls.d: Update for $d support.
* gas/arm/mapshort.d, gas/arm/mapshort.s: New test.
* gas/elf/section2.e-armeabi: Update.
* gas/elf/section2.e-armelf: New file.
* gas/elf/elf.exp: Use it.
ld/testsuite/
* ld-arm/mixed-app.d, ld-arm/tls-app.d, ld-arm/tls-lib.d: Update
for $d support.
* config/tc-m68k.c (m68k_ip): Correct output of cpu aliases.
gas/testsuite/
* gas/m68k/all.exp: Add mcf-trap.
* gas/m68k/mcf-trap.[sd]: New.
opcodes/
* m68k-opc.c (m68k_opcodes): Place trap instructions before set
conditionals. Add tpf coldfire instruction as alias for trapf.
(my_get_expression): Const operand of some instructions can not be symbol in assembly.
(get_insn_class_from_type): Handle instruction type Insn_internal.
(do_macro_ldst_label): Modify inst.type.
(Insn_PIC): Delete.
* score-inst.h (enum score_insn_type): Add Insn_internal.
* tc-score.c (data_op2): The immediate value in lw is 15 bit signed.
* score-dis.c (print_insn): Correct the error code to print correct PCE instruction disassembly.
2006-09-26 Mark Shinwell <shinwell@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
Ian Lance Taylor <ian@wasabisystems.com>
Ben Elliston <bje@wasabisystems.com>
* archures.c: Add definition for bfd_mach_arm_iWMMXt2.
* cpu-arm.c (processors): Add bfd_mach_arm_iWMMXt2.
(arch_info_struct, bfd_arm_update_notes): Likewise.
(architectures): Likewise.
(bfd_arm_merge_machines): Check for iWMMXt2.
* bfd-in2.h: Rebuild.
gas/
2006-09-26 Mark Shinwell <shinwell@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
Ian Lance Taylor <ian@wasabisystems.com>
Ben Elliston <bje@wasabisystems.com>
* config/tc-arm.c (arm_cext_iwmmxt2): New.
(enum operand_parse_code): New code OP_RIWR_I32z.
(parse_operands): Handle OP_RIWR_I32z.
(do_iwmmxt_wmerge): New function.
(do_iwmmxt_wldstd): Handle iwmmxt2 case where second operand is
a register.
(do_iwmmxt_wrwrwr_or_imm5): New function.
(insns): Mark instructions as RIWR_I32z as appropriate.
Also add torvsc<b,h,w>, wabs<b,h,w>, wabsdiff<b,h,w>,
waddbhus<l,m>, waddhc, waddwc, waddsubhx, wavg4{r}, wmaddu{x,n},
wmadds{x,n}, wmerge, wmiaxy{n}, wmiawxy{n}, wmul<sm,um>{r},
wmulw<um,sm,l>{r}, wqmiaxy{n}, wqmulm{r}, wqmulwm{r}, wsubaddhx.
(md_begin): Handle IWMMXT2.
(arm_cpus): Add iwmmxt2.
(arm_extensions): Likewise.
(arm_archs): Likewise.
gas/testsuite/
2006-09-26 Mark Shinwell <shinwell@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
Ian Lance Taylor <ian@wasabisystems.com>
Ben Elliston <bje@wasabisystems.com>
* gas/arm/iwmmxt2.s: New file.
* gas/arm/iwmmxt2.d: New file.
include/opcode/
2006-09-26 Mark Shinwell <shinwell@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
Ian Lance Taylor <ian@wasabisystems.com>
Ben Elliston <bje@wasabisystems.com>
* arm.h (ARM_CEXT_IWMMXT2, ARM_ARCH_IWMMXT2): Define.
opcodes/
2006-09-26 Mark Shinwell <shinwell@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
Ian Lance Taylor <ian@wasabisystems.com>
Ben Elliston <bje@wasabisystems.com>
* arm-dis.c (coprocessor_opcodes): The X-qualifier to WMADD may
only be used with the default multiply-add operation, so if N is
set, don't bother printing X. Add new iwmmxt instructions.
(IWMMXT_INSN_COUNT): Update.
(iwmmxt_wwssnames): Qualify "wwss" names at index 2, 6, 10 and 14
with a 'c' suffix.
(print_insn_coprocessor): Check for iWMMXt2. Handle format
specifiers 'r', 'i'.
PR binutils/3100
* i386-dis.c (prefix_user_table): Fix the second operand of
maskmovdqu instruction to allow only %xmm register instead of
both %xmm register and memory.
argument and emits the string followed by a comma and then the length of
the string.
(CONST_STRNEQ): New macro. Checks to see if a variable string has a constant
string as its initial characters.
(CONST_STRNCPY): New macro. Copies a constant string to the start of a
variable string.
* bfd-in2.h: Regenerate.
* <remainign files>: Make use of the new macros.
gas/
* config/tc-arm.c (do_neon_dyadic_if_i): Remove.
(do_neon_dyadic_if_i_d): Avoid setting U bit.
(do_neon_mac_maybe_scalar): Ditto.
(do_neon_dyadic_narrow): Force operand type to NT_integer.
(insns): Remove out of date comments.
gas/testsuite/
* gas/arm/neon-cov.s: Test .u and .s aliases for .i suffixes.
* gas/arm/neon-cov.d: Adjust expected output.
opcodes/
* arm-dis.c (neon_opcode): Fix suffix on VMOVN.
2006-06-12 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/i386.exp: Run nops and x86-64-nops.
* gas/i386/nops.d: New file.
* gas/i386/nops.s: Likewise.
* gas/i386/x86-64-nops.d: Likewise.
* gas/i386/x86-64-nops.s: Likewise.
include/opcode/
2006-06-12 H.J. Lu <hongjiu.lu@intel.com>
* i386.h (i386_optab): Add "nop" with memory reference.
opcodes/
2006-06-12 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (dis386_twobyte): Use "nopQ" for 0x1f.
(twobyte_has_modrm): Set 1 for 0x1f.
* m68k.h (mcf_mask): Define.
opcodes/
* m68k-opc.c (m68k_opcodes): Fix the masks of the Coldfire fmovemd
and fmovem entries. Put register list entries before immediate
mask entries. Use "l" rather than "L" in the fmovem entries.
