going through md_number_to_chars. This permits handling symbolic
arguments when the size is larger than sizeof (valueT), if
TC_CONS_FIX_NEW is prepared to handle the case (as it is on MIPS).
(parse_args): Code moved from main.
Recognize --help and --version.
* config/tc-ns32k.h: Define TC_NS32K.
* doc/as.texinfo: Document all of the target-independent command
line options.
* config/tc-alpha.c (machine): New variable.
(load_insn): New macro.
(load_insn_table): New function.
(md_begin): Call load_insn_table, once for basic instructions and
once for appropriate PAL instruction table.
(md_parse_option): Set `machine' based on -m##### arguments.
* config/alpha-opcode.h (alpha_pal21064_opcodes): Split out from alpha_opcodes.
(alpha_pal21164_opcodes): New table.
(NUM21064OPCODES, NUM21164OPCODES): New macros.
throughout code.
(is_complex): Delete definition and support for complex relocation
types.
(tc_gen_reloc): Delete special unwind crud for ELF. Simplify and
rewrite ELF code based on 94-02-02 PA ELF draft spec.
(pa_build_unwind_subspace): Use standard PARISC_DIR32 relocs for
the unwind descriptors.
ELF code.
* gas/hppa/reloc/roundmode.s: Avoid "S" and "D" modes, ELF does
not support them.
* gas/hppa/unsorted/unsorted.exp: Tweak expected output to match
new ELF code.
table if it's already been set in the output bfd.
(symbol_begin) [! EMIT_SECTION_SYMBOLS] [RELOC_REQUIRES_SYMBOL]: Don't use
bfd_abs_section.symbol for gas absolute symbol.
* obj-coffbfd.h (TARGET_FORMAT) [TC_I960]: Ditto.
* obj-coff.c (coff_frob_section): Round up the size of every section to a
multiple of the alignment, so that BFD doesn't surprise us.
Eliminate many simple differences between the two COFF back ends:
* obj-coffbfd.c: Removed all uses of DEFUN and DEFUN_VOID. Made minor
stylistic changes, deleted some register declarations.
(stack_top): Deleted.
(symbol_to_chars): Use absolute_section and reg_section instead of the
corresponding SEG_* symbols.
(obj_coff_endef, tag_find_or_make, fixup_segment): Likewise.
(stack typedef, stack_init, stack_delete, stack_push, stack_pop): Moved to just
after pseudo-op table. All functions now static.
(stack_delete): Removed declaration.
(tag_init, tag_insert, tag_find_or_make, tag_find): Moved to just after stack
functions.
* obj-coffbfd.h: Reordered some declarations and macros.
(stack_init, stack_delete, stack_push, stack_pop): Don't declare.
(stack typedef): Deleted.
(SYMBOLS_NEED_BACKPOINTERS): Always undef then define; don't test.
(SYM_AUXENT): New macro.
(SA_GET_*, SA_SET_*): Define in terms of SYM_AUXENT when feasible.
(SF_GET_*, SF_SET_*): Define in terms of SF_GET when feasible.
(SA_GET_SYM_TAGNDX, SA_GET_SYM_ENDNDX, SA_SET_SYM_TAGNDX, SA_SET_SYM_ENDNDX,
object_headers typedef, data_section_header, text_section_header): Delete
non-BFD_HEADERS versions, since we always define that symbol now.
* obj-coff.c (stack_top): Deleted.
(obj_coff_endef, obj_coff_dim, obj_coff_line, obj_coff_size, obj_coff_scl,
obj_coff_tag, obj_coff_type, obj_coff_val): Change argument name from "ignored"
to "ignore".
(obj_coff_val): Use frag_now_fix.
(obj_pseudo_table): Removed IGNORE_DEBUG version, since it doesn't get used.
(stack typedef, stack_init, stack_delete, stack_push, stack_pop): Moved to just
after pseudo-op table. All functions now static.
(tag_init, tag_insert, tag_find_or_make, tag_find): Moved to just after stack
functions.
* obj-coff.h: Reordered some declarations and macros. Protected against
multiple inclusions.
(stack_init, stack_delete, stack_push, stack_pop): Don't declare.
