(unpack_instr): Fix representation of segmented addresses.
(intr_name): Added, contains names of the parameters to the EI/DI
instructions.
(unparse_instr): Fix display of EI/DI parameters.
* ia64-asmtab.c: Regenerate.
* gas/ia64/dependency-1.s: New file: Test read before write dependency.
* gas/ia64/dependency-1.d: New file: Expected assembly results.
* gas/ia64/ia64.exp: Run the new test.
S390_OPCODE_ZARCH.
(print_insn_s390): Use new modes field of s390_opcodes.
* s390-mkopc.c (ARCHBITS_ESAONLY, ARCHBITS_ESA, ARCHBITS_ESAME): Remove.
(s390_opcode_mode_val, s390_opcode_cpu_val): New enums.
(struct op_struct): Remove archbits. Add mode_bits and min_cpu.
(insertOpcode): Replace archbits by min_cpu and mode_bits.
(dumpTable): Write mode_bits and min_cpu instead of archbits.
(main): Adapt to new format in s390-opcode.txt.
* s390-opc.c (s390_opformats): Replace archbits by min_cpu and
mode_bits.
* s390-opc.txt: Replace archbits by min_cpu and mode_bits.
* mips-dis.c (print_insn_args): Use position extracted by "+A"
to calculate size for "+B". Redo code for "+C" so it shares
the same style as "+A" and "+B" now do.
* mips-dis.c: Update copyright years.
(print_insn_arg): Rename to...
(print_insn_args): This, returning void. Process the whole
string of args rather than a single one. Reindent.
(print_insn_mips): Update to match the above.
2002-12-31 Chris Demetriou <cgd@broadcom.com>
* config/tc-mips.c (validate_mips_insn, mips_ip): Recognize
the "+D" operand, which will be used only by the disassembler.
[ gas/testsuite/ChangeLog ]
2002-12-31 Chris Demetriou <cgd@broadcom.com>
* gas/mips/cp0sel-names-mips32.d: New test.
* gas/mips/cp0sel-names-mips32r2.d: New test.
* gas/mips/cp0sel-names-mips64.d: New test.
* gas/mips/cp0sel-names-numeric.d: New test.
* gas/mips/cp0sel-names-sb1.d: New test.
* gas/mips/cp0sel-names.s: New test source file.
* gas/mips/mips.exp: Run new tests.
[ include/opcode/ChangeLog ]
2002-12-31 Chris Demetriou <cgd@broadcom.com>
* mips.h: Note that the "+D" operand type name is now used.
[ opcodes/ChangeLog ]
2002-12-31 Chris Demetriou <cgd@broadcom.com>
* mips-dis.c (mips_cp0sel_name): New structure.
(mips_cp0sel_names_mips3264, mips_cp0sel_names_mips3264r2)
(mips_cp0sel_names_sb1): New arrays.
(mips_arch_choice): New structure members "cp0sel_names" and
"cp0sel_names_len".
(mips_arch_choices): Add references to new cp0sel_names arrays
as appropriate, and make all existing entries reference
appropriate mips_XXX_names_numeric arrays rather than simply
using NULL.
(mips_cp0sel_names, mips_cp0sel_names_len): New variables.
(lookup_mips_cp0sel_name): New function.
(set_default_mips_dis_options): Set mips_cp0sel_names and
mips_cp0sel_names_len as appropriate. Remove now-unnecessary
checks for NULL register name arrays.
(parse_mips_dis_option): Likewise.
(print_insn_arg): Handle "+D" operand type.
* mips-opc.c (mips_builtin_opcodes): Add new "+D" variants
of mfc0, mtc0, dmfc0, and dmtc0 to print CP0+sel register
names symbolically.
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* aoutx.h (NAME(aout,machine_type)): Add bfd_mach_mipsisa32r2 case.
* archures.c (bfd_mach_mipsisa32r2): New define.
* bfd-in2.h: Regenerate.
* cpu-mips.c (I_mipsisa32r2): New enum value.
(arch_info_struct): Add entry for I_mipsisa32r2.