* m68k-dis.c (match_insn_m68k): Remove the PRIV argument and work it
out from INFO.
(m68k_scan_mask): New function, split out from...
(print_insn_m68k): ...here. If no architecture has been set,
first try printing an m680x0 instruction, then try a Coldfire one.
gas/testsuite/
* gas/m68k/mcf-fpu.s: Add fmovemd and fmovem instructions.
* gas/m68k/mcf-fpu.d: Adjust accordingly.
* config/tc-mips.c (macro_build): Test for currently active
mips16 option.
(mips16_ip): Reject invalid opcodes.
[ opcodes/ChangeLog ]
* mips16-opc.c (I1, I32, I64): New shortcut defines.
(mips16_opcodes): Change membership of instructions to their
lowest baseline ISA.
[ gas/testsuite/ChangeLog ]
* gas/mips/mips.exp: Run new tests.
* gas/mips/mips16e.s, gas/mips/mips16e.d, gas/mips/mips16e-64.s,
gas/mips/mips16e-64.d, gas/mips/mips16e-64.l: New tests.
2006-04-30 Thiemo Seufer <ths@mips.com>
David Ung <davidu@mips.com>
* config/tc-mips.c (validate_mips_insn): Handling of udi cases.
(mips_immed): New table that records various handling of udi
instruction patterns.
(mips_ip): Adds udi handling.
[ include/opcode/ChangeLog ]
2006-04-30 Thiemo Seufer <ths@mips.com>
David Ung <davidu@mips.com>
* mips.h: Defines udi bits and masks. Add description of
characters which may appear in the args field of udi
instructions.
[ opcodes/ChangeLog ]
2006-04-30 Thiemo Seufer <ths@mips.com>
David Ung <davidu@mips.com>
* mips-opc.c (mips_builtin_opcodes): Add udi instructions
"udi0" to "udi15".
* mips-dis.c (print_insn_args): Adds udi argument handling.
2006-02-27 H.J. Lu <hongjiu.lu@intel.com>
* gas/config/tc-i386.c (output_insn): Support Intel Merom New
Instructions.
* gas/config/tc-i386.h (CpuMNI): New.
(CpuUnknownFlags): Add CpuMNI.
gas/testsuite/
2006-02-27 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/i386.exp: Add merom and x86-64-merom.
* gas/i386/merom.d: New file.
* gas/i386/merom.s: Likewise.
* gas/i386/x86-64-merom.d: Likewise.
* gas/i386/x86-64-merom.s: Likewise.
include/opcode/
2006-02-27 H.J. Lu <hongjiu.lu@intel.com>
* i386.h (i386_optab): Support Intel Merom New Instructions.
opcodes/
2006-02-27 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (IS_3BYTE_OPCODE): New for 3-byte opcodes used by
Intel Merom New Instructions.
(THREE_BYTE_0): Likewise.
(THREE_BYTE_1): Likewise.
(three_byte_table): Likewise.
(dis386_twobyte): Use THREE_BYTE_0 for entry 0x38. Use
THREE_BYTE_1 for entry 0x3a.
(twobyte_has_modrm): Updated.
(twobyte_uses_SSE_prefix): Likewise.
(print_insn): Handle 3-byte opcodes used by Intel Merom New
Instructions.
* sparc-dis.c (v9_priv_reg_names): Add "gl" entry.
(v9_hpriv_reg_names): New table.
(print_insn_sparc): Allow values up to 16 for '?' and '!'.
New cases '$' and '%' for read/write hyperprivileged register.
* sparc-opc.c (sparc_opcodes): Add new entries for UA2005
window handling and rdhpr/wrhpr instructions.
2006-02-11 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/i386.exp: Add "x86-64-crx" and "x86-64-crx-suffix".
* gas/i386/x86-64-crx-suffix.d: New file.
* gas/i386/x86-64-crx.d: Likewise.
* gas/i386/x86-64-crx.s: Likewise.
opcodes/
2006-02-11 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c ('Z'): Add a new macro.
(dis386_twobyte): Use "movZ" for control register moves.
instructions. Define MIPS16_ALL_ARGS and MIPS16_ALL_STATICS for
save/restore encoding of the args field.
* mips16-opc.c: Add MIPS16e save/restore opcodes.
* mips-dis.c (print_mips16_insn_arg): Handle printing of 'm'/'M'
codes for save/restore.
* config/tc-mips.c (mips16_ip): Add handling of 'm' and 'M' codes
for the MIPS16e save/restore instructions.
* gas/mips/mips.exp: Run new save/restore tests.
* gas/testsuite/gas/mips/mips16e-save.s: New test for generating
different styles of save/restore instructions.
* gas/testsuite/gas/mips/mips16e-save.d: New.
* All CGEN-generated sources: Regenerate.
Contribute the following changes:
2005-09-19 Dave Brolley <brolley@redhat.com>
* disassemble.c (disassemble_init_for_target): Add 'break' to case for
bfd_arch_tic4x. Use cgen_bitset_create and cgen_bitset_set for
bfd_arch_m32c case.
2005-02-16 Dave Brolley <brolley@redhat.com>
* cgen-dis.in: Rename CGEN_ISA_MASK to CGEN_BITSET. Rename
cgen_isa_mask_* to cgen_bitset_*.
* cgen-opc.c: Likewise.
2003-11-28 Richard Sandiford <rsandifo@redhat.com>
* cgen-dis.in (print_insn_@arch@): Fix comparison with cached isas.
* *-dis.c: Regenerate.
2003-06-05 DJ Delorie <dj@redhat.com>
* cgen-dis.in (print_insn_@arch@): Copy prev_isas, don't assign
it, as it may point to a reused buffer. Set prev_isas when we
change cpus.
2002-12-13 Dave Brolley <brolley@redhat.com>
* cgen-opc.c (cgen_isa_mask_create): New support function for
CGEN_ISA_MASK.
(cgen_isa_mask_init): Ditto.
(cgen_isa_mask_clear): Ditto.
(cgen_isa_mask_add): Ditto.
(cgen_isa_mask_set): Ditto.