(stack typedef): Deleted.
(SYMBOLS_NEED_BACKPOINTERS): Always undef then define; don't test.
(stdoutput): Deleted declaration.
(TARGET_FORMAT) [TC_I386]: Don't define if already defined.
BFD_ASSEMBLER.
* subsegs.c (subseg_change): Initialize fix_tail field.
(subseg_get): Likewise.
* write.c (frags_chained): New static variable.
(fix_new_internal): If frags_chained is set, use fix_root and
fix_tail from seg_info (now_seg), rather than frchain_now.
(chain_frchains_together_1): Set fix_tail field.
(chain_frchains_together): Set frags_chained.
REGISTER_PREFIX_OPTIONAL, if defined, or zero.
(m68k_reg_parse): If flag_reg_prefix_optional is set, permit register prefix to
be absent.
(m68k_ip_op): Accept `&' also for immediate constants.
(insert_reg): Don't bother with (two!?) sanity checks of the symbol table when
inserting each register.
(m68k_parse_long_option): New function. Set flag_reg_prefix_optional if
"register-prefix-optional" is passed.
* tc-m68k.h (REGISTER_PREFIX): Always define if not already defined.
(OPTIONAL_REGISTER_PREFIX): Don't define.
(REGISTER_PREFIX_OPTIONAL): If not already defined, define as zero
or one depending on M68KCOFF.
Some changes to help Apollo support, from troy@cbme.unsw.edu.au:
* tc-m68k.c (DATA, ADDR, SP, FPREG, COPNUM, BAD, BAC): Define as macros instead
of enumerators, since the Apollo compiler can't handle "enumVal1, enumVal2 =
enumVal1" when defining an enum type.
(make_pcrel_absolute) [NO_PCREL_RELOCS]: New function.
(tc_coff_fix2rtype) [NO_PCREL_RELOCS]: Generate only R_RELBYTE, R_DIR16, and
R_DIR32 relocs.
* tc-m68k.h [TE_APOLLO] (COFF_MAGIC, COFF_AOUTHDR_MAGIC): Use Apollo versions.
[TE_APOLLO] (OBJ_COFF_OMIT_OPTIONAL_HEADER): Undefine. That is, do include the
optional header for Apollo target.
(COFF_MAGIC): Don't define as MC68MAGIC if it's already defined.
* tc-m68k.h [TE_DELTA] (LEX_PCT): Define as 1, so that `%' can be used within a
label name.
* tc-m68k.h (m68k_init_after_args): Declare.
(tc_init_after_args): Define as m68k_init_after_args.
* tc-m68k.c (m68k_init_after_args): New function, containing one-shot code from
md_assemble. Added warning for combination of 68040 and 68851.
(md_assemble): Startup-time code deleted.
with the preceding instruction even if .set nobopt has been seen.
.set nobopt actually controls whether to bring up an instruction
from the branch target, which gas does not currently support.
BFD_ASSEMBLER is not defined, and all conditionals relating to such code. No
such targets remain.
Fixes for stabs-in-coff:
* config/obj-coff.c: Include subsegs.h.
(coff_frob_section): New function.
(obj_coff_init_stab_section): New function.
* config/obj-coff.h (obj_coff_init_stab_section, coff_frob_section): Declare.
(obj_frob_section): New macro; uses coff_frob_section.
(INIT_STAB_SECTION): New macro; uses obj_coff_init_stab_section.
defaults for defined, private, and spnum fields for the
$TEXT$ and $PRIVATE$ spaces. Do not clobber spnum. Do
not reset the segment if just updating a space.
(pa_spaces_begin): Set BFD section flags for all built-in
subspaces.
(add_procedure): Set first_proc_ptr if it hasn't been set.
(ecoff_build_lineno): If the first procedure does not start at
address zero, insert a dummy line to compensate.
* configure.in: Set ALL_OBJ_DEPS in output Makefile.
Based on suggestions from <BAILEY@hmivax.humgen.upenn.edu> (Charles Bailey):
* vmsconf.sh: In generated file, get ".obj" suffix right, build source files
from other directories into objects in the current directory, and specify PSECT
attributes explicitly to linker. Also added missing label.