* elfxx-mips.c (elf_mips_isa, _bfd_elf_mips_mach)
(_bfd_mips_elf_print_private_bfd_data): Handle E_MIPS_ARCH_32R2.
(_bfd_mips_elf_final_write_processing): Add
bfd_mach_mipsisa32r2 case.
(_bfd_mips_elf_merge_private_bfd_data): Handle merging of
binaries marked as using MIPS32 Release 2.
[ binutils/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* doc/binutils.texi (objdump): Note MIPS HWR (Hardware Register)
changes in MIPS -M options.
[ gas/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* configure.in: Recognize mipsisa32r2, mipsisa32r2el, and
CPU variants.
* configure: Regenerate.
* config/tc-mips.c (ISA_HAS_DROR, ISA_HAS_ROR): New defines.
(macro_build): Handle "K" operand.
(macro2): Use ISA_HAS_DROR and ISA_HAS_ROR in the places where
CPU_HAS_DROR and CPU_HAS_ROR are currently used.
(mips_ip): New variable "lastpos", and implement "+A", "+B",
and "+C" operands for MIPS32 Release 2 ins/ext instructions.
Implement "K" operand for MIPS32 Release 2 rdhwr instruction.
(validate_mips_insn): Implement "+" as a way to extend the
allowed operands, and implement "K", "+A", "+B", and "+C"
operands.
(OPTION_MIPS32R2): New define.
(md_longopts): Add entry for OPTION_MIPS32R2.
(OPTION_ELF_BASE): Adjust to accomodate OPTIONS_MIPS32R2.
(md_parse_option): Handle OPTION_MIPS32R2.
(s_mipsset): Reimplement handling of ".set mipsN" options
and add support for ".set mips32r2".
(mips_cpu_info_table): Add entry for "mips32r2" (MIPS32 Release 2).
(md_show_usage): Document "-mips32r2" option.
* doc/as.texinfo: Document "-mips32r2" option.
* doc/c-mips.texi: Likewise.
[ gas/testsuite/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* gas/mips/cp0-names-mips32r2.d: New test.
* gas/mips/hwr-names-mips32r2.d: New test.
* gas/mips/hwr-names-numeric.d: New test.
* gas/mips/hwr-names.s: New test source file.
* gas/mips/mips32r2.d: New test.
* gas/mips/mips32r2.s: New test source file.
* gas/mips/mips32r2-ill.l: New test.
* gas/mips/mips32r2-ill.s: New test source file.
* gas/mips/mips.exp: Add mips32r2 architecture data array
entry. Run new tests mentioned above.
[ include/elf/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* mips.h (E_MIPS_ARCH_32R2): New define.
[ include/opcode/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* mips.h: Document "+" as the start of two-character operand
type names, and add new "K", "+A", "+B", and "+C" operand types.
(OP_MASK_INSMSB, OP_SH_INSMSB, OP_MASK_EXTMSB)
(OP_SH_EXTMSB, INSN_ISA32R2, ISA_MIPS32R2, CPU_MIPS32R2): New
defines.
[ opcodes/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* mips-dis.c (mips_cp0_names_mips3264r2, mips_hwr_names_numeric)
(mips_hwr_names_mips3264r2): New arrays.
(mips_arch_choice): New "hwr_names" member.
(mips_arch_choices): Adjust for structure change, and add a new
entry for "mips32r2" ISA.
(mips_hwr_names): New variable.
(set_default_mips_dis_options): Set mips_hwr_names.
(parse_mips_dis_option): New "hwr-names" option which sets
mips_hwr_names, and adjust "reg-names=ARCH" to set mips_hwr_names.
(print_insn_arg): Change return type to "int"
and use that to indicate number of characters consumed.
Add support for "+" operand extension character, "+A", "+B",
"+C", and "K" operands.
(print_insn_mips): Adjust for changes to print_insn_arg.
(print_mips_disassembler_options): Adjust for "hwr-names"
addition and "reg-names" change.
* mips-opc (I33): New define (shorthand for INSN_ISA32R2).