(cgen_isa_supported): Ditto.
(cgen_isa_mask_compare): Ditto.
(cgen_isa_mask_intersection): Ditto.
(cgen_isa_mask_copy): Ditto.
(cgen_isa_mask_combine): Ditto.
* cgen-dis.in (libiberty.h): #include it.
(isas): Renamed from 'isa' and now (CGEN_ISA_MASK *).
(print_insn_@arch@): Use CGEN_ISA_MASK and support functions.
* Makefile.am (CGENDEPS): Add utils-cgen.scm and attrs.scm.
* Makefile.in: Regenerated.
2005-10-24 Jan Beulich <jbeulich@novell.com>
* ia64.h (enum ia64_opnd): Move memory operand out of set of
indirect operands.
bfd/
2005-10-24 Jan Beulich <jbeulich@novell.com>
* cpu-ia64-opc.c (elf64_ia64_operands): Move memory operand out of
set of indirect operands.
gas/
2005-10-24 Jan Beulich <jbeulich@novell.com>
* config/tc-ia64.c (enum reg_symbol): Delete IND_MEM.
(dot_rot): Change type of num_* variables. Check for positive count.
(ia64_optimize_expr): Re-structure.
(md_operand): Check for general register.
gas/testsuite/
2005-10-24 Jan Beulich <jbeulich@novell.com>
* gas/ia64/index.[sl]: New.
* gas/ia64/rotX.[sl]: New.
* gas/ia64/ia64.exp: Run new tests.
opcodes/
2005-10-24 Jan Beulich <jbeulich@novell.com>
* ia64-asmtab.c: Regenerate.
2005-09-28 Jan Beulich <jbeulich@novell.com>
* gas/i386/x86-64-stack.s, gas/i386/x86-64-stack.d,
gas/i386/x86-64-stack-suffix.d, gas/i386/x86-64-stack-intel.d: New.
* gas/i386/i386.exp: Run new tests.
ld/testsuite/
2005-09-28 Jan Beulich <jbeulich@novell.com>
* ld-x86-64/tlspic.dd: Adjust.
opcodes/
2005-09-28 Jan Beulich <jbeulich@novell.com>
* i386-dis.c (stack_v_mode): Renamed from branch_v_mode.
(indirEv): Use it.
(stackEv): New.
(Ob64, Ov64): Rename to Ob, Ov. Delete unused original definitions.
(dis386): Document and use new 'V' meta character. Use it for
single-byte push/pop opcode forms. Use stackEv for mod-r/m push/pop
opcode forms. Correct typo in 'pop ss'. Replace Ob64/Ov64 by Ob/Ov.
(putop): 'q' suffix for 'T' and 'U' meta depends on DFLAG. Mark
data prefix as used whenever DFLAG was examined. Handle 'V'.
(intel_operand_size): Use stack_v_mode.
(OP_E): Use stack_v_mode, but handle only the special case of
64-bit mode without operand size override here; fall through to
v_mode case otherwise.
(OP_REG): Special case rAX_reg ... rDI_reg only when 64-bit mode
and no operand size override is present.
(OP_J): Use get32s for obtaining the displacement also when rex64
is present.
(mips_builtin_opcodes): Move "bc0f", "bc0fl", "bc0t", "bc0tl" to the
bottom to avoid opcode collision with "mftr" and "mttr".
Add MT instructions.
* mips-dis.c (mips_arch_choices): Enable INSN_MT for mips32r2.
(print_insn_args): Add supports for +t, +T, !, $, *, &, g operand
formats.
bfd/
* libbdf.h: Regenerate.
* bfd-in2.h: Regenerate.
* reloc.c: Add BFD_RELOC_ARM_T32_CP_OFF_IMM and
BFD_RELOC_ARM_T32_CP_OFF_IMM_S2.
gas/
* config/tc-arm.c (encode_arm_cp_address): Use
BFD_RELOC_ARM_T32_CP_OFF_IMM in thumb mode.
(do_iwmmxt_wldstbh): Use BFD_RELOC_ARM_T32_CP_OFF_IMM_S2 in thumb
mode.
(md_assemble): Only allow coprocessor instructions when Thumb-2 is
available.
(cCE, cC3): Define.
(insns): Use them for coprocessor instructions.
(md_pcrel_from_section): Handle BFD_RELOC_ARM_T32_CP_OFF_IMM.
(get_thumb32_insn): New function.
(put_thumb32_insn): New function.
(md_apply_fix): Handle BFD_RELOC_ARM_T32_CP_OFF_IMM and
BFD_RELOC_ARM_T32_CP_OFF_IMM_S2.
gas/testsuite/
* gas/arm/vfp-bad_t2.d, gas/arm/vfp-bad_t2.l, arm/vfp-bad_t2.s,
gas/arm/vfp1_t2.d, gas/arm/vfp1_t2.s, gas/arm/vfp1xD_t2.d,
gas/arm/vfp1xD_t2.s, gas/arm/vfp2_t2.d, gas/arm/vfp2_t2.s): New files.
opcodes/
* arm-dis.c (coprocessor_opcodes): New.
(arm_opcodes, thumb32_opcodes): Remove coprocessor insns.
(print_insn_coprocessor): New function.
(print_insn_arm): Use print_insn_coprocessor. Remove coprocessor
format characters.
(print_insn_thumb32): Use print_insn_coprocessor.
2005-08-26 Jan Beulich <jbeulich@novell.com>
* i386-dis.c (intel_operand_size): New, broken out from OP_E for
re-use.
(OP_E): Call intel_operand_size, move call site out of mode
dependent code.
(OP_OFF): Call intel_operand_size if suffix_always. Remove
ATTRIBUTE_UNUSED from parameters.
(OP_OFF64): Likewise.
(OP_ESreg): Call intel_operand_size.
(OP_DSreg): Likewise.
(OP_DIR): Use colon rather than semicolon as separator of far
jump/call operands.
gas/testsuite/
2005-08-26 Jan Beulich <jbeulich@novell.com>
* gas/i386/intelok.d: Adjust.
* s390-mkopc.c (s390_opcode_cpu_val): Add support for cpu type z9-109.
(main): Likewise.