* Makefile.in (stamp-mk.com): Reference new variable VMS_OTHER_OBJS for list of
non-local object files, instead of listing them here.
(VMS_OTHER_OBJS): New variable, added more libiberty files.
* make-gas.com: Regenerated.
* config/ho-vms.h (unlink): Define as delete.
* config-gas.com: Fix quoting on TARGET_CANONICAL definition. Delete files
before creating them.
* config/tc-mips.c (macro_build): Permit BFD_RELOC_PCREL_LO16 for
certain cases of 'i', 'j' and 'o'. Change 'u' to take an
argument, the reloc type.
(load_register): Pass reloc type to macro_build for 'u'.
(macro): Likewise. For M_LA_AB permit a difference expression
when generating embedded PIC code between an arbitrary symbol and
a symbol in the .text section.
(mips_force_relocation): Force BFD_RELOC_PCREL_HI16_S and
BFD_RELOC_PCREL_LO16 to be emitted.
(md_apply_fix): Check that most relocs are not PC relative.
Handle BFD_RELOC_PCREL_HI16_S and BFD_RELOC_PCREL_LO16.
(tc_gen_reloc): Change #error to as_fatal. Handle
BFD_RELOC_PCREL_LO16 and BFD_RELOC_PCREL_HI16_S.
* subsegs.c (subsegs_begin): Call memset with args in the correct
order.
(subseg_get): Clear newly allocated seginfo, set its pointer slots
to NULL instead of 0.
Fixes a problem observed in sparc-lynx progressive.
macro_build for nori case.
(SWITCH_TABLE): Define.
(mips_force_relocation): Force a relocation for a switch table
entry.
(md_apply_fix): Write switch table entry value into file.
(tc_gen_reloc): Use BFD_RELOC_GPREL32 for a switch table entry,
and set the addend to the difference between the reloc address and
the subtrahend.
(elf_tc_make_sections): Likewise.
(hppa_tc_make_sections, hppa_tc_symbol): Delete extern decls.
* config/tc-hppa.c (hppa_tc_make_sections): Delete function.
(hppa_tc_symbol): Likewise.
* config/obj-elf.c (elf_frob_file): Delete elf_tc_symbol and
elf_tc_make_sections stuff. It was there to support PA braindamage
which has been fixed, and in the case of elf_tc_make_sections is
redundant with elf_tc_final_processing.
embedded PIC code, accept the difference between two local symbols
as being constant.
(mips_force_relocation): Only force a reloc to be generated for a
PC relative fixup.
(md_apply_fix): For BFD_RELOC_32 and BFD_RELOC_LO16, put the fixup
value into the file if the fixup will not generate a reloc.
flag rather than signedp field. Only permit extended range if
PPC_OPERAND_SIGNOPT flag is set and assembling in 32 bit mode.
Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
(ppc_arch): Check for PPC_OPCODE_PPC before PPC_OPCODE_POWER.
(md_begin): If an instruction has a size specific flag set, only
add it if we are assembling that size.
branch with an instruction that uses $at, in case the branch is
later expanded.
(macro): If EMBEDDED_PIC, case M_JAL_A may use $at.
(md_pcrel_from): If not OBJ_AOUT, return 4 for an undefined symbol
to make it pcrel_offset.
(tc_gen_reloc): If not OBJ_AOUT, set the reloc addend to
reloc->address; another gruesome hack to get gas reloc handling to
do the right thing.
(T12): New macro.
(emit_insn): New function.
(md_assemble): Call it.
(alpha_force_relocation): Handle BFD_RELOC_26, for call_pal instructions.
(lituse_pending): New variable. Set by anything that generates a LITERAL
reloc, cleared by anything that generates a LITUSE reloc, tested by code that
might want to emit a LITUSE reloc.
(emit_unaligned_io): New function. Currently calls md_assemble, but it should
eventually be converted to generate the insn itself and call emit_insn directly.
(emit_load_unal, emit_store_unal, emit_byte_manip_r, emit_extract_r,
emit_insert_r, emit_mask_r, emit_sign_extend, emit_bis_r): Likewise.
