* config/tc-m32c.c (OPTION_H_TICK_HEX): Define.
(md_longopts): Add support for it.
(md_parse_option): Likewise.
* doc/as.texinfo (Overview): Add new m32c options.
* doc/c-m32c.texi (M32C-Modifiers): Likewise
* as.h: (enable_h_tick_hex): New.
* app.c (enable_h_tick_hex): New.
(LEX_IS_H): New.
(do_scrub_begin): Mark 'H' and 'h' as special if enable_h_tick_hex.
(do_scrub_chars): If enable_h_tick_hex and 'h', check for H'00
style hex constants and convert the input stream to 0x00 style.
(do_scrub_chars): If a 'X style character constant is found after
a symbol character (like you're or X'00), warn the user.
listings such as gas version, passed options, and time stamp.
(listing_general_info): New function.
(print_options): New function.
(print_single_option): New function.
(print_timestamp): New function.
(MAX_DATELEN): Define.
(listing_print): Add call to listing_general_info.
* listing.h (LISTING_GENERAL): Define.
(listing_print): Add new parameter.
* as.c (show_usage): Print new switch.
(parse_args): Parse new switch.
(main): Pass command line on to listing_print.
* NEWS: Mention this new feature.
* doc/as.texinfo: Document the new sub-option.
* gas/all/gas.exp: Check the performance of the -ag command line
switch.
PR gas/4517
2003-06-05 Michal Ludvig <mludvig@suse.cz>
* as.texinfo: Document new directives: .cfi_restore,
.cfi_undefined, .cfi_same_value, .cfi_return_column,
.cfi_remember_state and .cfi_restore_state.
2007-05-17 H.J. Lu <hongjiu.lu@intel.com>
2003-06-05 Michal Ludvig <mludvig@suse.cz>
* testsuite/gas/cfi/cfi-x86_64.s: Test new directives
and different writings of registers and numbers.
* testsuite/gas/cfi/cfi-x86_64.d: Updated pattern to
match the above change.
* doc/as.texinfo: Add -mvxworks-pic to the list of MIPS options.
* doc/c-mips.texi (-KPIC, -mvxworks-pic): Document.
* config/tc-mips.c (md_show_usage): Mention -mvxworks-pic.
200x-xx-xx Richard Sandiford <richard@codesourcery.com>
Phil Edwards <phil@codesourcery.com>
* doc/bfd.texinfo: Put the contents after the title page rather
than at the end of the document.
binutils/
200x-xx-xx Richard Sandiford <richard@codesourcery.com>
Phil Edwards <phil@codesourcery.com>
* doc/binutils.texi: Put the contents after the title page rather
than at the end of the document.
gas/
200x-xx-xx Richard Sandiford <richard@codesourcery.com>
Phil Edwards <phil@codesourcery.com>
* doc/as.texinfo: Put the contents after the title page rather
than at the end of the document.
gprof/
200x-xx-xx Richard Sandiford <richard@codesourcery.com>
Phil Edwards <phil@codesourcery.com>
* gprof.texi: Put the contents after the title page rather
than at the end of the document.
ld/
200x-xx-xx Richard Sandiford <richard@codesourcery.com>
Phil Edwards <phil@codesourcery.com>
* ld.texinfo: Put the contents after the title page rather
than at the end of the document.
* read.c (potable): Add "reloc".
(s_reloc): New function.
* write.c (reloc_list): New global var.
(resolve_reloc_expr_symbols): New function.
(write_object_file): Call it.
(write_relocs): Process reloc_list.
* write.h (struct reloc_list): New.
(reloc_list): Declare.
* Makefile.am (bfdver.h): Only set VERSION_PACKAGE in bfdver.texi
if nonempty.
* configure.in (REPORT_BUGS_TO): Do not use "URL:" prefix.
* Makefile.in, configure, doc/Makefile.in: Regenerate.
binutils:
* doc/binutils.texi: Include VERSION_PACKAGE when reporting
version.
gas:
* doc/as.texinfo: Include VERSION_PACKAGE when reporting version.
gprof:
* Makefile.am (TEXI2POD): Include $(AM_MAKEINFOFLAGS).
(AM_MAKEINFOFLAGS, TEXI2DVI): Define with -I ../bfd/doc.
* Makefile.in: Regenerate.
* gprof.texi: Include bfdver.texi. Report both VERSION_PACKAGE
and VERSION.
ld:
* ld.texinfo: Include VERSION_PACKAGE when reporting version.
* configure.in (REPORT_BUGS_TEXI): Define to Texinfo version of
bug-reporting URL.
* doc/Makefile.am (config.texi): Define BUGURL.
* doc/binutils.texi: Use BUGURL. Remove text about large files
and uuencoding.
* Makefile.in, configure, doc/Makefile.in: Regenerate.
gas:
* configure.in (REPORT_BUGS_TEXI): Define to Texinfo version of
bug-reporting URL.
* doc/Makefile.am (gasver.texi): Define BUGURL.
* doc/as.texinfo: Use BUGURL.
* Makefile.in, configure, doc/Makefile.in: Regenerate.
ld:
* configure.in (REPORT_BUGS_TEXI): Define to Texinfo version of
bug-reporting URL.
* Makefile.am (ldver.texi): Define BUGURL.
* ld.texinfo: Use BUGURL.
* Makefile.in, configure: Regenerate.