(mips_builtin_opcodes): Note that "nop" and "ssnop" are special
forms of "sll". Add new MIPS32 Release 2 instructions: ehb,
di, ei, ext, ins, jr.hb, jalr.hb, mfhc1, mfhc2, mthc1, mthc2,
rdhwr, rdpgpr, seb, seh, synci, wrpgpr, wsbh.
Note that hardware rotate instructions (ror, rorv) can be
used on MIPS32 Release 2, and add the official mnemonics
for them (rotr, rotrv) and the similar "rotl" mnemonic for
left-rotate.
2002-12-18 Chris Demetriou <cgd@broadcom.com>
* mips-opc.c (mips_builtin_opcodes): Remove one "ror" and two
"dror" entries, and reorder the remaining "dror" and "ror" entries.
[ gas/ChangeLog ]
2002-12-18 Chris Demetriou <cgd@broadcom.com>
* config/tc-mips.c (macro): In M_DROL, M_DROR, M_ROL, and M_ROR,
use hardware rotate ops as appropriate. In M_DROL_I, M_DROR_I,
M_ROL_I, and M_ROR_I, simplify code, clean up warnings, and
arrange not to issue warnings about use of AT when AT is not
actually used.
[ gas/testsuite/ChangeLog ]
2002-12-18 Chris Demetriou <cgd@broadcom.com>
* gas/mips/rol.s: Add ".set noat" and some new instructions to test.
* gas/mips/rol64.s: Likewise.
* gas/mips/rol.l: New file.
* gas/mips/rol.d: Adjust to use rol.l and for rol.s changes.
* gas/mips/rol64.l: New file.
* gas/mips/rol64.d: Adjust to use rol64.l and for rol64.s changes.
* gas/mips/rol-hw.d: New file.
* gas/mips/rol-hw.l: New file.
* gas/mips/rol64-hw.d: New file.
* gas/mips/rol64-hw.l: New file.
* gas/mips/mips.exp: Run rol-hw and rol64-hw tests.
* ppc-opc.c (PMRN): Remove.
(RA): Set to NB + 1.
(powerpc_opcodes): Change PMRN to SPR.
Change all RD to RS.
Change mftb to look like mftbl.
Move mftb before mftbl.
Add mfbbtar.
Add mtbbtar.
Change mfpmr to use PMR.
Change mtpmr to use PMR.
(RD): Remove.
(insert_ev2): Fix mask and shift.
(extract_ev2): Same.
(insert_ev4): Same.
(extract_ev4): Same.
(PMR): Define.
(extract_pmrn): Remove.
(insert_pmrn): Remove.
(print_indexed_operand): Need an adjustment for some PC-relative
operand modes; print the final address of PC-relative modes.
(print_insn): Take into account movw/movb to adjust the PC-relative
operand addresses.
* avr-dis.c: Include libiberty.h (for xmalloc).
(struct avr_opcodes_s): Remove 'bin_mask' field (it's
automatically computed in the init routine).
(AVR_INSN): No longer provide bin_mask field in initializer.
(avr_opcodes_s): Declare as const.
(print_insn_avr): Store the bin_mask field in a separate table
(allocated with xmalloc); iterate through it at the same time as
we iterate through the opcodes.
* h8300.h (h8_opcode): Remove 'length' field.
(h8_opcodes): Mark as 'const' (both the declaration and
definition). Modify initializer and initializer macros to no
longer initialize the length field.
2002-11-11 Klee Dienes <kdienes@apple.com>
* h8300-dis.c: Include libiberty.h (for xmalloc).
(struct h8_instruction): New type, used to wrap h8_opcodes with a
length field (computed at run-time).
(h8_instructions): New variable.
(bfd_h8_disassemble_init): Allocate the storage for
h8_instructions. Fill h8_instructions with pointers to the
appropriate opcode and the correct value for the length field.
(bfd_h8_disassemble): Iterate through h8_instructions instead of
h8_opcodes.
* arc.h (arc_ext_opcodes): Declare as extern.
(arc_ext_operands): Declare as extern.
* i860.h (i860_opcodes): Declare as const.
2002-11-18 Klee Dienes <kdienes@apple.com>
* arc-opc.c (arc_ext_opcodes): Define.
(arc_ext_operands): Define.