(alpha_ip, case 'I'): Handle with BFD_RELOC_23.
(alpha_ip, label get_macro): Don't emit the final instruction if the opcode is
zero.
(alpha_ip, case 'B', subcase 'd'): New case, for subword and unaligned memory
access macros.
(md_apply_fix): Handle BFD_RELOC_26. Generate an error message if the value
can't be resolved.
(mips_pic): Change from int to enum mips_pic_level. Change all
uses (0 becomes NO_PIC, 2 becomes SVR4_PIC).
(load_address): Handle EMBEDDED_PIC.
(macro): Handle EMBEDDED_PIC in all PIC cases.
(md_parse_option): Accept -membedded-pic to use EMBEDDED_PIC. If
OBJ_ELF, accept -KPIC and -call_shared to use SVR4_PIC and accept
-non_shared to use NO_PIC (this is how the Irix 5 assembler
works). Do not permit -G with SVR4_PIC.
(s_abicalls): Warn if -G was used, and force -G 0.
(tc_gen_reloc): Set reloc->addend to 0 for a PC relative reloc for
anything but a.out, not just for ELF. For ECOFF, don't generate a
BFD_RELOC_16_PCREL_S2 reloc unless using EMBEDDED_PIC.
is called.
(dump_section_relocs): Note whether a symbol is a section symbol or not.
(adjust_reloc_syms): For now, always supply an absolute symbol for fixups
without symbols but not yet `done'. Use section_symbol to get the symbol,
instead of going directly for abs_symbol.
(write_relocs) [DEBUG4]: Abort if any symbol referred to by a reloc is not a
section symbol and is not in the symbol table.
(set_symtab): New function, broken out from write_object_file. Counts symbol
table instead of relying on an earlier count.
(write_object_file): Call set_symtab, but do it after potentially invoking the
*_frob_file macros. Don't bother counting symbols. Call symbol_remove,
instead of expanding it in place. Moved the conditionalized `object_file_size'
declaration down to conditionalized block where it's used. When using the
absolute symbol for a fixup without a symbol, set sy_used_in_reloc.
(write_object_file) [BFD_ASSEMBLER]: Call section_symbol to get the correct
symbol for the absolute section.
BFD_ASSEMBLER; I think all such targets that are supported will be matched by
real CPU-OS combinations earlier in the case statement.
(targets *-*-coff*, *-sysv*, *-*-sco*, *-*-sysv32): Deleted. Made some
comments about the dpx2 configuration, but left it disabled, since it couldn't
be reached before.
(target a29k-amd-ebmonold): Deleted.
with S_GET_VALUE. Skip debug symbols to avoid "a really nasty bug". (From
Holger Teutsch, holger@botbso.rhein-main.de.)
(VMS_write_object_file): For "__vt.*" symbols, set S_GET_OTHER field. (Also
from Holger Teutsch.) Watch for a would-be register mask that spans frags.
* config/alpha-opcode.h (ldif, ldig, ldis, ldit): New patterns.
* config/tc-alpha.c (lit8_sec, lit4_sec, lit8_sym, lit4_sym): New variables.
(create_literal_section): New function.
(create_lita_section): Now a macro.
(get_lit8_offset, get_lit4_offset): New functions.
(maybe_set_gp): New function.
(select_gp_value): Call it.
(load_expression): Preserve addend if symbol is a section symbol.
(alpha_ip): Handle new operand type `F' for floating-point constants; store
them in .lit{4,8} sections.
(alpha_ip, case 'G'): Emit LITUSE relocations for symbol exprs.
(obj_coff_section): Declare.
(obj_pseudo_table): Make it available only if MANY_SECTIONS.
(obj_symbol_to_chars) [CROSS_COMPILE]: Some attemps to make this work. It
still doesn't. It now fails to compile, instead of silently compiling to do
nothing.
* config/obj-coff.h (SEPARATE_STAB_SECTIONS): Define only if MANY_SECTIONS.
(OBJ_PROCESS_STAB) [! MANY_SECTIONS]: New macro, just emits a warning.
ic960coff.
* config/ic960coff.mt: New file.