* s390-opc.c (I32_16, U32_16, M_16): Add defines 32 bit immediates
and 4 bit optional masks.
(INSTR_RIL_RI, INSTR_RIL_RU, INSTR_RRF_M0RR, INSTR_RSE_CCRD,
INSTR_RSY_CCRD, INSTR_SSF_RRDRD): Add new instruction formats.
(MASK_RIL_RI, MASK_RIL_RU, MASK_RRF_M0RR, MASK_RSE_CCRD,
MASK_RSY_CCRD, MASK_SSF_RRDRD): Likewise.
(s390_opformats): Likewise.
* s390-opc.txt: Add new instructions for cpu type z9-109.
2005-07-14 Jim Blandy <jimb@redhat.com>
* configure.in: Add cases for Renesas m32c.
* configure: Regenerated.
bfd/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for m32c-*-elf (Renesas m32c and m16c).
* Makefile.am (ALL_MACHINES): Add cpu-m32c.lo.
(ALL_MACHINES_CFILES): Add cpu-m32c.c.
(BFD32_BACKENDS): Add elf32-m32c.lo.
(BFD32_BACKENDS_CFILES): Add elf32-m32c.c.
(cpu-m32c.lo, elf32-m32c.lo): New rules, generated by 'make dep-am'.
* Makefile.in: Regenerated.
* archures.c (bfd_arch_m32c, bfd_mach_m16c, bfd_mach_m32c): New
arch and mach codes.
(bfd_m32c_arch): New arch info object.
(bfd_archures_list): List bfd_m32c_arch.
* bfd-in2.h: Regenerated.
* config.bfd: Add case for the m32c.
* configure.in: Add case for the m32c.
* configure: Regenerated.
* cpu-m32c.c, elf32-m32c.c: New files.
* libbfd.h: Regenerated.
* targets.c (bfd_elf32_m32c_vec): Declare.
(_bfd_target_vector): List bfd_elf32_m32c_vec.
binutils/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
* readelf.c: #include "elf/m32c.h"
(guess_is_rela, dump_relocations, get_machine_name): Add cases for
EM_M32C.
* Makefile.am (readelf.o): Update dependencies.
* Makefile.in: Regenerated.
cpu/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
* m32c.cpu, m32c.opc: Machine description for the Renesas M32C.
gas/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for the Renesas M32C.
* Makefile.am (CPU_TYPES): List m32c.
(TARGET_CPU_CFILES): List config/tc-m32c.c.
(TARGET_CPU_HFILES): List config/tc-m32c.h.
* configure.in: Add case for m32c.
* configure.tgt: Add cases for m32c and m32c-*-elf.
* configure: Regenerated.
* config/tc-m32c.c, config/tc-m32c.h: New files.
* doc/Makefile.am (CPU_DOCS): Add c-m32c.texi.
* doc/Makefile.in: Regenerated.
* doc/all.texi: Set M32C.
* doc/as.texinfo: Add text for the M32C-specific options and line
comment characters, and refer to c-m32c.texi.
* doc/c-m32c.texi: New file.
include/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
* dis-asm.h (print_insn_m32c): New declaration.
include/elf/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for Renesas M32C and M16C.
* common.h (EM_M32C): New machine number.
* m32c.h: New file.
ld/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for the Renesas M32C and M16C.
* Makefile.am (ALL_EMULATIONS): Add eelf32m32c.o.
(eelf32m32c.c): New target.
* Makefile.in: Regenerated.
* configure.tgt: Add case for m32c-*-elf.
* emulparams/elf32m32c.sh: New file.
opcodes/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for the Renesas M32C and M16C.
* m32c-asm.c, m32c-desc.c, m32c-dis.c, m32c-ibld.c, m32c-opc.c: New.
* m32c-desc.h, m32c-opc.h: New.
* Makefile.am (HFILES): List m32c-desc.h and m32c-opc.h.
(CFILES): List m32c-asm.c, m32c-desc.c, m32c-dis.c, m32c-ibld.c,
m32c-opc.c.
(ALL_MACHINES): List m32c-asm.lo, m32c-desc.lo, m32c-dis.lo,
m32c-ibld.lo, m32c-opc.lo.
(CLEANFILES): List stamp-m32c.
(M32C_DEPS): List stamp-m32c, if CGEN_MAINT.
(CGEN_CPUS): Add m32c.
(m32c-asm.c, m32c-desc.c, m32c-dis.c, m32c-ibld.c, m32c-opc.c)
(m32c-desc.h, m32c-opc.h): Depend on M32C_DEPS.
(m32c_opc_h): New variable.
(stamp-m32c, m32c-asm.lo, m32c-desc.lo, m32c-dis.lo, m32c-ibld.lo)
(m32c-opc.lo): New rules.
* Makefile.in: Regenerated.
* configure.in: Add case for bfd_m32c_arch.
* configure: Regenerated.
* disassemble.c (ARCH_m32c): New.
[ARCH_m32c]: #include "m32c-desc.h".
(disassembler) [ARCH_m32c]: Add case for bfd_arch_m32c.
(disassemble_init_for_target) [ARCH_m32c]: Same.
* cgen-ops.h, cgen-types.h: New files.
* Makefile.am (HFILES): List them.
* Makefile.in: Regenerated.
2005-07-05 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.h (CpuSVME): New.
(CpuUnknownFlags): Include CpuSVME.
* config/tc-i386.c (cpu_arch): Add .pacifica and .svme. Add opteron
as alias of sledgehammer.
(md_assemble): Include invlpga in the check for insns with two source
operands.
(process_operands): Include SVME insns in the check for ignored
segment overrides. Adjust diagnostic.
(i386_index_check): Special-case SVME insns with memory operands.
gas/testsuite/
2005-07-05 Jan Beulich <jbeulich@novell.com>
* gas/i386/svme.d: New.
* gas/i386/svme.s: New.
* gas/i386/svme64.d: New.
* gas/i386/i386.exp: Run new tests.
include/opcode/
2005-07-05 Jan Beulich <jbeulich@novell.com>
* i386.h (i386_optab): Add new insns.
opcodes/
2005-07-05 Jan Beulich <jbeulich@novell.com>
* i386-dis.c (SVME_Fixup): New.