* config/tc-mips.c (mips_set_options, mips_opts, file_ase_dspr2,
ISA_SUPPORTS_DSPR2_ASE, MIPS_CPU_ASE_DSPR2): Add DSP R2 ASE support.
(macro_build): Add case '2'.
(macro): Expand M_BALIGN to nop, packrl.ph or balign.
(validate_mips_insn): Add support for balign instruction.
(mips_ip): Handle DSP R2 instructions. Support balign instruction.
(OPTION_DSPR2, OPTION_NO_DSPR2, OPTION_COMPAT_ARCH_BASE,
md_parse_option, mips_after_parse_args): Add -mdspr2 and -mno-dspr2
command line options.
(s_mipsset): Add support for .set dspr2 and .set nodspr2 directives.
(md_show_usage): Add -mdspr2 and -mno-dspr2 help output.
* doc/c-mips.texi, doc/as.texinfo: Document -mdspr2, -mno-dspr2,
.set dspr2, .set nodspr2.
[ gas/testsuite/ChangeLog ]
* gas/mips/mips32-dspr2.s, gas/mips/mips32-dspr2.d: New test for
DSP R2.
* gas/mips/mips.exp: Run new test.
[ include/opcode/Changelog ]
* mips.h (OP_SH_BP, OP_MASK_BP): Add support for balign instruction.
(INSN_DSPR2): Add flag for DSP R2 instructions.
(M_BALIGN): New macro.
[ opcodes/ChangeLog ]
* mips-dis.c (mips_arch_choices): Add DSP R2 support.
(print_insn_args): Add support for balign instruction.
* mips-opc.c (D33): New shortcut for DSP R2 instructions.
(mips_builtin_opcodes): Add DSP R2 instructions.
[ sim/mips/ChangeLog ]
* Makefile.in (IGEN_INCLUDE): Add dsp2.igen.
* configure.ac (mips*-sde-elf*, mipsisa32r2*-*-*, mipsisa64r2*-*-*):
Add dsp2 to sim_igen_machine.
* configure: Regenerate.
* dsp.igen (do_ph_op): Add MUL support when op = 2.
(do_ph_mulq): New function to support mulq_rs.ph and mulq_s.ph.
(mulq_rs.ph): Use do_ph_mulq.
(MFHI, MFLO, MTHI, MTLO): Move these instructions to mips.igen.
* mips.igen: Add dsp2 model and include dsp2.igen.
(MFHI, MFLO, MTHI, MTLO): Extend these instructions for
for *mips32r2, *mips64r2, *dsp.
(MADD, MADDU, MSUB, MSUBU, MULT, MULTU): Extend these instructions
for *mips32r2, *mips64r2, *dsp2.
* dsp2.igen: New file for MIPS DSP REV 2 ASE.
[ sim/testsuite/sim/mips/ChangeLog ]
* basic.exp: Run the dsp2 test.
* utils-dsp.inc (dspckacc_astio, dspck_tsimm): New macro.
* mips32-dsp2.s: New test.
option as volatile so that they can be overridden later on by a
.set directive. This maintains compatibility with the behaviour
of earlier versions of the assembler.
* doc/as.texinfo (--defsym): Document that the defined symbol's
value can be overridden via a .set directive.
personality and lsda.
(struct cie_entry): Add per_encoding, lsda_encoding and personality.
(alloc_fde_entry): Initialize per_encoding and lsda_encoding.
(cfi_pseudo_table): Handle .cfi_personality and .cfi_lsda.
(dot_cfi_personality, dot_cfi_lsda, encoding_size): New functions.
(output_cie): Output personality including its encoding and LSDA encoding.
(output_fde): Output LSDA.
(select_cie_for_fde): Don't share CIE if personality, its encoding or
LSDA encoding are different. Copy the 3 fields from fde_entry to
cie_entry.
* doc/as.texinfo (.cfi_personality, .cfi_lsda): Document.
* gas/cfi/cfi-common-6.d: New test.
* gas/cfi/cfi-common-6.s: New.
* gas/cfi/cfi.exp: Add cfi-common-6 test.
Add xref to "Symbol Names".
(L): Refer to "local symbols" instead of "local labels". Move
definition to "Symbol Names" section; add xref to that section.
(Symbol Names): Use "Local Symbol Names" section to define local
symbols. Add "Local Labels" heading for description of temporary
forward/backward labels, and refer to those as "local labels".
* doc/as.texi: Fix spelling typo: branchs => branches.
* doc/c-m68hc11.texi: Likewise.
* config/tc-m68hc11.c: Likewise.
Support old spelling of command line switch for backwards compatibility.
2006-05-11 Carlos O'Donell <carlos@codesourcery.com>
* bfd.texinfo: Rename "Index" to "BFD Index"
gas/
2006-05-11 Carlos O'Donell <carlos@codesourcery.com>
* doc/as.texinfo: Rename "Index" to "AS Index",
and "ABORT" to "ABORT (COFF)".
ld/
2006-05-11 Carlos O'Donell <carlos@codesourcery.com>
* ld.texinfo: Rename "Index" to "LD Index"
- allowing true forward references (which will always assume the referenced
symbols have at the point of use) through the new .eqv pseudo-op and the
new == operator
- disallowing changing .equiv-generated equates (so that the protection this
provides is both forward and backward)
- snapshotting equates when their value gets changed so that previous uses
don't get affected by the new value.
- allowing expressions in places where absolute expressions (or register
names) are needed which were not completely resolvable at the point of
their definition but which are fully resolvable at the point of use
In addition it fixes PR/288.