* config/obj-coffbfd.h [TC_I960]: Include coff/i960.h.
(TARGET_FORMAT) [TC_I960]: Use coff-Intel-little.
* config/te-ic960.h (CROSS_COMPILE): Don't undef this. We'll always build
little-endian object files.
* config/tc-i960.c (md_reloc_size): Don't define at all if BFD or
BFD_ASSEMBLER is defined.
(mem_fmt): Since COFF doesn't handle callx relocations yet, treat them like
normal 32-bit relocations.
(md_apply_fix): For callx relocations, store zero.
(tc_bout_fix_to_chars): Store symbol idx for all callx relocations, regardless
of link-relax setting.
(tc_coff_fix2rtype, tc_coff_sizemachdep): New functions.
(i960_handle_align) [! OBJ_BOUT]: If link-relax option is selected, print an
error message and clear it.
* config/tc-i960.h (BFD_ARCH, COFF_FLAGS, COFF_MAGIC, TC_COUNT_RELOC,
TC_COFF_FIX2RTYPE, TC_COFF_SIZEMACHDEP, tc_fix_adjustable): New macros.
(tc_coff_fix2rtype, tc_coff_sizemachdep): Declare.
(objdump_start): Deleted unused proc.
(objdump_start_common): Merged into objdump_start_no_subdir.
* gas/alpha/fp.exp: Use objdump instead of objdump_start_no_subdir, since the
former actually waits for objdump to finish. Specify .rdata section only.
Make comment indicate Alpha architecture rather than SPARC.
* gas/alpha/fp.d: Omit .reginfo patterns. Just use "." to match
against ASCII code 0x2a ("*", special in regexp).
* gas/sun4/addend.exp: Use objdump instead of objdump_start_no_subdir.
* configure.in: If cpu is powerpc*, use ppc.
(ppc-*-sysv4*): Use object format elf.
* config/tc-ppc.h: Only declare a number of things if OBJ_COFF is
defined.
(TARGET_ARCH): Make it call ppc_arch.
(ppc_arch): Declare.
(TARGET_FORMAT): Set based on OBJ_COFF or OBJ_ELF.
(NO_STRING_ESCAPES): Define.
(LOCAL_LABEL, FAKE_LABEL_NAME): Define for OBJ_ELF.
* config/tc-ppc.c: Only define a number of functions of OBJ_COFF
is defined.
(md_pseudo_table): Most pseudo-ops are OBJ_COFF specific. Added
OBJ_COFF specific "bi" and "ei".
(md_parse_option): Fix handling of -u. Make -m601 set
PPC_OPCODE_601. If OBJ_ELF, accept -V and -Q.
(ppc_set_cpu): New function.
(ppc_arch): New function.
(md_begin): Call ppc_set_cpu.
(ppc_insert_operand): For a signed operand accept an unsigned
value, for IBM compatibility.
(ppc_byte): Don't call stringer for strings; instead, treat two
double quotes as a single double quote.
(ppc_comm): Set sy_tc.output for a .lcomm symbol.
(ppc_biei): New function.
(ppc_tc): If not OBJ_COFF, ignore first argument.
(ppc_fix_adjustable): Call as_bad_where, not as_bad.
(ppc_is_toc_sym): New function.
(md_apply_fix): Use ppc_is_toc_sym. Handle BFD_RELOC_16 and
BFD_RELOC_8.
(2) move explanation of new MIPS options from summary section to MIPS-options
section; add summaries in appropriate spots.
(3) usual minor rephrasing in passing.
* config/obj-coffbfd.c (obj_coff_init_stab_section): Use memset
instead of memcpy to zero the initial stab symbol, duh.
* config/obj-elf.c (obj_elf_init_stab_section): Ditto.
* config/obj-som.c (obj_som_init_stab_section): Ditto.
precedence questions.
(addr32): New static variable.
(md_parse_option): Set it for "-32addr".
(load_symbol_address): If addr32 is set, use ldl instead of ldq.
return type to valueT, to agree with tc.h.
(alpha_do_align): Local static array nop_pattern is now unsigned
char, to avoid overflow warnings.