(grps): Use it for the lidt entry.
(PNI_Fixup): Call OP_M rather than OP_E.
(INVLPG_Fixup): Likewise.
* arm-opc.h: Delete; fold contents into ...
* arm-dis.c: ... here. Move includes of internal COFF headers
next to includes of internal ELF headers.
(streq, WORD_ADDRESS, BDISP, BDISP23): Delete, unused.
(struct arm_opcode): Rename struct opcode32. Make 'assembler' const.
(struct thumb_opcode): Rename struct opcode16. Make 'assembler' const.
(arm_conditional, arm_fp_const, arm_shift, arm_regname, regnames)
(iwmmxt_wwnames, iwmmxt_wwssnames):
Make const.
(regnames): Remove iWMMXt coprocessor register sets.
(iwmmxt_regnames, iwmmxt_cregnames): New statics.
(get_arm_regnames): Adjust fourth argument to match above changes.
(set_iwmmxt_regnames): Delete.
(print_insn_arm): Constify 'c'. Use ISO syntax for function
pointer calls. Expand sole use of BDISP. Use iwmmxt_regnames
and iwmmxt_cregnames, not set_iwmmxt_regnames.
(print_insn_thumb16, print_insn_thumb32): Constify 'c'. Use
ISO syntax for function pointer calls.
include:
* dis-asm.h (get_arm_regnames): Update prototype.
that the ARM and 16-bit Thumb opcode tables each have comments
preceding them that describe all the codes, and only the codes,
valid in those tables. (32-bit Thumb table is already like this.)
Reorder the lists in all three comments to match the order in
which the codes are implemented.
Remove all forward declarations of static functions. Convert all
function definitions to ISO C format.
(print_insn_arm, print_insn_thumb16, print_insn_thumb32):
Return nothing.
(print_insn_thumb16): Remove unused case 'I'.
(print_insn): Update for changed calling convention of subroutines.
2005-05-25 Jan Beulich <jbeulich@novell.com>
* gas/i386/intelok.d: Account for 32-bit displacements being shown
in hex.
opcodes/
2005-05-25 Jan Beulich <jbeulich@novell.com>
* i386-dis.c (OP_E): In Intel mode, display 32-bit displacements in
hex (but retain it being displayed as signed). Remove redundant
checks. Add handling of displacements for 16-bit addressing in Intel
mode.
* arm.h: Import complete list of official relocation names
and numbers from AAELF. Define FAKE_RELOCs for old names.
Remove a few old names no longer used anywhere.
bfd:
* elf32-arm.c: Wherever possible, use official reloc names
from AAELF.
(elf32_arm_howto_table, elf32_arm_tls_gd32_howto)
(elf32_arm_tls_ldo32_howto, elf32_arm_tls_ldm32_howto)
(elf32_arm_tls_le32_howto, elf32_arm_tls_ie32_howto)
(elf32_arm_vtinherit_howto, elf32_arm_vtentry_howto)
(elf32_arm_pc11_howto, elf32_arm_thm_pc9_howto, elf32_arm_got_prel)
(elf32_arm_r_howto): Replace with elf32_arm_howto_table_1,
elf32_arm_howto_table_2, and elf32_arm_howto_table_3.
Add many new relocations from AAELF.
(elf32_arm_howto_from_type): Update to match.
(elf32_arm_reloc_map): Add entries for R_ARM_THM_JUMP24,
R_ARM_THM_JUMP11, R_ARM_THM_JUMP19, R_ARM_THM_JUMP8,
R_ARM_THM_JUMP6, R_ARM_GNU_VTINHERIT, and R_ARM_GNU_VTENTRY.
(elf32_arm_reloc_type_lookup): Use elf32_arm_howto_from_type.
(elf32_arm_final_link_relocate): Add support for
R_ARM_THM_JUMP24, R_ARM_THM_JUMP19, R_ARM_THM_JUMP6. Remove
case entries redundant with default.
* reloc.c: Reorganize ARM relocations. Add Thumb
assembler-internal relocations BFD_RELOC_ARM_T32_OFFSET_U8,
BFD_RELOC_ARM_T32_OFFSET_IMM, BFD_RELOC_ARM_T32_IMMEDIATE.
Add visible relocations BFD_RELOC_THUMB_PCREL_BRANCH7,
BFD_RELOC_THUMB_BRANCH20, BFD_RELOC_THUMB_BRANCH25.
Delete unused relocations BFD_RELOC_ARM_GOT12, BFD_RELOC_ARM_COPY.
* bfd-in2.h, libbfd.h: Regenerate.
opcodes:
* arm-dis.c (thumb_opcodes): Add disassembly for V6T2 16-bit
instructions. Adjust disassembly of some opcodes to match
unified syntax.
(thumb32_opcodes): New table.
(print_insn_thumb): Rename print_insn_thumb16; don't handle
two-halfword branches here.
(print_insn_thumb32): New function.
(print_insn): Choose among print_insn_arm, print_insn_thumb16,
and print_insn_thumb32. Be consistent about order of
halfwords when printing 32-bit instructions.
gas:
* hash.c (hash_lookup): Add len parameter. All callers changed.
(hash_find_n): New interface.
* hash.h: Prototype hash_find_n.
* sb.c: Include as.h.
(scrub_from_sb, sb_to_scrub, scrub_position): New statics.
(sb_scrub_and_add_sb): New interface.
* sb.h: Prototype sb_scrub_and_add_sb.
* input-scrub.c (input_scrub_include_sb): Use sb_scrub_and_add_sb.
* config/tc-arm.h (TC_FORCE_RELOCATION_LOCAL): Remove
reference to BFD_RELOC_ARM_GOT12 which is never generated.
* config/tc-arm.c: Rewrite, adding Thumb-2 support.
gas/testsuite:
* gas/arm/arm.exp: Convert all existing "gas_test" tests to
"run_dump_test" tests. Run more tests unconditionally. Run new tests.
* gas/arm/arch4t.s, gas/arm/arch6zk.s, gas/arm/arm3.s, gas/arm/arm6.s
* gas/arm/arm7dm.s, gas/arm/bignum1.s, gas/arm/float.s
* gas/arm/immed.s, gas/arm/iwmmxt.s, gas/arm/offset.s, gas/arm/thumb.s:
Adjust to work as a dump test.