* i386-dis.c (Suffix3DNow): Declare as const.
* arm-opc.h (arm_opcodes): Declare as const.
(thumb_opcodes): Declare as const.
* h8500-opc.h (h8500_table): Declare as const.
(h8500_table): Use a NULL for the opcode in the terminator, so
that code testing (opcode->name) behaves correctly.
* mcore-opc.h (mcore_table): Declare as const.
* sh-opc.h (sh_table): Declare as const.
* w65-opc.h (optable): Declare as const.
* z8k-opc.h (z8k_table): Declare as const.
parameters. Added support for new opcode-list format. General
error message fixups.
(c4x_inst_add): Reject insn not for our CPU
(md_begin): Added matrix for setting the proper opcode-level &
device-flags according to cpu type and revision. Rewrite the
opcode hasher.
(c4x_operand_parse): Fix opcode bug
(c4x_operands_match): New function argument. Added dry-run
mechanism, that is optional error generation. Added constraint 'i'
and 'j'.
(c4x_insn_check): Added new function for post-verification of the
generated insn.
(md_assemble): Check all opcodes before croaking because of an
argument mismatch. Need this to be able to fully support
ortogonally arguments.
(md_parse_options): Revised commandprompt swicthes and added new
ones.
(md_show_usage): Complete rewrite of printout.
* gas/testsuite/gas/tic4x/addressing.s: Fix bug in one insn
* gas/testsuite/gas/tic4x/addressing_c3x.d: Update thereafter
* gas/testsuite/gas/tic4x/addressing_c4x.d: Update thereafter
* gas/testsuite/gas/tic4x/allopcodes.S: Add support for new
opclass.h changes
* gas/testsuite/gas/tic4x/opclasses.h: Added testsuites for
the new enhanced opcodes.
* gas/testsuite/gas/tic4x/opcodes.s: Regenerate
* gas/testsuite/gas/tic4x/opcodes_c3x.d: Update from above
* gas/testsuite/gas/tic4x/opcodes_c4x.d: Update from above
* gas/testsuite/gas/tic4x/opcodes_new.d: Added new testsuite for
the enhanced and special insns.
* gas/testsuite/gas/tic4x/tic4x.exp: Added the opcodes_new testsuite
* include/opcode/tic4x.h: File reordering. Added enhanced opcodes.
* opcodes/tic4x-dis.c: Added support for enhanced and special
insn.
(c4x_print_op): Added insn class 'i' and 'j'
(c4x_hash_opcode_special): Add to support special insn
(c4x_hash_opcode): Update to support the new opcode-list
format. Add support for the new special insns.
(c4x_disassemble): New opcode-list support.
* m88k-dis.c: Include libiberty.h (for xmalloc).
(HASHTAB): New type, used to build instruction hash tables.
Contains a pointer to an INSTAB and a pointer to the next hash
chain entry.
(instructions): Move definition from m88k.h; remove initialization
of 'next' field.
(hashtable): Now an aray of pointer-to-HASHTAB, not INSTAB.
(printop): Mark pointer to OPSPEC as const.
(install): Remove; fold into init_disasm.
(m88kdis): Update to ihashtab_initialized to 1 after calling
init_disasm. entry_ptr now iterates through HASHTABs, not
INSTABs.
(init_disasm): Iterate through the instructions and add to
hashtable[].
(c4x_operands_match): Added check for 8-bits LDF insn. Give
warning when using constant direct bigger than 2^16. Add the new
arguments.
* include/opcode/tic4x.h: Major rewrite of entire file. Define
instruction classes, and put each instruction into a class.
* opcodes/tic4x-dis.c: (c4x_print_op): Add support for the new
argument format. Fix bug in 'N' register printer.
banks and fix disassembling of call instruction.
(print_indexed_operand): New param to tell whether
it was an indirect addressing operand (for disassembling call).
immediate offset in "dla" and "la" expansions.
* gas/mips/empic.d: Treat "addiu" and "daddiu" as equivalent when
$0 is source.
* mips-opc.c (mips_builtin_opcodes): Remove "dla" and "la" as
aliases to "daddiu" and "addiu".