* tc-alpha.h (md_section_align): Delete declaration.
* obj-ecoff.c (ecoff_frob_file): Ensure that ecoff_data for
output bfd is non-null before indirecting through it.
Crock to get GP set right:
* tc-alpha.c (alpha_frob_ecoff_data): Renamed from alpha_frob_file.
* tc-alpha.h (tc_frob_file): Macro deleted.
* obj-ecoff.c (ecoff_frob_file) [TC_ALPHA]: Call alpha_frob_ecoff_data, then
fill in optional-header info with gp value and register masks.
* config/obj-coffbfd.c (obj_coff_init_stab_section): Zero the
initial stab symbol after allocating it.
* config/obj-elf.c (obj_elf_init_stab_section): Ditto.
This fixes a critical bug observed in Q4 for Lynx.
* subsegs.h (struct frchain): If BFD_ASSEMBLER, added new fields
fix_root and fix_tail.
(segment_info_type): If BFD_ASSEMBLER, don't define fix_tail
field.
* write.c (fix_new_internal): If BFD_ASSEMBLER, set fix_rootP and
fix_tailP based on frchain_now, not seg_info (now_seg).
(chain_frchains_together_1): Chain the subsegment relocs together.
* subsegs.c (subseg_change): Don't clear fix_tail field.
(subseg_get): Likewise.
* literal.c (add_to_literal_pool): Look through the relocs via
frchain_now, not seginfo.
* write.c (write_object_file): Simplified usage of obj_frob_symbol
and tc_frob_symbol. Always call both if the symbol is going to be
output.
* write.c (relax_segment): Use %ld rather than %d when printing
fragP->fr_var, and cast it to long.
ecoff_undefined.
(ecoff_frob_symbol): Don't check ecoff_undefined.
(ecoff_build_symbols): Get size of an undefined symbol from
sym->ecoff_extern_size, not S_GET_VALUE (sym).
declare it differently.
(Actually, the only use is in xmalloc; if xmalloc didn't also zero out the
region of memory, I'd delete the function altogether and use the libiberty
version...)
dot_bss_symbol): Don't define if BFD_ASSEMBLER.
(obj_symbol_to_chars): bfd_coff_swap_aux_out now takes more
arguments.
(coff_line_base): Renamed from line_base. Changed all uses.
(coff_add_linesym): Renamed from add_line_sym. Made non-static.
Changed all uses.
* config/obj-coff.h: If TC_PPC, include coff/rs6000.h.
(S_SET_STORAGE_CLASS, S_GET_STORAGE_CLASS): Declare if
BFD_ASSEMBLER.
(coff_line_base): Declare.
(coff_add_linesym): Declare if BFD_ASSEMBLER.
This version formats cleanly under makeinfo, and in Cygnus format.
Default FSF format works without error, but tables of machine
instructions for some machines have stupid page boundaries (FSF
version uses larger page size).
(2) leading comments for future updates, about places to check for new
directives
(3) doc for new portable ".string" directive
(4) minor updates to dates etc.
not apocryphal.
apoc-ry-phal \-fel\ adj
(1590)
1 often cap: of or resembling the Apocrypha
2: of doubtful authenticity: SPURIOUS
syn see FICTITIOUS
pro-ver-bi-al \pre-'ver-be^--el\ adj
(1548)
1: of, relating to, or resembling a proverb
2: that has become a proverb or byword: commonly spoken of
for md_do_align macro, give it a chance to bypass all but recording of section
alignment.
(s_align_bytes, s_align_ptwo): Call do_align.
(s_lcomm) [TC_ALPHA]: Align object to largest power of two that divides object
size.
out because $CVSROOT was wrong...)
* write.c (write_object_file): If tc_frob_file is defined, call it
just before calling obj_frob_file.
* config/tc-alpha.c (alpha_gp_value): Renamed from gp_value
(references changed), and made non-static.
(getExpression): Return void.
(select_gp_value): Abort if gp_value is non-zero. Delete call to
non-existent bfd_set_gp_value.
(alpha_validate_fix): Function deleted.
(alpha_frob_symbol): Function deleted.