* gas/arm/arch4t.d, gas/arm/arch6zk.d, gas/arm/arm3.d, gas/arm/arm6.d
* gas/arm/arm7dm.d, gas/arm/bignum1.d, gas/arm/float.d
* gas/arm/immed.d, gas/arm/iwmmxt.d, gas/arm/offset.d, gas/arm/thumb.d:
New files.
* gas/arm/armv1-bad.l, gas/arm/armv1-bad.s: Remove tests for
diagnostics that don't happen in the first pass anymore.
* gas/arm/iwmmxt-bad.l, gas/arm/r15-bad.l, gas/arm/req.l
* gas/arm/vfp-bad.l:
Update expected diagnostics.
* gas/arm/pic.d: Update expected reloc name.
* gas/arm/thumbv6.d: CPY no longer appears in disassembly.
* gas/arm/r15-bad.s: Avoid two-argument mul.
* gas/arm/req.s: Adjust comments.
* gas/arm/maverick.d, gas/arm/maverick.s: Avoid inappropriate
use of PC.
* gas/arm/macro-1.d, gas/arm/macro1.s
* gas/arm/t16-bad.l, gas/arm/t16-bad.s
* gas/arm/tcompat.d, gas/arm/tcompat.s
* gas/arm/tcompat2.d, gas/arm/tcompat2.s
* gas/arm/thumb32.d, gas/arm/thumb32.s
New test pair.
ld/testsuite:
* ld-arm/mixed-app.d: Adjust expected disassembly a little.
* config/tc-i386.c (md_begin): Allow hyphens in mnemonics.
include/opcode/ChangeLog:
* i386.h: Insert hyphens into selected VIA PadLock extensions.
Add xcrypt-ctr. Provide aliases without hyphens.
opcodes/ChangeLog:
* i386-dis.c: Insert hyphens into selected VIA PadLock extensions.
Add xcrypt-ctr.
2005-04-01 Jan Beulich <jbeulich@novell.com>
* i386-dis.c (PNI_Fixup): Neither mwait nor monitor have any
visible operands in Intel mode. The first operand of monitor is
%rax in 64-bit mode.
2005-03-29 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/i386.exp: Run segment and inval-seg for i386. Run
x86-64-segment and x86-64-inval-seg for x86-64.
* gas/i386/intel.d: Expect movw for moving between memory and
segment register.
* gas/i386/naked.d: Likewise.
* gas/i386/opcode.d: Likewise.
* gas/i386/x86-64-opcode.d: Likewise.
* gas/i386/opcode.s: Use movw for moving between memory and
segment register.
* gas/i386/x86-64-opcode.s: Likewise.
* : Likewise.
* gas/i386/inval-seg.l: New.
* gas/i386/inval-seg.s: New.
* gas/i386/segment.l: New.
* gas/i386/segment.s: New.
* gas/i386/x86-64-inval-seg.l: New.
* gas/i386/x86-64-inval-seg.s: New.
* gas/i386/x86-64-segment.l: New.
* gas/i386/x86-64-segment.s: New.
include/opcode/
2005-03-29 H.J. Lu <hongjiu.lu@intel.com>
* i386.h (i386_optab): Don't allow the `l' suffix for moving
moving between memory and segment register. Allow movq for
moving between general-purpose register and segment register.
opcodes/
2005-03-29 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (SEG_Fixup): New.
(Sv): New.
(dis386): Use "Sv" for 0x8c and 0x8e.
* ppc-opc.c (insert_sprg, extract_sprg): New Functions.
(powerpc_operands <SPRG>): Call the above. Bit field is 5 bits.
(SPRG_MASK): Delete.
(XSPRG_MASK): Mask off extra bits now part of sprg field.
(powerpc_opcodes): Asjust mfsprg and mtsprg to suit new mask. Move
mfsprg4..7 after msprg and consolidate.
gas/testsuite
* gas/ppc/booke.s: Add new m[t,f]sprg testcases.
* gas/ppc/booke.d: Likewise.
* opcodes/arc-dis.c:Add enum a4_decoding_class.
(dsmOneArcInst): Use the enum values for the decoding class
Remove redundant case in the switch for decodingClass value 11
2005-02-07 Jim Blandy <jimb@redhat.com>
* cgen-opc.scm: Don't load fixup.scm here. (See corresponding
changes in the opcodes directory.)
opcodes/ChangeLog:
2005-02-07 Jim Blandy <jimb@redhat.com>
* Makefile.am (CGEN): Load guile.scm before calling the main
application script.
* Makefile.in: Regenerated.
* cgen.sh: Be prepared for the 'cgen' argument to contain spaces.
Simply pass the cgen-opc.scm path to ${cgen} as its first
argument; ${cgen} itself now contains the '-s', or whatever is
appropriate for the Scheme being used.
2005-01-31 Jan Beulich <jbeulich@novell.com>
* config/tc-ia64.c (parse_operands): Also handle alloc without first
input being ar.pfs.
gas/testsuite/
2005-01-31 Jan Beulich <jbeulich@novell.com>
* gas/ia64/pseudo.[ds]: New.
* gas/ia64/ia64.exp: Run new test.
opcodes/
2005-01-31 Jan Beulich <jbeulich@novell.com>
* ia64-gen.c (NELEMS): Define.
(shrink): Generate alias with missing second predicate register when
opcode has two outputs and these are both predicates.
* ia64-opc-i.c (FULL17): Define.
(ia64_opcodes_i): Add mov-to-pr alias without second input. Use FULL17
here to generate output template.
(TBITCM, TNATCM): Undefine after use.
* ia64-opc-m.c (ia64_opcodes_i): Add alloc alias without ar.pfs as
first input. Add ld16 aliases without ar.csd as second output. Add
st16 aliases without ar.csd as second input. Add cmpxchg aliases
without ar.ccv as third input. Add cmp8xchg16 aliases without ar.csd/
ar.ccv as third/fourth inputs. Consolidate through...
(CMPXCHG_acq, CMPXCHG_rel, CMPXCHG_1, CMPXCHG_2, CMPXCHG_4, CMPXCHG_8,
CMPXCHGn, CMP8XCHG16, CMPXCHG_ALL): Define.
* ia64-asmtab.c: Regenerate.
* mips-dis.c (no_aliases): New disassembly option flag.
(set_default_mips_dis_options): Init no_aliases to zero.
(parse_mips_dis_option): Handle no-aliases option.
(print_insn_mips): Ignore table entries that are aliases
if no_aliases is set.
(print_insn_mips16): Ditto.
* mips-opc.c (mips_builtin_opcodes): Add initializer column for
new pinfo2 member and add INSN_ALIAS initializers as needed. Also
move WR_MACC and RD_MACC initializers from pinfo to pinfo2.
* mips16-opc.c (mips16_opcodes): Ditto.
2005-01-12 H.J. Lu <hongjiu.lu@intel.com>
* i386/i386.exp: Run "sib".
* gas/i386/sib.d: New file.
* gas/i386/sib.s: Likewise.
opcodes/
2005-01-12 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (OP_E): Ignore scale when index == 0x4 in SIB.
* configure.in: Don't define SKIP_ZEROES.
* configure: Regenerate.
* objdump.c (disassemble_data): Set skip_zeroes and
skip_zeroes_at_end in disasm_info to defaults.
(DEFAULT_SKIP_ZEROES): Rename from SKIP_ZEROES and always define.
(DEFAULT_SKIP_ZEROES_AT_END): Rename from SKIP_ZEROES_AT_END and
always define.
(disassemble_bytes): Use skip_zeroes and skip_zeroes_at_end from
objdump_disasm_info.
include/:
* dis-asm.h (struct disassemble_info): Add skip_zeroes and
skip_zeroes_at_end.
opcodes/:
* disassemble.c (disassemble_init_for_target) <case
bfd_arch_ia64>: Set skip_zeroes to 16.
<case bfd_arch_tic4x>: Set skip_zeroes to 32.
* crx-opc.c (crx_optab): Mark all rbase_disps* operands as signed.
(no_op_insn): Initialize array with instructions that have no
operands.
* crx-dis.c (make_instruction): Get rid of COP_BRANCH_INS operand swapping.
* elf32-arm.c (PLT_THUMB_STUB_SIZE): Define.
(elf32_arm_plt_thumb_stub): New.
(struct elf32_arm_link_hash_entry): Add plt_thumb_refcount
and plt_got_offset.
(elf32_arm_link_hash_traverse): Fix typo.
(elf32_arm_link_hash_table): Add obfd.
(elf32_arm_link_hash_newfunc): Initialize new fields.
(elf32_arm_copy_indirect_symbol): Copy plt_thumb_refcount.
(elf32_arm_link_hash_table_create): Initialize obfd.
(record_arm_to_thumb_glue): Mark the glue as a local ARM function.
(record_thumb_to_arm_glue): Mark the glue as a local Thumb function.
(bfd_elf32_arm_get_bfd_for_interworking): Verify that the
interworking BFD is not dynamic.
(bfd_elf32_arm_process_before_allocation): Handle R_ARM_PLT32. Do
not emit glue for PLT references.
(elf32_arm_final_link_relocate): Handle Thumb functions. Do not
emit glue for PLT references. Support the Thumb PLT prefix.
(elf32_arm_gc_sweep_hook): Handle R_ARM_THM_PC22 and
plt_thumb_refcount.
(elf32_arm_check_relocs): Likewise.
(elf32_arm_adjust_dynamic_symbol): Handle Thumb functions and
plt_thumb_refcount.
(allocate_dynrelocs): Handle Thumb PLT references.
(elf32_arm_finish_dynamic_symbol): Likewise.
(elf32_arm_symbol_processing): New function.
(elf_backend_symbol_processing): Define.
opcodes/
* arm-dis.c (WORD_ADDRESS): Define.
(print_insn): Use it. Correct big-endian end-of-section handling.
gas/testsuite/
* gas/arm/mapping.d: Expect F markers for Thumb code.
* gas/arm/unwind.d: Update big-endian pattern.
ld/
* emultempl/armelf.em (arm_elf_set_bfd_for_interworking): Don't use
a dynamic object for stubs.
ld/testsuite/
* ld-arm/mixed-app.d, ld-arm/mixed-app.r, ld-arm/mixed-app.s,
ld-arm/mixed-app.sym, ld-arm/mixed-lib.d, ld-arm/mixed-lib.r,
ld-arm/mixed-lib.s, ld-arm/mixed-lib.sym, ld-arm/arm-dyn.ld,
ld-arm/arm-lib.ld: New files.
* ld-arm/arm-app-abs32.d, ld-arm/arm-app-abs32.r, ld-arm/arm-app.d,
ld-arm/arm-app.r, ld-arm/arm-lib-plt32.d, ld-arm/arm-lib-plt32.r,
ld-arm/arm-lib.d, ld-arm/arm-lib.r, ld-arm/arm-static-app.d,
ld-arm/arm-static-app.r: Update for big-endian.
* ld-arm/arm-elf.exp: Run the new tests.
* cris-dis.c (TRACE_CASE): Define as (disdata->trace_case).
(struct cris_disasm_data): New type.
(format_reg, format_hex, cris_constraint, print_flags)
(get_opcode_entry): Add struct cris_disasm_data * parameter. All
callers changed.
(format_sup_reg, print_insn_crisv32_with_register_prefix)
(print_insn_crisv32_without_register_prefix)
(print_insn_crisv10_v32_with_register_prefix)
(print_insn_crisv10_v32_without_register_prefix)
(cris_parse_disassembler_options): New functions.
(bytes_to_skip, cris_spec_reg): Add enum cris_disass_family
parameter. All callers changed.
(get_opcode_entry): Call malloc, not xmalloc. Return NULL on
failure.
(cris_constraint) <case 'Y', 'U'>: New cases.
(bytes_to_skip): Handle 'Y' and 'N' as 's'. Skip size is 4 bytes
for constraint 'n'.
(print_with_operands) <case 'Y'>: New case.