(alpha_local_label): Function deleted.
(alpha_frob_file): Renamed from alpha_end.
* config/tc-alpha.h (alpha_frob_symbol, alpha_validate_fix,
alpha_local_label, alpha_end): Declarations deleted.
(alpha_gp_value, alpha_frob_file): Declare.
(tc_frob_symbol, TC_VALIDATE_FIX, md_end): Macros deleted.
(LOCAL_LABEL): Move code here from tc-alpha.c:alpha_local_label.
(md_convert_frag): Simplified slightly.
(tc_frob_file): New macro.
just before calling obj_frob_file.
* config/tc-alpha.c (alpha_gp_value): Renamed from gp_value (refs changed), made
non-static.
(getExpression): Return void.
(select_gp_value): Abort if gp_value is non-zero. Delete call to non-existent
bfd_set_gp_value.
(alpha_validate_fix): Function deleted.
(alpha_frob_symbol): Function deleted.
(alpha_local_label): Function deleted.
(alpha_frob_file): Renamed from alpha_end.
* config/tc-alpha.h (alpha_frob_symbol, alpha_validate_fix, alpha_local_label,
alpha_end): Declarations deleted.
(alpha_gp_value, alpha_frob_file): Declare.
(tc_frob_symbol, TC_VALIDATE_FIX, md_end): Macros deleted.
(LOCAL_LABEL): Move code here from tc-alpha.c:alpha_local_label.
(md_convert_frag): Simplified slightly.
(tc_frob_file): New macro.
declare if BFD_ASSEMBLER.
(stack_pop): Correct test for stack underflow.
(obj_coff_endef, obj_coff_dim, obj_coff_line, obj_coff_size,
obj_coff_scl, obj_coff_tag, obj_coff_type, obj_coff_val): Declare
type of ignored argument to avoid gcc warning.
(align): Removed unused function.
Still to do:
- fix floating-point handling
- figure out if we can adapt to using ../opcodes/alpha-opc.h
- gcc bootstrap testing
- 32-bit mode support?
- test cross-assembly
* write.c (cvt_frag_to_fill): Don't assume that fr_var for rs_align or rs_org
frags will be 1.
(relax_segment): For rs_align, if fr_var is not 1, complain if
required padding is not a multiple of the size of the pad pattern.
(fixup_segment): Leave gp-relative relocations alone. For pcrel relocations
referring to the same segment, clear fx_pcrel when clearing fx_addsy.
* as.h: Adjust comments on rs_align.
* write.c, config/obj-{aout,bout,coff*}.c, config/tc-sparc.c: Query the fx_done
field instead of fx_addsy to see if the fixup still needs to be applied. Set
fx_done and clear fx_addsy both, for now. If TC_HANDLES_FX_DONE isn't defined,
assume md_apply_fix will only clear fx_addsy, and set fx_done accordingly after
returning.
* config/tc-sparc.h (TC_HANDLES_FX_DONE): Define.
* config/obj-coff.c (dot_text_symbol, dot_data_symbol, dot_bss_symbol): Defined
here, static.
* config/obj-aout.c [BFD_ASSEMBLER]: Undef NO_RELOC before including aout/aout64.h.
* write.c (write_object_file): If EMIT_SECTION_SYMBOLS is false, don't write
out a section symbol even if it's used in a relocation; assume relocations will
handle section numbers somehow. Rename "punt_it" label to "punt_it_if_unused"
to reflect it's true use.
(EMIT_SECTION_SYMBOLS): Default to 1.
(adjust_reloc_syms): Don't create a new symbol for an absolute
reference; just use the absolute section symbol.
(write_relocs): Make printout of reloc values dependent on flag DEBUG3, not
DEBUG2.
* config/obj-aout.h (EMIT_SECTION_SYMBOLS): Define as 0.
* config/obj-ecoff.h (EMIT_SECTION_SYMBOLS): Ditto.
(symbol_begin): Moved to end of file, so function inlining can work better.
(fb_label_count, fb_label_max): Default C static initializers are sufficient.
* symbols.h (dot_text_symbol, dot_data_symbol, dot_bss_symbol): Declarations
deleted.