(print_with_operands) <case 'T', 'A', '[', ']', 'd', 'n', 'u'>
<case 'N', 'Y', 'Q'>: New cases.
(print_insn_cris_generic): Emit "bcc ." for zero and CRISv32.
(print_insn_cris_with_register_prefix)
(print_insn_cris_without_register_prefix): Call
cris_parse_disassembler_options.
* cris-opc.c (cris_spec_regs): Mention that this table isn't used
for CRISv32 and the size of immediate operands. New v32-only
entries for bz, pid, srs, wz, exs, eda, dz, ebp, erp, nrp, ccs and
spc. Add v32-only 4-byte entries for p2, p3, p5 and p6. Change
ccr, ibr, irp to be v0..v10. Change bar, dccr to be v8..v10.
Change brp to be v3..v10.
(cris_support_regs): New vector.
(cris_opcodes): Update head comment. New format characters '[',
']', space, 'A', 'd', 'N', 'n', 'Q', 'T', 'u', 'U', 'Y'.
Add new opcodes for v32 and adjust existing opcodes to accommodate
differences to earlier variants.
(cris_cond15s): New vector.
2004-11-04 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (set_intel_syntax): Allow % in symbol names when
intel syntax and no register prefix, allow $ in symbol names when
intel syntax.
(set_16bit_gcc_code_flag): Replace literal 'l' by LONG_MNEM_SUFFIX.
(intel_float_operand): Add fourth return value indicating math control
operations. Make classification more precise.
(md_assemble): Complain if memory operand of mov[sz]x has no size
specified.
(parse_insn): Translate word operands to floating point instructions
operating on integers as well as control instructions to short ones
as expected by AT&T syntax. Translate 'd' suffix to short one only for
floating point instructions operating on non-integer operands.
(match_template): Remove fldcw special case. Adjust q-suffix handling
to permit it on fild/fistp/fisttp in AT&T mode.
(process_suffix): Don't guess DefaultSize insns' suffix from
stackop_size for certain floating point control instructions. Guess
suffix for branch and [ls][gi]dt based on flag_code. Split error
messages for Intel and AT&T syntax, and make the condition more strict
for the former. Adjust suppressing of generation of operand size
overrides.
(intel parser): Allow the full set of MASM operators. Add FWORD, TBYTE,
OWORD, and XMMWORD operand size specifiers (TBYTE replaces XWORD). Add
more error checking.
* config/tc-i386.h (BYTE_PTR WORD_PTR DWORD_PTR QWORD_PTR XWORD_PTR
SHORT OFFSET_FLAT FLAT NONE_FOUND): Remove unused defines.
gas/testsuite/
2004-11-04 Jan Beulich <jbeulich@novell.com>
* gas/i386/i386.exp: Execute new tests intelbad and intelok.
* gas/i386/intelbad.[sl]: New test to check for various things not
permitted in Intel mode.
* gas/i386/intel.d, gas/i386/opcode.d, gas/i386/x86-64-opcode.d:
Adjust for change to segment register store.
* gas/i386/intelok.[sd]: New test to check various Intel mode specific
things get handled correctly.
* gas/i386/x86_64.[sd]: Remove unsupported constructs referring to
'high' and 'low' parts of an operand, which the parser previously
accepted while neither telling that it's not supported nor that it
ignored the remainder of the line following these supposed keywords.
include/opcode/
2004-11-04 Jan Beulich <jbeulich@novell.com>
* i386.h (sldx_Suf): Remove.
(FP, l_FP, sl_FP, x_FP): Don't imply IgnoreSize.
(q_FP): Define, implying no REX64.
(x_FP, sl_FP): Imply FloatMF.
(i386_optab): Split reg and mem forms of moving from segment registers
so that the memory forms can ignore the 16-/32-bit operand size
distinction. Adjust a few others for Intel mode. Remove *FP uses from
all non-floating-point instructions. Unite 32- and 64-bit forms of
movsx, movzx, and movd. Adjust floating point operations for the above
changes to the *FP macros. Add DefaultSize to floating point control
insns operating on larger memory ranges. Remove left over comments
hinting at certain insns being Intel-syntax ones where the ones
actually meant are already gone.
opcodes/
2004-11-04 Jan Beulich <jbeulich@novell.com>
* i386-dis.c (Eq, Edqw, indirEp, Gdq, I1): Define.
(indirEb): Remove.
(Mp): Use f_mode rather than none at all.
(t_mode, dq_mode, dqw_mode, f_mode, const_1_mode): Define. t_mode
replaces what previously was x_mode; x_mode now means 128-bit SSE
operands.
(dis386): Make far jumps and calls have an 'l' prefix only in AT&T
mode. movmskpX's, pextrw's, and pmovmskb's first operands are Gdq.
pinsrw's second operand is Edqw.
(grps): 1-bit shifts' and rotates' second operands are I1. cmpxchg8b's
operand is Eq. movntq's and movntdq's first operands are EM. s[gi]dt,
fldenv, frstor, fsave, fstenv all should also have suffixes in Intel
mode when an operand size override is present or always suffixing.
More instructions will need to be added to this group.
(putop): Handle new macro chars 'C' (short/long suffix selector),
'I' (Intel mode override for following macro char), and 'J' (for
adding the 'l' prefix to far branches in AT&T mode). When an
alternative was specified in the template, honor macro character when
specified for Intel mode.
(OP_E): Handle new *_mode values. Correct pointer specifications for
memory operands. Consolidate output of index register.
(OP_G): Handle new *_mode values.
(OP_I): Handle const_1_mode.
(OP_ESreg, OP_DSreg): Generate pointer specifications. Indicate
respective opcode prefix bits have been consumed.
(OP_EM, OP_EX): Provide some default handling for generating pointer
specifications.
* crx-dis.c (enum REG_ARG_TYPE): New, replacing COP_ARG_TYPE.
(getregliststring): Support HI/LO and user registers.
* crx-opc.c (crx_instruction): Update data structure according to the rearrangement done in CRX opcode header file.
(crx_regtab): Likewise.
(crx_optab): Likewise.
(crx_instruction): Reorder load/stor instructions, remove unsupported formats.
support new Co-Processor instruction 'cpi'.
